The log messages for the PreSonus STUDIO 1810c about
device_setup are not applicable to the 1824c, and should
not be logged when 1824c initializes.
Refactor from if statement to switch statement as there
might be more STUDIO series devices added later.
Fixes: 080564558e ("ALSA: usb-audio: enable support for Presonus Studio 1824c within 1810c file")
Signed-off-by: Roy Vegard Ovesen <roy.vegard.ovesen@gmail.com>
Link: https://patch.msgid.link/aPaYTP7ceuABf8c7@ark
Signed-off-by: Takashi Iwai <tiwai@suse.de>
In multi-radio wiphy architecture, where a single wiphy can have
multiple radios tied to it, radio specific configuration parameters
and global wiphy parameters are maintained for the entire physical
device and common to all radios. But, each radio in a wiphy can
have different values for each radio configuration parameter like
RTS threshold. With the current debugfs directory structure, the
values of global wiphy configuration parameters can be viewed, but,
values of individual radio configuration parameters cannot be viewed.
To address this requirement, maintain separate entries of each radio
configuration parameter i.e., RTS threshold in corresponding radio-
specific debugfs directory. This way, radio-specific configuration
parameters can be maintained along with global wiphy configuration
parameters. Whenever the values are changed for one radio, the values
for rest of the radios in the wiphy and the global wiphy parameter
value will remain intact.
Sample output:
/# iw phy#0 set rts 100 radio 1
/# iw phy#0 set rts 468 radio 0
/# cat /sys/kernel/debug/ieee80211/phy0/rts_threshold
-1
/# cat /sys/kernel/debug/ieee80211/phy0/radio0/radio_rts_threshold
468
/# cat /sys/kernel/debug/ieee80211/phy0/radio1/radio_rts_threshold
100
/# iw phy#0 set rts 500
/# cat /sys/kernel/debug/ieee80211/phy0/rts_threshold
500
/# cat /sys/kernel/debug/ieee80211/phy0/radio0/radio_rts_threshold
500
/# cat /sys/kernel/debug/ieee80211/phy0/radio1/radio_rts_threshold
500
Signed-off-by: Roopni Devanathan <quic_rdevanat@quicinc.com>
Link: https://patch.msgid.link/20251024044649.483557-3-quic_rdevanat@quicinc.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
In multi-radio wiphy architecture, where a single wiphy can have
multiple radios tied to it, radio specific configuration parameters
and global wiphy parameters are maintained for the entire physical
device and common to all radios. But, each radio in a wiphy can have
different values for each radio configuration parameter, like RTS
threshold. With the current debugfs directory structure, the values
of global wiphy configuration parameters can be viewed, but, values
of individual radio configuration parameters cannot be viewed, as
radio specific configuration parameters are not maintained, separately.
To address this, in addition to maintaining global wiphy configuration
parameters common to all radios, create separate debugfs directories
for each radio in a wiphy to maintain parameters corresponding to that
radio in this directory.
In implementation, maintain a dentry structure in wiphy_radio_cfg, a
structure containing radio configurations of a wiphy. This struct is
maintained to denote per-radio configurations of a wiphy. Create
separate directories representing each radio within phy#X directory in
debugfs during wiphy registration.
Sample directory structure with this change:
ls /sys/kernel/debug/ieee80211/phy0/radio
radio0/ radio1/ radio2/
Signed-off-by: Roopni Devanathan <quic_rdevanat@quicinc.com>
Link: https://patch.msgid.link/20251024044649.483557-2-quic_rdevanat@quicinc.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Currently, RX bitrate statistics are not updated for packets received
on the mesh forwarding path during fast RX processing. This results in
incomplete RX rate tracking in station dump outputs for mesh scenarios.
Update ieee80211_invoke_fast_rx() to record the RX rate using
sta_stats_encode_rate() and store it in the last_rate field of
ieee80211_sta_rx_stats when RX_QUEUED is returned from
ieee80211_rx_mesh_data(). This ensures that RX bitrate is properly
accounted for in both RSS and non-RSS paths.
