mirror of
https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git
synced 2026-09-22 09:34:56 +02:00
2ce3d282bd5050fca8577defeff08ada0d55d062
1382378
Commits
| Author | SHA1 | Message | Date | |
|---|---|---|---|---|
 wangzijie
|
2ce3d282bd |
proc: fix missing pde_set_flags() for net proc files
To avoid potential UAF issues during module removal races, we use
pde_set_flags() to save proc_ops flags in PDE itself before
proc_register(), and then use pde_has_proc_*() helpers instead of directly
dereferencing pde->proc_ops->*.
However, the pde_set_flags() call was missing when creating net related
proc files. This omission caused incorrect behavior which FMODE_LSEEK was
being cleared inappropriately in proc_reg_open() for net proc files. Lars
reported it in this link[1].
Fix this by ensuring pde_set_flags() is called when register proc entry,
and add NULL check for proc_ops in pde_set_flags().
[wangzijie1@honor.com: stash pde->proc_ops in a local const variable, per Christian]
Link: https://lkml.kernel.org/r/20250821105806.1453833-1-wangzijie1@honor.com
Link: https://lkml.kernel.org/r/20250818123102.959595-1-wangzijie1@honor.com
Link: https://lore.kernel.org/all/20250815195616.64497967@chagall.paradoxon.rec/ [1]
Fixes:
|
||
 Sumanth Korikkar
|
c3576889d8 |
mm: fix accounting of memmap pages
For !CONFIG_SPARSEMEM_VMEMMAP, memmap page accounting is currently done
upfront in sparse_buffer_init(). However, sparse_buffer_alloc() may
return NULL in failure scenario.
Also, memmap pages may be allocated either from the memblock allocator
during early boot or from the buddy allocator. When removed via
arch_remove_memory(), accounting of memmap pages must reflect the original
allocation source.
To ensure correctness:
* Account memmap pages after successful allocation in sparse_init_nid()
and section_activate().
* Account memmap pages in section_deactivate() based on allocation
source.
Link: https://lkml.kernel.org/r/20250807183545.1424509-1-sumanthk@linux.ibm.com
Fixes:
|
||
 Quanmin Yan
|
9f68eabab9 |
mm/damon/core: prevent unnecessary overflow in damos_set_effective_quota()
On 32-bit systems, the throughput calculation in
damos_set_effective_quota() is prone to unnecessary multiplication
overflow. Using mult_frac() to fix it.
Andrew Paniakin also recently found and privately reported this issue, on
64 bit systems. This can also happen on 64-bit systems, once the charged
size exceeds ~17 TiB. On systems running for long time in production,
this issue can actually happen.
More specifically, when a DAMOS scheme having the time quota run for
longtime, throughput calculation can overflow and set esz too small. As a
result, speed of the scheme get unexpectedly slow.
Link: https://lkml.kernel.org/r/20250821125555.3020951-1-yanquanmin1@huawei.com
Fixes:
|
||
 Brian Mak
|
6310c149e5 |
kexec: add KEXEC_FILE_NO_CMA as a legal flag
Commit |
||
 Ada Couprie Diaz
|
51337a9a3a |
kasan: fix GCC mem-intrinsic prefix with sw tags
GCC doesn't support "hwasan-kernel-mem-intrinsic-prefix", only
"asan-kernel-mem-intrinsic-prefix"[0], while LLVM supports both. This is
already taken into account when checking
"CONFIG_CC_HAS_KASAN_MEMINTRINSIC_PREFIX", but not in the KASAN Makefile
adding those parameters when "CONFIG_KASAN_SW_TAGS" is enabled.
Replace the version check with "CONFIG_CC_HAS_KASAN_MEMINTRINSIC_PREFIX",
which already validates that mem-intrinsic prefix parameter can be used,
and choose the correct name depending on compiler.
GCC 13 and above trigger "CONFIG_CC_HAS_KASAN_MEMINTRINSIC_PREFIX" which
prevents `mem{cpy,move,set}()` being redefined in "mm/kasan/shadow.c"
since commit
|
||
 Alexander Gordeev
|
c519c3c0a1 |
mm/kasan: avoid lazy MMU mode hazards
Functions __kasan_populate_vmalloc() and __kasan_depopulate_vmalloc() use
apply_to_pte_range(), which enters lazy MMU mode. In that mode updating
PTEs may not be observed until the mode is left.
That may lead to a situation in which otherwise correct reads and writes
to a PTE using ptep_get(), set_pte(), pte_clear() and other access
primitives bring wrong results when the vmalloc shadow memory is being
(de-)populated.
To avoid these hazards leave the lazy MMU mode before and re-enter it
after each PTE manipulation.
Link: https://lkml.kernel.org/r/0d2efb7ddddbff6b288fbffeeb10166e90771718.1755528662.git.agordeev@linux.ibm.com
Fixes:
|
||
|
Alexander Gordeev
|
08c7c253e0 |
mm/kasan: fix vmalloc shadow memory (de-)population races
While working on the lazy MMU mode enablement for s390 I hit pretty
curious issues in the kasan code.
The first is related to a custom kasan-based sanitizer aimed at catching
invalid accesses to PTEs and is inspired by [1] conversation. The kasan
complains on valid PTE accesses, while the shadow memory is reported as
unpoisoned:
[ 102.783993] ==================================================================
[ 102.784008] BUG: KASAN: out-of-bounds in set_pte_range+0x36c/0x390
[ 102.784016] Read of size 8 at addr 0000780084cf9608 by task vmalloc_test/0/5542
[ 102.784019]
[ 102.784040] CPU: 1 UID: 0 PID: 5542 Comm: vmalloc_test/0 Kdump: loaded Tainted: G OE 6.16.0-gcc-ipte-kasan-11657-gb2d930c4950e #340 PREEMPT
[ 102.784047] Tainted: [O]=OOT_MODULE, [E]=UNSIGNED_MODULE
[ 102.784049] Hardware name: IBM 8561 T01 703 (LPAR)
[ 102.784052] Call Trace:
[ 102.784054] [<00007fffe0147ac0>] dump_stack_lvl+0xe8/0x140
[ 102.784059] [<00007fffe0112484>] print_address_description.constprop.0+0x34/0x2d0
[ 102.784066] [<00007fffe011282c>] print_report+0x10c/0x1f8
[ 102.784071] [<00007fffe090785a>] kasan_report+0xfa/0x220
[ 102.784078] [<00007fffe01d3dec>] set_pte_range+0x36c/0x390
[ 102.784083] [<00007fffe01d41c2>] leave_ipte_batch+0x3b2/0xb10
[ 102.784088] [<00007fffe07d3650>] apply_to_pte_range+0x2f0/0x4e0
[ 102.784094] [<00007fffe07e62e4>] apply_to_pmd_range+0x194/0x3e0
[ 102.784099] [<00007fffe07e820e>] __apply_to_page_range+0x2fe/0x7a0
[ 102.784104] [<00007fffe07e86d8>] apply_to_page_range+0x28/0x40
[ 102.784109] [<00007fffe090a3ec>] __kasan_populate_vmalloc+0xec/0x310
[ 102.784114] [<00007fffe090aa36>] kasan_populate_vmalloc+0x96/0x130
[ 102.784118] [<00007fffe0833a04>] alloc_vmap_area+0x3d4/0xf30
[ 102.784123] [<00007fffe083a8ba>] __get_vm_area_node+0x1aa/0x4c0
[ 102.784127] [<00007fffe083c4f6>] __vmalloc_node_range_noprof+0x126/0x4e0
[ 102.784131] [<00007fffe083c980>] __vmalloc_node_noprof+0xd0/0x110
[ 102.784135] [<00007fffe083ca32>] vmalloc_noprof+0x32/0x40
[ 102.784139] [<00007fff608aa336>] fix_size_alloc_test+0x66/0x150 [test_vmalloc]
[ 102.784147] [<00007fff608aa710>] test_func+0x2f0/0x430 [test_vmalloc]
[ 102.784153] [<00007fffe02841f8>] kthread+0x3f8/0x7a0
[ 102.784159] [<00007fffe014d8b4>] __ret_from_fork+0xd4/0x7d0
[ 102.784164] [<00007fffe299c00a>] ret_from_fork+0xa/0x30
[ 102.784173] no locks held by vmalloc_test/0/5542.
