[ Upstream commit ded74fddca ]
ri_buf just holds a pointer/len pair and is not a log iovec used for
writing to the log. Switch to use a kvec instead.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Carlos Maiolino <cmaiolino@redhat.com>
Signed-off-by: Carlos Maiolino <cem@kernel.org>
Stable-dep-of: 813f8136a2 ("xfs: bounds-check buffer log item's dirty bitmap")
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 653d7ddf6c ]
inet_frag_create() arms the fragment queue timer before inserting the
queue into the fqdir rhashtable. If the namespace fragment timeout is
zero or negative, the timer can run before the queue is published.
The timer callback then marks the queue complete, tries to remove a node
that is not in the hash table yet, and drops the anticipated hash
reference. Creation can subsequently publish the completed queue without
restoring that reference, leaving a stale hash node after the caller drops
the remaining reference.
Publish the queue first and arm the timer while holding the queue lock.
This makes timer expiry wait until the queue is visible in the hash table,
so inet_frag_kill() can remove the node and balance the hash reference.
Fixes: 648700f76b ("inet: frags: use rhashtables for reassembly units")
Cc: stable@vger.kernel.org
Reported-by: Vega <vega@nebusec.ai>
Signed-off-by: Zhiling Zou <zhilinz@nebusec.ai>
Signed-off-by: Ren Wei <enjou1224z@gmail.com>
Link: https://patch.msgid.link/bf66785e7c0c139d7a1900e2f01faeeab344b960.1784948849.git.zhilinz@nebusec.ai
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 246ac114f4 ]
sc16is7xx_handle_tx() currently requests the THRI enable only after it has
filled the TX FIFO. The request is asynchronous because the IER update is
performed later by reg_work.
The SC16IS7xx generates a THRI interrupt when the TX FIFO crosses its
trigger level. If the FIFO drains past that level before reg_work enables
THRI, the chip does not generate a new interrupt. Characters remain queued
indefinitely even though the hardware FIFO is empty.
This was observed on an SC16IS752 while both UART channels were active.
During the stall the software TX buffer remained non-empty while TXLVL
reported 64 bytes free, LSR reported THR and transmitter empty, IER had
THRI enabled, and IIR reported no interrupt pending.
Enable THRI synchronously before filling the FIFO so the threshold crossing
cannot be missed.
Fixes: cc4c1d05eb ("sc16is7xx: Properly resume TX after stop")
Cc: stable <stable@kernel.org>
Signed-off-by: Luca Fresi <luca.fresi@bithiatec.com>
Link: https://patch.msgid.link/20260721222404.204746-1-luca.fresi@bithiatec.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit e3c04834ae ]
When transmit flushing a qcom-geni UART during an ongoing TX DMA, the
UART gets stuck infinitely repeating corrupted TX DMA frames.
The DMA-mode uart_ops does not provide a flush_buffer callback, so an
in-flight transfer can complete after serial core has reset the transmit
kfifo, underflowing its length and resubmitting page-sized transfers
indefinitely. Add one that stops the transfer and clears tx_remaining
and tx_queued.
The stop path was also broken: it unmapped the buffer while the serial
engine could still read it, and never reset the TX DMA state machine.
Cancel the main sequencer command first, then reset the state machine
and wait for it before unmapping. Drop the early return so a pending
mapping is also cleaned up when the main command is inactive.
The bug can be triggered from userspace with a large write immediately
followed by TCOFLUSH. A following tcdrain will hang forever. The bug was
reproduced and this fix was validated on Arduino Uno Q (QRB2210)
using /dev/ttyHS1.
Assisted-by: Claude:claude-5-opus Codex:gpt-5
Signed-off-by: Jan Sebastian Götte <linux@jaseg.de>
Fixes: 2aaa43c707 ("tty: serial: qcom-geni-serial: add support for serial engine DMA")
Cc: stable <stable@kernel.org>
Reviewed-by: Praveen Talari <praveen.talari@oss.qualcomm.com>
Link: https://patch.msgid.link/20260729174105.21838-2-git@jaseg.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Inlined `__qcom_geni_serial_cancel_tx_cmd()` as the existing open-coded cancel/abort block and dropped the `flush_buffer`→`flush_buffer_fifo` rename and `tx_queued` reset, which don't exist in this tree. ]
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 42c5ca1f0a ]
perf_group_detach() handles leader and sibling detach differently. When the
group leader is detached, all siblings are promoted to singleton events and
their group_leader pointer is reset to themselves. When a sibling is
detached, it is removed from the leader's sibling_list, but its
group_leader pointer is left pointing at the old leader.
That is harmless when the sibling is being closed and freed immediately, as
in the DETACH_DEAD path. It is not safe when the sibling is detached but
kept alive, such as during CPU hotplug with DETACH_GROUP. In that case the
sibling is removed from the context, while its file descriptor can still
keep it alive.
A typical failing sequence is:
- A group contains leader L and sibling S.
- CPU hot-unplug detaches S with DETACH_GROUP, removing it from
L->sibling_list but leaving S->group_leader == L.
- L is later closed and freed.
- A PERF_IOC_FLAG_GROUP ioctl on S follows S->group_leader and
dereferences the freed leader.
This was reproduced by running the perf event fuzzer, CPU hotplug, and a
stress workload concurrently:
Unable to handle kernel paging request at virtual address 006b6b6b6b6b6cdb
CPU: 2 PID: 12489 Comm: perf_fuzzer 6.18.7 PREEMPT
pc : perf_ioctl+0x34c/0xc68
x20: ffffff89a3fa2c70 x8 : 6b6b6b6b6b6b6b6b
Code: 943c4a0e 340047a0 f9404a94 f9411e88 (f940b908)
Call trace:
perf_ioctl+0x34c/0xc68 (P)
__arm64_sys_ioctl+0xa0/0xf4
invoke_syscall+0x58/0xe4
el0_svc_common+0xa8/0xdc
do_el0_svc+0x1c/0x28
el0_svc+0x40/0xc0
el0t_64_sync_handler+0x68/0xdc
el0t_64_sync+0x1c4/0x1c8
The fault happened in perf_ioctl(), where perf_event_for_each() follows
the stale group_leader pointer and perf_event_for_each_child() then
dereferences the freed leader's context.
Fix the use-after-free by promoting the detached sibling to a singleton.
Also fix __event_disable() cgroup accounting and event state change.
