[ Upstream commit ca1afd88f5 ]
ocfs2_trim_mainbm() trims the global bitmap in cluster units, but its
too-short range validation only checks sb->s_blocksize.
On filesystems with a cluster size larger than the block size, a FITRIM
range that is at least one block but shorter than one cluster is accepted
and shifted down to len == 0. The later start + len - 1 and len -= ...
arithmetic then underflows and can drive trimming past the requested
range.
Reject ranges shorter than s_clustersize instead. That preserves the
existing -EINVAL behavior for requests that cannot discard even one
allocation unit and keeps zero-cluster trims out of the group walk.
Link: https://lore.kernel.org/20260528151247.361854-1-rollkingzzc@gmail.com
Fixes: aa89762c54 ("ocfs2: return EINVAL if the given range to discard is less than block size")
Assisted-by: Codex:gpt-5.5
Signed-off-by: Zhang Cen <rollkingzzc@gmail.com>
Reviewed-by: Joseph Qi <joseph.qi@linux.alibaba.com>
Cc: Mark Fasheh <mark@fasheh.com>
Cc: Joel Becker <jlbec@evilplan.org>
Cc: Junxiao Bi <junxiao.bi@oracle.com>
Cc: Changwei Ge <gechangwei@live.cn>
Cc: Jun Piao <piaojun@huawei.com>
Cc: Heming Zhao <heming.zhao@suse.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 93612d48fa ]
The locking_state debugfs iterator snapshots struct ocfs2_lock_res by
value under ocfs2_dlm_tracking_lock and later formats that copy in
ocfs2_dlm_seq_show(). That is fine for the inline fields, but the
userspace fsdlm stack stores the LVB through lksb_fsdlm.sb_lvbptr. Once
the iterator drops the tracking lock, a copied non-NULL sb_lvbptr still
points into the original lockres owner, so teardown can free that
container before the debugfs dump walks the raw LVB bytes.
Rebase the copied sb_lvbptr to the copied l_lksb before dumping the raw
LVB. The seq snapshot already carries the inline LVB storage reserved in
struct ocfs2_dlm_lksb, so the debugfs reader can dump the copied bytes
without borrowing the original lockres lifetime.
The buggy scenario involves two paths, with each column showing the order
within that path:
locking_state reader: lockres teardown:
1. ocfs2_dlm_seq_start()/next() 1. file release or another owner
copies struct ocfs2_lock_res teardown reaches
2. ocfs2_dlm_seq_show() formats ocfs2_lock_res_free()
the copied row 2. the lockres is removed from the
3. ocfs2_dlm_lvb() follows the tracking list
copied sb_lvbptr 3. the owner frees the original
lockres container
Validation reproduced this kernel report:
KASAN slab-use-after-free in ocfs2_dlm_seq_show+0x1bd/0x430
RIP: 0033:0x7f8ec4b1e29d
The buggy address belongs to the object at ffff88810a1e0800 which belongs
to the cache kmalloc-1k of size 1024
The buggy address is located 368 bytes inside of freed 1024-byte region
[ffff88810a1e0800, ffff88810a1e0c00)
Read of size 1
Call trace:
dump_stack_lvl+0x66/0xa0
print_report+0xce/0x630
ocfs2_dlm_seq_show+0x1bd/0x430 (fs/ocfs2/dlmglue.c:3137)
srso_alias_return_thunk+0x5/0xfbef5
__virt_addr_valid+0x19f/0x330
kasan_report+0xe0/0x110
seq_read_iter+0x29d/0x790
seq_read+0x20a/0x280
find_held_lock+0x2b/0x80
rcu_read_unlock+0x18/0x70
full_proxy_read+0x9e/0xd0
vfs_read+0x12c/0x590
ksys_read+0xd2/0x170
do_user_addr_fault+0x65a/0x890
do_syscall_64+0x115/0x6a0 (arch/x86/entry/syscall_64.c:87)
entry_SYSCALL_64_after_hwframe+0x77/0x7f
Allocated by task stack:
kasan_save_stack+0x33/0x60
kasan_save_track+0x14/0x30
__kasan_kmalloc+0xaa/0xb0
ocfs2_file_open+0x13e/0x300
do_dentry_open+0x233/0x7f0
vfs_open+0x5a/0x1b0
path_openat+0x66d/0x1540
do_file_open+0x186/0x2b0
do_sys_openat2+0xce/0x150
__x64_sys_openat+0xd0/0x140
do_syscall_64+0x115/0x6a0 (arch/x86/entry/syscall_64.c:87)
entry_SYSCALL_64_after_hwframe+0x77/0x7f
Freed by task stack:
kasan_save_stack+0x33/0x60
kasan_save_track+0x14/0x30
kasan_save_free_info+0x3b/0x60
__kasan_slab_free+0x5f/0x80
kfree+0x313/0x590
ocfs2_file_release+0x138/0x260
__fput+0x1df/0x4b0
fput_close_sync+0xd2/0x170
__x64_sys_close+0x55/0x90
do_syscall_64+0x115/0x6a0 (arch/x86/entry/syscall_64.c:87)
entry_SYSCALL_64_after_hwframe+0x77/0x7f
Link: https://lore.kernel.org/20260525041726.4112882-1-rollkingzzc@gmail.com
Fixes: cf4d8d75d8 ("ocfs2: add fsdlm to stackglue")
Assisted-by: Codex:gpt-5.5
Signed-off-by: Zhang Cen <rollkingzzc@gmail.com>
Reviewed-by: Joseph Qi <joseph.qi@linux.alibaba.com>
Cc: Mark Fasheh <mark@fasheh.com>
Cc: Joel Becker <jlbec@evilplan.org>
Cc: Junxiao Bi <junxiao.bi@oracle.com>
Cc: Changwei Ge <gechangwei@live.cn>
Cc: Jun Piao <piaojun@huawei.com>
Cc: Heming Zhao <heming.zhao@suse.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 73a4c02f94 ]
Commit df4d29732f ("perf/x86/amd: Change/fix NMI latency mitigation
to use a timestamp") fixed handling of late-arriving NMIs but limited
the mitigation to processors having X86_FEATURE_PERFCTR_CORE. However,
it is unclear if processors without this feature are also affected.
When Mediated vPMU is enabled on affected hardware, it is also possible
to bypass the fix inside KVM guests if X86_FEATURE_PERFCTR_CORE is
removed from the guest CPUID (e.g. using "-cpu host,-perfctr-core" with
QEMU). Hence, use the mitigation at all times.