[ 102.784176]
[ 102.784178] The buggy address belongs to the physical page:
[ 102.784186] page: refcount:1 mapcount:0 mapping:0000000000000000 index:0x0 pfn:0x84cf9
[ 102.784198] flags: 0x3ffff00000000000(node=0|zone=1|lastcpupid=0x1ffff)
[ 102.784212] page_type: f2(table)
[ 102.784225] raw: 3ffff00000000000 0000000000000000 0000000000000122 0000000000000000
[ 102.784234] raw: 0000000000000000 0000000000000000 f200000000000001 0000000000000000
[ 102.784248] page dumped because: kasan: bad access detected
[ 102.784250]
[ 102.784252] Memory state around the buggy address:
[ 102.784260] 0000780084cf9500: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
[ 102.784274] 0000780084cf9580: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
[ 102.784277] >0000780084cf9600: fd 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
[ 102.784290] ^
[ 102.784293] 0000780084cf9680: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
[ 102.784303] 0000780084cf9700: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
[ 102.784306] ==================================================================
The second issue hits when the custom sanitizer above is not implemented,
but the kasan itself is still active:
[ 1554.438028] Unable to handle kernel pointer dereference in virtual kernel address space
[ 1554.438065] Failing address: 001c0ff0066f0000 TEID: 001c0ff0066f0403
[ 1554.438076] Fault in home space mode while using kernel ASCE.
[ 1554.438103] AS:00000000059d400b R2:0000000ffec5c00b R3:00000000c6c9c007 S:0000000314470001 P:00000000d0ab413d
[ 1554.438158] Oops: 0011 ilc:2 [#1]SMP
[ 1554.438175] Modules linked in: test_vmalloc(E+) nft_fib_inet(E) nft_fib_ipv4(E) nft_fib_ipv6(E) nft_fib(E) nft_reject_inet(E) nf_reject_ipv4(E) nf_reject_ipv6(E) nft_reject(E) nft_ct(E) nft_chain_nat(E) nf_nat(E) nf_conntrack(E) nf_defrag_ipv6(E) nf_defrag_ipv4(E) nf_tables(E) sunrpc(E) pkey_pckmo(E) uvdevice(E) s390_trng(E) rng_core(E) eadm_sch(E) vfio_ccw(E) mdev(E) vfio_iommu_type1(E) vfio(E) sch_fq_codel(E) drm(E) loop(E) i2c_core(E) drm_panel_orientation_quirks(E) nfnetlink(E) ctcm(E) fsm(E) zfcp(E) scsi_transport_fc(E) diag288_wdt(E) watchdog(E) ghash_s390(E) prng(E) aes_s390(E) des_s390(E) libdes(E) sha3_512_s390(E) sha3_256_s390(E) sha512_s390(E) sha1_s390(E) sha_common(E) pkey(E) autofs4(E)
[ 1554.438319] Unloaded tainted modules: pkey_uv(E):1 hmac_s390(E):2
[ 1554.438354] CPU: 1 UID: 0 PID: 1715 Comm: vmalloc_test/0 Kdump: loaded Tainted: G E 6.16.0-gcc-ipte-kasan-11657-gb2d930c4950e #350 PREEMPT
[ 1554.438368] Tainted: [E]=UNSIGNED_MODULE
[ 1554.438374] Hardware name: IBM 8561 T01 703 (LPAR)
[ 1554.438381] Krnl PSW : 0704e00180000000 00007fffe1d3d6ae (memset+0x5e/0x98)
[ 1554.438396] R:0 T:1 IO:1 EX:1 Key:0 M:1 W:0 P:0 AS:3 CC:2 PM:0 RI:0 EA:3
[ 1554.438409] Krnl GPRS: 0000000000000001 001c0ff0066f0000 001c0ff0066f0000 00000000000000f8
[ 1554.438418] 00000000000009fe 0000000000000009 0000000000000000 0000000000000002
[ 1554.438426] 0000000000005000 000078031ae655c8 00000feffdcf9f59 0000780258672a20
[ 1554.438433] 0000780243153500 00007f8033780000 00007fffe083a510 00007f7fee7cfa00
[ 1554.438452] Krnl Code: 00007fffe1d3d6a0: eb540008000c srlg %r5,%r4,8
00007fffe1d3d6a6: b9020055 ltgr %r5,%r5
#00007fffe1d3d6aa: a784000b brc 8,00007fffe1d3d6c0
>00007fffe1d3d6ae: 42301000 stc %r3,0(%r1)
00007fffe1d3d6b2: d2fe10011000 mvc 1(255,%r1),0(%r1)
00007fffe1d3d6b8: 41101100 la %r1,256(%r1)
00007fffe1d3d6bc: a757fff9 brctg %r5,00007fffe1d3d6ae
00007fffe1d3d6c0: 42301000 stc %r3,0(%r1)
[ 1554.438539] Call Trace:
[ 1554.438545] [<00007fffe1d3d6ae>] memset+0x5e/0x98
[ 1554.438552] ([<00007fffe083a510>] remove_vm_area+0x220/0x400)
[ 1554.438562] [<00007fffe083a9d6>] vfree.part.0+0x26/0x810
[ 1554.438569] [<00007fff6073bd50>] fix_align_alloc_test+0x50/0x90 [test_vmalloc]
[ 1554.438583] [<00007fff6073c73a>] test_func+0x46a/0x6c0 [test_vmalloc]
[ 1554.438593] [<00007fffe0283ac8>] kthread+0x3f8/0x7a0
[ 1554.438603] [<00007fffe014d8b4>] __ret_from_fork+0xd4/0x7d0
[ 1554.438613] [<00007fffe299ac0a>] ret_from_fork+0xa/0x30
[ 1554.438622] INFO: lockdep is turned off.
[ 1554.438627] Last Breaking-Event-Address:
[ 1554.438632] [<00007fffe1d3d65c>] memset+0xc/0x98
[ 1554.438644] Kernel panic - not syncing: Fatal exception: panic_on_oops
This series fixes the above issues and is a pre-requisite for the s390
lazy MMU mode implementation.
test_vmalloc was used to stress-test the fixes.
This patch (of 2):
When vmalloc shadow memory is established the modification of the
corresponding page tables is not protected by any locks. Instead, the
locking is done per-PTE. This scheme however has defects.
kasan_populate_vmalloc_pte() - while ptep_get() read is atomic the
sequence pte_none(ptep_get()) is not. Doing that outside of the lock
might lead to a concurrent PTE update and what could be seen as a shadow
memory corruption as result.
kasan_depopulate_vmalloc_pte() - by the time a page whose address was
extracted from ptep_get() read and cached in a local variable outside of
the lock is attempted to get free, could actually be freed already.
To avoid these put ptep_get() itself and the code that manipulates the
result of the read under lock. In addition, move freeing of the page out
of the atomic context.
Link: https://lkml.kernel.org/r/cover.1755528662.git.agordeev@linux.ibm.com
Link: https://lkml.kernel.org/r/adb258634194593db294c0d1fb35646e894d6ead.1755528662.git.agordeev@linux.ibm.com
Link: https://lore.kernel.org/linux-mm/5b0609c9-95ee-4e48-bb6d-98f57c5d2c31@arm.com/ [1]
Fixes:
|
||
 Yeoreum Yun
|
7a19afee6f |
kunit: kasan_test: disable fortify string checker on kasan_strings() test
Similar to commit |
||
 Zi Yan
|
5bbc2b785e |
selftests/mm: fix FORCE_READ to read input value correctly
FORCE_READ() converts input value x to its pointer type then reads from
address x. This is wrong. If x is a non-pointer, it would be caught it
easily. But all FORCE_READ() callers are trying to read from a pointer
and FORCE_READ() basically reads a pointer to a pointer instead of the
original typed pointer. Almost no access violation was found, except the
one from split_huge_page_test.