Signed-off-by: Sarika Sharma <sarika.sharma@oss.qualcomm.com>
Link: https://patch.msgid.link/20251024043627.1640447-1-sarika.sharma@oss.qualcomm.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
When management frames are passed down to be transmitted by usermode, often
times the NL80211_ATTR_CHANNEL_WIDTH is not used as its implied to be
transmitted on the control width. This can lead to errors during chandef
validation as the offsets from the channel center are wrong. Ensure we
initialise S1G chandefs to a width of 1MHz rather then 20MHz.
Signed-off-by: Lachlan Hodges <lachlan.hodges@morsemicro.com>
Link: https://patch.msgid.link/20251021061201.235754-1-lachlan.hodges@morsemicro.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
If userspace provides a puncturing bitmap via the NL80211_ATTR_PUNCT_BITMAP
attribute, the kernel with mac80211_hwsim driver currently rejects the
command with the error: "driver doesn't support puncturing", because the
driver does not advertise support for this feature.
At present, the following hwsim test cases utilize puncturing, but the
bitmap is not sent to the kernel. Instead, the puncturing information is
conveyed only through the beacon data:
* eht_5ghz_80mhz_puncturing_override_1
* eht_5ghz_80mhz_puncturing_override_2
* eht_5ghz_80mhz_puncturing_override_3
A future change in hostapd will begin configuring the puncturing bitmap
explicitly, which will cause these test cases to fail unless the driver
advertises support.
To address this, update mac80211_hwsim driver to advertise puncturing
feature support.
Signed-off-by: Aditya Kumar Singh <aditya.kumar.singh@oss.qualcomm.com>
Link: https://patch.msgid.link/20251017-hwsim_set_punct_feature_bit-v1-1-3be1bb3450c0@oss.qualcomm.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
In multi-radio devices, it is possible to have an MLD AP and a monitor
interface active at the same time. In such cases, monitor mode may not
be able to specify a fixed channel and could end up capturing frames
from all radios, including those outside the intended frequency bands.
This patch adds frequency validation for monitor mode. Received frames
are now only processed if their frequency fall within the allowed ranges
of the radios specified by the interface's radio_mask.
This prevents monitor mode from capturing frames outside the supported radio.
Signed-off-by: Ryder Lee <ryder.lee@mediatek.com>
Link: https://patch.msgid.link/700b8284e845d96654eb98431f8eeb5a81503862.1758647858.git.ryder.lee@mediatek.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
of_get_mac_address can return -EPROBE_DEFER when nvmem is not probed yet
for whatever reason. In this case, nvmem mac assignments will not work.
Based on the function path, this change only has effect for rt2800soc.c
and rt2800pci.c. The former tends to use nvmem for assignments.
Signed-off-by: Rosen Penev <rosenp@gmail.com>
Acked-by: Stanislaw Gruszka <stf_xl@wp.pl>
Link: https://patch.msgid.link/20251014050833.46377-1-rosenp@gmail.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
All handlers triggered by ib_drain_qp() should already see the
broken connection.
smb_direct_cm_handler() is called under a mutex of the rdma_cm,
we should make sure ib_drain_qp() and all rdma layer logic completes
and unlocks the mutex.
It means free_transport() will also already see the connection
as SMBDIRECT_SOCKET_DISCONNECTED, so we need to call
crdma_[un]lock_handler(sc->rdma.cm_id) around
ib_drain_qp(), rdma_destroy_qp(), ib_free_cq() and ib_dealloc_pd().
Otherwise we free resources while the ib_drain_qp() within
smb_direct_cm_handler() is still running.
We have to unlock before rdma_destroy_id() as it locks again.
