If one improperly writes a rockchip,pins property, the pinctrl driver
basically just states that one in the myriad of pinctrl nodes is
improper but does not tell you which one.
Instead, let's print the full name of the Device Tree node that is
improper as well as provide more context on what the expected content
is.
Note that this should be rather unnecessary if one reads the output of
the dtbs_check as it would be highlighted as an error.
Signed-off-by: Quentin Schulz <quentin.schulz@cherry.de>
Reviewed-by: Heiko Stuebner <heiko@sntech.de>
Link: https://lore.kernel.org/20241002-pinctrl-rockchip-error-modulo-4-v1-1-4addb4e5732a@cherry.de
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
The sx150x driver uses a rbtree register cache with no obvious reason for
specifically preferring it. The maple tree register cache is based on a
more modern data structure and makes implementation decisions more suitable
for modern systems so let's switch the driver to use that. No functional
change.
Signed-off-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/20240924-pinctl-sx150x-maple-v1-1-17dcfefefd17@kernel.org
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Configuration of the K230 is similar to that of the K210. However, in
K210, the 256 functions for each pin are shared, whereas in K230,
multiplex functions are different for every pin.
`drv_data` of `pinctrl_pin_desc` is pointing to currently activated
group, which is used to print the name of current function of pin in
`pin_dbg_show` and will be updated in `set_mux`, so they are not set
const.
Signed-off-by: Ze Huang <18771902331@163.com>
Link: https://lore.kernel.org/20240926-k230-pinctrl-v2-2-a9a36fba4b34@163.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Making pinctrl drivers and subsequently the pinctrl framework
user-controllable, allows building a kernel without this.
While in many (most) cases, this could make the system unbootable, it
does allow building smaller kernels for those situations where picntrl
is not needed.
One such situation is when building a kernel for NXP LS1021A systems,
which does not have run-time controllable pinctrl, so pinctrl framework
and drivers are 100% dead-weight.
Signed-off-by: Esben Haabendal <esben@geanix.com>
Acked-by: Shawn Guo <shawnguo@kernel.org>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://lore.kernel.org/20240506-imx-pinctrl-optional-v2-1-bdff75085156@geanix.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Add compatible for TLMM block representing support on SA8255p.
SA8255p uses the same TLMM block as SA8775p however the ownership
of pins are split between Firmware VM and Linux VM on SA8255p. For
example, pins used by UART are owned and configured by Firmware VM
while pins used by ethernet are owned and configured by Linux VM.
Therefore, adding a sa8255p specific compatible to mark the difference.
Signed-off-by: Nikunj Kela <quic_nkela@quicinc.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/20240905200218.3810712-1-quic_nkela@quicinc.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Add Pinctrl support for Xilinx Versal platform.
Driver checks for firmware support to retrieve the Pin information, if it
is supported then proceed further otherwise it returns error saying
operation not supported. Latest Xilinx Platform Management Firmware must
be used to make use of the Pinctrl driver for Versal platform.
Signed-off-by: Sai Krishna Potthuri <sai.krishna.potthuri@amd.com>
Link: https://lore.kernel.org/20240906110113.3154327-4-sai.krishna.potthuri@amd.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
The cpu_emergency_register_virt_callback() function is used
unconditionally by the x86 kvm code, but it is declared (and defined)
conditionally:
#if IS_ENABLED(CONFIG_KVM_INTEL) || IS_ENABLED(CONFIG_KVM_AMD)
void cpu_emergency_register_virt_callback(cpu_emergency_virt_cb *callback);
...
leading to a build error when neither KVM_INTEL nor KVM_AMD support is
enabled:
arch/x86/kvm/x86.c: In function ‘kvm_arch_enable_virtualization’:
arch/x86/kvm/x86.c:12517:9: error: implicit declaration of function ‘cpu_emergency_register_virt_callback’ [-Wimplicit-function-declaration]
12517 | cpu_emergency_register_virt_callback(kvm_x86_ops.emergency_disable_virtualization_cpu);
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
arch/x86/kvm/x86.c: In function ‘kvm_arch_disable_virtualization’:
arch/x86/kvm/x86.c:12522:9: error: implicit declaration of function ‘cpu_emergency_unregister_virt_callback’ [-Wimplicit-function-declaration]
12522 | cpu_emergency_unregister_virt_callback(kvm_x86_ops.emergency_disable_virtualization_cpu);
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Fix the build by defining empty helper functions the same way the old
cpu_emergency_disable_virtualization() function was dealt with for the
same situation.
Maybe we could instead have made the call sites conditional, since the
callers (kvm_arch_{en,dis}able_virtualization()) have an empty weak
fallback. I'll leave that to the kvm people to argue about, this at
least gets the build going for that particular config.
