No user of PHY fixups unregisters these. IOW: The fixup unregistering
functions are unused and can be removed. Remove also documentation
for these functions. Whilst at it, remove also mentioning of
phy_register_fixup() from the Documentation, as this function has been
static since ea47e70e47 ("net: phy: remove fixup-related definitions
from phy.h which are not used outside phylib").
Fixup unregistering functions were added with f38e7a32ee
("phy: add phy fixup unregister functions") in 2016, and last user
was removed with 6782d06a47 ("net: usb: lan78xx: Remove KSZ9031 PHY
fixup") in 2024.
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Link: https://patch.msgid.link/ff8ac321-435c-48d0-b376-fbca80c0c22e@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The ADIN1200/ADIN1300 provide a control bit that selects between normal
receive termination and the lowest common mode impedance for 100BASE-TX
operation. This behavior is controlled through the Low Power Termination
register (B_100_ZPTM_EN_DIMRX).
Bit 0 of this register enables normal termination when set (this is the
default), and selects the lowest common mode impedance when cleared.
Signed-off-by: Osose Itua <osose.itua@savoirfairelinux.com>
Acked-by: Nuno Sá <nuno.sa@analog.com>
Link: https://patch.msgid.link/20260107221913.1334157-3-osose.itua@savoirfairelinux.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Add "adi,low-cmode-impedance" boolean property which, when present,
configures the PHY for the lowest common-mode impedance on the receive
pair for 100BASE-TX operation by clearing the B_100_ZPTM_EN_DIMRX bit.
This is suited for capacitive coupled applications and other
applications where there may be a path for high common-mode noise to
reach the PHY.
If this value is not present, the value of the bit by default is 1,
which is normal termination (zero-power termination) mode.
Signed-off-by: Osose Itua <osose.itua@savoirfairelinux.com>
Acked-by: Rob Herring (Arm) <robh@kernel.org>
Acked-by: Nuno Sá <nuno.sa@analog.com>
Link: https://patch.msgid.link/20260107221913.1334157-2-osose.itua@savoirfairelinux.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Vinod Koul says:
====================
phy common properties
Introduce "rx-polarity" and "tx-polarity" device tree properties
with Kunit tests (from Vladimir Oltean).
* tag 'phy_common_properties' of git://git.kernel.org/pub/scm/linux/kernel/git/phy/linux-phy:
phy: add phy_get_rx_polarity() and phy_get_tx_polarity()
dt-bindings: phy-common-props: RX and TX lane polarity inversion
dt-bindings: phy-common-props: ensure protocol-names are unique
dt-bindings: phy-common-props: create a reusable "protocol-names" definition
dt-bindings: phy: rename transmit-amplitude.yaml to phy-common-props.yaml
====================
Link: https://patch.msgid.link/aWeXvFcGNK5T6As9@vaman
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Document that the 'len' field in ethtool_gstrings and 'n_stats' field in
ethtool_stats optionally serve dual purposes: on entry they specify the
number of items requested, and on return they indicate the number
actually returned (which is not necessarily the same).
Signed-off-by: Gal Pressman <gal@nvidia.com>
Reviewed-by: Dragos Tatulea <dtatulea@nvidia.com>
Link: https://patch.msgid.link/20260115060544.481550-1-gal@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Pull networking fixes from Paolo Abeni:
"Including fixes from bluetooth, can and IPsec.
Current release - regressions:
- net: add net.core.qdisc_max_burst
- can: propagate CAN device capabilities via ml_priv
Previous releases - regressions:
- dst: fix races in rt6_uncached_list_del() and
rt_del_uncached_list()
- ipv6: fix use-after-free in inet6_addr_del().
