In 3.7, 8250 was unintentionally renamed to 8250_core. This happened in
the commit 835d844d1a (8250_pnp: do pnp probe before legacy probe).
This made 8250.<xxxx> module options effectively defunct. Instead,
8250_core.<xxxx> worked.
In 3.9, the commit f2b8dfd9e4 (serial: 8250: Keep 8250.<xxxx> module
options functional after driver rename) made the original options work
again by introducing a hack.
Later in 3.9, the commit 9196d8acd7 (TTY: 8250, revert module name
change) changed the module name back to 8250 (from 8250_core). Since
then, the hack was there to support the transient 8250_core.<xxxx>
options. Those were present only in the 3.7..3.9 range.
These transient options were deprecated by 9326b047e4 (TTY: 8250,
deprecated 8250_core.* options) in v3.9 too.
Now, after those 12 years, it is time to get rid of this hack
completely.
Signed-off-by: Jiri Slaby (SUSE) <jirislaby@kernel.org>
Link: https://patch.msgid.link/20251119092457.826789-4-jirislaby@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Neither uart_do_autoconfig(), nor uart_wait_modem_status() can return
-ENOIOCTLCMD. The ENOIOCTLCMD checks are there to check if 'cmd' matched
against TIOCSERCONFIG, and TIOCMIWAIT respectively. (With 0 or error in
'ret', it does not matter.)
Therefore, the code can simply return from the TIOCSERCONFIG and
TIOCMIWAIT spots immediately.
To be more explicit, use 'if' instead of switch-case for those single
values.
And return without jumping to the 'out' label -- it can be removed too.
Signed-off-by: Jiri Slaby (SUSE) <jirislaby@kernel.org>
Link: https://patch.msgid.link/20251119100140.830761-10-jirislaby@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Use guards in the pty code. This improves readability, makes error
handling easier, and marks locked portions of code explicit. All that
while being sure the lock is unlocked.
pty_set_pktmode() is handled specially -- the conditions are inverted
and return called if conditions unmet. This avoid double nested 'if's.
The variable is renamed to want_pktmode so it is not confused with the
current state of pktmode.
Signed-off-by: Jiri Slaby (SUSE) <jirislaby@kernel.org>
Link: https://patch.msgid.link/20251119100140.830761-2-jirislaby@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The row/column bounds (for a screen window box) are changed from
'offset one' to 'offset zero' and bound to the screen size using:
v->xs = min_t(u16, v->xs - 1, vc->vc_cols - 1);
This has the side effect of converting zero to the limit.
A check I'm adding to min_t() reports that (u16)(v->xs - 1) (etc)
discards signiticant bits (because v->xs is promoted to 'int' before
the addition).
If v->xs is zero (it comes from userspace) it converts -1 to 0xffff.
This is then bounded to 'vc->vc_cols - 1' which will be fine.
Replace with:
v->xs = umin(v->xs - 1, vc->vc_cols - 1);
which again converts a -1 to unsigned - this time to 0xffffffff,
with the same overall effect.
Whether zero is meant to mean the 'maximum size' is unknown.
I can't find any documentation for the ioctl and it pre-dates git.
Detected by an extra check added to min_t().
Signed-off-by: David Laight <david.laight.linux@gmail.com>
Reviewed-by: Jiri Slaby <jirislaby@kernel.org>
Link: https://patch.msgid.link/20251119224140.8616-28-david.laight.linux@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Simplify macro to_sc16is7xx_one() to only take one parameter, as most
of the time (19) it is called with the "port" structure name. This
improves readability.
For the remaining places where it is called (4), simply use container_of()
locally. This is similar to what is done in other drivers (ex: max310x).
For sc16is7xx_tx_proc(), first assigning "one" variable allows to simplify
"port" variable init.
Signed-off-by: Hugo Villeneuve <hvilleneuve@dimonoff.com>
Link: https://patch.msgid.link/20251027142957.1032073-10-hugo@hugovil.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Rename lock/unlock functions to make it more generic and applicable to both
the Enhanced register set and the Special register set.