Fixes: 141fa9824c ("ksmbd: call ib_drain_qp when disconnected")
Fixes: 4c564f03e2 ("smb: server: make use of common smbdirect_socket")
Cc: Namjae Jeon <linkinjeon@kernel.org>
Cc: Steve French <smfrench@gmail.com>
Cc: Tom Talpey <tom@talpey.com>
Cc: linux-cifs@vger.kernel.org
Cc: samba-technical@lists.samba.org
Signed-off-by: Stefan Metzmacher <metze@samba.org>
Acked-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
We now activate sc->recv_io.posted.refill_work and sc->idle.immediate_work
only after a successful negotiation, before sending the negotiation
response.
It means the queue_work(sc->workqueue, &sc->recv_io.posted.refill_work)
in put_recvmsg() of the negotiate request, is a no-op now.
It also means our explicit smb_direct_post_recv_credits() will
have queue_work(sc->workqueue, &sc->idle.immediate_work) as no-op.
This should make sure we don't have races and post any immediate
data_transfer message that tries to grant credits to the peer,
before we send the negotiation response, as that will grant
the initial credits to the peer.
Fixes: 0626e6641f ("cifsd: add server handler for central processing and tranport layers")
Fixes: 1cde0a74a7 ("smb: server: don't use delayed_work for post_recv_credits_work")
Cc: Namjae Jeon <linkinjeon@kernel.org>
Cc: Steve French <smfrench@gmail.com>
Cc: Tom Talpey <tom@talpey.com>
Cc: linux-cifs@vger.kernel.org
Cc: samba-technical@lists.samba.org
Signed-off-by: Stefan Metzmacher <metze@samba.org>
Acked-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
handle_response() dereferences the payload as a 4-byte handle without
verifying that the declared payload size is at least 4 bytes. A malformed
or truncated message from ksmbd.mountd can lead to a 4-byte read past the
declared payload size. Validate the size before dereferencing.
This is a minimal fix to guard the initial handle read.
Fixes: 0626e6641f ("cifsd: add server handler for central processing and tranport layers")
Cc: stable@vger.kernel.org
Reported-by: Qianchang Zhao <pioooooooooip@gmail.com>
Signed-off-by: Qianchang Zhao <pioooooooooip@gmail.com>
Acked-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
Pull char/misc driver fixes from Greg KH:
"Here are some small char/misc/android driver fixes for 6.18-rc3 for
reported issues. Included in here are:
- rust binder fixes for reported issues
- mei device id addition
- mei driver fixes
- comedi bugfix
- most usb driver bugfixes
- fastrpc memory leak fix
All of these have been in linux-next for a while with no reported
issues"
* tag 'char-misc-6.18-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc:
most: usb: hdm_probe: Fix calling put_device() before device initialization
most: usb: Fix use-after-free in hdm_disconnect
binder: remove "invalid inc weak" check
mei: txe: fix initialization order
comedi: fix divide-by-zero in comedi_buf_munge()
mei: late_bind: Fix -Wincompatible-function-pointer-types-strict
misc: fastrpc: Fix dma_buf object leak in fastrpc_map_lookup
mei: me: add wildcat lake P DID
misc: amd-sbi: Clarify that this is a BMC driver
nvmem: rcar-efuse: add missing MODULE_DEVICE_TABLE
binder: Fix missing kernel-doc entries in binder.c
rust_binder: report freeze notification only when fully frozen
rust_binder: don't delete FreezeListener if there are pending duplicates
rust_binder: freeze_notif_done should resend if wrong state
rust_binder: remove warning about orphan mappings
rust_binder: clean `clippy::mem_replace_with_default` warning
Pull staging driver fixes from Greg KH:
"Here are some small staging driver fixes for the gpib subsystem to
resolve some reported issues. Included in here are:
- memory leak fixes
- error code fixes
- proper protocol fixes
All of these have been in linux-next for almost 2 weeks now with no
reported issues"
* tag 'staging-6.18-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging:
staging: gpib: Fix device reference leak in fmh_gpib driver
staging: gpib: Return -EINTR on device clear
staging: gpib: Fix sending clear and trigger events
staging: gpib: Fix no EOI on 1 and 2 byte writes
Pull tty/serial driver fixes from Greg KH:
"Here are some small tty and serial driver fixes for reported issues.
