Wa_15010599737 was a workaround originally proposed (and ultimately
rejected) for DG2-G10. There's no record of it ever being relevant or
even considered for any other platforms.
The specific bit this workaround was setting is documented as "This bit
should be set to 1 for the DX9 API and 0 for all other APIs" which means
that it should almost always be left at the default value of 0 on Linux.
The register itself is directly accessible from userspace, so in the
special cases where it might be relevant (e.g., Wine/Proton running
Windows DX9 apps), the userspace drivers already have the ability to
change the setting without involvement of the kernel.
Fixes: 7f3ee7d880 ("drm/xe/xe2hpg: Add initial GT workarounds")
Reviewed-by: Balasubramani Vivekanandan <balasubramani.vivekanandan@intel.com>
Link: https://patch.msgid.link/20260223-forupstream-wa_cleanup-v3-2-7f201eb2f172@intel.com
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Some compute applications may try to allocate device memory to probe
how much device memory is actually available, assuming that the
application will be the only one running on the particular GPU.
That strategy fails in fault mode since it allows VM overcommit.
While this could be resolved in user-space it's further complicated
by cgroups potentially restricting the amount of memory available
to the application.
Introduce a vm create flag, DRM_XE_VM_CREATE_NO_VM_OVERCOMMIT, that
allows fault mode to mimic the behaviour of !fault mode WRT this. It
blocks evicting same vm bos during VM_BIND processing. However,
it does *not* block evicting same-vm bos during pagefault
processing, preferring eviction rather than VM banning in
OOM situations.
Cc: John Falkowski <john.falkowski@intel.com>
Cc: Michal Mrozek <michal.mrozek@intel.com>
Cc: Matthew Brost <matthew.brost@intel.com>
Signed-off-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Reviewed-by: Matthew Brost <matthew.brost@intel.com>
Link: https://patch.msgid.link/20260204153320.17989-1-thomas.hellstrom@linux.intel.com
Given the new policy of allowing graphics/media IP ranges to extend over
unused IP versions, we can consolidate some of the OOB workaround rules
and simplify the table. If new IP variants eventually show up that use
these unused versions (e.g., media version 30.01, graphics versions
20.03 / 30.02, etc.), and if an existing workaround does not extend to
that new intermediate version, the ranges will be split back apart as
part of the enablement work for that new IP version.
Reviewed-by: Shuicheng Lin <shuicheng.lin@intel.com>
Link: https://patch.msgid.link/20260220-forupstream-wa_cleanup-v2-22-b12005a05af6@intel.com
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
During early Xe driver development, our policy for applying workarounds
to ranges of IP versions was to only use GRAPHICS_VERSION_RANGE and
MEDIA_VERSION_RANGE rules when all of the affected IP versions had
consecutive version numbers; otherwise separate RTP entries should be
used. For example, a workaround that applies to all Xe2-based platforms
would be implemented in the driver with two RTP entries: one using
GRAPHICS_VERSION_RANGE(2001, 2002) and the other using
GRAPHICS_VERSION(2004). This ensured that if a new IP variant showed up
in the future with currently unused version 20.03, an old workaround
entry wouldn't automatically apply to it by accident (and we could
always consolidate those two distinct entries in the future if the
workaround database did explicitly indicate that 20.03 also needed the
workaround).
Now that we're a couple years down the road with this driver, the number
of IP versions supported is much larger (several Xe2 20.xx versions,
several Xe3 30.xx versions, and a couple Xe3p 35.xx versions). When new
workarounds are discovered that need to apply to a wide range of IPs,
it's becoming more of a pain to create independent entries for each
non-contiguous range of versions, and the general consensus is that we
should revisit our previous policy and start allowing use of
VERSION_RANGE constructs for non-contiguous version ranges.
Note that allowing ranges that cover currently unused versions will
require additional care if/when some of those intermediate version
numbers start being used in the future. We'll need to re-check every
workaround that has a range including the new IP version and check the
hardware database to see whether the workaround also applies to the new
version (no code change required) or whether we need to split the
existing range into two separate ranges that don't cover the new
version. The platform enabling engineers are willing to take on this
extra review burden at the time we first enable a new IP in the driver
(see lore link below for one recent discussion).
Update the kerneldoc for the workaround file to make the new policy
official.
