commit 17c144f110 upstream.
The check if the initial mapping is sufficient needs to happen much
earlier during bootup. Move this test directly to the start_parisc()
function and use native PDC iodc functions to print the warning, because
panic() and printk() are not functional yet.
This fixes boot when enabling various KALLSYSMS options which need
much more space.
Signed-off-by: Helge Deller <deller@gmx.de>
Cc: <stable@vger.kernel.org> # v6.0+
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 8475d8fe21 upstream.
The KERNEL_INITIAL_ORDER value defines the initial size (usually 32 or
64 MB) of the page table during bootup. Up until now the whole area was
initialized with PTE entries, but there was no check if we filled too
many entries. Change the code to fill up with so many entries that the
"_end" symbol can be reached by the kernel, but not more entries than
actually fit into the initial PTE tables.
Signed-off-by: Helge Deller <deller@gmx.de>
Cc: <stable@vger.kernel.org> # v6.0+
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 25dd70a03b upstream.
The q54sj108a2_debugfs_read function suffers from a stack buffer overflow
due to incorrect arguments passed to bin2hex(). The function currently
passes 'data' as the destination and 'data_char' as the source.
Because bin2hex() converts each input byte into two hex characters, a
32-byte block read results in 64 bytes of output. Since 'data' is only
34 bytes (I2C_SMBUS_BLOCK_MAX + 2), this writes 30 bytes past the end
of the buffer onto the stack.
Additionally, the arguments were swapped: it was reading from the
zero-initialized 'data_char' and writing to 'data', resulting in
all-zero output regardless of the actual I2C read.
Fix this by:
1. Expanding 'data_char' to 66 bytes to safely hold the hex output.
2. Correcting the bin2hex() argument order and using the actual read count.
3. Using a pointer to select the correct output buffer for the final
simple_read_from_buffer call.
Fixes: d014538aa3 ("hwmon: (pmbus) Driver for Delta power supplies Q54SJ108A2")
Cc: stable@vger.kernel.org
Signed-off-by: Sanman Pradhan <psanman@juniper.net>
Link: https://lore.kernel.org/r/20260304235116.1045-1-sanman.p211993@gmail.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit c25c4aa3f7 upstream.
Commit 143937ca51 ("arm64, mm: avoid always making PTE dirty in
pte_mkwrite()") changed pte_mkwrite_novma() to only clear PTE_RDONLY
when PTE_DIRTY is set. This was to allow writable-clean PTEs for swap
pages that haven't actually been written.
However, this broke kexec and hibernation for some platforms. Both go
through trans_pgd_create_copy() -> _copy_pte(), which calls
pte_mkwrite_novma() to make the temporary linear-map copy fully
writable. With the updated pte_mkwrite_novma(), read-only kernel pages
(without PTE_DIRTY) remain read-only in the temporary mapping.
While such behaviour is fine for user pages where hardware DBM or
trapping will make them writeable, subsequent in-kernel writes by the
kexec relocation code will fault.
Add PTE_DIRTY back to all _PAGE_KERNEL* protection definitions. This was
the case prior to 5.4, commit aa57157be6 ("arm64: Ensure
VM_WRITE|VM_SHARED ptes are clean by default"). With the kernel
linear-map PTEs always having PTE_DIRTY set, pte_mkwrite_novma()
correctly clears PTE_RDONLY.
Fixes: 143937ca51 ("arm64, mm: avoid always making PTE dirty in pte_mkwrite()")
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Cc: stable@vger.kernel.org
Reported-by: Jianpeng Chang <jianpeng.chang.cn@windriver.com>
Link: https://lore.kernel.org/r/20251204062722.3367201-1-jianpeng.chang.cn@windriver.com
Cc: Will Deacon <will@kernel.org>
Cc: Huang, Ying <ying.huang@linux.alibaba.com>
Cc: Guenter Roeck <linux@roeck-us.net>
Reviewed-by: Huang Ying <ying.huang@linux.alibaba.com>
Signed-off-by: Will Deacon <will@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 8f3c6f08ab upstream.
If we have runtime suspended, and userspace wants to use /dev/drm_dp_*
then just tell it the device is busy instead of crashing in the GSP
code.
WARNING: CPU: 2 PID: 565741 at drivers/gpu/drm/nouveau/nvkm/subdev/gsp/rm/r535/rpc.c:164 r535_gsp_msgq_wait+0x9a/0xb0 [nouveau]
CPU: 2 UID: 0 PID: 565741 Comm: fwupd Not tainted 6.18.10-200.fc43.x86_64 #1 PREEMPT(lazy)
Hardware name: LENOVO 20QTS0PQ00/20QTS0PQ00, BIOS N2OET65W (1.52 ) 08/05/2024
RIP: 0010:r535_gsp_msgq_wait+0x9a/0xb0 [nouveau]
This is a simple fix to get backported. We should probably engineer a
proper power domain solution to wake up devices and keep them awake
while fw updates are happening.
Cc: stable@vger.kernel.org
Fixes: 8894f4919b ("drm/nouveau: register a drm_dp_aux channel for each dp connector")
Reviewed-by: Lyude Paul <lyude@redhat.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Link: https://patch.msgid.link/20260224031750.791621-1-airlied@gmail.com
Signed-off-by: Danilo Krummrich <dakr@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 8e732934fb upstream.
The 32MB initial kernel mapping can become too small when CONFIG_KALLSYMS
is used. Increase the mapping to 64 MB in this case.
