The LED setup routine registered both led_sync_good
and led_is_gm devices without checking the return
values of led_classdev_register(). If either registration
failed, the function continued silently, leaving the
driver in a partially-initialized state and leaking
a registered LED classdev.
Add proper error handling
Fixes: 7d9ee2e8ff ("net: dsa: hellcreek: Add PTP status LEDs")
Signed-off-by: Pavel Zhigulin <Pavel.Zhigulin@kaspersky.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Acked-by: Kurt Kanzenbach <kurt@linutronix.de>
Link: https://patch.msgid.link/20251113135745.92375-1-Pavel.Zhigulin@kaspersky.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The XDP qstats tests send 2k packets over a single socket.
Looks like when netdev CI is busy running those tests in QEMU
occasionally flakes. The target doesn't get to run at all
before all 2000 packets are sent.
Lower the number of packets to 1000 and reopen the socket
every 50 packets, to give RSS a chance to spread the packets
to multiple queues.
For the netdev CI testing either lowering the count or using
multiple sockets is enough, but let's do both for extra resiliency.
Acked-by: Stanislav Fomichev <sdf@fomichev.me>
Link: https://patch.msgid.link/20251113152703.3819756-1-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
When an IPv6 address with a finite lifetime (configured with valid_lft
and preferred_lft) is manually deleted, the kernel does not clean up the
associated prefix route. This results in orphaned routes (marked "proto
kernel") remaining in the routing table even after their corresponding
address has been deleted.
This is particularly problematic on networks using combination of SLAAC
and bridges.
1. Machine comes up and performs RA on eth0.
2. User creates a bridge
- does an ip -6 addr flush dev eth0;
- adds the eth0 under the bridge.
3. SLAAC happens on br0.
Even tho the address has "moved" to br0 there will still be a route
pointing to eth0, but eth0 is not usable for IP any more.
Reviewed-by: David Ahern <dsahern@kernel.org>
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Link: https://patch.msgid.link/20251113031700.3736285-1-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Pull pci fixes from Bjorn Helgaas:
- Cache the ASPM L0s/L1 Supported bits early so quirks can override
them if necessary (Bjorn Helgaas)
- Add quirks for PA Semi and Freescale Root Ports and a HiSilicon Wi-Fi
device that are reported to have broken L0s and L1 (Shawn Lin, Bjorn
Helgaas)
* tag 'pci-v6.18-fixes-5' of git://git.kernel.org/pub/scm/linux/kernel/git/pci/pci:
PCI/ASPM: Avoid L0s and L1 on Hi1105 [19e5:1105] Wi-Fi
PCI/ASPM: Avoid L0s and L1 on PA Semi [1959:a002] Root Ports
PCI/ASPM: Avoid L0s and L1 on Freescale [1957:0451] Root Ports
PCI/ASPM: Convert quirks to override advertised link states
PCI/ASPM: Add pcie_aspm_remove_cap() to override advertised link states
PCI/ASPM: Cache L0s/L1 Supported so advertised link states can be overridden
Pull bpf fixes from Alexei Starovoitov:
- Fix interaction between livepatch and BPF fexit programs (Song Liu)
With Steven and Masami acks.
- Fix stack ORC unwind from BPF kprobe_multi (Jiri Olsa)
With Steven and Masami acks.