Use this new generic function when accessing the Special register set in
sc16is7xx_set_baud(), and when accessing the Enhanced register set in
sc16is7xx_set_termios() and sc16is7xx_probe().
This helps readability and also avoid to make future mistakes when
accessing these obfuscated registers.
Signed-off-by: Hugo Villeneuve <hvilleneuve@dimonoff.com>
Link: https://patch.msgid.link/20251027142957.1032073-4-hugo@hugovil.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This mutex is used as a lock when accessing registers that share the same
address space, not necessarily EFR registers.
For example, address 0x06 is shared by MSR, TCR and XOFF1 registers,
independently of EFR.
Rename the mutex with a more generic name to avoid misinterpreting its
usage.
Signed-off-by: Hugo Villeneuve <hvilleneuve@dimonoff.com>
Link: https://patch.msgid.link/20251027142957.1032073-3-hugo@hugovil.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Pull char/misc driver fixes from Greg KH:
"Here are some small char/misc/android driver fixes for 6.18-rc3 for
reported issues. Included in here are:
- rust binder fixes for reported issues
- mei device id addition
- mei driver fixes
- comedi bugfix
- most usb driver bugfixes
- fastrpc memory leak fix
All of these have been in linux-next for a while with no reported
issues"
* tag 'char-misc-6.18-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc:
most: usb: hdm_probe: Fix calling put_device() before device initialization
most: usb: Fix use-after-free in hdm_disconnect
binder: remove "invalid inc weak" check
mei: txe: fix initialization order
comedi: fix divide-by-zero in comedi_buf_munge()
mei: late_bind: Fix -Wincompatible-function-pointer-types-strict
misc: fastrpc: Fix dma_buf object leak in fastrpc_map_lookup
mei: me: add wildcat lake P DID
misc: amd-sbi: Clarify that this is a BMC driver
nvmem: rcar-efuse: add missing MODULE_DEVICE_TABLE
binder: Fix missing kernel-doc entries in binder.c
rust_binder: report freeze notification only when fully frozen
rust_binder: don't delete FreezeListener if there are pending duplicates
rust_binder: freeze_notif_done should resend if wrong state
rust_binder: remove warning about orphan mappings
rust_binder: clean `clippy::mem_replace_with_default` warning
Pull staging driver fixes from Greg KH:
"Here are some small staging driver fixes for the gpib subsystem to
resolve some reported issues. Included in here are:
- memory leak fixes
- error code fixes
- proper protocol fixes
All of these have been in linux-next for almost 2 weeks now with no
reported issues"
* tag 'staging-6.18-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging:
staging: gpib: Fix device reference leak in fmh_gpib driver
staging: gpib: Return -EINTR on device clear
staging: gpib: Fix sending clear and trigger events
staging: gpib: Fix no EOI on 1 and 2 byte writes
Pull tty/serial driver fixes from Greg KH:
"Here are some small tty and serial driver fixes for reported issues.
Included in here are:
- sh-sci serial driver fixes
- 8250_dw and _mtk driver fixes
- sc16is7xx driver bugfix
- new 8250_exar device ids added
All of these have been in linux-next this past week with no reported
issues"
* tag 'tty-6.18-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty:
serial: 8250_mtk: Enable baud clock and manage in runtime PM
serial: 8250_dw: handle reset control deassert error
dt-bindings: serial: sh-sci: Fix r8a78000 interrupts
serial: sc16is7xx: remove useless enable of enhanced features
serial: 8250_exar: add support for Advantech 2 port card with Device ID 0x0018
tty: serial: sh-sci: fix RSCI FIFO overrun handling
Pull USB driver fixes from Greg KH:
"Here are some small USB driver fixes and new device ids for 6.18-rc3.
