Pull ACPI fixes from Rafael Wysocki:
"These add a missing PCC check for guaranteed_perf in the ACPI CPPC
library and fix a static local variable access race condition in
acpi_pcc_address_space_setup() (Pengjie Zhang)"
* tag 'acpi-6.19-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
ACPI: PCC: Fix race condition by removing static qualifier
ACPI: CPPC: Fix missing PCC check for guaranteed_perf
Pull power management fixes from Rafael Wysocki:
"These fix three issues in the power capping code including one recent
regression and a runtime PM framework regression introduced during the
6.17 development cycle:
- Fix CPU hotplug locking deadlock reported by lockdep after a recent
update of the Intel RAPL power capping driver (Srinivas Pandruvada)
- Fix sscanf() error return value handling in the power capping core
and a race condition in register_control_type() (Sumeet Pawnikar)
- Fix a concurrent bit field update issue in the runtime PM core code
by only updating the bit field in question when runtime PM is
disabled (Rafael Wysocki)"
* tag 'pm-6.19-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
powercap: intel_rapl: Fix possible recursive lock warning
PM: runtime: Do not clear needs_force_resume with enabled runtime PM
powercap: fix sscanf() error return value handling
powercap: fix race condition in register_control_type()
Pull thermal control fixes from Rafael Wysocki:
"These enable a new hardware feature in the int340x thermal driver and
fix up comments in the thermal core code:
- Set a feature flag in the int340x thermal driver to enable the
power slider interface for Wildcat Lake processors (Srinivas
Pandruvada)
- Fix typo and indentation in comments in the thermal core (Thorsten
Blum)"
* tag 'thermal-6.19-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
thermal: core: Fix typo and indentation in comments
thermal: intel: int340x: Enable power slider interface for Wildcat Lake
Pull iommufd fixes from Jason Gunthorpe:
"A few minor fixes, other than the randconfig fix this is only relevant
to test code, not releases:
- Randconfig failure if CONFIG_DMA_SHARED_BUFFER is not set
- Remove gcc warning in kselftest
- Fix a refcount leak on an error path in the selftest support code
- Fix missing overflow checks in the selftest support code"
* tag 'for-linus-iommufd' of git://git.kernel.org/pub/scm/linux/kernel/git/jgg/iommufd:
iommufd/selftest: Check for overflow in IOMMU_TEST_OP_ADD_RESERVED
iommufd/selftest: Do not leak the hwpt if IOMMU_TEST_OP_MD_CHECK_MAP fails
iommufd/selftest: Make it clearer to gcc that the access is not out of bounds
iommufd: Fix building without dmabuf
Pull networking fixes from Paolo Abeni:
"Including fixes from netfilter and CAN.
Current release - regressions:
- netfilter: nf_conncount: fix leaked ct in error paths
- sched: act_mirred: fix loop detection
- sctp: fix potential deadlock in sctp_clone_sock()
- can: fix build dependency
- eth: mlx5e: do not update BQL of old txqs during channel
reconfiguration
Previous releases - regressions:
- sched: ets: always remove class from active list before deleting it
- inet: frags: flush pending skbs in fqdir_pre_exit()
- netfilter: nf_nat: remove bogus direction check
- mptcp:
- schedule rtx timer only after pushing data
- avoid deadlock on fallback while reinjecting
- can: gs_usb: fix error handling
- eth:
- mlx5e:
- avoid unregistering PSP twice
- fix double unregister of HCA_PORTS component
- bnxt_en: fix XDP_TX path
- mlxsw: fix use-after-free when updating multicast route stats
Previous releases - always broken:
- ethtool: avoid overflowing userspace buffer on stats query
- openvswitch: fix middle attribute validation in push_nsh() action
- eth:
- mlx5: fw_tracer, validate format string parameters
- mlxsw: spectrum_router: fix neighbour use-after-free
- ipvlan: ignore PACKET_LOOPBACK in handle_mode_l2()
Misc:
- Jozsef Kadlecsik retires from maintaining netfilter
- tools: ynl: fix build on systems with old kernel headers"
* tag 'net-6.19-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (83 commits)
net: hns3: add VLAN id validation before using
net: hns3: using the num_tqps to check whether tqp_index is out of range when vf get ring info from mbx
net: hns3: using the num_tqps in the vf driver to apply for resources
net: enetc: do not transmit redirected XDP frames when the link is down
selftests/tc-testing: Test case exercising potential mirred redirect deadlock
net/sched: act_mirred: fix loop detection
sctp: Clear inet_opt in sctp_v6_copy_ip_options().
