Extracts IOTLB and Dev-IOTLB invalidation logic from cache tag flush
interfaces into dedicated helper functions. It prepares the codebase
for upcoming changes to support batched cache invalidations.
To enable direct use of qi_flush helpers in the new functions,
iommu->flush.flush_iotlb and quirk_extra_dev_tlb_flush() are opened up.
No functional changes are intended.
Co-developed-by: Lu Baolu <baolu.lu@linux.intel.com>
Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com>
Signed-off-by: Tina Zhang <tina.zhang@intel.com>
Link: https://lore.kernel.org/r/20240815065221.50328-3-tina.zhang@intel.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Separate the logic for constructing IOTLB and device TLB invalidation
descriptors from the qi_flush interfaces. New helpers, qi_desc(), are
introduced to encapsulate this common functionality.
Moving descriptor composition code to new helpers enables its reuse in
the upcoming qi_batch interfaces.
No functional changes are intended.
Signed-off-by: Tina Zhang <tina.zhang@intel.com>
Link: https://lore.kernel.org/r/20240815065221.50328-2-tina.zhang@intel.com
Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
The caching mode of an IOMMU is irrelevant to the behavior of the device
TLB. Previously, commit <304b3bde24b5> ("iommu/vt-d: Remove caching mode
check before device TLB flush") removed this redundant check in the
domain unmap path.
Checking the caching mode before flushing the device TLB after a pasid
table entry is updated is unnecessary and can lead to inconsistent
behavior.
Extends this consistency by removing the caching mode check in the pasid
table update path.
Suggested-by: Yi Liu <yi.l.liu@intel.com>
Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com>
Link: https://lore.kernel.org/r/20240820030208.20020-1-baolu.lu@linux.intel.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
If qi_submit_sync() is invoked with 0 invalidation descriptors (for
instance, for DMA draining purposes), we can run into a bug where a
submitting thread fails to detect the completion of invalidation_wait.
Subsequently, this led to a soft lockup. Currently, there is no impact
by this bug on the existing users because no callers are submitting
invalidations with 0 descriptors. This fix will enable future users
(such as DMA drain) calling qi_submit_sync() with 0 count.
Suppose thread T1 invokes qi_submit_sync() with non-zero descriptors, while
concurrently, thread T2 calls qi_submit_sync() with zero descriptors. Both
threads then enter a while loop, waiting for their respective descriptors
to complete. T1 detects its completion (i.e., T1's invalidation_wait status
changes to QI_DONE by HW) and proceeds to call reclaim_free_desc() to
reclaim all descriptors, potentially including adjacent ones of other
threads that are also marked as QI_DONE.
During this time, while T2 is waiting to acquire the qi->q_lock, the IOMMU
hardware may complete the invalidation for T2, setting its status to
QI_DONE. However, if T1's execution of reclaim_free_desc() frees T2's
invalidation_wait descriptor and changes its status to QI_FREE, T2 will
not observe the QI_DONE status for its invalidation_wait and will
indefinitely remain stuck.
This soft lockup does not occur when only non-zero descriptors are
submitted.In such cases, invalidation descriptors are interspersed among
wait descriptors with the status QI_IN_USE, acting as barriers. These
barriers prevent the reclaim code from mistakenly freeing descriptors
belonging to other submitters.
Considered the following example timeline:
T1 T2
========================================
ID1
WD1
while(WD1!=QI_DONE)
unlock
lock
WD1=QI_DONE* WD2
while(WD2!=QI_DONE)
unlock
lock
WD1==QI_DONE?
ID1=QI_DONE WD2=DONE*
reclaim()
ID1=FREE
WD1=FREE
WD2=FREE
unlock
soft lockup! T2 never sees QI_DONE in WD2
Where:
ID = invalidation descriptor
WD = wait descriptor
* Written by hardware
The root of the problem is that the descriptor status QI_DONE flag is used
for two conflicting purposes:
1. signal a descriptor is ready for reclaim (to be freed)
2. signal by the hardware that a wait descriptor is complete
The solution (in this patch) is state separation by using QI_FREE flag
for #1.
Once a thread's invalidation descriptors are complete, their status would
be set to QI_FREE. The reclaim_free_desc() function would then only
free descriptors marked as QI_FREE instead of those marked as
QI_DONE. This change ensures that T2 (from the previous example) will
correctly observe the completion of its invalidation_wait (marked as
QI_DONE).
