Pull nfsd fixes from Chuck Lever:
"Address recently reported issues or issues found at the recent NFS
bake-a-thon held in Raleigh, NC.
Issues reported with v6.18-rc:
- Address a kernel build issue
- Reorder SEQUENCE processing to avoid spurious NFS4ERR_SEQ_MISORDERED
Issues that need expedient stable backports:
- Close a refcount leak exposure
- Report support for NFSv4.2 CLONE correctly
- Fix oops during COPY_NOTIFY processing
- Prevent rare crash after XDR encoding failure
- Prevent crash due to confused or malicious NFSv4.1 client"
* tag 'nfsd-6.18-3' of git://git.kernel.org/pub/scm/linux/kernel/git/cel/linux:
Revert "SUNRPC: Make RPCSEC_GSS_KRB5 select CRYPTO instead of depending on it"
nfsd: ensure SEQUENCE replay sends a valid reply.
NFSD: Never cache a COMPOUND when the SEQUENCE operation fails
NFSD: Skip close replay processing if XDR encoding fails
NFSD: free copynotify stateid in nfs4_free_ol_stateid()
nfsd: add missing FATTR4_WORD2_CLONE_BLKSIZE from supported attributes
nfsd: fix refcount leak in nfsd_set_fh_dentry()
Pull dma-mapping fixes from Marek Szyprowski:
- two minor fixes for DMA API infrastructure: restoring proper
structure padding used in benchmark tests (Qinxin Xia) and global
DMA_BIT_MASK macro rework to make it a bit more clang friendly (James
Clark)
* tag 'dma-mapping-6.18-2025-11-12' of git://git.kernel.org/pub/scm/linux/kernel/git/mszyprowski/linux:
dma-mapping: Allow use of DMA_BIT_MASK(64) in global scope
dma-mapping: benchmark: Restore padding to ensure uABI remained consistent
Pull LoongArch fixes from Huacai Chen:
- Fix a Rust build error
- Fix exception/interrupt, memory management, perf event, hardware
breakpoint, kexec and KVM bugs
* tag 'loongarch-fixes-6.18-1' of git://git.kernel.org/pub/scm/linux/kernel/git/chenhuacai/linux-loongson:
LoongArch: KVM: Fix max supported vCPUs set with EIOINTC
LoongArch: KVM: Skip PMU checking on vCPU context switch
LoongArch: KVM: Restore guest PMU if it is enabled
LoongArch: KVM: Add delay until timer interrupt injected
LoongArch: KVM: Set page with write attribute if dirty track disabled
LoongArch: kexec: Print out debugging message if required
LoongArch: kexec: Initialize the kexec_buf structure
LoongArch: Use correct accessor to read FWPC/MWPC
LoongArch: Refine the init_hw_perf_events() function
LoongArch: Remove __GFP_HIGHMEM masking in pud_alloc_one()
LoongArch: Let {pte,pmd}_modify() record the status of _PAGE_DIRTY
LoongArch: Consolidate max_pfn & max_low_pfn calculation
LoongArch: Consolidate early_ioremap()/ioremap_prot()
LoongArch: Use physical addresses for CSR_MERRENTRY/CSR_TLBRENTRY
LoongArch: Clarify 3 MSG interrupt features
rust: Add -fno-isolate-erroneous-paths-dereference to bindgen_skip_c_flags
Pull alpha fix from Matt Turner:
"Add Magnus as a maintainer of the alpha port"
* tag 'alpha-fixes-v6.18-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/mattst88/alpha:
MAINTAINERS: Add Magnus Lindholm as maintainer for alpha port
Russell King says:
====================
net: stmmac: convert glue drivers to use stmmac_get_phy_intf_sel()
This series converts the remaining glue drivers that support
multi-interface to use stmmac_get_phy_intf_sel(). The reason these
drivers are not converted to the set_phy_intf_sel() method is
because it is unclear whether there are ordering dependencies that
would prevent it.
For example, reading the stm32mp2 documentation, it is required to
set the ETH1_SEL field while the dwmac core is in reset and before
clocks are enabled. This requirement can not be satsified at the
moment (but could with further changes.)
====================
Link: https://patch.msgid.link/aRLvrfx6tOa-RhrY@shell.armlinux.org.uk
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Use stmmac_get_phy_intf_sel() to decode the PHY interface mode to the
phy_intf_sel value, validate the result and use that to set the
control register to select the operating mode for the DWMAC core.
