mirror of
https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git
synced 2026-09-22 09:34:56 +02:00
2fd68c7ea2ae741a4446d54c8a461255022e2dc7
1429485
Commits
| Author | SHA1 | Message | Date | |
|---|---|---|---|---|
 Qingfang Deng
|
2fd68c7ea2 |
MAINTAINERS: orphan PPP over Ethernet driver
We haven't seen activities from Michal Ostrowski for quite a long time.
The last commit from him is
|
||
 Linus Torvalds
|
f8f5627a8a |
Merge tag 'net-7.0-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Pull networking fixes from Jakub Kicinski:
"With fixes from wireless, bluetooth and netfilter included we're back
to each PR carrying 30%+ more fixes than in previous era.
The good news is that so far none of the "extra" fixes are themselves
causing real regressions. Not sure how much comfort that is.
Current release - fix to a fix:
- netdevsim: fix build if SKB_EXTENSIONS=n
- eth: stmmac: skip VLAN restore when VLAN hash ops are missing
Previous releases - regressions:
- wifi: iwlwifi: mvm: don't send a 6E related command when
not supported
Previous releases - always broken:
- some info leak fixes
- add missing clearing of skb->cb[] on ICMP paths from tunnels
- ipv6:
- flowlabel: defer exclusive option free until RCU teardown
- avoid overflows in ip6_datagram_send_ctl()
- mpls: add seqcount to protect platform_labels from OOB access
- bridge: improve safety of parsing ND options
- bluetooth: fix leaks, overflows and races in hci_sync
- netfilter: add more input validation, some to address bugs directly
some to prevent exploits from cooking up broken configurations
- wifi:
- ath: avoid poor performance due to stopping the wrong
aggregation session
- virt_wifi: remove SET_NETDEV_DEV to avoid use-after-free
- eth:
- fec: fix the PTP periodic output sysfs interface
- enetc: safely reinitialize TX BD ring when it has unsent frames"
* tag 'net-7.0-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (95 commits)
eth: fbnic: Increase FBNIC_QUEUE_SIZE_MIN to 64
ipv6: avoid overflows in ip6_datagram_send_ctl()
net: hsr: fix VLAN add unwind on slave errors
net: hsr: serialize seq_blocks merge across nodes
vsock: initialize child_ns_mode_locked in vsock_net_init()
selftests/tc-testing: add tests for cls_fw and cls_flow on shared blocks
net/sched: cls_flow: fix NULL pointer dereference on shared blocks
net/sched: cls_fw: fix NULL pointer dereference on shared blocks
net/x25: Fix overflow when accumulating packets
net/x25: Fix potential double free of skb
bnxt_en: Restore default stat ctxs for ULP when resource is available
bnxt_en: Don't assume XDP is never enabled in bnxt_init_dflt_ring_mode()
bnxt_en: Refactor some basic ring setup and adjustment logic
net/mlx5: Fix switchdev mode rollback in case of failure
net/mlx5: Avoid "No data available" when FW version queries fail
net/mlx5: lag: Check for LAG device before creating debugfs
net: macb: properly unregister fixed rate clocks
net: macb: fix clk handling on PCI glue driver removal
virtio_net: clamp rss_max_key_size to NETDEV_RSS_KEY_LEN
net/sched: sch_netem: fix out-of-bounds access in packet corruption
...
|
||
|
Linus Torvalds
|
4c2c526b5a |
Merge tag 'iommu-fixes-v7.0-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/iommu/linux
Pull iommu fixes from Joerg Roedel: - IOMMU-PT related compile breakage in for AMD driver - IOTLB flushing behavior when unmapped region is larger than requested due to page-sizes - Fix IOTLB flush behavior with empty gathers * tag 'iommu-fixes-v7.0-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/iommu/linux: iommupt/amdv1: mark amdv1pt_install_leaf_entry as __always_inline iommupt: Fix short gather if the unmap goes into a large mapping iommu: Do not call drivers for empty gathers |
||
|
Linus Torvalds
|
2ec9074b28 |
Merge tag 'sound-7.0-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound
Pull sound fixes from Takashi Iwai: "People have been so busy for hunting and we're still getting more changes than wished for, but it doesn't look too scary; almost all changes are device-specific small fixes. I guess it's rather a casual bump, and no more Easter eggs are left for 7.0 (hopefully)... - Fixes for the recent regression on ctxfi driver - Fix missing INIT_LIST_HEAD() for ASoC card_aux_list - Usual HD- and USB-audio, and ASoC AMD quirk updates - ASoC fixes for AMD and Intel" * tag 'sound-7.0-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: (24 commits) ASoC: amd: ps: Fix missing leading zeros in subsystem_device SSID log ALSA: usb-audio: Exclude Scarlett 2i2 1st Gen (8016) from SKIP_IFACE_SETUP ALSA: hda/realtek: add quirk for Acer Swift SFG14-73 ALSA: hda/realtek: Add quirk for Lenovo Yoga Pro 7 14IMH9 ASoC: Intel: boards: fix unmet dependency on PINCTRL ASoC: Intel: ehl_rt5660: Use the correct rtd->dev device in hw_params ALSA: ctxfi: Don't enumerate SPDIF1 at DAIO initialization ALSA: hda/realtek: Add quirk for Lenovo Yoga Slim 7 14AKP10 ALSA: hda/realtek: add quirk for HP Laptop 15-fc0xxx ASoC: ep93xx: Fix unchecked clk_prepare_enable() and add rollback on failure ASoC: soc-core: call missing INIT_LIST_HEAD() for card_aux_list ALSA: hda/realtek: Add quirk for Samsung Book2 Pro 360 (NP950QED) ASoC: amd: yc: Add DMI entry for HP Laptop 15-fc0xxx ASoC: amd: yc: Add DMI quirk for ASUS Vivobook Pro 16X OLED M7601RM ALSA: hda/realtek: Add quirk for ASUS ROG Strix SCAR 15 ALSA: usb-audio: Exclude Scarlett Solo 1st Gen from SKIP_IFACE_SETUP ALSA: caiaq: fix stack out-of-bounds read in init_card ALSA: ctxfi: Check the error for index mapping ALSA: ctxfi: Fix missing SPDIFI1 index handling ALSA: hda/realtek: add quirk for HP Victus 15-fb0xxx ... |
||
|
Linus Torvalds
|
2064d7784e |
Merge tag 'auxdisplay-v7.0-1' of git://git.kernel.org/pub/scm/linux/kernel/git/andy/linux-auxdisplay
Pull auxdisplay fixes from Andy Shevchenko: - Fix NULL dereference in linedisp_release() - Fix ht16k33 DT bindings to avoid warnings - Handle errors in I²C transfers in lcd2s driver * tag 'auxdisplay-v7.0-1' of git://git.kernel.org/pub/scm/linux/kernel/git/andy/linux-auxdisplay: auxdisplay: line-display: fix NULL dereference in linedisp_release auxdisplay: lcd2s: add error handling for i2c transfers dt-bindings: auxdisplay: ht16k33: Use unevaluatedProperties to fix common property warning |
||
 Dimitri Daskalakis
|
ec7067e661 |
eth: fbnic: Increase FBNIC_QUEUE_SIZE_MIN to 64
On systems with 64K pages, RX queues will be wedged if users set the
descriptor count to the current minimum (16). Fbnic fragments large
pages into 4K chunks, and scales down the ring size accordingly. With
64K pages and 16 descriptors, the ring size mask is 0 and will never
be filled.
32 descriptors is another special case that wedges the RX rings.
Internally, the rings track pages for the head/tail pointers, not page
fragments. So with 32 descriptors, there's only 1 usable page as one
ring slot is kept empty to disambiguate between an empty/full ring.
As a result, the head pointer never advances and the HW stalls after
consuming 16 page fragments.
Fixes:
|
||
 Eric Dumazet
|
4e45337556 |
ipv6: avoid overflows in ip6_datagram_send_ctl()
Yiming Qian reported :
<quote>
I believe I found a locally triggerable kernel bug in the IPv6 sendmsg
ancillary-data path that can panic the kernel via `skb_under_panic()`
(local DoS).