Fixes: df4d29732f ("perf/x86/amd: Change/fix NMI latency mitigation to use a timestamp")
Signed-off-by: Sandipan Das <sandipan.das@amd.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://patch.msgid.link/29a3c970da289ab8f24282933bdb36545c0403e8.1780325517.git.sandipan.das@amd.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 8a7f2bff21 ]
bpf_prog_query() returns a negative errno on failure.
query_flow_dissector() currently closes the namespace fd and then reads
errno to decide whether -EINVAL means that the running kernel does not
support flow dissector queries.
That errno check controls behavior, not just diagnostics: -EINVAL is
handled as a non-fatal old-kernel case, while any other error makes bpftool
net fail.
The namespace fd is opened read-only, so close() is not expected to
commonly fail in normal use. Still, the BPF_PROG_QUERY error is already
available in err, and reading errno after an intervening close() is
fragile. If close() does change errno, the compatibility branch may be
based on close()'s error instead of the BPF_PROG_QUERY result.
This was reproduced with an LD_PRELOAD fault injector that forced
BPF_PROG_QUERY for BPF_FLOW_DISSECTOR to fail with EINVAL and then
forced close() on the netns fd to fail with EIO. The unpatched bpftool
reported "can't query prog: Input/output error". With this change, the
same injected failure is handled as the intended non-fatal EINVAL
compatibility case.
Use the libbpf-returned error code instead. Keep the existing errno reset
in the non-fatal path to preserve batch mode behavior. The success path
is unchanged.
Fixes: 7f0c57fec8 ("bpftool: show flow_dissector attachment status")
Signed-off-by: Woojin Ji <random6.xyz@gmail.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: Leon Hwang <leon.hwang@linux.dev>
Acked-by: Yonghong Song <yonghong.song@linux.dev>
Acked-by: Quentin Monnet <qmo@kernel.org>
Link: https://lore.kernel.org/bpf/20260603003339.33791-1-random6.xyz@gmail.com
Assisted-by: ChatGPT:gpt-5.5
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit baa286df5f ]
The mca ras sub-blocks (mp0, mp1, mpio) all share the
AMDGPU_RAS_BLOCK__MCA block id and are distinguished only by
sub_block_index. The ras manager object for an mca block is selected
with:
con->objs[AMDGPU_RAS_BLOCK__LAST + head->sub_block_index]
Since the rework in commit 7f544c5488 ("drm/amdgpu: Rework mca ras
sw_init") moved the ras_comm setup into amdgpu_mca_mp*_ras_sw_init() but
left sub_block_index unset, mp0/mp1/mpio all default to index 0 and
collide on the same object slot. mp0 grabs the slot and creates its
sysfs node first; mp1 (and mpio) then find the slot already in use, so
amdgpu_ras_block_late_init() -> amdgpu_ras_sysfs_create() returns
-EINVAL:
amdgpu: mca.mp1 failed to execute ras_block_late_init_default! ret:-22
amdgpu: amdgpu_ras_late_init failed -22
amdgpu: amdgpu_device_ip_late_init failed
amdgpu: Fatal error during GPU init
The error is currently masked because amdgpu_ras_late_init() does not
check the return value of amdgpu_ras_block_late_init_default(), but it
already leaves mp1/mpio without their sysfs nodes and becomes a fatal
init failure as soon as that return value is honored.
Restore the per-sub-block sub_block_index assignment so each mca
sub-block maps to its own object slot.
Fixes: 7f544c5488 ("drm/amdgpu: Rework mca ras sw_init")
Signed-off-by: Yunxiang Li <Yunxiang.Li@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 10da12d352 ]
Normally ->s_dentry is cleared when dentry it's pointing to becomes
negative (on eviction, realistically). However, that only happens
if dentry gets to be positive in the first place; in case of inode
allocation failure dentry never becomes positive, so ->d_iput()
is not called at all.
We do part of what normally would've been done by configfs_d_iput()
(dropping the reference to configfs_dirent) manually, but we do
not clear ->s_dentry there. Sloppy as it is, it does not matter in
case of configfs_create_{dir,link}() - there configfs_dirent does
not survive dropping the sole reference to it.
However, for configfs_lookup() it *does* survive, with a dangling
pointer to soon to be freed dentry sitting it its ->s_dentry.
Subsequent getdents(2) in that directory will end up dereferencing
that pointer in order to pick the inode number. Use after free...
This is the minimal fix; the right approach is to set the linkage
between dentry and configfs_dirent only after we know that we have
an inode, but that takes more surgery and the bug had been there
since 2006, so...
Fixes: 3d0f89bb16 ("configfs: Add permission and ownership to configfs objects") # 2.6.16-rc3
Reviewed-by: Jan Kara <jack@suse.cz>
Reviewed-by: Breno Leitao <leitao@debian.org>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 63c1a12bc0 ]
Commit ed4fb6d7ef ("hrtimer: Use and report correct timerslack values
for realtime tasks") sets timer_slack_ns to 0 for RT tasks in
__setscheduler_params(). However, when an RT task with SCHED_RESET_ON_FORK
creates child threads, the children inherit timer_slack_ns=0 from the
parent. sched_fork() resets the child's policy to SCHED_NORMAL but does
not restore timer_slack_ns, leaving the child permanently running with
zero slack.
Fix this by restoring timer_slack_ns from default_timer_slack_ns in
sched_fork() when resetting from RT/DL to NORMAL policy, matching the
existing behavior in __setscheduler_params().
Note: this fix alone requires a correct default_timer_slack_ns to be
effective. See the following patch for that fix.
Fixes: ed4fb6d7ef ("hrtimer: Use and report correct timerslack values for realtime tasks")
Reported-by: Qiaoting.Lin <linqiaoting@xiaomi.com>
Signed-off-by: Guanyou.Chen <chenguanyou@xiaomi.com>
Signed-off-by: Chunhui.Li <chunhui.li@mediatek.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://patch.msgid.link/20260522131000.1664983-2-chenguanyou@xiaomi.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit a4659be0bc ]
Fix ext2_dio_write_iter() to propagate the error returned by
generic_write_sync() instead of silently discarding it, which could
cause write(2) to return success to userspace on O_SYNC/O_DSYNC files
even when the sync failed.
The correct pattern, already used in ext2_dax_write_iter() in the same
file and in ext4, xfs, f2fs among others, is:
if (ret > 0)
ret = generic_write_sync(iocb, ret);
Found by Linux Verification Center (linuxtesting.org) with SVACE.
