Conventions for readsl() are the same as for readl() - any __iomem
pointer is acceptable, both const and volatile ones being OK. Same
for readsb() and readsw().
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Reviewed-by: Andreas Larsson <andreas@gaisler.com>
Signed-off-by: Andreas Larsson <andreas@gaisler.com> # Making sparc64 subject prefix
Pull gpio fixes from Bartosz Golaszewski:
- fix an ACPI I2C HID driver breakage due to not initializing a
structure on the stack and passing garbage down to GPIO core
- ignore touchpad wakeup on GPD G1619-05
- fix debouncing configuration when looking up GPIOs in ACPI
* tag 'gpio-fixes-for-v6.17-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux:
gpiolib: acpi: initialize acpi_gpio_info struct
gpiolib: acpi: Ignore touchpad wakeup on GPD G1619-05
gpiolib: acpi: Program debounce when finding GPIO
Commit 16f5dfbc85 ("gfp: include __GFP_NOWARN in GFP_NOWAIT") made
GFP_NOWAIT implicitly include __GFP_NOWARN.
Therefore, explicit __GFP_NOWARN combined with GFP_NOWAIT (e.g.,
`GFP_NOWAIT | __GFP_NOWARN`) is now redundant. Let's clean up these
redundant flags across subsystems.
No functional changes.
Signed-off-by: Qianfeng Rong <rongqianfeng@vivo.com>
Reviewed-by: Andreas Larsson <andreas@gaisler.com>
Signed-off-by: Andreas Larsson <andreas@gaisler.com>
An attempt to exercise sparc hugetlb code in a sun4u-based guest
running under qemu results in the guest hanging due to being stuck
in a trap loop. This is due to invalid hugetlb TTEs being installed
that do not have the expected _PAGE_PMD_HUGE and page size bits set.
Although the breakage has gone apparently unnoticed for several years,
fix it now so there is the option to exercise sparc hugetlb code under
qemu. This can be useful because sun4v support in qemu does not support
linux guests currently and sun4v-based hardware resources may not be
readily available.
Fix tested with a 6.15.2 and 6.16-rc6 kernels by running libhugetlbfs
tests on a qemu guest running Debian 13.
Fixes: c7d9f77d33 ("sparc64: Multi-page size support")
Cc: stable@vger.kernel.org
Signed-off-by: Anthony Yznaga <anthony.yznaga@oracle.com>
Tested-by: John Paul Adrian Glaubitz <glaubitz@physik.fu-berlin.de>
Reviewed-by: John Paul Adrian Glaubitz <glaubitz@physik.fu-berlin.de>
Reviewed-by: Andreas Larsson <andreas@gaisler.com>
Link: https://lore.kernel.org/r/20250716012446.10357-1-anthony.yznaga@oracle.com
Signed-off-by: Andreas Larsson <andreas@gaisler.com>
This is needed so that the kernel can handle R_SPARC_UA64 relocations,
which is emitted by LLVM's IAS.
Signed-off-by: Koakuma <koachan@protonmail.com>
Reviewed-by: Andreas Larsson <andreas@gaisler.com>
Signed-off-by: Andreas Larsson <andreas@gaisler.com>
When checking for a potential UMIP violation on #GP, verify the decoder found
at least two opcode bytes to avoid false positives when the kernel encounters
an unknown instruction that starts with 0f. Because the array of opcode.bytes
is zero-initialized by insn_init(), peeking at bytes[1] will misinterpret
garbage as a potential SLDT or STR instruction, and can incorrectly trigger
emulation.
E.g. if a VPALIGNR instruction
62 83 c5 05 0f 08 ff vpalignr xmm17{k5},xmm23,XMMWORD PTR [r8],0xff
hits a #GP, the kernel emulates it as STR and squashes the #GP (and corrupts
the userspace code stream).