Signed-off-by: Sanjay K Kumar <sanjay.k.kumar@intel.com>
Signed-off-by: Jacob Pan <jacob.jun.pan@linux.intel.com>
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Link: https://lore.kernel.org/r/20240728210059.1964602-1-jacob.jun.pan@linux.intel.com
Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Software determines VT-d hardware support for passthrough translation by
inspecting the capability register. If passthrough translation is not
supported, the device is instructed to use DMA domain for its default
domain.
Add a global static identity domain with guaranteed attach semantics for
IOMMUs that support passthrough translation mode.
The global static identity domain is a dummy domain without corresponding
dmar_domain structure. Consequently, the device's info->domain will be
NULL with the identity domain is attached. Refactor the code accordingly.
Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com>
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Link: https://lore.kernel.org/r/20240809055431.36513-7-baolu.lu@linux.intel.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
The has_iotlb_device flag was used to indicate if a domain had attached
devices with ATS enabled. Domains without this flag didn't require device
TLB invalidation during unmap operations, optimizing performance by
avoiding unnecessary device iteration.
With the introduction of cache tags, this flag is no longer needed. The
code to iterate over attached devices was removed by commit 06792d0679
("iommu/vt-d: Cleanup use of iommu_flush_iotlb_psi()").
Remove has_iotlb_device to avoid unnecessary code.
Suggested-by: Jason Gunthorpe <jgg@nvidia.com>
Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com>
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Link: https://lore.kernel.org/r/20240809055431.36513-5-baolu.lu@linux.intel.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
The iommu core defines the def_domain_type callback to query the iommu
driver about hardware capability and quirks. The iommu driver should
declare IOMMU_DOMAIN_DMA requirement for hardware lacking pass-through
capability.
Earlier VT-d hardware implementations did not support pass-through
translation mode. The iommu driver relied on a paging domain with all
physical system memory addresses identically mapped to the same IOVA
to simulate pass-through translation before the def_domain_type was
introduced and it has been kept until now. It's time to adjust it now
to make the Intel iommu driver follow the def_domain_type semantics.
Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com>
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Reviewed-by: Jerry Snitselaar <jsnitsel@redhat.com>
Link: https://lore.kernel.org/r/20240809055431.36513-2-baolu.lu@linux.intel.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Pull x86 fixes from Thomas Gleixner:
- Fix 32-bit PTI for real.
pti_clone_entry_text() is called twice, once before initcalls so that
initcalls can use the user-mode helper and then again after text is
set read only. Setting read only on 32-bit might break up the PMD
mapping, which makes the second invocation of pti_clone_entry_text()
find the mappings out of sync and failing.
Allow the second call to split the existing PMDs in the user mapping
and synchronize with the kernel mapping.
- Don't make acpi_mp_wake_mailbox read-only after init as the mail box
must be writable in the case that CPU hotplug operations happen after
boot. Otherwise the attempt to start a CPU crashes with a write to
read only memory.
- Add a missing sanity check in mtrr_save_state() to ensure that the
fixed MTRR MSRs are supported.
Otherwise mtrr_save_state() ends up in a #GP, which is fixed up, but
the WARN_ON() can bring systems down when panic on warn is set.
* tag 'x86-urgent-2024-08-11' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/mtrr: Check if fixed MTRRs exist before saving them
x86/paravirt: Fix incorrect virt spinlock setting on bare metal
x86/acpi: Remove __ro_after_init from acpi_mp_wake_mailbox
x86/mm: Fix PTI for i386 some more
Pull time keeping fixes from Thomas Gleixner:
- Fix a couple of issues in the NTP code where user supplied values are
neither sanity checked nor clamped to the operating range. This
results in integer overflows and eventualy NTP getting out of sync.
According to the history the sanity checks had been removed in favor
of clamping the values, but the clamping never worked correctly under
all circumstances. The NTP people asked to not bring the sanity
checks back as it might break existing applications.