Fixes: 590b09b1d8 ("KVM: x86: Register "emergency disable" callbacks when virt is enabled")
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Sean Christopherson <seanjc@google.com>
Cc: Kai Huang <kai.huang@intel.com>
Cc: Chao Gao <chao.gao@intel.com>
Cc: Farrah Chen <farrah.chen@intel.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Pull mailbox updates from Jassi Brar:
- fix kconfig dependencies (mhu-v3, omap2+)
- use devie name instead of genereic imx_mu_chan as interrupt name
(imx)
- enable sa8255p and qcs8300 ipc controllers (qcom)
- Fix timeout during suspend mode (bcm2835)
- convert to use use of_property_match_string (mailbox)
- enable mt8188 (mediatek)
- use devm_clk_get_enabled helpers (spreadtrum)
- fix device-id typo (rockchip)
* tag 'mailbox-v6.12' of git://git.kernel.org/pub/scm/linux/kernel/git/jassibrar/mailbox:
mailbox, remoteproc: omap2+: fix compile testing
dt-bindings: mailbox: qcom-ipcc: Document QCS8300 IPCC
dt-bindings: mailbox: qcom-ipcc: document the support for SA8255p
dt-bindings: mailbox: mtk,adsp-mbox: Add compatible for MT8188
mailbox: Use of_property_match_string() instead of open-coding
mailbox: bcm2835: Fix timeout during suspend mode
mailbox: sprd: Use devm_clk_get_enabled() helpers
mailbox: rockchip: fix a typo in module autoloading
mailbox: imx: use device name in interrupt name
mailbox: ARM_MHU_V3 should depend on ARM64
Pull i2c fixes from Wolfram Sang:
- fix DesignWare driver ENABLE-ABORT sequence, ensuring ABORT can
always be sent when needed
- check for PCLK in the SynQuacer controller as an optional clock,
allowing ACPI to directly provide the clock rate
- KEBA driver Kconfig dependency fix
- fix XIIC driver power suspend sequence
* tag 'i2c-for-6.12-rc1-additional_fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux:
i2c: xiic: Fix pm_runtime_set_suspended() with runtime pm enabled
i2c: keba: I2C_KEBA should depend on KEBA_CP500
i2c: synquacer: Deal with optional PCLK correctly
i2c: designware: fix controller is holding SCL low while ENABLE bit is disabled
Pull dma-mapping fix from Christoph Hellwig:
- handle chained SGLs in the new tracing code (Christoph Hellwig)
* tag 'dma-mapping-6.12-2024-09-29' of git://git.infradead.org/users/hch/dma-mapping:
dma-mapping: fix DMA API tracing for chained scatterlists
Pull more SCSI updates from James Bottomley:
"These are mostly minor updates.
There are two drivers (lpfc and mpi3mr) which missed the initial
pull and a core change to retry a start/stop unit which affect
suspend/resume"
* tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: (32 commits)
scsi: lpfc: Update lpfc version to 14.4.0.5
scsi: lpfc: Support loopback tests with VMID enabled
scsi: lpfc: Revise TRACE_EVENT log flag severities from KERN_ERR to KERN_WARNING
scsi: lpfc: Ensure DA_ID handling completion before deleting an NPIV instance
scsi: lpfc: Fix kref imbalance on fabric ndlps from dev_loss_tmo handler
scsi: lpfc: Restrict support for 32 byte CDBs to specific HBAs
scsi: lpfc: Update phba link state conditional before sending CMF_SYNC_WQE
scsi: lpfc: Add ELS_RSP cmd to the list of WQEs to flush in lpfc_els_flush_cmd()
scsi: mpi3mr: Update driver version to 8.12.0.0.50
scsi: mpi3mr: Improve wait logic while controller transitions to READY state
scsi: mpi3mr: Update MPI Headers to revision 34
scsi: mpi3mr: Use firmware-provided timestamp update interval
scsi: mpi3mr: Enhance the Enable Controller retry logic
scsi: sd: Fix off-by-one error in sd_read_block_characteristics()
scsi: pm8001: Do not overwrite PCI queue mapping
scsi: scsi_debug: Remove a useless memset()
scsi: pmcraid: Convert comma to semicolon
scsi: sd: Retry START STOP UNIT commands
scsi: mpi3mr: A performance fix
scsi: ufs: qcom: Update MODE_MAX cfg_bw value
...
Pull more bcachefs updates from Kent Overstreet:
"Assorted minor syzbot fixes, and for bigger stuff:
Fix two disk accounting rewrite bugs:
- Disk accounting keys use the version field of bkey so that journal
replay can tell which updates have been applied to the btree.
This is set in the transaction commit path, after we've gotten our
journal reservation (and our time ordering), but the
BCH_TRANS_COMMIT_skip_accounting_apply flag that journal replay
uses was incorrectly skipping this for new updates generated prior
to journal replay.
This fixes the underlying cause of an assertion pop in
disk_accounting_read.
- A couple of fixes for disk accounting + device removal.
