The latest firmware requires the message DMA buffer to
- have a minimum size of 8K
- use a power-of-two size
- be aligned to the buffer size
- not cross 64M boundary
Update the buffer allocation logic to meet these requirements and support
the latest firmware.
Reviewed-by: Mario Limonciello (AMD) <superm1@kernel.org>
Signed-off-by: Lizhi Hou <lizhi.hou@amd.com>
Link: https://patch.msgid.link/20251219014356.2234241-1-lizhi.hou@amd.com
In commit 9ce4aef9a5 ("drm/gpuvm: take GEM lock inside
drm_gpuvm_bo_obtain_prealloc()") we update
drm_gpuvm_bo_obtain_prealloc() to take locks internally, which means
that it's only usable in immediate mode.
In this commit, we notice that drm_gpuvm_bo_obtain() requires you to use
staged mode. This means that we now have one variant of obtain for each
mode you might use gpuvm in.
To reflect this information, we add a warning about using it in
immediate mode, and to make the distinction clearer we rename the method
with a _locked() suffix so that it's clear that it requires the caller
to take the locks.
Reviewed-by: Boris Brezillon <boris.brezillon@collabora.com>
Signed-off-by: Alice Ryhl <aliceryhl@google.com>
Link: https://patch.msgid.link/20260108-gpuvm-rust-v2-2-dbd014005a0b@google.com
[ Slightly reword commit message to refer to commit 9ce4aef9a5
("drm/gpuvm: take GEM lock inside drm_gpuvm_bo_obtain_prealloc()").
- Danilo ]
Signed-off-by: Danilo Krummrich <dakr@kernel.org>
Starting from NPU6, the driver can pass boot parameters address through
the AON retention register and toggle between cold/warm boot types using
the boot_type parameter, while setting the cold boot entry point in both
cases.
Refactor the existing cold/warm boot handling to be consistent with the
new NPU6 boot flow requirements and still maintain compatibility with
older boot flows.
This will allow firmware to remove support for legacy warm boot starting
from NPU6.
Fixes: 550f4dd2ce ("accel/ivpu: Add support for Nova Lake's NPU")
Signed-off-by: Karol Wachowski <karol.wachowski@linux.intel.com>
Reviewed-by: Jeff Hugo <jeff.hugo@oss.qualcomm.com>
Reviewed-by: Andrzej Kacprowski <andrzej.kacprowski@linux.intel.com>
Signed-off-by: Maciej Falkowski <maciej.falkowski@linux.intel.com>
Link: https://patch.msgid.link/20251230142116.540026-1-maciej.falkowski@linux.intel.com
The PPU flop reset is required on some hardware to clear the
temporary registers. This code follows the implementation
of the PPU flop reset as found in the public galcore kernel
module. Compared to that code some superfluous parts were
removed and only the code path for SoC chip_model = 0x8000
and revision = 0x6205 is implemented and tested.
v2: - Move flop reset data to etnaviv_drm_private and initialize it
from etnaviv_gpu_bind (Lucas)
- Prepare code for more chip IDs and other flop reset types
- Do some cleanups and rename some functions
v3: - Move initialization of flop reset data to etnaviv_gpu_init (Lucas)
- Free PPU data suballocation (Lucas)
v4: As suggested by
- replace "asm-generic/int-ll64.h" with "linux/types.h"
- drop flop reset type enum since we only support one type here
- move function return parameters on same line with function name
- replace open coded for loop with memset32
- add cnost to local static values
- add a return value to etnaviv_flop_reset_ppu_init; handle and
pass errors on to the caller
- handle etnaviv_flop_reset_ppu_init return value
- use dev_err for flop reset error message
- fix include guard to be consistent with the other driver code
- fix license header and formatting
v5: As suggested by Christian Gmeiner:
- add required header that is no longer pulled in by etnaviv_buffer.h
- fix include style of linux headers
- free flop_reset_data_ppu when command buffer initialization fails
- fix typo in error message
[cgmeiner: fix SPDX comment style, fix line end with a '(' and fix typo]
Signed-off-by: Gert Wollny <gert.wollny@collabora.com>
Reviewed-by: Christian Gmeiner <cgmeiner@igalia.com>
Tested-by: Marek Vasut <marek.vasut@mailbox.org> # STM32MP255C DHCOS DHSBC
Link: https://patch.msgid.link/20251119164624.9297-5-gert.wollny@collabora.com
Signed-off-by: Christian Gmeiner <cgmeiner@igalia.com>
Commit 5d0bfe4484 ("drm/meson: Add HDMI 1.4 4k modes") added support
for HDMI 1.4 4k modes, which is what TVs need. For computer monitors
the code is using the DMT code-path, which ends up in
meson_venc_hdmi_supported_mode(), which does not allow the 4k modes yet.