Signed-off-by: Helge Deller <deller@gmx.de>
Cc: <stable@vger.kernel.org> # v6.0+
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit cfc83a3c71 upstream.
batadv_v_elp_get_throughput() might be called when the RTNL lock is already
held. This could be problematic when the work queue item is cancelled via
cancel_delayed_work_sync() in batadv_v_elp_iface_disable(). In this case,
an rtnl_lock() would cause a deadlock.
To avoid this, rtnl_trylock() was used in this function to skip the
retrieval of the ethtool information in case the RTNL lock was already
held.
But for cfg80211 interfaces, batadv_get_real_netdev() was called - which
also uses rtnl_lock(). The approach for __ethtool_get_link_ksettings() must
also be used instead and the lockless version __batadv_get_real_netdev()
has to be called.
Cc: stable@vger.kernel.org
Fixes: 8c8ecc98f5 ("batman-adv: Drop unmanaged ELP metric worker")
Reported-by: Christian Schmidbauer <github@grische.xyz>
Signed-off-by: Sven Eckelmann <sven@narfation.org>
Tested-by: Sören Skaarup <freifunk_nordm4nn@gmx.de>
Signed-off-by: Simon Wunderlich <sw@simonwunderlich.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 0a663b764d upstream.
When multiple syscall events are specified in the kernel command line
(e.g., trace_event=syscalls:sys_enter_openat,syscalls:sys_enter_close),
they are often not captured after boot, even though they appear enabled
in the tracing/set_event file.
The issue stems from how syscall events are initialized. Syscall
tracepoints require the global reference count (sys_tracepoint_refcount)
to transition from 0 to 1 to trigger the registration of the syscall
work (TIF_SYSCALL_TRACEPOINT) for tasks, including the init process (pid 1).
The current implementation of early_enable_events() with disable_first=true
used an interleaved sequence of "Disable A -> Enable A -> Disable B -> Enable B".
If multiple syscalls are enabled, the refcount never drops to zero,
preventing the 0->1 transition that triggers actual registration.
Fix this by splitting early_enable_events() into two distinct phases:
1. Disable all events specified in the buffer.
2. Enable all events specified in the buffer.
This ensures the refcount hits zero before re-enabling, allowing syscall
events to be properly activated during early boot.
The code is also refactored to use a helper function to avoid logic
duplication between the disable and enable phases.
Cc: stable@vger.kernel.org
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Link: https://patch.msgid.link/20260224023544.1250787-1-hehuiwen@kylinos.cn
Fixes: ce1039bd3a ("tracing: Fix enabling of syscall events on the command line")
Signed-off-by: Huiwen He <hehuiwen@kylinos.cn>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit dabffd0854 upstream.
MANA hardware requires at least one doorbell ring every 8 wraparounds
of the CQ. The driver rings the doorbell as a form of flow control to
inform hardware that CQEs have been consumed.
The NAPI poll functions mana_poll_tx_cq() and mana_poll_rx_cq() can
poll up to CQE_POLLING_BUFFER (512) completions per call. If the CQ
has fewer than 512 entries, a single poll call can process more than
4 wraparounds without ringing the doorbell. The doorbell threshold
check also uses ">" instead of ">=", delaying the ring by one extra
CQE beyond 4 wraparounds. Combined, these issues can cause the driver
to exceed the 8-wraparound hardware limit, leading to missed
completions and stalled queues.
Fix this by capping the number of CQEs polled per call to 4 wraparounds
of the CQ in both TX and RX paths. Also change the doorbell threshold
from ">" to ">=" so the doorbell is rung as soon as 4 wraparounds are
reached.
Cc: stable@vger.kernel.org
Fixes: 58a63729c9 ("net: mana: Fix doorbell out of order violation and avoid unnecessary doorbell rings")
Signed-off-by: Long Li <longli@microsoft.com>
Reviewed-by: Haiyang Zhang <haiyangz@microsoft.com>
Reviewed-by: Vadim Fedorenko <vadim.fedorenko@linux.dev>
Link: https://patch.msgid.link/20260226192833.1050807-1-longli@microsoft.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 24d8771272 upstream.
The ule_mandatory_ext_handlers[] and ule_optional_ext_handlers[] tables
in handle_one_ule_extension() are declared with 255 elements (valid
indices 0-254), but the index htype is derived from network-controlled
data as (ule_sndu_type & 0x00FF), giving a range of 0-255. When
htype equals 255, an out-of-bounds read occurs on the function pointer
table, and the OOB value may be called as a function pointer.
Add a bounds check on htype against the array size before either table
is accessed. Out-of-range values now cause the SNDU to be discarded.
Fixes: 1da177e4c3 ("Linux-2.6.12-rc2")
Reported-by: Ariel Silver <arielsilver77@gmail.com>
Signed-off-by: Ariel Silver <arielsilver77@gmail.com>
Cc: stable@vger.kernel.org
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit feae40a6a1 upstream.
It may happen that VF spawned for E610 adapter has problem with setting
link up. This happens when ixgbevf supporting mailbox API 1.6 cooperates
with PF driver which doesn't support this version of API, and hence
doesn't support new approach for getting PF link data.
In that case VF asks PF to provide link data but as PF doesn't support
it, returns -EOPNOTSUPP what leads to early bail from link configuration
sequence.
Avoid such situation by using legacy VFLINKS approach whenever negotiated
API version is less than 1.6.
