commit afbf75e8da upstream.
The longest running netdevsim test, nexthop.sh, currently takes
5 min to finish. Around 260s to be exact, and 310s on a debug kernel.
The default timeout in selftest is 45sec, so we need an explicit
config. Give ourselves some headroom and use 10min.
Commit under Fixes isn't really to "blame" but prior to that
netdevsim tests weren't integrated with kselftest infra
so blaming the tests themselves doesn't seem right, either.
Fixes: 8ff25dac88 ("netdevsim: add Makefile for selftests")
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit d01f8136d4 ]
The script "ethtool-common.sh" is not installed in INSTALL_PATH, and
triggers some errors when I try to run the test
'drivers/net/netdevsim/ethtool-coalesce.sh':
TAP version 13
1..1
# timeout set to 600
# selftests: drivers/net/netdevsim: ethtool-coalesce.sh
# ./ethtool-coalesce.sh: line 4: ethtool-common.sh: No such file or directory
# ./ethtool-coalesce.sh: line 25: make_netdev: command not found
# ethtool: bad command line argument(s)
# ./ethtool-coalesce.sh: line 124: check: command not found
# ./ethtool-coalesce.sh: line 126: [: -eq: unary operator expected
# FAILED /0 checks
not ok 1 selftests: drivers/net/netdevsim: ethtool-coalesce.sh # exit=1
Install this file to avoid this error. After this patch:
TAP version 13
1..1
# timeout set to 600
# selftests: drivers/net/netdevsim: ethtool-coalesce.sh
# PASSED all 22 checks
ok 1 selftests: drivers/net/netdevsim: ethtool-coalesce.sh
Fixes: fbb8531e58 ("selftests: extract common functions in ethtool-common.sh")
Signed-off-by: Wang Liang <wangliang74@huawei.com>
Link: https://patch.msgid.link/20251030040340.3258110-1-wangliang74@huawei.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit f8e8486702 ]
The GRO self-test, gro.c, currently constructs IPv6 packets containing a
Hop-by-Hop Options header (IPPROTO_HOPOPTS) to ensure the GRO path
correctly handles IPv6 extension headers.
However, network elements may be configured to drop packets with the
Hop-by-Hop Options header (HBH). This causes the self-test to fail
in environments where such network elements are present.
To improve the robustness and reliability of this test in diverse
network environments, switch from using IPPROTO_HOPOPTS to
IPPROTO_DSTOPTS (Destination Options).
The Destination Options header is less likely to be dropped by
intermediate routers and still serves the core purpose of the test:
validating GRO's handling of an IPv6 extension header. This change
ensures the test can execute successfully without being incorrectly
failed by network policies outside the kernel's control.
Fixes: 7d1575014a ("selftests/net: GRO coalesce test")
Reviewed-by: Willem de Bruijn <willemb@google.com>
Signed-off-by: Anubhav Singh <anubhavsinggh@google.com>
Link: https://patch.msgid.link/20251030060436.1556664-1-anubhavsinggh@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 4e321d590c ]
Currently there is no test which checks that IPv6 extension header packets
successfully coalesce. This commit adds a test, which verifies two IPv6
packets with HBH extension headers do coalesce, and another test which
checks that packets with different extension header data do not coalesce
in GRO.
I changed the receive socket filter to accept a packet with one extension
header. This change exposed a bug in the fragment test -- the old BPF did
not accept the fragment packet. I updated correct_num_packets in the
fragment test accordingly.
Signed-off-by: Richard Gobert <richardbgobert@gmail.com>
Reviewed-by: Willem de Bruijn <willemb@google.com>
Link: https://lore.kernel.org/r/69282fed-2415-47e8-b3d3-34939ec3eb56@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Stable-dep-of: f8e8486702 ("selftests/net: use destination options instead of hop-by-hop")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 02d064de05 ]
Due to the gro_sender sending data packets and FIN packets
in very quick succession, these are received almost simultaneously
by the gro_receiver. FIN packets are sometimes processed before the
data packets leading to intermittent (~1/100) test failures.
This change adds a delay of 100ms before sending FIN packets
in gro:tcp test to avoid the out-of-order delivery. The same
mitigation already exists for the gro:ip test.
Fixes: 7d1575014a ("selftests/net: GRO coalesce test")
Reviewed-by: Willem de Bruijn <willemb@google.com>
Signed-off-by: Anubhav Singh <anubhavsinggh@google.com>
Link: https://patch.msgid.link/20251030062818.1562228-1-anubhavsinggh@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 47efbac9b7 ]
Use require_command() so that the test will return SKIP (4) when a
required command is not present.
Before:
# ./traceroute.sh
SKIP: Could not run IPV6 test without traceroute6
SKIP: Could not run IPV4 test without traceroute
$ echo $?
0
After:
# ./traceroute.sh
TEST: traceroute6 not installed [SKIP]
$ echo $?
4
Reviewed-by: Petr Machata <petrm@nvidia.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Link: https://patch.msgid.link/20250908073238.119240-6-idosch@nvidia.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit bc4c0a48bd ]
The get_next_frame() function in psock_tpacket.c was missing a return
statement in its default switch case, leading to a compiler warning.