The datasheet for all supported SoCs mentions "4Kx2K@60". It's not
clear whether "4K" here means 3840 or 4096 pixels.
Allow resolutions up to 3840x2160 pixels (including middle steps, such
as WQHD at 2560x1440 pixels) so they can be used with computer monitors
(using the DMT code-path in the driver).
Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Acked-by: Neil Armstrong <neil.armstrong@linaro.org>
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://patch.msgid.link/20251108134236.1299630-1-martin.blumenstingl@googlemail.com
The drm_info() function requires the drm/drm_print.h header to be included
first:
In file included from drivers/gpu/drm/pl111/pl111_nomadik.c:7:
drivers/gpu/drm/pl111/pl111_nomadik.h:11:32: error: 'struct drm_device' declared inside parameter list will not be visible outside of this definition or declaration [-Werror]
11 | void pl111_nomadik_init(struct drm_device *dev);
| ^~~~~~~~~~
drivers/gpu/drm/pl111/pl111_nomadik.c: In function 'pl111_nomadik_init':
drivers/gpu/drm/pl111/pl111_nomadik.c:34:9: error: implicit declaration of function 'drm_info'; did you mean 'pr_info'? [-Wimplicit-function-declaration]
34 | drm_info(dev, "set Nomadik PMU mux to CLCD mode\n");
| ^~~~~~~~
| pr_info
Fixes: a1542b8ca6 ("drm: pl111: replace dev_* print functions with drm_* variants")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Eslam Khafagy <eslam.medhat1993@gmail.com>
Signed-off-by: Linus Walleij <linusw@kernel.org>
Link: https://patch.msgid.link/20251223214915.503913-1-arnd@kernel.org
In preparation for using bridge->next_bridge, we need to ensure that it
will never contain anything but NULL or a valid bridge pointer. Current
code stores an ERR_PTR when imx8qxp_pxl2dpi_find_next_bridge() errors
out. Instead of fixing that after the facts in the caller, change the
function to internally set the next_pointer and just return an int error
value.
No functional changes.
Reviewed-by: Maxime Ripard <mripard@kernel.org>
Link: https://patch.msgid.link/20251216-drm-bridge-alloc-getput-drm_of_find_bridge-v3-15-b5165fab8058@bootlin.com
Signed-off-by: Luca Ceresoli <luca.ceresoli@bootlin.com>
Many bridge drivers store a next_bridge pointer in their private data and
use it for attach and sometimes other purposes. This is going to be risky
when bridge hot-unplug is used.
Considering this example scenario:
1. pipeline: encoder --> bridge A --> bridge B --> bridge C
2. encoder takes a reference to bridge B
3. bridge B takes a next_bridge reference to bridge C
4. encoder calls (bridge B)->b_foo(), which in turns references
next_bridge, e.g.:
b_foo() {
bar(b->next_bridge);
}
If bridges B and C are removed, bridge C can be freed but B is still
allocated because the encoder holds a reference to B. So when step 4
happens, 'b->next-bridge' would be a use-after-free.
Calling drm_bridge_put() in the B bridge .remove function does not solve
the problem as it leaves a (potentially long) risk window between B removal
and the final deallocation of B. A safe moment to put the B reference is in
__drm_bridge_free(), when the last reference has been put. This can be done
by drivers in the .destroy func. However to avoid the need for so many
drivers to implement a .destroy func, just offer a next_bridge pointer to
all bridges that is automatically put it in __drm_bridge_free(), exactly
when the .destroy func is called.