To reproduce the issue just create VF and set its link up - adapter must
be any from the E610 family, ixgbevf must support API 1.6 or higher while
ixgbevf must not.
Fixes: 53f0eb62b4 ("ixgbevf: fix getting link speed data for E610 devices")
Reviewed-by: Aleksandr Loktionov <aleksandr.loktionov@intel.com>
Reviewed-by: Piotr Kwapulinski <piotr.kwapulinski@intel.com>
Reviewed-by: Paul Menzel <pmenzel@molgen.mpg.de>
Cc: stable@vger.kernel.org
Signed-off-by: Jedrzej Jagielski <jedrzej.jagielski@intel.com>
Tested-by: Rafal Romanowski <rafal.romanowski@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit ce9e40a9a5 upstream.
The ITS driver blindly assumes that EventIDs are in abundant supply, to the
point where it never checks how many the hardware actually supports.
It turns out that some pretty esoteric integrations make it so that only a
few bits are available, all the way down to a single bit.
Enforce the advertised limitation at the point of allocating the device
structure, and hope that the endpoint driver can deal with such limitation.
Fixes: 84a6a2e7fc ("irqchip: GICv3: ITS: device allocation and configuration")
Signed-off-by: Marc Zyngier <maz@kernel.org>
Signed-off-by: Thomas Gleixner <tglx@kernel.org>
Reviewed-by: Robin Murphy <robin.murphy@arm.com>
Reviewed-by: Zenghui Yu <zenghui.yu@linux.dev>
Cc: stable@vger.kernel.org
Link: https://patch.msgid.link/20260206154816.3582887-1-maz@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 2692c614f8 upstream.
When device_get_child_node_count() got split to the fwnode and device
respective APIs, the fwnode didn't inherit the ability to traverse over
the secondary fwnode. Hence any user, that switches from device to fwnode
API misses this feature. In particular, this was revealed by the commit
1490cbb9db ("device property: Split fwnode_get_child_node_count()")
that effectively broke the GPIO enumeration on Intel Galileo boards.
Fix this by moving the secondary lookup from device to fwnode API.
Note, in general no device_*() API should go into the depth of the fwnode
implementation.
Fixes: 114dbb4fa7 ("drivers property: When no children in primary, try secondary")
Cc: stable@vger.kernel.org
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Rafael J. Wysocki (Intel) <rafael@kernel.org>
Reviewed-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Link: https://patch.msgid.link/20260210135822.47335-1-andriy.shevchenko@linux.intel.com
Signed-off-by: Danilo Krummrich <dakr@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 803ec1faf7 upstream.
In samsung_dsim_host_attach(), drm_bridge_add() is called to add the
bridge. However, if samsung_dsim_register_te_irq() or
pdata->host_ops->attach() fails afterwards, the function returns
without removing the bridge, causing a memory leak.
Fix this by adding proper error handling with goto labels to ensure
drm_bridge_remove() is called in all error paths. Also ensure that
samsung_dsim_unregister_te_irq() is called if the attach operation
fails after the TE IRQ has been registered.
samsung_dsim_unregister_te_irq() function is moved without changes
to be before samsung_dsim_host_attach() to avoid forward declaration.
Fixes: e7447128ca ("drm: bridge: Generalize Exynos-DSI driver into a Samsung DSIM bridge")
Cc: stable@vger.kernel.org
Signed-off-by: Osama Abdelkader <osama.abdelkader@gmail.com>
Reviewed-by: Luca Ceresoli <luca.ceresoli@bootlin.com>
Link: https://patch.msgid.link/20260209184115.10937-1-osama.abdelkader@gmail.com
Signed-off-by: Luca Ceresoli <luca.ceresoli@bootlin.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 6b275bfaa1 upstream.
This reverts commit 1366cd228b.
The fwnode_usb_role_switch_get() returns NULL only if no connection is
found, returns ERR_PTR(-EPROBE_DEFER) if connection is found but deferred
probe is needed, or a valid pointer of usb_role_switch.
When switching from a NULL check to IS_ERR_OR_NULL(), usb_role_switch_get()
returns NULL and overwrites the ERR_PTR(-EPROBE_DEFER) returned by
fwnode_usb_role_switch_get(). This causes the deferred probe indication to
be lost, preventing the USB role switch from ever being retrieved.
