Pull objtool fix from Ingo Molnar:
"Fix objtool warning when faced with raw STAC/CLAC instructions"
* tag 'objtool-urgent-2025-11-01' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
objtool: Fix skip_alt_group() for non-alternative STAC/CLAC
Pull xfs fixes from Carlos Maiolino:
"Just a single bug fix (and documentation for the issue)"
* tag 'xfs-fixes-6.18-rc4' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux:
xfs: document another racy GC case in xfs_zoned_map_extent
xfs: prevent gc from picking the same zone twice
Pull Kbuild fixes from Nathan Chancellor:
- Formally adopt Kconfig in MAINTAINERS
- Fix install-extmod-build for more O= paths
- Align end of .modinfo to fix Authenticode calculation in EDK2
- Restore dynamic check for '-fsanitize=kernel-memory' in
CONFIG_HAVE_KMSAN_COMPILER to ensure backend target has support
for it
- Initialize locale in menuconfig and nconfig to fix UTF-8 terminals
that may not support VT100 ACS by default like PuTTY
* tag 'kbuild-fixes-6.18-2' of git://git.kernel.org/pub/scm/linux/kernel/git/kbuild/linux:
kconfig/nconf: Initialize the default locale at startup
kconfig/mconf: Initialize the default locale at startup
KMSAN: Restore dynamic check for '-fsanitize=kernel-memory'
kbuild: align modinfo section for Secureboot Authenticode EDK2 compat
kbuild: install-extmod-build: Fix when given dir outside the build dir
MAINTAINERS: Update Kconfig section
To pick the changes from:
e19c062199 ("x86/cpufeatures: Add support for Assignable Bandwidth Monitoring Counters (ABMC)")
7b59c73fd6 ("x86/cpufeatures: Add SNP Secure TSC")
3c7cb84145 ("x86/cpufeatures: Add a CPU feature bit for MSR immediate form instructions")
2f8f173413 ("x86/vmscape: Add conditional IBPB mitigation")
a508cec6e5 ("x86/vmscape: Enumerate VMSCAPE bug")
This causes these perf files to be rebuilt and brings some X86_FEATURE
that may be used by:
CC /tmp/build/perf/bench/mem-memcpy-x86-64-asm.o
CC /tmp/build/perf/bench/mem-memset-x86-64-asm.o
And addresses this perf build warning:
Warning: Kernel ABI header differences:
diff -u tools/arch/x86/include/asm/cpufeatures.h arch/x86/include/asm/cpufeatures.h
Please see tools/include/uapi/README for further details.
Cc: Babu Moger <babu.moger@amd.com>
Cc: Borislav Petkov (AMD) <bp@alien8.de>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Nikunj A Dadhania <nikunj@amd.com>
Cc: Pawan Gupta <pawan.kumar.gupta@linux.intel.com>
Cc: Sean Christopherson <seanjc@google.com>
Cc: Xin Li <xin@zytor.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
To pick the changes in this cset:
56101b69c9 ("uprobes/x86: Add uprobe syscall to speed up uprobe")
That add support for this new 'uprobe' syscall in tools such as 'perf trace'.
Now it is possible to do a system wide 'perf trace' to look if this new
syscall is being used:
root@number:~# perf trace -v -e uprobe
<SNIP>
event qualifier tracepoint filter: (common_pid != 33989) && (id == 336)
^C
root@number#
$ grep -w uprobe tools/perf/arch/x86/entry/syscalls/syscall_64.tbl
336 common uprobe sys_uprobe
$
This addresses these perf build warnings:
Warning: Kernel ABI header differences:
diff -u tools/perf/arch/x86/entry/syscalls/syscall_64.tbl arch/x86/entry/syscalls/syscall_64.tbl
Please see tools/include/uapi/README for further details.
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
To pick up the changes in this cset:
e83f0b5d10 ("nsfs: support exhaustive file handles")
That doesn't introduce anything of interest for tools/, just addresses
these perf build warnings:
Warning: Kernel ABI header differences:
diff -u tools/perf/trace/beauty/include/uapi/linux/fcntl.h include/uapi/linux/fcntl.h
Please see tools/include/uapi/README for further details.