[JK: Reflect also filemap_write_and_wait() return value]
Fixes: fb5de4358e ("ext2: Move direct-io to use iomap")
Signed-off-by: Danila Chernetsov <listdansp@mail.ru>
Link: https://patch.msgid.link/20260530122311.136803-1-listdansp@mail.ru
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 3a3fc1dfd6 ]
When splitting NUMA node uniformly, split_nodes_size_interleave_uniform()
returns the next absolute node ID, not the number of nodes created.
The existing under-allocation detection logic compares next absolute node
ID (ret) and request count (n), which only works when nid starts at 0.
For example, on a system with 2 physical NUMA nodes (node 0: 2GB, node
1: 128MB) and numa=fake=8U, 8 fake nodes are successfully created from
node 0 and split_nodes_size_interleave_uniform() returns 8. For node 1,
fake node nid starts at 8, but only 4 fake nodes are created due to
current FAKE_NODE_MIN_SIZE being 32MB, and
split_nodes_size_interleave_uniform() returns 12. By existing
under-allocation detection logic, "ret < n" (12 < 8) is false, so the
under-allocation will not be detected.
Fix under-allocation detection logic to compare the number of actually
created nodes (ret - nid) against the request count (n). Also skip
under-allocation detection logic for memoryless physical nodes where no
fake nodes are created.
Also, fix the outdated comment describing
split_nodes_size_interleave_uniform() to match the actual return value.
Signed-off-by: Sang-Heon Jeon <ekffu200098@gmail.com>
Reported-by: Donghyeon Lee <asd142513@gmail.com>
Reported-by: Munhui Chae <mochae@student.42seoul.kr>
Fixes: cc9aec03e5 ("x86/numa_emulation: Introduce uniform split capability") # 4.19
Link: https://patch.msgid.link/20260417135805.1758378-1-ekffu200098@gmail.com
Signed-off-by: Mike Rapoport (Microsoft) <rppt@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit b93c55b493 ]
commit 4f375ade6a ("bpf: Avoid RCU context warning when unpinning
htab with internal structs") moved inode cleanup from ->free_inode()
into ->destroy_inode() to avoid sleeping in RCU context when calling
bpf_any_put(). However this removed the RCU delay on freeing the
inode itself and the cached symlink body (i_link), both of which
can be accessed by RCU pathwalk (pick_link, may_lookup etc.).
This causes a use-after-free when a concurrent unlinkat() drops the
last inode reference and destroy_inode() frees the inode immediately,
while another task is still walking the path in RCU mode and reads
inode->i_opflags (offset +2) inside current_time() -> is_mgtime().
KASAN reports:
BUG: KASAN: slab-use-after-free in is_mgtime include/linux/fs.h:2313
Read of size 2 at addr ffff8880407e4282 (offset +2 = i_opflags)
The rules (per Al Viro):
->destroy_inode() called immediately, can sleep, use for blocking
cleanup e.g. bpf_any_put()
->free_inode() called after RCU grace period, use for freeing
inode and anything RCU-accessible e.g. i_link
Fix: split the two concerns properly:
- keep bpf_any_put() in bpf_destroy_inode() since it is blocking
and needs to run promptly
- introduce bpf_free_inode() to handle kfree(i_link) and
free_inode_nonrcu() with proper RCU delay, preventing the UAF
Fixes: 4f375ade6a ("bpf: Avoid RCU context warning when unpinning htab with internal structs")
Reported-by: syzbot+36e50496c8ac4bcde3f9@syzkaller.appspotmail.com
Closes: https://syzkaller.appspot.com/bug?extid=36e50496c8ac4bcde3f9
Suggested-by: Al Viro <viro@zeniv.linux.org.uk>
Link: https://lore.kernel.org/all/20260423043906.GN3518998@ZenIV/
Link: https://lore.kernel.org/all/20260602002607.110866-1-kartikey406@gmail.com/T/ [v1]
Signed-off-by: Deepanshu Kartikey <kartikey406@gmail.com>
Acked-by: Al Viro <viro@zeniv.linux.org.uk>
Link: https://lore.kernel.org/r/20260602025249.113828-1-kartikey406@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 2483ae0a56 ]
In ufshcd_transfer_rsp_status(), the default case of the inner switch
statement prints the UPIU response code when an unexpected response is
received. However, the code was printing 'result' variable which is
always 0 at that point, making the error message useless for debugging.
Fix this by printing the actual UPIU response code returned by
ufshcd_get_req_rsp().
Fixes: 08108d3112 ("scsi: ufs: Improve type safety")
Signed-off-by: Chanwoo Lee <cw9316.lee@samsung.com>
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Link: https://patch.msgid.link/20260527092134.275887-1-cw9316.lee@samsung.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 1b6f03b7ae ]
The non_fatal_log_show() function is supposed to return negative error
codes on failure. But because the error codes are saved in a u32 and
then cast to signed long, they end up being high positive values instead
of negative. Remove the intermediary u32 variable to fix this bug.
Fixes: dba2cc03b9 ("scsi: pm80xx: sysfs attribute for non fatal dump")
Signed-off-by: Dan Carpenter <error27@gmail.com>
Acked-by: Jack Wang <jinpu.wang@ionos.com>
Link: https://patch.msgid.link/ahs-bEsBJH0KhnsX@stanley.mountain
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 8d4b989d9c ]
BTT lanes serialize access to per-lane metadata and workspace state
during BTT I/O. The btt-check unit test reports data mismatches during
BTT writes due to a race in lane acquisition that can lead to silent
data corruption.
The existing lane model uses a spinlock together with a per-CPU
recursion count. That recursion model stopped being valid after BTT
lanes became preemptible: another task can run on the same CPU,
observe a non-zero recursion count, bypass locking, and use the same
lane concurrently.
BTT lanes are also held across arena_write_bytes() calls. That path
reaches nsio_rw_bytes(), which flushes writes with nvdimm_flush().
Some provider flush callbacks can sleep, making a spinlock the wrong
primitive for the lane lifetime.
Replace the spinlock-based recursion model with a dynamically
allocated per-lane mutex array and take the lane lock
unconditionally.
Add might_sleep() to catch any future atomic-context caller.
Found with the ndctl unit test btt-check.sh.
Fixes: 36c75ce3bd ("nd_btt: Make BTT lanes preemptible")
Assisted-by: Claude-Sonnet:4.5
Tested-by: Aboorva Devarajan <aboorvad@linux.ibm.com>
Reviewed-by: Aboorva Devarajan <aboorvad@linux.ibm.com>
Reviewed-by: Vishal Verma <vishal.l.verma@intel.com>
Reviewed-by: Dave Jiang <dave.jiang@intel.com>
Link: https://patch.msgid.link/20260528021625.618462-1-alison.schofield@intel.com
Signed-off-by: Alison Schofield <alison.schofield@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit ccb4b54b8e ]
mx31_read_cpu_rev() maps the IIM registers with of_iomap() to read the
silicon revision, but returns without unmapping the MMIO mapping.