The core issue is a mismatch between:
- a 16-bit length accumulator (`struct ipv6_txoptions::opt_flen`, type
`__u16`) and
- a pointer to the *last* provided destination-options header (`opt->dst1opt`)
when multiple `IPV6_DSTOPTS` control messages (cmsgs) are provided.
- `include/net/ipv6.h`:
- `struct ipv6_txoptions::opt_flen` is `__u16` (wrap possible).
(lines 291-307, especially 298)
- `net/ipv6/datagram.c:ip6_datagram_send_ctl()`:
- Accepts repeated `IPV6_DSTOPTS` and accumulates into `opt_flen`
without rejecting duplicates. (lines 909-933)
- `net/ipv6/ip6_output.c:__ip6_append_data()`:
- Uses `opt->opt_flen + opt->opt_nflen` to compute header
sizes/headroom decisions. (lines 1448-1466, especially 1463-1465)
- `net/ipv6/ip6_output.c:__ip6_make_skb()`:
- Calls `ipv6_push_frag_opts()` if `opt->opt_flen` is non-zero.
(lines 1930-1934)
- `net/ipv6/exthdrs.c:ipv6_push_frag_opts()` / `ipv6_push_exthdr()`:
- Push size comes from `ipv6_optlen(opt->dst1opt)` (based on the
pointed-to header). (lines 1179-1185 and 1206-1211)
1. `opt_flen` is a 16-bit accumulator:
- `include/net/ipv6.h:298` defines `__u16 opt_flen; /* after fragment hdr */`.
2. `ip6_datagram_send_ctl()` accepts *repeated* `IPV6_DSTOPTS` cmsgs
and increments `opt_flen` each time:
- In `net/ipv6/datagram.c:909-933`, for `IPV6_DSTOPTS`:
- It computes `len = ((hdr->hdrlen + 1) << 3);`
- It checks `CAP_NET_RAW` using `ns_capable(net->user_ns,
CAP_NET_RAW)`. (line 922)
- Then it does:
- `opt->opt_flen += len;` (line 927)
- `opt->dst1opt = hdr;` (line 928)
There is no duplicate rejection here (unlike the legacy
`IPV6_2292DSTOPTS` path which rejects duplicates at
`net/ipv6/datagram.c:901-904`).
If enough large `IPV6_DSTOPTS` cmsgs are provided, `opt_flen` wraps
while `dst1opt` still points to a large (2048-byte)
destination-options header.
In the attached PoC (`poc.c`):
- 32 cmsgs with `hdrlen=255` => `len = (255+1)*8 = 2048`
- 1 cmsg with `hdrlen=0` => `len = 8`
- Total increment: `32*2048 + 8 = 65544`, so `(__u16)opt_flen == 8`
- The last cmsg is 2048 bytes, so `dst1opt` points to a 2048-byte header.
3. The transmit path sizes headers using the wrapped `opt_flen`:
- In `net/ipv6/ip6_output.c:1463-1465`:
- `headersize = sizeof(struct ipv6hdr) + (opt ? opt->opt_flen +
opt->opt_nflen : 0) + ...;`
With wrapped `opt_flen`, `headersize`/headroom decisions underestimate
what will be pushed later.
4. When building the final skb, the actual push length comes from
`dst1opt` and is not limited by wrapped `opt_flen`:
- In `net/ipv6/ip6_output.c:1930-1934`:
- `if (opt->opt_flen) proto = ipv6_push_frag_opts(skb, opt, proto);`
- In `net/ipv6/exthdrs.c:1206-1211`, `ipv6_push_frag_opts()` pushes
`dst1opt` via `ipv6_push_exthdr()`.
- In `net/ipv6/exthdrs.c:1179-1184`, `ipv6_push_exthdr()` does:
- `skb_push(skb, ipv6_optlen(opt));`
- `memcpy(h, opt, ipv6_optlen(opt));`
With insufficient headroom, `skb_push()` underflows and triggers
`skb_under_panic()` -> `BUG()`:
- `net/core/skbuff.c:2669-2675` (`skb_push()` calls `skb_under_panic()`)
- `net/core/skbuff.c:207-214` (`skb_panic()` ends in `BUG()`)
- The `IPV6_DSTOPTS` cmsg path requires `CAP_NET_RAW` in the target
netns user namespace (`ns_capable(net->user_ns, CAP_NET_RAW)`).
- Root (or any task with `CAP_NET_RAW`) can trigger this without user
namespaces.
- An unprivileged `uid=1000` user can trigger this if unprivileged
user namespaces are enabled and it can create a userns+netns to obtain
namespaced `CAP_NET_RAW` (the attached PoC does this).
- Local denial of service: kernel BUG/panic (system crash).
- Reproducible with a small userspace PoC.
</quote>
This patch does not reject duplicated options, as this might break
some user applications.
Instead, it makes sure to adjust opt_flen and opt_nflen to correctly
reflect the size of the current option headers, preventing the overflows
and the potential for panics.
This applies to IPV6_DSTOPTS, IPV6_HOPOPTS, and IPV6_RTHDR.
Specifically:
When a new IPV6_DSTOPTS is processed, the length of the old opt->dst1opt
is subtracted from opt->opt_flen before adding the new length.
When a new IPV6_HOPOPTS is processed, the length of the old opt->dst0opt
is subtracted from opt->opt_nflen.
When a new Routing Header (IPV6_RTHDR or IPV6_2292RTHDR) is processed,
the length of the old opt->srcrt is subtracted from opt->opt_nflen.
In the special case within IPV6_2292RTHDR handling where dst1opt is moved
to dst0opt, the length of the old opt->dst0opt is subtracted from
opt->opt_nflen before the new one is added.
Fixes:
|
||
 Jakub Kicinski
|
be193568be |
Merge branch 'net-hsr-fixes-for-prp-duplication-and-vlan-unwind'
Luka Gejak says: ==================== net: hsr: fixes for PRP duplication and VLAN unwind This series addresses two logic bugs in the HSR/PRP implementation identified during a protocol audit. These are targeted for the 'net' tree as they fix potential memory corruption and state inconsistency. The primary change resolves a race condition in the node merging path by implementing address-based lock ordering. This ensures that concurrent mutations of sequence blocks do not lead to state corruption or deadlocks. An additional fix corrects asymmetric VLAN error unwinding by implementing a centralized unwind path on slave errors. ==================== Link: https://patch.msgid.link/20260401092243.52121-1-luka.gejak@linux.dev Signed-off-by: Jakub Kicinski <kuba@kernel.org> |
||
 Luka Gejak
|
2e3514e63b |
net: hsr: fix VLAN add unwind on slave errors
When vlan_vid_add() fails for a secondary slave, the error path calls
vlan_vid_del() on the failing port instead of the peer slave that had
already succeeded. This results in asymmetric VLAN state across the HSR
pair.
Fix this by switching to a centralized unwind path that removes the VID
from any slave device that was already programmed.
Fixes:
|
||
|
Luka Gejak
|
f5df2990c3 |
net: hsr: serialize seq_blocks merge across nodes
During node merging, hsr_handle_sup_frame() walks node_curr->seq_blocks
to update node_real without holding node_curr->seq_out_lock. This
allows concurrent mutations from duplicate registration paths, risking
inconsistent state or XArray/bitmap corruption.
Fix this by locking both nodes' seq_out_lock during the merge.
To prevent ABBA deadlocks, locks are acquired in order of memory
address.
Reviewed-by: Felix Maurer <fmaurer@redhat.com>
Fixes:
|
||
 Stefano Garzarella
|
b18c833888 |
vsock: initialize child_ns_mode_locked in vsock_net_init()
The `child_ns_mode_locked` field lives in `struct net`, which persists
across vsock module reloads. When the module is unloaded and reloaded,
`vsock_net_init()` resets `mode` and `child_ns_mode` back to their
default values, but does not reset `child_ns_mode_locked`.