Included in here are:
- new option serial driver device ids added
- dt bindings fixes for numerous platforms
- xhci bugfixes for many reported regressions
- usbio dependency bugfix
- dwc3 driver fix
- raw-gadget bugfix
All of these have been in linux-next this week with no reported issues"
* tag 'usb-6.18-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb:
USB: serial: option: add Telit FN920C04 ECM compositions
USB: serial: option: add Quectel RG255C
tcpm: switch check for role_sw device with fw_node
usb/core/quirks: Add Huawei ME906S to wakeup quirk
usb: raw-gadget: do not limit transfer length
USB: serial: option: add UNISOC UIS7720
xhci: dbc: enable back DbC in resume if it was enabled before suspend
xhci: dbc: fix bogus 1024 byte prefix if ttyDBC read races with stall event
usb: xhci-pci: Fix USB2-only root hub registration
dt-bindings: usb: qcom,snps-dwc3: Fix bindings for X1E80100
usb: misc: Add x86 dependency for Intel USBIO driver
dt-bindings: usb: switch: split out ports definition
usb: dwc3: Don't call clk_bulk_disable_unprepare() twice
dt-bindings: usb: dwc3-imx8mp: dma-range is required only for imx8mp
Pull x86 fixes from Borislav Petkov:
- Remove dead code leftovers after a recent mitigations cleanup which
fail a Clang build
- Make sure a Retbleed mitigation message is printed only when
necessary
- Correct the last Zen1 microcode revision for which Entrysign sha256
check is needed
- Fix a NULL ptr deref when mounting the resctrl fs on a system which
supports assignable counters but where L3 total and local bandwidth
monitoring has been disabled at boot
* tag 'x86_urgent_for_v6.18_rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/bugs: Remove dead code which might prevent from building
x86/bugs: Qualify RETBLEED_INTEL_MSG
x86/microcode: Fix Entrysign revision check for Zen1/Naples
x86,fs/resctrl: Fix NULL pointer dereference with events force-disabled in mbm_event mode
Pull irq fixes from Borislav Petkov:
- Restore the original buslock locking in a couple of places in the irq
core subsystem after a rework
* tag 'irq_urgent_for_v6.18_rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
genirq/manage: Add buslock back in to enable_irq()
genirq/manage: Add buslock back in to __disable_irq_nosync()
genirq/chip: Add buslock back in to irq_set_handler()
Pull objtool fixes from Borislav Petkov:
- Fix x32 build due to wrong format specifier on that sub-arch
- Add one more Rust noreturn function to objtool's list
* tag 'objtool_urgent_for_v6.18_rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
objtool: Fix failure when being compiled on x32 system
objtool/rust: add one more `noreturn` Rust function
Pull scheduler fix from Borislav Petkov:
- Make sure a CFS runqueue on a throttled hierarchy has its PELT clock
throttled otherwise task movement and manipulation would lead to
dangling cfs_rq references and an eventual crash
* tag 'sched_urgent_for_v6.18_rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
sched/fair: Start a cfs_rq on throttled hierarchy with PELT clock throttled
Pull timer fix from Borislav Petkov:
- Do not create more than eight (max supported) AUX clocks sysfs
hierarchies
* tag 'timers_urgent_for_v6.18_rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
timekeeping: Fix aux clocks sysfs initialization loop bound
Pull driver core fixes from Danilo Krummrich:
- In Device::parent(), do not make any assumptions on the device
context of the parent device
- Check visibility before changing ownership of a sysfs attribute
group
- In topology_parse_cpu_capacity(), replace an incorrect usage of
PTR_ERR_OR_ZERO() with IS_ERR_OR_NULL()
- In devcoredump, fix a circular locking dependency between
struct devcd_entry::mutex and kernfs
- Do not warn about a pending fw_devlink sync state
* tag 'driver-core-6.18-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/driver-core/driver-core:
arch_topology: Fix incorrect error check in topology_parse_cpu_capacity()
rust: device: fix device context of Device::parent()
sysfs: check visibility before changing group attribute ownership
devcoredump: Fix circular locking dependency with devcd->mutex.