Fixes: 1366cd228b ("tcpm: allow looking for role_sw device in the main node")
Cc: stable <stable@kernel.org>
Signed-off-by: Xu Yang <xu.yang_2@nxp.com>
Tested-by: Arnaud Ferraris <arnaud.ferraris@collabora.com>
Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Link: https://patch.msgid.link/20260309074313.2809867-2-xu.yang_2@nxp.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit b0bd84c392 ]
In __ufshcd_wl_suspend(), cancel_delayed_work_sync() is called to cancel
the UFS RTC work, but it is placed after ufshcd_vops_suspend(hba, pm_op,
POST_CHANGE). This creates a race condition where ufshcd_rtc_work() can
still be running while ufshcd_vops_suspend() is executing. When
UFSHCD_CAP_CLK_GATING is not supported, the condition
!hba->clk_gating.active_reqs is always true, causing ufshcd_update_rtc()
to be executed. Since ufshcd_vops_suspend() typically performs clock
gating operations, executing ufshcd_update_rtc() at that moment triggers
an SError. The kernel panic trace is as follows:
Kernel panic - not syncing: Asynchronous SError Interrupt
Call trace:
dump_backtrace+0xec/0x128
show_stack+0x18/0x28
dump_stack_lvl+0x40/0xa0
dump_stack+0x18/0x24
panic+0x148/0x374
nmi_panic+0x3c/0x8c
arm64_serror_panic+0x64/0x8c
do_serror+0xc4/0xc8
el1h_64_error_handler+0x34/0x4c
el1h_64_error+0x68/0x6c
el1_interrupt+0x20/0x58
el1h_64_irq_handler+0x18/0x24
el1h_64_irq+0x68/0x6c
ktime_get+0xc4/0x12c
ufshcd_mcq_sq_stop+0x4c/0xec
ufshcd_mcq_sq_cleanup+0x64/0x1dc
ufshcd_clear_cmd+0x38/0x134
ufshcd_issue_dev_cmd+0x298/0x4d0
ufshcd_exec_dev_cmd+0x1a4/0x1c4
ufshcd_query_attr+0xbc/0x19c
ufshcd_rtc_work+0x10c/0x1c8
process_scheduled_works+0x1c4/0x45c
worker_thread+0x32c/0x3e8
kthread+0x120/0x1d8
ret_from_fork+0x10/0x20
Fix this by moving cancel_delayed_work_sync() before the call to
ufshcd_vops_suspend(hba, pm_op, PRE_CHANGE), ensuring the UFS RTC work is
fully completed or cancelled at that point.
Cc: Bean Huo <beanhuo@iokpp.de>
Fixes: 6bf999e0eb ("scsi: ufs: core: Add UFS RTC support")
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Wang Shuaiwei <wangshuaiwei1@xiaomi.com>
Link: https://patch.msgid.link/20260307035128.3419687-1-wangshuaiwei1@xiaomi.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit f311a05784 ]
The DesignWare I3C master controller ACKs IBIs as soon as a valid
Device Address Table (DAT) entry is present. This can create a race
between device attachment (after DAA) and the point where the client
driver enables IBIs via i3c_device_enable_ibi().
Set DEV_ADDR_TABLE_SIR_REJECT in the DAT entry during
attach_i3c_dev() and reattach_i3c_dev() so that IBIs are rejected
by default. The bit is managed thereafter by the existing
dw_i3c_master_set_sir_enabled() function, which clears it in
enable_ibi() after ENEC is issued, and restores it in disable_ibi()
after DISEC.
Fixes: 1dd728f5d4 ("i3c: master: Add driver for Synopsys DesignWare IP")
Signed-off-by: Adrian Ng Ho Yin <adrianhoyin.ng@altera.com>
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Link: https://patch.msgid.link/53f5b8cbdd8af789ec38b95b02873f32f9182dd6.1770962368.git.adrianhoyin.ng@altera.com
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 755a648e78 ]
The trace_clock_jiffies() function that handles the "uptime" clock for
tracing calls jiffies_64_to_clock_t(). This causes the function tracer to
constantly recurse when the tracing clock is set to "uptime". Mark it
notrace to prevent unnecessary recursion when using the "uptime" clock.
Fixes: 58d4e21e50 ("tracing: Fix wraparound problems in "uptime" trace clock")
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Signed-off-by: Thomas Gleixner <tglx@kernel.org>
Link: https://patch.msgid.link/20260306212403.72270bb2@robin
Signed-off-by: Sasha Levin <sashal@kernel.org>
commit 040d159a45 upstream.
Add __putname() calls to error code paths that did not free the "path"
pointer obtained by __getname(). If ownership of this pointer is not
passed to the caller via path_info.path, the function must free it
before returning.
Cc: stable@vger.kernel.org
Fixes: 3fd945a79e ("ceph: encode encrypted name in ceph_mdsc_build_path and dentry release")
Fixes: 550f7ca98e ("ceph: give up on paths longer than PATH_MAX")
Signed-off-by: Max Kellermann <max.kellermann@ionos.com>
Reviewed-by: Viacheslav Dubeyko <Slava.Dubeyko@ibm.com>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit ce0123cbb4 upstream.
During async unlink, we drop the `i_nlink` counter before we receive
the completion (that will eventually update the `i_nlink`) because "we
assume that the unlink will succeed". That is not a bad idea, but it
races against deletions by other clients (or against the completion of
our own unlink) and can lead to an underrun which emits a WARNING like
this one:
WARNING: CPU: 85 PID: 25093 at fs/inode.c:407 drop_nlink+0x50/0x68
Modules linked in:
CPU: 85 UID: 3221252029 PID: 25093 Comm: php-cgi8.1 Not tainted 6.14.11-cm4all1-ampere #655
Hardware name: Supermicro ARS-110M-NR/R12SPD-A, BIOS 1.1b 10/17/2023
pstate: 60400009 (nZCv daif +PAN -UAO -TCO -DIT -SSBS BTYPE=--)
pc : drop_nlink+0x50/0x68
lr : ceph_unlink+0x6c4/0x720
sp : ffff80012173bc90
x29: ffff80012173bc90 x28: ffff086d0a45aaf8 x27: ffff0871d0eb5680
x26: ffff087f2a64a718 x25: 0000020000000180 x24: 0000000061c88647
x23: 0000000000000002 x22: ffff07ff9236d800 x21: 0000000000001203
x20: ffff07ff9237b000 x19: ffff088b8296afc0 x18: 00000000f3c93365
x17: 0000000000070000 x16: ffff08faffcbdfe8 x15: ffff08faffcbdfec
x14: 0000000000000000 x13: 45445f65645f3037 x12: 34385f6369706f74
x11: 0000a2653104bb20 x10: ffffd85f26d73290 x9 : ffffd85f25664f94
x8 : 00000000000000c0 x7 : 0000000000000000 x6 : 0000000000000002
x5 : 0000000000000081 x4 : 0000000000000481 x3 : 0000000000000000
x2 : 0000000000000000 x1 : 0000000000000000 x0 : ffff08727d3f91e8
Call trace:
drop_nlink+0x50/0x68 (P)
vfs_unlink+0xb0/0x2e8
do_unlinkat+0x204/0x288
__arm64_sys_unlinkat+0x3c/0x80
invoke_syscall.constprop.0+0x54/0xe8
do_el0_svc+0xa4/0xc8
el0_svc+0x18/0x58
el0t_64_sync_handler+0x104/0x130
el0t_64_sync+0x154/0x158
In ceph_unlink(), a call to ceph_mdsc_submit_request() submits the
CEPH_MDS_OP_UNLINK to the MDS, but does not wait for completion.