Make the clamping work correctly and add it where it's missing
- If adjtimex() sets the clock it has to trigger the hrtimer subsystem
so it can adjust and if the clock was set into the future expire
timers if needed. The caller should provide a bitmask to tell
hrtimers which clocks have been adjusted.
adjtimex() uses not the proper constant and uses CLOCK_REALTIME
instead, which is 0. So hrtimers adjusts only the clocks, but does
not check for expired timers, which might make them expire really
late. Use the proper bitmask constant instead.
* tag 'timers-urgent-2024-08-11' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
timekeeping: Fix bogus clock_was_set() invocation in do_adjtimex()
ntp: Safeguard against time_constant overflow
ntp: Clamp maxerror and esterror to operating range
Pull irq fixes from Thomas Gleixner:
"Three small fixes for interrupt core and drivers:
- The interrupt core fails to honor caller supplied affinity hints
for non-managed interrupts and uses the system default affinity on
startup instead. Set the missing flag in the descriptor to tell the
core to use the provided affinity.
- Fix a shift out of bounds error in the Xilinx driver
- Handle switching to level trigger correctly in the RISCV APLIC
driver. It failed to retrigger the interrupt which causes it to
become stale"
* tag 'irq-urgent-2024-08-11' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
irqchip/riscv-aplic: Retrigger MSI interrupt on source configuration
irqchip/xilinx: Fix shift out of bounds
genirq/irqdesc: Honor caller provided affinity in alloc_desc()
Pull USB fixes from Greg KH:
"Here are a number of small USB driver fixes for reported issues for
6.11-rc3. Included in here are:
- usb serial driver MODULE_DESCRIPTION() updates
- usb serial driver fixes
- typec driver fixes
- usb-ip driver fix
- gadget driver fixes
- dt binding update
All of these have been in linux-next with no reported issues"
* tag 'usb-6.11-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb:
usb: typec: ucsi: Fix a deadlock in ucsi_send_command_common()
usb: typec: tcpm: avoid sink goto SNK_UNATTACHED state if not received source capability message
usb: gadget: f_fs: pull out f->disable() from ffs_func_set_alt()
usb: gadget: f_fs: restore ffs_func_disable() functionality
USB: serial: debug: do not echo input by default
usb: typec: tipd: Delete extra semi-colon
usb: typec: tipd: Fix dereferencing freeing memory in tps6598x_apply_patch()
usb: gadget: u_serial: Set start_delayed during suspend
usb: typec: tcpci: Fix error code in tcpci_check_std_output_cap()
usb: typec: fsa4480: Check if the chip is really there
usb: gadget: core: Check for unset descriptor
usb: vhci-hcd: Do not drop references before new references are gained
usb: gadget: u_audio: Check return codes from usb_ep_enable and config_ep_by_speed.
usb: gadget: midi2: Fix the response for FB info with block 0xff
dt-bindings: usb: microchip,usb2514: Add USB2517 compatible
USB: serial: garmin_gps: use struct_size() to allocate pkt
USB: serial: garmin_gps: annotate struct garmin_packet with __counted_by
USB: serial: add missing MODULE_DESCRIPTION() macros
USB: serial: spcp8x5: remove unused struct 'spcp8x5_usb_ctrl_arg'
Pull tty / serial driver fixes from Greg KH:
"Here are some small tty and serial driver fixes for reported problems
for 6.11-rc3. Included in here are:
- sc16is7xx serial driver fixes
- uartclk bugfix for a divide by zero issue
- conmakehash userspace build issue fix
All of these have been in linux-next for a while with no reported
issues"
* tag 'tty-6.11-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty:
tty: vt: conmakehash: cope with abs_srctree no longer in env
serial: sc16is7xx: fix invalid FIFO access with special register set
serial: sc16is7xx: fix TX fifo corruption
serial: core: check uartclk for zero to avoid divide by zero
Pull driver core / documentation fixes from Greg KH:
"Here are some small fixes, and some documentation updates for
6.11-rc3. Included in here are:
- embargoed hardware documenation updates based on a lot of review by
legal-types in lots of companies to try to make the process a _bit_
easier for us to manage over time.