Fix it by implementing a simplified READ_ONCE() instead.
Link: https://lkml.kernel.org/r/20250805175140.241656-1-ziy@nvidia.com
Fixes:
|
||
 Sasha Levin
|
9614d8bee6 |
mm/userfaultfd: fix kmap_local LIFO ordering for CONFIG_HIGHPTE
With CONFIG_HIGHPTE on 32-bit ARM, move_pages_pte() maps PTE pages using kmap_local_page(), which requires unmapping in Last-In-First-Out order. The current code maps dst_pte first, then src_pte, but unmaps them in the same order (dst_pte, src_pte), violating the LIFO requirement. This causes the warning in kunmap_local_indexed(): WARNING: CPU: 0 PID: 604 at mm/highmem.c:622 kunmap_local_indexed+0x178/0x17c addr \!= __fix_to_virt(FIX_KMAP_BEGIN + idx) Fix this by reversing the unmap order to respect LIFO ordering. This issue follows the same pattern as similar fixes: - commit |
||
 Edward Adam Davis
|
f46e8ef8bb |
ocfs2: prevent release journal inode after journal shutdown
Before calling ocfs2_delete_osb(), ocfs2_journal_shutdown() has already
been executed in ocfs2_dismount_volume(), so osb->journal must be NULL.
Therefore, the following calltrace will inevitably fail when it reaches
jbd2_journal_release_jbd_inode().
ocfs2_dismount_volume()->
ocfs2_delete_osb()->
ocfs2_free_slot_info()->
__ocfs2_free_slot_info()->
evict()->
ocfs2_evict_inode()->
ocfs2_clear_inode()->
jbd2_journal_release_jbd_inode(osb->journal->j_journal,
Adding osb->journal checks will prevent null-ptr-deref during the above
execution path.
Link: https://lkml.kernel.org/r/tencent_357489BEAEE4AED74CBD67D246DBD2C4C606@qq.com
Fixes:
|
||
 Baptiste Lepers
|
5cc5e030bc |
rust: mm: mark VmaNew as transparent
Unsafe code in VmaNew's methods assumes that the type has the same layout
as the inner `bindings::vm_area_struct`. This is not guaranteed by the
default struct representation in Rust, but requires specifying the
`transparent` representation.
Link: https://lkml.kernel.org/r/20250812132712.61007-1-baptiste.lepers@gmail.com
Fixes:
|
||
 Yin Tirui
|
ee4d098cbc |
of_numa: fix uninitialized memory nodes causing kernel panic
When there are memory-only nodes (nodes without CPUs), these nodes are not
properly initialized, causing kernel panic during boot.
of_numa_init
of_numa_parse_cpu_nodes
node_set(nid, numa_nodes_parsed);
of_numa_parse_memory_nodes
In of_numa_parse_cpu_nodes, numa_nodes_parsed gets updated only for nodes
containing CPUs. Memory-only nodes should have been updated in
of_numa_parse_memory_nodes, but they weren't.
Subsequently, when free_area_init() attempts to access NODE_DATA() for
these uninitialized memory nodes, the kernel panics due to NULL pointer
dereference.
This can be reproduced on ARM64 QEMU with 1 CPU and 2 memory nodes:
qemu-system-aarch64 \
-cpu host -nographic \
-m 4G -smp 1 \
-machine virt,accel=kvm,gic-version=3,iommu=smmuv3 \
-object memory-backend-ram,size=2G,id=mem0 \
-object memory-backend-ram,size=2G,id=mem1 \
-numa node,nodeid=0,memdev=mem0 \
-numa node,nodeid=1,memdev=mem1 \
-kernel $IMAGE \
-hda $DISK \
-append "console=ttyAMA0 root=/dev/vda rw earlycon"
[ 0.000000] Booting Linux on physical CPU 0x0000000000 [0x481fd010]
[ 0.000000] Linux version 6.17.0-rc1-00001-gabb4b3daf18c-dirty (yintirui@local) (gcc (GCC) 12.3.1, GNU ld (GNU Binutils) 2.41) #52 SMP PREEMPT Mon Aug 18 09:49:40 CST 2025
[ 0.000000] KASLR enabled
[ 0.000000] random: crng init done
[ 0.000000] Machine model: linux,dummy-virt
[ 0.000000] efi: UEFI not found.
[ 0.000000] earlycon: pl11 at MMIO 0x0000000009000000 (options '')
[ 0.000000] printk: legacy bootconsole [pl11] enabled
[ 0.000000] OF: reserved mem: Reserved memory: No reserved-memory node in the DT
[ 0.000000] NODE_DATA(0) allocated [mem 0xbfffd9c0-0xbfffffff]
[ 0.000000] node 1 must be removed before remove section 23
[ 0.000000] Zone ranges:
[ 0.000000] DMA [mem 0x0000000040000000-0x00000000ffffffff]
[ 0.000000] DMA32 empty
[ 0.000000] Normal [mem 0x0000000100000000-0x000000013fffffff]
[ 0.000000] Movable zone start for each node
[ 0.000000] Early memory node ranges
[ 0.000000] node 0: [mem 0x0000000040000000-0x00000000bfffffff]
[ 0.000000] node 1: [mem 0x00000000c0000000-0x000000013fffffff]
[ 0.000000] Initmem setup node 0 [mem 0x0000000040000000-0x00000000bfffffff]
[ 0.000000] Unable to handle kernel NULL pointer dereference at virtual address 00000000000000a0
[ 0.000000] Mem abort info:
[ 0.000000] ESR = 0x0000000096000004
[ 0.000000] EC = 0x25: DABT (current EL), IL = 32 bits
[ 0.000000] SET = 0, FnV = 0
[ 0.000000] EA = 0, S1PTW = 0
[ 0.000000] FSC = 0x04: level 0 translation fault
[ 0.000000] Data abort info:
[ 0.000000] ISV = 0, ISS = 0x00000004, ISS2 = 0x00000000
[ 0.000000] CM = 0, WnR = 0, TnD = 0, TagAccess = 0
[ 0.000000] GCS = 0, Overlay = 0, DirtyBit = 0, Xs = 0
[ 0.000000] [00000000000000a0] user address but active_mm is swapper
[ 0.000000] Internal error: Oops: 0000000096000004 [#1] SMP
[ 0.000000] Modules linked in:
[ 0.000000] CPU: 0 UID: 0 PID: 0 Comm: swapper Not tainted 6.17.0-rc1-00001-g760c6dabf762-dirty #54 PREEMPT
[ 0.000000] Hardware name: linux,dummy-virt (DT)
[ 0.000000] pstate: 800000c5 (Nzcv daIF -PAN -UAO -TCO -DIT -SSBS BTYPE=--)
[ 0.000000] pc : free_area_init+0x50c/0xf9c
[ 0.000000] lr : free_area_init+0x5c0/0xf9c
[ 0.000000] sp : ffffa02ca0f33c00
[ 0.000000] x29: ffffa02ca0f33cb0 x28: 0000000000000000 x27: 0000000000000000
[ 0.000000] x26: 4ec4ec4ec4ec4ec5 x25: 00000000000c0000 x24: 00000000000c0000
[ 0.000000] x23: 0000000000040000 x22: 0000000000000000 x21: ffffa02ca0f3b368
[ 0.000000] x20: ffffa02ca14c7b98 x19: 0000000000000000 x18: 0000000000000002
[ 0.000000] x17: 000000000000cacc x16: 0000000000000001 x15: 0000000000000001
[ 0.000000] x14: 0000000080000000 x13: 0000000000000018 x12: 0000000000000002
[ 0.000000] x11: ffffa02ca0fd4f00 x10: ffffa02ca14bab20 x9 : ffffa02ca14bab38
[ 0.000000] x8 : 00000000000c0000 x7 : 0000000000000001 x6 : 0000000000000002
[ 0.000000] x5 : 0000000140000000 x4 : ffffa02ca0f33c90 x3 : ffffa02ca0f33ca0
[ 0.000000] x2 : ffffa02ca0f33c98 x1 : 0000000080000000 x0 : 0000000000000001
[ 0.000000] Call trace:
[ 0.000000] free_area_init+0x50c/0xf9c (P)
[ 0.000000] bootmem_init+0x110/0x1dc
[ 0.000000] setup_arch+0x278/0x60c
[ 0.000000] start_kernel+0x70/0x748
[ 0.000000] __primary_switched+0x88/0x90
[ 0.000000] Code: d503201f b98093e0 52800016 f8607a93 (f9405260)
[ 0.000000] ---[ end trace 0000000000000000 ]---
[ 0.000000] Kernel panic - not syncing: Attempted to kill the idle task!