Meanwhile, between this call and the following drop_nlink() call, a
worker thread may process a CEPH_CAP_OP_IMPORT, CEPH_CAP_OP_GRANT or
just a CEPH_MSG_CLIENT_REPLY (the latter of which could be our own
completion). These will lead to a set_nlink() call, updating the
`i_nlink` counter to the value received from the MDS. If that new
`i_nlink` value happens to be zero, it is illegal to decrement it
further. But that is exactly what ceph_unlink() will do then.
The WARNING can be reproduced this way:
1. Force async unlink; only the async code path is affected. Having
no real clue about Ceph internals, I was unable to find out why the
MDS wouldn't give me the "Fxr" capabilities, so I patched
get_caps_for_async_unlink() to always succeed.
(Note that the WARNING dump above was found on an unpatched kernel,
without this kludge - this is not a theoretical bug.)
2. Add a sleep call after ceph_mdsc_submit_request() so the unlink
completion gets handled by a worker thread before drop_nlink() is
called. This guarantees that the `i_nlink` is already zero before
drop_nlink() runs.
The solution is to skip the counter decrement when it is already zero,
but doing so without a lock is still racy (TOCTOU). Since
ceph_fill_inode() and handle_cap_grant() both hold the
`ceph_inode_info.i_ceph_lock` spinlock while set_nlink() runs, this
seems like the proper lock to protect the `i_nlink` updates.
I found prior art in NFS and SMB (using `inode.i_lock`) and AFS (using
`afs_vnode.cb_lock`). All three have the zero check as well.
Cc: stable@vger.kernel.org
Fixes: 2ccb45462a ("ceph: perform asynchronous unlink if we have sufficient caps")
Signed-off-by: Max Kellermann <max.kellermann@ionos.com>
Reviewed-by: Viacheslav Dubeyko <Slava.Dubeyko@ibm.com>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit a5a3737050 upstream.
Similar checks are performed for all control frames, but an early check
for message frames was missing. process_message() is already set up to
terminate the loop in case the state changes while con->ops->dispatch()
handler is being executed.
Cc: stable@vger.kernel.org
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
Reviewed-by: Alex Markuze <amarkuze@redhat.com>
Reviewed-by: Viacheslav Dubeyko <Slava.Dubeyko@ibm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 770444611f upstream.
This patch fixes unnecessary implicit conversions that change signedness
of blob_len and num_mon in ceph_monmap_decode().
Currently blob_len and num_mon are (signed) int variables. They are used
to hold values that are always non-negative and get assigned in
ceph_decode_32_safe(), which is meant to assign u32 values. Both
variables are subsequently used as unsigned values, and the value of
num_mon is further assigned to monmap->num_mon, which is of type u32.
Therefore, both variables should be of type u32. This is especially
relevant for num_mon. If the value read from the incoming message is
very large, it is interpreted as a negative value, and the check for
num_mon > CEPH_MAX_MON does not catch it. This leads to the attempt to
allocate a very large chunk of memory for monmap, which will most likely
fail. In this case, an unnecessary attempt to allocate memory is
performed, and -ENOMEM is returned instead of -EINVAL.
Cc: stable@vger.kernel.org
Signed-off-by: Raphael Zimmer <raphael.zimmer@tu-ilmenau.de>
Reviewed-by: Viacheslav Dubeyko <Slava.Dubeyko@ibm.com>
Reviewed-by: Ilya Dryomov <idryomov@gmail.com>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 69fb5d91bb upstream.
If the message frame is (maliciously) corrupted in a way that the
length of the control segment ends up being less than the size of the
message header or a different frame is made to look like a message
frame, out-of-bounds reads may ensue in process_message_header().
Perform an explicit bounds check before decoding the message header.
Cc: stable@vger.kernel.org
Reported-by: Raphael Zimmer <raphael.zimmer@tu-ilmenau.de>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
Reviewed-by: Alex Markuze <amarkuze@redhat.com>
Reviewed-by: Viacheslav Dubeyko <Slava.Dubeyko@ibm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit c4c22b846e upstream.
While head_onwire_len() has a branch to handle ctrl_len == 0 case,
prepare_read_control() always sets up a kvec for the CRC meaning that
a non-empty control segment is effectively assumed. All frames that
clients deal with meet that assumption, so let's make it official and
treat the preamble with an empty control segment as malformed.
Cc: stable@vger.kernel.org
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
Reviewed-by: Alex Markuze <amarkuze@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit b282c43ed1 upstream.