sctp: Fetch inet6_sk() after setting ->pinet6 in sctp_clone_sock().
net/handshake: duplicate handshake cancellations leak socket
net/mlx5e: Don't include PSP in the hard MTU calculations
net/mlx5e: Do not update BQL of old txqs during channel reconfiguration
net/mlx5e: Trigger neighbor resolution for unresolved destinations
net/mlx5e: Use ip6_dst_lookup instead of ipv6_dst_lookup_flow for MAC init
net/mlx5: Serialize firmware reset with devlink
net/mlx5: fw_tracer, Handle escaped percent properly
net/mlx5: fw_tracer, Validate format string parameters
net/mlx5: Drain firmware reset in shutdown callback
net/mlx5: fw reset, clear reset requested on drain_fw_reset
net: dsa: mxl-gsw1xx: manually clear RANEG bit
net: dsa: mxl-gsw1xx: fix .shutdown driver operation
...
Pull smb client fixes from Steve French:
- important fix for reconnect problem
- minor cleanup
* tag 'v6.19-rc1-smb3-client-fixes' of git://git.samba.org/sfrench/cifs-2.6:
cifs: update internal module version number
smb: move some SMB1 definitions into common/smb1pdu.h
smb: align durable reconnect v2 context to 8 byte boundary
Pull fsnotify fixes from Jan Kara:
"Two fsnotify fixes.
The fix from Ahelenia makes sure we generate event when modifying
inode flags, the fix from Amir disables sending of events from device
inodes to their parent directory as it could concievably create a
usable side channel attack in case of some devices and so far we
aren't aware of anybody depending on the functionality"
* tag 'fsnotify_for_v6.19-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/jack/linux-fs:
fs: send fsnotify_xattr()/IN_ATTRIB from vfs_fileattr_set()/chattr(1)
fsnotify: do not generate ACCESS/MODIFY events on child for special files
Merge power capping fixes for 6.19-rc2:
- Fix CPU hotplug locking deadlock reported by lockdep after a recent
update of the Intel RAPL power capping driver (Srinivas Pandruvada)
- Fix sscanf() error return value handling in the power capping core
and a race condition in register_control_type() (Sumeet Pawnikar)
* pm-powercap:
powercap: intel_rapl: Fix possible recursive lock warning
powercap: fix sscanf() error return value handling
powercap: fix race condition in register_control_type()
Marc Kleine-Budde says:
====================
pull-request: can 2025-12-18
this is a pull request of 3 patches for net/main.
Tetsuo Handa contributes 2 patches to fix race windows in the j1939
protocol to properly handle disappearing network devices.
The last patch is by me, it fixes a build dependency with the CAN
drivers, that got introduced while fixing a dependency between the CAN
protocol and CAN device code.
linux-can-fixes-for-6.19-20251218
* tag 'linux-can-fixes-for-6.19-20251218' of git://git.kernel.org/pub/scm/linux/kernel/git/mkl/linux-can:
can: fix build dependency
can: j1939: make j1939_sk_bind() fail if device is no longer registered
can: j1939: make j1939_session_activate() fail if device is no longer registered
====================
Link: https://patch.msgid.link/20251218123132.664533-1-mkl@pengutronix.de
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Currently, the VLAN id may be used without validation when
receive a VLAN configuration mailbox from VF. The length of
vlan_del_fail_bmap is BITS_TO_LONGS(VLAN_N_VID). It may cause
out-of-bounds memory access once the VLAN id is bigger than
or equal to VLAN_N_VID.
Therefore, VLAN id needs to be checked to ensure it is within
the range of VLAN_N_VID.
Fixes: fe4144d47e ("net: hns3: sync VLAN filter entries when kill VLAN ID failed")
Signed-off-by: Jian Shen <shenjian15@huawei.com>
Signed-off-by: Jijie Shao <shaojijie@huawei.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20251211023737.2327018-4-shaojijie@huawei.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Currently, rss_size = num_tqps / tc_num. If tc_num is 1, then num_tqps
equals rss_size. However, if the tc_num is greater than 1, then rss_size
will be less than num_tqps, causing the tqp_index check for subsequent TCs
using rss_size to always fail.