- rust firmware documentation fix
- driver detach race fix for the fix that went into 6.11-rc1
All of these have been in linux-next for a while with no reported
issues"
* tag 'driver-core-6.11-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core:
driver core: Fix uevent_show() vs driver detach race
Documentation: embargoed-hardware-issues.rst: add a section documenting the "early access" process
Documentation: embargoed-hardware-issues.rst: minor cleanups and fixes
rust: firmware: fix invalid rustdoc link
Pull char/misc fixes from Greg KH:
"Here are some small char/misc/other driver fixes for 6.11-rc3 for
reported issues. Included in here are:
- binder driver fixes
- fsi MODULE_DESCRIPTION() additions (people seem to love them...)
- eeprom driver fix
- Kconfig dependency fix to resolve build issues
- spmi driver fixes
All of these have been in linux-next for a while with no reported
problems"
* tag 'char-misc-6.11-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc:
spmi: pmic-arb: add missing newline in dev_err format strings
spmi: pmic-arb: Pass the correct of_node to irq_domain_add_tree
binder_alloc: Fix sleeping function called from invalid context
binder: fix descriptor lookup for context manager
char: add missing NetWinder MODULE_DESCRIPTION() macros
misc: mrvl-cn10k-dpi: add PCI_IOV dependency
eeprom: ee1004: Fix locking issues in ee1004_probe()
fsi: add missing MODULE_DESCRIPTION() macros
Pull SCSI fixes from James Bottomley:
"Two core fixes: one to prevent discard type changes (seen on iSCSI)
during intermittent errors and the other is fixing a lockdep problem
caused by the queue limits change.
And one driver fix in ufs"
* tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi:
scsi: sd: Keep the discard mode stable
scsi: sd: Move sd_read_cpr() out of the q->limits_lock region
scsi: ufs: core: Fix hba->last_dme_cmd_tstamp timestamp updating logic
Pull nfsd fixes from Chuck Lever:
- Two minor fixes for recent changes
* tag 'nfsd-6.11-1' of git://git.kernel.org/pub/scm/linux/kernel/git/cel/linux:
nfsd: don't set SVC_SOCK_ANONYMOUS when creating nfsd sockets
sunrpc: avoid -Wformat-security warning
Pull i2c fixes from Wolfram Sang:
- Two fixes for SMBusAlert handling in the I2C core: one to avoid an
endless loop when scanning for handlers and one to make sure handlers
are always called even if HW has broken behaviour
- I2C header build fix for when ACPI is enabled but I2C isn't
- The testunit gets a rename in the code to match the documentation
- Two fixes for the Qualcomm GENI I2C controller are cleaning up the
error exit patch in the runtime_resume() function. The first is
disabling the clock, the second disables the icc on the way out
* tag 'i2c-for-6.11-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux:
i2c: testunit: match HostNotify test name with docs
i2c: qcom-geni: Add missing geni_icc_disable in geni_i2c_runtime_resume
i2c: qcom-geni: Add missing clk_disable_unprepare in geni_i2c_runtime_resume
i2c: Fix conditional for substituting empty ACPI functions
i2c: smbus: Send alert notifications to all devices if source not found
i2c: smbus: Improve handling of stuck alerts
Pull dma-mapping fix from Christoph Hellwig:
- avoid a deadlock with dma-debug and netconsole (Rik van Riel)
* tag 'dma-mapping-6.11-2024-08-10' of git://git.infradead.org/users/hch/dma-mapping:
dma-debug: avoid deadlock between dma debug vs printk and netconsole
Pull more bcachefs fixes from Kent Overstreet:
"A couple last minute fixes for the new disk accounting
- fix a bug that was causing ACLs to seemingly "disappear"
- new on disk format version, bcachefs_metadata_version_disk_accounting_v3
bcachefs_metadata_version_disk_accounting_v2 accidentally included
padding in disk_accounting_key; fortunately, 6.11 isn't out yet so
we can fix this with another version bump"
* tag 'bcachefs-2024-08-10' of git://evilpiepirate.org/bcachefs:
bcachefs: bcachefs_metadata_version_disk_accounting_v3
bcachefs: improve bch2_dev_usage_to_text()
bcachefs: bch2_accounting_invalid()
bcachefs: Switch to .get_inode_acl()
The section 4.5.2 of the RISC-V AIA specification says that "any write
to a sourcecfg register of an APLIC might (or might not) cause the
corresponding interrupt-pending bit to be set to one if the rectified
input value is high (= 1) under the new source mode."
When the interrupt type is changed in the sourcecfg register, the APLIC
device might not set the corresponding pending bit, so the interrupt might
never become pending.