Note that this will allow GMII as well as MII as the phy_intf_sel
value is the same for both.
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Link: https://patch.msgid.link/E1vIjUe-0000000DquB-3JDY@rmk-PC.armlinux.org.uk
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Convert dwmac-visconti to use the PHY_INTF_SEL_x definitions. The
original definitions used constant 0, BIT(0) (==1) and BIT(2) (==4)
to define these, but the values of the bits corresponds with the
PHY_INTF_SEL_x values, so it is highly likely that these are not
individual bits, but the PHY_INTF_SEL_x bitfield.
This removes this incorrect use of BIT().
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Link: https://patch.msgid.link/E1vIjUZ-0000000Dqu5-2sDI@rmk-PC.armlinux.org.uk
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Use stmmac_get_phy_intf_sel() to decode the PHY interface mode to the
phy_intf_sel value. As both configure functions would end up with the
same code, call this from stm32mp1_set_mode(), validate the result and
pass the resulting value into the stm32 configure function. Use this
value to set the operating mode for the DWMAC core.
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Link: https://patch.msgid.link/E1vIjUU-0000000Dqtz-2PwT@rmk-PC.armlinux.org.uk
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Convert dwmac-stm32 to use the PHY_INTF_SEL_x definitions.
For stm32mp1, the original definitions used constant 0 (GMII, 0 << 21),
BIT(21) (RGMII, 1 << 21) and BIT(23) (RMII, 4 << 21) to define these,
but from the values it can be clearly seen that these are the
PHY_INTF_SEL_x inputs to the dwmac.
For stm32mp2, the original definitions cover a bitfield 6:4 in the
SYSCFG Ethernet1 control register (according to documentation) and use
the PHY_INTF_SEL_x values.
Use the common dwmac definitions for the PHY interface selection field
by adding the bitfield mask, and using FIELD_PREP() for the bitfield
values.
This removes this incorrect use of BIT().
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Link: https://patch.msgid.link/E1vIjUK-0000000Dqtn-1AyK@rmk-PC.armlinux.org.uk
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
For NICs with a large (1024+) number of queues, this test can cause
excessive memory fragmentation. This results in OOM errors, and in the
worst case driver/kernel crashes. We don't need to test with the max number
of queues, just enough to create a high likelihood of races between
reconfiguration and stats getting read.
Signed-off-by: Dimitri Daskalakis <dimitri.daskalakis1@gmail.com>
Link: https://patch.msgid.link/20251111225319.3019542-1-dimitri.daskalakis1@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Christian reported that f3ac2ff148 ("PCI/ASPM: Enable all ClockPM and
ASPM states for devicetree platforms") broke booting on the A-EON AmigaOne
X1000.
Override the L0s and L1 Support advertised in Link Capabilities by the
X1000 Root Ports ([1959:a002]) so we don't try to enable those states.
Fixes: f3ac2ff148 ("PCI/ASPM: Enable all ClockPM and ASPM states for devicetree platforms")
Fixes: df5192d9bb ("PCI/ASPM: Enable only L0s and L1 for devicetree platforms")
Reported-by: Christian Zigotzky <chzigotzky@xenosoft.de>
Link: https://lore.kernel.org/r/a41d2ca1-fcd9-c416-b111-a958e92e94bf@xenosoft.de
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Existing quirks to disable ASPM L0s and L1 use pci_disable_link_state(),
which disables ASPM states and prevents their use in the future. But since
they are FINAL quirks, they happen after ASPM has already been enabled.
Here's a typical call path:
pci_host_probe
pci_scan_root_bus_bridge
pci_scan_child_bus
pci_scan_slot
pci_scan_single_device
pci_device_add
pci_fixup_device(pci_fixup_header) # HEADER quirks
pcie_aspm_init_link_state
pcie_config_aspm_path
pcie_config_aspm_link
pcie_config_aspm_dev # ASPM may be enabled
pci_bus_add_devices
pci_bus_add_devices
pci_fixup_device(pci_fixup_final) # FINAL quirks
quirk_disable_aspm_l0s
pci_disable_link_state(dev, PCIE_LINK_STATE_L0S)
Sometimes enabling ASPM can make the link non-functional, so if we know
ASPM is broken on a device, we shouldn't enable it at all, even
temporarily.