Keep the normalized revision value in a local variable and route the
return path through iounmap() after the revision register has been read.
Fixes: 3172225d45 ("ARM: imx31: Retrieve the IIM base address from devicetree")
Signed-off-by: Yuho Choi <dbgh9129@gmail.com>
Signed-off-by: Frank Li <Frank.Li@nxp.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit aa0ae1c35f ]
Some but not all ata_exec_internal() calls happen from the context of
the ATA error handler. Commit c0c362b60e ("libata: implement cross-port
EH exclusion") added ata_eh_release() and ata_eh_acquire() calls in
ata_exec_internal(). Calling these functions is necessary if the caller
holds the eh_mutex but is not allowed if the caller doesn't hold that
mutex. Fix this by only calling ata_eh_release() and ata_eh_acquire() if
the caller holds the eh_mutex. An example of an indirect caller of
ata_exec_internal() that does not hold the eh_mutex is
ata_host_register().
Fixes: c0c362b60e ("libata: implement cross-port EH exclusion")
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Reviewed-by: Niklas Cassel <cassel@kernel.org>
Reviewed-by: Damien Le Moal <dlemoal@kernel.org>
Reviewed-by: Hannes Reinecke <hare@kernel.org>
Signed-off-by: Niklas Cassel <cassel@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 12b7731995 ]
Some tab characters snuck into the data layout table for turntable
extensions, which resulted in the table only looking right at a tabstop
of 4, which is uncommon in the kernel. Change them to the equivalent
amount of spaces, which should look correct in any editor.
While at it, also fix the other whitespace errors (trailing spaces at
end of line) introduced in the same commit.
Fixes: 05086f3db5 ("HID: wiimote: Add support for the DJ Hero turntable")
Reviewed-by: David Rheinsberg <david@readahead.eu>
Signed-off-by: J. Neuschäfer <j.ne@posteo.net>
Signed-off-by: Benjamin Tissoires <bentiss@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 36d46348eb ]
of_find_compatible_node() returns a referenced device node. The i.MX31
and i.MX35 early init paths use the node to map the CCM registers with
of_iomap(), but never drop the node reference.
Release the node after the mapping is created.
Fixes: 2cf98d1295 ("ARM: imx3: Retrieve the CCM base address from devicetree")
Signed-off-by: Yuho Choi <dbgh9129@gmail.com>
Signed-off-by: Frank Li <Frank.Li@nxp.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit c075827936 ]
RSND_SOC_MASK was defined as (0xFF << 4), spanning bits 4-11. This is
wider than needed since only nibble B (bits 7:4) is used for SoC
identifiers. Narrow it to (0xF << 4) to match the intended single-nibble
allocation and prevent overlap with bits 8-11 which will be used by
upcoming RZ series flags.
No functional change, since the only current user (RSND_SOC_E) fits
within a single nibble.
Fixes: ba164a49f8 ("ASoC: rsnd: src: Avoid a potential deadlock")
Signed-off-by: John Madieu <john.madieu.xa@bp.renesas.com>
Acked-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://patch.msgid.link/20260525110230.4014435-3-john.madieu.xa@bp.renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit d99748ef16 ]
In EXT4_GOING_FLAGS_LOGFLUSH mode, the EXT4_FLAGS_SHUTDOWN flag was set
before calling ext4_force_commit(). This caused ordered-mode data
writeback (triggered by journal commit) to fail with -EIO, since
ext4_do_writepages() checks for the shutdown flag. The journal would
then be aborted prematurely before the commit could succeed.
Fix this by calling ext4_force_commit() first, then setting the
shutdown flag, so that pending data can be written back correctly.
Note that moving ext4_force_commit() before setting the shutdown flag
creates a small window in which new writes may occur and generate new
journal transactions. When the journal is subsequently aborted, the
new transactions will not be able to write to disk. This is intentional
because LOGFLUSH's semantics are to flush pre-existing journal entries
before shutdown, not to guarantee atomicity for writes that race with
the ioctl.
Fixes: 783d948544 ("ext4: add EXT4_IOC_GOINGDOWN ioctl")
Signed-off-by: Zhang Yi <yi.zhang@huawei.com>
Reviewed-by: Baokun Li <libaokun@linux.alibaba.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Link: https://patch.msgid.link/20260424104201.1930823-1-yi.zhang@huaweicloud.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 6b8a26af06 ]
put_all_bios() always drops devs[i].bio, but it only drops
devs[i].repl_bio when r10_bio->read_slot < 0. If discard reuses an
r10bio that was previously used for a read, read_slot can still be
non-negative, and discard cleanup can skip bio_put() on repl_bio.
Reset read_slot to -1 when preparing an r10bio for discard so the
replacement bio is always released correctly.
Fixes: d30588b273 ("md/raid10: improve raid10 discard request")
Signed-off-by: Chen Cheng <chencheng@fnnas.com>
Reviewed-by: Xiao Ni <xiao@kernel.org>
Link: https://patch.msgid.link/20260515093019.3436882-1-chencheng@fnnas.com
Signed-off-by: Yu Kuai <yukuai@fygo.io>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit c53e055028 ]
Encoder HFI capabilities on v6 enforce a 16-pixel step for frame and blur
dimensions, which does not reflect actual hardware requirements and can
reject valid userspace configurations.
Relax the step size to 1 while leaving min/max limits unchanged.
Fixes: 869d77e706 ("media: venus: hfi_plat_v6: Populate capabilities for v6")
Signed-off-by: Renjiang Han <renjiang.han@oss.qualcomm.com>
Reviewed-by: Dikshita Agarwal <dikshita.agarwal@oss.qualcomm.com>
Signed-off-by: Bryan O'Donoghue <bod@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 35428ae3a6 ]
Encoder HFI capabilities on v4 advertise a 16-pixel step for frame and
blur dimensions. This is overly restrictive and can cause userspace caps
negotiation to fail even for valid resolutions.
Relax the advertised step size to 1 and keep alignment enforcement in
buffer layout and size calculations.