This was caused by a `bug_on(1)` call, which is defined as an
`assert()`, being compiled out because NDEBUG is defined during the
build.
Instead of adding a `return NULL;` which would silently hide the error
and could lead to crashes later, this change restores the original
author's intent. By adding `#undef NDEBUG` before including <assert.h>,
we ensure the assertion is active and will cause the test to abort if
this unreachable code is ever executed.
Signed-off-by: Wake Liu <wakel@google.com>
Link: https://patch.msgid.link/20250809062013.2407822-1-wakel@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit c36748e873 ]
The `__WORDSIZE` macro, defined in the non-standard `<bits/wordsize.h>`
header, is a GNU extension and not universally available with all
toolchains, such as Clang when used with musl libc.
This can lead to build failures in environments where this header is
missing.
The intention of the code is to determine the bit width of a C `long`.
Replace the non-portable `__WORDSIZE` with the standard and portable
`sizeof(long) * 8` expression to achieve the same result.
This change also removes the inclusion of the now-unused
`<bits/wordsize.h>` header.
Signed-off-by: Wake Liu <wakel@google.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
commit 008385efd0 upstream.
The previous commit adds an exception for the C-flag case. The
'mptcp_join.sh' selftest is extended to validate this case.
In this subtest, there is a typical CDN deployment with a client where
MPTCP endpoints have been 'automatically' configured:
- the server set net.mptcp.allow_join_initial_addr_port=0
- the client has multiple 'subflow' endpoints, and the default limits:
not accepting ADD_ADDRs.
Without the parent patch, the client is not able to establish new
subflows using its 'subflow' endpoints. The parent commit fixes that.
The 'Fixes' tag here below is the same as the one from the previous
commit: this patch here is not fixing anything wrong in the selftests,
but it validates the previous fix for an issue introduced by this commit
ID.
Fixes: df377be387 ("mptcp: add deny_join_id0 in mptcp_options_received")
Cc: stable@vger.kernel.org
Reviewed-by: Geliang Tang <geliang@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://patch.msgid.link/20250925-net-next-mptcp-c-flag-laminar-v1-2-ad126cc47c6b@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
[ Conflicts in mptcp_join.sh, because many different helpers have been
modified in newer kernel versions, e.g. in commit 03668c65d1
("selftests: mptcp: join: rework detailed report"), or commit
985de45923 ("selftests: mptcp: centralize stats dumping"), etc.
Adaptations have been made to use the old way, similar to what is done
just above. ]
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 1a251f52cf ]
This just standardizes the use of MIN() and MAX() macros, with the very
traditional semantics. The goal is to use these for C constant
expressions and for top-level / static initializers, and so be able to
simplify the min()/max() macros.
These macro names were used by various kernel code - they are very
traditional, after all - and all such users have been fixed up, with a
few different approaches:
- trivial duplicated macro definitions have been removed
Note that 'trivial' here means that it's obviously kernel code that
already included all the major kernel headers, and thus gets the new
generic MIN/MAX macros automatically.
- non-trivial duplicated macro definitions are guarded with #ifndef
This is the "yes, they define their own versions, but no, the include
situation is not entirely obvious, and maybe they don't get the
generic version automatically" case.
- strange use case #1
A couple of drivers decided that the way they want to describe their
versioning is with
#define MAJ 1
#define MIN 2
#define DRV_VERSION __stringify(MAJ) "." __stringify(MIN)
which adds zero value and I just did my Alexander the Great
impersonation, and rewrote that pointless Gordian knot as
#define DRV_VERSION "1.2"
instead.
- strange use case #2
A couple of drivers thought that it's a good idea to have a random
'MIN' or 'MAX' define for a value or index into a table, rather than
the traditional macro that takes arguments.
These values were re-written as C enum's instead. The new
function-line macros only expand when followed by an open
parenthesis, and thus don't clash with enum use.
Happily, there weren't really all that many of these cases, and a lot of
users already had the pattern of using '#ifndef' guarding (or in one
case just using '#undef MIN') before defining their own private version
that does the same thing. I left such cases alone.
Cc: David Laight <David.Laight@aculab.com>
Cc: Lorenzo Stoakes <lorenzo.stoakes@oracle.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Eliav Farber <farbere@amazon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit a001cd248a upstream.
Add "extern" to the glibc-defined weak rseq symbols to convert the rseq
selftest's usage from weak symbol definitions to weak symbol _references_.
Effectively re-defining the glibc symbols wreaks havoc when building with
-fno-common, e.g. generates segfaults when running multi-threaded programs,
as dynamically linked applications end up with multiple versions of the
symbols.
Building with -fcommon, which until recently has the been the default for
GCC and clang, papers over the bug by allowing the linker to resolve the
weak/tentative definition to glibc's "real" definition.
Note, the symbol itself (or rather its address), not the value of the
symbol, is set to 0/NULL for unresolved weak symbol references, as the
symbol doesn't exist and thus can't have a value. Check for a NULL rseq
size pointer to handle the scenario where the test is statically linked
against a libc that doesn't support rseq in any capacity.
