Track whether the guest is using 52bit PAs, either LPA or LPA2.
This further simplifies the handling of LVA for 4k and 16k pages,
as LPA2 implies LVA in this case.
Reviewed-by: Oliver Upton <oliver.upton@linux.dev>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Commit d5094bcb5b ("tools/nolibc: define time_t in terms of
__kernel_old_time_t") made nolibc use the kernel's time type so that
`time_t` matches `timespec::tv_sec` on all ABIs (notably x32).
But since __kernel_old_time_t is fairly new, notably from 2020 in commit
94c467ddb2 ("y2038: add __kernel_old_timespec and __kernel_old_time_t"),
nolibc builds that rely on host headers may fail.
Switch to __kernel_time_t, which is the same as __kernel_old_time_t and
has existed for longer.
Tested in PPC VM of Open Source Lab of Oregon State University
(./tools/testing/selftests/rcutorture/bin/mkinitrd.sh)
Fixes: d5094bcb5b ("tools/nolibc: define time_t in terms of __kernel_old_time_t")
Signed-off-by: Zhouyi Zhou <zhouzhouyi@gmail.com>
[Thomas: Reformat commit and its message a bit]
Signed-off-by: Thomas Weißschuh <linux@weissschuh.net>
After LoongArch was converted to use the generic TIF bits in commit
f9629891d4 ("loongarch: Use generic TIF bits"), its TIF_FIXADE flag
takes the same bit with TIF_RESTORE_SIGMASK in thread_info.flags.
Such conflict causes TIF_FIXADE being considered cleared when
TIF_RESTORE_SIGMASK is cleared during deliver of a signal. And since
TIF_FIXADE determines whether unaligned access emulation works for a
task, userspace making use of unaligned access will receive unexpected
SIGBUS (and likely terminate) after receiving its first signal.
This conflict looks like a simple typo, switch it to the free bit 19.
Fixes: f9629891d4 ("loongarch: Use generic TIF bits")
Signed-off-by: Yao Zi <ziyao@disroot.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Wentao Guan <guanwentao@uniontech.com>
ASoC: Updates for v6.18
A relatively quiet release for ASoC, we've had a lot of maintainance
work going on and several new drivers but really the most remarkable
thing is that we removed a driver, the WL1273 driver used in some old
Nokia systems that have had the underlying system support removed from
the kernel.
- Morimoto-san continues his work on cleanups of the core APIs and
enforcement of abstraction layers.
- Lots of cleanups and conversions of DT bindings.
- Substantial maintainance work on the Intel AVS drivers.
- Support for Qualcomm Glymur and PM4125, Realtek RT1321, Shanghai
FourSemi FS2104/5S, Texas Instruments PCM1754.
- Remove support for TI WL1273.
Defining i2s_bclk and i2s_sysclk as fixed-rate clocks is insufficient
for real I2S use cases.
Moreover, the current I2S clock configuration does not work as expected
due to missing parent clocks.
This patch adds the missing parent clocks, defines i2s_sysclk as
a DDN clock, and i2s_bclk as a DIV clock.
A special note for i2s_bclk:
From the register definition, the i2s_bclk divider always implies
an additional 1/2 factor.
The following table shows the correspondence between index
and frequency division coefficients:
| index | div |
|-------|-------|
| 0 | 2 |
| 1 | 4 |
| 2 | 6 |
| 3 | 8 |
From a software perspective, introducing i2s_bclk_factor as the
parent of i2s_bclk is sufficient to address the issue.
The I2S-related clock registers can be found here [1].
Link:
https://developer.spacemit.com/documentation?token=LCrKwWDasiJuROkVNusc2pWTnEb
[1]
Fixes: 1b72c59db0 ("clk: spacemit: Add clock support for SpacemiT K1 SoC")
Co-developer: Jinmei Wei <weijinmei@linux.spacemit.com>
Suggested-by: Haylen Chu <heylenay@4d2.org>
Signed-off-by: Jinmei Wei <weijinmei@linux.spacemit.com>
Signed-off-by: Troy Mitchell <troy.mitchell@linux.spacemit.com>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
The original DDN operations applied an implicit divide-by-2, which should
not be a default behavior.
This patch removes that assumption, letting each clock define its
actual behavior explicitly.
Reviewed-by: Haylen Chu <heylenay@4d2.org>
Signed-off-by: Troy Mitchell <troy.mitchell@linux.spacemit.com>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Previously, the K1 clock driver did not include the parent clocks of
the I2S sysclk.
Introduce pre-clock to fix I2S clock.
Otherwise, the I2S clock may not work as expected.
This patch adds their definitions to allow proper registration
in the driver and usage in the device tree.