This patch uses the num_tqps to check whether tqp_index is out of range,
instead of rss_size.
Fixes: 326334aad0 ("net: hns3: add a check for tqp_index in hclge_get_ring_chain_from_mbx()")
Signed-off-by: Jian Shen <shenjian15@huawei.com>
Signed-off-by: Jijie Shao <shaojijie@huawei.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20251211023737.2327018-3-shaojijie@huawei.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Currently, hdev->htqp is allocated using hdev->num_tqps, and kinfo->tqp
is allocated using kinfo->num_tqps. However, kinfo->num_tqps is set to
min(new_tqps, hdev->num_tqps); Therefore, kinfo->num_tqps may be smaller
than hdev->num_tqps, which causes some hdev->htqp[i] to remain
uninitialized in hclgevf_knic_setup().
Thus, this patch allocates hdev->htqp and kinfo->tqp using hdev->num_tqps,
ensuring that the lengths of hdev->htqp and kinfo->tqp are consistent
and that all elements are properly initialized.
Fixes: e2cb1dec97 ("net: hns3: Add HNS3 VF HCL(Hardware Compatibility Layer) Support")
Signed-off-by: Jian Shen <shenjian15@huawei.com>
Signed-off-by: Jijie Shao <shaojijie@huawei.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20251211023737.2327018-2-shaojijie@huawei.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
In the current implementation, the enetc_xdp_xmit() always transmits
redirected XDP frames even if the link is down, but the frames cannot
be transmitted from TX BD rings when the link is down, so the frames
are still kept in the TX BD rings. If the XDP program is uninstalled,
users will see the following warning logs.
fsl_enetc 0000:00:00.0 eno0: timeout for tx ring #6 clear
More worse, the TX BD ring cannot work properly anymore, because the
HW PIR and CIR are not equal after the re-initialization of the TX
BD ring. At this point, the BDs between CIR and PIR are invalid,
which will cause a hardware malfunction.
Another reason is that there is internal context in the ring prefetch
logic that will retain the state from the first incarnation of the ring
and continue prefetching from the stale location when we re-initialize
the ring. The internal context is only reset by an FLR. That is to say,
for LS1028A ENETC, software cannot set the HW CIR and PIR when
initializing the TX BD ring.
It does not make sense to transmit redirected XDP frames when the link is
down. Add a link status check to prevent transmission in this condition.
This fixes part of the issue, but more complex cases remain. For example,
the TX BD ring may still contain unsent frames when the link goes down.
Those situations require additional patches, which will build on this
one.
Fixes: 9d2b68cc10 ("net: enetc: add support for XDP_REDIRECT")
Signed-off-by: Wei Fang <wei.fang@nxp.com>
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Reviewed-by: Hariprasad Kelam <hkelam@marvell.com>
Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Link: https://patch.msgid.link/20251211020919.121113-1-wei.fang@nxp.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
When a handshake request is cancelled it is removed from the
handshake_net->hn_requests list, but it is still present in the
handshake_rhashtbl until it is destroyed.
If a second cancellation request arrives for the same handshake request,
then remove_pending() will return false... and assuming
HANDSHAKE_F_REQ_COMPLETED isn't set in req->hr_flags, we'll continue
processing through the out_true label, where we put another reference on
the sock and a refcount underflow occurs.
This can happen for example if a handshake times out - particularly if
the SUNRPC client sends the AUTH_TLS probe to the server but doesn't
follow it up with the ClientHello due to a problem with tlshd. When the
timeout is hit on the server, the server will send a FIN, which triggers
a cancellation request via xs_reset_transport(). When the timeout is
hit on the client, another cancellation request happens via
xs_tls_handshake_sync().
Add a test_and_set_bit(HANDSHAKE_F_REQ_COMPLETED) in the pending cancel
path so duplicate cancels can be detected.
Fixes: 3b3009ea8a ("net/handshake: Create a NETLINK service for handling handshake requests")
Suggested-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Scott Mayhew <smayhew@redhat.com>
Reviewed-by: Chuck Lever <chuck.lever@oracle.com>
Link: https://patch.msgid.link/20251209193015.3032058-1-smayhew@redhat.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Florian Westphal says:
====================
netfilter: updates for net
The following patchset contains Netfilter fixes for *net*:
1) Jozsef Kadlecsik is retiring. Fortunately Jozsef will still keep an
eye on ipset patches.
