commit 2d19b95c97 upstream.
TCP and SCTP conntrack paths can emit invalid-packet logs while ct->lock
is still held.
When invalid logging is routed to nfnetlink_log and conntrack export is
enabled, the log path can re-enter conntrack netlink glue and dump the
same conntrack again. Protocol attribute dumping may take ct->lock, so
logging while holding that lock can deadlock.
Defer the TCP invalid logs by storing only the minimal log context while
ct->lock is held and emitting the log after unlocking. Also make the TCP
timeout-lowering invalid path return whether a log is needed, then emit
that log after unlocking.
Do the same for the SCTP invalid state-transition log that can be reached
while ct->lock is held.
Add a lockdep assertion to nf_ct_l4proto_log_invalid() so future callers
that log invalid conntracks while holding ct->lock are caught outside TCP
and SCTP as well.
Fixes: 628d694344 ("netfilter: conntrack: reduce timeout when receiving out-of-window fin or rst")
Fixes: d9a6f0d0df ("netfilter: conntrack: prepare tcp_in_window for ternary return value")
Fixes: f71cb8f45d ("netfilter: conntrack: sctp: use nf log infrastructure for invalid packets")
Cc: stable@vger.kernel.org
Reported-by: Vega <vega@nebusec.ai>
Assisted-by: Codex:gpt-5.4
Signed-off-by: Zihan Xi <zihanx@nebusec.ai>
Reviewed-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit d45cc8020d upstream.
A bridge nftables ct zone set rule can attach a conntrack template to
an skb before nf_ct_bridge_pre() sees it. For non-IPv4 and non-IPv6
EtherTypes, nf_ct_bridge_pre() currently overwrites skb->_nfct with
IP_CT_UNTRACKED without releasing the existing template reference.
That makes the per-cpu template, and any temporary templates allocated
for concurrent use, unreachable and leaks memory until the host runs out
of slab.
Reset the skb conntrack state before marking the frame untracked so the
existing template reference is dropped on the non-IP path.
Fixes: 3c171f496e ("netfilter: bridge: add connection tracking system")
Cc: stable@vger.kernel.org
Reported-by: Vega <vega@nebusec.ai>
Signed-off-by: Zhiling Zou <zhilinz@nebusec.ai>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 0e243671bc upstream.
in6_dev_get() reads dev->ip6_ptr under RCU and then unconditionally
increments its refcount. Device teardown can clear the pointer and drop
the last reference between these operations. The increment then
resurrects an object whose RCU free has already been queued, so callers
can use it after it is freed.
Use refcount_inc_not_zero() and return NULL when the object has already
reached zero. RCU keeps the memory accessible through the attempted
reference acquisition, and a successful increment pins the object for
the caller.
An independent run on the exact unpatched 6f5156d7a3 (v7.2-rc3)
kernel reproduced the invalid reference acquisition as UID 1000:
refcount_t: addition on 0; use-after-free.
ip6_mc_source+0xef4/0x17e0
It was followed by the corresponding reference underflow in
ip6_mc_source(). The supplied trace from the same unpatched revision
additionally shows the access after the RCU read-side section ends:
BUG: KASAN: slab-use-after-free in mutex_lock+0x76/0xe0
Write of size 8 at addr ffff888015b50240 by task poc/1219
Bug found and triaged by OpenAI Security Research and
validated by Trail of Bits.
Fixes: 8814c4b533 ("[IPV6] ADDRCONF: Convert addrconf_lock to RCU.")
Cc: stable@vger.kernel.org
Signed-off-by: Kyle Zeng <kylebot@openai.com>
Co-developed-by: David Lee <david.lee@trailofbits.com>
Signed-off-by: David Lee <david.lee@trailofbits.com>
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Link: https://patch.msgid.link/20260803122758.666112-1-david.lee@trailofbits.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 5d9686af29 upstream.
smc_rx_splice() passes pages to splice_to_pipe() before taking the
references that cover the lifetime of each splice entry. In the
VM-backed RMB path, splice_to_pipe() may drop unqueued entries through
smc_rx_spd_release(), while queued entries are released later via the
pipe buffer callback.
The old post-splice accounting also derives the number of queued VM pages
from an offset mutated while building the descriptor, and a multi-page
splice pairs one sock_hold() with multiple sock_put() calls.
Take the page and socket references for every candidate entry before
splice_to_pipe(), and drop the matching private state, page reference,
and socket reference from smc_rx_spd_release() for entries that never
get queued. This fixes a refcount imbalance that can underflow page
refcounts and trigger a use-after-free.
Fixes: 9014db202c ("smc: add support for splice()")
Cc: stable@vger.kernel.org
Reported-by: Vega <vega@nebusec.ai>
Co-developed-by: Xiao Liu <lx24@stu.ynu.edu.cn>
Signed-off-by: Xiao Liu <lx24@stu.ynu.edu.cn>
Signed-off-by: Daming Li <d4n.for.sec@gmail.com>
Signed-off-by: Ren Wei <enjou1224z@gmail.com>
Reviewed-by: Dust Li <dust.li@linux.alibaba.com>
Reviewed-by: Sidraya Jayagond <sidraya@linux.ibm.com>
Link: https://patch.msgid.link/20260730145552.360287-2-enjou1224z@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit e033cbf397 upstream.
bit_cursor() fetches the glyph under the cursor with
c = scr_readw(vc_pos);
src = vc_font.data + ((c & charmask) * w * height);
where charmask is 0x1ff when vc_hi_font_mask is set. The screen buffer
value comes directly from scr_readw() and may be larger than the current
font's glyph count.
Syzkaller triggers this via vcs_write(). The Call Trace shows
vcs_write() in vc_screen.c writing an arbitrary 16-bit value with
writev() to /dev/vcsa, which vcs_write_buf() in vc_screen.c stores via
vcs_scr_writew() without checking charcount. The stored value is later
read in bit_cursor() in bitblit.c.
When the font is changed from a font with 512 glyphs to a font with
256 glyphs, the screen buffer can retain characters with the high
bit set from the previous mode, which could also produce the same
out-of-bounds access.
BUG: KASAN: global-out-of-bounds in soft_cursor+0x378/0x6bc drivers/video/fbdev/core/softcursor.c:70
Read of size 16 at addr ffff800086c57970
Call Trace:
soft_cursor+0x378/0x6bc drivers/video/fbdev/core/softcursor.c:70
bit_cursor+0xa90/0x1108 drivers/video/fbdev/core/bitblit.c:365
fbcon_cursor+0x344/0x498 drivers/video/fbdev/core/fbcon.c:1427
hide_cursor+0xdc/0x2d0 drivers/tty/vt/vt.c:883
update_region+0x100/0x18c drivers/tty/vt/vt.c:669
vcs_write+0x8ec/0xaf0 drivers/tty/vt/vc_screen.c:685
bit_putcs_aligned() and bit_putcs_unaligned() already clamp the glyph
index to vc_font.charcount. Apply the same clamp in bit_cursor() after
extracting the attribute and masking, before indexing fontdata.
The fix completes the bounds checking started in commit 18c4ef4e76
("fbdev: bitblit: bound-check glyph index in bit_putcs*"), which missed
the cursor path.
This change should be safe because the clamp reuses the existing
contract from fbcon: charcount is maintained under console_lock in
con_font_set() and fbcon_font_set(), and hi_font_mask is cleared when
switching from 512 to 256 glyphs. When stale screen data with high bits
remains after a font switch, or when vcs_write() stores an arbitrary
value, clamping the index to 0 prevents the out-of-bounds read without
changing cursor semantics — the same fallback bit_putcs uses.