Arguably the check should look for exactly two bytes, but no three byte
opcodes use '0f 00 xx' or '0f 01 xx' as an escape, i.e. it should be
impossible to get a false positive if the first two opcode bytes match '0f 00'
or '0f 01'. Go with a more conservative check with respect to the existing
code to minimize the chances of breaking userspace, e.g. due to decoder
weirdness.
Analyzed by Nick Bray <ncbray@google.com>.
Fixes: 1e5db22369 ("x86/umip: Add emulation code for UMIP instructions")
Reported-by: Dan Snyder <dansnyder@google.com>
Signed-off-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: stable@vger.kernel.org
Stefan Mätje <stefan.maetje@esd.eu> says:
The first patch makes some error messages also print the error
code to achieve a higher significance. Removes also a duplicate
message and makes the register / unregister messages symmetric.
The second patch avoids emitting any error messages during the
disconnect of CAN-USB devices or the driver unload.
Changes in v2:
- Second patch:
- Convert all occurrences of error status prints to use
"ERR_PTR(err)" instead of printing the decimal value
of "err".
- Rename retval to err in esd_usb_read_bulk_callback() to
make the naming of error status variables consistent
with all other functions.
Link: https://patch.msgid.link/20250821143422.3567029-1-stefan.maetje@esd.eu
[mkl: only take paches 4+5, which are new features, adjust cover letter accordingly]
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
The kernel linear mapping is painted in very early stage of system boot.
The cpufeature has not been finalized yet at this point. So the linear
mapping is determined by the capability of boot CPU only. If the boot
CPU supports BBML2, large block mappings will be used for linear
mapping.
But the secondary CPUs may not support BBML2, so repaint the linear
mapping if large block mapping is used and the secondary CPUs don't
support BBML2 once cpufeature is finalized on all CPUs.
If the boot CPU doesn't support BBML2 or the secondary CPUs have the
same BBML2 capability with the boot CPU, repainting the linear mapping
is not needed.
Repainting is implemented by the boot CPU, which we know supports BBML2,
so it is safe for the live mapping size to change for this CPU. The
linear map region is walked using the pagewalk API and any discovered
large leaf mappings are split to pte mappings using the existing helper
functions. Since the repainting is performed inside of a stop_machine(),
we must use GFP_ATOMIC to allocate the extra intermediate pgtables. But
since we are still early in boot, it is expected that there is plenty of
memory available so we will never need to sleep for reclaim, and so
GFP_ATOMIC is acceptable here.
The secondary CPUs are all put into a waiting area with the idmap in
TTBR0 and reserved map in TTBR1 while this is performed since they
cannot be allowed to observe any size changes on the live mappings. Some
of this infrastructure is reused from the kpti case. Specifically we
share the same flag (was __idmap_kpti_flag, now idmap_kpti_bbml2_flag)
since it means we don't have to reserve any extra pgtable memory to
idmap the extra flag.
Co-developed-by: Yang Shi <yang@os.amperecomputing.com>
Signed-off-by: Yang Shi <yang@os.amperecomputing.com>
Signed-off-by: Ryan Roberts <ryan.roberts@arm.com>
Reviewed-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Will Deacon <will@kernel.org>
The USB stack calls during disconnect the esd_usb_disconnect() callback.
esd_usb_disconnect() calls netdev_unregister() for each network which
in turn calls the net_device_ops::ndo_stop callback esd_usb_close() if
the net device is up.
The esd_usb_close() callback tries to disable all CAN Ids and to reset
the CAN controller of the device sending appropriate control messages.
Sending these messages in .disconnect() is moot and always fails because
either the device is gone or the USB communication is already torn down
by the USB stack in the course of a rmmod operation.
Move the code that sends these control messages to a new function
esd_usb_stop() which is approximately the counterpart of
esd_usb_start() to make code structure less convoluted.
Then change esd_usb_close() not to send the control messages at all if
the ndo_stop() callback is executed from the USB .disconnect()
callback. Add a new flag in_usb_disconnect to the struct esd_usb
device structure to mark this condition which is checked by
esd_usb_close() whether to skip the send operations in esd_usb_start().