2) remove a bogus direction check from nat core, this caused spurious
flakes in the 'reverse clash' selftest, from myself.
3) nf_tables doesn't need to do chain validation on register store,
from Pablo Neira Ayuso.
4) nf_tables shouldn't revisit chains during ruleset (graph) validation
if possible. Both 3 and 4 were slated for -next initially but there
are now two independent reports of people hitting soft lockup errors
during ruleset validation, so it makes no sense anymore to route
this via -next given this is -stable material. From myself.
5) call cond_resched() in a more frequently visited place during nf_tables
chain validation, this wasn't possible earlier due to rcu read lock,
but nowadays its not held anymore during set walks.
6) Don't fail conntrack packetdrill test with HZ=100 kernels.
netfilter pull request nf-25-12-16
* tag 'nf-25-12-16' of https://git.kernel.org/pub/scm/linux/kernel/git/netfilter/nf:
selftests: netfilter: packetdrill: avoid failure on HZ=100 kernel
netfilter: nf_tables: avoid softlockup warnings in nft_chain_validate
netfilter: nf_tables: avoid chain re-validation if possible
netfilter: nf_tables: remove redundant chain validation on register store
netfilter: nf_nat: remove bogus direction check
MAINTAINERS: Remove Jozsef Kadlecsik from MAINTAINERS file
====================
Link: https://patch.msgid.link/20251216190904.14507-1-fw@strlen.de
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Commit [1] added the 40 bytes required by the PSP header+trailer and the
UDP header to MLX5E_ETH_HARD_MTU, which limits the device-wide max
software MTU that could be set. This is not okay, because most packets
are not PSP packets and it doesn't make sense to always reserve space
for headers which won't get added in most cases.
As it turns out, for TCP connections, PSP overhead is already taken into
account in the TCP MSS calculations via inet_csk(sk)->icsk_ext_hdr_len.
This was added in commit [2]. This means that the extra space reserved
in the hard MTU for mlx5 ends up unused and wasted.
Remove the unnecessary 40 byte reservation from hard MTU.
[1] commit e5a1861a29 ("net/mlx5e: Implement PSP Tx data path")
[2] commit e97269257f ("net: psp: update the TCP MSS to reflect PSP
packet overhead")
Fixes: e5a1861a29 ("net/mlx5e: Implement PSP Tx data path")
Signed-off-by: Cosmin Ratiu <cratiu@nvidia.com>
Reviewed-by: Shahar Shitrit <shshitrit@nvidia.com>
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Link: https://patch.msgid.link/1765284977-1363052-10-git-send-email-tariqt@nvidia.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
During channel reconfiguration (e.g., ethtool private flags changes),
the driver can trigger a kernel BUG_ON in dql_completed() with the error
"kernel BUG at lib/dynamic_queue_limits.c:99".
The issue occurs in the following sequence:
During mlx5e_safe_switch_params(), old channels are deactivated via
mlx5e_deactivate_txqsq(). New channels are created and activated, taking
ownership of the netdev_queues and their BQL state.
When old channels are closed via mlx5e_close_txqsq(), there may be
pending TX descriptors (sq->cc != sq->pc) that were in-flight during the
deactivation.
mlx5e_free_txqsq_descs() frees these pending descriptors and attempts to
complete them via netdev_tx_completed_queue().
However, the BQL state (dql->num_queued and dql->num_completed) have
been reset in mlx5e_activate_txqsq and belong to the new queue owner,
leading to dql->num_queued - dql->num_completed < nbytes.
This triggers BUG_ON(count > num_queued - num_completed) in
dql_completed().
Fixes: 3b88a535a8 ("net/mlx5e: Defer channels closure to reduce interface down time")
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Signed-off-by: William Tu <witu@nvidia.com>
Reviewed-by: Dragos Tatulea <dtatulea@nvidia.com>
Link: https://patch.msgid.link/1765284977-1363052-9-git-send-email-tariqt@nvidia.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
When initializing the MAC addresses for an outbound IPsec packet offload
rule in mlx5e_ipsec_init_macs, the call to dst_neigh_lookup is used to
find the next-hop neighbor (typically the gateway in tunnel mode).