Fixes: 1b72c59db0 ("clk: spacemit: Add clock support for SpacemiT K1 SoC")
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Troy Mitchell <troy.mitchell@linux.spacemit.com>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
For some of the SCMI based platforms, the oem extended config may be
supported, but not for duty cycle purpose. Skip the duty cycle ops if
err return when trying to get duty cycle info.
Signed-off-by: Jacky Bai <ping.bai@nxp.com>
Reviewed-by: Sudeep Holla <sudeep.holla@arm.com>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
The mt8183-mfgcfg node uses a power domain in its device tree node.
To prevent schema validation warnings, add the optional `power-domains`
property to the binding schema for mediatek syscon clocks.
Fixes: 1781f2c461 ("arm64: dts: mediatek: mt8183: Add power-domains properity to mfgcfg")
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Signed-off-by: Julien Massot <julien.massot@collabora.com>
Acked-by: Rob Herring (Arm) <robh@kernel.org>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
As described in AM335x Errata Advisory 1.0.42, WKUP_DEBUGSS_CLKCTRL
can't be disabled - the clock module will just be stuck in transitioning
state forever, resulting in the following warning message after the wait
loop times out:
l3-aon-clkctrl:0000:0: failed to disable
Just add the clock to enable_init_clks, so no attempt is made to disable
it.
Signed-off-by: Matthias Schiffer <matthias.schiffer@tq-group.com>
Signed-off-by: Alexander Stein <alexander.stein@ew.tq-group.com>
Acked-by: Kevin Hilman <khilman@baylibre.com>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Pull Allwinner clk driver updates from Chen-Yu Tsai:
In this cycle support for power-of-two single divider clocks was added.
This covers some of the clocks found in the A523 MCU PRCM clock and
reset controller, for which support was added as well.
Besides the new controller, a missing clock was added for the A523's
main clock controller. The RTC clock driver gained specifics for the
A523's RTC block for tweaking the clock rate of the internal oscillator
to get it closer to what the RTC needs.
* tag 'sunxi-clk-for-6.18' of https://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux:
clk: sunxi-ng: add support for the A523/T527 MCU CCU
clk: sunxi-ng: div: support power-of-two dividers
clk: sunxi-ng: sun55i-a523-ccu: Add missing NPU module clock
dt-bindings: clock: sun55i-a523-ccu: Add A523 MCU CCU clock controller
dt-bindings: clock: sun55i-a523-ccu: Add missing NPU module clock
clk: sunxi-ng: sun6i-rtc: Add A523 specifics
Pull an Allwinner clk driver fix from Chen-Yu Tsai:
- One fix for the clock rate readback on the recently added dual
divider clocks
* tag 'sunxi-clk-fixes-for-6.17' of https://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux:
clk: sunxi-ng: mp: Fix dual-divider clock rate readback
In kernel v6.5, several functions were added to the cdev layer. This
required updating the default version of subsystem ABI up to 6, but
this requirement was overlooked.
This commit updates the version accordingly.
Fixes: 6add87e976 ("firewire: cdev: add new version of ABI to notify time stamp at request/response subaction of transaction#")
Link: https://lore.kernel.org/r/20250920025148.163402-1-o-takashi@sakamocchi.jp
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
SM6350 doesn't have MST support, as such in DT schema it has been
switched to use SC7180 as a fallback compatible. Make DT file implement
this change. DisplayPort on SC7180 has been supported long ago (and long
before we added support for DP on SM8350). The driver will continue to
work with the old DTS (having qcom,sm8350-dp fallback compatible) as
even after adding MST support the driver will have to support old SM8350
DTS which didn't have MST clocks.
Fixes: 62f87a3cac ("arm64: dts: qcom: sm6350: Add DisplayPort controller")
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20250916-dp_mst_bindings-v9-1-68c674b39d8e@oss.qualcomm.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Breno Leitao says:
====================
net: netpoll: remove dead code and speed up rtnl-locked region
This patchset introduces two minor modernizations to the netpoll
infrastructure:
The first patch removes the unused netpoll pointer from the netpoll_info
structure. This member is redundant and its presence does not benefit
multi-instance setups, as reported by Jay Vosburgh. Eliminating it cleans up
the structure and removes unnecessary code.
The second patch updates the netpoll resource cleanup routine to use
synchronize_net() instead of synchronize_rcu(). As __netpoll_free() is always
called under the RTNL lock, using synchronize_net() leverages the more
efficient synchronize_rcu_expedited() in these contexts, reducing time spent in
critical sections and improving performance.
Both changes simplify maintenance and enhance efficiency without altering
netpoll behavior.