Signed-off-by: Stefan Mätje <stefan.maetje@esd.eu>
Link: https://patch.msgid.link/20250821143422.3567029-6-stefan.maetje@esd.eu
[mkl: minor change patch description to imperative language]
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
- esd_usb_open(): Get rid of duplicate "couldn't start device: %d\n"
message already printed from esd_usb_start().
- Fix duplicate printout of network device name when network device
is registered. Add an unregister message for the network device
as counterpart to the register message.
- Add the printout of error codes together with the error messages
in esd_usb_close() and some in esd_usb_probe(). The additional error
codes should lead to a better understanding what is really going
wrong.
- Convert all occurrences of error status prints to use "ERR_PTR(err)"
instead of printing the decimal value of "err".
- Rename retval to err in esd_usb_read_bulk_callback() to make the
naming of error status variables consistent with all other functions.
Signed-off-by: Stefan Mätje <stefan.maetje@esd.eu>
Link: https://patch.msgid.link/20250821143422.3567029-5-stefan.maetje@esd.eu
[mkl: minor change patch description to imperative language]
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Pull MMC host fixes from Ulf Hansson:
- mvsdio: Fix dma_unmap_sg() nents value
- sdhci: Fix clock management for UHS-II
- sdhci-pci-gli: Fix initialization of UHS-II for GL9767
* tag 'mmc-v6.17-rc2-2' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc:
mmc: sdhci-pci-gli: GL9767: Fix initializing the UHS-II interface during a power-on
mmc: sdhci-uhs2: Fix calling incorrect sdhci_set_clock() function
mmc: sdhci: Move the code related to setting the clock from sdhci_set_ios_common() into sdhci_set_ios()
mmc: mvsdio: Fix dma_unmap_sg() nents value
Add the newly introduced Arm C1-Nano/Pro/Premium/Ultra core and PMU
compatible strings. These cores are part of the Lumex CSS. The new names
are replacing the long lived Cortex-A/X branding going forward.
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
Currently, users of Mediatek UFOe (Unified Frame Optimization engine) DT
bindings set mediatek,gce-client-reg node property, which is missing from
the DT schema.
For example, device tree arch/arm64/boot/dts/mediatek/mt8173.dtsi is
causing the following dtb check error:
arch/arm64/boot/dts/mediatek/mt8173-elm.dtb: ufoe@1401a000 (mediatek,mt8173-disp-ufoe): 'mediatek,gce-client-reg' does not match any of the regexes: '^pinctrl-[0-9]+$'
This commit adds the missing node property in the DT schema and updates the
example as well.
Signed-off-by: Ariel D'Alessandro <ariel.dalessandro@collabora.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20250911151001.108744-7-ariel.dalessandro@collabora.com
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
Currently, users of Mediatek OD (display overdrive) DT bindings set
mediatek,gce-client-reg node property, which is missing from the DT schema.
For example, device tree arch/arm64/boot/dts/mediatek/mt8173.dtsi is
causing the following dtb check error:
arch/arm64/boot/dts/mediatek/mt8173-elm.dtb: od@14023000 (mediatek,mt8173-disp-od): 'mediatek,gce-client-reg' does not match any of the regexes: '^pinctrl-[0-9]+$'
This commit adds the missing node property in the DT schema and updates the
example as well.
Signed-off-by: Ariel D'Alessandro <ariel.dalessandro@collabora.com>
Link: https://lore.kernel.org/r/20250911151001.108744-6-ariel.dalessandro@collabora.com
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
Convert the rockchip,rk3368-mailbox binding to DT schema format. Add
the missing 'clocks' and 'clock-names' properties. Document that it's
one interrupt per mailbox channel (and there are 4 channels).