To handle sourcecfg register changes for level-triggered interrupts in MSI
mode, manually set the pending bit for retriggering interrupt so it gets
retriggered if it was already asserted.
Fixes: ca8df97fe6 ("irqchip/riscv-aplic: Add support for MSI-mode")
Signed-off-by: Yong-Xuan Wang <yongxuan.wang@sifive.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Vincent Chen <vincent.chen@sifive.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/all/20240809071049.2454-1-yongxuan.wang@sifive.com
The device tree property 'xlnx,kind-of-intr' is sanity checked that the
bitmask contains only set bits which are in the range of the number of
interrupts supported by the controller.
The check is done by shifting the mask right by the number of supported
interrupts and checking the result for zero.
The data type of the mask is u32 and the number of supported interrupts is
up to 32. In case of 32 interrupts the shift is out of bounds, resulting in
a mismatch warning. The out of bounds condition is also reported by UBSAN:
UBSAN: shift-out-of-bounds in irq-xilinx-intc.c:332:22
shift exponent 32 is too large for 32-bit type 'unsigned int'
Fix it by promoting the mask to u64 for the test.
Fixes: d50466c907 ("microblaze: intc: Refactor DT sanity check")
Signed-off-by: Radhey Shyam Pandey <radhey.shyam.pandey@amd.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/all/1723186944-3571957-1-git-send-email-radhey.shyam.pandey@amd.com
Pull smb client fixes from Steve French:
- DFS fix
- fix for security flags for requiring encryption
- minor cleanup
* tag '6.11-rc2-smb3-client-fixes' of git://git.samba.org/sfrench/cifs-2.6:
cifs: cifs_inval_name_dfs_link_error: correct the check for fullpath
Fix spelling errors in Server Message Block
smb3: fix setting SecurityFlags when encryption is required
Pull spi fixes from Mark Brown:
"A few SPI fixes: clock rate calculation fixes for the Kunpeng and lpsi
drivers and a missing registration of a device ID for spidev (which
had only been updated for DT cases, causing warnings)"
* tag 'spi-fix-v6.11-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi:
spi: spi-fsl-lpspi: Fix scldiv calculation
spi: spidev: Add missing spi_device_id for bh2228fv
spi: hisi-kunpeng: Add verification for the max_frequency provided by the firmware
spi: hisi-kunpeng: Add validation for the minimum value of speed_hz
bcachefs_metadata_version_disk_accounting_v2 erroneously had padding
bytes in disk_accounting_key, which is a problem because we have to
guarantee that all unused bytes in disk_accounting_key are zeroed.
Fortunately 6.11 isn't out yet, so it's cheap to fix this by spinning a
new version.
Reported-by: Gabriel de Perthuis <g2p.code@gmail.com>
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
Pull drm fixes from Dave Airlie:
"Weekly regular fixes, mostly amdgpu with i915/xe having a few each,
and then some misc bits across the board, seems about right for rc3
time.
client:
- fix null ptr deref
bridge:
- connector: fix double free
atomic:
- fix async flip update
panel:
- document panel
omap:
- add config dependency
tests:
- fix gem shmem test
drm buddy:
- Add start address to trim function
amdgpu:
- DMCUB fix
- Fix DET programming on some DCNs
- DCC fixes
- DCN 4.0.1 fixes
- SMU 14.0.x update
- MMHUB fix
- DCN 3.1.4 fix
- GC 12.0 fixes
- Fix soft recovery error propogation
- SDMA 7.0 fixes
- DSC fix
xe:
- Fix off-by-one when processing RTP rules
- Use dma_fence_chain_free in chain fence unused as a sync
- Fix PL1 disable flow in xe_hwmon_power_max_write
- Take ref to VM in delayed dump snapshot
i915:
- correct dual pps handling for MTL_PCH+ [display]
- Adjust vma offset for framebuffer mmap offset [gem]
- Fix Virtual Memory mapping boundaries calculation [gem]
- Allow evicting to use the requested placement
- Attempt to get pages without eviction first"
* tag 'drm-fixes-2024-08-10' of https://gitlab.freedesktop.org/drm/kernel: (31 commits)
drm/xe: Take ref to VM in delayed snapshot
drm/xe/hwmon: Fix PL1 disable flow in xe_hwmon_power_max_write
drm/xe: Use dma_fence_chain_free in chain fence unused as a sync
drm/xe/rtp: Fix off-by-one when processing rules
drm/amdgpu: Add DCC GFX12 flag to enable address alignment
drm/amdgpu: correct sdma7 max dw
drm/amdgpu: Add address alignment support to DCC buffers
drm/amd/display: Skip Recompute DSC Params if no Stream on Link
drm/amdgpu: change non-dcc buffer copy configuration
drm/amdgpu: Forward soft recovery errors to userspace
drm/amdgpu: add golden setting for gc v12
drm/buddy: Add start address support to trim function
drm/amd/display: Add missing program DET segment call to pipe init
drm/amd/display: Add missing DCN314 to the DML Makefile
drm/amdgpu: force to use legacy inv in mmhub
drm/amd/pm: update powerplay structure on smu v14.0.2/3
drm/amd/display: Add missing mcache registers
drm/amd/display: Add dcc propagation value
drm/amd/display: Add missing DET segments programming
drm/amd/display: Replace dm_execute_dmub_cmd with dc_wake_and_execute_dmub_cmd
...