Reported-by: syzbot+61b1db46218109869c14@syzkaller.appspotmail.com
Closes: https://syzkaller.appspot.com/bug?extid=61b1db46218109869c14
Link: https://lore.kernel.org/all/6a75205c.01d0871a.3a0d52.0032.GAE@google.com/
Fixes: 18c4ef4e76 ("fbdev: bitblit: bound-check glyph index in bit_putcs*")
Cc: stable@vger.kernel.org
Assisted-by: Hermes:muse-spark-1.2 syzkaller
Signed-off-by: Rik van Riel <riel@surriel.com>
Signed-off-by: Helge Deller <deller@gmx.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit c3730b8373 upstream.
The following sequence may leads race between event_define_fields()
and update_event_fields():
CPU0 (loads module A) CPU1 (loads module B)
=============================== ===============================
load_module(A) load_module(B)
notifier_call_chain notifier_call_chain
trace_module_notify trace_module_notify
mutex_lock(&event_mutex) trace_event_update_all()
trace_module_add_events(A) down_write(&trace_event_sem)
__register_event(call_A)
__add_event_to_tracers(call_A)
event_define_fields(call_A)
for each f: list_for_each_entry(field,
list_add(&f->link, &class->fields, link)
&class->fields) field = class->fields->next;
Where access to the class->fields is not protected by the event_mutex in
trace_event_update_all().
This produces the following panic:
Unable to handle kernel access ... at virtual address 0000000000000018
pc : update_event_fields+0xf8/0x368
Call trace:
update_event_fields+0xf8/0x368
trace_event_update_all+0x7c/0x2b4
trace_module_notify+0x4c/0x1dc
notifier_call_chain+0x84/0x168
blocking_notifier_call_chain_robust+0x64/0xd4
load_module+0x10c8/0x123c
__arm64_sys_finit_module+0x230/0x31c
Fix by taking event_mutex in trace_event_update_all() before
trace_event_sem.
Cc: stable@vger.kernel.org
Fixes: b3bc8547d3 ("tracing: Have TRACE_DEFINE_ENUM affect trace event types as well")
Link: https://patch.msgid.link/2e5730d2-c631-da41-3a3a-ae35bb4895f3@allwinnertech.com
Signed-off-by: Michael Wu <michael@allwinnertech.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 2ca1eea3cd upstream.
snd_us428ctls_vm_fault() turns the faulting page offset into a kernel
address with no bound of any kind:
offset = vmf->pgoff << PAGE_SHIFT;
vaddr = (char *)(...)->us428ctls_sharedmem + offset;
page = virt_to_page(vaddr);
get_page(page);
vmf->page = page;
return 0;
snd_us428ctls_mmap() checks only the length of the mapping, never the
offset, and us428ctls_sharedmem is a single page from
alloc_pages_exact(). For a character device file_mmap_size_max()
returns ULONG_MAX, so the mm layer imposes no ceiling either. Every page
offset above zero resolves to a struct page outside the object, and the
handler installs it into the caller's address space read-write; the vma
is not marked read-only.
The caller picks the page frame with a single mmap() argument and gets
read-write access to a page of kernel memory it does not own; an offset
that lands in an unpopulated vmemmap region oopses instead.
A process that can open the hwdep node of an attached US-X2Y reaches
this after loading the FPGA image through the same node; no capability
check is involved.
On 7.2.0-rc5 (arm64), mmap() with a large offset:
Unable to handle kernel paging request at virtual address fffffdffc45d5ac8
pc : snd_us428ctls_vm_fault+0x68/0x140 [snd_usb_usx2y]
Call trace:
snd_us428ctls_vm_fault+0x68/0x140 [snd_usb_usx2y]
__do_fault
__handle_mm_fault
handle_mm_fault
el0_da
Reject any offset outside the shared region. The pcm hwdep handler in
usx2yhwdeppcm.c computes its address the same way and needs the same
bound.
Discovered by XBOW, triaged by Baul Lee <baul.lee@xbow.com>
Fixes: 1da177e4c3 ("Linux-2.6.12-rc2")
Reported-by: Federico Kirschbaum <federico.kirschbaum@xbow.com>
Reported-by: Baul Lee <baul.lee@xbow.com>
Cc: stable@vger.kernel.org
Signed-off-by: Baul Lee <baul.lee@xbow.com>
Link: https://patch.msgid.link/20260805013445.38283-1-baul.lee@xbow.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 91542863ab upstream.
In test_ringbuffer()'s out_free cleanup loop, the check
`!rb_threads[cpu]` only catches NULL entries and misses entries that
hold an ERR_PTR.
rb_threads[] is static, so unassigned slots are NULL. But when
kthread_run_on_cpu() fails for a cpu, it stores ERR_PTR(-ENOMEM) (or
-EINTR) in rb_threads[cpu] before the creation loop jumps to out_free.
That entry is non-NULL, so the old `!ptr` check does not break, and the
cleanup proceeds to call kthread_stop() on the ERR_PTR. kthread_stop()
then dereferences the bogus pointer, crashing the kernel during the
late_initcall self-test.
crash logs:
BUG: kernel NULL pointer dereference, address: 000000000000001c
Oops: 0002 [#1] SMP NOPTI
CPU: 1 PID: 1 Comm: swapper/0 Not tainted 7.2.0-rc6-dirty #7 PREEMPT(lazy)
RIP: 0010:kthread_stop+0x2e/0x220
RBX: fffffffffffffff4
CR2: 000000000000001c
Call Trace:
<TASK>
test_ringbuffer+0x1ec/0x650
do_one_initcall+0x6c/0x2c0
kernel_init_freeable+0x21d/0x420
kernel_init+0x15/0x1c0
ret_from_fork+0x21b/0x320
</TASK>
Kernel panic - not syncing: Fatal exception
Cc: stable@vger.kernel.org
Fixes: 64ed3a049e ("ring-buffer: make use of the helper function kthread_run_on_cpu()")
Link: https://patch.msgid.link/20260807154145.2846521-2-sh_def@163.com
Signed-off-by: Hui Su <sh_def@163.com>
Reviewed-by: Vincent Donnefort <vdonnefort@google.com>
Acked-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 6102ceb4ea upstream.
fastrpc_req_munmap_impl() is called to unmap any buffer. The buffer is
getting removed from the list after it is unmapped from DSP. This can
create potential race conditions if multiple threads invoke unmap
concurrently, where one thread may remove the entry from the list while
another thread's unmap operation is still ongoing.
Fix this by removing the buffer entry from the list before calling the
unmap operation. If the unmap fails, the entry is re-added to the list
so that userspace can retry the unmap, or alternatively, the buffer
will be cleaned up during device release when the DSP process is torn
down and all DSP-side mappings are freed along with remaining buffers
in the list.
Fixes: 2419e55e53 ("misc: fastrpc: add mmap/unmap support")
Cc: stable@kernel.org
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Signed-off-by: Ekansh Gupta <ekansh.gupta@oss.qualcomm.com>
Signed-off-by: Jianping Li <jianping.li@oss.qualcomm.com>
Signed-off-by: Srinivas Kandagatla <srini@kernel.org>
Link: https://patch.msgid.link/20260724223342.629168-3-srini@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 6829665d05 upstream.
rtw_cfg80211_monitor_if_xmit_entry() removes the radiotap header and
then reads the 802.11 frame control field without checking that a base
802.11 header remains.