This patch fixes an out-of-bounds access in ceph_handle_auth_reply()
that can be triggered by a message of type CEPH_MSG_AUTH_REPLY. In
ceph_handle_auth_reply(), the value of the payload_len field of such a
message is stored in a variable of type int. A value greater than
INT_MAX leads to an integer overflow and is interpreted as a negative
value. This leads to decrementing the pointer address by this value and
subsequently accessing it because ceph_decode_need() only checks that
the memory access does not exceed the end address of the allocation.
This patch fixes the issue by changing the data type of payload_len to
u32. Additionally, the data type of result_msg_len is changed to u32,
as it is also a variable holding a non-negative length.
Also, an additional layer of sanity checks is introduced, ensuring that
directly after reading it from the message, payload_len and
result_msg_len are not greater than the overall segment length.
BUG: KASAN: slab-out-of-bounds in ceph_handle_auth_reply+0x642/0x7a0 [libceph]
Read of size 4 at addr ffff88811404df14 by task kworker/20:1/262
CPU: 20 UID: 0 PID: 262 Comm: kworker/20:1 Not tainted 6.19.2 #5 PREEMPT(voluntary)
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.16.3-debian-1.16.3-2 04/01/2014
Workqueue: ceph-msgr ceph_con_workfn [libceph]
Call Trace:
<TASK>
dump_stack_lvl+0x76/0xa0
print_report+0xd1/0x620
? __pfx__raw_spin_lock_irqsave+0x10/0x10
? kasan_complete_mode_report_info+0x72/0x210
kasan_report+0xe7/0x130
? ceph_handle_auth_reply+0x642/0x7a0 [libceph]
? ceph_handle_auth_reply+0x642/0x7a0 [libceph]
__asan_report_load_n_noabort+0xf/0x20
ceph_handle_auth_reply+0x642/0x7a0 [libceph]
mon_dispatch+0x973/0x23d0 [libceph]
? apparmor_socket_recvmsg+0x6b/0xa0
? __pfx_mon_dispatch+0x10/0x10 [libceph]
? __kasan_check_write+0x14/0x30i
? mutex_unlock+0x7f/0xd0
? __pfx_mutex_unlock+0x10/0x10
? __pfx_do_recvmsg+0x10/0x10 [libceph]
ceph_con_process_message+0x1f1/0x650 [libceph]
process_message+0x1e/0x450 [libceph]
ceph_con_v2_try_read+0x2e48/0x6c80 [libceph]
? __pfx_ceph_con_v2_try_read+0x10/0x10 [libceph]
? save_fpregs_to_fpstate+0xb0/0x230
? raw_spin_rq_unlock+0x17/0xa0
? finish_task_switch.isra.0+0x13b/0x760
? __switch_to+0x385/0xda0
? __kasan_check_write+0x14/0x30
? mutex_lock+0x8d/0xe0
? __pfx_mutex_lock+0x10/0x10
ceph_con_workfn+0x248/0x10c0 [libceph]
process_one_work+0x629/0xf80
? __kasan_check_write+0x14/0x30
worker_thread+0x87f/0x1570
? __pfx__raw_spin_lock_irqsave+0x10/0x10
? __pfx_try_to_wake_up+0x10/0x10
? kasan_print_address_stack_frame+0x1f7/0x280
? __pfx_worker_thread+0x10/0x10
kthread+0x396/0x830
? __pfx__raw_spin_lock_irq+0x10/0x10
? __pfx_kthread+0x10/0x10
? __kasan_check_write+0x14/0x30
? recalc_sigpending+0x180/0x210
? __pfx_kthread+0x10/0x10
ret_from_fork+0x3f7/0x610
? __pfx_ret_from_fork+0x10/0x10
? __switch_to+0x385/0xda0
? __pfx_kthread+0x10/0x10
ret_from_fork_asm+0x1a/0x30
</TASK>
[ idryomov: replace if statements with ceph_decode_need() for
payload_len and result_msg_len ]
Cc: stable@vger.kernel.org
Signed-off-by: Raphael Zimmer <raphael.zimmer@tu-ilmenau.de>
Reviewed-by: Viacheslav Dubeyko <Slava.Dubeyko@ibm.com>
Reviewed-by: Ilya Dryomov <idryomov@gmail.com>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 6c5a9baa15 upstream.
A user can set conn_timeout to any value via
setsockopt(TIPC_CONN_TIMEOUT), including values less than 4. When a
SYN is rejected with TIPC_ERR_OVERLOAD and the retry path in
tipc_sk_filter_connect() executes:
delay %= (tsk->conn_timeout / 4);
If conn_timeout is in the range [0, 3], the integer division yields 0,
and the modulo operation triggers a divide-by-zero exception, causing a
kernel oops/panic.
Fix this by clamping conn_timeout to a minimum of 4 at the point of use
in tipc_sk_filter_connect().