Included in here are:
- sh-sci serial driver fixes
- 8250_dw and _mtk driver fixes
- sc16is7xx driver bugfix
- new 8250_exar device ids added
All of these have been in linux-next this past week with no reported
issues"
* tag 'tty-6.18-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty:
serial: 8250_mtk: Enable baud clock and manage in runtime PM
serial: 8250_dw: handle reset control deassert error
dt-bindings: serial: sh-sci: Fix r8a78000 interrupts
serial: sc16is7xx: remove useless enable of enhanced features
serial: 8250_exar: add support for Advantech 2 port card with Device ID 0x0018
tty: serial: sh-sci: fix RSCI FIFO overrun handling
Pull USB driver fixes from Greg KH:
"Here are some small USB driver fixes and new device ids for 6.18-rc3.
Included in here are:
- new option serial driver device ids added
- dt bindings fixes for numerous platforms
- xhci bugfixes for many reported regressions
- usbio dependency bugfix
- dwc3 driver fix
- raw-gadget bugfix
All of these have been in linux-next this week with no reported issues"
* tag 'usb-6.18-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb:
USB: serial: option: add Telit FN920C04 ECM compositions
USB: serial: option: add Quectel RG255C
tcpm: switch check for role_sw device with fw_node
usb/core/quirks: Add Huawei ME906S to wakeup quirk
usb: raw-gadget: do not limit transfer length
USB: serial: option: add UNISOC UIS7720
xhci: dbc: enable back DbC in resume if it was enabled before suspend
xhci: dbc: fix bogus 1024 byte prefix if ttyDBC read races with stall event
usb: xhci-pci: Fix USB2-only root hub registration
dt-bindings: usb: qcom,snps-dwc3: Fix bindings for X1E80100
usb: misc: Add x86 dependency for Intel USBIO driver
dt-bindings: usb: switch: split out ports definition
usb: dwc3: Don't call clk_bulk_disable_unprepare() twice
dt-bindings: usb: dwc3-imx8mp: dma-range is required only for imx8mp
Pull x86 fixes from Borislav Petkov:
- Remove dead code leftovers after a recent mitigations cleanup which
fail a Clang build
- Make sure a Retbleed mitigation message is printed only when
necessary
- Correct the last Zen1 microcode revision for which Entrysign sha256
check is needed
- Fix a NULL ptr deref when mounting the resctrl fs on a system which
supports assignable counters but where L3 total and local bandwidth
monitoring has been disabled at boot
* tag 'x86_urgent_for_v6.18_rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/bugs: Remove dead code which might prevent from building
x86/bugs: Qualify RETBLEED_INTEL_MSG
x86/microcode: Fix Entrysign revision check for Zen1/Naples
x86,fs/resctrl: Fix NULL pointer dereference with events force-disabled in mbm_event mode
Pull irq fixes from Borislav Petkov:
- Restore the original buslock locking in a couple of places in the irq
core subsystem after a rework
* tag 'irq_urgent_for_v6.18_rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
genirq/manage: Add buslock back in to enable_irq()
genirq/manage: Add buslock back in to __disable_irq_nosync()
genirq/chip: Add buslock back in to irq_set_handler()
Pull objtool fixes from Borislav Petkov:
- Fix x32 build due to wrong format specifier on that sub-arch
- Add one more Rust noreturn function to objtool's list
* tag 'objtool_urgent_for_v6.18_rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
objtool: Fix failure when being compiled on x32 system
objtool/rust: add one more `noreturn` Rust function
Pull scheduler fix from Borislav Petkov:
- Make sure a CFS runqueue on a throttled hierarchy has its PELT clock
throttled otherwise task movement and manipulation would lead to
dangling cfs_rq references and an eventual crash
* tag 'sched_urgent_for_v6.18_rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
sched/fair: Start a cfs_rq on throttled hierarchy with PELT clock throttled
Pull timer fix from Borislav Petkov:
- Do not create more than eight (max supported) AUX clocks sysfs
hierarchies
* tag 'timers_urgent_for_v6.18_rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
timekeeping: Fix aux clocks sysfs initialization loop bound
Commit b5e3956535 ("kbuild: install-extmod-build: Fix build when
specifying KBUILD_OUTPUT") tried to address the "build" variable
expecting a relative path by using `realpath --relative-base=.`, but
this only works when the given directory is below the current directory.