This call might create a new neighbor entry if one doesn't already
exist. This newly created entry starts in the INCOMPLETE state, as the
kernel hasn't yet sent an ARP or NDISC probe to resolve the MAC
address. In this case, neigh_ha_snapshot will correctly return an
all-zero MAC address.
IPsec packet offload requires the actual next-hop MAC address to
program the rule correctly. If the neighbor state is INCOMPLETE when
the rule is created, the hardware rule is programmed with an all-zero
destination MAC address. Packets sent using this rule will be
subsequently dropped by the receiving network infrastructure or host.
This patch adds a check specifically for the outbound offload path. If
neigh_ha_snapshot returns an all-zero MAC address, it proactively
calls neigh_event_send(n, NULL). This ensures the kernel immediately
sends the initial ARP or NDISC probe if one isn't already pending,
accelerating the resolution process. This helps prevent the hardware
rule from being programmed with an invalid MAC address and avoids
packet drops due to unresolved neighbors.
Fixes: 71670f766b ("net/mlx5e: Support routed networks during IPsec MACs initialization")
Signed-off-by: Jianbo Liu <jianbol@nvidia.com>
Reviewed-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Link: https://patch.msgid.link/1765284977-1363052-8-git-send-email-tariqt@nvidia.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Replace ipv6_stub->ipv6_dst_lookup_flow() with ip6_dst_lookup() in
mlx5e_ipsec_init_macs() since IPsec transformations are not needed
during Security Association setup - only basic routing information is
required for nexthop MAC address resolution.
This resolves an issue where XfrmOutNoStates error counter would be
incremented when xfrm policy is configured before xfrm state, as the
IPsec-aware routing function would attempt policy checks during SA
initialization.
Fixes: 71670f766b ("net/mlx5e: Support routed networks during IPsec MACs initialization")
Signed-off-by: Jianbo Liu <jianbol@nvidia.com>
Reviewed-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Link: https://patch.msgid.link/1765284977-1363052-7-git-send-email-tariqt@nvidia.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
The firmware reset mechanism can be triggered by asynchronous events,
which may race with other devlink operations like devlink reload or
devlink dev eswitch set, potentially leading to inconsistent states.
This patch addresses the race by using the devl_lock to serialize the
firmware reset against other devlink operations. When a reset is
requested, the driver attempts to acquire the lock. If successful, it
sets a flag to block devlink reload or eswitch changes, ACKs the reset
to firmware and then releases the lock. If the lock is already held by
another operation, the driver NACKs the firmware reset request,
indicating that the reset cannot proceed.
Firmware reset does not keep the devl_lock and instead uses an internal
firmware reset bit. This is because firmware resets can be triggered by
asynchronous events, and processed in different threads. It is illegal
and unsafe to acquire a lock in one thread and attempt to release it in
another, as lock ownership is intrinsically thread-specific.
This change ensures that firmware resets and other devlink operations
are mutually exclusive during the critical reset request phase,
preventing race conditions.
Fixes: 38b9f903f2 ("net/mlx5: Handle sync reset request event")
Signed-off-by: Shay Drory <shayd@nvidia.com>
Reviewed-by: Mateusz Berezecki <mberezecki@nvidia.com>
Reviewed-by: Moshe Shemesh <moshe@nvidia.com>
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Link: https://patch.msgid.link/1765284977-1363052-6-git-send-email-tariqt@nvidia.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Add validation for format string parameters in the firmware tracer to
prevent potential security vulnerabilities and crashes from malformed
format strings received from firmware.
The firmware tracer receives format strings from the device firmware and
uses them to format trace messages. Without proper validation, bad
firmware could provide format strings with invalid format specifiers
(e.g., %s, %p, %n) that could lead to crashes, or other undefined
behavior.
Add mlx5_tracer_validate_params() to validate that all format specifiers
in trace strings are limited to safe integer/hex formats (%x, %d, %i,
%u, %llx, %lx, etc.). Reject strings containing other format types that
could be used to access arbitrary memory or cause crashes.
Invalid format strings are added to the trace output for visibility with
"BAD_FORMAT: " prefix.
