Instead of using hardwired video loopback limited to a single vivid
instance, use the new 'Connected To' controls to only loopback if an
HDMI or S-Video input is connected to another output, which can be
in another vivid instance. Effectively this emulates connecting and
disconnecting an HDMI/S-Video cable.
The Loop Video control is dropped since it has now been replaced by
the new 'Connected To' controls. The Display Present has also been
dropped since it no longer fits.
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Co-developed-by: Dorcas Anono Litunya <anonolitunya@gmail.com>
Signed-off-by: Dorcas Anono Litunya <anonolitunya@gmail.com>
The video loopback functionality in vivid is very crude. What we really
want is to be able to emulate connecting an HDMI or S-Video input to
an HDMI or S-Video output, and the input and output can be in different
vivid instances.
Effectively this emulates what happens when you physically connect an
HDMI or S-Video cable between two devices.
In particular, this makes prototyping with vivid much more realistic.
This patch creates a menu control for each HDMI or S-Video input. The
menu control starts with "Test Pattern Generator" and "None" (i.e.
disconnected). After that up to 62 HDMI or S-Video outputs are listed
that you can connect the input to.
If there are more than 62 HDMI or S-Video outputs, then those will not
be included in the menu (currently menucontrols have max 64 entries).
If an input is connected to an output, then all other 'Connected To'
controls are updated to exclude that output to avoid having multiple
inputs connected to the same output.
Signed-off-by: Dorcas Anono Litunya <anonolitunya@gmail.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
[hverkuil: use u8 in loops in vivid_create_controls() to avoid truncate warning]
Add the instance number before the input or output number.
So "HDMI 1" becomes "HDMI 000-1".
This is helps identifying which input or output belongs to
which vivid instance.
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
When setting the EDID it would attempt to update two controls
that are only present if there is an HDMI output configured.
If there isn't any (e.g. when the vivid module is loaded with
node_types=1), then calling VIDIOC_S_EDID would crash.
Fix this by first checking if outputs are present.
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Returning an EDID for a connected output would modify the original
input EDID with the physical address of the output. That causes
problems, and it should just update the physical address of the
output EDID.
Update vivid_hdmi_edid to set the physical address to 0.0.0.0.
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Modifying documentation to remove 'Capture Overlay section' as
destructive capture overlay support was removed.
See commit ccaa9d50ca ("media: vivid: drop overlay support")
Signed-off-by: Dorcas Anono Litunya <anonolitunya@gmail.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Drop the "Video, VBI and RDS Looping" section, instead moving the
Video/VBI info to section "Video and Sliced VBI looping" and the
RDS info to section "Radio & RDS Looping".
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
The documentation contained several instances of "section X"
references, which no longer map to whatever X was.
Replace these by the section titles.
Also fix a single confusing typo in the "Radio & RDS Looping" section:
"are regular frequency intervals" -> "at regular frequency intervals"
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
To support sources that implement the .enable_streams() and
.disable_streams() operations, replace the manual calls to the subdev
.s_stream() operation with the v4l2_subdev_enable_streams() and
v4l2_subdev_disable_streams() helpers. The helpers fall back to
.s_stream() if the source doesn't implement the new operations, so
backward compatibility is preserved.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
Reviewed-by: Rui Miguel Silva <rmfrfs@gmail.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
While queue_setup was correct for CREATE_BUFS support for
video devices, for VBI, SDR and touch devices it was wrong.
This was found after adding new v4l2-compliance tests.
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
In several places a division by fmt->vdownsampling[p] was
missing in the sizeimage[p] calculation, causing incorrect
behavior for multiplanar formats were some planes are smaller
than the first plane.
Found by new v4l2-compliance tests.
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Store the active formats and crop rectangle in the subdevice active
state. This simplifies implementation of the format and selection
accessors, and allows using the v4l2_subdev_get_fmt() helper to
implement the .get_fmt() operation.