Fixes: 8a49542c05 ("perf_events: Fix races in group composition")
Assisted-by: PatchWise:gpt-5.5
Signed-off-by: Aditya Chillara <aditya.chillara@oss.qualcomm.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Dapeng Mi <dapeng1.mi@linux.intel.com>
Cc: stable@vger.kernel.org
Link: https://patch.msgid.link/20260807-fix-group-leader-uaf-v3-1-b0c2310c9a0d@oss.qualcomm.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 4409154992 ]
dmaengine_terminate_all() does not wait for a running callback, so the TX
callback can still touch the TX buffer after it is freed. The RX poll
timer reads the RX buffers without the port lock.
Switch to dmaengine_terminate_sync() and delete the RX timer before
freeing the buffers.
Fixes: ead76f329f ("ARM: 6763/1: pl011: add optional RX DMA to PL011 v2")
Cc: stable <stable@kernel.org>
Assisted-by: Codex:gpt-5.6
Signed-off-by: Fan Wu <fanwu01@zju.edu.cn>
Link: https://patch.msgid.link/20260731085915.326775-4-fanwu01@zju.edu.cn
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ changed upstream's `timer_delete_sync()` deletion to match this tree's `del_timer_sync()` spelling at the old call site ]
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit d2121faf13 ]
ntb_netdev_rx_handler() hands the received skb to the network stack
before allocating its replacement. If the allocation fails, nothing is
reposted. Every failure therefore takes one buffer out of the RX queue
while the interface remains up, and enough failures eventually stall
reception.
A retry path could refill the queue later, but ntb_netdev has none.
Allocate the replacement first instead. If that fails, drop the packet
and repost the same skb. This keeps the queue full and lets packet
delivery resume as soon as memory is available again.
Fixes: 548c237c0a ("net: Add support for NTB virtual ethernet device")
Cc: stable@vger.kernel.org
Signed-off-by: Koichiro Den <den@valinux.co.jp>
Reviewed-by: Dave Jiang <dave.jiang@intel.com>
Link: https://patch.msgid.link/20260806032537.3526498-1-den@valinux.co.jp
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
[ kept HEAD's `struct net_device *ndev = qp_data;` declaration instead of the per-queue context variables, adding only `new_skb` to the existing `skb` declaration ]
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 43a556b2fd upstream.
rfcomm_sock_recvmsg() completes a deferred setup by calling
rfcomm_dlc_accept() without holding any RFCOMM lock:
if (test_and_clear_bit(RFCOMM_DEFER_SETUP, &d->flags)) {
rfcomm_dlc_accept(d);
return 0;
}
and rfcomm_dlc_accept() dereferences the session on its first line:
struct sock *sk = d->session->sock->sk;
Every other path that touches d->session runs under rfcomm_mutex:
rfcomm_dlc_open(), rfcomm_dlc_close(), rfcomm_dlc_exists(),
rfcomm_dlc_send_rpn(), and the RFCOMM thread through
rfcomm_process_sessions(). rfcomm_connect_ind() is even documented as
"called under rfcomm_lock()". This call site is the only one that skips
it.
The RFCOMM_DEFER_SETUP bit looks like it serialises the accept against
teardown, since __rfcomm_dlc_close() returns early when it wins the
test_and_clear. But rfcomm_recv_disc() forces the state first:
d->state = BT_CLOSED;
__rfcomm_dlc_close(d, err);
and the early return only covers BT_CONNECT, BT_CONFIG, BT_OPEN and
BT_CONNECT2. With the state already BT_CLOSED that switch does not
match, the bit is never consulted, and __rfcomm_dlc_close() falls
through to rfcomm_dlc_unlink(), which sets d->session = NULL.
So a remote DISC on a deferred dlc clears the session while leaving
RFCOMM_DEFER_SETUP set. The next recvmsg() then passes the
test_and_clear and dereferences a NULL session. No timing window is
needed: once the DISC has been processed, the dereference is
unconditional.
Give rfcomm_dlc_accept() the same shape as rfcomm_dlc_open() and
rfcomm_dlc_close(): an exported wrapper that takes rfcomm_mutex and
re-checks the session, around a __rfcomm_dlc_accept() that the two
in-core callers, which already hold the mutex, keep using.
Reproduced on a KASAN + PROVE_LOCKING kernel with a BR/EDR peer emulated
over /dev/vhci: the peer brings up an ACL link, opens L2CAP on the
RFCOMM PSM, starts a session, opens a dlc on a channel bound with
BT_DEFER_SETUP, and sends DISC after the socket is accepted. recv() on
the accepted socket then hits:
Oops: general protection fault
KASAN: null-ptr-deref in range [0x0000000000000010-0x0000000000000017]
RIP: 0010:rfcomm_dlc_accept+0x54/0x350
Call Trace:
rfcomm_sock_recvmsg+0x1cd/0x230
sock_recvmsg+0x166/0x1c0
__sys_recvfrom+0x20d/0x300
0x10 is the offset of sock in struct rfcomm_session. With this patch the
same run completes with recv() returning 0 and no report, and lockdep
stays quiet, confirming rfcomm_mutex is still taken before lock_sock on
this path as it is on the thread side.
Fixes: bb23c0ab82 ("Bluetooth: Add support for deferring RFCOMM connection setup")
Cc: stable@vger.kernel.org
Signed-off-by: Ali Ahmet Memis <ali@iusegentoo.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 008cb88edb upstream.
On 32-bit systems the config space is too large to ioremap in one go, so
pci_ecam_create() maps each bus segment separately and relies on the
->add_bus callback (pci_ecam_add_bus) to populate the per-bus mapping in
cfg->winp[]. pci_ecam_map_bus() then uses that mapping as the base for
every config access.
The generic ECAM ops (pci_generic_ecam_ops) already provide the ->add_bus
and ->remove_bus callbacks, but the CAM (legacy) ops in pci-host-generic.c
do not. As a result, on a 32-bit host using "pci-host-cam-generic" the
per-bus mapping is never set up and the first config read dereferences a
NULL base, crashing during bus enumeration:
Unable to handle kernel NULL pointer dereference at virtual address 00000800
Oops [#1]
CPU: 0 PID: 1 Comm: swapper Not tainted 6.9.7+ #43
Hardware name: Digilent Nexys-Video-A7 RV32 (DT)
epc : pci_generic_config_read+0x40/0xb0
ra : pci_generic_config_read+0x2c/0xb0
[<c038db9c>] pci_generic_config_read+0x40/0xb0
[<c038da04>] pci_bus_read_config_dword+0x50/0xb0
[<c0391e94>] pci_bus_generic_read_dev_vendor_id+0x3c/0x1ec
[<c039245c>] pci_scan_single_device+0xa4/0x11c
[<c0392570>] pci_scan_slot+0x9c/0x23c
[<c039388c>] pci_scan_child_bus_extend+0x58/0x2f4
[<c0393db0>] pci_scan_root_bus_bridge+0x64/0xe8
[<c0393e54>] pci_host_probe+0x20/0xc8
[<c03bc6f4>] pci_host_common_probe+0x144/0x1e4
Fix this by giving the CAM ops the same ->add_bus/->remove_bus callbacks.