Fixes: 70dd6fdb89 ("net/mlx5: FW tracer, parse traces and kernel tracing support")
Signed-off-by: Shay Drory <shayd@nvidia.com>
Reviewed-by: Moshe Shemesh <moshe@nvidia.com>
Reported-by: Breno Leitao <leitao@debian.org>
Closes: https://lore.kernel.org/netdev/hanz6rzrb2bqbplryjrakvkbmv4y5jlmtthnvi3thg5slqvelp@t3s3erottr6s/
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Link: https://patch.msgid.link/1765284977-1363052-4-git-send-email-tariqt@nvidia.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
drain_fw_reset() waits for ongoing firmware reset events and blocks new
event handling, but does not clear the reset requested flag, and may
keep sync reset polling.
To fix it, call mlx5_sync_reset_clear_reset_requested() to clear the
flag, stop sync reset polling, and resume health polling, ensuring
health issues are still detected after the firmware reset drain.
Fixes: 16d42d3133 ("net/mlx5: Drain fw_reset when removing device")
Signed-off-by: Moshe Shemesh <moshe@nvidia.com>
Reviewed-by: Shay Drori <shayd@nvidia.com>
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Link: https://patch.msgid.link/1765284977-1363052-2-git-send-email-tariqt@nvidia.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Daniel Golle says:
====================
net: dsa: lantiq: a bunch of fixes
This series is the continuation and result of comments received for a fix
for the SGMII restart-an bit not actually being self-clearing, which was
reported by by Rasmus Villemoes.
A closer investigation and testing the .remove and the .shutdown paths
of the mxl-gsw1xx.c and lantiq_gswip.c drivers has revealed a couple of
existing problems, which are also addressed in this series.
====================
Link: https://patch.msgid.link/cover.1765241054.git.daniel@makrotopia.org
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Despite being documented as self-clearing, the RANEG bit sometimes
remains set, preventing auto-negotiation from happening.
Manually clear the RANEG bit after 10ms as advised by MaxLinear.
In order to not hold RTNL during the 10ms of waiting schedule
delayed work to take care of clearing the bit asynchronously, which
is similar to the self-clearing behavior.
Fixes: 22335939ec ("net: dsa: add driver for MaxLinear GSW1xx switch family")
Reported-by: Rasmus Villemoes <ravi@prevas.dk>
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
Link: https://patch.msgid.link/76745fceb5a3f53088110fb7a96acf88434088ca.1765241054.git.daniel@makrotopia.org
Reviewed-by: Vladimir Oltean <olteanv@gmail.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
The .shutdown operation should call dsa_switch_shutdown() just like
it is done also by the sibling lantiq_gswip driver. Not doing that
results in shutdown or reboot hanging and waiting for the CPU port
becoming free, which introduces a longer delay and a WARNING before
shutdown or reboot in case the driver is built-into the kernel.
Fix this by calling dsa_switch_shutdown() in the driver's shutdown
operation, harmonizing it with what is done in the lantiq_gswip
driver. As a side-effect this now allows to remove the previously
exported gswip_disable_switch() function which no longer got any
users.
Fixes: 22335939ec ("net: dsa: add driver for MaxLinear GSW1xx switch family")
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
Link: https://patch.msgid.link/77ed91a5206e5dbf5d3e83d7e364ebfda90d31fd.1765241054.git.daniel@makrotopia.org
Reviewed-by: Vladimir Oltean <olteanv@gmail.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
The driver's .remove operation was calling gswip_disable_switch() which
clears the GSWIP_MDIO_GLOB_ENABLE bit before calling
dsa_unregister_switch() and thereby violating a Golden Rule of driver
development to always unpublish userspace interfaces before disabling
hardware, as pointed out by Russell King.
Fix this by relying in GSWIP_MDIO_GLOB_ENABLE being cleared by the
.teardown operation introduced by the previous commit
("net: dsa: lantiq_gswip: fix teardown order").
Fixes: 22335939ec ("net: dsa: add driver for MaxLinear GSW1xx switch family")
Suggested-by: "Russell King (Oracle)" <linux@armlinux.org.uk>
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
Link: https://patch.msgid.link/63f882eeb910cf24503c35a443b541cc54a930f2.1765241054.git.daniel@makrotopia.org
Reviewed-by: Vladimir Oltean <olteanv@gmail.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Russell King pointed out that disabling the switch by clearing
GSWIP_MDIO_GLOB_ENABLE before calling dsa_unregister_switch() is
problematic, as it violates a Golden Rule of driver development to
always first unpublish userspace interfaces and then disable the
hardware.