====================
Link: https://patch.msgid.link/20250918-netpoll_jv-v1-0-67d50eeb2c26@debian.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Replace synchronize_rcu() with synchronize_net() in __netpoll_free().
synchronize_net() is RTNL-aware and will use the more efficient
synchronize_rcu_expedited() when called under RTNL lock, avoiding
the potentially expensive synchronize_rcu() in RTNL critical sections.
Since __netpoll_free() is called with RTNL held (as indicated by
ASSERT_RTNL()), this change improves performance by reducing the
time spent in the RTNL critical section.
Signed-off-by: Breno Leitao <leitao@debian.org>
Link: https://patch.msgid.link/20250918-netpoll_jv-v1-2-67d50eeb2c26@debian.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Antoine Tenart says:
====================
net: ipv4: some drop reason cleanup and improvements
A few patches that were laying around cleaning up and improving drop
reasons in net/ipv4.
====================
Link: https://patch.msgid.link/20250915091958.15382-1-atenart@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Instead of setting the drop reason to SKB_DROP_REASON_NOT_SPECIFIED
early and having to reset it each time it is overridden by a function
returned value, just set the drop reason to the expected value before
returning from ip_rcv_finish_core.
Signed-off-by: Antoine Tenart <atenart@kernel.org>
Link: https://patch.msgid.link/20250915091958.15382-3-atenart@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Various network interface types make use of needed_{head,tail}room values
to efficiently reserve buffer space for additional encapsulation headers,
such as VXLAN, Geneve, IPSec, etc. However, it is not currently possible
to query these values in a generic way.
Introduce ability to query the needed_{head,tail}room values of a network
device via rtnetlink, such that applications that may wish to use these
values can do so.
For example, Cilium agent iterates over present devices based on user config
(direct routing, vxlan, geneve, wireguard etc.) and in future will configure
netkit in order to expose the needed_{head,tail}room into K8s pods. See
b9ed315d3c ("netkit: Allow for configuring needed_{head,tail}room").
Suggested-by: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: Alasdair McWilliam <alasdair@mcwilliam.dev>
Reviewed-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://patch.msgid.link/20250917095543.14039-1-alasdair@mcwilliam.dev
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Russell King says:
====================
net: stmmac: remove mac_interface
The dwmac core supports a range of interfaces, but when it comes to
SerDes interfaces, the core itself does not include the SerDes block.
Consequently, it has to provide an interface suitable to interface such
a block to, and uses TBI for this.
The driver also uses "PCS" for RGMII, even though the dwmac PCS block
is not present for this interface type - it was a convenice for the
code structure as RGMII includes inband signalling of the PHY state,
much like Cisco SGMII does at a high level.
As such, the code refers to RGMII and SGMII modes for the PCS, and
there used to be STMMAC_PCS_TBI and STMMAC_PCS_RTBI constants as well
but these were never set, although they were used in the code.
The selection of the PCS mode was from mac_interface. Thus, it seems
that the original intention was for mac_interface to describe the
interface mode used within the dwmac core, and phy_interface to
describe the external world-accessible interface (e.g. which would
connect to a PHY or SFP cage.)
It appears that many glue drivers misinterpret these. A good exmple
is socfpga. This supports SGMII and 1000BASE-X, but does not include
the dwmac PCS, relying on the Lynx PCS instead. However, it makes use
of mac_interface to configure the dwmac core to its GMII/MII mode.
So, when operating in either of these modes, the dwmac is configured
for GMII mode to communicate with the Lynx PCS which then provides
the SGMII or 1000BASE-X interface mode to the external world.
Given that phy_interface is the external world interface, and
mac_interface is the dwmac core interface, selecting the interface
mode based on mac_interface being 1000BASEX makes no sense.
Moreover, mac_interface is initialised by the stmmac core code. If
the "mac-mode" property is set in DT, this will be used. Otherwise,
it will reflect the "phy-mode" property - meaning that it defaults
to phy_interface. As no in-kernel DT makes reference to a "mac-mode"
property, we can assume that for all in-kernel platforms, these two
interface variables are the same. The exception are those platform
glues which I reviwed and suggested they use phy_interface, setting
mac_interface to PHY_INTERFACE_MODE_NA.
The conclusion to all of this is that mac_interface serves no useful
purpose, and causes confusion as the platform glue code doesn't seem
to know which one should be used.
Thus, let's get rid of mac_interface, which makes all this code more
understandable. It also helps to untangle some of the questions such
as:
- should this be using the interface passed from phylink
- should we set the range of phylink supported interfaces to be
more than one
- when we get phylink PCS support for the dwmac PCS, should we be
selecting it based on mac_interface or phy_interface, and how
should we populate the PCS' supported_interface bitmap.