Implement bch2_accounting_invalid(); check for junk at the end, and
replicas accounting entries in particular need to be checked or we'll
pop asserts later.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
Pull cpumask fix from Yury Norov:
"Fix for cpumask merge"
[ Mea culpa, this was my mismerge due to too much cut-and-paste - Linus ]
* tag 'bitmap-6.11-rc' of https://github.com/norov/linux:
cpumask: Fix crash on updating CPU enabled mask
Pull power management fix from Rafael Wysocki:
"Change the default EPP (energy-performence preference) value for the
Emerald Rapids processor in the intel_pstate driver.
Thisshould improve both the performance and energy efficiency (Pedro
Henrique Kopper)"
* tag 'pm-6.11-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
cpufreq: intel_pstate: Update Balance performance EPP for Emerald Rapids
Pull asm-generic fixes from Arnd Bergmann:
"There are two more changes to the syscall.tbl conversion: the
'__NR_newfstat' in the previous bugfix was a mistake and gets reverted
now, after triple-checking that the contents are now back to what they
were on all architectures. The __NR_nfsservctl definition is not
really needed but came up in the same discussion as it had previously
been defined in uapi/asm-generic/unistd.h and tested for in user
space.
There are a few more symbols that used to be defined in the old
unistd.h file, but that are never defined on any other architecture
using syscall.tbl format. These used to be needed inside of the
kernel:
__NR_syscalls
__NR_arch_specific_syscall
__NR3264_*
Searching for these on https://codesearch.debian.net/ shows a few
packages (rustc, golang, clamav, libseccomp, librsvg, strace) that
duplicate all the macros from asm/unistd.h, but nothing that actually
uses the macros, so I concluded that they are fine to omit after all"
* tag 'asm-generic-fixes-6.11-2' of git://git.kernel.org/pub/scm/linux/kernel/git/arnd/asm-generic:
syscalls: add back legacy __NR_nfsservctl macro
syscalls: fix fstat() entry again
Pull ARM SoC fixes from Arnd Bergmann:
"There are three sets of patches for the soc tree:
- Marek Behún addresses multiple build time regressions caused by
changes to the cznic turris-omnia support
- Dmitry Torokhov fixes a regression in the legacy "gumstix" board
code he cleaned up earlier
- The TI K3 maintainers found multiple bugs in the in gpio, audio and
pcie devicetree nodes"
* tag 'arm-fixes-6.11-1' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc:
ARM: pxa/gumstix: fix attaching properties to vbus gpio device
doc: platform: cznic: turris-omnia-mcu: Use double backticks for attribute value
doc: platform: cznic: turris-omnia-mcu: Fix sphinx-build warning
platform: cznic: turris-omnia-mcu: Make GPIO code optional
platform: cznic: turris-omnia-mcu: Make poweroff and wakeup code optional
platform: cznic: turris-omnia-mcu: Make TRNG code optional
platform: cznic: turris-omnia-mcu: Make watchdog code optional
arm64: dts: ti: k3-j784s4-main: Correct McASP DMAs
arm64: dts: ti: k3-j722s: Fix gpio-range for main_pmx0
arm64: dts: ti: k3-am62p: Fix gpio-range for main_pmx0
arm64: dts: ti: k3-am62p: Add gpio-ranges for mcu_gpio0
arm64: dts: ti: k3-am62-verdin-dahlia: Keep CTRL_SLEEP_MOCI# regulator on
arm64: dts: ti: k3-j784s4-evm: Consolidate serdes0 references
arm64: dts: ti: k3-j784s4-evm: Assign only lanes 0 and 1 to PCIe1