[ 0.000000] ---[ end Kernel panic - not syncing: Attempted to kill the idle task! ]---
Link: https://lkml.kernel.org/r/20250819075510.2079961-1-yintirui@huawei.com
Fixes:
|
||
 Linus Torvalds
|
1b237f190e | Linux 6.17-rc3 v6.17-rc3 | ||
|
Linus Torvalds
|
c330cb6077 |
Merge tag 'i2c-for-6.17-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux
Pull i2c fixes from Wolfram Sang:
- hisi: update maintainership
- fix several issues in rtl9300 xfer:
- check message length boundaries
- correct multi-byte value composition on write
- increase polling timeout
- fix block transfer protocol
* tag 'i2c-for-6.17-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux:
i2c: rtl9300: Add missing count byte for SMBus Block Ops
i2c: rtl9300: Increase timeout for transfer polling
i2c: rtl9300: Fix multi-byte I2C write
i2c: rtl9300: Fix out-of-bounds bug in rtl9300_i2c_smbus_xfer
MAINTAINERS: i2c: Update i2c_hisi entry
|
||
|
Linus Torvalds
|
69fd6b99b8 |
Merge tag 'perf_urgent_for_v6.17_rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull perf fix from Borislav Petkov: - Fix a case where the events throttling logic operates on inactive events * tag 'perf_urgent_for_v6.17_rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: perf: Avoid undefined behavior from stopping/starting inactive events |
||
|
Linus Torvalds
|
0f74d9cf52 |
Merge tag 'x86_urgent_for_v6.17_rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 fixes from Borislav Petkov: - Fix the GDS mitigation detection on some machines after the recent attack vectors conversion - Filter out the invalid machine reset reason value -1 when running as a guest as in such cases the reason why the machine was rebooted does not make a whole lot of sense - Init the resource control machinery on Hygon hw in order to avoid a division by zero and to actually enable the feature on hw which supports it * tag 'x86_urgent_for_v6.17_rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86/bugs: Fix GDS mitigation selecting when mitigation is off x86/CPU/AMD: Ignore invalid reset reason value x86/cpu/hygon: Add missing resctrl_cpu_detect() in bsp_init helper |
||
|
Linus Torvalds
|
a69dfb4e0a |
Merge tag 'mips-fixes_6.17_1' of git://git.kernel.org/pub/scm/linux/kernel/git/mips/linux
Pull MIPS fixes from Thomas Bogendoerfer: "Fix ethernet on Lantiq boards" * tag 'mips-fixes_6.17_1' of git://git.kernel.org/pub/scm/linux/kernel/git/mips/linux: mips: lantiq: xway: sysctrl: rename the etop node mips: dts: lantiq: danube: add missing burst length property |
||
|
Linus Torvalds
|
14f84cd318 |
Merge tag 'modules-6.17-rc3.fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/modules/linux
Pull modules fix from Daniel Gomez: "This includes a fix part of the KSPP (Kernel Self Protection Project) to replace the deprecated and unsafe strcpy() calls in the kernel parameter string handler and sysfs parameters for built-in modules. Single commit, no functional changes" * tag 'modules-6.17-rc3.fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/modules/linux: params: Replace deprecated strcpy() with strscpy() and memcpy() |
||
|
Linus Torvalds
|
8d245acc1e |
Merge tag 'char-misc-6.17-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc
Pull char/misc/iio fixes from Greg KH: "Here are a small number of char/misc/iio and other driver fixes for 6.17-rc3. Included in here are: - IIO driver bugfixes for reported issues - bunch of comedi driver fixes - most core bugfix - fpga driver bugfix - cdx driver bugfix All of these have been in linux-next this week with no reported issues" * tag 'char-misc-6.17-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: most: core: Drop device reference after usage in get_channel() comedi: Make insn_rw_emulate_bits() do insn->n samples comedi: Fix use of uninitialized memory in do_insn_ioctl() and do_insnlist_ioctl() comedi: pcl726: Prevent invalid irq number cdx: Fix off-by-one error in cdx_rpmsg_probe() fpga: zynq_fpga: Fix the wrong usage of dma_map_sgtable() iio: pressure: bmp280: Use IS_ERR() in bmp280_common_probe() iio: light: as73211: Ensure buffer holes are zeroed iio: adc: rzg2l_adc: Set driver data before enabling runtime PM iio: adc: rzg2l: Cleanup suspend/resume path iio: adc: ad7380: fix missing max_conversion_rate_hz on adaq4381-4 iio: adc: bd79124: Add GPIOLIB dependency iio: imu: inv_icm42600: change invalid data error to -EBUSY iio: adc: ad7124: fix channel lookup in syscalib functions iio: temperature: maxim_thermocouple: use DMA-safe buffer for spi_read() iio: adc: ad7173: prevent scan if too many setups requested iio: proximity: isl29501: fix buffered read on big-endian systems iio: accel: sca3300: fix uninitialized iio scan data |
||
|
Linus Torvalds
|
8004d08330 |
Merge tag 'usb-6.17-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb
Pull USB fixes from Greg KH: "Here are some small USB driver fixes for 6.17-rc3 to resolve a bunch of reported issues. Included in here are: - typec driver fixes - dwc3 new device id - dwc3 driver fixes - new usb-storage driver quirks - xhci driver fixes - other tiny USB driver fixes to resolve bugs All of these have been in linux-next this week with no reported issues" * tag 'usb-6.17-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: usb: xhci: fix host not responding after suspend and resume usb: xhci: Fix slot_id resource race conflict usb: typec: fusb302: Revert incorrect threaded irq fix USB: core: Update kerneldoc for usb_hcd_giveback_urb() usb: typec: maxim_contaminant: re-enable cc toggle if cc is open and port is clean usb: typec: maxim_contaminant: disable low power mode when reading comparator values usb: dwc3: Remove WARN_ON for device endpoint command timeouts USB: storage: Ignore driver CD mode for Realtek multi-mode Wi-Fi dongles usb: storage: realtek_cr: Use correct byte order for bcs->Residue usb: chipidea: imx: improve usbmisc_imx7d_pullup() kcov, usb: Don't disable interrupts in kcov_remote_start_usb_softirq() usb: dwc3: pci: add support for the Intel Wildcat Lake usb: dwc3: Ignore late xferNotReady event to prevent halt timeout USB: storage: Add unusual-devs entry for Novatek NTK96550-based camera usb: core: hcd: fix accessing unmapped memory in SINGLE_STEP_SET_FEATURE test usb: renesas-xhci: Fix External ROM access timeouts usb: gadget: tegra-xudc: fix PM use count underflow usb: quirks: Add DELAY_INIT quick for another SanDisk 3.2Gen1 Flash Drive |
||
|
Linus Torvalds
|
e1d8f9ccb2 |
Merge tag 'trace-v6.17-rc2-2' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace
Pull tracing fixes from Steven Rostedt:
- Fix rtla and latency tooling pkg-config errors
If libtraceevent and libtracefs is installed, but their corresponding
'.pc' files are not installed, it reports that the libraries are
missing and confuses the developer. Instead, report that the
pkg-config files are missing and should be installed.