- xfrm: fix inner mode lookup in tunnel mode GSO segmentation
- ip_tunnel: spread netdev_lockdep_set_classes()
- ip6_tunnel: use skb_vlan_inet_prepare() in __ip6_tnl_rcv()
- bluetooth: hci_sync: enable PA sync lost event
- eth: virtio-net:
- fix the deadlock when disabling rx NAPI
- fix misalignment bug in struct virtnet_info
Previous releases - always broken:
- ipv4: ip_gre: make ipgre_header() robust
- can: fix SSP_SRC in cases when bit-rate is higher than 1 MBit.
- eth:
- mlx5e: profile change fix
- octeon_ep_vf: fix free_irq dev_id mismatch in IRQ rollback
- macvlan: fix possible UAF in macvlan_forward_source()"
* tag 'net-6.19-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (37 commits)
virtio_net: Fix misalignment bug in struct virtnet_info
net: can: j1939: j1939_xtp_rx_rts_session_active(): deactivate session upon receiving the second rts
can: raw: instantly reject disabled CAN frames
can: propagate CAN device capabilities via ml_priv
Revert "can: raw: instantly reject unsupported CAN frames"
net/sched: sch_qfq: do not free existing class in qfq_change_class()
selftests: drv-net: fix RPS mask handling for high CPU numbers
selftests: drv-net: fix RPS mask handling in toeplitz test
ipv6: Fix use-after-free in inet6_addr_del().
dst: fix races in rt6_uncached_list_del() and rt_del_uncached_list()
net: hv_netvsc: reject RSS hash key programming without RX indirection table
tools: ynl: render event op docs correctly
net: add net.core.qdisc_max_burst
net: airoha: Fix typo in airoha_ppe_setup_tc_block_cb definition
net: phy: motorcomm: fix duplex setting error for phy leds
net: octeon_ep_vf: fix free_irq dev_id mismatch in IRQ rollback
net/mlx5e: Restore destroying state bit after profile cleanup
net/mlx5e: Pass netdev to mlx5e_destroy_netdev instead of priv
net/mlx5e: Don't store mlx5e_priv in mlx5e_dev devlink priv
net/mlx5e: Fix crash on profile change rollback failure
...
Marc Kleine-Budde says:
====================
pull-request: can 2026-01-15
this is a pull request of 4 patches for net/main, it super-seeds the
"can 2026-01-14" pull request. The dev refcount leak in patch #3 is
fixed.
The first 3 patches are by Oliver Hartkopp and revert the approach to
instantly reject unsupported CAN frames introduced in
net-next-for-v6.19 and replace it by placing the needed data into the
CAN specific ml_priv.
The last patch is by Tetsuo Handa and fixes a J1939 refcount leak for
j1939_session in session deactivation upon receiving the second RTS.
linux-can-fixes-for-6.19-20260115
* tag 'linux-can-fixes-for-6.19-20260115' of git://git.kernel.org/pub/scm/linux/kernel/git/mkl/linux-can:
net: can: j1939: j1939_xtp_rx_rts_session_active(): deactivate session upon receiving the second rts
can: raw: instantly reject disabled CAN frames
can: propagate CAN device capabilities via ml_priv
Revert "can: raw: instantly reject unsupported CAN frames"
====================
Link: https://patch.msgid.link/20260115090603.1124860-1-mkl@pengutronix.de
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Steffen Klassert says:
====================
pull request (net): ipsec 2026-01-14
1) Fix inner mode lookup in tunnel mode GSO segmentation.
The protocol was taken from the wrong field.
2) Set ipv4 no_pmtu_disc flag only on output SAs. The
insertation of input SAs can fail if no_pmtu_disc
is set.
Please pull or let me know if there are problems.
ipsec-2026-01-14
* tag 'ipsec-2026-01-14' of git://git.kernel.org/pub/scm/linux/kernel/git/klassert/ipsec:
xfrm: set ipv4 no_pmtu_disc flag only on output sa when direction is set
xfrm: Fix inner mode lookup in tunnel mode GSO segmentation
====================
Link: https://patch.msgid.link/20260114121817.1106134-1-steffen.klassert@secunet.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Tariq Toukan says:
====================
net/mlx5: HWS single flow counter support
This small series refactors the flow counter bulk initialization code
and extends it so that single flow counters are also usable by hardware
steering (HWS) rules.