`realpath --relative-to=.` will return a relative path in all cases.
Fixes: b5e3956535 ("kbuild: install-extmod-build: Fix build when specifying KBUILD_OUTPUT")
Signed-off-by: James Le Cuirot <chewi@gentoo.org>
Reviewed-by: Nicolas Schier <nsc@kernel.org>
Link: https://patch.msgid.link/20251016091417.9985-1-chewi@gentoo.org
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
Pull driver core fixes from Danilo Krummrich:
- In Device::parent(), do not make any assumptions on the device
context of the parent device
- Check visibility before changing ownership of a sysfs attribute
group
- In topology_parse_cpu_capacity(), replace an incorrect usage of
PTR_ERR_OR_ZERO() with IS_ERR_OR_NULL()
- In devcoredump, fix a circular locking dependency between
struct devcd_entry::mutex and kernfs
- Do not warn about a pending fw_devlink sync state
* tag 'driver-core-6.18-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/driver-core/driver-core:
arch_topology: Fix incorrect error check in topology_parse_cpu_capacity()
rust: device: fix device context of Device::parent()
sysfs: check visibility before changing group attribute ownership
devcoredump: Fix circular locking dependency with devcd->mutex.
driver core: fw_devlink: Don't warn about sync_state() pending
Pull firewire fixes from Takashi Sakamoto:
"A small collection of FireWire fixes. This includes corrections to
sparse and API documentation"
* tag 'firewire-fixes-6.18-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/ieee1394/linux1394:
firewire: init_ohci1394_dma: add missing function parameter documentation
firewire: core: fix __must_hold() annotation
Pull RISC-V fixes from Paul Walmsley:
- Close a race during boot between userspace vDSO usage and some
late-initialized vDSO data
- Improve performance on systems with non-CPU-cache-coherent
DMA-capable peripherals by enabling write combining on
pgprot_dmacoherent() allocations
- Add human-readable detail for RISC-V IPI tracing
- Provide more information to zsmalloc on 64-bit RISC-V to improve
allocation
- Silence useless boot messages about CPUs that have been disabled in
DT
- Resolve some compiler and smatch warnings and remove a redundant
macro
* tag 'riscv-for-linus-6.18-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux:
riscv: hwprobe: avoid uninitialized variable use in hwprobe_arch_id()
riscv: cpufeature: avoid uninitialized variable in has_thead_homogeneous_vlenb()
riscv: hwprobe: Fix stale vDSO data for late-initialized keys at boot
riscv: add a forward declaration for cpuinfo_op
RISC-V: Don't print details of CPUs disabled in DT
riscv: Remove the PER_CPU_OFFSET_SHIFT macro
riscv: mm: Define MAX_POSSIBLE_PHYSMEM_BITS for zsmalloc
riscv: Register IPI IRQs with unique names
ACPI: RIMT: Fix unused function warnings when CONFIG_IOMMU_API is disabled
RISC-V: Define pgprot_dmacoherent() for non-coherent devices
Pull xfs fixes from Carlos Maiolino:
"The main highlight here is a fix for a bug brought in by the removal
of attr2 mount option, where some installations might actually have
'attr2' explicitly configured in fstab preventing system to boot by
not being able to remount the rootfs as RW.