- Fix overflow bug of the parser in trace_get_user()
trace_get_user() uses the parsing functions to parse the user space
strings. If the parser fails due to incorrect processing, it doesn't
terminate the buffer with a nul byte. Add a "failed" flag to the
parser that gets set when parsing fails and is used to know if the
buffer is fine to use or not.
- Remove a semicolon that was at an end of a comment line
- Fix register_ftrace_graph() to unregister the pm notifier on error
The register_ftrace_graph() registers a pm notifier but there's an
error path that can exit the function without unregistering it. Since
the function returns an error, it will never be unregistered.
- Allocate and copy ftrace hash for reader of ftrace filter files
When the set_ftrace_filter or set_ftrace_notrace files are open for
read, an iterator is created and sets its hash pointer to the
associated hash that represents filtering or notrace filtering to it.
The issue is that the hash it points to can change while the
iteration is happening. All the locking used to access the tracer's
hashes are released which means those hashes can change or even be
freed. Using the hash pointed to by the iterator can cause UAF bugs
or similar.
Have the read of these files allocate and copy the corresponding
hashes and use that as that will keep them the same while the
iterator is open. This also simplifies the code as opening it for
write already does an allocate and copy, and now that the read is
doing the same, there's no need to check which way it was opened on
the release of the file, and the iterator hash can always be freed.
- Fix function graph to copy args into temp storage
The output of the function graph tracer shows both the entry and the
exit of a function. When the exit is right after the entry, it
combines the two events into one with the output of "function();",
instead of showing:
function() {
}
In order to do this, the iterator descriptor that reads the events
includes storage that saves the entry event while it peaks at the
next event in the ring buffer. The peek can free the entry event so
the iterator must store the information to use it after the peek.
With the addition of function graph tracer recording the args, where
the args are a dynamic array in the entry event, the temp storage
does not save them. This causes the args to be corrupted or even
cause a read of unsafe memory.
Add space to save the args in the temp storage of the iterator.
- Fix race between ftrace_dump and reading trace_pipe
ftrace_dump() is used when a crash occurs where the ftrace buffer
will be printed to the console. But it can also be triggered by
sysrq-z. If a sysrq-z is triggered while a task is reading trace_pipe
it can cause a race in the ftrace_dump() where it checks if the
buffer has content, then it checks if the next event is available,
and then prints the output (regardless if the next event was
available or not). Reading trace_pipe at the same time can cause it
to not be available, and this triggers a WARN_ON in the print. Move
the printing into the check if the next event exists or not
* tag 'trace-v6.17-rc2-2' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace:
ftrace: Also allocate and copy hash for reading of filter files
ftrace: Fix potential warning in trace_printk_seq during ftrace_dump
fgraph: Copy args in intermediate storage with entry
trace/fgraph: Fix the warning caused by missing unregister notifier
ring-buffer: Remove redundant semicolons
tracing: Limit access to parser->buffer when trace_get_user failed
rtla: Check pkg-config install
tools/latency-collector: Check pkg-config install
|
||
|
Linus Torvalds
|
52025b8fc9 |
Merge tag 'driver-core-6.17-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/driver-core/driver-core
Pull driver core fixes from Danilo Krummrich:
- Fix swapped handling of lru_gen and lru_gen_full debugfs files in
vmscan
- Fix debugfs mount options (uid, gid, mode) being silently ignored
- Fix leak of devres action in the unwind path of Devres::new()
- Documentation:
- Expand and fix documentation of (outdated) Device, DeviceContext
and generic driver infrastructure
- Fix C header link of faux device abstractions
- Clarify expected interaction with the security team
- Smooth text flow in the security bug reporting process
documentation
* tag 'driver-core-6.17-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/driver-core/driver-core:
Documentation: smooth the text flow in the security bug reporting process
Documentation: clarify the expected collaboration with security bugs reporters
debugfs: fix mount options not being applied
rust: devres: fix leaking call to devm_add_action()
rust: faux: fix C header link
driver: rust: expand documentation for driver infrastructure
device: rust: expand documentation for Device
device: rust: expand documentation for DeviceContext
mm/vmscan: fix inverted polarity in lru_gen_seq_show()
|
||
 Wolfram Sang
|
3dd2207802 |
Merge tag 'i2c-host-fixes-6.17-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/andi.shyti/linux into i2c/for-current
i2c-host-fixes for v6.17-rc3 - hisi: update maintainership - rtl9300: fix several issues in xfer - check message length boundaries - correct multi-byte value composition on write - increase polling timeout - fix block transfer protocol |
||
 Steven Rostedt
|
bfb336cf97 |
ftrace: Also allocate and copy hash for reading of filter files
Currently the reader of set_ftrace_filter and set_ftrace_notrace just adds
the pointer to the global tracer hash to its iterator. Unlike the writer
that allocates a copy of the hash, the reader keeps the pointer to the
filter hashes. This is problematic because this pointer is static across
function calls that release the locks that can update the global tracer
hashes. This can cause UAF and similar bugs.
Allocate and copy the hash for reading the filter files like it is done
for the writers. This not only fixes UAF bugs, but also makes the code a
bit simpler as it doesn't have to differentiate when to free the
iterator's hash between writers and readers.
Cc: stable@vger.kernel.org
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: Nathan Chancellor <nathan@kernel.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Link: https://lore.kernel.org/20250822183606.12962cc3@batman.local.home
Fixes:
|
||
|
Linus Torvalds
|
6debb69041 |
Merge tag 'drm-fixes-2025-08-23-1' of https://gitlab.freedesktop.org/drm/kernel
Pull drm fixes from Dave Airlie: "Weekly drm fixes. Looks like things did indeed get busier after rc2, nothing seems too major, but stuff scattered all over the place, amdgpu, xe, i915, hibmc, rust support code, and other small fixes. rust: - drm device memory layout and safety fixes tests: - Endianness fixes gpuvm: - docs warning fix panic: - fix division on 32-bit arm i915: - TypeC DP display Fixes - Silence rpm wakeref asserts on GEN11_GU_MISC_IIR access - Relocate compression repacking WA for JSL/EHL xe: - xe_vm_create fixes - fix vm bind ioctl double free amdgpu: - Replay fixes - SMU14 fix - Null check DC fixes - DCE6 DC fixes - Misc DC fixes bridge: - analogix_dp: devm_drm_bridge_alloc() error handling fix habanalabs: - Memory deallocation fix hibmc: - modesetting black screen fixes - fix UAF on irq - fix leak on i2c failure path nouveau: - memory leak fixes - typos rockchip: - Kconfig fix - register caching fix" * tag 'drm-fixes-2025-08-23-1' of https://gitlab.freedesktop.org/drm/kernel: (49 commits) drm/xe: Fix vm_bind_ioctl double free bug drm/xe: Move ASID allocation and user PT BO tracking into xe_vm_create drm/xe: Assign ioctl xe file handler to vm in xe_vm_create drm/i915/gt: Relocate compression repacking WA for JSL/EHL drm/i915: silence rpm wakeref asserts on GEN11_GU_MISC_IIR access drm/amd/display: Fix DP audio DTO1 clock source on DCE 6. drm/amd/display: Fix fractional fb divider in set_pixel_clock_v3 drm/amd/display: Don't print errors for nonexistent connectors drm/amd/display: Don't warn when missing DCE encoder caps drm/amd/display: Fill display clock and vblank time in dce110_fill_display_configs drm/amd/display: Find first CRTC and its line time in dce110_fill_display_configs drm/amd/display: Adjust DCE 8-10 clock, don't overclock by 15% drm/amd/display: Don't overclock DCE 6 by 15% drm/amd/display: Add null pointer check in mod_hdcp_hdcp1_create_session() drm/amd/display: Fix Xorg desktop unresponsive on Replay panel drm/amd/display: Avoid a NULL pointer dereference drm/amdgpu/swm14: Update power limit logic drm/amd/display: Revert Add HPO encoder support to Replay drm/i915/icl+/tc: Convert AUX powered WARN to a debug message drm/i915/lnl+/tc: Use the cached max lane count value ... |
||
 Tengda Wu
|
4013aef2ce |
ftrace: Fix potential warning in trace_printk_seq during ftrace_dump
When calling ftrace_dump_one() concurrently with reading trace_pipe,
a WARN_ON_ONCE() in trace_printk_seq() can be triggered due to a race
condition.