Oops: divide error: 0000 [#1] SMP KASAN NOPTI
CPU: 0 UID: 0 PID: 119 Comm: poc-F144 Not tainted 7.0.0-rc2+
RIP: 0010:tipc_sk_filter_rcv (net/tipc/socket.c:2236 net/tipc/socket.c:2362)
Call Trace:
tipc_sk_backlog_rcv (include/linux/instrumented.h:82 include/linux/atomic/atomic-instrumented.h:32 include/net/sock.h:2357 net/tipc/socket.c:2406)
__release_sock (include/net/sock.h:1185 net/core/sock.c:3213)
release_sock (net/core/sock.c:3797)
tipc_connect (net/tipc/socket.c:2570)
__sys_connect (include/linux/file.h:62 include/linux/file.h:83 net/socket.c:2098)
Fixes: 6787927475 ("tipc: buffer overflow handling in listener socket")
Cc: stable@vger.kernel.org
Signed-off-by: Mehul Rao <mehulrao@gmail.com>
Reviewed-by: Tung Nguyen <tung.quang.nguyen@est.tech>
Link: https://patch.msgid.link/20260310170730.28841-1-mehulrao@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 901084c51a upstream.
Move claimed and retune control flags out of the bitfield word to
avoid unrelated RMW side effects in asynchronous contexts.
The host->claimed bit shared a word with retune flags. Writes to claimed
in __mmc_claim_host() or retune_now in mmc_mq_queue_rq() can overwrite
other bits when concurrent updates happen in other contexts, triggering
spurious WARN_ON(!host->claimed). Convert claimed, can_retune,
retune_now and retune_paused to bool to remove shared-word coupling.
Fixes: 6c0cedd1ef ("mmc: core: Introduce host claiming by context")
Fixes: 1e8e55b670 ("mmc: block: Add CQE support")
Cc: stable@vger.kernel.org
Suggested-by: Adrian Hunter <adrian.hunter@intel.com>
Signed-off-by: Penghe Geng <pgeng@nvidia.com>
Acked-by: Adrian Hunter <adrian.hunter@intel.com>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit af12e64ae0 upstream.
When calling of_parse_phandle_with_args(), the caller is responsible
to call of_node_put() to release the reference of device node.
In of_get_dml_pipe_index(), it does not release the reference.
Fixes: 9cb15142d0 ("mmc: mmci: Add qcom dml support to the driver.")
Signed-off-by: Felix Gu <gu_0233@qq.com>
Cc: stable@vger.kernel.org
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 079c24d569 upstream.
The rss_stat trace event allows userspace tools, like Perfetto [1], to
inspect per-process RSS metric changes over time.
The curr field was introduced to rss_stat in commit e4dcad204d
("rss_stat: add support to detect RSS updates of external mm"). Its
intent is to indicate whether the RSS update is for the mm_struct of the
current execution context; and is set to false when operating on a remote
mm_struct (e.g., via kswapd or a direct reclaimer).
However, an issue arises when a kernel thread temporarily adopts a user
process's mm_struct. Kernel threads do not have their own mm_struct and
normally have current->mm set to NULL. To operate on user memory, they
can "borrow" a memory context using kthread_use_mm(), which sets
current->mm to the user process's mm.
This can be observed, for example, in the USB Function Filesystem (FFS)
driver. The ffs_user_copy_worker() handles AIO completions and uses
kthread_use_mm() to copy data to a user-space buffer. If a page fault
occurs during this copy, the fault handler executes in the kthread's
context.
At this point, current is the kthread, but current->mm points to the user
process's mm. Since the rss_stat event (from the page fault) is for that
same mm, the condition current->mm == mm becomes true, causing curr to be
incorrectly set to true when the trace event is emitted.
This is misleading because it suggests the mm belongs to the kthread,
confusing userspace tools that track per-process RSS changes and
corrupting their mm_id-to-process association.
Fix this by ensuring curr is always false when the trace event is emitted
from a kthread context by checking for the PF_KTHREAD flag.
Link: https://lkml.kernel.org/r/20260219233708.1971199-1-kaleshsingh@google.com
Link: https://perfetto.dev/ [1]
Fixes: e4dcad204d ("rss_stat: add support to detect RSS updates of external mm")
Signed-off-by: Kalesh Singh <kaleshsingh@google.com>
Acked-by: Zi Yan <ziy@nvidia.com>
Acked-by: SeongJae Park <sj@kernel.org>
Reviewed-by: Pedro Falcato <pfalcato@suse.de>
Cc: "David Hildenbrand (Arm)" <david@kernel.org>
Cc: Joel Fernandes <joel@joelfernandes.org>
Cc: Lorenzo Stoakes <lorenzo.stoakes@oracle.com>
Cc: Minchan Kim <minchan@kernel.org>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Suren Baghdasaryan <surenb@google.com>
Cc: <stable@vger.kernel.org> [5.10+]
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 1be3b77de4 upstream.
mdc800_device_read() submits download_urb and waits for completion.
If the timeout fires and the device has not responded, the function
returns without killing the URB, leaving it active.
A subsequent read() resubmits the same URB while it is still
in-flight, triggering the WARN in usb_submit_urb():
"URB submitted while active"
Check the return value of wait_event_timeout() and kill the URB if
it indicates timeout, ensuring the URB is complete before its status
is inspected or the URB is resubmitted.
Similar to
- commit 372c931319 ("USB: yurex: fix control-URB timeout handling")
- commit b98d5000c5 ("media: rc: iguanair: handle timeouts")
Signed-off-by: Ziyi Guo <n7l8m4@u.northwestern.edu>
Cc: stable <stable@kernel.org>
Link: https://patch.msgid.link/20260209151937.2247202-1-n7l8m4@u.northwestern.edu
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 3cbc242b88 upstream.
In usbhs_remove(), the driver frees resources (including the pipe array)
while the interrupt handler (usbhs_interrupt) is still registered. If an
interrupt fires after usbhs_pipe_remove() but before the driver is fully
unbound, the ISR may access freed memory, causing a use-after-free.