The data path also pulls the calculated 802.11, QoS and SNAP header
span before confirming that the skb contains it. A truncated frame can
therefore cause out-of-bounds reads or leave insufficient data for the
Ethernet address writes.
Reject frames that do not contain the base 802.11 header and data
frames that do not contain their complete calculated header span.
Fixes: 554c0a3abf ("staging: Add rtl8723bs sdio wifi driver")
Cc: stable <stable@kernel.org>
Signed-off-by: Mariano Baragiola <mbaragiola@linux.com>
Link: https://patch.msgid.link/20260727160859.1917096-1-mbaragiola@linux.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 2c56ef658a upstream.
The WEP shared-key authentication handler uses the challenge-text
element's attacker-controlled length without checking it against the
fixed 128-byte chg_txt buffer.
In OnAuthClient() the length from rtw_get_ie() - up to 255 - is used
to perform memcpy() into the 128-byte pmlmeinfo->chg_txt, so a
malicious AP sending a malformed WLAN_EID_CHALLENGE element can
overflow/underfill chg_txt by up to 127 bytes. It is reachable over the
air, before association, during shared-key authentication. In the case
of an overflow, the driver can write out of bounds. In the case of an
underfill, the driver can echo stale buffer memory.
The challenge text is defined to be exactly 128 octets, which is
already provided as the WLAN_AUTH_CHALLENGE_LEN define; require the
element to be exactly that length before use.
Fixes: 554c0a3abf ("staging: Add rtl8723bs sdio wifi driver")
Cc: stable <stable@kernel.org>
Signed-off-by: Panagiotis Petrakopoulos <npetrakopoulos2003@gmail.com>
Link: https://patch.msgid.link/20260720082409.168379-1-npetrakopoulos2003@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit ae21407350 upstream.
WMM_param_handler() copies a fixed-size WMM parameter element out of a
received information element without checking that the element is long
enough, causing an out-of-bounds read for a short WMM IE.
The handler reads sizeof(struct WMM_para_element) (18) bytes at
pIE->data + 6, so it requires pIE->length to be at least 24
(WLAN_WMM_LEN), but it never validates the length. Two of its three
callers reach it after matching only the WMM OUI: OnAssocRsp() in
rtw_mlme_ext.c matches a 6-byte OUI, and join_cmd_hdl() matches a
4-byte OUI, before calling the handler. A vendor-specific IE carrying
the WMM OUI but a length between 6 and 23, placed in an association
response or in the IE blob handed to join_cmd_hdl(), passes the OUI
check and then makes the memcmp() and memcpy() at pIE->data + 6 read
past the end of the element. OnAssocRsp() parses a frame received from
the AP, so this is reachable from a remote peer.
The remaining caller in rtw_wlan_util.c already guards the handler with
"pIE->length == WLAN_WMM_LEN". Move the equivalent check into the
handler itself so every caller is covered; the sibling IE handlers in
the same parsing loop (HT_caps_handler(), HT_info_handler(),
ERP_IE_handler()) likewise bound their accesses by pIE->length.
Fixes: 554c0a3abf ("staging: Add rtl8723bs sdio wifi driver")
Cc: stable@vger.kernel.org
Signed-off-by: Muhammad Bilal <meatuni001@gmail.com>
Link: https://patch.msgid.link/20260719041509.97894-1-meatuni001@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 1c3e23e788 upstream.
rtw_get_wpa_ie() reads bytes at fixed offsets into a vendor-specific
information element without checking that the element is long enough,
causing an out-of-bounds read for a short trailing IE.
The function locates a vendor-specific IE (EID 221) with rtw_get_ie()
and then compares a 4-byte OUI+type at pbuf + 2 and reads a 2-byte
version word at pbuf + 6. Those accesses require the IE body to be at
least 6 bytes, but rtw_get_ie() only guarantees that the element fits
within the buffer; it does not enforce a minimum body length. A
vendor-specific IE whose length byte is 0 to 5, placed at the end of
the buffer, therefore makes these reads run past the end of the IE and
past the end of the buffer itself.
The buffer holds information elements taken from received management
frames and from the IE blob passed to rtw_cfg80211_set_wpa_ie(), which
is kmemdup'd to its exact length, so the read can run off the end of
the allocation.
The sibling helpers rtw_get_sec_ie(), rtw_get_wapi_ie() and
rtw_get_wps_ie() in this file already reject too-short vendor-specific
IEs before their OUI memcmp(); rtw_get_wpa_ie() was never brought in
line with them, and needs a minimum of 6 rather than 4 bytes because
of the version word. Add the missing length check.
Fixes: 554c0a3abf ("staging: Add rtl8723bs sdio wifi driver")
Cc: stable <stable@kernel.org>
Signed-off-by: Muhammad Bilal <meatuni001@gmail.com>
Link: https://patch.msgid.link/20260719030631.88254-1-meatuni001@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit e2fe6a0efe upstream.
serial8250_release_dma() terminates RX DMA and releases the channel, but
leaves rx_running set. If the port is closed while an RX transfer is
active, the stale state remains while rxchan is NULL until the channel is
requested again on the next open.
The DesignWare BUSY workaround added by commit a7b9ce39fb
("serial: 8250_dw: Ensure BUSY is deasserted") calls
serial8250_rx_dma_flush() from the LCR write path during startup. This
happens before serial8250_request_dma() obtains a new RX channel. On
reopen, the stale rx_running state therefore makes the flush path pass a
NULL channel to dmaengine_pause(), causing a kernel Oops.
Clear rx_running after terminating RX DMA, matching the TX cleanup. Also
make the flush helper return if the DMA object or RX channel is not
available so startup and teardown paths cannot pass a NULL channel to the
DMAengine API.
Fixes: 0fcb7901f9 ("tty: serial: 8250_dma: keep own book keeping about RX transfers")
Cc: stable <stable@kernel.org>
Signed-off-by: Cunhao Lu <1579567540@qq.com>
Link: https://patch.msgid.link/tencent_9EE2945F4C933B4D810C73C2D7485E000F06@qq.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit bc5bde9ce3 upstream.
fib_nhc_update_mtu() walks the nexthop exception table under RTNL, but
RTNL does not serialize this walk with PMTU exception updates. The walk
uses rcu_dereference_protected() with a constant true condition without
holding fnhe_lock.
The following interleaving can therefore occur:
CPU 0 CPU 1
fib_nhc_update_mtu() update_or_create_fnhe()
load fnhe spin_lock_bh(&fnhe_lock)
fnhe_remove_oldest()
unlink fnhe
kfree_rcu(fnhe, rcu)
<quiescent state>
access fnhe after grace period
KASAN reported:
BUG: KASAN: slab-use-after-free in fib_nhc_update_mtu+0x3df/0x410
Read of size 8 at addr ffff888107d49000 by task poc/90
Call Trace:
fib_nhc_update_mtu+0x3df/0x410
fib_sync_mtu+0x7a/0xd0
fib_netdev_event+0x229/0x3f0
netif_set_mtu_ext+0x33a/0x570
dev_set_mtu+0x88/0x120
The same walk updates fnhe_pmtu and fnhe_mtu_locked. These fields form a
pair and other writers serialize them with fnhe_lock. RCU alone prevents
reclamation, but would still allow concurrent writers to leave a mixed
pair.
Walk the table under RCU and acquire fnhe_lock only while updating each
exception. RCU keeps the current entry alive while the short critical
section serializes its paired PMTU fields. This avoids holding the global
lock while scanning all 2048 buckets for every nexthop.