Patches 1-2 refactor the bulk init path: first by factoring out common
flow counter bulk initialization into mlx5_fc_bulk_init(), then by
splitting the bitmap allocation into mlx5_fs_bulk_bitmap_alloc(), with
no functional changes.
Patch 3 initializes bulk data for counters allocated via
mlx5_fc_single_alloc(), so they can be safely used by HWS rules.
====================
Link: https://patch.msgid.link/1768210825-1598472-1-git-send-email-tariqt@nvidia.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Tariq Toukan says:
====================
Introduce and use netif_xmit_timeout_ms() helper
This is V2, find V1 here:
https://lore.kernel.org/all/1764054776-1308696-1-git-send-email-tariqt@nvidia.com/
This series by Shahar introduces a new helper function
netif_xmit_timeout_ms() to check if a TX queue has timed out and report
the timeout duration.
It also encapsulates the check for whether the TX queue is stopped.
Replace duplicated open-coded timeout check in hns3 driver with the new
helper.
For mlx5e, refine the TX timeout recovery flow to act only on SQs whose
transmit timestamp indicates an actual timeout, as determined by the
helper. This prevents unnecessary channel reopen events caused by
attempting recovery on queues that are merely stopped but not truly
timed out.
====================
Link: https://patch.msgid.link/1768209383-1546791-1-git-send-email-tariqt@nvidia.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
mlx5e_tx_timeout_work() is invoked when the dev_watchdog reports a
timed-out TX queue. Currently, the recovery flow is triggered for all
stopped SQs, which is not always correct — some SQs may be temporarily
stopped without actually timing out. Attempting to recover such SQs
results in no EQE being polled (since no real timeout occurred), which
the driver misinterprets as a recovery failure, unnecessarily causing
channel reopening.
Improve the logic to initiate recovery only for SQs that are both
stopped and timed out. Utilize the helper introduced in the previous
patch to determine whether the netdevice watchdog timeout period has
elapsed since the SQ’s last transmit timestamp.
Signed-off-by: Shahar Shitrit <shshitrit@nvidia.com>
Reviewed-by: Yael Chemla <ychemla@nvidia.com>
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Link: https://patch.msgid.link/1768209383-1546791-4-git-send-email-tariqt@nvidia.com
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Use the new TRAILING_OVERLAP() helper to fix a misalignment bug
along with the following warning:
drivers/net/virtio_net.c:429:46: warning: structure containing a flexible array member is not at the end of another structure [-Wflex-array-member-not-at-end]
This helper creates a union between a flexible-array member (FAM)
and a set of members that would otherwise follow it (in this case
`u8 rss_hash_key_data[VIRTIO_NET_RSS_MAX_KEY_SIZE];`). This
overlays the trailing members (rss_hash_key_data) onto the FAM
(hash_key_data) while keeping the FAM and the start of MEMBERS aligned.
The static_assert() ensures this alignment remains.
Notice that due to tail padding in flexible `struct
virtio_net_rss_config_trailer`, `rss_trailer.hash_key_data`
(at offset 83 in struct virtnet_info) and `rss_hash_key_data` (at
offset 84 in struct virtnet_info) are misaligned by one byte. See
below:
struct virtio_net_rss_config_trailer {
__le16 max_tx_vq; /* 0 2 */
__u8 hash_key_length; /* 2 1 */
__u8 hash_key_data[]; /* 3 0 */
/* size: 4, cachelines: 1, members: 3 */
/* padding: 1 */
/* last cacheline: 4 bytes */
};
struct virtnet_info {
...
struct virtio_net_rss_config_trailer rss_trailer; /* 80 4 */
/* XXX last struct has 1 byte of padding */
u8 rss_hash_key_data[40]; /* 84 40 */
...