Cc: Christian Brauner <brauner@kernel.org>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
To pick up the changes in these csets:
8cdc4d2701 ("mm/huge_memory: respect MADV_COLLAPSE with PR_THP_DISABLE_EXCEPT_ADVISED")
9dc21bbd62 ("prctl: extend PR_SET_THP_DISABLE to optionally exclude VM_HUGEPAGE")
That don't introduce anything of interest for the tools/, just
addressing these perf build warnings:
Warning: Kernel ABI header differences:
diff -u tools/perf/trace/beauty/include/uapi/linux/prctl.h include/uapi/linux/prctl.h
Please see tools/include/uapi/README for further details.
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: David Hildenbrand <david@redhat.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
To pick up changes from:
db2ab24a34 ("Add RWF_NOSIGNAL flag for pwritev2")
These are used to beautify fs syscall arguments, albeit the changes in
this update are not affecting those beautifiers.
This addresses these tools/ build warnings:
Warning: Kernel ABI header differences:
diff -u tools/perf/trace/beauty/include/uapi/linux/fs.h include/uapi/linux/fs.h
Please see tools/include/uapi/README for details (it's in the first patch
of this series).
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Christian Brauner <brauner@kernel.org>
Cc: Ian Rogers <irogers@google.com>
Cc: James Clark <james.clark@linaro.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Lauri Vasama <git@vasama.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Fix bug where make nconfig doesn't initialize the default locale, which
causes ncurses menu borders to be displayed incorrectly (lqqqqk) in
UTF-8 terminals that don't support VT100 ACS by default, such as PuTTY.
Signed-off-by: Jakub Horký <jakub.git@horky.net>
Link: https://patch.msgid.link/20251014144405.3975275-2-jakub.git@horky.net
[nathan: Alphabetize locale.h include]
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
Fix bug where make menuconfig doesn't initialize the default locale, which
causes ncurses menu borders to be displayed incorrectly (lqqqqk) in
UTF-8 terminals that don't support VT100 ACS by default, such as PuTTY.
Signed-off-by: Jakub Horký <jakub.git@horky.net>
Link: https://patch.msgid.link/20251014154933.3990990-1-jakub.git@horky.net
[nathan: Alphabetize locale.h include]
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
Pull bpf fixes from Alexei Starovoitov:
- Mark migrate_disable/enable() as always_inline to avoid issues with
partial inlining (Yonghong Song)
- Fix powerpc stack register definition in libbpf bpf_tracing.h (Andrii
Nakryiko)
- Reject negative head_room in __bpf_skb_change_head (Daniel Borkmann)
- Conditionally include dynptr copy kfuncs (Malin Jonsson)
- Sync pending IRQ work before freeing BPF ring buffer (Noorain Eqbal)
- Do not audit capability check in x86 do_jit() (Ondrej Mosnacek)
- Fix arm64 JIT of BPF_ST insn when it writes into arena memory
(Puranjay Mohan)
* tag 'bpf-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf:
bpf/arm64: Fix BPF_ST into arena memory
bpf: Make migrate_disable always inline to avoid partial inlining
bpf: Reject negative head_room in __bpf_skb_change_head
bpf: Conditionally include dynptr copy kfuncs
libbpf: Fix powerpc's stack register definition in bpf_tracing.h
bpf: Do not audit capability check in do_jit()
bpf: Sync pending IRQ work before freeing ring buffer
ARCnet docs states that inquiries on the subsystem should be emailed to
Avery Pennarun <apenwarr@worldvisions.ca>, for whom has been in CREDITS
since the beginning of kernel git history and her email address is
unreachable (bounce). The subsystem is now maintained by Michael
Grzeschik since c38f6ac74c ("MAINTAINERS: add arcnet and take
maintainership").