The issue occurs because:
CPU0 (ftrace_dump) CPU1 (reader)
echo z > /proc/sysrq-trigger
!trace_empty(&iter)
trace_iterator_reset(&iter) <- len = size = 0
cat /sys/kernel/tracing/trace_pipe
trace_find_next_entry_inc(&iter)
__find_next_entry
ring_buffer_empty_cpu <- all empty
return NULL
trace_printk_seq(&iter.seq)
WARN_ON_ONCE(s->seq.len >= s->seq.size)
In the context between trace_empty() and trace_find_next_entry_inc()
during ftrace_dump, the ring buffer data was consumed by other readers.
This caused trace_find_next_entry_inc to return NULL, failing to populate
`iter.seq`. At this point, due to the prior trace_iterator_reset, both
`iter.seq.len` and `iter.seq.size` were set to 0. Since they are equal,
the WARN_ON_ONCE condition is triggered.
Move the trace_printk_seq() into the if block that checks to make sure the
return value of trace_find_next_entry_inc() is non-NULL in
ftrace_dump_one(), ensuring the 'iter.seq' is properly populated before
subsequent operations.
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: Ingo Molnar <mingo@elte.hu>
Link: https://lore.kernel.org/20250822033343.3000289-1-wutengda@huaweicloud.com
Fixes:
|
||
|
Steven Rostedt
|
e3d01979e4 |
fgraph: Copy args in intermediate storage with entry
The output of the function graph tracer has two ways to display its
entries. One way for leaf functions with no events recorded within them,
and the other is for functions with events recorded inside it. As function
graph has an entry and exit event, to simplify the output of leaf
functions it combines the two, where as non leaf functions are separate:
2) | invoke_rcu_core() {
2) | raise_softirq() {
2) 0.391 us | __raise_softirq_irqoff();
2) 1.191 us | }
2) 2.086 us | }
The __raise_softirq_irqoff() function above is really two events that were
merged into one. Otherwise it would have looked like:
2) | invoke_rcu_core() {
2) | raise_softirq() {
2) | __raise_softirq_irqoff() {
2) 0.391 us | }
2) 1.191 us | }
2) 2.086 us | }
In order to do this merge, the reading of the trace output file needs to
look at the next event before printing. But since the pointer to the event
is on the ring buffer, it needs to save the entry event before it looks at
the next event as the next event goes out of focus as soon as a new event
is read from the ring buffer. After it reads the next event, it will print
the entry event with either the '{' (non leaf) or ';' and timestamps (leaf).
The iterator used to read the trace file has storage for this event. The
problem happens when the function graph tracer has arguments attached to
the entry event as the entry now has a variable length "args" field. This
field only gets set when funcargs option is used. But the args are not
recorded in this temp data and garbage could be printed. The entry field
is copied via:
data->ent = *curr;
Where "curr" is the entry field. But this method only saves the non
variable length fields from the structure.
Add a helper structure to the iterator data that adds the max args size to
the data storage in the iterator. Then simply copy the entire entry into
this storage (with size protection).
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Link: https://lore.kernel.org/20250820195522.51d4a268@gandalf.local.home
Reported-by: Sasha Levin <sashal@kernel.org>
Tested-by: Sasha Levin <sashal@kernel.org>
Closes: https://lore.kernel.org/all/aJaxRVKverIjF4a6@lappy/
Fixes:
|
||
 Dave Airlie
|
a60f5ee68e |
Merge tag 'drm-xe-fixes-2025-08-21-1' of https://gitlab.freedesktop.org/drm/xe/kernel into drm-fixes
- xe_vm_create fixes (Piotr) - Fix vm_bind_ioctl double free (Christoph) Signed-off-by: Dave Airlie <airlied@redhat.com> From: Rodrigo Vivi <rodrigo.vivi@intel.com> Link: https://lore.kernel.org/r/aKdxiw9hvO6mcyKs@intel.com |
||
|
Linus Torvalds
|
471b25a2fc |
Merge tag 'for-linus-iommufd' of git://git.kernel.org/pub/scm/linux/kernel/git/jgg/iommufd
Pull iommufd fixes from Jason Gunthorpe: "Two very minor fixes: - Fix mismatched kvalloc()/kfree() - Spelling fixes in documentation" * tag 'for-linus-iommufd' of git://git.kernel.org/pub/scm/linux/kernel/git/jgg/iommufd: iommufd: Fix spelling errors in iommufd.rst iommufd: viommu: free memory allocated by kvcalloc() using kvfree() |
||
|
Dave Airlie
|
f9915c391c |
Merge tag 'drm-misc-fixes-2025-08-21' of https://gitlab.freedesktop.org/drm/misc/kernel into drm-fixes
A bunch of fixes for 6.17: - analogix_dp: devm_drm_bridge_alloc() error handling fix - gaudi: Memory deallocation fix - gpuvm: Documentation warning fix - hibmc: Various misc fixes - nouveau: Memory leak fixes, typos - panic: u64 division handling on 32 bits architecture fix - rockchip: Kconfig fix, register caching fix - rust: memory layout and safety fixes - tests: Endianness fixes Signed-off-by: Dave Airlie <airlied@redhat.com> From: Maxime Ripard <mripard@redhat.com> Link: https://lore.kernel.org/r/20250821-economic-dandelion-rooster-c57fa9@houat |
||
 Aleksander Jan Bajkowski
|
8c431ea8f3 |
mips: lantiq: xway: sysctrl: rename the etop node
Bindig requires a node name matching ‘^ethernet@[0-9a-f]+$’. This patch
changes the clock name from “etop” to “ethernet”.