Convert the existing quirks to use pcie_aspm_remove_cap() instead, which
overrides the ASPM Support advertised in PCIe Link Capabilities, and make
them HEADER quirks so they run before pcie_aspm_init_link_state() has a
chance to enable ASPM.
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Tested-by: Shawn Lin <shawn.lin@rock-chips.com>
Reviewed-by: Lukas Wunner <lukas@wunner.de>
Link: https://patch.msgid.link/20251110222929.2140564-4-helgaas@kernel.org
Defective devices sometimes advertise support for ASPM L0s or L1 states
even if they don't work correctly.
Cache the L0s Supported and L1 Supported bits early in enumeration so
HEADER quirks can override the ASPM states advertised in Link Capabilities
before pcie_aspm_cap_init() enables ASPM.
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Tested-by: Shawn Lin <shawn.lin@rock-chips.com>
Reviewed-by: Lukas Wunner <lukas@wunner.de>
Link: https://patch.msgid.link/20251110222929.2140564-2-helgaas@kernel.org
rsnd_ssiu_probe() leaks an OF node reference obtained by
rsnd_ssiu_of_node(). The node reference is acquired but
never released across all return paths.
Fix it by declaring the device node with the __free(device_node)
cleanup construct to ensure automatic release when the variable goes
out of scope.
Fixes: 4e7788fb80 ("ASoC: rsnd: add SSIU BUSIF support")
Signed-off-by: Haotian Zhang <vulab@iscas.ac.cn>
Acked-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://patch.msgid.link/20251112065709.1522-1-vulab@iscas.ac.cn
Signed-off-by: Mark Brown <broonie@kernel.org>
The following lockdep splat was observed while kernel auto-online a CXL
memory region:
======================================================
WARNING: possible circular locking dependency detected
6.17.0djtest+ #53 Tainted: G W
------------------------------------------------------
systemd-udevd/3334 is trying to acquire lock:
ffffffff90346188 (hmem_resource_lock){+.+.}-{4:4}, at: hmem_register_resource+0x31/0x50
but task is already holding lock:
ffffffff90338890 ((node_chain).rwsem){++++}-{4:4}, at: blocking_notifier_call_chain+0x2e/0x70
which lock already depends on the new lock.
[..]
Chain exists of:
hmem_resource_lock --> mem_hotplug_lock --> (node_chain).rwsem
Possible unsafe locking scenario:
CPU0 CPU1
---- ----
rlock((node_chain).rwsem);
lock(mem_hotplug_lock);
lock((node_chain).rwsem);
lock(hmem_resource_lock);
The lock ordering can cause potential deadlock. There are instances
where hmem_resource_lock is taken after (node_chain).rwsem, and vice
versa.
Split out the target update section of hmat_register_target() so that
hmat_callback() only envokes that section instead of attempt to register
hmem devices that it does not need to.
[ dj: Fix up comment to be closer to 80cols. (Jonathan) ]
Fixes: cf8741ac57 ("ACPI: NUMA: HMAT: Register "soft reserved" memory as an "hmem" device")
Reviewed-by: Jonathan Cameron <jonathan.cameron@huawei.com>
Tested-by: Smita Koralahalli <Smita.KoralahalliChannabasappa@amd.com>
Reviewed-by: Smita Koralahalli <Smita.KoralahalliChannabasappa@amd.com>
Reviewed-by: Dan Williams <dan.j.williams@intel.com>
Link: https://patch.msgid.link/20251105235115.85062-3-dave.jiang@intel.com
Signed-off-by: Dave Jiang <dave.jiang@intel.com>
Building gpd-fan driver without CONFIG_ACPI results in the following
build errors:
drivers/hwmon/gpd-fan.c: In function ‘gpd_ecram_read’:
drivers/hwmon/gpd-fan.c:228:9: error: implicit declaration of function ‘outb’ [-Werror=implicit-function-declaration]
228 | outb(0x2E, addr_port);
| ^~~~
drivers/hwmon/gpd-fan.c:241:16: error: implicit declaration of function ‘inb’ [-Werror=implicit-function-declaration]
241 | *val = inb(data_port);
The definitions for inb() and outb() come from <linux/io.h>
(specifically through <asm/io.h>), which is implicitly included via
<acpi_io.h>. When CONFIG_ACPI is not set, <acpi_io.h> is not included
resulting in <linux/io.h> to be omitted as well.