Checking if acocunting replicas entries were marked in the
superblock was being done at the wrong point, when deltas in the
journal could still zero them out, and then additionally we'd try
to add a missing replicas entry to the superblock without checking
if it referred to an invalid (removed) device.
A whole slew of repair fixes:
- fix infinite loop in propagate_key_to_snapshot_leaves(), this fixes
an infinite loop when repairing a filesystem with many snapshots
- fix incorrect transaction restart handling leading to occasional
"fsck counted ..." warnings
- fix warning in __bch2_fsck_err() for bkey fsck errors
- check_inode() in fsck now correctly checks if the filesystem was
clean
- there shouldn't be pending logged ops if the fs was clean, we now
check for this
- remove_backpointer() doesn't remove a dirent that doesn't actually
point to the inode
- many more fsck errors are AUTOFIX"
* tag 'bcachefs-2024-09-28' of git://evilpiepirate.org/bcachefs: (35 commits)
bcachefs: check_subvol_path() now prints subvol root inode
bcachefs: remove_backpointer() now checks if dirent points to inode
bcachefs: dirent_points_to_inode() now warns on mismatch
bcachefs: Fix lost wake up
bcachefs: Check for logged ops when clean
bcachefs: BCH_FS_clean_recovery
bcachefs: Convert disk accounting BUG_ON() to WARN_ON()
bcachefs: Fix BCH_TRANS_COMMIT_skip_accounting_apply
bcachefs: Check for accounting keys with bversion=0
bcachefs: rename version -> bversion
bcachefs: Don't delete unlinked inodes before logged op resume
bcachefs: Fix BCH_SB_ERRS() so we can reorder
bcachefs: Fix fsck warnings from bkey validation
bcachefs: Move transaction commit path validation to as late as possible
bcachefs: Fix disk accounting attempting to mark invalid replicas entry
bcachefs: Fix unlocked access to c->disk_sb.sb in bch2_replicas_entry_validate()
bcachefs: Fix accounting read + device removal
bcachefs: bch_accounting_mode
bcachefs: fix transaction restart handling in check_extents(), check_dirents()
bcachefs: kill inode_walker_entry.seen_this_pos
...
Pull x86 fixes from Ingo Molnar:
"Fix TDX MMIO #VE fault handling, and add two new Intel model numbers
for 'Pantherlake' and 'Diamond Rapids'"
* tag 'x86-urgent-2024-09-29' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/cpu: Add two Intel CPU model numbers
x86/tdx: Fix "in-kernel MMIO" check
Pull coccinelle updates from Julia Lawall:
"Extend string_choices.cocci to use more available helpers
Ten patches from Hongbo Li extending string_choices.cocci with the
complete set of functions offered by include/linux/string_choices.h.
One patch from myself reducing the number of redundant cases that are
checked by Coccinelle, giving a small performance improvement"
* tag 'cocci-for-6.12' of git://git.kernel.org/pub/scm/linux/kernel/git/jlawall/linux:
Reduce Coccinelle choices in string_choices.cocci
coccinelle: Remove unnecessary parentheses for only one possible change.
coccinelle: Add rules to find str_yes_no() replacements
coccinelle: Add rules to find str_on_off() replacements
coccinelle: Add rules to find str_write_read() replacements
coccinelle: Add rules to find str_read_write() replacements
coccinelle: Add rules to find str_enable{d}_disable{d}() replacements
coccinelle: Add rules to find str_lo{w}_hi{gh}() replacements
coccinelle: Add rules to find str_hi{gh}_lo{w}() replacements
coccinelle: Add rules to find str_false_true() replacements
coccinelle: Add rules to find str_true_false() replacements
Pull kselftest fix from Shuah Khan:
"One urgent fix to vDSO as automated testing is failing due to this
bug"
* tag 'linux_kselftest-next-6.12-rc1-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest:
selftests: vDSO: align stack for O2-optimized memcpy
The isomorphism neg_if_exp negates the test of a ?: conditional,
making it unnecessary to have an explicit case for a negated test
with the branches inverted.
At the same time, we can disable neg_if_exp in cases where a
different API function may be more suitable for a negated test.
Finally, in the non-patch cases, E matches an expression with
parentheses around it, so there is no need to mention ()
explicitly in the pattern. The () are still needed in the patch
cases, because we want to drop them, if they are present.
Signed-off-by: Julia Lawall <Julia.Lawall@inria.fr>
Bartosz Golaszewski
Andrei Stefanescu
Drew Fustini
Linus Walleij
Rosen Penev
Esben Haabendal
clingfei
Quentin Schulz
Mark Brown
Uwe Kleine-König
Lijuan Gao
Neil Armstrong
Ze Huang
Sricharan Ramabadhran
Emil Renner Berthing
Daniel Machon
Nikunj Kela
Geert Uytterhoeven
Sai Krishna Potthuri
Linus Torvalds
Ingo Molnar
Julia Lawall