Pull kprobe fixes from Masami Hiramatsu:
- Fix misusing str_has_prefix() parameter order to check symbol prefix
correctly
- bpf: remove unused declaring of bpf_kprobe_override
* tag 'probes-fixes-v6.11-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace:
kprobes: Fix to check symbol prefixes correctly
bpf: kprobe: remove unused declaring of bpf_kprobe_override
Pull block fixes from Jens Axboe:
"Just a set of cleanups for blk-throttle and nvme structures"
* tag 'block-6.11-20240809' of git://git.kernel.dk/linux:
nvme: reorganize nvme_ns_head fields
nvme: change data type of lba_shift
nvme: remove a field from nvme_ns_head
nvme: remove unused parameter
blk-throttle: remove more latency dead-code
Pull io_uring fixes from Jens Axboe:
"Nothing major in here, just two fixes for ensuring that bundle
recv/send requests always get marked for cleanups, and a single fix to
ensure that sends with provided buffers only pick a single buffer
unless the bundle option has been enabled"
* tag 'io_uring-6.11-20240809' of git://git.kernel.dk/linux:
io_uring/net: don't pick multiple buffers for non-bundle send
io_uring/net: ensure expanded bundle send gets marked for cleanup
io_uring/net: ensure expanded bundle recv gets marked for cleanup
Pull sound fixes from Takashi Iwai:
"A collection of lots of small changes, almost all device-specific:
- A series of fixes for ASoC Qualcomm stuff
- Various fixes for Cirrus ASoC and HD-audio codecs
- A few AMD ASoC quirks and usual HD-audio quirks
- Other misc fixes, including a long-time regression in USB-audio"
* tag 'sound-6.11-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: (39 commits)
ASoC: cs35l56: Patch CS35L56_IRQ1_MASK_18 to the default value
ASoC: meson: axg-fifo: fix irq scheduling issue with PREEMPT_RT
MAINTAINERS: Update Cirrus Logic parts to linux-sound mailing list
ASoC: dt-bindings: qcom,wcd939x: Correct reset GPIO polarity in example
ASoC: dt-bindings: qcom,wcd938x: Correct reset GPIO polarity in example
ASoC: dt-bindings: qcom,wcd934x: Correct reset GPIO polarity in example
ASoC: dt-bindings: qcom,wcd937x: Correct reset GPIO polarity in example
ASoC: amd: yc: Add quirk entry for OMEN by HP Gaming Laptop 16-n0xxx
ASoC: codecs: ES8326: button detect issue
ASoC: amd: yc: Support mic on Lenovo Thinkpad E14 Gen 6
ALSA: usb-audio: Re-add ScratchAmp quirk entries
ALSA: hda/realtek: Add Framework Laptop 13 (Intel Core Ultra) to quirks
ALSA: hda/hdmi: Yet more pin fix for HP EliteDesk 800 G4
ALSA: hda: Add HP MP9 G4 Retail System AMS to force connect list
ASoC: cs35l56: Handle OTP read latency over SoundWire
ASoC: codecs: lpass-macro: fix missing codec version
ALSA: line6: Fix racy access to midibuf
ASoC: cs-amp-lib: Fix NULL pointer crash if efi.get_variable is NULL
ASoC: cs35l56: Stop creating ALSA controls for firmware coefficients
ASoC: wm_adsp: Add control_add callback and export wm_adsp_control_add()
...
The recursive aes-arm-bs module load situation reported by Russell King
is getting fixed in the crypto layer, but this in the meantime fixes the
"recursive load hangs forever" by just making the waiting for the first
module load be interruptible.
This should now match the old behavior before commit 9b9879fc03
("modules: catch concurrent module loads, treat them as idempotent"),
which used the different "wait for module to be ready" code in
module_patient_check_exists().