Since pci_ecam_add_bus() and pci_ecam_remove_bus() are static to ecam.c,
move the CAM ops definition there as pci_generic_cam_ops (mirroring
pci_generic_ecam_ops) and export it for pci-host-generic.c to reference.
Fixes: 8fe55ef233 ("PCI: Dynamically map ECAM regions")
Signed-off-by: Steffen Persvold <spersvold@gmail.com>
[mani: removed timestamp from log]
Signed-off-by: Manivannan Sadhasivam <mani@kernel.org>
Cc: stable@vger.kernel.org
Link: https://patch.msgid.link/20260709122446.3151899-1-spersvold@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit f27bdc4307 ]
The ring_buffer_swap_cpu() function currently checks the per-CPU
committing counter to determine if a buffer is actively being written to
before performing the swap. However, there exists a race window where
this check can be bypassed:
ring_buffer_lock_reserve
cpu_buffer = buffer->buffers[cpu]; // cpu_buffer_a
rb_reserve_next_event
rb_start_commit // inc committing
if (unlikely(READ_ONCE(cpu_buffer->buffer) != buffer)) {...}
__rb_reserve_next
rb_move_tail
rb_end_commit(cpu_buffer); // dec committing => 0
/* interrupt hits here, successfully swaps! */
local_inc(&cpu_buffer->committing);
ring_buffer_unlock_commit
cpu_buffer = buffer->buffers[cpu]; // cpu_buffer_b
rb_commit
rb_end_commit
RB_WARN_ON(cpu_buffer, !local_read(&cpu_buffer->committing))
// triggers warning
The committing counter can temporarily drop to 0 during a single write
operation (within rb_move_tail), creating a window where swap can
succeed even though the write is still in progress. This leads to
inconsistent buffer state and triggers the RB_WARN_ON in rb_commit().
Replace the committing counter check with current_context checks, which
are set at the entry of ring_buffer_lock_reserve() and remain valid
throughout the entire write operation, providing a reliable indicator of
buffer busy state during swap.
Cc: stable@vger.kernel.org
Fixes: 4239c38fe0 ("ring-buffer: Process commits whenever moving to a new page.")
Link: https://patch.msgid.link/20260803005640.2445666-2-wutengda@huaweicloud.com
Signed-off-by: Tengda Wu <wutengda@huaweicloud.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit f115d2b70b ]
The function ring_buffer_swap_cpu() has a bunch of jumps to the label out
that simply returns "ret". There's no reason to jump to a label that
simply returns a value. Just return directly from there.
This goes back to almost the beginning when commit 8aabee573d
("ring-buffer: remove unneeded get_online_cpus") was introduced. That
commit removed a put_online_cpus() from that label, but never updated all
the jumps to it that now no longer needed to do anything but return a
value.
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Link: https://lore.kernel.org/20250527145753.6b45d840@gandalf.local.home
Reviewed-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Stable-dep-of: f27bdc4307 ("ring-buffer: Use current_context for safe per-CPU buffer swap")
Signed-off-by: Sasha Levin <sashal@kernel.org>
commit d3ed6dee73 upstream.
After the blamed commits below, some UDP tunnel use dstats for
accounting. On the xmit path, all the UDP-base tunnels ends up
using iptunnel_xmit_stats() for stats accounting, and the latter
assumes the relevant (tunnel) network device uses tstats.
The end result is some 'funny' stat report for the mentioned UDP
tunnel, e.g. when no packet is actually dropped and a bunch of
packets are transmitted:
gnv2: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1450 qdisc noqueue \
state UNKNOWN mode DEFAULT group default qlen 1000
link/ether ee:7d:09:87:90:ea brd ff:ff:ff:ff:ff:ff
RX: bytes packets errors dropped missed mcast
14916 23 0 15 0 0
TX: bytes packets errors dropped carrier collsns
0 1566 0 0 0 0
Address the issue ensuring the same binary layout for the overlapping
fields of dstats and tstats. While this solution is a bit hackish, is
smaller and with no performance pitfall compared to other alternatives
i.e. supporting both dstat and tstat in iptunnel_xmit_stats() or
reverting the blamed commit.
With time we should possibly move all the IP-based tunnel (and virtual
devices) to dstats.
Fixes: c77200c074 ("bareudp: Handle stats using NETDEV_PCPU_STAT_DSTATS.")
Fixes: 6fa6de3022 ("geneve: Handle stats using NETDEV_PCPU_STAT_DSTATS.")
Fixes: be226352e8 ("vxlan: Handle stats using NETDEV_PCPU_STAT_DSTATS.")
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Reviewed-by: Guillaume Nault <gnault@redhat.com>
Link: https://patch.msgid.link/2e1c444cf0f63ae472baff29862c4c869be17031.1738432804.git.pabeni@redhat.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit fa5990ca8f upstream.
For MISC_FMT_OPEN_FILE entries load_misc_binary() clones the
registered interpreter file and denies write access to the clone via
plain deny_write_access(). The clone is installed as
bprm->interpreter and later released by the exec machinery through
exe_file_allow_write_access() which skips the i_writecount increment
for files with FMODE_FSNOTIFY_HSM set.
The deny and allow side can therefore come to different conclusions
when pre-content watches are in play: if a pre-content watch is added
to the interpreter after registration every subsequent exec through
that entry takes a write denial on the clone that is never paired
with a write allowance, driving the interpreter inode's i_writecount
further down with each exec and leaving the interpreter unwritable
even after the entry and all its users are gone.
Take the write denial via exe_file_deny_write_access() so both sides
of the pairing base their decision on the same file mode, and
propagate failure instead of silently ignoring it: an interpreter
that is concurrently open for writing now fails the exec with
ETXTBSY, exactly like an interpreter freshly opened via open_exec()
would.