Suggested-by: Maxime Ripard <mripard@kernel.org>
Link: https://lore.kernel.org/all/20251201-thick-jasmine-oarfish-1eceb0@houat/
Reviewed-by: Maxime Ripard <mripard@kernel.org>
Link: https://patch.msgid.link/20251216-drm-bridge-alloc-getput-drm_of_find_bridge-v3-6-b5165fab8058@bootlin.com
Signed-off-by: Luca Ceresoli <luca.ceresoli@bootlin.com>
While LT9611UXC is a DSI-to-HDMI bridge, it implements all HDMI-related
functions internally, in the firmware, thus it doesn't make sense to
implement DRM_BRIDGE_OP_HDMI. However it is possible to implement
DRM_BRIDGE_OP_HDMI_AUDIO, streamlining HDMI audio plumbing (which
includes plugged notifications and ELD handling).
Implement corresponding callbacks and trigger EDID read /
drm_connector_hdmi_audio_plugged_notify() from the hpd_notify callback.
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://patch.msgid.link/20250803-lt9611uxc-hdmi-v1-2-cb9ce1793acf@oss.qualcomm.com
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Acquire and release the GEM object's reservation lock around calls
to the object's purge operation. The tests use
drm_gem_shmem_purge_locked(), which led to errors such as show below.
[ 58.709128] WARNING: CPU: 1 PID: 1354 at drivers/gpu/drm/drm_gem_shmem_helper.c:515 drm_gem_shmem_purge_locked+0x51c/0x740
Only export the new helper drm_gem_shmem_purge() for Kunit tests.
This is not an interface for regular drivers.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Fixes: 954907f714 ("drm/shmem-helper: Refactor locked/unlocked functions")
Cc: dri-devel@lists.freedesktop.org
Cc: <stable@vger.kernel.org> # v6.16+
Reviewed-by: Boris Brezillon <boris.brezillon@collabora.com>
Link: https://patch.msgid.link/20251212160317.287409-6-tzimmermann@suse.de
Acquire and release the GEM object's reservation lock around calls
to the object's madvide operation. The tests use
drm_gem_shmem_madvise_locked(), which led to errors such as show below.
[ 58.339389] WARNING: CPU: 1 PID: 1352 at drivers/gpu/drm/drm_gem_shmem_helper.c:499 drm_gem_shmem_madvise_locked+0xde/0x140
Only export the new helper drm_gem_shmem_madvise() for Kunit tests.
This is not an interface for regular drivers.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Fixes: 954907f714 ("drm/shmem-helper: Refactor locked/unlocked functions")
Cc: dri-devel@lists.freedesktop.org
Cc: <stable@vger.kernel.org> # v6.16+
Reviewed-by: Boris Brezillon <boris.brezillon@collabora.com>
Link: https://patch.msgid.link/20251212160317.287409-5-tzimmermann@suse.de
Acquire and release the GEM object's reservation lock around vmap and
vunmap operations. The tests use vmap_locked, which led to errors such
as show below.
[ 122.292030] WARNING: CPU: 3 PID: 1413 at drivers/gpu/drm/drm_gem_shmem_helper.c:390 drm_gem_shmem_vmap_locked+0x3a3/0x6f0
[ 122.468066] WARNING: CPU: 3 PID: 1413 at drivers/gpu/drm/drm_gem_shmem_helper.c:293 drm_gem_shmem_pin_locked+0x1fe/0x350
[ 122.563504] WARNING: CPU: 3 PID: 1413 at drivers/gpu/drm/drm_gem_shmem_helper.c:234 drm_gem_shmem_get_pages_locked+0x23c/0x370
[ 122.662248] WARNING: CPU: 2 PID: 1413 at drivers/gpu/drm/drm_gem_shmem_helper.c:452 drm_gem_shmem_vunmap_locked+0x101/0x330
Only export the new vmap/vunmap helpers for Kunit tests. These are
not interfaces for regular drivers.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Fixes: 954907f714 ("drm/shmem-helper: Refactor locked/unlocked functions")
Cc: dri-devel@lists.freedesktop.org
Cc: <stable@vger.kernel.org> # v6.16+
Reviewed-by: Boris Brezillon <boris.brezillon@collabora.com>
Link: https://patch.msgid.link/20251212160317.287409-4-tzimmermann@suse.de
Daniel Stone
Lizhi Hou
Alice Ryhl
Karol Wachowski
Linus Walleij
Gert Wollny
Hans de Goede
Martin Blumenstingl
Jocelyn Falempe
Arnd Bergmann
Xiaolei Wang
Luca Ceresoli
Andy Yan
Dmitry Baryshkov
Jani Nikula
René Rebe
Thomas Zimmermann