Fixes: 3bcbc20942 ("selftests/rseq: Play nice with binaries statically linked against glibc 2.35+")
Reported-by: Thomas Gleixner <tglx@linutronix.de>
Suggested-by: Florian Weimer <fweimer@redhat.com>
Signed-off-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: stable@vger.kernel.org
Closes: https://lore.kernel.org/all/87frdoybk4.ffs@tglx
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit a9e6aa9949 upstream.
devm_kcalloc() may fail. ndtest_probe() allocates three DMA address
arrays (dcr_dma, label_dma, dimm_dma) and later unconditionally uses
them in ndtest_nvdimm_init(), which can lead to a NULL pointer
dereference under low-memory conditions.
Check all three allocations and return -ENOMEM if any allocation fails,
jumping to the common error path. Do not emit an extra error message
since the allocator already warns on allocation failure.
Fixes: 9399ab61ad ("ndtest: Add dimms to the two buses")
Cc: stable@vger.kernel.org
Signed-off-by: Guangshuo Li <lgs201920130244@gmail.com>
Reviewed-by: Alison Schofield <alison.schofield@intel.com>
Reviewed-by: Ira Weiny <ira.weiny@intel.com>
Reviewed-by: Dave Jiang <dave.jiang@intel.com>
Signed-off-by: Ira Weiny <ira.weiny@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit e8cfc524ea ]
Check if watchdog device supports WDIOF_KEEPALIVEPING option before
entering keep_alive() ping test loop. Fix watchdog-test silently looping
if ioctl based ping is not supported by the device. Exit from test in
such case instead of getting stuck in loop executing failing keep_alive()
watchdog_info:
identity: m41t93 rtc Watchdog
firmware_version: 0
Support/Status: Set timeout (in seconds)
Support/Status: Watchdog triggers a management or other external alarm not a reboot
Watchdog card disabled.
Watchdog timeout set to 5 seconds.
Watchdog ping rate set to 2 seconds.
Watchdog card enabled.
WDIOC_KEEPALIVE not supported by this device
without this change
Watchdog card disabled.
Watchdog timeout set to 5 seconds.
Watchdog ping rate set to 2 seconds.
Watchdog card enabled.
Watchdog Ticking Away!
(Where test stuck here forver silently)
Updated change log at commit time:
Shuah Khan <skhan@linuxfoundation.org>
Link: https://lore.kernel.org/r/20250914152840.GA3047348@bhairav-test.ee.iitb.ac.in
Fixes: d89d08ffd2 ("selftests: watchdog: Fix ioctl SET* error paths to take oneshot exit path")
Signed-off-by: Akhilesh Patil <akhilesh@ee.iitb.ac.in>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit a679e5683d ]
Fix -Wunused-result warning generated when compiled with gcc 13.3.0,
by checking fread's return value and handling errors, preventing
potential failures when reading from stdin.
Fixes compiler warning:
warning: ignoring return value of 'fread' declared with attribute
'warn_unused_result' [-Wunused-result]
Fixes: 806a15b254 ("kselftests/arm64: add PAuth test for whether exec() changes keys")
Signed-off-by: Bala-Vignesh-Reddy <reddybalavignesh9979@gmail.com>
Reviewed-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Will Deacon <will@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit c29913109c ]
The test creates non-FDB nexthops without a nexthop device which leads
to the expected failure, but for the wrong reason:
# ./fib_nexthops.sh -t "ipv6_fdb_grp_fcnal ipv4_fdb_grp_fcnal" -v
IPv6 fdb groups functional
--------------------------
[...]
COMMAND: ip -netns me-nRsN3E nexthop add id 63 via 2001:db8:91::4
Error: Device attribute required for non-blackhole and non-fdb nexthops.
COMMAND: ip -netns me-nRsN3E nexthop add id 64 via 2001:db8:91::5
Error: Device attribute required for non-blackhole and non-fdb nexthops.
COMMAND: ip -netns me-nRsN3E nexthop add id 103 group 63/64 fdb
Error: Invalid nexthop id.
TEST: Fdb Nexthop group with non-fdb nexthops [ OK ]
[...]
IPv4 fdb groups functional
--------------------------
[...]
COMMAND: ip -netns me-nRsN3E nexthop add id 14 via 172.16.1.2
Error: Device attribute required for non-blackhole and non-fdb nexthops.
COMMAND: ip -netns me-nRsN3E nexthop add id 15 via 172.16.1.3
Error: Device attribute required for non-blackhole and non-fdb nexthops.
COMMAND: ip -netns me-nRsN3E nexthop add id 103 group 14/15 fdb
Error: Invalid nexthop id.
TEST: Fdb Nexthop group with non-fdb nexthops [ OK ]
COMMAND: ip -netns me-nRsN3E nexthop add id 16 via 172.16.1.2 fdb
COMMAND: ip -netns me-nRsN3E nexthop add id 17 via 172.16.1.3 fdb
COMMAND: ip -netns me-nRsN3E nexthop add id 104 group 14/15
Error: Invalid nexthop id.
TEST: Non-Fdb Nexthop group with fdb nexthops [ OK ]
[...]