Fixes: af7d6cce53 ("net: ipv4: update fnhe_pmtu when first hop's MTU changes")
Cc: stable@vger.kernel.org
Suggested-by: Ido Schimmel <idosch@nvidia.com>
Signed-off-by: Chengfeng Ye <nicoyip.dev@gmail.com>
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Link: https://patch.msgid.link/20260807181710.1178747-1-nicoyip.dev@gmail.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 4ff9548d84 upstream.
fib_nlmsg_size() still estimates nexthop space as if every gateway is
encoded as an IPv4 RTA_GATEWAY attribute. IPv4 routes can also carry an
IPv6 gateway, which fib_nexthop_info() dumps as RTA_VIA.
As a result, route notifications can allocate an skb that is too small.
fib_dump_info() then fails with -EMSGSIZE and rtmsg_fib() hits the
WARN_ON() that marks such failures as a fib_nlmsg_size() bug. With
panic_on_warn set, this becomes a kernel panic.
Mirror the actual nexthop dump layout in fib_nlmsg_size(): account for
IPv6 nexthop gateways dumped as RTA_VIA, for the no-header rtnexthop
layout used inside RTA_MULTIPATH, and for RTA_FLOW only when it is
actually present.
Fixes: d15662682d ("ipv4: Allow ipv6 gateway with ipv4 routes")
Cc: stable@vger.kernel.org
Reported-by: Vega <vega@nebusec.ai>
Signed-off-by: Zihan Xi <zihanx@nebusec.ai>
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Link: https://patch.msgid.link/6f53fa797fcaeb26966432ed7ae9bb87c4961f37.1785411220.git.zihanx@nebusec.ai
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 696c030e1e upstream.
Change mk_users (the set of user claims to an fscrypt master key) from a
'struct key' keyring to a simple linked list.
It's still a collection of 'struct key' for quota tracking. It was
originally thought to be natural that a collection of 'struct key'
should be held in a 'struct key' keyring. In reality, it's just been
causing problems, similar to how using 'struct key' for the filesystem
keyring caused problems and was removed in commit d7e7b9af10
("fscrypt: stop using keyrings subsystem for fscrypt_master_key").
Commit d3a7bd4200 ("fscrypt: clear keyring before calling key_put()")
fixed mk_users cleanup to be synchronous. But that apparently wasn't
enough: the keyring subsystem's redundant locking is still generating
lockdep false positives due to the interaction with filesystem reclaim.
With the simple list, the redundant locking and lockdep issue goes away.
Of course, searching a linked list is linear-time whereas the
'struct key' keyring used a fancy constant-time associative array. But
that's fine here, since in practice there's just one entry in the list.
In fact the new code is much faster in practice, since it's much smaller
and doesn't have to convert the kuid_t into a string to search for it.
Reported-by: syzbot+f55b043dacf43776b50c@syzkaller.appspotmail.com
Closes: https://syzkaller.appspot.com/bug?extid=f55b043dacf43776b50c
Reported-by: Mohammed EL Kadiri <med08elkadiri@gmail.com>
Closes: https://lore.kernel.org/keyrings/20260614150041.21172-1-med08elkadiri@gmail.com/
Fixes: 23c688b540 ("fscrypt: allow unprivileged users to add/remove keys for v2 policies")
Cc: stable@vger.kernel.org
Link: https://patch.msgid.link/20260618221921.87896-1-ebiggers@kernel.org
Signed-off-by: Eric Biggers <ebiggers@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
commit c1492da393 upstream.
The pinctrl and GPIO core code make exceptions for the -ENOTSUPP error
code. One such example is gpio_set_config_with_argument_optional(),
which returns success when gpio_set_config_with_argument() returns
-ENOTSUPP, but reports failure for all other error codes.
Returning -EOPNOTSUPP from the pinctrl driver on the unsupported pinctrl
operation may lead to boot failures when pinctrl drivers implements
struct gpio_chip::set_config, the system uses GPIO hogs, and the
struct gpio_chip::set_config implementation returns -EOPNOTSUPP for the
unsupported operations.
Return -ENOTSUPP for the unsupported pinctrl operation.
Fixes: 560c633d37 ("pinctrl: renesas: rzg2l: Drop oen_read and oen_write callbacks")
Fixes: c4c4637eb5 ("pinctrl: renesas: Add RZ/G2L pin and gpio controller driver")
Cc: stable@vger.kernel.org
Signed-off-by: Claudiu Beznea <claudiu.beznea.uj@bp.renesas.com>
Reviewed-by: Bartosz Golaszewski <bartosz.golaszewski@oss.qualcomm.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Tested-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://patch.msgid.link/20260515124008.2947838-2-claudiu.beznea@kernel.org
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
[claudiu.beznea: fixed conflict by dropping the code not present in
v6.6 stable]
Signed-off-by: Claudiu Beznea <claudiu.beznea.uj@bp.renesas.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
commit c1f3e770ee upstream.
clang recently added support for -Wstringop-overread [1], which is on by
default like -Wfortify-source. This breaks the usage of -Werror in the
fortify tests, resulting in the following false positive warnings in the
kernel build:
warning: unsafe memcmp() usage lacked '__read_overflow2' warning in lib/test_fortify/read_overflow2-memcmp.c
warning: unsafe memcmp() usage lacked '__read_overflow' warning in lib/test_fortify/read_overflow-memcmp.c
warning: unsafe memchr() usage lacked '__read_overflow' warning in lib/test_fortify/read_overflow-memchr.c
Examining the fortify test logs shows a warning like the following in
each of the failed logs:
In file included from lib/test_fortify/read_overflow2-memcmp.c:5:
lib/test_fortify/test_fortify.h:34:2: error: 'memcmp' reading 17 bytes from a region of size 16 [-Werror,-Wstringop-overread]
34 | TEST;
| ^
lib/test_fortify/read_overflow2-memcmp.c:3:2: note: expanded from macro 'TEST'
3 | memcmp(large, small, sizeof(small) + 1)
| ^
1 error generated.
Disable -Wstringop-overread for the fortify tests, as it defeats the
purpose of testing the Linux specific implementation of fortify, like
-Wfortify-source.
Cc: stable@vger.kernel.org
Closes: https://github.com/ClangBuiltLinux/linux/issues/2168
Link: https://github.com/llvm/llvm-project/commit/86f2e71cb8d165b59ad31a442b2391e23826133e [1]
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
Link: https://patch.msgid.link/20260623-fix-test_fortify-for-clang-stringop-overread-v1-1-15ee8342a953@kernel.org
Signed-off-by: Kees Cook <kees@kernel.org>
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
commit 4e9903b086 upstream.
There are some issues in the test_fortify Makefile code.
Problem 1: cc-disable-warning invokes compiler dozens of times
To see how many times the cc-disable-warning is evaluated, change
this code:
$(call cc-disable-warning,fortify-source)
to:
$(call cc-disable-warning,$(shell touch /tmp/fortify-$$$$)fortify-source)
Then, build the kernel with CONFIG_FORTIFY_SOURCE=y. You will see a
large number of '/tmp/fortify-<PID>' files created:
$ ls -1 /tmp/fortify-* | wc
80 80 1600
This means the compiler was invoked 80 times just for checking the
-Wno-fortify-source flag support.
$(call cc-disable-warning,fortify-source) should be added to a simple
variable instead of a recursive variable.
Problem 2: do not recompile string.o when the test code is updated
The test cases are independent of the kernel. However, when the test
code is updated, $(obj)/string.o is rebuilt and vmlinux is relinked
due to this dependency:
$(obj)/string.o: $(obj)/$(TEST_FORTIFY_LOG)
always-y is suitable for building the log files.