/* size: 832, cachelines: 13, members: 48 */
/* sum members: 801, holes: 8, sum holes: 31 */
/* paddings: 2, sum paddings: 5 */
};
After changes, those members are correctly aligned at offset 795:
struct virtnet_info {
...
union {
struct virtio_net_rss_config_trailer rss_trailer; /* 792 4 */
struct {
unsigned char __offset_to_hash_key_data[3]; /* 792 3 */
u8 rss_hash_key_data[40]; /* 795 40 */
}; /* 792 43 */
}; /* 792 44 */
...
/* size: 840, cachelines: 14, members: 47 */
/* sum members: 801, holes: 8, sum holes: 35 */
/* padding: 4 */
/* paddings: 1, sum paddings: 4 */
/* last cacheline: 8 bytes */
};
As a result, the RSS key passed to the device is shifted by 1
byte: the last byte is cut off, and instead a (possibly
uninitialized) byte is added at the beginning.
As a last note `struct virtio_net_rss_config_hdr *rss_hdr;` is also
moved to the end, since it seems those three members should stick
around together. :)
Cc: stable@vger.kernel.org
Fixes: ed3100e90d ("virtio_net: Use new RSS config structs")
Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Link: https://patch.msgid.link/aWIItWq5dV9XTTCJ@kspp
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
We (Paolo and I) noticed that in the sending path touching an extra
cacheline due to cq_cached_prod_lock will impact the performance. After
moving the lock from struct xsk_buff_pool to struct xsk_queue, the
performance is increased by ~5% which can be observed by xdpsock.
An alternative approach [1] can be using atomic_try_cmpxchg() to have the
same effect. But unfortunately I don't have evident performance numbers to
prove the atomic approach is better than the current patch. The advantage
is to save the contention time among multiple xsks sharing the same pool
while the disadvantage is losing good maintenance. The full discussion can
be found at the following link.
[1]: https://lore.kernel.org/all/20251128134601.54678-1-kerneljasonxing@gmail.com/
Suggested-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Jason Xing <kernelxing@tencent.com>
Link: https://patch.msgid.link/20260104012125.44003-3-kerneljasonxing@gmail.com
Acked-by: Stanislav Fomichev <sdf@fomichev.me>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
In the shared umem mode with different queues or devices, either
uninitialized cq or fq is not allowed which was previously done in
xp_assign_dev_shared(). The patch advances the check at the beginning
so that 1) we can avoid a few memory allocation and stuff if cq or fq
is NULL, 2) it can be regarded as preparation for the next patch in
the series.
Signed-off-by: Jason Xing <kernelxing@tencent.com>
Link: https://patch.msgid.link/20260104012125.44003-2-kerneljasonxing@gmail.com
Acked-by: Stanislav Fomichev <sdf@fomichev.me>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Oliver Hartkopp <socketcan@hartkopp.net> says:
This series reverts commit 1a620a7238 ("can: raw: instantly reject
unsupported CAN frames").
and its follow-up fixes for the introduced dependency issues.
commit 1a620a7238 ("can: raw: instantly reject unsupported CAN frames")
commit cb2dc6d286 ("can: Kconfig: select CAN driver infrastructure by default")
commit 6abd4577bc ("can: fix build dependency")
commit 5a5aff6338 ("can: fix build dependency")
The reverted patch was accessing CAN device internal data structures
from the network layer because it needs to know about the CAN protocol
capabilities of the CAN devices.
This data access caused build problems between the CAN network and the
CAN driver layer which introduced unwanted Kconfig dependencies and fixes.
The patches 2 & 3 implement a better approach which makes use of the
CAN specific ml_priv data which is accessible from both sides.
With this change the CAN network layer can check the required features
and the decoupling of the driver layer and network layer is restored.