In addition, there used to be a dedicated ARCnet mailing list but its
archive at epistolary.org has been shut down. ARCnet discussion nowadays
take place in netdev list. The arcnet.com domain mentioned has become
AIoT (Artificial Intelligence of Things) related Typeform page and
ARCnet info now resides on arcnet.cc (ARCnet Resource Center) instead.
Update contact information.
Signed-off-by: Bagas Sanjaya <bagasdotme@gmail.com>
Reviewed-by: Randy Dunlap <rdunlap@infradead.org>
Tested-by: Randy Dunlap <rdunlap@infradead.org>
Link: https://patch.msgid.link/20251028014451.10521-2-bagasdotme@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Ivan Vecera says:
====================
dpll: Add support for phase adjustment granularity
Phase-adjust values are currently limited only by a min-max range. Some
hardware requires, for certain pin types, that values be multiples of
a specific granularity, as in the zl3073x driver.
Patch 1: Adds 'phase-adjust-gran' pin attribute and an appropriate
handling
Patch 2: Adds a support for this attribute into zl3073x driver
====================
Link: https://patch.msgid.link/20251029153207.178448-1-ivecera@redhat.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Add the TPS23881B I2C power sourcing equipment controller to the list of
supported devices.
Falling back to the TPS23881 predecessor device is not suitable as firmware
loading needs to handled differently by the driver. The TPS23881 and
TPS23881B devices require different firmware. Trying to load the TPS23881
firmware on a TPS23881B device fails and must therefore be omitted.
Signed-off-by: Thomas Wismer <thomas.wismer@scs.ch>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Reviewed-by: Kory Maincent <kory.maincent@bootlin.com>
Link: https://patch.msgid.link/20251029212312.108749-3-thomas@wismer.xyz
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The TPS23881B uses different firmware than the TPS23881. Trying to load the
TPS23881 firmware on a TPS23881B device fails and must be omitted.
The TPS23881B ships with a more recent ROM firmware. Moreover, no updated
firmware has been released yet and so the firmware loading step must be
skipped. As of today, the TPS23881B is intended to use its ROM firmware.
Signed-off-by: Thomas Wismer <thomas.wismer@scs.ch>
Reviewed-by: Kory Maincent <kory.maincent@bootlin.com>
Acked-by: Oleksij Rempel <o.rempel@pengutronix.de>
Link: https://patch.msgid.link/20251029212312.108749-2-thomas@wismer.xyz
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
There is a race between operations that iterate over the userdata
cg_children list and concurrent add/remove of userdata items through
configfs. The update_userdata() function iterates over the
nt->userdata_group.cg_children list, and count_extradata_entries() also
iterates over this same list to count nodes.
Quoting from Documentation/filesystems/configfs.rst:
> A subsystem can navigate the cg_children list and the ci_parent pointer
> to see the tree created by the subsystem. This can race with configfs'
> management of the hierarchy, so configfs uses the subsystem mutex to
> protect modifications. Whenever a subsystem wants to navigate the
> hierarchy, it must do so under the protection of the subsystem
> mutex.
Without proper locking, if a userdata item is added or removed
concurrently while these functions are iterating, the list can be
accessed in an inconsistent state. For example, the list_for_each() loop
can reach a node that is being removed from the list by list_del_init()
which sets the nodes' .next pointer to point to itself, so the loop will
never end (or reach the WARN_ON_ONCE in update_userdata() ).
Fix this by holding the configfs subsystem mutex (su_mutex) during all
operations that iterate over cg_children.
This includes:
- userdatum_value_store() which calls update_userdata() to iterate over
cg_children
- All sysdata_*_enabled_store() functions which call
count_extradata_entries() to iterate over cg_children
The su_mutex must be acquired before dynamic_netconsole_mutex to avoid
potential lock ordering issues, as configfs operations may already hold
su_mutex when calling into our code.