The stale lock from the previous module load causes subsequent writes
to `child_ns_mode` to silently fail: `vsock_net_set_child_mode()` sees
the old lock, skips updating the actual value, and returns success
when the requested mode matches the stale lock. The sysctl handler
reports no error, but `child_ns_mode` remains unchanged.
Steps to reproduce:
$ modprobe vsock
$ echo local > /proc/sys/net/vsock/child_ns_mode
$ cat /proc/sys/net/vsock/child_ns_mode
local
$ modprobe -r vsock
$ modprobe vsock
$ echo local > /proc/sys/net/vsock/child_ns_mode
$ cat /proc/sys/net/vsock/child_ns_mode
global <--- expected "local"
Fix this by initializing `child_ns_mode_locked` to 0 (unlocked) in
`vsock_net_init()`, so the write-once mechanism works correctly after
module reload.
Fixes:
|
||
 Xiang Mei
|
70f73562d2 |
selftests/tc-testing: add tests for cls_fw and cls_flow on shared blocks
Regression tests for the shared-block NULL derefs fixed in the previous
two patches:
- fw: attempt to attach an empty fw filter to a shared block and
verify the configuration is rejected with EINVAL.
- flow: create a flow filter on a shared block without a baseclass
and verify the configuration is rejected with EINVAL.
Signed-off-by: Xiang Mei <xmei5@asu.edu>
Acked-by: Jamal Hadi Salim <jhs@mojatatu.com>
Reviewed-by: Victor Nogueira <victor@mojatatu.com>
Link: https://patch.msgid.link/20260331050217.504278-3-xmei5@asu.edu
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
||
|
Xiang Mei
|
1a280dd4bd |
net/sched: cls_flow: fix NULL pointer dereference on shared blocks
flow_change() calls tcf_block_q() and dereferences q->handle to derive
a default baseclass. Shared blocks leave block->q NULL, causing a NULL
deref when a flow filter without a fully qualified baseclass is created
on a shared block.
Check tcf_block_shared() before accessing block->q and return -EINVAL
for shared blocks. This avoids the null-deref shown below:
=======================================================================
KASAN: null-ptr-deref in range [0x0000000000000038-0x000000000000003f]
RIP: 0010:flow_change (net/sched/cls_flow.c:508)
Call Trace:
tc_new_tfilter (net/sched/cls_api.c:2432)
rtnetlink_rcv_msg (net/core/rtnetlink.c:6980)
[...]
=======================================================================
Fixes:
|
||
|
Xiang Mei
|
faeea8bbf6 |
net/sched: cls_fw: fix NULL pointer dereference on shared blocks
The old-method path in fw_classify() calls tcf_block_q() and
dereferences q->handle. Shared blocks leave block->q NULL, causing a
NULL deref when an empty cls_fw filter is attached to a shared block
and a packet with a nonzero major skb mark is classified.
Reject the configuration in fw_change() when the old method (no
TCA_OPTIONS) is used on a shared block, since fw_classify()'s
old-method path needs block->q which is NULL for shared blocks.
The fixed null-ptr-deref calling stack:
KASAN: null-ptr-deref in range [0x0000000000000038-0x000000000000003f]
RIP: 0010:fw_classify (net/sched/cls_fw.c:81)
Call Trace:
tcf_classify (./include/net/tc_wrapper.h:197 net/sched/cls_api.c:1764 net/sched/cls_api.c:1860)
tc_run (net/core/dev.c:4401)
__dev_queue_xmit (net/core/dev.c:4535 net/core/dev.c:4790)
Fixes:
|
||
 Paolo Abeni
|
a80a014f83 |
Merge branch 'net-x25-fix-overflow-and-double-free'
Martin Schiller says: ==================== net/x25: Fix overflow and double free This patch set includes 2 fixes: The first removes a potential double free of received skb The second fixes an overflow when accumulating packets with the more-bit set. Signed-off-by: Martin Schiller <ms@dev.tdt.de> ==================== Link: https://patch.msgid.link/20260331-x25_fraglen-v4-0-3e69f18464b4@dev.tdt.de Signed-off-by: Paolo Abeni <pabeni@redhat.com> |
||
 Martin Schiller
|
a1822cb524 |
net/x25: Fix overflow when accumulating packets
Add a check to ensure that `x25_sock.fraglen` does not overflow.
The `fraglen` also needs to be resetted when purging `fragment_queue` in
`x25_clear_queues()`.
Fixes:
|
||
|
Martin Schiller
|
d10a26aa4d |
net/x25: Fix potential double free of skb
When alloc_skb fails in x25_queue_rx_frame it calls kfree_skb(skb) at
line 48 and returns 1 (error).
This error propagates back through the call chain:
x25_queue_rx_frame returns 1
|
v
x25_state3_machine receives the return value 1 and takes the else
branch at line 278, setting queued=0 and returning 0
|
v
x25_process_rx_frame returns queued=0
|
v
x25_backlog_rcv at line 452 sees queued=0 and calls kfree_skb(skb)
again
This would free the same skb twice. Looking at x25_backlog_rcv:
net/x25/x25_in.c:x25_backlog_rcv() {
...
queued = x25_process_rx_frame(sk, skb);
...
if (!queued)
kfree_skb(skb);
}
Fixes:
|
||
 Takashi Iwai
|
b477ab8893 |
Merge tag 'asoc-fix-v7.0-rc6' of https://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into for-linus
ASoC: Fixes for v7.0 Another smallish batch of fixes and quirks, these days it's AMD that is getting all the DMI entries added. We've got one core fix for a missing list initialisation with auxiliary devices, otherwise it's all fairly small things. |
||
|
Jakub Kicinski
|
9351edf65c |
Merge branch 'bnxt_en-bug-fixes'
Michael Chan says: ==================== bnxt_en: Bug fixes The first patch is a refactor patch needed by the second patch to fix XDP ring initialization during FW reset. The third patch fixes an issue related to stats context reservation for RoCE. ==================== Link: https://patch.msgid.link/20260331065138.948205-1-michael.chan@broadcom.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> |
||
 Pavan Chebbi
|
071dbfa304 |
bnxt_en: Restore default stat ctxs for ULP when resource is available
During resource reservation, if the L2 driver does not have enough
MSIX vectors to provide to the RoCE driver, it sets the stat ctxs for
ULP also to 0 so that we don't have to reserve it unnecessarily.
However, subsequently the user may reduce L2 rings thereby freeing up
some resources that the L2 driver can now earmark for RoCE. In this
case, the driver should restore the default ULP stat ctxs to make
sure that all RoCE resources are ready for use.
The RoCE driver may fail to initialize in this scenario without this
fix.
Fixes:
|
||
 Michael Chan
|
e4bf81dcad |
bnxt_en: Don't assume XDP is never enabled in bnxt_init_dflt_ring_mode()
The original code made the assumption that when we set up the initial default ring mode, we must be just loading the driver and XDP cannot be enabled yet. This is not true when the FW goes through a resource or capability change. Resource reservations will be cancelled and reinitialized with XDP already enabled. devlink reload with XDP enabled will also have the same issue. This scenario will cause the ring arithmetic to be all wrong in the bnxt_init_dflt_ring_mode() path causing failure: bnxt_en 0000:a1:00.0 ens2f0np0: bnxt_setup_int_mode err: ffffffea bnxt_en 0000:a1:00.0 ens2f0np0: bnxt_request_irq err: ffffffea bnxt_en 0000:a1:00.0 ens2f0np0: nic open fail (rc: ffffffea) Fix it by properly accounting for XDP in the bnxt_init_dflt_ring_mode() path by using the refactored helper functions in the previous patch. Reviewed-by: Andy Gospodarek <andrew.gospodarek@broadcom.com> Reviewed-by: Pavan Chebbi <pavan.chebbi@broadcom.com> Reviewed-by: Kalesh AP <kalesh-anakkur.purayil@broadcom.com> Fixes: |
||
|
Michael Chan
|
ceee35e567 |
bnxt_en: Refactor some basic ring setup and adjustment logic
Refactor out the basic code that trims the default rings, sets up and adjusts XDP TX rings and CP rings. There is no change in behavior. This is to prepare for the next bug fix patch. Reviewed-by: Kalesh AP <kalesh-anakkur.purayil@broadcom.com> Reviewed-by: Pavan Chebbi <pavan.chebbi@broadcom.com> Reviewed-by: Andy Gospodarek <andrew.gospodarek@broadcom.com> Signed-off-by: Michael Chan <michael.chan@broadcom.com> Link: https://patch.msgid.link/20260331065138.948205-2-michael.chan@broadcom.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> |
||
|
Jakub Kicinski
|
a59dc0f871 |
Merge branch 'mlx5-misc-fixes-2026-03-30'
Tariq Toukan says: ==================== mlx5 misc fixes 2026-03-30 This patchset provides misc bug fixes from the team to the mlx5 core driver. ==================== Link: https://patch.msgid.link/20260330194015.53585-1-tariqt@nvidia.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> |
||
 Saeed Mahameed
|
403186400a |
net/mlx5: Fix switchdev mode rollback in case of failure
If for some internal reason switchdev mode fails, we rollback to legacy
mode, before this patch, rollback will unregister the uplink netdev and
leave it unregistered causing the below kernel bug.