Link: https://patch.msgid.link/20260109144135.8495-1-socketcan@hartkopp.net
[mkl: give series a more descriptive name]
[mkl: properly format reverted patch commitish]
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Commit 1a620a7238 ("can: raw: instantly reject unsupported CAN frames")
caused a sequence of dependency and linker fixes.
Instead of accessing CAN device internal data structures which caused the
dependency problems this patch introduces capability information into the
CAN specific ml_priv data which is accessible from both sides.
With this change the CAN network layer can check the required features and
the decoupling of the driver layer and network layer is restored.
Fixes: 1a620a7238 ("can: raw: instantly reject unsupported CAN frames")
Cc: Marc Kleine-Budde <mkl@pengutronix.de>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Vincent Mailhol <mailhol@kernel.org>
Signed-off-by: Oliver Hartkopp <socketcan@hartkopp.net>
Link: https://patch.msgid.link/20260109144135.8495-3-socketcan@hartkopp.net
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
This reverts commit 1a620a7238
and its follow-up fixes for the introduced dependency issues.
commit 1a620a7238 ("can: raw: instantly reject unsupported CAN frames")
commit cb2dc6d286 ("can: Kconfig: select CAN driver infrastructure by default")
commit 6abd4577bc ("can: fix build dependency")
commit 5a5aff6338 ("can: fix build dependency")
The entire problem was caused by the requirement that a new network layer
feature needed to know about the protocol capabilities of the CAN devices.
Instead of accessing CAN device internal data structures which caused the
dependency problems a better approach has been developed which makes use of
CAN specific ml_priv data which is accessible from both sides.
Cc: Marc Kleine-Budde <mkl@pengutronix.de>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Vincent Mailhol <mailhol@kernel.org>
Signed-off-by: Oliver Hartkopp <socketcan@hartkopp.net>
Link: https://patch.msgid.link/20260109144135.8495-2-socketcan@hartkopp.net
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Pull SCSI fixes from James Bottomley:
"Only one core change (and one in doc only) the rest are drivers.
The one core fix is for some inline encrypting drives that can't
handle encryption requests on non-data commands (like error handling
ones); it saves the request level encryption parameters in the eh_save
structure so they can be cleared for error handling and restored after
it is completed"
* tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi:
scsi: ufs: host: mediatek: Make read-only array scale_us static const
scsi: bfa: Update outdated comment
scsi: mpt3sas: Update maintainer list
scsi: ufs: core: Configure MCQ after link startup
scsi: core: Fix error handler encryption support
scsi: core: Correct documentation for scsi_test_unit_ready()
scsi: ufs: dt-bindings: Fix several grammar errors
Pull bitmap fix from Yury Norov:
"Fix Rust build for architectures implementing their own find_bit() ops
(arm and m68k)"
* tag 'bitmap-for-6.19-rc5' of https://github.com/norov/linux:
rust: bitops: fix missing _find_* functions on 32-bit ARM
Pull media fixes from Mauro Carvalho Chehab:
- ov02c10: some fixes related to preserving bayer pattern and
horizontal control
- ipu-bridge: Add quirks for some Dell XPS laptops with inverted
sensors
- mali-c55: Fix version identifier logic
- rzg2l-cru: csi-2: fix RZ/V2H input sizes on some variants
* tag 'media/v6.19-3' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media:
media: ov02c10: Remove unnecessary hflip and vflip pointers
media: ipu-bridge: Add DMI quirk for Dell XPS laptops with upside down sensors
media: ov02c10: Fix the horizontal flip control
media: ov02c10: Adjust x-win/y-win when changing flipping to preserve bayer-pattern
media: ov02c10: Fix bayer-pattern change after default vflip change
media: rzg2l-cru: csi-2: Support RZ/V2H input sizes
media: uapi: mali-c55-config: Remove version identifier
media: mali-c55: Remove duplicated version check
media: Documentation: mali-c55: Use v4l2-isp version identifier
Add helpers in the generic PHY folder which can be used using 'select
PHY_COMMON_PROPS' from Kconfig, without otherwise needing to
enable GENERIC_PHY.