Fixes: df03f830d0 ("net: netconsole: cache userdata formatted string in netconsole_target")
Signed-off-by: Gustavo Luiz Duarte <gustavold@gmail.com>
Link: https://patch.msgid.link/20251029-netconsole-fix-warn-v1-1-0d0dd4622f48@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
After registering a VLAN device and setting its feature flags, we need to
synchronize the VLAN features with the lower device. For example, the VLAN
device does not have the NETIF_F_LRO flag, it should be synchronized with
the lower device based on the NETIF_F_UPPER_DISABLES definition.
As the dev->vlan_features has changed, we need to call
netdev_update_features(). The caller must run after netdev_upper_dev_link()
links the lower devices, so this patch adds the netdev_update_features()
call in register_vlan_dev().
Fixes: fd867d51f8 ("net/core: generic support for disabling netdev features down stack")
Signed-off-by: Hangbin Liu <liuhangbin@gmail.com>
Link: https://patch.msgid.link/20251030073539.133779-1-liuhangbin@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The script "ethtool-common.sh" is not installed in INSTALL_PATH, and
triggers some errors when I try to run the test
'drivers/net/netdevsim/ethtool-coalesce.sh':
TAP version 13
1..1
# timeout set to 600
# selftests: drivers/net/netdevsim: ethtool-coalesce.sh
# ./ethtool-coalesce.sh: line 4: ethtool-common.sh: No such file or directory
# ./ethtool-coalesce.sh: line 25: make_netdev: command not found
# ethtool: bad command line argument(s)
# ./ethtool-coalesce.sh: line 124: check: command not found
# ./ethtool-coalesce.sh: line 126: [: -eq: unary operator expected
# FAILED /0 checks
not ok 1 selftests: drivers/net/netdevsim: ethtool-coalesce.sh # exit=1
Install this file to avoid this error. After this patch:
TAP version 13
1..1
# timeout set to 600
# selftests: drivers/net/netdevsim: ethtool-coalesce.sh
# PASSED all 22 checks
ok 1 selftests: drivers/net/netdevsim: ethtool-coalesce.sh
Fixes: fbb8531e58 ("selftests: extract common functions in ethtool-common.sh")
Signed-off-by: Wang Liang <wangliang74@huawei.com>
Link: https://patch.msgid.link/20251030040340.3258110-1-wangliang74@huawei.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
In hfcsusb_probe(), the memory allocated for ctrl_urb gets leaked when
setup_instance() fails with an error code. Fix that by freeing the urb
before freeing the hw structure. Also change the error paths to use the
goto ladder style.
Compile tested only. Issue found using a prototype static analysis tool.
Fixes: 69f52adb2d ("mISDN: Add HFC USB driver")
Signed-off-by: Abdun Nihaal <nihaal@cse.iitm.ac.in>
Link: https://patch.msgid.link/20251030042524.194812-1-nihaal@cse.iitm.ac.in
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The GRO self-test, gro.c, currently constructs IPv6 packets containing a
Hop-by-Hop Options header (IPPROTO_HOPOPTS) to ensure the GRO path
correctly handles IPv6 extension headers.
However, network elements may be configured to drop packets with the
Hop-by-Hop Options header (HBH). This causes the self-test to fail
in environments where such network elements are present.
To improve the robustness and reliability of this test in diverse
network environments, switch from using IPPROTO_HOPOPTS to
IPPROTO_DSTOPTS (Destination Options).
The Destination Options header is less likely to be dropped by
intermediate routers and still serves the core purpose of the test:
validating GRO's handling of an IPv6 extension header. This change
ensures the test can execute successfully without being incorrectly
failed by network policies outside the kernel's control.
Fixes: 7d1575014a ("selftests/net: GRO coalesce test")
Reviewed-by: Willem de Bruijn <willemb@google.com>
Signed-off-by: Anubhav Singh <anubhavsinggh@google.com>
Link: https://patch.msgid.link/20251030060436.1556664-1-anubhavsinggh@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Due to the gro_sender sending data packets and FIN packets
in very quick succession, these are received almost simultaneously
by the gro_receiver. FIN packets are sometimes processed before the
data packets leading to intermittent (~1/100) test failures.
This change adds a delay of 100ms before sending FIN packets
in gro:tcp test to avoid the out-of-order delivery. The same
mitigation already exists for the gro:ip test.