To fix this, we need to avoid netdev unregister by setting the proper
rollback flag 'MLX5_PRIV_FLAGS_SWITCH_LEGACY' to indicate legacy mode.
devlink (431) used greatest stack depth: 11048 bytes left
mlx5_core 0000:00:03.0: E-Switch: Disable: mode(LEGACY), nvfs(0), \
necvfs(0), active vports(0)
mlx5_core 0000:00:03.0: E-Switch: Supported tc chains and prios offload
mlx5_core 0000:00:03.0: Loading uplink representor for vport 65535
mlx5_core 0000:00:03.0: mlx5_cmd_out_err:816:(pid 456): \
QUERY_HCA_CAP(0x100) op_mod(0x0) failed, \
status bad parameter(0x3), syndrome (0x3a3846), err(-22)
mlx5_core 0000:00:03.0 enp0s3np0 (unregistered): Unloading uplink \
representor for vport 65535
------------[ cut here ]------------
kernel BUG at net/core/dev.c:12070!
Oops: invalid opcode: 0000 [#1] SMP NOPTI
CPU: 2 UID: 0 PID: 456 Comm: devlink Not tainted 6.16.0-rc3+ \
#9 PREEMPT(voluntary)
RIP: 0010:unregister_netdevice_many_notify+0x123/0xae0
...
Call Trace:
[ 90.923094] unregister_netdevice_queue+0xad/0xf0
[ 90.923323] unregister_netdev+0x1c/0x40
[ 90.923522] mlx5e_vport_rep_unload+0x61/0xc6
[ 90.923736] esw_offloads_enable+0x8e6/0x920
[ 90.923947] mlx5_eswitch_enable_locked+0x349/0x430
[ 90.924182] ? is_mp_supported+0x57/0xb0
[ 90.924376] mlx5_devlink_eswitch_mode_set+0x167/0x350
[ 90.924628] devlink_nl_eswitch_set_doit+0x6f/0xf0
[ 90.924862] genl_family_rcv_msg_doit+0xe8/0x140
[ 90.925088] genl_rcv_msg+0x18b/0x290
[ 90.925269] ? __pfx_devlink_nl_pre_doit+0x10/0x10
[ 90.925506] ? __pfx_devlink_nl_eswitch_set_doit+0x10/0x10
[ 90.925766] ? __pfx_devlink_nl_post_doit+0x10/0x10
[ 90.926001] ? __pfx_genl_rcv_msg+0x10/0x10
[ 90.926206] netlink_rcv_skb+0x52/0x100
[ 90.926393] genl_rcv+0x28/0x40
[ 90.926557] netlink_unicast+0x27d/0x3d0
[ 90.926749] netlink_sendmsg+0x1f7/0x430
[ 90.926942] __sys_sendto+0x213/0x220
[ 90.927127] ? __sys_recvmsg+0x6a/0xd0
[ 90.927312] __x64_sys_sendto+0x24/0x30
[ 90.927504] do_syscall_64+0x50/0x1c0
[ 90.927687] entry_SYSCALL_64_after_hwframe+0x76/0x7e
[ 90.927929] RIP: 0033:0x7f7d0363e047
Fixes:
|
||
|
Saeed Mahameed
|
10dc35f6a4 |
net/mlx5: Avoid "No data available" when FW version queries fail
Avoid printing the misleading "kernel answers: No data available" devlink
output when querying firmware or pending firmware version fails
(e.g. MLX5 fw state errors / flash failures).
FW can fail on loading the pending flash image and get its version due
to various reasons, examples:
mlxfw: Firmware flash failed: key not applicable, err (7)
mlx5_fw_image_pending: can't read pending fw version while fw state is 1
and the resulting:
$ devlink dev info
kernel answers: No data available
Instead, just report 0 or 0xfff.. versions in case of failure to indicate
a problem, and let other information be shown.
after the fix:
$ devlink dev info
pci/0000:00:06.0:
driver mlx5_core
serial_number xxx...
board.serial_number MT2225300179
versions:
fixed:
fw.psid MT_0000000436
running:
fw.version 22.41.0188
fw 22.41.0188
stored:
fw.version 255.255.65535
fw 255.255.65535
Fixes:
|
||
 Shay Drory
|
bf16bca665 |
net/mlx5: lag: Check for LAG device before creating debugfs
__mlx5_lag_dev_add_mdev() may return 0 (success) even when an error
occurs that is handled gracefully. Consequently, the initialization
flow proceeds to call mlx5_ldev_add_debugfs() even when there is no
valid LAG context.
mlx5_ldev_add_debugfs() blindly created the debugfs directory and
attributes. This exposed interfaces (like the members file) that rely on
a valid ldev pointer, leading to potential NULL pointer dereferences if
accessed when ldev is NULL.
Add a check to verify that mlx5_lag_dev(dev) returns a valid pointer
before attempting to create the debugfs entries.
Fixes:
|
||
 Fedor Pchelkin
|
f0f367a4f4 |
net: macb: properly unregister fixed rate clocks
The additional resources allocated with clk_register_fixed_rate() need
to be released with clk_unregister_fixed_rate(), otherwise they are lost.
Fixes:
|
||
|
Fedor Pchelkin
|
ce8fe5287b |
net: macb: fix clk handling on PCI glue driver removal
platform_device_unregister() may still want to use the registered clks during runtime resume callback. Note that there is a commit |
||
 Srujana Challa
|
b4e5f04c58 |
virtio_net: clamp rss_max_key_size to NETDEV_RSS_KEY_LEN
rss_max_key_size in the virtio spec is the maximum key size supported by
the device, not a mandatory size the driver must use. Also the value 40
is a spec minimum, not a spec maximum.
The current code rejects RSS and can fail probe when the device reports a
larger rss_max_key_size than the driver buffer limit. Instead, clamp the
effective key length to min(device rss_max_key_size, NETDEV_RSS_KEY_LEN)
and keep RSS enabled.
This keeps probe working on devices that advertise larger maximum key sizes
while respecting the netdev RSS key buffer size limit.
Fixes:
|
||
 Yucheng Lu
|
d64cb81dcb |
net/sched: sch_netem: fix out-of-bounds access in packet corruption
In netem_enqueue(), the packet corruption logic uses
get_random_u32_below(skb_headlen(skb)) to select an index for
modifying skb->data. When an AF_PACKET TX_RING sends fully non-linear
packets over an IPIP tunnel, skb_headlen(skb) evaluates to 0.
Passing 0 to get_random_u32_below() takes the variable-ceil slow path
which returns an unconstrained 32-bit random integer. Using this
unconstrained value as an offset into skb->data results in an
out-of-bounds memory access.
Fix this by verifying skb_headlen(skb) is non-zero before attempting
to corrupt the linear data area. Fully non-linear packets will silently
bypass the corruption logic.