These helpers need to deal with the slight messiness of the fact that
the polarity properties are arrays per protocol, and with the fact that
there is no default value mandated by the standard properties, all
default values depend on driver and protocol (PHY_POL_NORMAL may be a
good default for SGMII, whereas PHY_POL_AUTO may be a good default for
PCIe).
Push the supported mask of polarities to these helpers, to simplify
drivers such that they don't need to validate what's in the device tree
(or other firmware description).
Add a KUnit test suite to make sure that the API produces the expected
results. The fact that we use fwnode structures means we can validate
with software nodes, and as opposed to the device_property API, we can
bypass the need to have a device structure.
Co-developed-by: Bjørn Mork <bjorn@mork.no>
Signed-off-by: Bjørn Mork <bjorn@mork.no>
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Link: https://patch.msgid.link/20260111093940.975359-6-vladimir.oltean@nxp.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Differential signaling is a technique for high-speed protocols to be
more resilient to noise. At the transmit side we have a positive and a
negative signal which are mirror images of each other. At the receiver,
if we subtract the negative signal (say of amplitude -A) from the
positive signal (say +A), we recover the original single-ended signal at
twice its original amplitude. But any noise, like one coming from EMI
from outside sources, is supposed to have an almost equal impact upon
the positive (A + E, E being for "error") and negative signal (-A + E).
So (A + E) - (-A + E) eliminates this noise, and this is what makes
differential signaling useful.
Except that in order to work, there must be strict requirements observed
during PCB design and layout, like the signal traces needing to have the
same length and be physically close to each other, and many others.
Sometimes it is not easy to fulfill all these requirements, a simple
case to understand is when on chip A's pins, the positive pin is on the
left and the negative is on the right, but on the chip B's pins (with
which A tries to communicate), positive is on the right and negative on
the left. The signals would need to cross, using vias and other ugly
stuff that affects signal integrity (introduces impedance
discontinuities which cause reflections, etc).
So sometimes, board designers intentionally connect differential lanes
the wrong way, and expect somebody else to invert that signal to recover
useful data. This is where RX and TX polarity inversion comes in as a
generic concept that applies to any high-speed serial protocol as long
as it uses differential signaling.
I've stopped two attempts to introduce more vendor-specific descriptions
of this only in the past month:
https://lore.kernel.org/linux-phy/20251110110536.2596490-1-horatiu.vultur@microchip.com/https://lore.kernel.org/netdev/20251028000959.3kiac5kwo5pcl4ft@skbuf/
and in the kernel we already have merged:
- "st,px_rx_pol_inv"
- "st,pcie-tx-pol-inv"
- "st,sata-tx-pol-inv"
- "mediatek,pnswap"
- "airoha,pnswap-rx"
- "airoha,pnswap-tx"
and maybe more. So it is pretty general.
One additional element of complexity is introduced by the fact that for
some protocols, receivers can automatically detect and correct for an
inverted lane polarity (example: the PCIe LTSSM does this in the
Polling.Configuration state; the USB 3.1 Link Layer Test Specification
says that the detection and correction of the lane polarity inversion in
SuperSpeed operation shall be enabled in Polling.RxEQ.). Whereas for
other protocols (SGMII, SATA, 10GBase-R, etc etc), the polarity is all
manual and there is no detection mechanism mandated by their respective
standards.
So why would one even describe rx-polarity and tx-polarity for protocols
like PCIe, if it had to always be PHY_POL_AUTO?
Related question: why would we define the polarity as an array per
protocol? Isn't the physical PCB layout protocol-agnostic, and aren't we
describing the same physical reality from the lens of different protocols?
The answer to both questions is because multi-protocol PHYs exist
(supporting e.g. USB2 and USB3, or SATA and PCIe, or PCIe and Ethernet
over the same lane), one would need to manually set the polarity for
SATA/Ethernet, while leaving it at auto for PCIe/USB 3.0+.