Link: https://patch.msgid.link/20260710-work-binfmt_misc-locking-v3-2-a162f7cb58d6@kernel.org
Fixes: 0357ef03c9 ("fs: don't block write during exec on pre-content watched files")
Cc: stable@vger.kernel.org
Signed-off-by: Christian Brauner (Amutable) <brauner@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 2195424c3d upstream.
The x25 timers are armed with mod_timer() and cancelled with
timer_delete(), so a pending timer holds no reference on the socket and a
cancel does not wait for a callback already running on another CPU.
x25_heartbeat_expiry() also rearms unconditionally, so it can reinstall
sk->sk_timer after __x25_destroy_socket() has passed its cancel point.
The following __sock_put() frees the socket while the timer is still
queued, and the next expiry uses freed memory. KASAN reports a
slab-use-after-free on the kmalloc-2k object freed by close().
timer_delete_sync() cannot be used here: x25_heartbeat_expiry() and
x25_timer_expiry() both reach the cancels from inside the timer they
would wait on, through __x25_destroy_socket() and x25_disconnect().
Arm the timers with sk_reset_timer() and cancel them with sk_stop_timer()
so that an armed timer owns a reference, and release it in both expiry
handlers. Rearm the heartbeat only while sk_hashed(sk) is still true,
since __x25_destroy_socket() unlinks the socket before dropping it. Arm
the deferred destroy timer the same way and drop its reference in
x25_destroy_timer().
Reproduced on net with KASAN, with the heartbeat period shortened so the
window recurs. With this patch the reproducer no longer triggers a
report and /proc/net/x25 drains.
Discovered by XBOW, triaged by Baul Lee <baul.lee@xbow.com>
Fixes: 1da177e4c3 ("Linux-2.6.12-rc2")
Cc: stable@vger.kernel.org
Signed-off-by: Baul Lee <baul.lee@xbow.com>
Link: https://patch.msgid.link/20260726220342.47245-1-baul.lee@xbow.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
[ adjusted context due to `del_timer()` not yet renamed to `timer_delete()` ]
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 120977e2c0 ]
cls_bpf_prog_from_efd() obtained a SCHED_CLS program via
bpf_prog_get_type_dev() but never verified that a device-bound (offloaded)
program's bound netdev matches the TC netdev the classifier is being
attached to. This let a program loaded with prog_ifindex for device A be
attached via cls_bpf + skip_sw to device B; deleting device A then
destroyed the program's offload state while it was still attached to
device B, triggering a netdevsim WARN (panic with panic_on_warn=1).
Mirror the XDP attach path (net/core/dev.c) and reject the attach with
-EINVAL when a dev-bound program's bound device does not match the
target device.
Fixes: 2b3486bc2d ("bpf: Introduce device-bound XDP programs")
Reported-by: vega@nebusec.ai
Tested-by: Victor Nogueira <victor@mojatatu.com>
Signed-off-by: Jamal Hadi Salim <jhs@mojatatu.com>
Acked-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://patch.msgid.link/20260809094418.901607-1-jhs@mojatatu.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 36a05d2820 ]
On the packet reception path, the ID of the MAC Port on which the packet
was received, is embedded in the RX DMA Descriptor's metadata. The ID is
extracted using the helper function cppi5_desc_get_tags_ids() which fills
in the 16-bit Source Tag into the 'port_id' variable. However, it is only
the lower 8-bits of the 16-bit Source Tag that represent the MAC Port ID,
while the upper 8-bits are Hardware-Reserved and carry an arbitrary value.
With the existing logic, sporadic kernel crash is observed due to the
subsequent driver code accessing out-of-bound memory because of an invalid
port_id.
Hence, fix the port_id extraction logic to use only the lower 8-bits of the
Source Tag as the MAC Port ID.
Fixes: 93a7653031 ("net: ethernet: ti: introduce am65x/j721e gigabit eth subsystem driver")
Signed-off-by: Siddharth Vadapalli <s-vadapalli@ti.com>
Reviewed-by: Chintan Vankar <c-vankar@ti.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20260807111738.2055900-1-s-vadapalli@ti.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 1fd495ef09 ]
This fixes a Kconfig warning
fs/erofs/Kconfig:137:warning: range is invalid
which originates from EROFS_FS_ZIP_LZMA_DEFAULT_MAX_STREAMS using
NR_CPUS which up to now didn't exist for ARCH=m68k. All other
architectures define this symbol, so fix the outlier.
[geert] This also fixes:
- CONFIG_EROFS_FS_ZIP_LZMA_DEFAULT_MAX_STREAMS being set to the
literal NR_CPUS instead of a number by automatic configs like
"make allmodconfig" or "make olddefconfig",
- An infinite loop in manual configs like "make oldconfig" when
CONFIG_EROFS_FS_ZIP_LZMA_DEFAULT_MAX_STREAMS is not present or
has an invalid value in your existing .config.
Fixes: c9b47e6b23 ("erofs: cap LZMA stream pool size")
Signed-off-by: Uwe Kleine-König <ukleinek@kernel.org>
Reviewed-by: Geert Uytterhoeven <geert@linux-m68k.org>
Link: https://patch.msgid.link/20260731094950.1988084-2-ukleinek@kernel.org
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 9e28bf8bdf ]
Coldfire cores configured without a data cache are DMA coherent and
should thus simply use the simple coherent version of dma-direct.
Introduce a new COLDFIRE_COHERENT_DMA Kconfig symbol as a convenient
short hand for such configurations, and a M68K_NONCOHERENT_DMA symbol
for all cases where we need to build non-coherent DMA infrastructure
to simplify the Kconfig and code conditionals.
Not building the non-coherent DMA code slightly reduces the code
size for such configurations.
Numers for m5249evb_defconfig below:
text data bss dec hex filename
2896158 401052 65392 3362602 334f2a vmlinux.before
2895166 400988 65392 3361546 334b0a vmlinux.after
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Greg Ungerer <gerg@linux-m68k.org>
Acked-by: Geert Uytterhoeven <geert@linux-m68k.org>
Tested-by: Greg Ungerer <gerg@linux-m68k.org>
Stable-dep-of: 1fd495ef09 ("m68k: Define NR_CPUS to 1")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 2c8ed1b960 ]
Instead of using arch_dma_alloc if none of the generic coherent
allocators are used, require the architectures to explicitly opt into
providing it. This will used to deal with the case of m68knommu and
coldfire where we can't do any coherent allocations whatsoever, and
also makes it clear that arch_dma_alloc is a last resort.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Robin Murphy <robin.murphy@arm.com>
Reviewed-by: Greg Ungerer <gerg@linux-m68k.org>
Tested-by: Greg Ungerer <gerg@linux-m68k.org>
Stable-dep-of: 1fd495ef09 ("m68k: Define NR_CPUS to 1")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 6d3724e616 ]
u32_walk() enumerates both struct tc_u_hnode and struct tc_u_knode
through the walker callback. u32_bind_class() unconditionally casts the
passed fh to tc_u_knode and accesses &n->res, so when fh is actually a
tc_u_hnode, which has no tcf_result member, this results in a
slab-out-of-bounds read of res->classid in tc_cls_bind_class().