Besides that there are a couple fix to the zonefs implementation,
changing XFS_ONLINE_SCRUB_STATS to depend on DEBUG_FS (was select
before), and some other minor changes"
* tag 'xfs-fixes-6.18-rc3' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux:
xfs: fix locking in xchk_nlinks_collect_dir
xfs: loudly complain about defunct mount options
xfs: always warn about deprecated mount options
xfs: don't set bt_nr_sectors to a negative number
xfs: don't use __GFP_NOFAIL in xfs_init_fs_context
xfs: cache open zone in inode->i_private
xfs: avoid busy loops in GCD
xfs: XFS_ONLINE_SCRUB_STATS should depend on DEBUG_FS
xfs: do not tightly pack-write large files
xfs: Improve CONFIG_XFS_RT Kconfig help
Before this patch during either switchdev or legacy mode enablement we
cleared the mac address of vports between changes. This change allows us
to preserve the vports mac address between eswitch mode changes.
Vports hold information for VFs/SFs such as the permanent mac address.
VF/SF mac can be set either by iproute vf interface or devlink function
interface. For no obvious reason we reset it to 0 on switchdev/legacy
mode changes, this patch is fixing that, to align with other vport
information that are never reset, e.g GUID,mtu,promisc mode, etc ..
Signed-off-by: Adithya Jayachandran <ajayachandra@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Reviewed-by: Mark Bloch <mbloch@nvidia.com>
Acked-by: Leon Romanovsky <leon@kernel.org> # RDMA
Heiko Stuebner says:
====================
DWMAC support for Rockchip RK3506
Some cleanups to the DT binding for Rockchip variants of the dwmac
and adding the RK3506 support on top.
As well as the driver-glue needed for setting up the correct RMII
speed seitings.
====================
Link: https://patch.msgid.link/20251023111213.298860-1-heiko@sntech.de
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The dwmac-rk glue driver is currently not caught by the general maintainer
entry for Rockchip SoCs, so add it explicitly, similar to the i2c driver.
The binding document in net/rockchip-dwmac.yaml already gets caught by
the wildcard match.
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://patch.msgid.link/20251023111213.298860-6-heiko@sntech.de
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Lad Prabhakar says:
====================
net: ravb: SoC-specific configuration
This series addresses several issues in the Renesas Ethernet AVB (ravb)
driver related to SoC-specific resource configuration.
The series includes the following changes:
- Make DBAT entry count configurable per SoC
The number of descriptor base address table (DBAT) entries is not uniform
across all SoCs. Pass this information via the hardware info structure and
allocate resources accordingly.
- Allocate correct number of queues based on SoC support
Use the per-SoC configuration to determine whether a network control queue
is available, and allocate queues dynamically to match the SoC's
capability.
v2: https://lore.kernel.org/20251017151830.171062-1-prabhakar.mahadev-lad.rj@bp.renesas.com
====================
Link: https://patch.msgid.link/20251023112111.215198-1-prabhakar.mahadev-lad.rj@bp.renesas.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Avoid wasting coherent DMA memory by allocating the descriptor base
address table sized for the actual number of DBAT/CDARq entries supported
by the SoC. Some platforms (for example GBETH) only provide two CDARq
entries; previously the driver always allocated space for 22 entries which
needlessly consumed memory on those systems.
Pass the per-SoC dbat_entry_num via struct ravb_hw_info and use it for
allocation and initialization in probe. This sizes the table correctly and
removes the unnecessary memory overhead on SoCs with fewer DBAT entries.
Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Reviewed-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
Link: https://patch.msgid.link/20251023112111.215198-2-prabhakar.mahadev-lad.rj@bp.renesas.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Russell King says:
====================
net: stmmac: pcs support part 2
This is the next part of stmmac PCS support. Not much here, other than
dealing with what remains of the interrupts, which are the PCS AN
complete and PCS Link interrupts, which are just cleared and update
accounting.
Currently, they are enabled at core init time, but if we have an
implementation that supports multiple PHY interfaces, we want to
enable only the appropriate interrupts.
I also noticed that stmmac_fpe_configure_pmac() also modifies the
interrupt mask during run time. As a pre-requisit, we need a way
to ensure that we don't have different threads modifying the
interrupt settings at the same time. So, the first patch introduces
a new function and a spinlock which must be held when manipulating
the interrupt enable/mask state.
The second patch adds the PCS bits for enabling the PCS AN and PCS
link interrupts when the PCS is in-use.