- Fix out of bounds access in widen_imprecise_scalars() in the verifier
(Eduard Zingerman)
- Fix conflicts between MPTCP and BPF sockmap (Jiayuan Chen)
- Fix net_sched storage collision with BPF data_meta/data_end (Eric
Dumazet)
- Add _impl suffix to BPF kfuncs with implicit args to avoid breaking
them in bpf-next when KF_IMPLICIT_ARGS is added (Mykyta Yatsenko)
* tag 'bpf-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf:
selftests/bpf: Test widen_imprecise_scalars() with different stack depth
bpf: account for current allocated stack depth in widen_imprecise_scalars()
bpf: Add bpf_prog_run_data_pointers()
selftests/bpf: Add mptcp test with sockmap
mptcp: Fix proto fallback detection with BPF
mptcp: Disallow MPTCP subflows from sockmap
selftests/bpf: Add stacktrace ips test for raw_tp
selftests/bpf: Add stacktrace ips test for kprobe_multi/kretprobe_multi
x86/fgraph,bpf: Fix stack ORC unwind from kprobe_multi return probe
Revert "perf/x86: Always store regs->ip in perf_callchain_kernel()"
bpf: add _impl suffix for bpf_stream_vprintk() kfunc
bpf:add _impl suffix for bpf_task_work_schedule* kfuncs
selftests/bpf: Add tests for livepatch + bpf trampoline
ftrace: bpf: Fix IPMODIFY + DIRECT in modify_ftrace_direct()
ftrace: Fix BPF fexit with livepatch
Pull Rust fix from Miguel Ojeda:
- Fix a Rust 1.91.0 build issue due to 'bindings.o' not containing
DWARF debug information anymore by teaching gendwarfksyms to skip
object files without exports
* tag 'rust-fixes-6.18-2' of git://git.kernel.org/pub/scm/linux/kernel/git/ojeda/linux:
gendwarfksyms: Skip files with no exports
Pull NFS client fixes from Anna Schumaker:
- Various fixes when using NFS with TLS
- Localio direct-IO fixes
- Fix error handling in nfs_atomic_open_v23()
- Fix sysfs memory leak when nfs_client kobject add fails
- Fix an incorrect parameter when calling nfs4_call_sync()
- Fix a failing LTP test when using delegated timestamps
* tag 'nfs-for-6.18-3' of git://git.linux-nfs.org/projects/anna/linux-nfs:
NFS: Fix LTP test failures when timestamps are delegated
NFSv4: Fix an incorrect parameter when calling nfs4_call_sync()
NFS: sysfs: fix leak when nfs_client kobject add fails
NFSv2/v3: Fix error handling in nfs_atomic_open_v23()
nfs/localio: do not issue misaligned DIO out-of-order
nfs/localio: Ensure DIO WRITE's IO on stable storage upon completion
nfs/localio: backfill missing partial read support for misaligned DIO
nfs/localio: add refcounting for each iocb IO associated with NFS pgio header
nfs/localio: remove unecessary ENOTBLK handling in DIO WRITE support
NFS: Check the TLS certificate fields in nfs_match_client()
pnfs: Set transport security policy to RPC_XPRTSEC_NONE unless using TLS
pnfs: Fix TLS logic in _nfs4_pnfs_v4_ds_connect()
pnfs: Fix TLS logic in _nfs4_pnfs_v3_ds_connect()
Pull drm fixes from Dave Airlie:
"Weekly fixes, amdgpu and vmwgfx making up the most of it, along with
panthor and i915/xe.
Seems about right for this time of development, nothing major
outstanding.
client:
- Fix description of module parameter
panthor:
- Flush writes before mapping buffers
vmwgfx:
- Improve command validation
- Improve ref counting
- Fix cursor-plane support
amdgpu:
- Disallow P2P DMA for GC 12 DCC surfaces
- ctx error handling fix
- UserQ fixes
- VRR fix
- ISP fix
- JPEG 5.0.1 fix
amdkfd:
- Save area check fix
- Fix GPU mappings for APU after prefetch
i915:
- Fix PSR's pipe to vblank conversion
- Disable Panel Replay on MST links
xe:
- New HW workarounds affecting PTL and WCL platforms
* tag 'drm-fixes-2025-11-15' of https://gitlab.freedesktop.org/drm/kernel:
drm/client: fix MODULE_PARM_DESC string for "active"
drm/i915/dp_mst: Disable Panel Replay
drm/amdkfd: Fix GPU mappings for APU after prefetch
drm/amdkfd: relax checks for over allocation of save area
drm/amdgpu/jpeg: Add parse_cs for JPEG5_0_1
drm/amd/amdgpu: Ensure isp_kernel_buffer_alloc() creates a new BO
drm/amd/display: Allow VRR params change if unsynced with the stream
drm/amdgpu: fix lock warning in amdgpu_userq_fence_driver_process
drm/amdgpu: jump to the correct label on failure
drm/amdgpu: disable peer-to-peer access for DCC-enabled GC12 VRAM surfaces
drm/xe/xe3lpg: Extend Wa_15016589081 for xe3lpg
drm/xe/xe3: Extend wa_14023061436
drm/xe/xe3: Add WA_14024681466 for Xe3_LPG
drm/i915/psr: fix pipe to vblank conversion
drm/panthor: Flush shmem writes before mapping buffers CPU-uncached
drm/vmwgfx: Restore Guest-Backed only cursor plane support
drm/vmwgfx: Use kref in vmw_bo_dirty
drm/vmwgfx: Validate command header size against SVGA_CMD_MAX_DATASIZE
TEE kernel-doc fixes for v6.18
* tag 'tee-fix-for-v6.18' of git://git.kernel.org/pub/scm/linux/kernel/git/jenswi/linux-tee:
tee: <uapi/linux/tee.h: fix all kernel-doc issues
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
This pull request contains Broadcom ARM64-based SoCs Device Tree fixes
for 6.18, please pull the following:
- Andrea assigns clocks rates for the Ethernet controller for the
Raspberry Pi 5 systems
- Laurent adds an ethernet0 alias to allow client programs consuming
that alias to populate the correct Ethernet address for the Raspberry
Pi 5 systems
* tag 'arm-soc/for-6.18/devicetree-arm64-fixes-v2' of https://github.com/Broadcom/stblinux:
arm64: dts: broadcom: bcm2712: rpi-5: Add ethernet0 alias
arm64: dts: broadcom: Assign clock rates in eth node for RPi5
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Reset controller fixes for v6.18
* Fix incorrect EARC reset masks in the reset-imx8mp-audiomix driver,
introduced in commit a83bc87cd3.