The issue can be reproduced with the following commands:
tc qdisc add dev lo root handle 1: hfsc
tc class add dev lo parent 1: classid 1:1 hfsc sc rate 1000kbit
tc filter add dev lo parent 1:1 protocol ip prio 1 u32 match u32 0 0 flowid 1:1
tc class add dev lo parent 1: classid 1:2 hfsc sc rate 2000kbit
Fix this by skipping hash tables via the TC_U32_KEY(handle) check.
Fixes: 07d79fc7d9 ("net_sched: add reverse binding for tc class")
Signed-off-by: Zhang Changzhong <zhangchangzhong@huawei.com>
Acked-by: Jamal Hadi Salim <jhs@mojatatu.com>
Link: https://patch.msgid.link/1786089038-36366-1-git-send-email-zhangchangzhong@huawei.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit f60b396ee1 ]
tcf_action_exec() handles TC_ACT_GOTO_CHAIN by first checking
rcu_access_pointer(a->goto_chain) and then calling
tcf_action_goto_chain_exec(), which does a second, independent
rcu_dereference_bh(a->goto_chain) read and immediately dereferences
chain->filter_chain. A concurrent tcf_action_set_ctrlact() (e.g. the gact
replace path) can clear a->goto_chain between the two reads, so the second
read returns NULL and tcf_action_goto_chain_exec() dereferences NULL.
Fix the race by doing a single rcu_dereference_bh() read of a->goto_chain
in tcf_action_exec(), checking it once for NULL, and passing the resulting
chain pointer into tcf_action_goto_chain_exec(). This turns the split
check/use into a single check/use on one value.
Fixes: ee3bbfe806 ("net/sched: let actions use RCU to access 'goto_chain'")
Reported-by: vega@nebusec.ai
Tested-by: Victor Nogueira <victor@mojatatu.com>
Signed-off-by: Jamal Hadi Salim <jhs@mojatatu.com>
Reviewed-by: Davide Caratti <dcaratti@redhat.com>
Link: https://patch.msgid.link/20260809090928.868186-1-jhs@mojatatu.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 4cf24dc893 ]
Continue expanding Daniel's patch by adding new skb drop reasons that
are idiosyncratic to TC.
More specifically:
- SKB_DROP_REASON_TC_COOKIE_ERROR: An error occurred whilst
processing a tc ext cookie.
- SKB_DROP_REASON_TC_CHAIN_NOTFOUND: tc chain lookup failed.
- SKB_DROP_REASON_TC_RECLASSIFY_LOOP: tc exceeded max reclassify loop
iterations
Signed-off-by: Victor Nogueira <victor@mojatatu.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Stable-dep-of: f60b396ee1 ("net/sched: act_api: fix TOCTOU NULL deref on a->goto_chain")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit fb2780721c ]
Move drop_reason from struct tcf_result to skb cb - more specifically to
struct tc_skb_cb. With that, we'll be able to also set the drop reason for
the remaining qdiscs (aside from clsact) that do not have access to
tcf_result when time comes to set the skb drop reason.
Signed-off-by: Victor Nogueira <victor@mojatatu.com>
Acked-by: Daniel Borkmann <daniel@iogearbox.net>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Stable-dep-of: f60b396ee1 ("net/sched: act_api: fix TOCTOU NULL deref on a->goto_chain")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 40cb2fdfed ]
Getting the following splat [1] with CONFIG_DEBUG_NET=y and this
reproducer [2]. Problem seems to be that classifiers clear 'struct
tcf_result::drop_reason', thereby triggering the warning in
__kfree_skb_reason() due to reason being 'SKB_NOT_DROPPED_YET' (0).
Fixed by disambiguating a legit error from a verdict with a bogus drop_reason
[1]
WARNING: CPU: 0 PID: 181 at net/core/skbuff.c:1082 kfree_skb_reason+0x38/0x130
Modules linked in:
CPU: 0 PID: 181 Comm: mausezahn Not tainted 6.6.0-rc6-custom-ge43e6d9582e0 #682
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.16.2-1.fc37 04/01/2014
RIP: 0010:kfree_skb_reason+0x38/0x130
[...]
Call Trace:
<IRQ>
__netif_receive_skb_core.constprop.0+0x837/0xdb0
__netif_receive_skb_one_core+0x3c/0x70
process_backlog+0x95/0x130
__napi_poll+0x25/0x1b0
net_rx_action+0x29b/0x310
__do_softirq+0xc0/0x29b
do_softirq+0x43/0x60
</IRQ>
[2]
ip link add name veth0 type veth peer name veth1
ip link set dev veth0 up
ip link set dev veth1 up
tc qdisc add dev veth1 clsact
tc filter add dev veth1 ingress pref 1 proto all flower dst_mac 00:11:22:33:44:55 action drop
mausezahn veth0 -a own -b 00:11:22:33:44:55 -q -c 1
Ido reported:
[...] getting the following splat [1] with CONFIG_DEBUG_NET=y and this
reproducer [2]. Problem seems to be that classifiers clear 'struct
tcf_result::drop_reason', thereby triggering the warning in
__kfree_skb_reason() due to reason being 'SKB_NOT_DROPPED_YET' (0). [...]
[1]
WARNING: CPU: 0 PID: 181 at net/core/skbuff.c:1082 kfree_skb_reason+0x38/0x130
Modules linked in:
CPU: 0 PID: 181 Comm: mausezahn Not tainted 6.6.0-rc6-custom-ge43e6d9582e0 #682
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.16.2-1.fc37 04/01/2014
RIP: 0010:kfree_skb_reason+0x38/0x130
[...]