driver core: fw_devlink: Don't warn about sync_state() pending
Pull firewire fixes from Takashi Sakamoto:
"A small collection of FireWire fixes. This includes corrections to
sparse and API documentation"
* tag 'firewire-fixes-6.18-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/ieee1394/linux1394:
firewire: init_ohci1394_dma: add missing function parameter documentation
firewire: core: fix __must_hold() annotation
Pull RISC-V fixes from Paul Walmsley:
- Close a race during boot between userspace vDSO usage and some
late-initialized vDSO data
- Improve performance on systems with non-CPU-cache-coherent
DMA-capable peripherals by enabling write combining on
pgprot_dmacoherent() allocations
- Add human-readable detail for RISC-V IPI tracing
- Provide more information to zsmalloc on 64-bit RISC-V to improve
allocation
- Silence useless boot messages about CPUs that have been disabled in
DT
- Resolve some compiler and smatch warnings and remove a redundant
macro
* tag 'riscv-for-linus-6.18-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux:
riscv: hwprobe: avoid uninitialized variable use in hwprobe_arch_id()
riscv: cpufeature: avoid uninitialized variable in has_thead_homogeneous_vlenb()
riscv: hwprobe: Fix stale vDSO data for late-initialized keys at boot
riscv: add a forward declaration for cpuinfo_op
RISC-V: Don't print details of CPUs disabled in DT
riscv: Remove the PER_CPU_OFFSET_SHIFT macro
riscv: mm: Define MAX_POSSIBLE_PHYSMEM_BITS for zsmalloc
riscv: Register IPI IRQs with unique names
ACPI: RIMT: Fix unused function warnings when CONFIG_IOMMU_API is disabled
RISC-V: Define pgprot_dmacoherent() for non-coherent devices
Pull xfs fixes from Carlos Maiolino:
"The main highlight here is a fix for a bug brought in by the removal
of attr2 mount option, where some installations might actually have
'attr2' explicitly configured in fstab preventing system to boot by
not being able to remount the rootfs as RW.
Besides that there are a couple fix to the zonefs implementation,
changing XFS_ONLINE_SCRUB_STATS to depend on DEBUG_FS (was select
before), and some other minor changes"
* tag 'xfs-fixes-6.18-rc3' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux:
xfs: fix locking in xchk_nlinks_collect_dir
xfs: loudly complain about defunct mount options
xfs: always warn about deprecated mount options
xfs: don't set bt_nr_sectors to a negative number
xfs: don't use __GFP_NOFAIL in xfs_init_fs_context
xfs: cache open zone in inode->i_private
xfs: avoid busy loops in GCD
xfs: XFS_ONLINE_SCRUB_STATS should depend on DEBUG_FS
xfs: do not tightly pack-write large files
xfs: Improve CONFIG_XFS_RT Kconfig help
Pull smb server fixes from Steve French:
"smbdirect (RDMA) fixes in order avoid potential submission queue
overflows:
- free transport teardown fix
- credit related fixes (five server related, one client related)"
* tag 'v6.18-rc2-smb-server-fixes' of git://git.samba.org/ksmbd:
smb: server: let free_transport() wait for SMBDIRECT_SOCKET_DISCONNECTED
smb: client: make use of smbdirect_socket.send_io.lcredits.*
smb: server: make use of smbdirect_socket.send_io.lcredits.*
smb: server: simplify sibling_list handling in smb_direct_flush_send_list/send_done
smb: server: smb_direct_disconnect_rdma_connection() already wakes all waiters on error
smb: smbdirect: introduce smbdirect_socket.send_io.lcredits.*
smb: server: allocate enough space for RW WRs and ib_drain_qp()
Clang is not happy with set but unused variable (this is visible
with `make W=1` build:
kernel/sched/sched.h:3744:18: error: variable 'cpumask' set but not used [-Werror,-Wunused-but-set-variable]
It seems like the variable was never used along with the assignment
that does not have side effects as far as I can see. Remove those
altogether.
Fixes: 223baf9d17 ("sched: Fix performance regression introduced by mm_cid")
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Tested-by: Eric Biggers <ebiggers@kernel.org>
Reviewed-by: Breno Leitao <leitao@debian.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Jiri Slaby (SUSE)
David Laight
Lad Prabhakar
Hugo Villeneuve
Heiko Stuebner
Kriish Sharma
Gopi Krishna Menon
Greg Kroah-Hartman
Linus Torvalds
Andy Shevchenko