Fixes: 7d1575014a ("selftests/net: GRO coalesce test")
Reviewed-by: Willem de Bruijn <willemb@google.com>
Signed-off-by: Anubhav Singh <anubhavsinggh@google.com>
Link: https://patch.msgid.link/20251030062818.1562228-1-anubhavsinggh@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Parthiban Veerasooran says:
====================
net: phy: microchip_t1s: Add support for LAN867x Rev.D0 PHY
This patch series adds support for the latest Microchip LAN8670/1/2 Rev.D0
10BASE-T1S PHYs to the microchip_t1s driver.
The new Rev.D0 silicon introduces updated initialization requirements and
link status handling behavior compared to earlier revisions (Rev.C2 and
below). These updates are necessary for full compliance with the OPEN
Alliance 10BASE-T1S specification and are documented in Microchip
Application Note AN1699 Revision G (DS60001699G – October 2025).
Summary of changes:
- Implements Rev.D0-specific configuration sequence as described in AN1699
Rev.G.
- Introduces link status control configuration for LAN867x Rev.D0.
====================
Link: https://patch.msgid.link/20251030102258.180061-1-parthiban.veerasooran@microchip.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Configure the link status in the Link Status Control register for
LAN8670/1/2 Rev.D0 PHYs, depending on whether PLCA or CSMA/CD mode
is enabled. When PLCA is enabled, the link status reflects the PLCA
status. When PLCA is disabled (CSMA/CD mode), the PHY does not support
autonegotiation, so the link status is forced active by setting
the LINK_STATUS_SEMAPHORE bit.
The link status control is configured:
- During PHY initialization, for default CSMA/CD mode.
- Whenever PLCA configuration is updated.
This ensures correct link reporting and consistent behavior for
LAN867x Rev.D0 devices.
Signed-off-by: Parthiban Veerasooran <parthiban.veerasooran@microchip.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://patch.msgid.link/20251030102258.180061-3-parthiban.veerasooran@microchip.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
When operating in "SGMII" mode (Cisco SGMII or 2500BASE-X), qcom-ethqos
modifies the MAC control register in its ethqos_configure_sgmii()
function, which is only called from one path:
stmmac_mac_link_up()
+- reads MAC_CTRL_REG
+- masks out priv->hw->link.speed_mask
+- sets bits according to speed (2500, 1000, 100, 10) from priv->hw.link.speed*
+- ethqos_fix_mac_speed()
| +- qcom_ethqos_set_sgmii_loopback(false)
| +- ethqos_update_link_clk(speed)
| `- ethqos_configure(speed)
| `- ethqos_configure_sgmii(speed)
| +- reads MAC_CTRL_REG,
| +- configures PS/FES bits according to speed
| `- writes MAC_CTRL_REG as the last operation
+- sets duplex bit(s)
+- stmmac_mac_flow_ctrl()
+- writes MAC_CTRL_REG if changed from original read
...
As can be seen, the modification of the control register that
stmmac_mac_link_up() overwrites the changes that ethqos_fix_mac_speed()
does to the register. This makes ethqos_configure_sgmii()'s
modification questionable at best.
Analysing the values written, GMAC4 sets the speed bits as:
speed_mask = GMAC_CONFIG_FES | GMAC_CONFIG_PS
speed2500 = GMAC_CONFIG_FES B14=1 B15=0
speed1000 = 0 B14=0 B15=0
speed100 = GMAC_CONFIG_FES | GMAC_CONFIG_PS B14=1 B15=1
speed10 = GMAC_CONFIG_PS B14=0 B15=1
Whereas ethqos_configure_sgmii():
2500: clears ETHQOS_MAC_CTRL_PORT_SEL B14=X B15=0
1000: clears ETHQOS_MAC_CTRL_PORT_SEL B14=X B15=0
100: sets ETHQOS_MAC_CTRL_PORT_SEL | B14=1 B15=1
ETHQOS_MAC_CTRL_SPEED_MODE
10: sets ETHQOS_MAC_CTRL_PORT_SEL B14=0 B15=1
clears ETHQOS_MAC_CTRL_SPEED_MODE
Thus, they appear to be doing very similar, with the exception of the
FES bit (bit 14) for 1G and 2.5G speeds.