COMMAND: ip -netns me-0dlhyd ro add 172.16.0.0/22 nhid 15
Error: Nexthop id does not exist.
TEST: Route add with fdb nexthop [ OK ]
In addition, as can be seen in the above output, a couple of IPv4 test
cases used the non-FDB nexthops (14 and 15) when they intended to use
the FDB nexthops (16 and 17). These test cases only passed because
failure was expected, but they failed for the wrong reason.
Fix the test to create the non-FDB nexthops with a nexthop device and
adjust the IPv4 test cases to use the FDB nexthops instead of the
non-FDB nexthops.
Output after the fix:
# ./fib_nexthops.sh -t "ipv6_fdb_grp_fcnal ipv4_fdb_grp_fcnal" -v
IPv6 fdb groups functional
--------------------------
[...]
COMMAND: ip -netns me-lNzfHP nexthop add id 63 via 2001:db8:91::4 dev veth1
COMMAND: ip -netns me-lNzfHP nexthop add id 64 via 2001:db8:91::5 dev veth1
COMMAND: ip -netns me-lNzfHP nexthop add id 103 group 63/64 fdb
Error: FDB nexthop group can only have fdb nexthops.
TEST: Fdb Nexthop group with non-fdb nexthops [ OK ]
[...]
IPv4 fdb groups functional
--------------------------
[...]
COMMAND: ip -netns me-lNzfHP nexthop add id 14 via 172.16.1.2 dev veth1
COMMAND: ip -netns me-lNzfHP nexthop add id 15 via 172.16.1.3 dev veth1
COMMAND: ip -netns me-lNzfHP nexthop add id 103 group 14/15 fdb
Error: FDB nexthop group can only have fdb nexthops.
TEST: Fdb Nexthop group with non-fdb nexthops [ OK ]
COMMAND: ip -netns me-lNzfHP nexthop add id 16 via 172.16.1.2 fdb
COMMAND: ip -netns me-lNzfHP nexthop add id 17 via 172.16.1.3 fdb
COMMAND: ip -netns me-lNzfHP nexthop add id 104 group 16/17
Error: Non FDB nexthop group cannot have fdb nexthops.
TEST: Non-Fdb Nexthop group with fdb nexthops [ OK ]
[...]
COMMAND: ip -netns me-lNzfHP ro add 172.16.0.0/22 nhid 16
Error: Route cannot point to a fdb nexthop.
TEST: Route add with fdb nexthop [ OK ]
[...]
Tests passed: 30
Tests failed: 0
Tests skipped: 0
Fixes: 0534c5489c ("selftests: net: add fdb nexthop tests")
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Link: https://patch.msgid.link/20250921150824.149157-3-idosch@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
commit 452690be7d upstream.
This modification is linked to the parent commit where the received
ADD_ADDR limit was accidentally reset when the endpoints were flushed.
To validate that, the test is now flushing endpoints after having set
new limits, and before checking them.
The 'Fixes' tag here below is the same as the one from the previous
commit: this patch here is not fixing anything wrong in the selftests,
but it validates the previous fix for an issue introduced by this commit
ID.
Fixes: 01cacb00b3 ("mptcp: add netlink-based PM")
Cc: stable@vger.kernel.org
Reviewed-by: Mat Martineau <martineau@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://patch.msgid.link/20250815-net-mptcp-misc-fixes-6-17-rc2-v1-3-521fe9957892@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
[ Conflicts in pm_netlink.sh, because some refactoring have been done
later on: commit 3188309c8c ("selftests: mptcp: netlink:
add 'limits' helpers") and commit c99d57d000 ("selftests: mptcp: use
pm_nl endpoint ops") are not in this version. The same operation can
still be done at the same place, without using the new helper. ]
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit fd37c2ecb2 upstream.
In a few MPTCP selftest tools, gcc 12 complains that the 'sock' variable
might be used uninitialized. This is a false positive because the only
code path that could lead to uninitialized access is where getaddrinfo()
fails, but the local xgetaddrinfo() wrapper exits if such a failure
occurs.
Initialize the 'sock' variable anyway to allow the tools to build with
gcc 12.
Fixes: 048d19d444 ("mptcp: add basic kselftest for mptcp")
Acked-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
[ mptcp_inq.c and mptcp_sockopt.c are not in this version. The fix can
still be applied in mptcp_connect.c without conflicts. ]
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 857898eb4b upstream.
This function also writes the name of the test with its ID, making clear
a new test has been executed.
Without that, the ADD_ADDR results from this test was appended at the
end of the previous test causing confusions. Especially when the second
test was failing, we had:
17 signal invalid addresses syn[ ok ] - synack[ ok ] - ack[ ok ]
add[ ok ] - echo [ ok ]
add[fail] got 2 ADD_ADDR[s] expected 3
In fact, this 17th test was OK but not the 18th one.