Problem 3: redundant code
clean-files += $(addsuffix .o, $(TEST_FORTIFY_LOGS))
... is unneeded because the top Makefile globally cleans *.o files.
This commit fixes these issues and makes the code readable.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Link: https://lore.kernel.org/r/20240727150302.1823750-2-masahiroy@kernel.org
Signed-off-by: Kees Cook <kees@kernel.org>
[nathan: Fixed conflicts]
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
commit 6d4514ca9c upstream.
A robust futex unlock stores 0 over the whole futex value - wiping
FUTEX_WAITERS - and wakes a single waiter. That wakeup is a one-shot
notification: the protocol relies on its recipient to either acquire the
futex (and eventually unlock while aware of the remaining contention) or
re-arm FUTEX_WAITERS before sleeping again. If the woken waiter is killed
before it can do either, the kernel must jump in and wake the next task
down the line.
This is a known complication of the futex protocol with a previous
partial fix in commit ca16d5bee5 ("futex: Prevent robust futex exit
race"). Unfortunately, that fix is insufficient.
If a third task re-acquired the futex through the uncontended fast
path in the meantime, the notification is lost: robust exit processing
sees that it is owned by another task and does nothing, while the new
owner sees no FUTEX_WAITERS when it unlocks and wakes nobody.
The remaining waiters sleep forever behind a free futex:
A owns the futex, B and C sleep in FUTEX_WAIT
uval == A | FUTEX_WAITERS
A robust unlock: store 0, FUTEX_WAKE(1) wakes B
uval == 0
D fast path acquire: cmpxchg(0 -> D)
uval == D, no FUTEX_WAITERS
B killed before acting on the wakeup
B exit walk, pending op: owner D != B -> no action
D unlock: no FUTEX_WAITERS -> no wake
C sleeps forever
This is clearly a shortcoming in the implementation, which fails to keep
the FUTEX_WAITERS bit consistent.
Work around this by augmenting the robust list exit processing to also
perform the extra wakeup if the futex word is owned by another thread but
FUTEX_WAITERS is not set.
This does not fix the problem of a non-contended take over/release and free
sequence, which has been discussed for years and has been addressed by
commit 3ca9595d9f ("futex: Add support for unlocking robust futexes") and
subsequent changes, but failed to take the problem described above into
account.
A more complete solution which is based on the in kernel unlock of
contended robust futexes has been discussed in the context of this change
and should show up in mainline sooner than later.
[ tglx: Amend change log slightly and fixup coding style ]
Fixes: ca16d5bee5 ("futex: Prevent robust futex exit race")
Signed-off-by: Keno Fischer <keno@juliahub.com>
Signed-off-by: Thomas Gleixner <tglx@kernel.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Thomas Gleixner <tglx@kernel.org>
Assisted-by: ClaudeCode:claude-fable-5 tla+
Cc: stable@vger.kernel.org
Link: https://patch.msgid.link/20260730194705.38981-1-keno@juliacomputing.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit e27264daac ]
The DT bindings for inline-crypto engine do not specify the UFS_PHY_GDSC
power-domain and iface clock. Without enabling the iface clock and the
associated power-domain the ICE hardware cannot function correctly and
leads to unclocked hardware accesses being observed during probe.
Extend and fix the DT bindings for inline-crypto engine by allowing
description of the iface clock and UFS_PHY_GDSC power-domain.
This patch has been adapted from the mentioned upstream commit to drop
references to Eliza and Milos Qualcomm platforms which do not exist
on the stable tree. Thus, patch now fixes the original commit which
introduced the DT binding for Qualcomm inline-crypto engine.
Fixes: f6ff91a47a ("dt-bindings: crypto: Add Qualcomm Inline Crypto Engine")
Reviewed-by: Kuldeep Singh <kuldeep.singh@oss.qualcomm.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>
Signed-off-by: Harshal Dev <harshal.dev@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20260416-qcom_ice_power_and_clk_vote-v5-1-5ccf5d7e2846@oss.qualcomm.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 0cfe660559 ]
The current implementation of aisb calculation will erroneously index
via an unsigned long * as well as multiply by 8B for every 64-bits in
the offset; only one or the other is required. This throws off aisb
calculations once the number of devices exceeds 64, and can result
in out-of-bounds access as well as failure to indicate summary bits
associated with those devices in guests.
Fix this by converting to a physical address before applying the
offset, as is already done in arch/s390/pci/pci_irq.c.
Fixes: 3c5a1b6f0a ("KVM: s390: pci: provide routines for enabling/disabling interrupt forwarding")
Signed-off-by: Matthew Rosato <mjrosato@linux.ibm.com>
Reviewed-by: Niklas Schnelle <schnelle@linux.ibm.com>
Signed-off-by: Christian Borntraeger <borntraeger@linux.ibm.com>
[alifm@linux.ibm.com: Resolved merge conflict]
Signed-off-by: Farhan Ali <alifm@linux.ibm.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 5580c9858f ]
Currently if kvm_zpci_set_airq() fails, kvm_s390_pci_aif_enable() returns
the error code but doesn't do any resource cleanup thus leaking resources.
Fix this by cleaning up all the resources such as the GAITE, AIBV, AISB and
unpinning any pinned pages. While at it, remove dead code that stored FIB
values that were never referenced.
As part of the cleanup, we are also holding the aift_lock a bit longer, as
we hold the lock while executing the MPCIFC instruction. Though this is not
strictly necessary, it means we don't have to drop and re-acquire in the
error case.
Fixes: 3c5a1b6f0a ("KVM: s390: pci: provide routines for enabling/disabling interrupt forwarding")
Cc: stable@vger.kernel.org
Reviewed-by: Matthew Rosato <mjrosato@linux.ibm.com>
Reviewed-by: Christian Borntraeger <borntraeger@linux.ibm.com>
Signed-off-by: Farhan Ali <alifm@linux.ibm.com>
Tested-by: Matthew Rosato <mjrosato@linux.ibm.com>
Signed-off-by: Christian Borntraeger <borntraeger@linux.ibm.com>
[alifm@linux.ibm.com: Resolved merge conflict]
Signed-off-by: Farhan Ali <alifm@linux.ibm.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit f86842e4d6 ]
In kvm_s390_pci_aif_enable() two error paths failed to set an error code,
causing the function to return 0 on failure. It also failed to rollback
memory accounting on failure. Fix both by propagating an error code on
failure and calling unaccount_mem() in the cleanup path.
Fixes: 3c5a1b6f0a ("KVM: s390: pci: provide routines for enabling/disabling interrupt forwarding")
Cc: stable@vger.kernel.org
Reviewed-by: Christian Borntraeger <borntraeger@linux.ibm.com>
Reviewed-by: Matthew Rosato <mjrosato@linux.ibm.com>
Signed-off-by: Farhan Ali <alifm@linux.ibm.com>
Tested-by: Matthew Rosato <mjrosato@linux.ibm.com>
Signed-off-by: Christian Borntraeger <borntraeger@linux.ibm.com>
[alifm@linux.ibm.com: Resolve merge conflict]
Signed-off-by: Farhan Ali <alifm@linux.ibm.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 36f6999ecd ]
The account_mem() and unaccount_mem() functions call get_uid() which
increments the reference count of struct user_struct on every invocation.
But we don't decrement the count by calling free_uid(). It also
accounted/unaccounted the pages against the current->mm. But its possible
the unaccount_mem() can be called from a different process context than the
one that originally pinned the pages.