Fixes: 8b88cabef4 ("media: venus: hfi_plat_v4: Populate codecs and capabilities for v4")
Signed-off-by: Renjiang Han <renjiang.han@oss.qualcomm.com>
Reviewed-by: Dikshita Agarwal <dikshita.agarwal@oss.qualcomm.com>
Signed-off-by: Bryan O'Donoghue <bod@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit e1c9adabb2 ]
get_framesize_raw_nv12() currently adds SZ_4K to the UV plane size and an
additional SZ_8K to the total buffer size. This inflates the calculated
sizeimage and leads userspace to over-allocate buffers without a clear
requirement.
Remove the extra SZ_4K/SZ_8K padding and compute the NV12 size as the sum
of Y and UV planes, keeping the final ALIGN(size, SZ_4K) intact.
Fixes: e1cb72de70 ("media: venus: helpers: move frame size calculations on common place")
Signed-off-by: Renjiang Han <renjiang.han@oss.qualcomm.com>
Reviewed-by: Dikshita Agarwal <dikshita.agarwal@oss.qualcomm.com>
Signed-off-by: Bryan O'Donoghue <bod@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit d6ab440240 ]
For non-SRQ QPs, the responder reads WQE fields directly from the
shared queue buffer mapped into userspace. This allows a malicious
user to modify fields like num_sge or sge entries while the kernel
is processing the WQE, leading to out-of-bounds reads in
rxe_resp_check_length() and copy_data().
Introduce get_recv_wqe() that validates num_sge and copies the WQE
to a kernel-local buffer before processing, matching the approach
already used for SRQ WQEs in get_srq_wqe(). The srq_wqe buffer is
reused since SRQ and non-SRQ paths are mutually exclusive per QP.
Fixes: 8700e3e7c4 ("Soft RoCE driver")
Link: https://patch.msgid.link/r/20260518215040.1598586-3-tristan@talencesecurity.com
Signed-off-by: Tristan Madani <tristan@talencesecurity.com>
Reviewed-by: Zhu Yanjun <yanjun.zhu@linux.dev>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 22b8fbded6 ]
get_srq_wqe() reads wqe->dma.num_sge from the shared receive queue
buffer, which is mapped into userspace. It validates num_sge against
max_sge, but then re-reads the same field to calculate the memcpy
size. A concurrent userspace thread can modify num_sge between
validation and use, causing a heap buffer overflow when copying the
WQE into qp->resp.srq_wqe.
Read num_sge into a local variable and use it for both the bounds
check and the size calculation.
Fixes: 8700e3e7c4 ("Soft RoCE driver")
Link: https://patch.msgid.link/r/20260518215040.1598586-2-tristan@talencesecurity.com
Signed-off-by: Tristan Madani <tristan@talencesecurity.com>
Reviewed-by: Zhu Yanjun <yanjun.zhu@linux.dev>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit c63ed6e1f5 ]
When the skx_get_dimm_attr() helper returns -EINVAL,
skx_get_dimm_info() does not validate these return values before using
them in a shift operation:
size = ((1ull << (rows + cols + ranks)) * banks) >> (20 - 3);
If all three values are -22, the shift exponent becomes -66, triggering
a UBSAN shift-out-of-bounds error:
UBSAN: shift-out-of-bounds in drivers/edac/skx_common.c
shift exponent -66 is negative
Fixes: 88a242c987 ("EDAC, skx_common: Separate common code out from skx_edac")
Signed-off-by: zhoumin <teczm@foxmail.com>
Signed-off-by: Tony Luck <tony.luck@intel.com>
Link: https://patch.msgid.link/tencent_2A0CC835A18366643CBD2865B169948AB409@qq.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit e71dc5602b ]
Before function level reset, driver first disable device error report
and then waits for the device reset to complete. However, when the
error is recovered, the error bits will be enabled again, resulting in
invalid disable. It is modified to detect that there is no error
before disable error report, and then do FLR.
Fixes: 7ce396fa12 ("crypto: hisilicon - add FLR support")
Signed-off-by: Weili Qian <qianweili@huawei.com>
Signed-off-by: Zongyu Wu <wuzongyu1@huawei.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit c0438198c2 ]
[BUG]
A fuzzed OCFS2 image can corrupt the current slot journal dinode while
mount is still in progress. The mount path first reports the invalid
journal block and then crashes in shutdown:
kernel BUG at fs/ocfs2/journal.c:1034!
Oops: invalid opcode: 0000 [#1] SMP KASAN NOPTI
RIP: 0010:ocfs2_journal_toggle_dirty+0x2d6/0x340 fs/ocfs2/journal.c:1034
Call Trace:
ocfs2_journal_shutdown+0x414/0xc30 fs/ocfs2/journal.c:1116
ocfs2_mount_volume fs/ocfs2/super.c:1785 [inline]
ocfs2_fill_super+0x30a9/0x3cd0 fs/ocfs2/super.c:1083
get_tree_bdev_flags+0x38b/0x640 fs/super.c:1698
get_tree_bdev+0x24/0x40 fs/super.c:1721
ocfs2_get_tree+0x21/0x30 fs/ocfs2/super.c:1184
vfs_get_tree+0x9a/0x370 fs/super.c:1758
fc_mount fs/namespace.c:1199 [inline]
do_new_mount_fc fs/namespace.c:3642 [inline]
do_new_mount fs/namespace.c:3718 [inline]
path_mount+0x5b8/0x1ea0 fs/namespace.c:4028
do_mount fs/namespace.c:4041 [inline]
__do_sys_mount fs/namespace.c:4229 [inline]
__se_sys_mount fs/namespace.c:4206 [inline]
__x64_sys_mount+0x282/0x320 fs/namespace.c:4206
...
[CAUSE]
ocfs2_journal_toggle_dirty() used to return -EIO when journal->j_bh no
longer contained a valid dinode, because the startup and shutdown paths
already handled that failure. Commit 10995aa245
("ocfs2: Morph the haphazard OCFS2_IS_VALID_DINODE() checks.") changed
the check to a BUG_ON() under the assumption that the journal dinode had
already been validated. That turns an unexpected invalid journal dinode
during mount teardown into a kernel crash instead of a normal mount
failure.
[FIX]
Replace the BUG_ON() with WARN_ON() and return -EIO. This keeps the
invariant warning for debugging, but restores the original behavior of
failing startup or shutdown cleanly instead of panicking the kernel.
Link: https://lore.kernel.org/20260512024115.4036371-1-gality369@gmail.com
Fixes: 10995aa245 ("ocfs2: Morph the haphazard OCFS2_IS_VALID_DINODE() checks.")