Given that stmmac_mac_link_up() will write the MAC_CTRL_REG after
ethqos_configure_sgmii(), remove the unnecessary update in the
glue driver's ethqos_configure_sgmii() method, simplifying the code.
Konrad states:
Without any additional knowledge, the register description says:
2500: B14=1 B15=0
1000: B14=0 B15=0
100: B14=1 B15=1
10: B14=0 B15=1
Tested-by: Mohd Ayaan Anwar <mohd.anwar@oss.qualcomm.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Link: https://patch.msgid.link/E1vEPlg-0000000CFHY-282A@rmk-PC.armlinux.org.uk
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Tariq Toukan says:
====================
Convert mlx5e and IPoIB to ndo_hwtstamp_get/set
This series by Carolina migrates mlx5e and IPoIB to the
ndo_hwtstamp_get/set interface and removes legacy hardware timestamp
ioctl handling. While doing so, it also cleans up naming and removes
redundant code.
No functional change in timestamp behavior.
Cleanup patches:
- net/mlx5e: Remove redundant tstamp pointer from channel structures
- net/mlx5e: Remove unnecessary tstamp local variable in mlx5i_complete_rx_cqe
- net/mlx5e: Rename hwstamp functions to hwtstamp
- net/mlx5e: Rename timestamp fields to hwtstamp_config
Add suppport in ipoib:
- IB/IPoIB: Add support for hwtstamp get/set ndos
Convert mlx5:
- net/mlx5e: Convert to new hwtstamp_get/set interface
====================
Link: https://patch.msgid.link/1761819910-1011051-1-git-send-email-tariqt@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Remove the tstamp pointer field from mlx5e_channel, mlx5e_ptp, and
mlx5e_trap structures, since it was only used to reference the tstamp
field in the priv structure. Instead, directly use the tstamp field
from priv when initializing RQ structures.
Also remove the unused hwtstamp_config field from mlx5_clock structure
as part of the cleanup.
Signed-off-by: Carolina Jubran <cjubran@nvidia.com>
Reviewed-by: Cosmin Ratiu <cratiu@nvidia.com>
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Link: https://patch.msgid.link/1761819910-1011051-2-git-send-email-tariqt@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The internal switch on BCM63XX SoCs will unconditionally add 802.1Q VLAN
tags on egress to CPU when 802.1Q mode is enabled. We do this
unconditionally since commit ed409f3bba ("net: dsa: b53: Configure
VLANs while not filtering").
This is fine for VLAN aware bridges, but for standalone ports and vlan
unaware bridges this means all packets are tagged with the default VID,
which is 0.
While the kernel will treat that like untagged, this can break userspace
applications processing raw packets, expecting untagged traffic, like
STP daemons.
This also breaks several bridge tests, where the tcpdump output then
does not match the expected output anymore.
Since 0 isn't a valid VID, just strip out the VLAN tag if we encounter
it, unless the priority field is set, since that would be a valid tag
again.
Fixes: 964dbf186e ("net: dsa: tag_brcm: add support for legacy tags")
Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com>
Reviewed-by: Vladimir Oltean <olteanv@gmail.com>
Link: https://patch.msgid.link/20251027194621.133301-1-jonas.gorski@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The PTP core falls back to gettimex64 and getcrosststamp when
getcycles64 or getcyclesx64 are not implemented. This causes the CYCLES
ioctls to retrieve PHC real time instead of free-running cycles.
Reject PTP_SYS_OFFSET_{PRECISE,EXTENDED}_CYCLES for clocks without
free-running counter support since the result would represent PHC real
time and system time rather than cycles and system time.