Let's fix this by storing the pinning process user_struct and mm_struct
when accounting for pinned pages, and subsequently free these resources
when the pages are unpinned.
Fixes: 3c5a1b6f0a ("KVM: s390: pci: provide routines for enabling/disabling interrupt forwarding")
Cc: stable@vger.kernel.org
Reviewed-by: Christian Borntraeger <borntraeger@linux.ibm.com>
Reviewed-by: Matthew Rosato <mjrosato@linux.ibm.com>
Signed-off-by: Farhan Ali <alifm@linux.ibm.com>
Tested-by: Matthew Rosato <mjrosato@linux.ibm.com>
[borntraeger@linux.ibm.com: Fixed whitespace]
Signed-off-by: Christian Borntraeger <borntraeger@linux.ibm.com>
[alifm@linux.ibm.com: Resolve merge conflict]
Signed-off-by: Farhan Ali <alifm@linux.ibm.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
commit 63488dba65 upstream.
br_mrp_alloc_test_skb() builds MRP test frames on an skb from
dev_alloc_skb(), which does not clear the linear data area. On the MRA
ring-role branch the sub-option TLV header is appended with
sub_tlv = skb_put(skb, sizeof(*sub_tlv));
sub_tlv->type = BR_MRP_SUB_TLV_HEADER_TEST_AUTO_MGR;
so sub_tlv->length is never written, and the two trailing alignment bytes
are appended with a bare skb_put() that does not clear them either. The
neighbouring oui and sub_opt regions are explicitly zeroed, so three
uninitialised bytes are left in every MRA MRP_Test frame that goes out.
Put the sub-option TLV header and the alignment padding in a single
skb_put_zero(), which clears both. The AUTO_MGR sub-TLV carries no
payload, so the zeroed length field is already the value it should have.
Fixes: f7458934b0 ("net: bridge: mrp: Update the Test frames for MRA")
Suggested-by: Nikolay Aleksandrov <razor@blackwall.org>
Cc: stable@vger.kernel.org
Signed-off-by: Baul Lee <baul.lee@xbow.com>
Acked-by: Nikolay Aleksandrov <razor@blackwall.org>
Link: https://patch.msgid.link/20260729131941.10254-1-baul.lee@xbow.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 3082597033 upstream.
nf_log_unregister() runs after the per-net teardown so its final RCU
grace period also drains readers that obtained the logger from a per-net
binding. However, ebt_nflog passes an explicit ULOG log type to
nf_log_packet() without holding a reference on the selected logger module,
unlike the xt_NFLOG and nft_log frontends.
An ebtables nflog rule can therefore remain callable while nfnetlink_log
is unloaded. The resulting interleaving is:
CPU 0 CPU 1
nfnetlink_log_fini()
unregister_pernet_subsys()
kfree(nfnl_log_pernet(net))
ebt_nflog_tg()
nf_log_packet()
nfulnl_log_packet()
instance_lookup_get_rcu()
The global ULOG logger is still registered at this point, so CPU 1
dereferences the per-net state after CPU 0 has freed it. KASAN reported:
BUG: KASAN: slab-use-after-free in instance_lookup_get_rcu
Read of size 8 at addr ff110001052e6210 by task poc/92
Call Trace:
instance_lookup_get_rcu+0x1ce/0x1f0 [nfnetlink_log]
nfulnl_log_packet+0x248/0x2fb0 [nfnetlink_log]
nf_log_packet+0x204/0x300
ebt_nflog_tg+0x351/0x550
ebt_do_table+0xedf/0x22b0
Allocated by task 90:
__kmalloc_noprof+0x186/0x470
ops_init+0x6d/0x420
register_pernet_operations+0x2f6/0x670
register_pernet_subsys+0x23/0x40
Freed by task 93:
kfree+0x131/0x3c0
ops_undo_list+0x3e3/0x700
unregister_pernet_operations+0x232/0x490
unregister_pernet_subsys+0x1c/0x30
nfnetlink_log_fini+0x34/0x450 [nfnetlink_log]
Acquire the ULOG logger module reference when an ebt_nflog rule is
validated and release it when the rule is destroyed. Request the NFLOG
backend for legacy callers when needed, matching xt_NFLOG. This prevents
module teardown until all ebt_nflog rules have stopped using the logger.
Fixes: c83fa19603 ("netfilter: nf_log: don't call synchronize_rcu in nf_log_unset")
Cc: stable@vger.kernel.org
Signed-off-by: Chengfeng Ye <nicoyip.dev@gmail.com>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 5f26a690e8 upstream.
mac802154_beacon_worker() reads local->beacon_req under RCU and derives
the sub-interface from the request, but then drops the RCU read lock and
continues to use both sdata and the embedded wpan_dev.
mac802154_stop_beacons_locked() cancels only pending beacon work, clears
local->beacon_req and frees the request. A beacon worker that is already
running can therefore continue after interface teardown and dereference
the freed netdev private area.
The scan worker already pins the netdev before leaving RCU. Apply the
same lifetime rule to the beacon worker: take a netdev reference while
the request is still protected by RCU, and release it on all paths that
continue after the reference is acquired.
Fixes: 3accf47627 ("mac802154: Handle basic beaconing")
Cc: stable@vger.kernel.org
Reported-by: Vega <vega@nebusec.ai>
Signed-off-by: Zihan Xi <zihanx@nebusec.ai>
Reviewed-by: Miquel Raynal <miquel.raynal@bootlin.com>
Link: https://patch.msgid.link/e9a3909c7a6281967961773ca841e860b8ecf40e.1785596603.git.zihanx@nebusec.ai
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 3b9a324e64 upstream.
dev_validate_header() reads dev->hard_header_len directly when
zero-padding short link layer headers for CAP_SYS_RAWIO holders:
if (capable(CAP_SYS_RAWIO)) {
memset(ll_header + len, 0, dev->hard_header_len - len);
return true;
}
Packet send paths call dev_validate_header() on skbs whose headroom was
allocated from an earlier hard_header_len read. If the device is
reconfigured so that dev->hard_header_len increases before validation,
the memset writes past the reserved buffer, an out-of-bounds write.
This out-of-bounds write is masked in some SOCK_RAW paths today because
the same concurrent increase can first make skb_push() exceed the
reserved headroom and trigger skb_under_panic(). Remove the zero-padding
branch before making those hard_header_len reads consistent, so the
snapshot fixes do not turn a loud panic into a silent overwrite.
This path is only reached for variable length L2 protocols, where
len < hard_header_len but len >= min_header_len. No remaining in-tree
variable length L2 protocol implements header_ops->validate, and the
CAP_SYS_RAWIO bypass that zero-pads and accepts short headers has no
real value beyond allowing testing of intentionally malformed input.
Drop the CAP_SYS_RAWIO branch. The remaining reads of
dev->hard_header_len in dev_validate_header() are comparisons only and
have no memory safety impact.
Suggested-by: Willem de Bruijn <willemb@google.com>
Fixes: 2793a23aac ("net: validate variable length ll headers")
Cc: stable@vger.kernel.org
Signed-off-by: Qihang Tang <q.h.hack.winter@gmail.com>
Reviewed-by: Willem de Bruijn <willemb@google.com>
Link: https://patch.msgid.link/20260805125729.19220-2-q.h.hack.winter@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 7e2d693af0 upstream.
In function otx2_get_egress_burst_cfg, when the parameter `burst` is
255 and the max mantissa is 255 (0xFFULL), `burst_exp` is set to
`ilog2(255) - 1`, which equals 6.