* tag 'reset-fixes-for-v6.18' of https://git.pengutronix.de/git/pza/linux:
reset: imx8mp-audiomix: Fix bad mask values
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
This pull request contains Broadcom ARM-based SoCs Device Tree files updates
for 6.18, please pull the following:
- Rafal fixes the Ethernet PHY address on the Luxul XAP-1440
* tag 'arm-soc/for-6.18/devicetree-fixes-part2' of https://github.com/Broadcom/stblinux:
ARM: dts: BCM53573: Fix address of Luxul XAP-1440's Ethernet PHY
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
This pull request contains Broadcom ARM64 defconfig updates for 6.18,
please pull the following:
- Stefan ensures that the clk-raspberrypi driver which is now the clock
provider is built into the kernel image to satisfy root over NFS
* tag 'arm-soc/for-6.18/defconfig-arm64-fixes' of https://github.com/Broadcom/stblinux:
arm64: defconfig: Fix V3D deferred probe timeout
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Memory controller drivers - fixes for v6.18
Correct incorrect ID used for the memory controller client IDs in
Tegra210 Memory Controller driver, introduced in v6.18-rc1.
* tag 'memory-controller-drv-fixes-6.18' of https://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux-mem-ctrl:
memory: tegra210: Fix incorrect client ids
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Pull spi fixes from Mark Brown:
"A few standard fixes here, plus one more interesting one from Hans
which addresses an issue where a move in when we requested GPIOs on
ACPI systems caused us to stop doing pinmuxing and leave things
floating that we'd really rather not have floating"
* tag 'spi-fix-v6.18-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi:
spi: Add TODO comment about ACPI GPIO setup
spi: xilinx: increase number of retries before declaring stall
spi: imx: keep dma request disabled before dma transfer setup
spi: Try to get ACPI GPIO IRQ earlier
First batch of ASPEED fixes for 6.18
This time it's just the one fix addressing a PHY configuration regression in the
Fuji (Meta) platform's mac3 devicetree node.
* tag 'aspeed-6.18-fixes-0' of https://git.kernel.org/pub/scm/linux/kernel/git/bmc/linux:
ARM: dts: aspeed: fuji-data64: Enable mac3 controller
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
arm64: tegra: Fixes for v6.18
This contains a simple fix to mark the Ethernet PHY on Jetson Xavier NX
as a wakeup source so the device can support WoL.
* tag 'tegra-for-6.18-arm64-dt-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux:
arm64: tegra: Mark Jetson Xavier NX's PHY as a wakeup source
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Pull regulator fix from Mark Brown:
"One simple fix for a GPIO descriptor leak in the probe error handling
for the fixed regulator"
* tag 'regulator-fix-v6.18-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator:
regulator: fixed: fix GPIO descriptor leak on register failure
Pull sound fixes from Takashi Iwai:
"A collection of small fixes. All changes are device-specific, and
nothing stands out.