Fixes:
|
||
|
Jakub Kicinski
|
aba53ccf05 |
Merge tag 'nf-26-04-01' of git://git.kernel.org/pub/scm/linux/kernel/git/netfilter/nf
Pablo Neira Ayuso says:
====================
Netfilter fixes for net
The following patchset contains Netfilter fixes for net. Note that most
of the bugs fixed here are >5 years old. The large PR is not due to an
increase in regressions.
1) Flowtable hardware offload support in IPv6 can lead to out-of-bounds
when populating the rule action array when combined with double-tagged
vlan. Bump the maximum number of actions from 16 to 24 and check that
such limit is never reached, otherwise bail out. This bugs stems from
the original flowtable hardware offload support.
2) nfnetlink_log does not include the netlink header size of the trailing
NLMSG_DONE message when calculating the skb size. From Florian Westphal.
3) Reject names in xt_cgroup and xt_rateest extensions which are not
nul-terminated. Also from Florian.
4) Use nla_strcmp in ipset lookup by set name, since IPSET_ATTR_NAME and
IPSET_ATTR_NAMEREF are of NLA_STRING type. From Florian Westphal.
5) When unregistering conntrack helpers, pass the helper that is going
away so the expectation cleanup is done accordingly, otherwise UaF is
possible when accessing expectation that refer to the helper that is
gone. From Qi Tang.
6) Zero expectation NAT fields to address leaking kernel memory through
the expectation netlink dump when unset. Also from Qi Tang.
7) Use the master conntrack helper when creating expectations via
ctnetlink, ignore the suggested helper through CTA_EXPECT_HELP_NAME.
This allows to address a possible read of kernel memory off the
expectation object boundary.
8) Fix incorrect release of the hash bucket logic in ipset when the
bucket is empty, leading to shrinking the hash bucket to size 0
which deals to out-of-bound write in next element additions.
From Yifan Wu.
9) Allow the use of x_tables extensions that explicitly declare
NFPROTO_ARP support only. This is to avoid an incorrect hook number
validation due to non-overlapping arp and inet hook number
definitions.
10) Reject immediate NF_QUEUE verdict in nf_tables. The userspace
nft tool always uses the nft_queue expression for queueing.
This ensures this verdict cannot be used for the arp family,
which does supported this.
* tag 'nf-26-04-01' of git://git.kernel.org/pub/scm/linux/kernel/git/netfilter/nf:
netfilter: nf_tables: reject immediate NF_QUEUE verdict
netfilter: x_tables: restrict xt_check_match/xt_check_target extensions for NFPROTO_ARP
netfilter: ipset: drop logically empty buckets in mtype_del
netfilter: ctnetlink: ignore explicit helper on new expectations
netfilter: ctnetlink: zero expect NAT fields when CTA_EXPECT_NAT absent
netfilter: nf_conntrack_helper: pass helper to expect cleanup
netfilter: ipset: use nla_strcmp for IPSET_ATTR_NAME attr
netfilter: x_tables: ensure names are nul-terminated
netfilter: nfnetlink_log: account for netlink header size
netfilter: flowtable: strictly check for maximum number of actions
====================
Link: https://patch.msgid.link/20260401103646.1015423-1-pablo@netfilter.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
||
|
Jakub Kicinski
|
6d6be7070e |
Merge tag 'for-net-2026-04-01' of git://git.kernel.org/pub/scm/linux/kernel/git/bluetooth/bluetooth
Luiz Augusto von Dentz says: ==================== bluetooth pull request for net: - hci_sync: Fix UAF in le_read_features_complete - hci_sync: call destroy in hci_cmd_sync_run if immediate - hci_sync: hci_cmd_sync_queue_once() return -EEXIST if exists - hci_sync: fix leaks when hci_cmd_sync_queue_once fails - hci_sync: fix stack buffer overflow in hci_le_big_create_sync - hci_conn: fix potential UAF in set_cig_params_sync - hci_event: fix potential UAF in hci_le_remote_conn_param_req_evt - hci_event: move wake reason storage into validated event handlers - SMP: force responder MITM requirements before building the pairing response - SMP: derive legacy responder STK authentication from MITM state - MGMT: validate LTK enc_size on load - MGMT: validate mesh send advertising payload length - SCO: fix race conditions in sco_sock_connect() - hci_h4: Fix race during initialization * tag 'for-net-2026-04-01' of git://git.kernel.org/pub/scm/linux/kernel/git/bluetooth/bluetooth: Bluetooth: hci_sync: fix stack buffer overflow in hci_le_big_create_sync Bluetooth: SMP: derive legacy responder STK authentication from MITM state Bluetooth: SMP: force responder MITM requirements before building the pairing response Bluetooth: MGMT: validate mesh send advertising payload length Bluetooth: hci_event: fix potential UAF in hci_le_remote_conn_param_req_evt Bluetooth: hci_conn: fix potential UAF in set_cig_params_sync Bluetooth: MGMT: validate LTK enc_size on load Bluetooth: hci_h4: Fix race during initialization Bluetooth: hci_sync: Fix UAF in le_read_features_complete Bluetooth: hci_sync: fix leaks when hci_cmd_sync_queue_once fails Bluetooth: hci_sync: hci_cmd_sync_queue_once() return -EEXIST if exists Bluetooth: hci_event: move wake reason storage into validated event handlers Bluetooth: SCO: fix race conditions in sco_sock_connect() Bluetooth: hci_sync: call destroy in hci_cmd_sync_run if immediate ==================== Link: https://patch.msgid.link/20260401205834.2189162-1-luiz.dentz@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> |
||
 Weiming Shi
|
a54ecccfae |
rds: ib: reject FRMR registration before IB connection is established
rds_ib_get_mr() extracts the rds_ib_connection from conn->c_transport_data and passes it to rds_ib_reg_frmr() for FRWR memory registration. On a fresh outgoing connection, ic is allocated in rds_ib_conn_alloc() with i_cm_id = NULL because the connection worker has not yet called rds_ib_conn_path_connect() to create the rdma_cm_id. When sendmsg() with RDS_CMSG_RDMA_MAP is called on such a connection, the sendmsg path parses the control message before any connection establishment, allowing rds_ib_post_reg_frmr() to dereference ic->i_cm_id->qp and crash the kernel. The existing guard in rds_ib_reg_frmr() only checks for !ic (added in commit |
||
 Hangbin Liu
|
ffb5a4843c |
ipv6: fix data race in fib6_metric_set() using cmpxchg
fib6_metric_set() may be called concurrently from softirq context without
holding the FIB table lock. A typical path is:
ndisc_router_discovery()
spin_unlock_bh(&table->tb6_lock) <- lock released
fib6_metric_set(rt, RTAX_HOPLIMIT, ...) <- lockless call
When two CPUs process Router Advertisement packets for the same router
simultaneously, they can both arrive at fib6_metric_set() with the same
fib6_info pointer whose fib6_metrics still points to dst_default_metrics.
if (f6i->fib6_metrics == &dst_default_metrics) { /* both CPUs: true */
struct dst_metrics *p = kzalloc_obj(*p, GFP_ATOMIC);
refcount_set(&p->refcnt, 1);
f6i->fib6_metrics = p; /* CPU1 overwrites CPU0's p -> p0 leaked */
}
The dst_metrics allocated by the losing CPU has refcnt=1 but no pointer
to it anywhere in memory, producing a kmemleak report:
unreferenced object 0xff1100025aca1400 (size 96):
comm "softirq", pid 0, jiffies 4299271239
backtrace:
kmalloc_trace+0x28a/0x380
fib6_metric_set+0xcd/0x180
ndisc_router_discovery+0x12dc/0x24b0
icmpv6_rcv+0xc16/0x1360
Fix this by:
- Set val for p->metrics before published via cmpxchg() so the metrics
value is ready before the pointer becomes visible to other CPUs.
- Replace the plain pointer store with cmpxchg() and free the allocation
safely when competition failed.
- Add READ_ONCE()/WRITE_ONCE() for metrics[] setting in the non-default
metrics path to prevent compiler-based data races.