This results in an unsigned wrap-around when calculating
`(1ULL << (*burst_exp - 7))`, since `*burst_exp - 7` becomes -1,
which makes the shift operand 0xFFFFFFFF. This value is greater than
the width of the left operand.
According to standard 6.5.7 p.3:
"The type of the result is that of the promoted left operand.
If the value of the right operand is negative or is greater than
or equal to the width of the promoted left operand, the behavior
is undefined."
Fix the off-by-one boundary condition.
Add a WARN_ON(*burst_exp < 7) before the else branch as an
explicit safeguard. This ensures that if max_mantissa ever changes
in a way that reintroduces this condition, it will be immediately
caught at runtime rather than silently triggering UB.
Found by Linux Verification Center (linuxtesting.org) with SVACE.
Fixes: e638a83f16 ("octeontx2-pf: TC_MATCHALL egress ratelimiting offload")
Signed-off-by: Sergey V. Frolov <Sergey.V.Frolov@kaspersky.com>
Cc: stable@vger.kernel.org
Reviewed-by: Ratheesh Kannoth <rkannoth@marvell.com>
Reviewed-by: Sunil Goutham <sgoutham@marvell.com>
Link: https://patch.msgid.link/20260804120446.1955448-1-Sergey.V.Frolov@kaspersky.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 5d1c224dd9 upstream.
ovs_flow_cmd_new() preallocates the optional reply skb before it takes
ovs_mutex and before it knows which existing flow will be updated.
That is normally fine because the skb is sized from the request flow
identifier. That identifier also becomes the inserted flow's identifier.
For updates, however, a request with a UFID may miss the UFID lookup and
then fall back to the flow key lookup. That lookup can legitimately find
an existing key-identified flow. UFIDs are optional and the flow key is
the primary identifier.
For echoed replies, ovs_flow_cmd_fill_info() writes the matched flow's
identifier, not the request identifier used for the preallocation. A short
request UFID can therefore leave too little room for the key identifier.
The fill can then fail with -EMSGSIZE and hit the BUG_ON(error < 0) in the
update path.
Once the update target has been resolved, reallocate the reply skb if the
matched flow needs a larger reply than the request identifier allowed. Do
this before replacing the actions so the request can still fail cleanly if
the rare extra allocation fails.
Fixes: 74ed7ab926 ("openvswitch: Add support for unique flow IDs.")
Cc: stable@vger.kernel.org
Reported-by: Vega <vega@nebusec.ai>
Signed-off-by: Zhiling Zou <zhilinz@nebusec.ai>
Reviewed-by: Ilya Maximets <i.maximets@ovn.org>
Link: https://patch.msgid.link/f7bbd3c30ce81a39156e226b3872d73abed21d2f.1785644623.git.zhilinz@nebusec.ai
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 1a35da325c upstream.
packet_set_ring() updates the RX ring state under sk_receive_queue.lock,
but used to publish the tpacket receive mode through po->prot_hook.func
after releasing that lock. packet_poll() and packet_recvmsg() can then
run the pressure clearing path after the ring has been cleared while
still seeing tpacket_rcv, causing __packet_rcv_has_room() to dereference
stale or NULL ring storage.
Move the existing receive hook assignment into the same
sk_receive_queue.lock section as the ring state update. Keep the
assignment otherwise unchanged, including on TX ring reconfiguration, to
avoid adding behavior changes that are not required for the fix.
Serialize packet_recvmsg() pressure clearing with the same queue lock
only after PACKET_SOCK_PRESSURE has been observed. If the flag is clear
and the socket has moved away from tpacket_rcv, packet_set_ring() has
already detached the socket and waited for synchronize_net(), so no new
packet input can set the flag again.
packet_poll() already holds sk_receive_queue.lock, so it uses the new
unlocked helper directly.
Fixes: 2ccdbaa6d5 ("packet: rollover lock contention avoidance")
Cc: stable@vger.kernel.org
Reported-by: Vega <vega@nebusec.ai>
Assisted-by: Codex:gpt-5.4
Signed-off-by: Zihan Xi <zihanx@nebusec.ai>
Link: https://patch.msgid.link/f90b5688311fa278d1361ea8c6be0bf25967d591.1785247446.git.zihanx@nebusec.ai
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit c2707480cf upstream.
packet_parse_headers() resets the MAC header only for a SOCK_RAW frame
whose socket did not bind a protocol. A protocol-bound SOCK_RAW socket,
any SOCK_DGRAM frame, and the legacy SOCK_PACKET path therefore leave
skb->mac_header unset here.
For frames sent via __dev_queue_xmit() this is harmless: it resets the
MAC header unconditionally. But the packet-socket PACKET_QDISC_BYPASS
path uses dev_direct_xmit(), which does not, so the frame reaches
ndo_start_xmit() with the MAC header unset. A driver that reads
eth_hdr(skb) on transmit then dereferences skb->head + (u16)~0, an
out-of-bounds access ~64 KiB past the head -- the same class fixed for
one consumer in commit f5089008f9 ("macsec: do not read an unset MAC
header in macsec_encrypt()").
packet_parse_headers() runs only on the transmit path, where skb->data
points at the start of the L2 header for every packet-socket type
regardless of its length: SOCK_RAW and SOCK_PACKET carry a user-supplied
header and SOCK_DGRAM has one built by dev_hard_header(). Reset the MAC
header unconditionally, mirroring __dev_queue_xmit(), so the frame is
anchored on the bypass path too.
Found by 0sec (https://0sec.ai) using automated source analysis;
verified against source and matched to the macsec KASAN report in
f5089008f9. Compile-tested.
Fixes: 75c65772c3 ("net/packet: Ask driver for protocol if not provided by user")
Cc: stable@vger.kernel.org
Signed-off-by: Doruk Tan Ozturk <doruk@0sec.ai>
Reviewed-by: Willem de Bruijn <willemb@google.com>
Link: https://patch.msgid.link/20260724144015.63219-1-doruk@0sec.ai
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 21b5953e74 upstream.
tpacket_snd() reads dev->hard_header_len independently for skb
allocation and header construction in tpacket_fill_skb(). Concurrent
netdevice reconfiguration can therefore make the reserved headroom
smaller than the amount later pushed, or make copylen - hard_header_len
negative.
Snapshot hard_header_len once before processing ring frames and use it
for the frame limit, headroom allocation, copy length, and skb
construction. Pass the snapshot to tpacket_fill_skb().
The separate SOCK_DGRAM consistency problem between hard_header_len and
header_ops->create is not addressed here.
Fixes: 69e3c75f4d ("net: TX_RING and packet mmap")
Cc: stable@vger.kernel.org
Signed-off-by: Qihang Tang <q.h.hack.winter@gmail.com>
Reviewed-by: Willem de Bruijn <willemb@google.com>
Link: https://patch.msgid.link/20260805125729.19220-4-q.h.hack.winter@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 03390aa32e upstream.
packet_snd() reads dev->hard_header_len multiple times while allocating
and constructing an skb. Device reconfiguration can change this value
concurrently, for example through bonding device type changes.
For SOCK_RAW, packet_snd() can save a larger value in reserve and later
allocate headroom using a smaller value. Moving skb->data back by reserve
then places it before skb->head, and the following copy from userspace can
attempt an out-of-bounds write.
packet_sendmsg_spkt() has the same issue because it calculates its
reservation and header offset from separate reads before dropping the RCU
read lock to allocate the skb.
Add LL_RESERVED_SPACE_EX() for callers that already saved a header length.