- A regression fix for HD-audio HDMI probe
- USB-audio hardening patches for issues spotted by fuzzers
- ASoC fixes for TAS278x, SoundWire and Cirrus
- Usual HD-audio and USB-audio quirks"
* tag 'sound-6.18-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound:
ALSA: usb-audio: Add native DSD quirks for PureAudio DAC series
ASoC: rsnd: fix OF node reference leak in rsnd_ssiu_probe()
ALSA: hda/tas2781: Correct the wrong project ID
ALSA: usb-audio: Fix NULL pointer dereference in snd_usb_mixer_controls_badd
ASoC: SDCA: bug fix while parsing mipi-sdca-control-cn-list
ALSA: usb-audio: Fix potential overflow of PCM transfer buffer
ALSA: hda/tas2781: Add new quirk for HP new projects
ASoC: tas2781: fix getting the wrong device number
ASoC: codecs: va-macro: fix resource leak in probe error path
ASoC: tas2783A: Fix issues in firmware parsing
ASoC: sdw_utils: fix device reference leak in is_sdca_endpoint_present()
ASoC: cs4271: Fix regulator leak on probe failure
ALSA: hda/hdmi: Fix breakage at probing nvhdmi-mcp driver
ASoC: da7213: Use component driver suspend/resume
ALSA: usb-audio: add min_mute quirk for SteelSeries Arctis
ASoC: doc: cs35l56: Update firmware filename description for B0 silicon
Pull block fixlet from Jens Axboe:
"Been sitting on this one for a week or two, planning on sending it out
when there were other block changes for 6.18. But as that hasn't
materialized in the second week of sitting on it, let's flush it out.
A previous commit updated my git tree locations, but one was missed as
it was already set to the git.kernel.org one. But the git location swap
also renamed the actual tree from linux-block to just linux, let's get
that last one updated too"
* tag 'block-6.18-20251114' of git://git.kernel.org/pub/scm/linux/kernel/git/axboe/linux:
MAINTAINERS: correct git location for block layer tree
Pull io_uring fixes from Jens Axboe:
- Use the actual segments in a request when for bvec based buffers
- Fix an odd case where the iovec might get leaked for a read/write
request, if it was newly allocated, overflowed the alloc cache, and
hit an early error
- Minor tweak to the query API added in this release, returning the
number of available entries
* tag 'io_uring-6.18-20251113' of git://git.kernel.org/pub/scm/linux/kernel/git/axboe/linux:
io_uring/rsrc: don't use blk_rq_nr_phys_segments() as number of bvecs
io_uring/query: return number of available queries
io_uring/rw: ensure allocated iovec gets cleared for early failure
A test case for a situation when widen_imprecise_scalars() is called
with old->allocated_stack > cur->allocated_stack. Test structure:
def widening_stack_size_bug():
r1 = 0
for r6 in 0..1:
iterator_with_diff_stack_depth(r1)
r1 = 42
def iterator_with_diff_stack_depth(r1):
if r1 != 42:
use 128 bytes of stack
iterator based loop
iterator_with_diff_stack_depth() is verified with r1 == 0 first and
r1 == 42 next. Causing stack usage of 128 bytes on a first visit and 8
bytes on a second. Such arrangement triggered a KASAN error in
widen_imprecise_scalars().
Signed-off-by: Eduard Zingerman <eddyz87@gmail.com>
Link: https://lore.kernel.org/r/20251114025730.772723-2-eddyz87@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
The usage pattern for widen_imprecise_scalars() looks as follows:
prev_st = find_prev_entry(env, ...);
queued_st = push_stack(...);
widen_imprecise_scalars(env, prev_st, queued_st);
Where prev_st is an ancestor of the queued_st in the explored states
tree. This ancestor is not guaranteed to have same allocated stack
depth as queued_st. E.g. in the following case:
def main():
for i in 1..2:
foo(i) // same callsite, differnt param
def foo(i):
if i == 1:
use 128 bytes of stack
iterator based loop
Here, for a second 'foo' call prev_st->allocated_stack is 128,
while queued_st->allocated_stack is much smaller.
widen_imprecise_scalars() needs to take this into account and avoid
accessing bpf_verifier_state->frame[*]->stack out of bounds.
Fixes: 2793a8b015 ("bpf: exact states comparison for iterator convergence checks")
Reported-by: Emil Tsalapatis <emil@etsalapatis.com>
Signed-off-by: Eduard Zingerman <eddyz87@gmail.com>
Link: https://lore.kernel.org/r/20251114025730.772723-1-eddyz87@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
syzbot found that cls_bpf_classify() is able to change
tc_skb_cb(skb)->drop_reason triggering a warning in sk_skb_reason_drop().