Signed-off-by: ZhengYuan Huang <gality369@gmail.com>
Reviewed-by: Joseph Qi <joseph.qi@linux.alibaba.com>
Cc: Mark Fasheh <mark@fasheh.com>
Cc: Joel Becker <jlbec@evilplan.org>
Cc: Junxiao Bi <junxiao.bi@oracle.com>
Cc: Changwei Ge <gechangwei@live.cn>
Cc: Jun Piao <piaojun@huawei.com>
Cc: Heming Zhao <heming.zhao@suse.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit fc15e3a30d ]
With a list_for_each() loop, if we don't find the item we are looking for
in the list, then the loop exits with the iterator, which is "dbell" in
this loop, pointing to invalid memory.
This code uses the "found" variable to determine if we have found the
doorbell we are looking for or not. However, the problem that the "found"
variable needs to be set to false at the start of each iteration,
otherwise after the first correct doorbell, then everything is marked as
found.
Reset the "found" to false at the start of the iteration and move the
variable inside the loop.
Link: https://lore.kernel.org/af2WHMZiqMwdYveO@stanley.mountain
Fixes: 48618fb4e5 ("RapidIO: add mport driver for Tsi721 bridge")
Signed-off-by: Dan Carpenter <error27@gmail.com>
Cc: Alexandre Bounine <alex.bou9@gmail.com>
Cc: Chul Kim <chul.kim@idt.com>
Cc: Matt Porter <mporter@kernel.crashing.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 8aa442cfce ]
When dev_dax_kmem_probe() partially succeeds (at least one range is
mapped) but a subsequent range fails request_mem_region() or
add_memory_driver_managed(), the probe silently continues, ultimately
returning success, but with the corresponding range resource NULL'ed out.
dev_dax_kmem_remove() iterates over all dax_device ranges regardless of if
the underlying resource exists. When remove_memory() is called later, it
returns 0 because the memory was never added which causes
dev_dax_kmem_remove() to incorrectly assume the (nonexistent) resource can
be removed and attempts cleanup on a NULL pointer.
Fix this by skipping these ranges altogether, noting that these cases are
considered success, such that the cleanup is still reached when all
actually-added ranges are successfully removed.
Link: https://lore.kernel.org/20260223201516.1517657-1-dave@stgolabs.net
Fixes: 60e93dc097 ("device-dax: add dis-contiguous resource support")
Signed-off-by: Davidlohr Bueso <dave@stgolabs.net>
Reviewed-by: Ben Cheatham <benjamin.cheatham@amd.com>
Reviewed-by: Alison Schofield <alison.schofield@intel.com>
Reviewed-by: Jonathan Cameron <jonathan.cameron@huawei.com>
Cc: Dan Williams <dan.j.williams@intel.com>
Cc: Dave Jiang <dave.jiang@intel.com>
Cc: Vishal Verma <vishal.l.verma@intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit b23705e6af ]
strset_add_str_mem() might reallocate the strset data buffer in order to
accommodate the provided string 's'. However, if 's' points to a string
already present in the buffer, it becomes dangling after the realloc.
This leads to a use-after-free when attempting to memcpy() the string
into the new buffer.
One scenario that triggers this problematic path is when resolve_btfids
attempts to patch kfunc prototypes using existing BTF parameter names:
| resolve_btfids: function bpf_list_push_back_impl already exists in BTF
| Segmentation fault (core dumped)
Compiling resolve_btfids with fsanitize=address generates a detailed
report of the UAF:
| =================================================================
| ERROR: AddressSanitizer: heap-use-after-free on address 0x7f4c4a500bd4
| ==1507892==ERROR: AddressSanitizer: heap-use-after-free on address 0x7f4c4a500bd4 at pc 0x55d25155a2a8 bp 0x7ffcef879060 sp 0x7ffcef878818
| READ of size 5 at 0x7f4c4a500bd4 thread T0
| #0 0x55d25155a2a7 in memcpy (tools/bpf/resolve_btfids/resolve_btfids+0xcf2a7)
| #1 0x55d2515d708e in strset__add_str tools/lib/bpf/strset.c:162:2
| #2 0x55d2515c730b in btf__add_str tools/lib/bpf/btf.c:2109:8
| #3 0x55d2515c9020 in btf__add_func_param tools/lib/bpf/btf.c:3108:14
| #4 0x55d25159f0b5 in process_kfunc_with_implicit_args tools/bpf/resolve_btfids/main.c:1196:9
| #5 0x55d25159e004 in btf2btf tools/bpf/resolve_btfids/main.c:1229:9
| #6 0x55d25159cee7 in main tools/bpf/resolve_btfids/main.c:1535:6
| #7 0x7f4c78e29f76 in __libc_start_call_main csu/../sysdeps/nptl/libc_start_call_main.h:58:16
| #8 0x7f4c78e2a026 in __libc_start_main csu/../csu/libc-start.c:360:3
| #9 0x55d2514bb860 in _start (tools/bpf/resolve_btfids/resolve_btfids+0x30860)
|
| 0x7f4c4a500bd4 is located 13268 bytes inside of 2829000-byte region [0x7f4c4a4fd800,0x7f4c4a7b02c8)
| freed by thread T0 here:
| #0 0x55d25155b700 in realloc (tools/bpf/resolve_btfids/resolve_btfids+0xd0700)
| #1 0x55d2515c426c in libbpf_reallocarray tools/lib/bpf/./libbpf_internal.h:220:9
| #2 0x55d2515c426c in libbpf_add_mem tools/lib/bpf/btf.c:224:13
|
| previously allocated by thread T0 here:
| #0 0x55d25155b2e3 in malloc (tools/bpf/resolve_btfids/resolve_btfids+0xd02e3)
| #1 0x55d2515d6e7d in strset__new tools/lib/bpf/strset.c:58:20
While resolve_btfids could be refactored to avoid this call path, let's
instead fix this issue at the source in strset__add_str() and avoid
similar scenarios.
Let's check if set->strs_data was reallocated and whether 's' points to
an internal string within the old strset buffer. In such case, 's' is
reconstructed to point to the new buffer.
While already here, also fix strset__find_str() which suffers from the
same problem by factoring out the common operations into a new helper
function strset_str_append().
Fixes: 90d76d3ece ("libbpf: Extract internal set-of-strings datastructure APIs")
Suggested-by: Andrii Nakryiko <andrii@kernel.org>
Suggested-by: Mykyta Yatsenko <yatsenko@meta.com>
Signed-off-by: Carlos Llamas <cmllamas@google.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20260523162722.2718940-1-cmllamas@google.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit fee9a38174 ]
parse_vma_segs() in tools/lib/bpf/usdt.c parses /proc/<pid>/maps
with two widthless scansets, "%s" into mode[16] and "%[^\n]"
into line[4096]. A VMA name in maps is not limited to that local
buffer; a deeply nested backing path can produce a maps record long
enough to overflow the stack buffer.