Call Trace:
<IRQ>
__netif_receive_skb_core.constprop.0+0x837/0xdb0
__netif_receive_skb_one_core+0x3c/0x70
process_backlog+0x95/0x130
__napi_poll+0x25/0x1b0
net_rx_action+0x29b/0x310
__do_softirq+0xc0/0x29b
do_softirq+0x43/0x60
</IRQ>
[2]
#!/bin/bash
ip link add name veth0 type veth peer name veth1
ip link set dev veth0 up
ip link set dev veth1 up
tc qdisc add dev veth1 clsact
tc filter add dev veth1 ingress pref 1 proto all flower dst_mac 00:11:22:33:44:55 action drop
mausezahn veth0 -a own -b 00:11:22:33:44:55 -q -c 1
What happens is that inside most classifiers the tcf_result is copied over
from a filter template e.g. *res = f->res which then implicitly overrides
the prior SKB_DROP_REASON_TC_{INGRESS,EGRESS} default drop code which was
set via sch_handle_{ingress,egress}() for kfree_skb_reason().
Commit text above copied verbatim from Daniel. The general idea of the patch
is not very different from what Ido originally posted but instead done at the
cls_api codepath.
Fixes: 54a59aed39 ("net, sched: Make tc-related drop reason more flexible")
Reported-by: Ido Schimmel <idosch@idosch.org>
Signed-off-by: Jamal Hadi Salim <jhs@mojatatu.com>
Link: https://lore.kernel.org/netdev/ZTjY959R+AFXf3Xy@shredder
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Stable-dep-of: f60b396ee1 ("net/sched: act_api: fix TOCTOU NULL deref on a->goto_chain")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 39d08b9164 ]
Add an initial user for the newly added tcf_set_drop_reason() helper to set the
drop reason for internal errors leading to TC_ACT_SHOT inside {__,}tcf_classify().
Right now this only adds a very basic SKB_DROP_REASON_TC_ERROR as a generic
fallback indicator to mark drop locations. Where needed, such locations can be
converted to more specific codes, for example, when hitting the reclassification
limit, etc.
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Cc: Jamal Hadi Salim <jhs@mojatatu.com>
Cc: Victor Nogueira <victor@mojatatu.com>
Link: https://lore.kernel.org/r/20231009092655.22025-2-daniel@iogearbox.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Stable-dep-of: f60b396ee1 ("net/sched: act_api: fix TOCTOU NULL deref on a->goto_chain")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 54a59aed39 ]
Currently, the kfree_skb_reason() in sch_handle_{ingress,egress}() can only
express a basic SKB_DROP_REASON_TC_INGRESS or SKB_DROP_REASON_TC_EGRESS reason.
Victor kicked-off an initial proposal to make this more flexible by disambiguating
verdict from return code by moving the verdict into struct tcf_result and
letting tcf_classify() return a negative error. If hit, then two new drop
reasons were added in the proposal, that is SKB_DROP_REASON_TC_INGRESS_ERROR
as well as SKB_DROP_REASON_TC_EGRESS_ERROR. Further analysis of the actual
error codes would have required to attach to tcf_classify via kprobe/kretprobe
to more deeply debug skb and the returned error.
In order to make the kfree_skb_reason() in sch_handle_{ingress,egress}() more
extensible, it can be addressed in a more straight forward way, that is: Instead
of placing the verdict into struct tcf_result, we can just put the drop reason
in there, which does not require changes throughout various classful schedulers
given the existing verdict logic can stay as is.
Then, SKB_DROP_REASON_TC_ERROR{,_*} can be added to the enum skb_drop_reason
to disambiguate between an error or an intentional drop. New drop reason error
codes can be added successively to the tc code base.
For internal error locations which have not yet been annotated with a
SKB_DROP_REASON_TC_ERROR{,_*}, the fallback is SKB_DROP_REASON_TC_INGRESS and
SKB_DROP_REASON_TC_EGRESS, respectively. Generic errors could be marked with a
SKB_DROP_REASON_TC_ERROR code until they are converted to more specific ones
if it is found that they would be useful for troubleshooting.
While drop reasons have infrastructure for subsystem specific error codes which
are currently used by mac80211 and ovs, Jakub mentioned that it is preferred
for tc to use the enum skb_drop_reason core codes given it is a better fit and
currently the tooling support is better, too.
With regards to the latter:
[...] I think Alastair (bpftrace) is working on auto-prettifying enums when
bpftrace outputs maps. So we can do something like:
$ bpftrace -e 'tracepoint:skb:kfree_skb { @[args->reason] = count(); }'
Attaching 1 probe...
^C
@[SKB_DROP_REASON_TC_INGRESS]: 2
@[SKB_CONSUMED]: 34
^^^^^^^^^^^^ names!!
Auto-magically. [...]
Add a small helper tcf_set_drop_reason() which can be used to set the drop reason
into the tcf_result.
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Cc: Jamal Hadi Salim <jhs@mojatatu.com>
Cc: Victor Nogueira <victor@mojatatu.com>
Link: https://lore.kernel.org/netdev/20231006063233.74345d36@kernel.org
Reviewed-by: Jakub Kicinski <kuba@kernel.org>
Link: https://lore.kernel.org/r/20231009092655.22025-1-daniel@iogearbox.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Stable-dep-of: f60b396ee1 ("net/sched: act_api: fix TOCTOU NULL deref on a->goto_chain")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 6bcd76c134 ]
syzbot reported a WARNING in __dev_queue_xmit() triggered via tpacket_snd():
skb_assert_len
WARNING: at include/linux/skbuff.h:2753 skb_assert_len
WARNING: at __dev_queue_xmit+0x21bc/0x4970 net/core/dev.c:4781
Call Trace:
<TASK>
dev_queue_xmit include/linux/netdevice.h:3448 [inline]
packet_xmit+0x243/0x310 net/packet/af_packet.c:276
tpacket_snd net/packet/af_packet.c:2907 [inline]
packet_sendmsg+0x28d6/0x4eb0 net/packet/af_packet.c:3134
When sending 0-byte packets via TPACKET ring buffer on devices with no
hard header (e.g. dev->hard_header_len == 0), tpacket_fill_skb()
populates an skb with skb->len == 0 and returns 0. tpacket_snd() then
forwards this empty skb to packet_xmit(), causing __dev_queue_xmit() to
hit skb_assert_len(skb).
Similar checks exist in packet_snd() via commit dc633700f0
("net/af_packet: check len when min_header_len equals to 0") and in
packet_sendmsg_spkt() via commit 6a341729fb ("af_packet: Don't send
zero-byte data in packet_sendmsg_spkt().").
Return -EINVAL in tpacket_fill_skb() when skb->len is zero to reject
zero-length packets in tpacket_snd().