Read hard_header_len once in packet_snd() and use it for allocation and
construction. In packet_sendmsg_spkt(), preserve the allocation-time value
through the device lookup retry.
The separate SOCK_DGRAM consistency problem between hard_header_len and
header_ops->create is not addressed here.
Fixes: b84bbaf7a6 ("packet: in packet_snd start writing at link layer allocation")
Cc: stable@vger.kernel.org
Signed-off-by: Qihang Tang <q.h.hack.winter@gmail.com>
Reviewed-by: Willem de Bruijn <willemb@google.com>
Link: https://patch.msgid.link/20260805125729.19220-3-q.h.hack.winter@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit e0ba936287 upstream.
ip_vs_in_icmp() rebases an skb from the outer ICMP packet to the
quoted original request before passing it to icmp_send(). However,
IPCB(skb)->opt still describes the outer IPv4 header.
A timestamp option in the outer header can therefore leave an offset
that points into the quoted transport header after the rebase.
__ip_options_echo() treats a byte at that stale location as the option
length and copies it into the fixed-size option storage on the
__icmp_send() stack, causing a stack out-of-bounds write.
Clear the stale option metadata after resetting the network header.
Keep the remaining control block fields, including the ingress
interface used by the ICMP response path.
Fixes: f2edb9f770 ("ipvs: implement passive PMTUD for IPIP packets")
Cc: stable@vger.kernel.org
Assisted-by: Codex:gpt-5.6-sol Codex:gpt-5.5-cyber
Signed-off-by: Kyle Zeng <kylebot@openai.com>
Co-developed-by: David Lee <david.lee@trailofbits.com>
Signed-off-by: David Lee <david.lee@trailofbits.com>
Acked-by: Julian Anastasov <ja@ssi.bg>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 8f843441c4 upstream.
The upper/lower connection thresholds for dest can be changed,
so use ip_vs_dest_update_overload() to properly update the
dest overload flag.
The thresholds were not limited, fit them in the 0 .. INT_MAX
range as already done in ipvsadm.
As the thresholds are also read when connections are created
and expired, use WRITE_ONCE/READ_ONCE to access them.
As the lower threshold is optional, use (u - (u >> 2)) to
calculate the 75% default value based on the upper threshold
by preserving the integer rounding, as suggested by Yizhou Zhao.
Trigger flag update when totalconns reaches one of the
thresholds and use dst_lock to serialize the updating.
Fixes: 1da177e4c3 ("Linux-2.6.12-rc2")
Cc: stable@vger.kernel.org
Signed-off-by: Julian Anastasov <ja@ssi.bg>
Signed-off-by: Yizhou Zhao <zhaoyz24@mails.tsinghua.edu.cn>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 04d2feaed8 upstream.
Replace the inactconns dest counter with totalconns, now
inactconns can be obtained from totalconns - activeconns.
This reduces the atomic inc/dec ops for TCP/SCTP from
6 to 4 if the connection is established and then closed.
Fixes: 1da177e4c3 ("Linux-2.6.12-rc2")
Cc: stable@vger.kernel.org
Signed-off-by: Julian Anastasov <ja@ssi.bg>
Signed-off-by: Yizhou Zhao <zhaoyz24@mails.tsinghua.edu.cn>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 558f67f134 upstream.
IPVS estimator kthread 0 starts with zeroed chain and tick limits until
its initial calculation phase completes. If network namespace teardown
clears ipvs->enable during that phase, ip_vs_est_calc_phase() can return
without installing positive limits.
The kthread can then continue into its main loop and drain
est_temp_list with zero chain_max, tick_max and est_max_count values.
Each enqueue consumes one available tick row, but est_count never
reaches the zero est_max_count value. After all rows are consumed, the
row lookup returns IPVS_EST_NTICKS and ip_vs_enqueue_estimator() writes
past the ticks and tick_len arrays.
Exit kthread 0 after the calculation phase if the kthread is stopping or
IPVS has been disabled. That keeps temporary estimators from being
drained after the limits failed to initialize.
Estimator kthreads can now self-exit before teardown or reload stops
kd->task. Keep an extra task reference after creation and release it
with kthread_stop_put(), so kd->task remains valid until the stop paths
consume that reference.
Fixes: 705dd34440 ("ipvs: use kthreads for stats estimation")
Cc: stable@vger.kernel.org
Reported-by: Vega <vega@nebusec.ai>
Signed-off-by: Zhiling Zou <zhilinz@nebusec.ai>
Acked-by: Julian Anastasov <ja@ssi.bg>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 5ff232d311 upstream.
The digest-length check in xattr_verify() mixes int and size_t:
if (xattr_len - sizeof(xattr_value->type) - hash_start >=
iint->ima_hash->length)
sizeof() yields size_t, so the usual arithmetic conversions promote
the whole left-hand side to unsigned 64-bit before the subtraction
runs. For a truncated xattr this underflows instead of going negative:
a 1-byte IMA_XATTR_DIGEST_NG xattr (xattr_len == 1, hash_start == 1)
turns "1 - 1 - 1" into SIZE_MAX, which is trivially >= ima_hash->length.
The check then passes and the following memcmp() reads
iint->ima_hash->length bytes starting past the end of the buffer
vfs_getxattr_alloc() allocated for it.
Nothing upstream clamps xattr_len back into a safe range first:
ima_get_hash_algo() only special-cases xattr_len < 2 to pick a default
algorithm, and evm_verifyxattr() returns INTEGRITY_UNKNOWN rather than
failing when no HMAC key is loaded, so a truncated security.ima value
reaches the length check as-is.
Rewrite the comparison so every operand stays a signed int and no
implicit conversion to size_t can occur.
Fixes: 3ea7a56067 ("ima: provide hash algo info in the xattr")
Cc: stable@vger.kernel.org
Signed-off-by: Lincoln Wallace <locnnil0@gmail.com>
Signed-off-by: Mimi Zohar <zohar@linux.ibm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 90f305f2c7 upstream.
In evdev_pass_values(), the input_event structure is allocated on the
kernel stack and populated field-by-field. However, it is never fully
initialized. On architectures where struct input_event contains explicit
or implicit padding (such as the 32-bit __pad field on SPARC64), these
padding bytes are left uninitialized.
When this event structure is subsequently passed to the client buffer
and later copied to userspace, the uninitialized padding bytes leak
kernel stack memory, potentially exposing sensitive information.
Similar issues exist in __evdev_queue_syn_dropped and __pass_event.
Fix this by explicitly zeroing the entire event structure with memset()
before populating its fields. This ensures all padding bytes are cleared
before the data crosses the security boundary.
Reported-by: sashiko-bot@kernel.org
Cc: stable@vger.kernel.org
Link: https://patch.msgid.link/ampGGKo4UMKru6f5@google.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Zihan Xi
Zhiling Zou
Kyle Zeng
Daming Li
Rik van Riel
Michael Wu
Baul Lee
Takashi Iwai
Hui Su
Eddie Lin
Junrui Luo
Ekansh Gupta
Anandu Krishnan E
Mariano Baragiola
Panagiotis Petrakopoulos
Muhammad Bilal
Cunhao Lu
Alexander Usyskin
Chengfeng Ye
Michal Luczaj
Eric Biggers
Claudiu Beznea
Nathan Chancellor
Masahiro Yamada
Keno Fischer
Harshal Dev
Matthew Rosato
Farhan Ali
Qihang Tang
Sergey V. Frolov
Zijie Huang
Doruk Tan Ozturk
Julian Anastasov
Lincoln Wallace
Dmitry Torokhov
Joshua Rogers