Fixes:
|
||
 hkbinbin
|
bc39a09473 |
Bluetooth: hci_sync: fix stack buffer overflow in hci_le_big_create_sync
hci_le_big_create_sync() uses DEFINE_FLEX to allocate a
struct hci_cp_le_big_create_sync on the stack with room for 0x11 (17)
BIS entries. However, conn->num_bis can hold up to HCI_MAX_ISO_BIS (31)
entries — validated against ISO_MAX_NUM_BIS (0x1f) in the caller
hci_conn_big_create_sync(). When conn->num_bis is between 18 and 31,
the memcpy that copies conn->bis into cp->bis writes up to 14 bytes
past the stack buffer, corrupting adjacent stack memory.
This is trivially reproducible: binding an ISO socket with
bc_num_bis = ISO_MAX_NUM_BIS (31) and calling listen() will
eventually trigger hci_le_big_create_sync() from the HCI command
sync worker, causing a KASAN-detectable stack-out-of-bounds write:
BUG: KASAN: stack-out-of-bounds in hci_le_big_create_sync+0x256/0x3b0
Write of size 31 at addr ffffc90000487b48 by task kworker/u9:0/71
Fix this by changing the DEFINE_FLEX count from the incorrect 0x11 to
HCI_MAX_ISO_BIS, which matches the maximum number of BIS entries that
conn->bis can actually carry.
Fixes:
|
||
 Oleh Konko
|
20756fec2f |
Bluetooth: SMP: derive legacy responder STK authentication from MITM state
The legacy responder path in smp_random() currently labels the stored
STK as authenticated whenever pending_sec_level is BT_SECURITY_HIGH.
That reflects what the local service requested, not what the pairing
flow actually achieved.
For Just Works/Confirm legacy pairing, SMP_FLAG_MITM_AUTH stays clear
and the resulting STK should remain unauthenticated even if the local
side requested HIGH security. Use the established MITM state when
storing the responder STK so the key metadata matches the pairing result.
This also keeps the legacy path aligned with the Secure Connections code,
which already treats JUST_WORKS/JUST_CFM as unauthenticated.
Fixes:
|
||
|
Oleh Konko
|
d05111bfe3 |
Bluetooth: SMP: force responder MITM requirements before building the pairing response
smp_cmd_pairing_req() currently builds the pairing response from the
initiator auth_req before enforcing the local BT_SECURITY_HIGH
requirement. If the initiator omits SMP_AUTH_MITM, the response can
also omit it even though the local side still requires MITM.
tk_request() then sees an auth value without SMP_AUTH_MITM and may
select JUST_CFM, making method selection inconsistent with the pairing
policy the responder already enforces.
When the local side requires HIGH security, first verify that MITM can
be achieved from the IO capabilities and then force SMP_AUTH_MITM in the
response in both rsp.auth_req and auth. This keeps the responder auth bits
and later method selection aligned.
Fixes:
|
||
 Keenan Dong
|
bda93eec78 |
Bluetooth: MGMT: validate mesh send advertising payload length
mesh_send() currently bounds MGMT_OP_MESH_SEND by total command
length, but it never verifies that the bytes supplied for the
flexible adv_data[] array actually match the embedded adv_data_len
field. MGMT_MESH_SEND_SIZE only covers the fixed header, so a
truncated command can still pass the existing 20..50 byte range
check and later drive the async mesh send path past the end of the
queued command buffer.
Keep rejecting zero-length and oversized advertising payloads, but
validate adv_data_len explicitly and require the command length to
exactly match the flexible array size before queueing the request.
Fixes:
|
||
 Pauli Virtanen
|
b255531b27 |
Bluetooth: hci_event: fix potential UAF in hci_le_remote_conn_param_req_evt
hci_conn lookup and field access must be covered by hdev lock in
hci_le_remote_conn_param_req_evt, otherwise it's possible it is freed
concurrently.
Extend the hci_dev_lock critical section to cover all conn usage.
Fixes:
|
||
|
Pauli Virtanen
|
a2639a7f0f |
Bluetooth: hci_conn: fix potential UAF in set_cig_params_sync
hci_conn lookup and field access must be covered by hdev lock in
set_cig_params_sync, otherwise it's possible it is freed concurrently.
Take hdev lock to prevent hci_conn from being deleted or modified
concurrently. Just RCU lock is not suitable here, as we also want to
avoid "tearing" in the configuration.
Fixes:
|
||
|
Keenan Dong
|
b8dbe9648d |
Bluetooth: MGMT: validate LTK enc_size on load
Load Long Term Keys stores the user-provided enc_size and later uses
it to size fixed-size stack operations when replying to LE LTK
requests. An enc_size larger than the 16-byte key buffer can therefore
overflow the reply stack buffer.
Reject oversized enc_size values while validating the management LTK
record so invalid keys never reach the stored key state.
Fixes:
|
||
 Jonathan Rissanen
|
0ffac654e9 |
Bluetooth: hci_h4: Fix race during initialization
Commit |
||
 Luiz Augusto von Dentz
|
035c25007c |
Bluetooth: hci_sync: Fix UAF in le_read_features_complete
This fixes the following backtrace caused by hci_conn being freed
before le_read_features_complete but after
hci_le_read_remote_features_sync so hci_conn_del -> hci_cmd_sync_dequeue
is not able to prevent it:
==================================================================
BUG: KASAN: slab-use-after-free in instrument_atomic_read_write include/linux/instrumented.h:96 [inline]
BUG: KASAN: slab-use-after-free in atomic_dec_and_test include/linux/atomic/atomic-instrumented.h:1383 [inline]
BUG: KASAN: slab-use-after-free in hci_conn_drop include/net/bluetooth/hci_core.h:1688 [inline]
BUG: KASAN: slab-use-after-free in le_read_features_complete+0x5b/0x340 net/bluetooth/hci_sync.c:7344
Write of size 4 at addr ffff8880796b0010 by task kworker/u9:0/52
CPU: 0 UID: 0 PID: 52 Comm: kworker/u9:0 Not tainted syzkaller #0 PREEMPT(full)
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 10/25/2025
Workqueue: hci0 hci_cmd_sync_work
Call Trace:
<TASK>
__dump_stack lib/dump_stack.c:94 [inline]
dump_stack_lvl+0x116/0x1f0 lib/dump_stack.c:120
print_address_description mm/kasan/report.c:378 [inline]
print_report+0xcd/0x630 mm/kasan/report.c:482
kasan_report+0xe0/0x110 mm/kasan/report.c:595
check_region_inline mm/kasan/generic.c:194 [inline]
kasan_check_range+0x100/0x1b0 mm/kasan/generic.c:200
instrument_atomic_read_write include/linux/instrumented.h:96 [inline]
atomic_dec_and_test include/linux/atomic/atomic-instrumented.h:1383 [inline]
hci_conn_drop include/net/bluetooth/hci_core.h:1688 [inline]
le_read_features_complete+0x5b/0x340 net/bluetooth/hci_sync.c:7344
hci_cmd_sync_work+0x1ff/0x430 net/bluetooth/hci_sync.c:334
process_one_work+0x9ba/0x1b20 kernel/workqueue.c:3257
process_scheduled_works kernel/workqueue.c:3340 [inline]
worker_thread+0x6c8/0xf10 kernel/workqueue.c:3421
kthread+0x3c5/0x780 kernel/kthread.c:463
ret_from_fork+0x983/0xb10 arch/x86/kernel/process.c:158
ret_from_fork_asm+0x1a/0x30 arch/x86/entry/entry_64.S:246