End result: a recursive module load will still block, but now a signal
will interrupt it and fail the second module load, at which point the
first module will successfully complete loading.
Fixes: 9b9879fc03 ("modules: catch concurrent module loads, treat them as idempotent")
Cc: Russell King <linux@armlinux.org.uk>
Cc: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Two fixes on the Qualcomm GENI I2C controller are cleaning up the
error exit patch in the runtime_resume() function. The first is
disabling the clock, the second disables the icc on the way out.
ASoC: Fixes for v6.11
Quite a lot of fixes have come in since the merge window, there's some
repetitive fixes over the Qualcomm drivers increasing the patch count,
along with a large batch of fixes from Cirrus. We also have some quirks
and some individual fixes.
Replace the always-true check tcon->origin_fullpath with
check of server->leaf_fullpath
See https://bugzilla.kernel.org/show_bug.cgi?id=219083
The check of the new @tcon will always be true during mounting,
since @tcon->origin_fullpath will only be set after the tree is
connected to the latest common resource, as well as checking if
the prefix paths from it are fully accessible.
Fixes: 3ae872de41 ("smb: client: fix shared DFS root mounts with different prefixes")
Reviewed-by: Paulo Alcantara (Red Hat) <pc@manguebit.com>
Signed-off-by: Gleb Korobeynikov <gkorobeynikov@astralinux.ru>
Signed-off-by: Steve French <stfrench@microsoft.com>
Pull networking fixes from Jakub Kicinski:
"Including fixes from bluetooth.
Current release - regressions:
- eth: bnxt_en: fix memory out-of-bounds in bnxt_fill_hw_rss_tbl() on
older chips
Current release - new code bugs:
- ethtool: fix off-by-one error / kdoc contradicting the code for max
RSS context IDs
- Bluetooth: hci_qca:
- QCA6390: fix support on non-DT platforms
- QCA6390: don't call pwrseq_power_off() twice
- fix a NULL-pointer derefence at shutdown
- eth: ice: fix incorrect assigns of FEC counters
Previous releases - regressions:
- mptcp: fix handling endpoints with both 'signal' and 'subflow'
flags set
- virtio-net: fix changing ring count when vq IRQ coalescing not
supported
- eth: gve: fix use of netif_carrier_ok() during reconfig / reset
Previous releases - always broken:
- eth: idpf: fix bugs in queue re-allocation on reconfig / reset
- ethtool: fix context creation with no parameters
Misc:
- linkwatch: use system_unbound_wq to ease RTNL contention"
* tag 'net-6.11-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (41 commits)
net: dsa: microchip: disable EEE for KSZ8567/KSZ9567/KSZ9896/KSZ9897.
ethtool: Fix context creation with no parameters
net: ethtool: fix off-by-one error in max RSS context IDs
net: pse-pd: tps23881: include missing bitfield.h header
net: fec: Stop PPS on driver remove
net: bcmgenet: Properly overlay PHY and MAC Wake-on-LAN capabilities
l2tp: fix lockdep splat
net: stmmac: dwmac4: fix PCS duplex mode decode
idpf: fix UAFs when destroying the queues
idpf: fix memleak in vport interrupt configuration
idpf: fix memory leaks and crashes while performing a soft reset
bnxt_en : Fix memory out-of-bounds in bnxt_fill_hw_rss_tbl()
net: dsa: bcm_sf2: Fix a possible memory leak in bcm_sf2_mdio_register()
net/smc: add the max value of fallback reason count
Bluetooth: hci_sync: avoid dup filtering when passive scanning with adv monitor
Bluetooth: l2cap: always unlock channel in l2cap_conless_channel()
Bluetooth: hci_qca: fix a NULL-pointer derefence at shutdown
Bluetooth: hci_qca: fix QCA6390 support on non-DT platforms
Bluetooth: hci_qca: don't call pwrseq_power_off() twice for QCA6390
ice: Fix incorrect assigns of FEC counts
...
Tina Zhang
Lu Baolu
Sanjay K Kumar
Linus Torvalds
Yong-Xuan Wang
Radhey Shyam Pandey
Kent Overstreet
Wolfram Sang
Takashi Iwai
Dave Airlie
Gleb Korobeynikov