Having converted socfpga to use phy_interface, this turns out to
feel like "the right way" to do this - convert the external world
"phy_interface" to whatever phy_intf_sel value that the dwmac core
needs to achieve the connection to whatever hardware blocks are
integrated inside the SoC to achieve the requested external world
interface.
As an illustration why - consider that in the case of socfpga, it
_could_ have been implemented such that the dwmac PCS was used for
SGMII, and the Lynx PCS for 1000BASE-X, or vice versa. Only the
platform glue would know which it is.
I will also note that several cores provide their currently configured
interface mode via the ACTPHYIF field of Hardware Feature 0, and thus
can be read back in the platform-independent parts of the driver to
decide whether the internal PCS or the RGMII (or actually SMII) "PCS"
should be used.
This is hot-off-the-press, and has only been build tested. As I have
none of these platforms, this series has not been run-tested, so
please test on your hardware.
====================
Link: https://patch.msgid.link/aMrPpc8oRxqGtVPJ@shell.armlinux.org.uk
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
mac_interface has served little purpose, and has only caused confusion.
Now that we have cleaned up all platform glue drivers which should not
have been using mac_interface, there are no users remaining. Remove
mac_interface.
This results in the special dwmac specific "mac-mode" DT property
becoming redundant, and an in case, no DTS files in the kernel make use
of this property. Add a warning if the property is set, and it is
different from the "phy-mode".
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Acked-by: Vladimir Zapolskiy <vz@mleia.com>
Link: https://patch.msgid.link/E1uytpv-00000006H2x-196h@rmk-PC.armlinux.org.uk
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
dwmac-thead supports either MII or RGMII interface modes only.
None of the DTS files set "mac-mode", so mac_interface will be
identical to phy_interface.
Convert dwmac-thead to use phy_interface when determining the
interface mode rather than mac_interface.
Also convert the error prints to use phy_modes() so that we get a
meaningful string rather than a number for the interface mode.
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Link: https://patch.msgid.link/E1uytpq-00000006H2q-0ajY@rmk-PC.armlinux.org.uk
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
dwmac-sun8i supports MII, RMII and RGMII interface modes only. It
is unclear whether the dwmac core interface is different from the
one presented to the outside world.
However, as none of the DTS files set "mac-mode", mac_interface will
be identical to phy_interface.
Convert dwmac-sun8i to use phy_interface when determining the
interface mode rather than mac_interface.
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Acked-by: Chen-Yu Tsai <wens@csie.org>
Link: https://patch.msgid.link/E1uytpl-00000006H2k-08pH@rmk-PC.armlinux.org.uk
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
dwmac-stm32 supports MII, RMII, GMII and RGMII interface modes,
selecting the dwmac core interface mode via bits 23:21 of the
SYSCFG register. The bit combinations are identical to the
dwmac phy_intf_sel_i signals.
None of the DTS files set "mac-mode", so mac_interface will be
identical to phy_interface.
Convert dwmac-stm32 to use phy_interface when determining the
interface mode rather than mac_interface.
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Link: https://patch.msgid.link/E1uytpf-00000006H2c-3hiU@rmk-PC.armlinux.org.uk
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
dwmac-starfive uses RMII or RGMII interface modes without any PCS,
and selects the dwmac core accordingly using a register field with
the same bit encoding as the core's phy_intf_sel_i signals.
None of the DTS files set "mac-mode", so mac_interface will be
identical to phy_interface.
Convert dwmac-starfive to use phy_interface when determining the
interface mode rather than mac_interface. Also convert the error
prints to use phy_modes() so that we get a meaningful string rather
than a number for the interface mode.
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Link: https://patch.msgid.link/E1uytpa-00000006H2X-3GWx@rmk-PC.armlinux.org.uk
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
dwmac-socfpga uses MII, RMII, GMII, RGMII, SGMII and 1000BASE-X
interface modes, and supports the Lynx PCS. The Lynx PCS will only be
used for SGMII and 1000BASE-X modes, with the MAC programmed to use
GMII or MII mode to talk to the PCS. This suggests that the Synopsys
optional dwmac PCS is not present.
None of the DTS files set "mac-mode", so mac_interface will be
identical to phy_interface.
Convert dwmac-socfpga to use phy_interface when determining the
interface mode rather than mac_interface.
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Link: https://patch.msgid.link/E1uytpV-00000006H2R-2nA6@rmk-PC.armlinux.org.uk
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
dwmac-ingenic uses only MII, RMII, GMII or RGMII interface modes, none
of which require any kind of conversion between the MAC and external
world. Thus, mac_interface and phy_interface will be the same.