WARNING: CPU: 0 PID: 5965 at net/core/skbuff.c:1192 __sk_skb_reason_drop net/core/skbuff.c:1189 [inline]
WARNING: CPU: 0 PID: 5965 at net/core/skbuff.c:1192 sk_skb_reason_drop+0x76/0x170 net/core/skbuff.c:1214
struct tc_skb_cb has been added in commit ec624fe740 ("net/sched:
Extend qdisc control block with tc control block"), which added a wrong
interaction with db58ba4592 ("bpf: wire in data and data_end for
cls_act_bpf").
drop_reason was added later.
Add bpf_prog_run_data_pointers() helper to save/restore the net_sched
storage colliding with BPF data_meta/data_end.
Fixes: ec624fe740 ("net/sched: Extend qdisc control block with tc control block")
Reported-by: syzbot <syzkaller@googlegroups.com>
Closes: https://lore.kernel.org/netdev/6913437c.a70a0220.22f260.013b.GAE@google.com/
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
Reviewed-by: Victor Nogueira <victor@mojatatu.com>
Acked-by: Jamal Hadi Salim <jhs@mojatatu.com>
Link: https://patch.msgid.link/20251112125516.1563021-1-edumazet@google.com
Pull crypto fix from Herbert Xu:
- Fix device reference leak in hisilicon
* tag 'v6.18-p5' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6:
crypto: hisilicon/qm - Fix device reference leak in qm_get_qos_value
Pull smb client fixes from Steve French:
- Multichannel reconnect channel selection fix
- Fix for smbdirect (RDMA) disconnect bug
- Fix for incorrect username length check
- Fix memory leak in mount parm processing
* tag 'v6.18-rc5-smb-client-fixes' of git://git.samba.org/sfrench/cifs-2.6:
smb: client: let smbd_disconnect_rdma_connection() turn CREATED into DISCONNECTED
smb: fix invalid username check in smb3_fs_context_parse_param()
cifs: client: fix memory leak in smb3_fs_context_parse_param
smb: client: fix cifs_pick_channel when channel needs reconnect
The irq_domain_free_irqs() helper requires that the irq_domain_ops->free
callback is implemented. Otherwise, the kernel reports the warning message
"NULL pointer, cannot free irq" when irq_dispose_mapping() is invoked to
release the per-HART local interrupts.
Set irq_domain_ops->free to irq_domain_free_irqs_top() to cure that.
Fixes: 832f15f426 ("RISC-V: Treat IPIs as normal Linux IRQs")
Signed-off-by: Nick Hu <nick.hu@sifive.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://patch.msgid.link/20251114-rv-intc-fix-v1-1-a3edd1c1a868@sifive.com
When a zero ASCE is passed to the __ptep_rdp() inline assembly, the
generated instruction should have the R3 field of the instruction set to
zero. However the inline assembly is written incorrectly: for such cases a
zero is loaded into a register allocated by the compiler and this register
is then used by the instruction.
This means that selected TLB entries may not be flushed since the specified
ASCE does not match the one which was used when the selected TLB entries
were created.
Fix this by removing the asce and opt parameters of __ptep_rdp(), since
all callers always pass zero, and use a hard-coded register zero for
the R3 field.
Fixes: 0807b85652 ("s390/mm: add support for RDP (Reset DAT-Protection)")
Cc: stable@vger.kernel.org
Reviewed-by: Gerald Schaefer <gerald.schaefer@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
The PureAudio APA DAC and Lotus DAC5 series are USB Audio
2.0 Class devices that support native Direct Stream Digital (DSD)
playback via specific vendor protocols.
Without these quirks, the devices may only function in standard
PCM mode, or fail to correctly report their DSD format capabilities
to the ALSA framework, preventing native DSD playback under Linux.
This commit adds new quirk entries for the mentioned DAC models
based on their respective Vendor/Product IDs (VID:PID), for example:
0x16d0:0x0ab1 (APA DAC), 0x16d0:0xeca1 (DAC5 series), etc.
The quirk ensures correct DSD format handling by setting the required
SNDRV_PCM_FMTBIT_DSD_U32_BE format bit and defining the DSD-specific
Audio Class 2.0 (AC2.0) endpoint configurations. This allows the ALSA
DSD API to correctly address the device for high-bitrate DSD streams,
bypassing the need for DoP (DSD over PCM).
Test on APA DAC and Lotus DAC5 SE under Arch Linux.