Fixes: 1da177e4c3 ("Linux-2.6.12-rc2")
Reported-by: syzbot+30b93b6845b19cc38581@syzkaller.appspotmail.com
Closes: https://lore.kernel.org/netdev/6a79e807.01d0871a.3a0d52.00ac.GAE@google.com/T/#u
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Willem de Bruijn <willemb@google.com>
Reviewed-by: Jiayuan Chen <jiayuan.chen@linux.dev>
Link: https://patch.msgid.link/20260810150447.1220864-1-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit f12afefb7b ]
The irq handlers take a struct device pointer and call
dev_get_drvdata() to obtain the driver data. However, the driver
data is only set at the end of probe, after devm_request_irq(),
so an interrupt taken in between causes the handlers to pass a
NULL pointer to readl() and crash.
Pass the private data directly as the devm_request_irq() argument
instead of the device pointer, matching what the handlers expect.
Fixes: 6f6c3c36f0 ("ASoC: xlnx: add pcm formatter platform driver")
Assisted-by: opencode:deepseek-v4-flash-free
Signed-off-by: Rosen Penev <rosenp@gmail.com>
Reviewed-by: Michal Simek <michal.simek@amd.com>
Link: https://patch.msgid.link/20260806233231.30631-1-rosenp@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 976df67f46 ]
When an async decrypt fails, tls_decrypt_done() records the error in
ctx->async_wait.err and calls tls_err_abort(), which stores it in
sk_err. tls_sw_recvmsg() and tls_sw_read_sock() each read
async_wait.err once they hold the reader lock and fail the call: a
record that did not authenticate breaks the connection.
tls_sw_splice_read() has no such check, and sk_err does not stand in
for one. tls_rx_rec_wait() tests sk_err only inside the loop it
skips whenever a record is already parsed, and the first reader to
reach sock_error() clears it, while async_wait.err persists. A
splice therefore keeps delivering records on a connection that
recvmsg() and read_sock() refuse to read.
Read async_wait.err in tls_sw_splice_read() as the other two readers
do.
Fixes: f314bfee81 ("tls: rx: return the already-copied data on crypto error")
Reviewed-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Chuck Lever <cel@kernel.org>
Reviewed-by: Sabrina Dubroca <sd@queasysnail.net>
Link: https://patch.msgid.link/20260806-tls-splice-crypto-fix-v1-1-a2624005a286@kernel.org
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 01fdecc048 ]
In packet_parse_headers(), when processing a VLAN-tagged frame,
skb_set_network_header() is called to advance network_header past the
VLAN tag to the inner protocol header. skb_probe_transport_header() is
then called with skb->protocol still set to the outer VLAN EtherType
(e.g. ETH_P_8021Q), while nhoff (derived from skb_network_offset())
already points past the VLAN tag to the inner protocol header.
In __skb_flow_dissect(), proto is initialized to ETH_P_8021Q and nhoff
points past the VLAN tag. When the dissector hits case ETH_P_8021Q, it
reads a struct vlan_hdr at nhoff via __skb_header_pointer(), but that
offset contains the inner protocol header (e.g. an IP header). The bytes
are misinterpreted as a VLAN header, yielding a garbage encapsulated
EtherType that matches no known protocol. The dissector returns false,
so skb_probe_transport_header() never calls skb_set_transport_header(),
leaving transport_header at its uninitialized sentinel value (~0U).
Move skb_probe_transport_header() to before skb_set_network_header(). At
the time skb_probe_transport_header() is called, network_header still
points to the VLAN header, so nhoff correctly points to the VLAN header.
The flow dissector can then parse the VLAN header, extract the inner
EtherType, and advance nhoff to the inner protocol header, allowing
transport_header to be set correctly.
Fixes: dfed913e8b ("net/af_packet: add VLAN support for AF_PACKET SOCK_RAW GSO")
Assisted-by: WChat:claude-opus-4-8
Signed-off-by: Wei Fang <wei.fang@nxp.com>
Reviewed-by: Willem de Bruijn <willemb@google.com>
Link: https://patch.msgid.link/20260807063405.688780-2-wei.fang@oss.nxp.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit cef51860be ]
macvlan devices inherit hard_header_len from lowerdev during macvlan_init(),
but leave needed_headroom and needed_tailroom set to 0.
When the underlying lowerdev requires extra headroom or tailroom for
headers/trailers (e.g. macsec, ipsec, wireguard, tunnels, or veth with rx
headroom), upper layers calculating packet headroom and tailroom fail to
reserve sufficient space.
This can result in reallocation overhead, skb headroom underflows, or KASAN
slab-use-after-free crashes when dev_hard_header() / macvlan_hard_header()
prepends header data or when lower devices append tailroom.
Fix this by:
1. Inheriting needed_headroom and needed_tailroom from lowerdev in macvlan_init().
2. Propagating needed_headroom and needed_tailroom updates to attached macvlans
in macvlan_device_event() when receiving NETDEV_FEAT_CHANGE events.
Fixes: b863ceb7dd ("[NET]: Add macvlan driver")
Reported-by: Tangxin Xie <xietangxin@h-partners.com>
Closes: https://lore.kernel.org/netdev/CANn89i+1EW-sFNK8xoq98gMbPCeLS7e=+rs9gHfLg5Wj+4x0sw@mail.gmail.com/T/#m16adf0ff972cbfd8066c3a8e656e75eaeb12d021
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Hangbin Liu <liuhangbin@kylinos.cn>
Link: https://patch.msgid.link/20260806141938.287660-1-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 490937b88c ]
For bitmap this change makes no difference, because destructors are
called synchronously.
List type however calls them via call_rcu() so accounting decrement can
happen after list_set_flush() set ext_size to 0.
'set->elements = 0' can be removed for the same reason in the list type
case, it calls 'set->elements--' for each element.
Fixes: 9e41f26a50 ("netfilter: ipset: Count non-static extension memory for userspace")
Suggested-by: Jozsef Kadlecsik <kadlec@netfilter.org>
Signed-off-by: Florian Westphal <fw@strlen.de>
Acked-by: Jozsef Kadlecsik <kadlec@netfilter.org>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 2014ac62df ]
nf_flow_table_iterate() only treats original-direction tuple nodes as
owning entries. Publishing the original node first lets GC observe and
free a flow while flow_offload_add() is still inserting the reply node.
Publish the reply node first and the original node last so GC never
sees a partially installed flow.