Bound both scansets to the declared buffer sizes ("%15s" for mode[16]
and "%4095[^\n]" for line[4096]) and drain any residue past line[4094]
with "%*[^\n]" before the trailing "\n". Without the drain, the residue
of an over-long record would stay in the stream and break the next
"%zx-%zx" parse, so the loop would exit early and silently skip later
maps records.
Also stop using sscanf(..., "%s") to peel the /proc/<pid>/root prefix
from lib_path. Parse the pid and prefix length with "%n", check for the
following slash, and copy the remainder with libbpf_strlcpy(). That
removes a second unbounded stack write and preserves paths containing
spaces.
Fixes: 74cc6311ce ("libbpf: Add USDT notes parsing and resolution logic")
Signed-off-by: Michael Bommarito <michael.bommarito@gmail.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Reviewed-by: Emil Tsalapatis <emil@etsalapatis.com>
Link: https://lore.kernel.org/bpf/20260522201353.1454653-1-michael.bommarito@gmail.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit c1cf2d5db8 ]
The NV_FUSE_STATUS_OPT_DISPLAY register is used to determine whether
the GPU has display hardware. The current code that normally reads
this register is instead hard-coded to check for GA100 vs later GPUs.
Since this function is called only on pre-Hopper GPUs, and this
if-statement applies only to GA100 and later, the check works
because GA100 is the only non-display Ampere and Ada GPU.
However, there actually is a register that can be read, so we should
use it.
Fixes: a34632482f ("drm/nouveau/bios/ga10[024]: initial support")
Signed-off-by: Timur Tabi <ttabi@nvidia.com>
Reviewed-by: Lyude Paul <lyude@redhat.com>
Link: https://patch.msgid.link/20260430223838.2530778-8-ttabi@nvidia.com
Signed-off-by: Danilo Krummrich <dakr@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 18f7476201 ]
Commit "iommu: return full error code from iommu_map_sg[_atomic]()"
changed iommu_map_sgtable() to return an ssize_t and negative values
in error cases, rather than a size_t and a zero.
pin_job() also was incorrectly assigning to 'int', which could cause
overflows into negative values.
Update pin_job() to correctly check for errors from iommu_map_sgtable.
Fixes: ad8f36e4b6 ("iommu: return full error code from iommu_map_sg[_atomic]()")
Signed-off-by: Mikko Perttunen <mperttunen@nvidia.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Link: https://patch.msgid.link/20260421-iommu_map_sgtable-return-v1-1-fb484c07d2a1@nvidia.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 63a3998d79 ]
The of_for_each_phandle() macro increments the reference count of the
device node it iterates over. If the loop exits early, the reference must
be released manually.
In tegra_dc_has_output(), the function returns true immediately when a
match is found, failing to release the current node's reference.
Fix this by adding a call to of_node_put() before returning from the loop.
Fixes: c57997bce4 ("drm/tegra: sor: Add Tegra186 support")
Signed-off-by: Felix Gu <ustc.gu@gmail.com>
Acked-by: Mikko Perttunen <mperttunen@nvidia.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Link: https://patch.msgid.link/20260128-dc-v1-1-a88205826301@gmail.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 3cbf5e3c46 ]
When a buffer object is pinned via host1x_bo_pin() with a cache, the
resulting mapping is kept in the cache so it can be reused on subsequent
pins. Each mapping held a reference to the underlying host1x_bo (taken
in tegra_bo_pin / gather_bo_pin), so as long as a mapping was cached,
the bo itself could not be freed.
However, the only way to remove the cached mapping was through the free
path of the buffer object. This meant that if a bo got cached, it could
never get freed again.
Resolve the circularity by holding a weak reference to the bo from the
cache side. This is done by having the .pin callbacks not bump the bo's
refcount -- instead the common Host1x bo code does so, except for the
cache reference.
Also move the remove-cache-mapping-on-free code into a common function
inside Host1x code. This is only called from the TegraDRM GEM buffers
since those are the only ones that can be cached at the moment.
Reported-by: Aaron Kling <webgeek1234@gmail.com>
Fixes: 1f39b1dfa5 ("drm/tegra: Implement buffer object cache")
Signed-off-by: Mikko Perttunen <mperttunen@nvidia.com>
Tested-by: Aaron Kling <webgeek1234@gmail.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Link: https://patch.msgid.link/20260515-host1x-bocache-leak-v1-1-a0375f68aeab@nvidia.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit c4ef5ba113 ]
The host1x_client_register() function is called just prior to register map
initialization loop, making the device available to userspace. This may
result in userspace attempting to submits a job before the register map is
initialized. Address this by moving register initialization before host1x
client registration.
Acked-by: Mikko Perttunen <mperttunen@nvidia.com>
Signed-off-by: Svyatoslav Ryhel <clamor95@gmail.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Link: https://patch.msgid.link/20260517091450.46728-2-clamor95@gmail.com
Stable-dep-of: ace01e2af3 ("drm/tegra: gr2d/gr3d: Contain PM in the gr*d_probe/gr*d_remove")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 27db54b90b ]
Quan Sun reported [1] a stack overflow in cls_bpf_offload_cmd().
Reproducer on netdevsim: add a skip_sw cls_bpf filter, set the
bpf_tc_accept debugfs knob to 0, then `tc filter replace`. The replace
calls tc_setup_cb_replace() which fails. cls_bpf_offload_cmd() then
swaps prog/oldprog and recursively calls itself to roll back. But
bpf_tc_accept=0 makes the rollback fail too, which triggers yet another
rollback frame with the same arguments, and so on until the stack is
exhausted.
bpf_tc_accept is just a convenient knob for the reproducer. Any driver
whose tc_setup_cb_replace() fails twice in a row can hit the same loop,
so this is not a netdevsim-only issue.
Two ways to fix it:
1) Have the rollback call tc_setup_cb_add() on oldprog instead of
re-entering cls_bpf_offload_cmd().
2) Mark the rollback frame with a flag and skip a second-level
rollback from inside it.
Go with (2). It is the smaller change and keeps the original behaviour:
the rollback still goes through tc_setup_cb_replace(), so the driver
gets one real chance to restore its state. If that attempt also fails,
we just return the original error instead of recursing.