Fix this, and also simplify the probe() function, by introducing a
dsa_switch_ops teardown() operation which takes care of clearing the
GSWIP_MDIO_GLOB_ENABLE bit.
Fixes: 14fceff477 ("net: dsa: Add Lantiq / Intel DSA driver for vrx200")
Suggested-by: "Russell King (Oracle)" <linux@armlinux.org.uk>
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
Link: https://patch.msgid.link/4ebd72a29edc1e4059b9666a26a0bb5d906a829a.1765241054.git.daniel@makrotopia.org
Reviewed-by: Vladimir Oltean <olteanv@gmail.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
The ethtool -S command operates across three ioctl calls:
ETHTOOL_GSSET_INFO for the size, ETHTOOL_GSTRINGS for the names, and
ETHTOOL_GSTATS for the values.
If the number of stats changes between these calls (e.g., due to device
reconfiguration), userspace's buffer allocation will be incorrect,
potentially leading to buffer overflow.
Drivers are generally expected to maintain stable stat counts, but some
drivers (e.g., mlx5, bnx2x, bna, ksz884x) use dynamic counters, making
this scenario possible.
Some drivers try to handle this internally:
- bnad_get_ethtool_stats() returns early in case stats.n_stats is not
equal to the driver's stats count.
- micrel/ksz884x also makes sure not to write anything beyond
stats.n_stats and overflow the buffer.
However, both use stats.n_stats which is already assigned with the value
returned from get_sset_count(), hence won't solve the issue described
here.
Change ethtool_get_strings(), ethtool_get_stats(),
ethtool_get_phy_stats() to not return anything in case of a mismatch
between userspace's size and get_sset_size(), to prevent buffer
overflow.
The returned n_stats value will be equal to zero, to reflect that
nothing has been returned.
This could result in one of two cases when using upstream ethtool,
depending on when the size change is detected:
1. When detected in ethtool_get_strings():
# ethtool -S eth2
no stats available
2. When detected in get stats, all stats will be reported as zero.
Both cases are presumably transient, and a subsequent ethtool call
should succeed.
Other than the overflow avoidance, these two cases are very evident (no
output/cleared stats), which is arguably better than presenting
incorrect/shifted stats.
I also considered returning an error instead of a "silent" response, but
that seems more destructive towards userspace apps.
Notes:
- This patch does not claim to fix the inherent race, it only makes sure
that we do not overflow the userspace buffer, and makes for a more
predictable behavior.
- RTNL lock is held during each ioctl, the race window exists between
the separate ioctl calls when the lock is released.
- Userspace ethtool always fills stats.n_stats, but it is likely that
these stats ioctls are implemented in other userspace applications
which might not fill it. The added code checks that it's not zero,
to prevent any regressions.
Fixes: 1da177e4c3 ("Linux-2.6.12-rc2")
Reviewed-by: Dragos Tatulea <dtatulea@nvidia.com>
Reviewed-by: Tariq Toukan <tariqt@nvidia.com>
Signed-off-by: Gal Pressman <gal@nvidia.com>
Link: https://patch.msgid.link/20251208121901.3203692-1-gal@nvidia.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
There is a theoretical race window in j1939_sk_netdev_event_unregister()
where two j1939_sk_bind() calls jump in between read_unlock_bh() and
lock_sock().
The assumption jsk->priv == priv can fail if the first j1939_sk_bind()
call once made jsk->priv == NULL due to failed j1939_local_ecu_get() call
and the second j1939_sk_bind() call again made jsk->priv != NULL due to
successful j1939_local_ecu_get() call.
Since the socket lock is held by both j1939_sk_netdev_event_unregister()
and j1939_sk_bind(), checking ndev->reg_state with the socket lock held can
reliably make the second j1939_sk_bind() call fail (and close this race
window).
Fixes: 7fcbe5b2c6 ("can: j1939: implement NETDEV_UNREGISTER notification handler")
Signed-off-by: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
Acked-by: Oleksij Rempel <o.rempel@pengutronix.de>
Link: https://patch.msgid.link/5732921e-247e-4957-a364-da74bd7031d7@I-love.SAKURA.ne.jp
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Pull bpf fixes from Alexei Starovoitov:
- Fix BPF builds due to -fms-extensions. selftests (Alexei
Starovoitov), bpftool (Quentin Monnet).