Fixes: faf23f54d3 ("ptp: Add ioctl commands to expose raw cycle counter values")
Signed-off-by: Carolina Jubran <cjubran@nvidia.com>
Reviewed-by: Dragos Tatulea <dtatulea@nvidia.com>
Reviewed-by: Tariq Toukan <tariqt@nvidia.com>
Reviewed-by: Pavan Chebbi <pavan.chebbi@broadcom.com>
Reviewed-by: Vadim Fedorenko <vadim.fedorenko@linux.dev>
Link: https://patch.msgid.link/20251029083813.2276997-1-cjubran@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Handle the NIC hardware link state events received from the HW
channel, then set the proper link state accordingly.
And, add a feature bit, GDMA_DRV_CAP_FLAG_1_HW_VPORT_LINK_AWARE,
to inform the NIC hardware this handler exists.
Our MANA NIC only sends out the link state down/up messages
when we need to let the VM rerun DHCP client and change IP
address. So, add netif_carrier_on() in the probe(), let the NIC
show the right initial state in /sys/class/net/ethX/operstate.
Signed-off-by: Haiyang Zhang <haiyangz@microsoft.com>
Link: https://patch.msgid.link/1761770601-16920-1-git-send-email-haiyangz@linux.microsoft.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Tim Hostetler says:
====================
gve: Fix NULL dereferencing with PTP clock
This patch series fixes NULL dereferences that are possible with gve's
PTP clock due to not stubbing certain ptp_clock_info callbacks.
====================
Link: https://patch.msgid.link/20251029184555.3852952-1-joshwash@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
When building with CONFIG_CFI=y and CONFIG_LTO_CLANG_FULL=y, there is a series
of errors from the various versions of clear_page() not having __kcfi_typeid_
symbols.
$ cat kernel/configs/repro.config
CONFIG_CFI=y
# CONFIG_LTO_NONE is not set
CONFIG_LTO_CLANG_FULL=y
$ make -skj"$(nproc)" ARCH=x86_64 LLVM=1 clean defconfig repro.config bzImage
ld.lld: error: undefined symbol: __kcfi_typeid_clear_page_rep
>>> referenced by ld-temp.o
>>> vmlinux.o:(__cfi_clear_page_rep)
ld.lld: error: undefined symbol: __kcfi_typeid_clear_page_orig
>>> referenced by ld-temp.o
>>> vmlinux.o:(__cfi_clear_page_orig)
ld.lld: error: undefined symbol: __kcfi_typeid_clear_page_erms
>>> referenced by ld-temp.o
>>> vmlinux.o:(__cfi_clear_page_erms)
With full LTO, it is possible for LLVM to realize that these functions never
have their address taken (as they are only used within an alternative, which
will make them a direct call) across the whole kernel and either drop or skip
generating their kCFI type identification symbols.
clear_page_{rep,orig,erms}() are defined in clear_page_64.S with
SYM_TYPED_FUNC_START as a result of
2981557cb0 ("x86,kcfi: Fix EXPORT_SYMBOL vs kCFI"),
as exported functions are free to be called indirectly thus need kCFI type
identifiers.
Use KCFI_REFERENCE with these clear_page() functions to force LLVM to see
these functions as address-taken and generate then keep the kCFI type
identifiers.
Fixes: 2981557cb0 ("x86,kcfi: Fix EXPORT_SYMBOL vs kCFI")
Closes: https://github.com/ClangBuiltLinux/linux/issues/2128
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Reviewed-by: Sami Tolvanen <samitolvanen@google.com>
Link: https://patch.msgid.link/20251013-x86-fix-clear_page-cfi-full-lto-errors-v1-1-d69534c0be61@kernel.org
Pull drm fixes from Simona Vetter:
"Looks like stochastics conspired to make this one a bit bigger, but
nothing scary at all. Also first examples of the new Link: tags, yay!
Next week Dave should be back.