I also investigated from another angle: what if polarity inversion in
the PHY is one layer, and then the PCIe/USB3 LTSSM polarity detection is
another layer on top? Then rx-polarity = <PHY_POL_AUTO> doesn't make
sense, it can still be rx-polarity = <PHY_POL_NORMAL> or <PHY_POL_INVERT>,
and the link training state machine figures things out on top of that.
This would radically simplify the design, as the elimination of
PHY_POL_AUTO inherently means that the need for a property array per
protocol also goes away.
I don't know how things are in the general case, but at least in the 10G
and 28G Lynx SerDes blocks from NXP Layerscape devices, this isn't the
case, and there's only a single level of RX polarity inversion: in the
SerDes lane. In the case of PCIe, the controller is in charge of driving
the RDAT_INV bit autonomously, and it is read-only to software.
So the existence of this kind of SerDes lane proves the need for
PHY_POL_AUTO to be a third state.
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: Rob Herring (Arm) <robh@kernel.org>
Link: https://patch.msgid.link/20260111093940.975359-5-vladimir.oltean@nxp.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Rob Herring points out that "The default for .*-names is the entries
don't have to be unique.":
https://lore.kernel.org/linux-phy/20251204155219.GA1533839-robh@kernel.org/
Let's use uniqueItems: true to make sure the schema enforces this. It
doesn't make sense in this case to have duplicate properties for the
same SerDes protocol.
Note that this can only be done with the $defs + $ref pattern as
established by the previous commit. When the tx-p2p-microvolt-names
constraints were expressed directly under "properties", it would have
been validated by the string-array meta-schema, which does not support
the 'uniqueItems' keyword as can be seen below.
properties:tx-p2p-microvolt-names: Additional properties are not allowed ('uniqueItems' was unexpected)
from schema $id: http://devicetree.org/meta-schemas/string-array.yaml
Suggested-by: Rob Herring <robh@kernel.org>
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: Rob Herring (Arm) <robh@kernel.org>
Link: https://patch.msgid.link/20260111093940.975359-4-vladimir.oltean@nxp.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
I would like to add more properties similar to tx-p2p-microvolt, and I
don't think it makes sense to create one schema for each such property
(transmit-amplitude.yaml, lane-polarity.yaml, transmit-equalization.yaml
etc).
Instead, let's rename to phy-common-props.yaml, which makes it a more
adequate host schema for all the above properties.
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Acked-by: Rob Herring (Arm) <robh@kernel.org>
Link: https://patch.msgid.link/20260111093940.975359-2-vladimir.oltean@nxp.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Pull bpf fixes from Alexei Starovoitov:
- Fix incorrect usage of BPF_TRAMP_F_ORIG_STACK in riscv JIT (Menglong
Dong)
- Fix reference count leak in bpf_prog_test_run_xdp() (Tetsuo Handa)
- Fix metadata size check in bpf_test_run() (Toke Høiland-Jørgensen)
- Check that BPF insn array is not allowed as a map for const strings
(Deepanshu Kartikey)
* tag 'bpf-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf:
bpf: Fix reference count leak in bpf_prog_test_run_xdp()
bpf: Reject BPF_MAP_TYPE_INSN_ARRAY in check_reg_const_str()
selftests/bpf: Update xdp_context_test_run test to check maximum metadata size
bpf, test_run: Subtract size of xdp_frame from allowed metadata size
riscv, bpf: Fix incorrect usage of BPF_TRAMP_F_ORIG_STACK
On 32-bit ARM, you may encounter linker errors such as this one:
ld.lld: error: undefined symbol: _find_next_zero_bit
>>> referenced by rust_binder_main.43196037ba7bcee1-cgu.0
>>> drivers/android/binder/rust_binder_main.o:(<rust_binder_main::process::Process>::insert_or_update_handle) in archive vmlinux.a
>>> referenced by rust_binder_main.43196037ba7bcee1-cgu.0
>>> drivers/android/binder/rust_binder_main.o:(<rust_binder_main::process::Process>::insert_or_update_handle) in archive vmlinux.a
This error occurs because even though the functions are declared by
include/linux/find.h, the definition is #ifdef'd out on 32-bit ARM. This
is because arch/arm/include/asm/bitops.h contains:
#define find_first_zero_bit(p,sz) _find_first_zero_bit_le(p,sz)
#define find_next_zero_bit(p,sz,off) _find_next_zero_bit_le(p,sz,off)
#define find_first_bit(p,sz) _find_first_bit_le(p,sz)
#define find_next_bit(p,sz,off) _find_next_bit_le(p,sz,off)
And the underscore-prefixed function is conditional on #ifndef of the
non-underscore-prefixed name, but the declaration in find.h is *not*
conditional on that #ifndef.