Now we have:
17 signal invalid addresses syn[ ok ] - synack[ ok ] - ack[ ok ]
add[ ok ] - echo [ ok ]
18 signal addresses race test syn[fail] got 2 JOIN[s] syn expected 3
- synack[fail] got 2 JOIN[s] synack expected
- ack[fail] got 2 JOIN[s] ack expected 3
add[fail] got 2 ADD_ADDR[s] expected 3
Fixes: 33c563ad28 ("selftests: mptcp: add_addr and echo race test")
Reported-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
[ Conflict in mptcp_join.sh, because commit 86e39e0448 ("mptcp: keep
track of local endpoint still available for each msk") is not in this
version and changed the context. The same line can still be applied at
the same place. ]
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit fdf0f60a2b upstream.
The checksum mode has been added a while ago, but it is only validated
when manually launching mptcp_connect.sh with "-C".
The different CIs were then not validating these MPTCP Connect tests
with checksum enabled. To make sure they do, add a new test program
executing mptcp_connect.sh with the checksum mode.
Fixes: 94d66ba1d8 ("selftests: mptcp: enable checksum in mptcp_connect.sh")
Cc: stable@vger.kernel.org
Reviewed-by: Geliang Tang <geliang@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://patch.msgid.link/20250715-net-mptcp-sft-connect-alt-v2-2-8230ddd82454@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
[ Conflict in Makefile, in the context, because userspace_pm.sh test
has been introduced later, in commit 3ddabc4336 ("selftests: mptcp:
validate userspace PM tests by default"), which is not in this
version. ]
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 37848a456f ]
The "mmap" and "sendfile" alternate modes for mptcp_connect.sh/.c are
available from the beginning, but only tested when mptcp_connect.sh is
manually launched with "-m mmap" or "-m sendfile", not via the
kselftests helpers.
The MPTCP CI was manually running "mptcp_connect.sh -m mmap", but not
"-m sendfile". Plus other CIs, especially the ones validating the stable
releases, were not validating these alternate modes.
To make sure these modes are validated by these CIs, add two new test
programs executing mptcp_connect.sh with the alternate modes.
Fixes: 048d19d444 ("mptcp: add basic kselftest for mptcp")
Cc: stable@vger.kernel.org
Reviewed-by: Geliang Tang <geliang@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://patch.msgid.link/20250715-net-mptcp-sft-connect-alt-v2-1-8230ddd82454@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
[ Drop userspace_pm.sh from TEST_PROGS ]
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit df9e03aec3 upstream.
When the selftest got added, sendfile() on mptcp sockets returned
-EOPNOTSUPP, so running 'mptcp_connect.sh -m sendfile' failed
immediately.
This is no longer the case, but the script fails anyway due to timeout.
Let the receiver know once the sender has sent all data, just like
with '-m mmap' mode.
v2: need to respect cfg_wait too, as pm_userspace.sh relied
on -m sendfile to keep the connection open (Mat Martineau)
Fixes: 048d19d444 ("mptcp: add basic kselftest for mptcp")
Reported-by: Xiumei Mu <xmu@redhat.com>
Reviewed-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 61f7e318e9 ]
If a default variable contains itself, do not recurse on it.
For example:
ADD_CONFIG := ${CONFIG_DIR}/temp_config
DEFAULTS
ADD_CONFIG = ${CONFIG_DIR}/default_config ${ADD_CONFIG}
The above works because the temp variable ADD_CONFIG (is a temp because it
is created with ":=") is already defined, it will be substituted in the
variable option. But if it gets commented out:
# ADD_CONFIG := ${CONFIG_DIR}/temp_config
DEFAULTS
ADD_CONFIG = ${CONFIG_DIR}/default_config ${ADD_CONFIG}
Then the above will go into a recursive loop where ${ADD_CONFIG} will
get replaced with the current definition of ADD_CONFIG which contains the
${ADD_CONFIG} and that will also try to get converted. ktest.pl will error
after 100 attempts of recursion and fail.
When replacing a variable with the default variable, if the default
variable contains itself, do not replace it.
Cc: "John Warthog9 Hawley" <warthog9@kernel.org>
Cc: Dhaval Giani <dhaval.giani@gmail.com>
Cc: Greg KH <gregkh@linuxfoundation.org>
Link: https://lore.kernel.org/20250718202053.732189428@kernel.org
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
commit 084d2ac403 upstream.
Exercise various mmap(), munmap() and mremap() invocations, which might
cause a perf buffer mapping to be split or truncated.
To avoid hard coding the perf event and having dependencies on
architectures and configuration options, scan through event types in sysfs
and try to open them. On success, try to mmap() and if that succeeds try to
mmap() the AUX buffer.
In case that no AUX buffer supporting event is found, only test the base
buffer mapping. If no mappable event is found or permissions are not
sufficient, skip the tests.
Reserve a PROT_NONE region for both rb and aux tests to allow testing the
case where mremap unmaps beyond the end of a mapped VMA to prevent it from
unmapping unrelated mappings.
Signed-off-by: Lorenzo Stoakes <lorenzo.stoakes@oracle.com>
Co-developed-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Lorenzo Stoakes <lorenzo.stoakes@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 213879061a ]
The subsystem event test enables all "sched" events and makes sure there's
at least 3 different events in the output. It used to cat the entire trace
file to | wc -l, but on slow machines, that could last a very long time.