- Fix build of net/smc when CONFIG_BPF_SYSCALL=y, but CONFIG_BPF_JIT=n
(Geert Uytterhoeven)
- Fix livepatch/BPF interaction and support reliable unwinding through
BPF stack frames (Josh Poimboeuf)
- Do not audit capability check in arm64 JIT (Ondrej Mosnacek)
- Fix truncated dmabuf BPF iterator reads (T.J. Mercier)
- Fix verifier assumptions of bpf_d_path's output buffer (Shuran Liu)
- Fix warnings in libbpf when built with -Wdiscarded-qualifiers under
C23 (Mikhail Gavrilov)
* tag 'bpf-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf:
selftests/bpf: add regression test for bpf_d_path()
bpf: Fix verifier assumptions of bpf_d_path's output buffer
selftests/bpf: Add test for truncated dmabuf_iter reads
bpf: Fix truncated dmabuf iterator reads
x86/unwind/orc: Support reliable unwinding through BPF stack frames
bpf: Add bpf_has_frame_pointer()
bpf, arm64: Do not audit capability check in do_jit()
libbpf: Fix -Wdiscarded-qualifiers under C23
bpftool: Fix build warnings due to MS extensions
net: smc: SMC_HS_CTRL_BPF should depend on BPF_JIT
selftests/bpf: Add -fms-extensions to bpf build flags
Pull s390 fixes from Alexander Gordeev:
- clear 'Search boot program' flag when 'bootprog' sysfs file is
written to override a value set from Hardware Management Console
- fix cyclic dead-lock in zpci_zdev_put() and zpci_scan_devices()
functions when triggering PCI device recovery using sysfs
- annotate the expected lock context imbalance in zpci_release_device()
function to fix a sparse complaint
- fix the logic to fallback to the return address register value in the
topmost frame when stack tracing uses a back chain
* tag 's390-6.19-3' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux:
s390/stacktrace: Do not fallback to RA register
s390/pci: Annotate lock context imbalance in zpci_release_device()
s390/pci: Fix cyclic dead-lock in zpci_zdev_put() and zpci_scan_devices()
s390/ipl: Clear SBP flag when bootprog is set
Add a 4-byte Pad to create_durable_handle_reconnect_v2 so the DH2C
create context is 8 byte aligned.
This avoids malformed CREATE contexts on reconnect.
Recent change removed this Padding, adding it back.
Fixes: 81a45de432 ("smb: move create_durable_handle_reconnect_v2 to common/smb2pdu.h")
Signed-off-by: Bharath SM <bharathsm@microsoft.com>
Reviewed-by: Paulo Alcantara (Red Hat) <pc@manguebit.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
Pull shmem rename fixes from Al Viro:
"A couple of shmem rename fixes - recent regression from tree-in-dcache
series and older breakage from stable directory offsets stuff"
* tag 'pull-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
shmem: fix recovery on rename failures
shmem_whiteout(): fix regression from tree-in-dcache series
Pull smb server fixes from Steve French:
- Fix set xattr name validation
- Fix session refcount leak
- Minor cleanup
- smbdirect (RDMA) fixes: improve receive completion, and connect
* tag 'v6.19-rc1-ksmbd-server-fixes' of git://git.samba.org/ksmbd:
ksmbd: fix buffer validation by including null terminator size in EA length
ksmbd: Fix refcount leak when invalid session is found on session lookup
ksmbd: remove redundant DACL check in smb_check_perm_dacl
ksmbd: convert comma to semicolon
smb: server: defer the initial recv completion logic to smb_direct_negotiate_recv_work()
smb: server: initialize recv_io->cqe.done = recv_done just once
smb: smbdirect: introduce smbdirect_socket.connect.{lock,work}
Linus Torvalds
Rafael J. Wysocki
Paolo Abeni
Jian Shen
Wei Fang
Victor Nogueira
Jamal Hadi Salim
Kuniyuki Iwashima
Scott Mayhew
Cosmin Ratiu
Tariq Toukan
Jianbo Liu
Shay Drory
Moshe Shemesh
Daniel Golle
Gal Pressman
Marc Kleine-Budde
Srinivas Pandruvada
Tetsuo Handa
Steve French
ZhangGuoDong
Bharath SM
Jason Gunthorpe