Fix this by calling devm_free_irq() before freeing resources. This ensures
the interrupt handler is both disabled and synchronized (waits for any
running ISR to complete) before usbhs_pipe_remove() is called.
Fixes: f1407d5c66 ("usb: renesas_usbhs: Add Renesas USBHS common code")
Cc: stable <stable@kernel.org>
Suggested-by: Alan Stern <stern@rowland.harvard.edu>
Signed-off-by: Fan Wu <fanwu01@zju.edu.cn>
Link: https://patch.msgid.link/20260303073344.34577-1-fanwu01@zju.edu.cn
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 1015c27a5e upstream.
The usb_control_msg(), usb_bulk_msg(), and usb_interrupt_msg() APIs in
usbcore allow unlimited timeout durations. And since they use
uninterruptible waits, this leaves open the possibility of hanging a
task for an indefinitely long time, with no way to kill it short of
unplugging the target device.
To prevent this sort of problem, enforce a maximum limit on the length
of these unkillable timeouts. The limit chosen here, somewhat
arbitrarily, is 60 seconds. On many systems (although not all) this
is short enough to avoid triggering the kernel's hung-task detector.
In addition, clear up the ambiguity of negative timeout values by
treating them the same as 0, i.e., using the maximum allowed timeout.
Signed-off-by: Alan Stern <stern@rowland.harvard.edu>
Link: https://lore.kernel.org/linux-usb/3acfe838-6334-4f6d-be7c-4bb01704b33d@rowland.harvard.edu/
Fixes: 1da177e4c3 ("Linux-2.6.12-rc2")
CC: stable@vger.kernel.org
Link: https://patch.msgid.link/15fc9773-a007-47b0-a703-df89a8cf83dd@rowland.harvard.edu
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 8345b1539f upstream.
usb_role_switch_is_parent() was walking up to the parent node and checking
for the "usb-role-switch" property regardless of the type of the passed
fwnode. This could cause unrelated device nodes to be probed as potential
role switch parent, leading to spurious matches and "-EPROBE_DEFER" being
returned infinitely.
Till now only Type-B connector node will have a parent node which may
present "usb-role-switch" property and register the role switch device.
For Type-C connector node, its parent node will always be a Type-C chip
device which will never register the role switch device. However, it may
still present a non-boolean "usb-role-switch = <&usb_controller>" property
for historical compatibility.
So restrict the helper to only operate on Type-B connector when attempting
to get the role switch from parent node.
Fixes: 6fadd72943 ("usb: roles: get usb-role-switch from parent")
Cc: stable <stable@kernel.org>
Signed-off-by: Xu Yang <xu.yang_2@nxp.com>
Tested-by: Arnaud Ferraris <arnaud.ferraris@collabora.com>
Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Link: https://patch.msgid.link/20260309074313.2809867-3-xu.yang_2@nxp.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 14ae24cba2 upstream.
The CH343 USB/serial adapter is as buggy as it is popular (very).
One of its quirks is that despite being capable of signalling a
BREAK condition, it doesn't advertise it.
This used to work nonetheless until 66aad7d8d3 ("usb: cdc-acm:
return correct error code on unsupported break") applied some
reasonable restrictions, preventing breaks from being emitted on
devices that do not advertise CAP_BRK.
Add a quirk for this particular device, so that breaks can still
be produced on some of my machines attached to my console server.
Fixes: 66aad7d8d3 ("usb: cdc-acm: return correct error code on unsupported break")
Signed-off-by: Marc Zyngier <maz@kernel.org>
Cc: stable <stable@kernel.org>
Cc: Oliver Neukum <oneukum@suse.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Acked-by: Oliver Neukum <oneukum@suse.com>
Link: https://patch.msgid.link/20260301124440.1192752-1-maz@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit e293015ba7 upstream.
Remove the error path from the usb_phy_roothub_set_mode() function.
The code is clearly wrong, because phy_set_mode() calls can't be
balanced with phy_power_off() calls.
Additionally, the usb_phy_roothub_set_mode() function is called only
from usb_add_hcd() before it powers on the PHYs, so powering off those
makes no sense anyway.
Presumably, the code is copy-pasted from the phy_power_on() function
without adjusting the error handling.
Cc: stable@vger.kernel.org # v5.1+
Fixes: b97a313483 ("usb: core: comply to PHY framework")
Signed-off-by: Gabor Juhos <j4g8y7@gmail.com>
Reviewed-by: Miquel Raynal <miquel.raynal@bootlin.com>
Link: https://patch.msgid.link/20260218-usb-phy-poweroff-fix-v1-1-66e6831e860e@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Helge Deller
Sanman Pradhan
Catalin Marinas
Dave Airlie
Sven Eckelmann
Huiwen He
Jakub Staniszewski
Long Li
Ariel Silver
Luka Gejak
Greg Kroah-Hartman
Jedrzej Jagielski
Marc Zyngier
Andy Shevchenko
Franz Schnyder
Osama Abdelkader
Xu Yang
Xingui Yang
Yihang Li
Wang Shuaiwei
Adrian Ng Ho Yin
Steven Rostedt
Max Kellermann
Ilya Dryomov
Raphael Zimmer
Masami Hiramatsu (Google)
Mehul Rao
Ravi Hothi
Penghe Geng
Alexander Potapenko
Felix Gu
Kalesh Singh
Ziyi Guo
Oliver Neukum
Fan Wu
Alan Stern
Gabor Juhos