Since the driver does not depend on ACPI, remove <linux/acpi.h> and add
<linux/io.h> directly to fix the compilation errors.
Signed-off-by: Gopi Krishna Menon <krishnagopi487@gmail.com>
Link: https://lore.kernel.org/r/20251024202042.752160-1-krishnagopi487@gmail.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Update scx_task_locks so that it's safe to lock/unlock in a
non-sleepable context in PREEMPT_RT kernels. scx_task_locks is
(non-raw) spinlock used to protect the list of tasks under SCX.
This list is updated during from finish_task_switch(), which
cannot sleep. Regular spinlocks can be locked in such a context
in non-RT kernels, but are sleepable under when CONFIG_PREEMPT_RT=y.
Convert scx_task_locks into a raw spinlock, which is not sleepable
even on RT kernels.
Sample backtrace:
<TASK>
dump_stack_lvl+0x83/0xa0
__might_resched+0x14a/0x200
rt_spin_lock+0x61/0x1c0
? sched_ext_dead+0x2d/0xf0
? lock_release+0xc6/0x280
sched_ext_dead+0x2d/0xf0
? srso_alias_return_thunk+0x5/0xfbef5
finish_task_switch.isra.0+0x254/0x360
__schedule+0x584/0x11d0
? srso_alias_return_thunk+0x5/0xfbef5
? srso_alias_return_thunk+0x5/0xfbef5
? tick_nohz_idle_exit+0x7e/0x120
schedule_idle+0x23/0x40
cpu_startup_entry+0x29/0x30
start_secondary+0xf8/0x100
common_startup_64+0x13e/0x148
</TASK>
Signed-off-by: Emil Tsalapatis <emil@etsalapatis.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
Johannes Berg says:
====================
More -next material, notably:
- split ieee80211.h file, it's way too big
- mac80211: initial chanctx work towards NAN
- mac80211: MU-MIMO sniffer improvements
- ath12k: statistics improvements
* tag 'wireless-next-2025-11-12' of https://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless-next: (26 commits)
wifi: cw1200: Fix potential memory leak in cw1200_bh_rx_helper()
wifi: mac80211: make monitor link info check more specific
wifi: mac80211: track MU-MIMO configuration on disabled interfaces
wifi: cfg80211/mac80211: Add fallback mechanism for INDOOR_SP connection
wifi: cfg80211/mac80211: clean up duplicate ap_power handling
wifi: cfg80211: use a C99 initializer in wiphy_register
wifi: cfg80211: fix doc of struct key_params
wifi: mac80211: remove unnecessary vlan NULL check
wifi: mac80211: pass frame type to element parsing
wifi: mac80211: remove "disabling VHT" message
wifi: mac80211: add and use chanctx usage iteration
wifi: mac80211: simplify ieee80211_recalc_chanctx_min_def() API
wifi: mac80211: remove chanctx to link back-references
wifi: mac80211: make link iteration safe for 'break'
wifi: mac80211: fix EHT typo
wifi: cfg80211: fix EHT typo
wifi: ieee80211: split NAN definitions out
wifi: ieee80211: split P2P definitions out
wifi: ieee80211: split S1G definitions out
wifi: ieee80211: split EHT definitions out
...
====================
Link: https://patch.msgid.link/20251112115126.16223-4-johannes@sipsolutions.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Johannes Berg says:
====================
Couple more fixes:
- mwl8k: work around FW expecting a DSSS element in beacons
- ath11k: report correct TX status
- iwlwifi: avoid toggling links due to wrong element use
- iwlwifi: fix beacon template rate on older devices
- iwlwifi: fix loop iterator being used after loop
- mac80211: disallow address changes while using the address
- mac80211: avoid bad rate warning in monitor/sniffer mode
- hwsim: fix potential NULL deref (on monitor injection)
* tag 'wireless-2025-11-12' of https://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless:
wifi: iwlwifi: mld: always take beacon ies in link grading
wifi: iwlwifi: mvm: fix beacon template/fixed rate
wifi: iwlwifi: fix aux ROC time event iterator usage
wifi: mwl8k: inject DSSS Parameter Set element into beacons if missing
wifi: mac80211_hwsim: Fix possible NULL dereference
wifi: mac80211: skip rate verification for not captured PSDUs
wifi: mac80211: reject address change while connecting
wifi: ath11k: zero init info->status in wmi_process_mgmt_tx_comp()
====================
Link: https://patch.msgid.link/20251112114621.15716-5-johannes@sipsolutions.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Improve the readibility of the code setting ndev->max_mtu. This depends
on the hardware specific maximum defined by the MAC core, and also a
platform provided maximum.