Drivers:
- mediatek: uaf in unbind, fixes -rc2 boot regression
- radeon: devm conversion fixes
- amdgpu: VPE idle handler, re-enable DM idle optimization, DCN3,
SMU, vblank, HDP eDP, powerplay fixes for fiji/iceland
- msm: bunch of gem error path fixes, gmu fw parsing fix, dpu fixes
- intel: fix dmc/dc6 asserts on ADL-S
- xe: fix xe_validation_guard(), wake device handling around gt reset
- ast: fix display output on AST2300
- etnaviv: fix gpu flush
- imx: fix parallel bridge handling
- nouveau: scheduler locking fix
- panel: fixes for kingdisplay-kd097d04 and sitronix-st7789v
Core Changes:
- CI: disable broken sanity job
- sysfb: fix NULL pointer access
- sched: fix SIGKILL handling, locking for race condition
- dma_fence: better timeline name for signalled fences"
* tag 'drm-fixes-2025-10-31' of https://gitlab.freedesktop.org/drm/kernel: (44 commits)
drm/ast: Clear preserved bits from register output value
drm/imx: parallel-display: add the bridge before attaching it
drm/imx: parallel-display: convert to devm_drm_bridge_alloc() API
drm/panel: kingdisplay-kd097d04: Disable EoTp
drm/panel: sitronix-st7789v: fix sync flags for t28cp45tn89
drm/xe: Do not wake device during a GT reset
drm/xe: Fix uninitialized return value from xe_validation_guard()
drm/msm/dpu: Fix adjusted mode clock check for 3d merge
drm/msm/dpu: Disable broken YUV on QSEED2 hardware
drm/msm/dpu: Require linear modifier for writeback framebuffers
drm/msm/dpu: Fix pixel extension sub-sampling
drm/msm/dpu: Disable scaling for unsupported scaler types
drm/msm/dpu: Propagate error from dpu_assign_plane_resources
drm/msm/dpu: Fix allocation of RGB SSPPs without scaling
drm/msm: dsi: fix PLL init in bonded mode
drm/i915/dmc: Clear HRR EVT_CTL/HTP to zero on ADL-S
drm/amd/display: Fix incorrect return of vblank enable on unconfigured crtc
drm/amd/display: Add HDR workaround for a specific eDP
drm/amdgpu: fix SPDX header on cyan_skillfish_reg_init.c
drm/amdgpu: fix SPDX header on irqsrcs_vcn_5_0.h
...
Pull pci fixes from Bjorn Helgaas:
- Restore custom qcom ASPM enablement code so L1 PM Substates are
enabled as they were in v6.17 even though the PCI core now enables
just L0s and L1 by default (Bjorn Helgaas)
- Size prefetchable bridge windows only when they actually exist, to
avoid a WARN_ON() regression (Ilpo Järvinen)
* tag 'pci-v6.18-fixes-4' of git://git.kernel.org/pub/scm/linux/kernel/git/pci/pci:
PCI: Do not size non-existing prefetchable window
Revert "PCI: qcom: Remove custom ASPM enablement code"
Pull VFIO fixes from Alex Williamson:
- Fix overflows in vfio type1 backend for mappings at the end of the
64-bit address space, resulting in leaked pinned memory.
New selftest support included to avoid such issues in the future
(Alex Mastro)
* tag 'vfio-v6.18-rc4' of https://github.com/awilliam/linux-vfio:
vfio: selftests: add end of address space DMA map/unmap tests
vfio: selftests: update DMA map/unmap helpers to support more test kinds
vfio/type1: handle DMA map/unmap up to the addressable limit
vfio/type1: move iova increment to unmap_unpin_*() caller
vfio/type1: sanitize for overflow using check_*_overflow()
Linus Torvalds
Arnaldo Carvalho de Melo
Jason-JH Lin
Ariel D'Alessandro
Josh Poimboeuf
Jakub Horký
Bagas Sanjaya
Jakub Kicinski
Ivan Vecera
Thomas Wismer
Gustavo Luiz Duarte
Hangbin Liu
Wang Liang
Abdun Nihaal
Anubhav Singh
Parthiban Veerasooran
Russell King (Oracle)
Carolina Jubran
Jonas Gorski
Haiyang Zhang
Tim Hostetler
Nathan Chancellor