This fixes the following warning:
arch/mips/boot/dts/lantiq/danube_easy50712.dtb: etop@e180000 (lantiq,etop-xway): $nodename:0: 'etop@e180000' does not match '^ethernet@[0-9a-f]+$'
from schema $id: http://devicetree.org/schemas/net/lantiq,etop-xway.yaml#
Fixes:
|
||
|
Aleksander Jan Bajkowski
|
7b28232921 |
mips: dts: lantiq: danube: add missing burst length property
The upstream dts lacks the lantiq,{rx/tx}-burst-length property. Other
issues were also fixed:
arch/mips/boot/dts/lantiq/danube_easy50712.dtb: etop@e180000 (lantiq,etop-xway): 'interrupt-names' is a required property
from schema $id: http://devicetree.org/schemas/net/lantiq,etop-xway.yaml#
arch/mips/boot/dts/lantiq/danube_easy50712.dtb: etop@e180000 (lantiq,etop-xway): 'lantiq,tx-burst-length' is a required property
from schema $id: http://devicetree.org/schemas/net/lantiq,etop-xway.yaml#
arch/mips/boot/dts/lantiq/danube_easy50712.dtb: etop@e180000 (lantiq,etop-xway): 'lantiq,rx-burst-length' is a required property
from schema $id: http://devicetree.org/schemas/net/lantiq,etop-xway.yaml#
Fixes:
|
||
|
Linus Torvalds
|
cf6fc5eefc |
Merge tag 's390-6.17-3' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux
Pull s390 fixes from Alexander Gordeev: - When kernel lockdown is active userspace tools that rely on read operations only are unnecessarily blocked. Fix that by avoiding ioctl registration during lockdown - Invalid NULL pointer accesses succeed due to the lowcore is always mapped the identity mapping pinned to zero. To fix that never map the first two pages of physical memory with identity mapping - Fix invalid SCCB present check in the SCLP interrupt handler - Update defconfigs * tag 's390-6.17-3' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux: s390/hypfs: Enable limited access during lockdown s390/hypfs: Avoid unnecessary ioctl registration in debugfs s390/mm: Do not map lowcore with identity mapping s390/sclp: Fix SCCB present check s390/configs: Set HZ=1000 s390/configs: Update defconfigs |
||
|
Linus Torvalds
|
b3d80535e2 |
Merge tag 'for-linus-6.17-rc3-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip
Pull xen fixes from Juergen Gross:
"Two small cleanups which are both relevant only when running as a Xen
guest"
* tag 'for-linus-6.17-rc3-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip:
drivers/xen/xenbus: remove quirk for Xen 3.x
compiler: remove __ADDRESSABLE_ASM{_STR,}() again
|
||
|
Linus Torvalds
|
272aa18fea |
Merge tag 'platform-drivers-x86-v6.17-2' of git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86
Pull x86 platform driver fixes from Ilpo Järvinen:
- amd/hsmp:
- Ensure sock->metric_tbl_addr is non-NULL
- Register driver even if hwmon registration fails
- amd/pmc: Drop SMU F/W match for Cezanne
- dell-smbios-wmi: Separate "priority" from WMI device ID
- hp-wmi: mark Victus 16-r1xxx for Victus s fan and thermal profile
support
- intel-uncore-freq: Check write blocked for efficiency latency control
* tag 'platform-drivers-x86-v6.17-2' of git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86:
platform/x86: hp-wmi: mark Victus 16-r1xxx for victus_s fan and thermal profile support
platform/x86/amd/hsmp: Ensure success even if hwmon registration fails
platform/x86/amd/hsmp: Ensure sock->metric_tbl_addr is non-NULL
platform/x86/intel-uncore-freq: Check write blocked for ELC
platform/x86/amd: pmc: Drop SMU F/W match for Cezanne
platform/x86: dell-smbios-wmi: Stop touching WMI device ID
|
||
|
Linus Torvalds
|
a2e94e8079 |
Merge tag 'block-6.17-20250822' of git://git.kernel.dk/linux
Pull block fixes from Jens Axboe:
"A set of fixes for block that should go into this tree. A bit larger
than what I usually have at this point in time, a lot of that is the
continued fixing of the lockdep annotation for queue freezing that we
recently added, which has highlighted a number of little issues here
and there. This contains:
- MD pull request via Yu:
- Add a legacy_async_del_gendisk mode, to prevent a user tools
regression. New user tools releases will not use such a mode,
the old release with a new kernel now will have warning about
deprecated behavior, and we prepare to remove this legacy mode
after about a year later
- The rename in kernel causing user tools build failure, revert
the rename in mdp_superblock_s
- Fix a regression that interrupted resync can be shown as
recover from mdstat or sysfs
- Improve file size detection for loop, particularly for networked
file systems, by using getattr to get the size rather than the
cached inode size.
- Hotplug CPU lock vs queue freeze fix
- Lockdep fix while updating the number of hardware queues
- Fix stacking for PI devices
- Silence bio_check_eod() for the known case of device removal where
the size is truncated to 0 sectors"
* tag 'block-6.17-20250822' of git://git.kernel.dk/linux:
block: avoid cpu_hotplug_lock depedency on freeze_lock
block: decrement block_rq_qos static key in rq_qos_del()
block: skip q->rq_qos check in rq_qos_done_bio()
blk-mq: fix lockdep warning in __blk_mq_update_nr_hw_queues
block: tone down bio_check_eod
loop: use vfs_getattr_nosec for accurate file size
loop: Consolidate size calculation logic into lo_calculate_size()
block: remove newlines from the warnings in blk_validate_integrity_limits
block: handle pi_tuple_size in queue_limits_stack_integrity
selftests: ublk: Use ARRAY_SIZE() macro to improve code
md: fix sync_action incorrect display during resync
md: add helper rdev_needs_recovery()
md: keep recovery_cp in mdp_superblock_s
md: add legacy_async_del_gendisk mode
|
||
|
Linus Torvalds
|
d28de4fc0a |
Merge tag 'io_uring-6.17-20250822' of git://git.kernel.dk/linux
Pull io_uring fixes from Jens Axboe: "Just two small fixes - one that fixes inconsistent ->async_data vs REQ_F_ASYNC_DATA handling in futex, and a followup that just ensures that if other opcode handlers mess this up, it won't cause any issues" * tag 'io_uring-6.17-20250822' of git://git.kernel.dk/linux: io_uring: clear ->async_data as part of normal init io_uring/futex: ensure io_futex_wait() cleans up properly on failure |
||
|
Linus Torvalds
|
edeee68c42 |
Merge tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi
Pull SCSI fixes from James Bottomley: "All fixes in drivers. The largest diffstat in ufs is caused by the doc update with the next being the qcom null pointer deref fix" * tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: scsi: ufs: ufs-qcom: Fix ESI null pointer dereference scsi: ufs: core: Rename ufshcd_wait_for_doorbell_clr() scsi: ufs: core: Fix the return value documentation scsi: ufs: core: Remove WARN_ON_ONCE() call from ufshcd_uic_cmd_compl() scsi: ufs: core: Fix IRQ lock inversion for the SCSI host lock scsi: qla4xxx: Prevent a potential error pointer dereference scsi: ufs: ufs-pci: Add support for Intel Wildcat Lake scsi: fnic: Remove a useless struct mempool forward declaration |
||
|
Linus Torvalds
|
afd58777de |
Merge tag 'mmc-v6.17-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc
Pull MMC fixes from Ulf Hansson: "MMC host: - sdhci_am654: Disable HS400 for AM62P SR1.0 and SR1.1 - sdhci-of-arasan: Ensure CD logic stabilization before power-up - sdhci-pci-gli: Mask the replay timer timeout of AER for GL9763e MEMSTICK: - Fix deadlock by moving removing flag earlier" * tag 'mmc-v6.17-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc: mmc: sdhci_am654: Disable HS400 for AM62P SR1.0 and SR1.1 memstick: Fix deadlock by moving removing flag earlier mmc: sdhci-of-arasan: Ensure CD logic stabilization before power-up mmc: sdhci-pci-gli: GL9763e: Mask the replay timer timeout of AER mmc: sdhci-pci-gli: GL9763e: Rename the gli_set_gl9763e() for consistency mmc: sdhci-pci-gli: Add a new function to simplify the code |
||
|