The code was originally checking that the platform specific maximum was
between ndev->min_mtu..MAC core maximum before reducing ndev->max_mtu,
otherwise if the platform specific maximum was less than ndev->min_mtu,
issuing a warning.
Re-order the code to handle the case where the platform specific max is
below ndev->min_mtu, which then means that the subsequent test is
simply reducing ndev->max_mtu.
Update the comment, and add a few blank lines to separate the blocks of
code.
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Link: https://patch.msgid.link/E1vImWA-0000000DrIl-1HZY@rmk-PC.armlinux.org.uk
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Commit ac4e04d9e3 ("cpufreq: intel_pstate: Unchecked MSR aceess in
legacy mode") introduced a check for feature X86_FEATURE_IDA to verify
turbo mode support. Although this is the correct way to check for turbo
mode support, it causes issues on some platforms that disable turbo
during OS boot, but enable it later [1]. Before adding this feature
check, users were able to get turbo mode frequencies by writing 0 to
/sys/devices/system/cpu/intel_pstate/no_turbo post-boot.
To restore the old behavior on the affected systems while still
addressing the unchecked MSR issue on some Skylake-X systems, check
X86_FEATURE_IDA only immediately before updates of MSR_IA32_PERF_CTL
that may involve setting the Turbo Engage Bit (bit 32).
Fixes: ac4e04d9e3 ("cpufreq: intel_pstate: Unchecked MSR aceess in legacy mode")
Reported-by: Aaron Rainbolt <arainbolt@kfocus.org>
Closes: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/2122531 [1]
Tested-by: Aaron Rainbolt <arainbolt@kfocus.org>
Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
[ rjw: Subject adjustment, changelog edits ]
Link: https://patch.msgid.link/20251111010840.141490-1-srinivas.pandruvada@linux.intel.com
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
io_buffer_register_bvec() currently uses blk_rq_nr_phys_segments() as
the number of bvecs in the request. However, bvecs may be split into
multiple segments depending on the queue limits. Thus, the number of
segments may overestimate the number of bvecs. For ublk devices, the
only current users of io_buffer_register_bvec(), virt_boundary_mask,
seg_boundary_mask, max_segments, and max_segment_size can all be set
arbitrarily by the ublk server process.
Set imu->nr_bvecs based on the number of bvecs the rq_for_each_bvec()
loop actually yields. However, continue using blk_rq_nr_phys_segments()
as an upper bound on the number of bvecs when allocating imu to avoid
needing to iterate the bvecs a second time.
Link: https://lore.kernel.org/io-uring/20251111191530.1268875-1-csander@purestorage.com/
Signed-off-by: Caleb Sander Mateos <csander@purestorage.com>
Fixes: 27cb27b6d5 ("io_uring: add support for kernel registered bvecs")
Reviewed-by: Ming Lei <ming.lei@redhat.com>
Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
vfio_dma_mapping_test and vfio_pci_driver_test currently use iova=vaddr
as part of DMA mapping operations. However, not all IOMMUs support the
same virtual address width as the processor. For instance, older Intel
consumer platforms only support 39-bits of IOMMU address space. On such
platforms, using the virtual address as the IOVA fails.
Make the tests more robust by using iova_allocator to vend IOVAs, which
queries legally accessible IOVAs from the underlying IOMMUFD or VFIO
container.
Reviewed-by: David Matlack <dmatlack@google.com>
Tested-by: David Matlack <dmatlack@google.com>
Signed-off-by: Alex Mastro <amastro@fb.com>
Link: https://lore.kernel.org/r/20251111-iova-ranges-v3-4-7960244642c5@fb.com
Signed-off-by: Alex Williamson <alex@shazbot.org>
VFIO selftests need to map IOVAs from legally accessible ranges, which
could vary between hardware. Tests in vfio_dma_mapping_test.c are making
excessively strong assumptions about which IOVAs can be mapped.