KASAN can trigger slab-use-after-free read and write reports in the
flowtable/rhashtable path (rht_deferred_worker, jhash, flow_offload_del,
flow_offload_lookup, etc.).
Fixes: ac2a66665e ("netfilter: add generic flow table infrastructure")
Signed-off-by: Jérémy Jean <Jeremy.Jean@oss.cyber.gouv.fr>
Assisted-by: Codex:gpt-5
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit d02f592064 ]
In nft_flow_rule_offload_abort(), WARN_ON_ONCE(err) is triggered on every
error during rollback, including -ENOMEM. Memory allocation failures are
expected under low-memory conditions and do not indicate a kernel bug.
Trace for example:
nft_flow_offload_chain() // FLOW_BLOCK_BIND
nft_flow_block_chain()
nft_chain_offload_cmd()
nft_block_offload_cmd()
->ndo_setup_tc()
nsim_setup_tc()
flow_block_cb_setup_simple()
flow_block_cb_alloc() // fails to -ENOMEM
The warning was reproduced on the 5.10 stable kernel under memory pressure
via fault injection, but the underlying bug exists in mainline as well,
as demonstrated by the ENOMEM trace above. The following splat was
triggered during nf_tables transaction processing:
WARNING: CPU: 0 PID: 8567 at net/netfilter/nf_tables_offload.c:532 nft_flow_rule_offload_abort net/netfilter/nf_tables_offload.c:532 [inline]
WARNING: CPU: 0 PID: 8567 at net/netfilter/nf_tables_offload.c:532 nft_flow_rule_offload_commit+0x971/0xcd0 net/netfilter/nf_tables_offload.c:591
Modules linked in:
CPU: 0 PID: 8567 Comm: syz-executor.0 Not tainted 5.10.260-syzkaller #0
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.12.0-1 04/01/2014
RIP: 0010:nft_flow_rule_offload_abort net/netfilter/nf_tables_offload.c:532 [inline]
RIP: 0010:nft_flow_rule_offload_commit+0x971/0xcd0 net/netfilter/nf_tables_offload.c:591
Call Trace:
nf_tables_commit+0x3bd/0x4bd0 net/netfilter/nf_tables_api.c:8604
nfnetlink_rcv_batch+0xb1e/0x1f20 net/netfilter/nfnetlink.c:509
nfnetlink_rcv_skb_batch net/netfilter/nfnetlink.c:579 [inline]
nfnetlink_rcv+0x3b3/0x420 net/netfilter/nfnetlink.c:597
netlink_unicast_kernel net/netlink/af_netlink.c:1314 [inline]
netlink_unicast+0x6cd/0xa00 net/netfilter/af_netlink.c:1340
netlink_sendmsg+0x906/0xe10 net/netfilter/af_netlink.c:1919
sock_sendmsg_nosec net/socket.c:651 [inline]
__sock_sendmsg+0x155/0x190 net/socket.c:663
____sys_sendmsg+0x705/0x870 net/socket.c:2379
___sys_sendmsg+0x100/0x170 net/socket.c:2433
__sys_sendmsg+0xe9/0x1c0 net/socket.c:2462
do_syscall_64+0x33/0x40 arch/x86/entry/common.c:46
entry_SYSCALL_64_after_hwframe+0x67/0xd1
Change the condition to WARN_ON_ONCE(err && err != -ENOMEM) so that
warnings are only emitted for unexpected errors. This aligns with the
common kernel practice of not warning on -ENOMEM.
Found by Linux Verification Center (linuxtesting.org) with Syzkaller.
Fixes: 63b48c73ff ("netfilter: nf_tables_offload: undo updates if transaction fails")
Signed-off-by: Alexey Velichayshiy <a.velichayshiy@ispras.ru>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 0c88868271 ]
__ip_set_put_byindex() resolved the index to a set pointer under RCU,
then took ip_set_ref_lock in __ip_set_put() to decrement set->ref.
ip_set_swap() holds that same lock while swapping both the ip_set_list
slots and the two sets' ref counters, so it can interleave between the
dereference and the lock acquisition, leaving the caller to decrement a
set whose reference already moved to the other index and hit
BUG_ON(set->ref == 0). list_set_gc() reaches this from timer softirq,
which the nfnl mutex does not serialize against swap: an expiring
list:set member calls list_set_del() -> ip_set_put_byindex() while
IPSET_CMD_SWAP runs on the referenced sets.
Resolve the index and decrement under ip_set_ref_lock, as ip_set_swap()
already does, keeping the refcount tied to the index rather than to a
stale set pointer.
kernel BUG at net/netfilter/ipset/ip_set_core.c:685!
Oops: invalid opcode: 0000 [#1] SMP KASAN NOPTI
RIP: 0010:ip_set_put_byindex (net/netfilter/ipset/ip_set_core.c:870)
Call Trace:
<IRQ>
list_set_del (net/netfilter/ipset/ip_set_list_set.c:159)
set_cleanup_entries (net/netfilter/ipset/ip_set_list_set.c:181)
list_set_gc (net/netfilter/ipset/ip_set_list_set.c:578)
call_timer_fn (kernel/time/timer.c:1748)
__run_timers (kernel/time/timer.c:1799 kernel/time/timer.c:2374)
run_timer_softirq (kernel/time/timer.c:2405)
</IRQ>
Kernel panic - not syncing: Fatal exception in interrupt
Fixes: 9076aea765 ("netfilter: ipset: Increase the number of maximal sets automatically")
Reported-by: AutonomousCodeSecurity@microsoft.com
Signed-off-by: Xiang Mei (Microsoft) <xmei5@asu.edu>
Acked-by: Jozsef Kadlecsik <kadlec@netfilter.org>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Christoph Hellwig
Zhiling Zou
Eric Dumazet
Luca Fresi
Hugo Villeneuve
Lech Perczak
Jan Sebastian Götte
Aditya Chillara
Peter Zijlstra
Fan Wu
Koichiro Den
Griffin Kroah-Hartman
Ali Ahmet Memis
Steffen Persvold
Greg Kroah-Hartman
Tengda Wu
Steven Rostedt
Paolo Abeni
Christian Brauner
Baul Lee
Gao Xiang
Jamal Hadi Salim
Siddharth Vadapalli
Uwe Kleine-König
Zhang Changzhong
Victor Nogueira
Yan Zhai
Daniel Borkmann
Rosen Penev
Chuck Lever
Wei Fang
Florian Westphal
Jérémy Jean
Alexey Velichayshiy
Xiang Mei (Microsoft)