Linus Torvalds
|
e2d324af56 |
Merge tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma
Pull rdma fixes from Jason Gunthorpe: - syzkaller found a WARN_ON in rxe due to poor lifecycle management of resources linked to skbs - Missing error path handling in erdma qp creation - Initialize the qp number for the GSI QP in erdma - Mismatching of DIP, SCC and QP numbers in hns - SRQ bug fixes in bnxt_re - Memory leak and possibly uninited memory in bnxt_re - Remove retired irdma maintainer - Fix kfree() for kvalloc() in ODP - Fix memory leak in hns * tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma: RDMA/hns: Fix dip entries leak on devices newer than hip09 RDMA/core: Free pfn_list with appropriate kvfree call MAINTAINERS: Remove bouncing irdma maintainer RDMA/bnxt_re: Fix to initialize the PBL array RDMA/bnxt_re: Fix a possible memory leak in the driver RDMA/bnxt_re: Fix to remove workload check in SRQ limit path RDMA/bnxt_re: Fix to do SRQ armena by default RDMA/hns: Fix querying wrong SCC context for DIP algorithm RDMA/erdma: Fix unset QPN of GSI QP RDMA/erdma: Fix ignored return value of init_kernel_qp RDMA/rxe: Flush delayed SKBs while releasing RXE resources |
||
|
Linus Torvalds
|
c37d2bc92b |
Merge tag 'iommu-fixes-v6.17-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/iommu/linux
Pull iommu fixes from Joerg Roedel: - AMD-Vi: Fix potential stack buffer overflow via command line - NVidia-Tegra: Fix endianess sparse warning - ARM-SMMU: Fix ATS-masters reference count issue - Virtio-IOMMU: Fix race condition on instance lookup - RISC-V IOMMU: Fix potential NULL-ptr dereference in riscv_iommu_iova_to_phys() * tag 'iommu-fixes-v6.17-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/iommu/linux: iommu/riscv: prevent NULL deref in iova_to_phys iommu/virtio: Make instance lookup robust iommu/arm-smmu-v3: Fix smmu_domain->nr_ats_masters decrement iommu/tegra241-cmdqv: Fix missing cpu_to_le64 at lvcmdq_err_map iommu/amd: Avoid stack buffer overflow from kernel cmdline |
||
|
Linus Torvalds
|
f28ad47b66 |
Merge tag 'sound-6.17-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound
Pull sound fixes from Takashi Iwai: "Only small fixes. - ASoC Cirrus codec fixes - A regression fix for the recent TAS2781 codec refactoring - A fix for user-timer error handling - Fixes for USB-audio descriptor validators - Usual HD-audio and ASoC device-specific quirks" * tag 'sound-6.17-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: ALSA: usb-audio: Use correct sub-type for UAC3 feature unit validation ALSA: timer: fix ida_free call while not allocated ASoC: cs35l56: Remove SoundWire Clock Divider workaround for CS35L63 ASoC: cs35l56: Handle new algorithms IDs for CS35L63 ASoC: cs35l56: Update Firmware Addresses for CS35L63 for production silicon ALSA: hda: tas2781: Fix wrong reference of tasdevice_priv ALSA: hda/realtek: Audio disappears on HP 15-fc000 after warm boot again ALSA: hda/realtek: Fix headset mic on ASUS Zenbook 14 ASoC: codecs: ES9389: Modify the standby configuration ALSA: usb-audio: Fix size validation in convert_chmap_v3() ALSA: hda/tas2781: Add name prefix tas2781 for tas2781's dvc_tlv and amp_vol_tlv ALSA: hda/realtek: Add support for HP EliteBook x360 830 G6 and EliteBook 830 G6 |
||
|
Linus Torvalds
|
3cfcd57def |
Merge tag '6.17-rc2-smb3-client-fix' of git://git.samba.org/sfrench/cifs-2.6
Pull smb client fix from Steve French: "Fix for netfs smb3 oops" * tag '6.17-rc2-smb3-client-fix' of git://git.samba.org/sfrench/cifs-2.6: cifs: Fix oops due to uninitialised variable |
||
|
Linus Torvalds
|
e86ba12cf8 |
Merge tag 'nfs-for-6.17-2' of git://git.linux-nfs.org/projects/trondmy/linux-nfs
Pull NFS client fix from Trond Myklebust: - NFS: Fix a data corrupting race when updating an existing write * tag 'nfs-for-6.17-2' of git://git.linux-nfs.org/projects/trondmy/linux-nfs: NFS: Fix a race when updating an existing write |
||
|
Linus Torvalds
|
6eba757ce9 |
Merge tag 'mm-hotfixes-stable-2025-08-21-18-17' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
Pull misc fixes from Andrew Morton: "20 hotfixes. 10 are cc:stable and the remainder address post-6.16 issues or aren't considered necessary for -stable kernels. 17 of these fixes are for MM. As usual, singletons all over the place, apart from a three-patch series of KHO followup work from Pasha which is actually also a bunch of singletons" * tag 'mm-hotfixes-stable-2025-08-21-18-17' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: mm/mremap: fix WARN with uffd that has remap events disabled mm/damon/sysfs-schemes: put damos dests dir after removing its files mm/migrate: fix NULL movable_ops if CONFIG_ZSMALLOC=m mm/damon/core: fix damos_commit_filter not changing allow mm/memory-failure: fix infinite UCE for VM_PFNMAP pfn MAINTAINERS: mark MGLRU as maintained mm: rust: add page.rs to MEMORY MANAGEMENT - RUST iov_iter: iterate_folioq: fix handling of offset >= folio size selftests/damon: fix selftests by installing drgn related script .mailmap: add entry for Easwar Hariharan selftests/mm: add test for invalid multi VMA operations mm/mremap: catch invalid multi VMA moves earlier mm/mremap: allow multi-VMA move when filesystem uses thp_get_unmapped_area mm/damon/core: fix commit_ops_filters by using correct nth function tools/testing: add linux/args.h header and fix radix, VMA tests mm/debug_vm_pgtable: clear page table entries at destroy_args() squashfs: fix memory leak in squashfs_fill_super kho: warn if KHO is disabled due to an error kho: mm: don't allow deferred struct page with KHO kho: init new_physxa->phys_bits to fix lockdep |
||
 XianLiang Huang
|
99d4d1a070 |
iommu/riscv: prevent NULL deref in iova_to_phys
The riscv_iommu_pte_fetch() function returns either NULL for
unmapped/never-mapped iova, or a valid leaf pte pointer that
requires no further validation.
riscv_iommu_iova_to_phys() failed to handle NULL returns.
Prevent null pointer dereference in
riscv_iommu_iova_to_phys(), and remove the pte validation.
Fixes:
|
||
 Robin Murphy
|
72b6f7cd89 |
iommu/virtio: Make instance lookup robust
Much like arm-smmu in commit |
||
 Nicolin Chen
|
685ca577b4 |
iommu/arm-smmu-v3: Fix smmu_domain->nr_ats_masters decrement
The arm_smmu_attach_commit() updates master->ats_enabled before calling
arm_smmu_remove_master_domain() that is supposed to clean up everything
in the old domain, including the old domain's nr_ats_masters. So, it is
supposed to use the old ats_enabled state of the device, not an updated
state.
This isn't a problem if switching between two domains where:
- old ats_enabled = false; new ats_enabled = false
- old ats_enabled = true; new ats_enabled = true
but can fail cases where:
- old ats_enabled = false; new ats_enabled = true
(old domain should keep the counter but incorrectly decreased it)
- old ats_enabled = true; new ats_enabled = false
(old domain needed to decrease the counter but incorrectly missed it)
Update master->ats_enabled after arm_smmu_remove_master_domain() to fix
this.
Fixes:
|
||
|
Linus Torvalds
|
3957a57201 |
Merge tag 'cgroup-for-6.17-rc2-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/cgroup
Pull cgroup fixes from Tejun Heo: - Fix NULL de-ref in css_rstat_exit() which could happen after allocation failure - Fix a cpuset partition handling bug and a couple other misc issues - Doc spelling fix * tag 'cgroup-for-6.17-rc2-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/cgroup: docs: cgroup: fixed spelling mistakes in documentation cgroup: avoid null de-ref in css_rstat_exit() cgroup/cpuset: Remove the unnecessary css_get/put() in cpuset_partition_write() cgroup/cpuset: Fix a partition error with CPU hotplug cgroup/cpuset: Use static_branch_enable_cpuslocked() on cpusets_insane_config_key |