</TASK>
Allocated by task 5932:
kasan_save_stack+0x33/0x60 mm/kasan/common.c:56
kasan_save_track+0x14/0x30 mm/kasan/common.c:77
poison_kmalloc_redzone mm/kasan/common.c:400 [inline]
__kasan_kmalloc+0xaa/0xb0 mm/kasan/common.c:417
kmalloc_noprof include/linux/slab.h:957 [inline]
kzalloc_noprof include/linux/slab.h:1094 [inline]
__hci_conn_add+0xf8/0x1c70 net/bluetooth/hci_conn.c:963
hci_conn_add_unset+0x76/0x100 net/bluetooth/hci_conn.c:1084
le_conn_complete_evt+0x639/0x1f20 net/bluetooth/hci_event.c:5714
hci_le_enh_conn_complete_evt+0x23d/0x380 net/bluetooth/hci_event.c:5861
hci_le_meta_evt+0x357/0x5e0 net/bluetooth/hci_event.c:7408
hci_event_func net/bluetooth/hci_event.c:7716 [inline]
hci_event_packet+0x685/0x11c0 net/bluetooth/hci_event.c:7773
hci_rx_work+0x2c9/0xeb0 net/bluetooth/hci_core.c:4076
process_one_work+0x9ba/0x1b20 kernel/workqueue.c:3257
process_scheduled_works kernel/workqueue.c:3340 [inline]
worker_thread+0x6c8/0xf10 kernel/workqueue.c:3421
kthread+0x3c5/0x780 kernel/kthread.c:463
ret_from_fork+0x983/0xb10 arch/x86/kernel/process.c:158
ret_from_fork_asm+0x1a/0x30 arch/x86/entry/entry_64.S:246
Freed by task 5932:
kasan_save_stack+0x33/0x60 mm/kasan/common.c:56
kasan_save_track+0x14/0x30 mm/kasan/common.c:77
__kasan_save_free_info+0x3b/0x60 mm/kasan/generic.c:587
kasan_save_free_info mm/kasan/kasan.h:406 [inline]
poison_slab_object mm/kasan/common.c:252 [inline]
__kasan_slab_free+0x5f/0x80 mm/kasan/common.c:284
kasan_slab_free include/linux/kasan.h:234 [inline]
slab_free_hook mm/slub.c:2540 [inline]
slab_free mm/slub.c:6663 [inline]
kfree+0x2f8/0x6e0 mm/slub.c:6871
device_release+0xa4/0x240 drivers/base/core.c:2565
kobject_cleanup lib/kobject.c:689 [inline]
kobject_release lib/kobject.c:720 [inline]
kref_put include/linux/kref.h:65 [inline]
kobject_put+0x1e7/0x590 lib/kobject.c:737
put_device drivers/base/core.c:3797 [inline]
device_unregister+0x2f/0xc0 drivers/base/core.c:3920
hci_conn_del_sysfs+0xb4/0x180 net/bluetooth/hci_sysfs.c:79
hci_conn_cleanup net/bluetooth/hci_conn.c:173 [inline]
hci_conn_del+0x657/0x1180 net/bluetooth/hci_conn.c:1234
hci_disconn_complete_evt+0x410/0xa00 net/bluetooth/hci_event.c:3451
hci_event_func net/bluetooth/hci_event.c:7719 [inline]
hci_event_packet+0xa10/0x11c0 net/bluetooth/hci_event.c:7773
hci_rx_work+0x2c9/0xeb0 net/bluetooth/hci_core.c:4076
process_one_work+0x9ba/0x1b20 kernel/workqueue.c:3257
process_scheduled_works kernel/workqueue.c:3340 [inline]
worker_thread+0x6c8/0xf10 kernel/workqueue.c:3421
kthread+0x3c5/0x780 kernel/kthread.c:463
ret_from_fork+0x983/0xb10 arch/x86/kernel/process.c:158
ret_from_fork_asm+0x1a/0x30 arch/x86/entry/entry_64.S:246
The buggy address belongs to the object at ffff8880796b0000
which belongs to the cache kmalloc-8k of size 8192
The buggy address is located 16 bytes inside of
freed 8192-byte region [ffff8880796b0000, ffff8880796b2000)
The buggy address belongs to the physical page:
page: refcount:0 mapcount:0 mapping:0000000000000000 index:0x0 pfn:0x796b0
head: order:3 mapcount:0 entire_mapcount:0 nr_pages_mapped:0 pincount:0
anon flags: 0xfff00000000040(head|node=0|zone=1|lastcpupid=0x7ff)
page_type: f5(slab)
raw: 00fff00000000040 ffff88813ff27280 0000000000000000 0000000000000001
raw: 0000000000000000 0000000000020002 00000000f5000000 0000000000000000
head: 00fff00000000040 ffff88813ff27280 0000000000000000 0000000000000001
head: 0000000000000000 0000000000020002 00000000f5000000 0000000000000000
head: 00fff00000000003 ffffea0001e5ac01 00000000ffffffff 00000000ffffffff
head: ffffffffffffffff 0000000000000000 00000000ffffffff 0000000000000008
page dumped because: kasan: bad access detected
page_owner tracks the page as allocated
page last allocated via order 3, migratetype Unmovable, gfp_mask 0xd2040(__GFP_IO|__GFP_NOWARN|__GFP_NORETRY|__GFP_COMP|__GFP_NOMEMALLOC), pid 5657, tgid 5657 (dhcpcd-run-hook), ts 79819636908, free_ts 79814310558
set_page_owner include/linux/page_owner.h:32 [inline]
post_alloc_hook+0x1af/0x220 mm/page_alloc.c:1845
prep_new_page mm/page_alloc.c:1853 [inline]
get_page_from_freelist+0xd0b/0x31a0 mm/page_alloc.c:3879
__alloc_frozen_pages_noprof+0x25f/0x2440 mm/page_alloc.c:5183
alloc_pages_mpol+0x1fb/0x550 mm/mempolicy.c:2416
alloc_slab_page mm/slub.c:3075 [inline]
allocate_slab mm/slub.c:3248 [inline]
new_slab+0x2c3/0x430 mm/slub.c:3302
___slab_alloc+0xe18/0x1c90 mm/slub.c:4651
__slab_alloc.constprop.0+0x63/0x110 mm/slub.c:4774
__slab_alloc_node mm/slub.c:4850 [inline]
slab_alloc_node mm/slub.c:5246 [inline]
__kmalloc_cache_noprof+0x477/0x800 mm/slub.c:5766
kmalloc_noprof include/linux/slab.h:957 [inline]
kzalloc_noprof include/linux/slab.h:1094 [inline]
tomoyo_print_bprm security/tomoyo/audit.c:26 [inline]
tomoyo_init_log+0xc8a/0x2140 security/tomoyo/audit.c:264
tomoyo_supervisor+0x302/0x13b0 security/tomoyo/common.c:2198
tomoyo_audit_env_log security/tomoyo/environ.c:36 [inline]
tomoyo_env_perm+0x191/0x200 security/tomoyo/environ.c:63
tomoyo_environ security/tomoyo/domain.c:672 [inline]
tomoyo_find_next_domain+0xec1/0x20b0 security/tomoyo/domain.c:888
tomoyo_bprm_check_security security/tomoyo/tomoyo.c:102 [inline]
tomoyo_bprm_check_security+0x12d/0x1d0 security/tomoyo/tomoyo.c:92
security_bprm_check+0x1b9/0x1e0 security/security.c:794
search_binary_handler fs/exec.c:1659 [inline]
exec_binprm fs/exec.c:1701 [inline]
bprm_execve fs/exec.c:1753 [inline]
bprm_execve+0x81e/0x1620 fs/exec.c:1729
do_execveat_common.isra.0+0x4a5/0x610 fs/exec.c:1859
page last free pid 5657 tgid 5657 stack trace:
reset_page_owner include/linux/page_owner.h:25 [inline]
free_pages_prepare mm/page_alloc.c:1394 [inline]
__free_frozen_pages+0x7df/0x1160 mm/page_alloc.c:2901
discard_slab mm/slub.c:3346 [inline]
__put_partials+0x130/0x170 mm/slub.c:3886
qlink_free mm/kasan/quarantine.c:163 [inline]
qlist_free_all+0x4c/0xf0 mm/kasan/quarantine.c:179
kasan_quarantine_reduce+0x195/0x1e0 mm/kasan/quarantine.c:286
__kasan_slab_alloc+0x69/0x90 mm/kasan/common.c:352
kasan_slab_alloc include/linux/kasan.h:252 [inline]
slab_post_alloc_hook mm/slub.c:4948 [inline]
slab_alloc_node mm/slub.c:5258 [inline]
__kmalloc_cache_noprof+0x274/0x800 mm/slub.c:5766
kmalloc_noprof include/linux/slab.h:957 [inline]
tomoyo_print_header security/tomoyo/audit.c:156 [inline]
tomoyo_init_log+0x197/0x2140 security/tomoyo/audit.c:255
tomoyo_supervisor+0x302/0x13b0 security/tomoyo/common.c:2198
tomoyo_audit_env_log security/tomoyo/environ.c:36 [inline]
tomoyo_env_perm+0x191/0x200 security/tomoyo/environ.c:63
tomoyo_environ security/tomoyo/domain.c:672 [inline]
tomoyo_find_next_domain+0xec1/0x20b0 security/tomoyo/domain.c:888
tomoyo_bprm_check_security security/tomoyo/tomoyo.c:102 [inline]
tomoyo_bprm_check_security+0x12d/0x1d0 security/tomoyo/tomoyo.c:92