To solve that, it was changed to just read the first 100 lines of the
trace file. This can cause false failures as some events repeat so often,
that the 100 lines that are examined could possibly be of only one event.
Instead, create an awk script that looks for 3 different events and will
exit out after it finds them. This will find the 3 events the test looks
for (eventually if it works), and still exit out after the test is
satisfied and not cause slower machines to run forever.
Link: https://lore.kernel.org/r/20250721134212.53c3e140@batman.local.home
Reported-by: Tengda Wu <wutengda@huaweicloud.com>
Closes: https://lore.kernel.org/all/20250710130134.591066-1-wutengda@huaweicloud.com/
Fixes: 1a4ea83a6e ("selftests/ftrace: Limit length in subsystem-enable tests")
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit b89732c8c8 ]
Successful syscalls don't change errno, so checking errno is wrong
to ensure that a syscall has failed. For example for the following
sequence:
prctl(PR_SET_SYSCALL_USER_DISPATCH, op, 0x0, 0xff, 0);
EXPECT_EQ(EINVAL, errno);
prctl(PR_SET_SYSCALL_USER_DISPATCH, op, 0x0, 0x0, &sel);
EXPECT_EQ(EINVAL, errno);
only the first syscall may fail and set errno, but the second may succeed
and keep errno intact, and the check will falsely pass.
Or if errno happened to be EINVAL before, even the first check may falsely
pass.
Also use EXPECT/ASSERT consistently. Currently there is an inconsistent mix
without obvious reasons for usage of one or another.
Fixes: 179ef03599 ("selftests: Add kselftest for syscall user dispatch")
Signed-off-by: Dmitry Vyukov <dvyukov@google.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/all/af6a04dbfef9af8570f5bab43e3ef1416b62699a.1747839857.git.dvyukov@google.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 7167395a4b ]
Currently, we only check the latest senders's exit code. If the receiver
report failed, it is not recoreded. Fix it by checking the exit code
of all the involved processes.
Before:
bad GRO lookup ok
multiple GRO socks ./udpgso_bench_rx: recv: bad packet len, got 1452, expected 14520
./udpgso_bench_rx: recv: bad packet len, got 1452, expected 14520
failed
$ echo $?
0
After:
bad GRO lookup ok
multiple GRO socks ./udpgso_bench_rx: recv: bad packet len, got 1452, expected 14520
./udpgso_bench_rx: recv: bad packet len, got 1452, expected 14520
failed
$ echo $?
1
Fixes: 3327a9c463 ("selftests: add functionals test for UDP GRO")
Suggested-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Hangbin Liu <liuhangbin@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Stable-dep-of: 0e9418961f ("selftests: net: increase inter-packet timeout in udpgro.sh")
Signed-off-by: Sasha Levin <sashal@kernel.org>
commit f287822688 upstream.
When FRED is enabled, if the Trap Flag (TF) is set without an external
debugger attached, it can lead to an infinite loop in the SIGTRAP
handler. To avoid this, the software event flag in the augmented SS
must be cleared, ensuring that no single-step trap remains pending when
ERETU completes.
This test checks for that specific scenario—verifying whether the kernel
correctly prevents an infinite SIGTRAP loop in this edge case when FRED
is enabled.
The test should _always_ pass with IDT event delivery, thus no need to
disable the test even when FRED is not enabled.
Signed-off-by: Xin Li (Intel) <xin@zytor.com>
Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com>
Tested-by: Sohil Mehta <sohil.mehta@intel.com>
Cc:stable@vger.kernel.org
Link: https://lore.kernel.org/all/20250609084054.2083189-3-xin%40zytor.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 797002deed ]
The inconsistencies in the systcall ABI between arm and arm-compat can
can cause a failure in the syscall_restart test due to the logic
attempting to work around the differences. The 'machine' field for an
ARM64 device running in compat mode can report 'armv8l' or 'armv8b'
which matches with the string 'arm' when only examining the first three
characters of the string.
This change adds additional validation to the workaround logic to make
sure we only take the arm path when running natively, not in arm-compat.
Fixes: 256d0afb11 ("selftests/seccomp: build and pass on arm64")
Signed-off-by: Neill Kapron <nkapron@google.com>
Link: https://lore.kernel.org/r/20250427094103.3488304-2-nkapron@google.com
Signed-off-by: Kees Cook <kees@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
commit ab00ddd802 upstream.
When running mm selftest to verify mm patches, 'compaction_test' case
failed on an x86 server with 1TB memory. And the root cause is that it
has too much free memory than what the test supports.
The test case tries to allocate 100000 huge pages, which is about 200 GB
for that x86 server, and when it succeeds, it expects it's large than 1/3
of 80% of the free memory in system. This logic only works for platform
with 750 GB ( 200 / (1/3) / 80% ) or less free memory, and may raise false
alarm for others.
Fix it by changing the fixed page number to self-adjustable number
according to the real number of free memory.