Tested-by: Lushih Hsieh <bruce@mail.kh.edu.tw>
Signed-off-by: Lushih Hsieh <bruce@mail.kh.edu.tw>
Link: https://patch.msgid.link/20251114052053.54989-1-bruce@mail.kh.edu.tw
Signed-off-by: Takashi Iwai <tiwai@suse.de>
The xfrm_add_acquire() function constructs an xfrm policy by calling
xfrm_policy_construct(). This allocates the policy structure and
potentially associates a security context and a device policy with it.
However, at the end of the function, the policy object is freed using
only kfree() . This skips the necessary cleanup for the security context
and device policy, leading to a memory leak.
To fix this, invoke the proper cleanup functions xfrm_dev_policy_delete(),
xfrm_dev_policy_free(), and security_xfrm_policy_free() before freeing the
policy object. This approach mirrors the error handling path in
xfrm_add_policy(), ensuring that all associated resources are correctly
released.
Fixes: 980ebd2579 ("[IPSEC]: Sync series - acquire insert")
Signed-off-by: Zilin Guan <zilin@seu.edu.cn>
Reviewed-by: Sabrina Dubroca <sd@queasysnail.net>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
ASoC: Fixes for v6.18
A small collection of fixes, all driver specific and none especially
remarkable unless you have the hardware (many not even then).
Lad Prabhakar says:
====================
net: phy: mscc: Add support for PHY LED control
This patch series adds support for controlling the PHY LEDs on the
VSC85xx family of PHYs from Microsemi (now part of Renesas).
The first two patches simplify and consolidate existing probe code
the third patch introduces the LED control functionality.
The LED control feature allows users to configure the LED behavior
based on link activity, speed, and other criteria.
====================
Link: https://patch.msgid.link/20251112135715.1017117-1-prabhakar.mahadev-lad.rj@bp.renesas.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Add support for the PHY LED controller in the MSCC VSC85xx driver. The
implementation provides LED brightness and hardware control through the
LED subsystem and integrates with the standard 'netdev' trigger.
Introduce new register definitions for the LED behavior register
(MSCC_PHY_LED_BEHAVIOR = 30) and the LED combine disable bits, which
control whether LEDs indicate link-only or combined link and activity
status. Implement a helper, vsc8541_led_combine_disable_set(), to update
these bits safely using phy_modify().
Add support for LED brightness control and hardware mode configuration.
The new callbacks implement the standard LED class operations, allowing
user control through sysfs. The brightness control maps to PHY LED force
on/off modes. The hardware control get and set functions translate
between the PHY-specific LED mode encodings and the LED subsystem
TRIGGER_NETDEV_* rules.
The combine feature is managed automatically based on the selected
rules. When both RX and TX activity are disabled, the combine feature is
turned off, causing LEDs to indicate link-only status. When either RX or
TX activity is enabled, the combine feature remains active and LEDs
indicate combined link and activity.
Register the LED callbacks for all VSC85xx PHY variants so that the LED
subsystem can manage their indicators consistently. Existing device tree
LED configuration and default behavior are preserved.
Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://patch.msgid.link/20251112135715.1017117-4-prabhakar.mahadev-lad.rj@bp.renesas.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Unify the probe implementations of the VSC85xx PHY family into a single
vsc85xx_probe_common() helper. The existing probe functions for the
vsc85xx, vsc8514, vsc8574, and vsc8584 variants contained almost
identical initialization logic, differing only in configuration
parameters such as the number of LEDs, supported LED modes, hardware
statistics, and PTP support.
Introduce a vsc85xx_probe_config structure to describe the per-variant
parameters, and move all common setup code into the shared helper. Each
variant's probe function now defines a constant configuration instance
and calls vsc85xx_probe_common().
Also mark the default LED mode array parameter as const to match its
usage.
Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://patch.msgid.link/20251112135715.1017117-3-prabhakar.mahadev-lad.rj@bp.renesas.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Pavel Zhigulin
Jakub Kicinski
Dimitri Daskalakis
Linus Torvalds
Arnd Bergmann
Krzysztof Kozlowski
Eduard Zingerman
Eric Dumazet
Eslam Khafagy
Nick Hu
Heiko Carstens
Ville Syrjälä
Lushih Hsieh
Borislav Petkov (AMD)
Mario Limonciello
Luke Wang
Zilin Guan
Takashi Iwai
Dave Airlie
Lad Prabhakar