Convert dwmac-ingenic to use phy_interface when determining the
interface mode that the dwmac core should be configured to at reset,
rather than mac_interface.
Also convert the error prints to use phy_modes() and terminate with a
newline so that we get a human readable string rather than a number for
the interface mode.
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Link: https://patch.msgid.link/E1uytpQ-00000006H2L-2Jzb@rmk-PC.armlinux.org.uk
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Checking the IMX8MP documentation, there is no requirement for a
separate mac_interface mode definition. As mac_interface and
phy_interface will be the same, use phy_interface internally rather
than mac_interface.
Also convert the error prints to use phy_modes() so that we get a
meaningful string rather than a number for the interface mode.
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Link: https://patch.msgid.link/E1uytpL-00000006H2F-1o6b@rmk-PC.armlinux.org.uk
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
In the majority, if not all cases, mac_interface and phy_interface
are the same with the exception of some drivers that I have suggested
only use phy_interface and set mac_interface to PHY_INTERFACE_MODE_NA.
The only two that currently set mac_interface to PHY_INTERFACE_MODE_NA
are dwmac-loongson and dwmac-lpc18xx, neither of which use RGMII nor
SGMII.
In order to phase out the use of mac_interface, we need to have a path
for existing drivers so they can update to only using phy_interface
without causing regressions.
Therefore, in order to keep the "pcs" code working, we need to choose
the STMMAC integrated PCS mode based on phy_interface if mac_interface
is PHY_INTERFACE_MODE_NA.
This will allow more drivers to set mac_interface to
PHY_INTERFACE_MODE_NA without risking regressions.
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Link: https://patch.msgid.link/E1uytpG-00000006H29-1Ltk@rmk-PC.armlinux.org.uk
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Based on new research, it has come to light that the comment that I
added in a014c35556 ("net: stmmac: clarify difference between
"interface" and "phy_interface"") is not fully correct.
Update the comment to properly describe the difference between the two.
All of the DTS files in the kernel tree do not mention the "mac-mode"
property, which results in mac_interface and phy_interface being the
same. Also, none of the platform glue drivers set mac_interface to
anything but PHY_INTERFACE_MODE_NA. This means that for all the
platforms known to mainline, mac_interface is either the same as
phy_interface, or it is PHY_INTERFACE_MODE_NA.
Thus, updating the definition for mac_interface in stmmac.h has no
material effect on current uses known to mainline, but the change opens
the door to cleaning up all uses.
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Link: https://patch.msgid.link/E1uytpB-00000006H23-0pRi@rmk-PC.armlinux.org.uk
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
psp_dev_rcv() decapsulates psp headers from a received frame. This
will make any csum complete computed by the device inaccurate. Rather
than attempt to patch up skb->csum in psp_dev_rcv() just make it clear
to callers what they can expect regarding checksum complete.
Signed-off-by: Daniel Zahka <daniel.zahka@gmail.com>
Link: https://patch.msgid.link/20250918212723.17495-1-daniel.zahka@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Daniel Zahka says:
====================
address miscellaneous issues with psp_sk_get_assoc_rcu()
There were a few minor issues with psp_sk_get_assoc_rcu() identified
by Eric in his review of the initial psp series. This series addresses
them.
====================
Link: https://patch.msgid.link/20250918155205.2197603-1-daniel.zahka@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Originally ptp_ocp driver was not strictly checking flags for external
timestamper and was always activating rising edge timestamping as it's
the only supported mode. Recent changes to ptp made it incompatible with
PTP_EXTTS_REQUEST2 ioctl. Adjust ptp_clock_info to provide supported
mode and be compatible with new infra.
While at here remove explicit check of periodic output flags from the
driver and provide supported flags for ptp core to check.
Signed-off-by: Vadim Fedorenko <vadim.fedorenko@linux.dev>
Link: https://patch.msgid.link/20250918131146.651468-1-vadim.fedorenko@linux.dev
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Marc Zyngier
Zhouyi Zhou
Yao Zi
Takashi Iwai
Troy Mitchell
Jacky Bai
Julien Massot
Raag Jadav
Matthias Schiffer
Marek Szyprowski
Stephen Boyd
Takashi Sakamoto
Jessica Zhang
Dmitry Baryshkov
Akhil P Oommen
Jie Zhang
Jakub Kicinski
Breno Leitao
Antoine Tenart
Alasdair McWilliam
Russell King (Oracle)
Vlad Dumitrescu
Daniel Zahka
Kuniyuki Iwashima
Petr Malat
Eric Dumazet
Vadim Fedorenko