security_bprm_check+0x1b9/0x1e0 security/security.c:794
search_binary_handler fs/exec.c:1659 [inline]
exec_binprm fs/exec.c:1701 [inline]
bprm_execve fs/exec.c:1753 [inline]
bprm_execve+0x81e/0x1620 fs/exec.c:1729
do_execveat_common.isra.0+0x4a5/0x610 fs/exec.c:1859
do_execve fs/exec.c:1933 [inline]
__do_sys_execve fs/exec.c:2009 [inline]
__se_sys_execve fs/exec.c:2004 [inline]
__x64_sys_execve+0x8e/0xb0 fs/exec.c:2004
do_syscall_x64 arch/x86/entry/syscall_64.c:63 [inline]
do_syscall_64+0xcd/0xf80 arch/x86/entry/syscall_64.c:94
Memory state around the buggy address:
ffff8880796aff00: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc
ffff8880796aff80: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc
>ffff8880796b0000: fa fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
^
ffff8880796b0080: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
ffff8880796b0100: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
==================================================================
Fixes:
|
||
|
Pauli Virtanen
|
aca377208e |
Bluetooth: hci_sync: fix leaks when hci_cmd_sync_queue_once fails
When hci_cmd_sync_queue_once() returns with error, the destroy callback will not be called. Fix leaking references / memory on these failures. Signed-off-by: Pauli Virtanen <pav@iki.fi> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com> |
||
|
Pauli Virtanen
|
2969554bcf |
Bluetooth: hci_sync: hci_cmd_sync_queue_once() return -EEXIST if exists
hci_cmd_sync_queue_once() needs to indicate whether a queue item was added, so caller can know if callbacks are called, so it can avoid leaking resources. Change the function to return -EEXIST if queue item already exists. Modify all callsites to handle that. Signed-off-by: Pauli Virtanen <pav@iki.fi> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com> |
||
|
Oleh Konko
|
2b2bf47cd7 |
Bluetooth: hci_event: move wake reason storage into validated event handlers
hci_store_wake_reason() is called from hci_event_packet() immediately
after stripping the HCI event header but before hci_event_func()
enforces the per-event minimum payload length from hci_ev_table.
This means a short HCI event frame can reach bacpy() before any bounds
check runs.
Rather than duplicating skb parsing and per-event length checks inside
hci_store_wake_reason(), move wake-address storage into the individual
event handlers after their existing event-length validation has
succeeded. Convert hci_store_wake_reason() into a small helper that only
stores an already-validated bdaddr while the caller holds hci_dev_lock().
Use the same helper after hci_event_func() with a NULL address to
preserve the existing unexpected-wake fallback semantics when no
validated event handler records a wake address.
Annotate the helper with __must_hold(&hdev->lock) and add
lockdep_assert_held(&hdev->lock) so future call paths keep the lock
contract explicit.
Call the helper from hci_conn_request_evt(), hci_conn_complete_evt(),
hci_sync_conn_complete_evt(), le_conn_complete_evt(),
hci_le_adv_report_evt(), hci_le_ext_adv_report_evt(),
hci_le_direct_adv_report_evt(), hci_le_pa_sync_established_evt(), and
hci_le_past_received_evt().
Fixes:
|
||
 Cen Zhang
|
8a5b0135d4 |
Bluetooth: SCO: fix race conditions in sco_sock_connect()
sco_sock_connect() checks sk_state and sk_type without holding
the socket lock. Two concurrent connect() syscalls on the same
socket can both pass the check and enter sco_connect(), leading
to use-after-free.
The buggy scenario involves three participants and was confirmed
with additional logging instrumentation:
Thread A (connect): HCI disconnect: Thread B (connect):
sco_sock_connect(sk) sco_sock_connect(sk)
sk_state==BT_OPEN sk_state==BT_OPEN
(pass, no lock) (pass, no lock)
sco_connect(sk): sco_connect(sk):
hci_dev_lock hci_dev_lock
hci_connect_sco <- blocked
-> hcon1
sco_conn_add->conn1
lock_sock(sk)
sco_chan_add:
conn1->sk = sk
sk->conn = conn1
sk_state=BT_CONNECT
release_sock
hci_dev_unlock
hci_dev_lock
sco_conn_del:
lock_sock(sk)
sco_chan_del:
sk->conn=NULL
conn1->sk=NULL
sk_state=
BT_CLOSED
SOCK_ZAPPED
release_sock
hci_dev_unlock
(unblocked)
hci_connect_sco
-> hcon2
sco_conn_add
-> conn2
lock_sock(sk)
sco_chan_add:
sk->conn=conn2
sk_state=
BT_CONNECT
// zombie sk!
release_sock
hci_dev_unlock
Thread B revives a BT_CLOSED + SOCK_ZAPPED socket back to
BT_CONNECT. Subsequent cleanup triggers double sock_put() and
use-after-free. Meanwhile conn1 is leaked as it was orphaned
when sco_conn_del() cleared the association.
Fix this by:
- Moving lock_sock() before the sk_state/sk_type checks in
sco_sock_connect() to serialize concurrent connect attempts
- Fixing the sk_type != SOCK_SEQPACKET check to actually
return the error instead of just assigning it
- Adding a state re-check in sco_connect() after lock_sock()
to catch state changes during the window between the locks
- Adding sco_pi(sk)->conn check in sco_chan_add() to prevent
double-attach of a socket to multiple connections
- Adding hci_conn_drop() on sco_chan_add failure to prevent
HCI connection leaks
Fixes:
|
||
|
Pauli Virtanen
|
a834a0b66e |
Bluetooth: hci_sync: call destroy in hci_cmd_sync_run if immediate
hci_cmd_sync_run() may run the work immediately if called from existing
sync work (otherwise it queues a new sync work). In this case it fails
to call the destroy() function.
On immediate run, make it behave same way as if item was queued
successfully: call destroy, and return 0.
The only callsite is hci_abort_conn() via hci_cmd_sync_run_once(), and
this changes its return value. However, its return value is not used
except as the return value for hci_disconnect(), and nothing uses the
return value of hci_disconnect(). Hence there should be no behavior
change anywhere.
Fixes:
|
||
 Simon Trimmer
|
e74c38ef6f |
ASoC: amd: ps: Fix missing leading zeros in subsystem_device SSID log
Ensure that subsystem_device is printed with leading zeros when combined with subsystem_vendor to form the SSID. Without this, devices with upper bits unset may appear to have an incorrect SSID in the debug output. Signed-off-by: Simon Trimmer <simont@opensource.cirrus.com> Link: https://patch.msgid.link/20260331131916.145546-1-simont@opensource.cirrus.com Signed-off-by: Mark Brown <broonie@kernel.org> |
||
 Pablo Neira Ayuso
|
da107398cb |
netfilter: nf_tables: reject immediate NF_QUEUE verdict
nft_queue is always used from userspace nftables to deliver the NF_QUEUE
verdict. Immediately emitting an NF_QUEUE verdict is never used by the
userspace nft tools, so reject immediate NF_QUEUE verdicts.
The arp family does not provide queue support, but such an immediate
verdict is still reachable. Globally reject NF_QUEUE immediate verdicts
to address this issue.
Fixes:
|