Link: https://lkml.kernel.org/r/20250423103645.2758-1-feng.tang@linux.alibaba.com
Fixes: bd67d5c15c ("Test compaction of mlocked memory")
Signed-off-by: Feng Tang <feng.tang@linux.alibaba.com>
Acked-by: Dev Jain <dev.jain@arm.com>
Reviewed-by: Baolin Wang <baolin.wang@linux.alibaba.com>
Tested-by: Baolin Wang <baolin.wang@inux.alibaba.com>
Cc: Shuah Khan <shuah@kernel.org>
Cc: Sri Jayaramappa <sjayaram@akamai.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 197c1eaa7b ]
When running the mincore_selftest on a system with an XFS file system, it
failed the "check_file_mmap" test case due to the read-ahead pages reaching
the end of the file. The failure log is as below:
RUN global.check_file_mmap ...
mincore_selftest.c:264:check_file_mmap:Expected i (1024) < vec_size (1024)
mincore_selftest.c:265:check_file_mmap:Read-ahead pages reached the end of the file
check_file_mmap: Test failed
FAIL global.check_file_mmap
This is because the read-ahead window size of the XFS file system on this
machine is 4 MB, which is larger than the size from the #PF address to the
end of the file. As a result, all the pages for this file are populated.
blockdev --getra /dev/nvme0n1p5
8192
blockdev --getbsz /dev/nvme0n1p5
512
This issue can be fixed by extending the current FILE_SIZE 4MB to a larger
number, but it will still fail if the read-ahead window size of the file
system is larger enough. Additionally, in the real world, read-ahead pages
reaching the end of the file can happen and is an expected behavior.
Therefore, allowing read-ahead pages to reach the end of the file is a
better choice for the "check_file_mmap" test case.
Link: https://lore.kernel.org/r/20250311080940.21413-1-qiuxu.zhuo@intel.com
Reported-by: Yi Lai <yi1.lai@intel.com>
Signed-off-by: Qiuxu Zhuo <qiuxu.zhuo@intel.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 9c02223e2d ]
Currently if the filesystem for the cgroups version it wants to use is not
mounted charge_reserved_hugetlb.sh and hugetlb_reparenting_test.sh tests
will attempt to mount it on the hard coded path /dev/cgroup/memory,
deleting that directory when the test finishes. This will fail if there
is not a preexisting directory at that path, and since the directory is
deleted subsequent runs of the test will fail. Instead of relying on this
hard coded directory name use mktemp to generate a temporary directory to
use as a mountpoint, fixing both the assumption and the disruption caused
by deleting a preexisting directory.
This means that if the relevant cgroup filesystem is not already mounted
then we rely on having coreutils (which provides mktemp) installed. I
suspect that many current users are relying on having things automounted
by default, and given that the script relies on bash it's probably not an
unreasonable requirement.
Link: https://lkml.kernel.org/r/20250404-kselftest-mm-cgroup2-detection-v1-1-3dba6d32ba8c@kernel.org
Fixes: 209376ed2a ("selftests/vm: make charge_reserved_hugetlb.sh work with existing cgroup setting")
Signed-off-by: Mark Brown <broonie@kernel.org>
Cc: Aishwarya TCV <aishwarya.tcv@arm.com>
Cc: Mark Brown <broonie@kernel.org>
Cc: Mina Almasry <almasrymina@google.com>
Cc: Shuah Khan <shuah@kernel.org>
Cc: Waiman Long <longman@redhat.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
commit 15383a0d63 upstream.
Some fixes may require user space to check if they are applied on the
running kernel before using a specific feature. For instance, this
applies when a restriction was previously too restrictive and is now
getting relaxed (e.g. for compatibility reasons). However, non-visible
changes for legitimate use (e.g. security fixes) do not require an
erratum.
Because fixes are backported down to a specific Landlock ABI, we need a
way to avoid cherry-pick conflicts. The solution is to only update a
file related to the lower ABI impacted by this issue. All the ABI files
are then used to create a bitmask of fixes.
The new errata interface is similar to the one used to get the supported
Landlock ABI version, but it returns a bitmask instead because the order
of fixes may not match the order of versions, and not all fixes may
apply to all versions.
The actual errata will come with dedicated commits. The description is
not actually used in the code but serves as documentation.
Create the landlock_abi_version symbol and use its value to check errata
consistency.
Update test_base's create_ruleset_checks_ordering tests and add errata
tests.
This commit is backportable down to the first version of Landlock.
Fixes: 3532b0b435 ("landlock: Enable user space to infer supported features")
Cc: Günther Noack <gnoack@google.com>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20250318161443.279194-3-mic@digikod.net
Signed-off-by: Mickaël Salaün <mic@digikod.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 7d3f3b4367 ]
Check number of paths by fib_info_num_path(),
and update_or_create_fnhe() for every path.
Problem is that pmtu is cached only for the oif
that has received icmp message "need to frag",
other oifs will still try to use "default" iface mtu.