Link: https://lore.kernel.org/r/20250812181348.62137-1-robh@kernel.org
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
Pull LoongArch fixes from Huacai Chen:
"Fix some build warnings for RUST-enabled objtool check, align ACPI
structures for ARCH_STRICT_ALIGN, fix an unreliable stack for live
patching, add some NULL pointer checkings, and fix some bugs around
KVM"
* tag 'loongarch-fixes-6.17-2' of git://git.kernel.org/pub/scm/linux/kernel/git/chenhuacai/linux-loongson:
LoongArch: KVM: Avoid copy_*_user() with lock hold in kvm_pch_pic_regs_access()
LoongArch: KVM: Avoid copy_*_user() with lock hold in kvm_eiointc_sw_status_access()
LoongArch: KVM: Avoid copy_*_user() with lock hold in kvm_eiointc_regs_access()
LoongArch: KVM: Avoid copy_*_user() with lock hold in kvm_eiointc_ctrl_access()
LoongArch: KVM: Fix VM migration failure with PTW enabled
LoongArch: KVM: Remove unused returns and semicolons
LoongArch: vDSO: Check kcalloc() result in init_vdso()
LoongArch: Fix unreliable stack for live patching
LoongArch: Replace sprintf() with sysfs_emit()
LoongArch: Check the return value when creating kobj
LoongArch: Align ACPI structures if ARCH_STRICT_ALIGN enabled
LoongArch: Update help info of ARCH_STRICT_ALIGN
LoongArch: Handle jump tables options for RUST
LoongArch: Make LTO case independent in Makefile
objtool/LoongArch: Mark special atomic instruction as INSN_BUG type
objtool/LoongArch: Mark types based on break immediate code
When UBLK_F_BUF_REG_OFF_DAEMON was added, we missed updating kublk's
feat_map, which results in the feature being reported as "unknown." Add
UBLK_F_BUF_REG_OFF_DAEMON to feat_map to fix this.
Signed-off-by: Uday Shankar <ushankar@purestorage.com>
Reviewed-by: Ming Lei <ming.lei@redhat.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Simplify the definition of feat_map by introducing a helper macro
FEAT_NAME to avoid having to type the feature name twice. As a side
effect, this changes the names in the feature list to be the full macro
name instead of the abbreviated names that were used before, but this is
a good change for clarity.
Using the full feature macro names ruins the alignment of the output, so
change the output format to put each feature's hex value before its
name, as this is easier to align nicely. The output now looks as
follows:
root# ./kublk features
ublk_drv features: 0x7fff
0x1 : UBLK_F_SUPPORT_ZERO_COPY
0x2 : UBLK_F_URING_CMD_COMP_IN_TASK
0x4 : UBLK_F_NEED_GET_DATA
0x8 : UBLK_F_USER_RECOVERY
0x10 : UBLK_F_USER_RECOVERY_REISSUE
0x20 : UBLK_F_UNPRIVILEGED_DEV
0x40 : UBLK_F_CMD_IOCTL_ENCODE
0x80 : UBLK_F_USER_COPY
0x100 : UBLK_F_ZONED
0x200 : UBLK_F_USER_RECOVERY_FAIL_IO
0x400 : UBLK_F_UPDATE_SIZE
0x800 : UBLK_F_AUTO_BUF_REG
0x1000 : UBLK_F_QUIESCE
0x2000 : UBLK_F_PER_IO_DAEMON
0x4000 : unknown
Signed-off-by: Uday Shankar <ushankar@purestorage.com>
Reviewed-by: Ming Lei <ming.lei@redhat.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Vincent Mailhol
Al Viro
Linus Torvalds
Qianfeng Rong
Anthony Yznaga
Svyatoslav Ryhel
Koakuma
Chen Wang
Sean Christopherson
Marc Kleine-Budde
Ryan Roberts
Stefan Mätje
Rob Herring (Arm)
Ariel D'Alessandro
Geert Uytterhoeven
Stéphane Grosjean
Uday Shankar