Link: https://lore.kernel.org/all/20260203233600.GT458797@mdroper-desk1.amr.corp.intel.com/
Reviewed-by: Balasubramani Vivekanandan <balasubramani.vivekanandan@intel.com>
Link: https://patch.msgid.link/20260220-forupstream-wa_cleanup-v2-3-b12005a05af6@intel.com
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Production PVC hardware had a graphics stepping of C0. Xe1 platforms
already aren't officially supported by the Xe driver, but pre-production
steppings are especially out of scope (and 'has_pre_prod_wa' is not set
in the device descriptor). Drop the workarounds that aren't relevant to
production hardware.
v2:
- Drop the stream->override_gucrc which is no longer set anywhere after
the removal of Wa_1509372804. (Bala)
- Drop xe_guc_rc_set_mode / xe_guc_rc_unset_mode which are no longer
used after the removal of Wa_1509372804.
Bspec: 44484
Cc: Balasubramani Vivekanandan <balasubramani.vivekanandan@intel.com>
Reviewed-by: Balasubramani Vivekanandan <balasubramani.vivekanandan@intel.com>
Link: https://patch.msgid.link/20260220-forupstream-wa_cleanup-v2-2-b12005a05af6@intel.com
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Wa_14015795083 and Wa_14014475959 only apply to early steppings of
Xe_LPG that appeared only in pre-production hardware (in fact
Wa_14014475959 wasn't supposed to apply to _any_ steppings of version
12.71). Xe1 platforms already aren't officially supported by the Xe
driver, but pre-production steppings are especially out of scope (and
'has_pre_prod_wa' is not set in the device descriptor). Drop both
workarounds.
Bspec: 55420
Reviewed-by: Balasubramani Vivekanandan <balasubramani.vivekanandan@intel.com>
Link: https://patch.msgid.link/20260220-forupstream-wa_cleanup-v2-1-b12005a05af6@intel.com
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
CCS save/restore batch buffers are attached during BO allocation and
detached during BO teardown. The shrinker triggers xe_bo_move(), which is
used for both allocation and deletion paths.
When BO allocation and shrinking occur concurrently, a circular locking
dependency involving fs_reclaim and swap_guard can occur, leading to a
deadlock such as:
*===============================================================*
* WARNING: possible circular locking dependency detected *
*---------------------------------------------------------------*
* *
* CPU0 CPU1 *
* ---- ---- *
* lock(fs_reclaim); *
* lock(&sa_manager->swap_guard); *
* lock(fs_reclaim); *
* lock(&sa_manager->swap_guard); *
* *
* *** DEADLOCK *** *
*===============================================================*
To avoid this, the BB pointer and SA are allocated using xe_bb_alloc()
before taking lock and SA is initialized using xe_bb_init() preventing
reclaim from being invoked in this context.
Fixes: 864690cf4d ("drm/xe/vf: Attach and detach CCS copy commands with BO")
Signed-off-by: Satyanarayana K V P <satyanarayana.k.v.p@intel.com>
Cc: Matthew Brost <matthew.brost@intel.com>
Cc: Michal Wajdeczko <michal.wajdeczko@intel.com>
Cc: Matthew Auld <matthew.auld@intel.com>
Cc: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Cc: Maarten Lankhorst <dev@lankhorst.se>
Reviewed-by: Matthew Brost <matthew.brost@intel.com>
Signed-off-by: Matthew Brost <matthew.brost@intel.com>
Link: https://patch.msgid.link/20260220055519.2485681-7-satyanarayana.k.v.p@intel.com
xe_sync_entry_parse() can allocate references (syncobj, fence, chain fence,
or user fence) before hitting a later failure path. Several of those paths
returned directly, leaving partially initialized state and leaking refs.
Route these error paths through a common free_sync label and call
xe_sync_entry_cleanup(sync) before returning the error.
Fixes: dd08ebf6c3 ("drm/xe: Introduce a new DRM driver for Intel GPUs")
Cc: Matthew Brost <matthew.brost@intel.com>
Signed-off-by: Shuicheng Lin <shuicheng.lin@intel.com>
Reviewed-by: Matthew Brost <matthew.brost@intel.com>
Signed-off-by: Matthew Brost <matthew.brost@intel.com>
Link: https://patch.msgid.link/20260219233516.2938172-5-shuicheng.lin@intel.com
In case VF's VRAM provisioning using sysfs is done by the admin
prior to VFs enabling, this provisioning will be lost as PF will
run VRAM auto-provisioning anyway. To avoid that skip this auto-
provisioning if any VF has been already provisioned with VRAM.
To help admin find any mistakes, add diagnostics messages about
which VFs were provisioned with VRAM and which were missed.
Signed-off-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Reviewed-by: Piotr Piórkowski <piotr.piorkowski@intel.com>
Link: https://patch.msgid.link/20260218205553.3561-10-michal.wajdeczko@intel.com
Instead of trying very hard to find the largest fair VRAM (aka LMEM)
size that could be allocated for VFs on the current tile, pick some
smaller rounded down to power-of-two value that is more likely to be
provisioned in the same manner by the other PF instances.