[1]: https://lore.kernel.org/bpf/ce5a6005-3c5e-4696-9e05-eba9461dc860@std.uestc.edu.cn/T/#u
Fixes: 102740bd94 ("cls_bpf: fix offload assumptions after callback conversion")
Reviewed-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Jiayuan Chen <jiayuan.chen@linux.dev>
Link: https://patch.msgid.link/20260526025529.24382-1-jiayuan.chen@linux.dev
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 611583a76e ]
print_worker_info() declares its local 'fn' as work_func_t * but
worker->current_func has type work_func_t (a function pointer). The
extra level of indirection is wrong and only happens to be harmless
today because every supported Linux architecture has
sizeof(work_func_t) == sizeof(work_func_t *):
copy_from_kernel_nofault() reads the correct number of bytes by
accident, and %ps still resolves the printed address because the
stored value is the function address regardless of declared type.
On any future ABI where sizeof(void (*)()) differs from
sizeof(void *), the nofault copy would transfer the wrong number of
bytes and the subsequent %ps would print an incorrect address.
Match the field type so the intent is explicit and the code does not
silently rely on equal pointer sizes.
Fixes: 3d1cb2059d ("workqueue: include workqueue info when printing debug dump of a worker task")
Signed-off-by: Breno Leitao <leitao@debian.org>
Signed-off-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 001e57554d ]
struct nvme_ns_head contains a flexible array member, current_path[],
which is indexed using the NUMA node ID:
head->current_path[numa_node_id()]
The structure is currently allocated as:
size = sizeof(struct nvme_ns_head) +
(num_possible_nodes() * sizeof(struct nvme_ns *));
head = kzalloc(size, GFP_KERNEL);
This allocation assumes that NUMA node IDs are sequential and densely
packed from 0 .. num_possible_nodes() - 1. While this assumption holds
on many systems, it is not always true on some architectures such as
powerpc.
On some powerpc systems, NUMA node IDs can be sparse. For example:
NUMA:
NUMA node(s): 6
NUMA node0 CPU(s): 80-159
NUMA node8 CPU(s): 0-79
NUMA node252 CPU(s):
NUMA node253 CPU(s):
NUMA node254 CPU(s):
NUMA node255 CPU(s):
That is, the possible/online NUMA node IDs are: 0, 8, 252, 253, 254, 255
In this case: num_possible_nodes() = 6
So memory is allocated for only 6 entries in current_path[]. However,
the array is later indexed using the actual NUMA node ID. As a result,
accesses such as:
head->current_path[8] or
head->current_path[252]
goes out of bounds, leading to the following KASAN splat:
==================================================================
BUG: KASAN: slab-out-of-bounds in nvme_mpath_revalidate_paths+0x22c/0x290 [nvme_core]
Write of size 8 at addr c00020003bda35b8 by task kworker/u641:2/1997
CPU: 1 UID: 0 PID: 1997 Comm: kworker/u641:2 Not tainted 7.1.0-rc5-dirty #14 PREEMPT(lazy)
Hardware name: 8335-GTH POWER9 0x4e1202 opal:skiboot-v6.5.3-35-g1851b2a06 PowerNV
Workqueue: async async_run_entry_fn
Call Trace:
[c000200037fa7510] [c0000000021c23d4] dump_stack_lvl+0x88/0xdc (unreliable)
[c000200037fa7540] [c0000000009fda90] print_report+0x22c/0x67c
[c000200037fa7630] [c0000000009fd508] kasan_report+0x108/0x220
[c000200037fa7740] [c0000000009fff48] __asan_store8+0xe8/0x120
[c000200037fa7760] [c008000018e76474] nvme_mpath_revalidate_paths+0x22c/0x290 [nvme_core]
[c000200037fa7800] [c008000018e6556c] nvme_update_ns_info+0x4a4/0x5e0 [nvme_core]
[c000200037fa7a50] [c008000018e66270] nvme_alloc_ns+0x6d8/0x1a70 [nvme_core]
[c000200037fa7c20] [c008000018e679fc] nvme_scan_ns+0x3f4/0x630 [nvme_core]
[c000200037fa7d10] [c00000000031f22c] async_run_entry_fn+0x9c/0x3a0
[c000200037fa7db0] [c0000000002fa544] process_one_work+0x414/0xa10
[c000200037fa7ec0] [c0000000002fbf00] worker_thread+0x320/0x640
[c000200037fa7f80] [c00000000030d0f8] kthread+0x278/0x290
[c000200037fa7fe0] [c00000000000ded8] start_kernel_thread+0x14/0x18
Allocated by task 1997 on cpu 1 at 35.928317s:
The buggy address belongs to the object at c00020003bda3000
which belongs to the cache kmalloc-rnd-15-2k of size 2048
The buggy address is located 16 bytes to the right of
allocated 1448-byte region [c00020003bda3000, c00020003bda35a8)
The buggy address belongs to the physical page:
Memory state around the buggy address:
c00020003bda3480: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
c00020003bda3500: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
>c00020003bda3580: 00 00 00 00 00 fc fc fc fc fc fc fc fc fc fc fc
^
c00020003bda3600: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc
c00020003bda3680: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc
==================================================================
Fix this by allocating the flexible array using nr_node_ids instead
of num_possible_nodes(). Since nr_node_ids represents the maximum
possible NUMA node IDs, indexing current_path[] using numa_node_id()
becomes safe even on systems with sparse node IDs.
Fixes: f333444708 ("nvme: take node locality into account when selecting a path")
Tested-by: Mukesh Kumar Chaurasiya (IBM) <mkchauras@gmail.com>
Reviewed-by: Mukesh Kumar Chaurasiya (IBM) <mkchauras@gmail.com>
Reviewed-by: Hannes Reinecke <hare@kernel.org>
Reviewed-by: John Garry <john.g.garry@oracle.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Nilay Shroff <nilay@linux.ibm.com>
Signed-off-by: Keith Busch <kbusch@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Zhang Cen
Dmitry Antipov
Sandipan Das
Woojin Ji
Yunxiang Li
Al Viro
Alexander Potapenko
Guanyou.Chen
Danila Chernetsov
Sang-Heon Jeon
Deepanshu Kartikey
Chanwoo Lee
Dan Carpenter
Martin Wilck
Alison Schofield
Yuho Choi
Bart Van Assche
J. Neuschäfer
John Madieu
Zhang Yi
Chen Cheng
Danilo Krummrich
Renjiang Han
Tristan Madani
zhoumin
Jessica Zhang
Weili Qian
Tetsuo Handa
ZhengYuan Huang
Davidlohr Bueso
Carlos Llamas
Michael Bommarito
Timur Tabi
Mikko Perttunen
Felix Gu
Ion Agorria
Svyatoslav Ryhel
Jiayuan Chen
Eric Dumazet
Breno Leitao
Nilay Shroff