To fix the linker error, we ensure that the symbols in question exist
when compiling Rust code. We do this by defining them in rust/helpers/
whenever the normal definition is #ifndef'd out.
Note that these helpers are somewhat unusual in that they do not have
the rust_helper_ prefix that most helpers have. Adding the rust_helper_
prefix does not compile, as 'bindings::_find_next_zero_bit()' will
result in a call to a symbol called _find_next_zero_bit as defined by
include/linux/find.h rather than a symbol with the rust_helper_ prefix.
This is because when a symbol is present in both include/ and
rust/helpers/, the one from include/ wins under the assumption that the
current configuration is one where that helper is unnecessary. This
heuristic fails for _find_next_zero_bit() because the header file always
declares it even if the symbol does not exist.
The functions still use the __rust_helper annotation. This lets the
wrapper function be inlined into Rust code even if full kernel LTO is
not used once the patch series for that feature lands.
Yury: arches are free to implement they own find_bit() functions. Most
rely on generic implementation, but arm32 and m86k - not; so they require
custom handling. Alice confirmed it fixes the build for both.
Cc: stable@vger.kernel.org
Fixes: 6cf93a9ed3 ("rust: add bindings for bitops.h")
Reported-by: Andreas Hindborg <a.hindborg@kernel.org>
Closes: https://rust-for-linux.zulipchat.com/#narrow/channel/x/topic/x/near/561677301
Tested-by: Andreas Hindborg <a.hindborg@kernel.org>
Reviewed-by: Dirk Behme <dirk.behme@de.bosch.com>
Signed-off-by: Alice Ryhl <aliceryhl@google.com>
Signed-off-by: Yury Norov (NVIDIA) <yury.norov@gmail.com>
The toeplitz.py test passed the hex mask without "0x" prefix (e.g.,
"300" for CPUs 8,9). The toeplitz.c strtoul() call wrongly parsed this
as decimal 300 (0x12c) instead of hex 0x300.
Pass the prefixed mask to toeplitz.c, and the unprefixed one to sysfs.
Fixes: 9cf9aa77a1 ("selftests: drv-net: hw: convert the Toeplitz test to Python")
Reviewed-by: Nimrod Oren <noren@nvidia.com>
Signed-off-by: Gal Pressman <gal@nvidia.com>
Reviewed-by: Willem de Bruijn <willemb@google.com>
Link: https://patch.msgid.link/20260112173715.384843-2-gal@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Eric Dumazet
Heiner Kallweit
Ethan Nelson-Moore
Jakub Kicinski
Lorenzo Bianconi
Osose Itua
Gal Pressman
Linus Torvalds
Paolo Abeni
Moshe Shemesh
Mark Bloch
Shahar Shitrit
Gustavo A. R. Silva
Jason Xing
Tetsuo Handa
Marc Kleine-Budde
Oliver Hartkopp
Vladimir Oltean
Alice Ryhl
Dipayaan Roy
Kuniyuki Iwashima