In some cases, the outcome of above calculation might not be optimal,
but it's expected that admin will do fine-tuning using sysfs files.
Signed-off-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Reviewed-by: Piotr Piórkowski <piotr.piorkowski@intel.com>
Link: https://patch.msgid.link/20260218205553.3561-6-michal.wajdeczko@intel.com
On current discrete platforms, PF will provision all VFs with a fair
amount of the VRAM (LMEM) during VFs enabling. However, in some cases
this automatic VRAM provisioning might be either non-reproducible or
sub-optimal. This could break VF's migration or impact performance.
Expose per-VF VRAM quota read-write sysfs attributes to allow admin
change default VRAM provisioning performed by the PF.
/sys/bus/pci/drivers/xe/BDF/
├── sriov_admin/
├── .bulk_profile
│ └── vram_quota [RW] unsigned integer
├── vf1/
│ └── profile
│ └── vram_quota [RW] unsigned integer
├── vf2/
│ └── profile
│ └── vram_quota [RW] unsigned integer
Above values represent total provisioned VRAM from all tiles where
VFs were assigned, and currently it's from all tiles always.
Note that changing VRAM provisioning is only possible when VF is
not running, otherwise GuC will complain. To make sure that given
VF is idle, triggering VF FLR might be needed.
Signed-off-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Reviewed-by: Piotr Piórkowski <piotr.piorkowski@intel.com>
Acked-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patch.msgid.link/20260218205553.3561-5-michal.wajdeczko@intel.com
reg_sr programming that applies to an engines LRC cannot be verified by
a simple CPU-based register readout because the reg_sr's values may not
be in effect if no context is executing on the hardware at the time we
check. Instead, we should verify correct reg_sr application by
searching for the register in the default_lrc.
Reviewed-by: Ashutosh Dixit <ashutosh.dixit@intel.com>
Link: https://patch.msgid.link/20260218-sr_verify-v4-4-35d6deeb3421@intel.com
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
An LRC is stored in memory as a special batchbuffer that hardware will
execute to re-load state when switching to the context; it's a
collection of register values (encoded as MI_LOAD_REGISTER_IMM commands)
and other state instructions (e.g., 3DSTATE_*). The value that will be
loaded for a given register can be determined by parsing the batchbuffer
to find MI_LRI commands and extracting the value from the offset/value
pairs it contains. Add functions to do this, which will be used in a
future patch to help verify that our expected reg_sr programming is in
place.
The implementation here returns the value as soon as it finds a match in
the LRC. Technically a register could appear multiple times (either due
to memory corruption or a hardware defect) and the last value
encountered would be the one in effect when the context resumes
execution. We can adjust the logic to keep looking and return the last
match instead of first in the future if we encounter real-world cases
where this would assist with debugging.
Reviewed-by: Ashutosh Dixit <ashutosh.dixit@intel.com>
Link: https://patch.msgid.link/20260218-sr_verify-v4-3-35d6deeb3421@intel.com
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
When applying save-restore register programming for workarounds, tuning
settings, and general device configuration we assume the programming was
successful. However there are a number of cases where the desired
reg_sr programming can become lost:
- workarounds implemented on the wrong RTP table might not get
saved/restored at the right time leading to, for example, failure to
re-apply the programming after engine resets
- some hardware registers become "locked" and can no longer be updated
after firmware or the driver finishes initializing them
- sometimes the hardware teams just made a mistake when documenting the
register and/or bits that needed to be programmed
Add a debugfs entry that will read back the registers referenced on a
GT's save-restore lists and print any cases where the desired
programming is no longer in effect. Such cases might indicate the
presence of a driver/firmware bug, might indicate that the documentation
we were following has a mistake, or might be benign (occasionally
registers have broken read-back capability preventing verification, but
previous writes were still successful and effective).
For now we only verify the GT and engine reg_sr lists. Verifying the
LRC list will require checking the expected programming against the
default_lrc contents, not the live registers (which may not reflect the
reg_sr programming if no context is actively running).
Reviewed-by: Ashutosh Dixit <ashutosh.dixit@intel.com>
Link: https://patch.msgid.link/20260218-sr_verify-v4-2-35d6deeb3421@intel.com
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Uma Shankar
Matt Roper
Thomas Hellström
Varun Gupta
Satyanarayana K V P
Shuicheng Lin
Michal Wajdeczko
Tomasz Lis
Harish Chegondi
Nitin Gote