====================
Link: https://patch.msgid.link/aPn5YVeUcWo4CW3c@shell.armlinux.org.uk
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Russell King says:
====================
net: add phylink managed WoL and convert stmmac
This series is implementing the thoughts of Andrew, Florian and myself
to improve the quality of Wake-on-Lan (WoL) implementations.
This changes nothing for MAC drivers that do not wish to participate in
this, but if they do, then they gain the benefit of phylink configuring
WoL at the point closest to the media as possible.
We first need to solve the problem that the multitude of PHY drivers
report their device supports WoL, but are not capable of waking the
system. Correcting this is fundamental to choosing where WoL should be
enabled - a mis-reported WoL support can render WoL completely
ineffective.
The only PHY drivers which uses the driver model's wakeup support is
drivers/net/phy/broadcom.c, and until recently, realtek. This means
we have the opportunity for PHY drivers to be _correctly_ converted
to use this method of signalling wake-up capability only when they can
actually wake the system, and thus providing a way for phylink to
know whether to use PHY-based WoL at all.
However, a PHY driver not implementing that logic doesn't become a
blocker to MACs wanting to convert. In full, the logic is:
- phylink supports a flag, wol_phy_legacy, which forces phylink to use
the PHY-based WoL even if the MDIO device is not marked as wake-up
capable.
- when wol_phy_legacy is not set, we check whether the PHY MDIO device
is wake-up capable. If it is, we offer the WoL request to the PHY.
- if neither wol_phy_legacy is set, or the PHY is not wake-up capable,
we do not offer the WoL request to the PHY.
In both cases, after setting any PHY based WoL, we remove the options
that the PHY now reports are enabled from the options mask, and offer
these (if any) to the MAC. The mac will get a "mac_set_wol()" method
call when any settings change.
Phylink mainatains the WoL state for the MAC, so there's no need for
a "mac_get_wol()" method. There may be the need to set the initial
state but this is not supported at present.
I've also added support for doing the PHY speed-up/speed-down at
suspend/resume time depending on the WoL state, which takes another
issue from the MAC authors.
Lastly, with phylink now having the full picture for WoL, the
"mac_wol" argument for phylink_suspend() becomes redundant, and for
MAC drivers that implement mac_set_wol(), the value passed becomes
irrelevant.
====================
Link: https://patch.msgid.link/aPnyW54J80h9DmhB@shell.armlinux.org.uk
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Convert stmmac to use phylink-managed Wake-on-Lan support. To achieve
this, we implement the .mac_wol_set() method, which simply configures
the driver model's struct device wakeup for stmmac, and sets the
priv->wolopts appropriately.
When STMMAC_FLAG_USE_PHY_WOL is set, in the stmmac world this means to
only use the PHY's WoL support and ignore the MAC's WoL capabilities.
To preserve this behaviour, we enable phylink's legacy mode, and avoid
telling phylink that the MAC has any WoL support. This achieves the
same functionality for this case.
When STMMAC_FLAG_USE_PHY_WOL is not set, we provide the MAC's WoL
capabilities to phylink, which then allows phylink to choose between
the PHY and MAC for WoL depending on their individual capabilities
as described in the phylink commit. This only augments the WoL
functionality with PHYs that declare to the driver model that they are
wake-up capable. Currently, very few PHY drivers support this.
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Link: https://patch.msgid.link/E1vBrRC-0000000BLzg-2tA4@rmk-PC.armlinux.org.uk
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Roy Vegard Ovesen
Roopni Devanathan
Sarika Sharma
Lachlan Hodges
Johannes Berg
Aditya Kumar Singh
Ryder Lee
Rosen Penev
Stefan Metzmacher
Qianchang Zhao
Steve French
Linus Torvalds
Thomas Zimmermann
James Le Cuirot
Rob Clark
Adithya Jayachandran
Emanuele Ghidoli
Jakub Kicinski
Heiko Stuebner
David Wu
Lad Prabhakar
Oliver Neukum
Russell King (Oracle)