An example topology showing the problem:
| host1
+---------+
| dummy0 | 10.179.20.18/32 mtu9000
+---------+
+-----------+----------------+
+---------+ +---------+
| ens17f0 | 10.179.2.141/31 | ens17f1 | 10.179.2.13/31
+---------+ +---------+
| (all here have mtu 9000) |
+------+ +------+
| ro1 | 10.179.2.140/31 | ro2 | 10.179.2.12/31
+------+ +------+
| |
---------+------------+-------------------+------
|
+-----+
| ro3 | 10.10.10.10 mtu1500
+-----+
|
========================================
some networks
========================================
|
+-----+
| eth0| 10.10.30.30 mtu9000
+-----+
| host2
host1 have enabled multipath and
sysctl net.ipv4.fib_multipath_hash_policy = 1:
default proto static src 10.179.20.18
nexthop via 10.179.2.12 dev ens17f1 weight 1
nexthop via 10.179.2.140 dev ens17f0 weight 1
When host1 tries to do pmtud from 10.179.20.18/32 to host2,
host1 receives at ens17f1 iface an icmp packet from ro3 that ro3 mtu=1500.
And host1 caches it in nexthop exceptions cache.
Problem is that it is cached only for the iface that has received icmp,
and there is no way that ro3 will send icmp msg to host1 via another path.
Host1 now have this routes to host2:
ip r g 10.10.30.30 sport 30000 dport 443
10.10.30.30 via 10.179.2.12 dev ens17f1 src 10.179.20.18 uid 0
cache expires 521sec mtu 1500
ip r g 10.10.30.30 sport 30033 dport 443
10.10.30.30 via 10.179.2.140 dev ens17f0 src 10.179.20.18 uid 0
cache
So when host1 tries again to reach host2 with mtu>1500,
if packet flow is lucky enough to be hashed with oif=ens17f1 its ok,
if oif=ens17f0 it blackholes and still gets icmp msgs from ro3 to ens17f1,
until lucky day when ro3 will send it through another flow to ens17f0.
Signed-off-by: Vladimir Vdovin <deliran@verdict.gg>
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Link: https://patch.msgid.link/20241108093427.317942-1-deliran@verdict.gg
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Stable-dep-of: 139512191b ("ipv4: use RCU protection in __ip_rt_update_pmtu()")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit ec730c3e1f ]
Add two tests to pmtu.sh, for verifying that PMTU exceptions get
properly created for routes that don't belong to the main table.
A fib-rule based on the packet's DSCP field is used to jump to the
correct table. ECN shouldn't interfere with this process, so each test
has two components: one that only sets DSCP and one that sets both DSCP
and ECN.
One of the test triggers PMTU exceptions using ICMP Echo Requests, the
other using UDP packets (to test different handlers in the kernel).
A few adjustments are necessary in the rest of the script to allow
policy routing scenarios:
* Add global variable rt_table that allows setup_routing_*() to
add routes to a specific routing table. By default rt_table is set
to "main", so existing tests don't need to be modified.
* Another global variable, policy_mark, is used to define which
dsfield value is used for policy routing. This variable has no
effect on tests that don't use policy routing.
* The UDP version of the test uses socat. So cleanup() now also need
to kill socat PIDs.
* route_get_dst_pmtu_from_exception() and route_get_dst_exception()
now take an optional third argument specifying the dsfield. If
not specified, 0 is used, so existing users don't need to be
modified.
Signed-off-by: Guillaume Nault <gnault@redhat.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Stable-dep-of: 139512191b ("ipv4: use RCU protection in __ip_rt_update_pmtu()")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 235174b2be ]
Commit 4094871db1 ("udp: only do GSO if # of segs > 1") avoided GSO
for small packets. But the kernel currently dismisses GSO requests only
after checking MTU/PMTU on gso_size. This means any packets, regardless
of their payload sizes, could be dropped when PMTU becomes smaller than
requested gso_size. We encountered this issue in production and it
caused a reliability problem that new QUIC connection cannot be
established before PMTU cache expired, while non GSO sockets still
worked fine at the same time.
Ideally, do not check any GSO related constraints when payload size is
smaller than requested gso_size, and return EMSGSIZE instead of EINVAL
on MTU/PMTU check failure to be more specific on the error cause.
Fixes: 4094871db1 ("udp: only do GSO if # of segs > 1")
Signed-off-by: Yan Zhai <yan@cloudflare.com>
Suggested-by: Willem de Bruijn <willemdebruijn.kernel@gmail.com>
Reviewed-by: Willem de Bruijn <willemb@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Jakub Kicinski
Wang Liang
David Wei
Anubhav Singh
Richard Gobert
Nai-Chen Cheng
David Ahern
Ido Schimmel
Wake Liu
Ricardo B. Marlière
Matthieu Baerts (NGI0)
Linus Torvalds
Sean Christopherson
Guangshuo Li
Akhilesh Patil
Bala-Vignesh-Reddy
Mat Martineau
Matthieu Baerts
Florian Westphal
Lorenzo Stoakes
Steven Rostedt
Masami Hiramatsu (Google)
Cynthia Huang
Xiumei Mu
Dmitry Vyukov
Paolo Abeni
Hangbin Liu
Xin Li (Intel)
Neill Kapron
Kevin Krakauer
Feng Tang
Qiuxu Zhuo
Ming Lei
Mark Brown
Mickaël Salaün
Ayush Jain
Vladimir Vdovin
Guillaume Nault
Yan Zhai
Liu Ye