Add vfio_iommu_iova_ranges(), which queries IOVA ranges from the
IOMMUFD or VFIO container associated with the device. The queried ranges
are normalized to IOMMUFD's iommu_iova_range representation so that
handling of IOVA ranges up the stack can be implementation-agnostic.
iommu_iova_range and vfio_iova_range are equivalent, so bias to using the
new interface's struct.
Query IOMMUFD's ranges with IOMMU_IOAS_IOVA_RANGES.
Query VFIO container's ranges with VFIO_IOMMU_GET_INFO and
VFIO_IOMMU_TYPE1_INFO_CAP_IOVA_RANGE.
The underlying vfio_iommu_type1_info buffer-related functionality has
been kept generic so the same helpers can be used to query other
capability chain information, if needed.
Reviewed-by: David Matlack <dmatlack@google.com>
Tested-by: David Matlack <dmatlack@google.com>
Signed-off-by: Alex Mastro <amastro@fb.com>
Link: https://lore.kernel.org/r/20251111-iova-ranges-v3-1-7960244642c5@fb.com
Signed-off-by: Alex Williamson <alex@shazbot.org>
The sit driver's packet transmission path calls: sit_tunnel_xmit() ->
update_or_create_fnhe(), which lead to fnhe_remove_oldest() being called
to delete entries exceeding FNHE_RECLAIM_DEPTH+random.
The race window is between fnhe_remove_oldest() selecting fnheX for
deletion and the subsequent kfree_rcu(). During this time, the
concurrent path's __mkroute_output() -> find_exception() can fetch the
soon-to-be-deleted fnheX, and rt_bind_exception() then binds it with a
new dst using a dst_hold(). When the original fnheX is freed via RCU,
the dst reference remains permanently leaked.
CPU 0 CPU 1
__mkroute_output()
find_exception() [fnheX]
update_or_create_fnhe()
fnhe_remove_oldest() [fnheX]
rt_bind_exception() [bind dst]
RCU callback [fnheX freed, dst leak]
This issue manifests as a device reference count leak and a warning in
dmesg when unregistering the net device:
unregister_netdevice: waiting for sitX to become free. Usage count = N
Ido Schimmel provided the simple test validation method [1].
The fix clears 'oldest->fnhe_daddr' before calling fnhe_flush_routes().
Since rt_bind_exception() checks this field, setting it to zero prevents
the stale fnhe from being reused and bound to a new dst just before it
is freed.
[1]
ip netns add ns1
ip -n ns1 link set dev lo up
ip -n ns1 address add 192.0.2.1/32 dev lo
ip -n ns1 link add name dummy1 up type dummy
ip -n ns1 route add 192.0.2.2/32 dev dummy1
ip -n ns1 link add name gretap1 up arp off type gretap \
local 192.0.2.1 remote 192.0.2.2
ip -n ns1 route add 198.51.0.0/16 dev gretap1
taskset -c 0 ip netns exec ns1 mausezahn gretap1 \
-A 198.51.100.1 -B 198.51.0.0/16 -t udp -p 1000 -c 0 -q &
taskset -c 2 ip netns exec ns1 mausezahn gretap1 \
-A 198.51.100.1 -B 198.51.0.0/16 -t udp -p 1000 -c 0 -q &
sleep 10
ip netns pids ns1 | xargs kill
ip netns del ns1
Cc: stable@vger.kernel.org
Fixes: 67d6d681e1 ("ipv4: make exception cache less predictible")
Signed-off-by: Chuang Wang <nashuiliang@gmail.com>
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Link: https://patch.msgid.link/20251111064328.24440-1-nashuiliang@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Linus Torvalds
Jakub Kicinski
Russell King (Oracle)
Dimitri Daskalakis
Bjorn Helgaas
Haotian Zhang
Dave Jiang
Cryolitia PukNgae
Gopi Krishna Menon
Emil Tsalapatis
Chu Guangqing
Marc Kleine-Budde
Gregor Herburger
javen
Srinivas Pandruvada
Zqiang
Caleb Sander Mateos
Alex Mastro
Eric Dumazet
Chuang Wang
Imre Deak