The active configuration that is used in the .process_frame() handler is
still stored in the vimc_scaler_device structure. The driver could
instead access the active state in the .process_frame() handler, but the
required locking could interfere with the real time constraints of the
frame processing. This data would be stored in registers in the
.s_stream() handler for real hardware, storing it in dedicated storage
thus mimics a real driver. To differentiate them from the rest of the
device private data, move the corresponding fields to a sub-structure of
vimc_scaler_device named hw.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Store the active formats and crop rectangle in the subdevice active
state. This simplifies implementation of the format and selection
accessors, and allows using the v4l2_subdev_get_fmt() helper to
implement the .get_fmt() operation.
The active configuration that is used in the .process_frame() handler is
still stored in the vimc_debayer_device structure. The driver could
instead access the active state in the .process_frame() handler, but the
required locking could interfere with the real time constraints of the
frame processing. This data would be stored in registers in the
.s_stream() handler for real hardware, storing it in dedicated storage
thus mimics a real driver. To differentiate them from the rest of the
device private data, move the corresponding fields to a sub-structure of
vimc_debayer_device named hw.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Store the active formats and crop rectangle in the subdevice active
state. This simplifies implementation of the format and selection
accessors, and allows using the v4l2_subdev_get_fmt() helper to
implement the .get_fmt() operation.
The active configuration that is used in the .process_frame() handler is
still stored in the vimc_sensor_device structure. The driver could
instead access the active state in the .process_frame() handler, but the
required locking could interfere with the real time constraints of the
frame processing. This data would be stored in registers in the
.s_stream() handler for real hardware, storing it in dedicated storage
thus mimics a real driver. To differentiate them from the rest of the
device private data, move the corresponding fields to a sub-structure of
vimc_sensor_device named hw.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Finalize subdev initialization for all subdevs that provide a
.init_state() operation. This creates an active state for all those
subdevs, which subsequent patches will use to simplify the
implementation of individual vimc entities.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Initialize the subdev internal_ops field in the vimc_ent_sd_register()
function. This handles the internal ops the same way as the subdev ops,
and prepares for moving to the V4L2 subdev active state API.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
The vimc_ent_type structure contains static pointers to functions, and
no other information that need to be modified after initialization. Make
them const to avoid the risk of arbitrary code execution following an
overflow that would overwrite the structure's contents.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
- Conversion of max9286 and adv748x to V4L2 subdev active state
- Cleanups and fixes for the Renesas R-Car VSP and VIN drivers
- Miscellaneous cleanups to V4L2 core
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Fix flags in X1 Yoga example. MEDIA_LNK_FL_DYNAMIC (0x4 in the link flag)
was removed in V4 Intel IPU6 and IPU6 input system drivers. Added -V flag
to media-ctl commands for X1 Yoga, lower-case v only makes it verbose
upper-case V sets the format.
Signed-off-by: Samuel Wein <sam@samwein.com>
[Sakari Ailus: Align subject line, rewrap commit message.]
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
smatch generated this warning:
drivers/media/usb/b2c2/flexcop-usb.c:199 flexcop_usb_memory_req() warn: iterator 'i' not incremented
and indeed the function is not using i or updating buf.
The reason this always worked is that this function is called to write just
6 bytes (a MAC address) to the USB device, and so in practice there is only
a single chunk written. If we ever would need to write more than one chunk,
this function would fail since each chunk would read from or write to the
same buf address.
Rewrite the function to properly handle this.
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Enable documentation for v4l2-jpeg header related helper functions which
are useful for parsing jpeg files while decoding or creating jpeg headers
while encoding.
Signed-off-by: Devarsh Thakkar <devarsht@ti.com>
Signed-off-by: Sebastian Fricke <sebastian.fricke@collabora.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Export reference quantization and huffman tables as provided in ITU-T.81 so
that they can be re-used by other JPEG drivers.
These are example tables provided in ITU-T.81 as reference tables and the
JPEG encoders are free to use either these or their own proprietary tables.
Also add necessary prefixes to be used for huffman tables in global header
file.
Signed-off-by: Devarsh Thakkar <devarsht@ti.com>
Reviewed-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Sebastian Fricke <sebastian.fricke@collabora.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Hans Verkuil
Dorcas Anono Litunya
Laurent Pinchart
Alain Volmat
Jacopo Mondi
Naushir Patuck
Kory Maincent
Harshit Mogalapalli
Wolfram Sang
Samuel Wein
Zhi Mao
Devarsh Thakkar