Socket dst_type cannot be directly assigned to hci_conn->type since
there domain is different which may lead to the wrong address type being
used.
Fixes: 6a5ad251b7 ("Bluetooth: ISO: Fix possible circular locking dependency")
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
This reverts commit c9d84da18d. It
replaces in L2CAP calls to msecs_to_jiffies() to secs_to_jiffies()
and updates the constants accordingly. But the constants are also
used in LCAP Configure Request and L2CAP Configure Response which
expect values in milliseconds.
This may prevent correct usage of L2CAP channel.
To fix it, keep those constants in milliseconds and so revert this
change.
Fixes: c9d84da18d ("Bluetooth: L2CAP: convert timeouts to secs_to_jiffies()")
Signed-off-by: Frédéric Danis <frederic.danis@collabora.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
There is a BUG: KASAN: stack-out-of-bounds in set_mesh_sync due to
memcpy from badly declared on-stack flexible array.
Another crash is in set_mesh_complete() due to double list_del via
mgmt_pending_valid + mgmt_pending_remove.
Use DEFINE_FLEX to declare the flexible array right, and don't memcpy
outside bounds.
As mgmt_pending_valid removes the cmd from list, use mgmt_pending_free,
and also report status on error.
Fixes: 302a1f674c ("Bluetooth: MGMT: Fix possible UAFs")
Signed-off-by: Pauli Virtanen <pav@iki.fi>
Reviewed-by: Paul Menzel <pmenzel@molgen.mpg.de>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
This fixes the state tracking of advertisement set/instance 0x00 which
is considered a legacy instance and is not tracked individually by
adv_instances list, previously it was assumed that hci_dev itself would
track it via HCI_LE_ADV but that is a global state not specifc to
instance 0x00, so to fix it a new flag is introduced that only tracks the
state of instance 0x00.
Fixes: 1488af7b8b ("Bluetooth: hci_sync: Fix hci_resume_advertising_sync")
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
This patch adds logic to handle power management control when the
Bluetooth function is closed during the SDIO reset sequence.
Specifically, if BT is closed before reset, the driver enables the
SDIO function and sets driver pmctrl. After reset, if BT remains
closed, the driver sets firmware pmctrl and disables the SDIO function.
These changes ensure proper power management and device state consistency
across the reset flow.
Fixes: 8fafe70225 ("Bluetooth: mt7921s: support bluetooth reset mechanism")
Signed-off-by: Chris Lu <chris.lu@mediatek.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Socket dst_type cannot be directly assigned to hci_conn->type since
there domain is different which may lead to the wrong address type being
used.
Fixes: 6a5ad251b7 ("Bluetooth: ISO: Fix possible circular locking dependency")
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
hci_cmd_sync_dequeue_once() does lookup and then cancel
the entry under two separate lock sections. Meanwhile,
hci_cmd_sync_work() can also delete the same entry,
leading to double list_del() and "UAF".
Fix this by holding cmd_sync_work_lock across both
lookup and cancel, so that the entry cannot be removed
concurrently.
Fixes: 505ea2b295 ("Bluetooth: hci_sync: Add helper functions to manipulate cmd_sync queue")
Reported-by: Cen Zhang <zzzccc427@163.com>
Signed-off-by: Cen Zhang <zzzccc427@163.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Commit c1e18c17bd ("s390/pci: add zpci_set_irq()/zpci_clear_irq()"),
introduced the zpci_set_irq() and zpci_clear_irq(), to be used while
resetting a zPCI device.
Commit da995d538d ("s390/pci: implement reset_slot for hotplug
slot"), mentions zpci_clear_irq() being called in the path for
zpci_hot_reset_device(). But that is not the case anymore and these
functions are not called outside of this file. Instead
zpci_hot_reset_device() relies on zpci_disable_device() also clearing
the IRQs, but misses to reset the zdev->irqs_registered flag.
However after a CLP disable/enable reset, the device's IRQ are
unregistered, but the flag zdev->irq_registered does not get cleared. It
creates an inconsistent state and so arch_restore_msi_irqs() doesn't
correctly restore the device's IRQ. This becomes a problem when a PCI
driver tries to restore the state of the device through
pci_restore_state(). Restore IRQ unconditionally for the device and remove
the irq_registered flag as its redundant.
Fixes: c1e18c17bd ("s390/pci: add zpci_set_irq()/zpci_clear_irq()")
Cc: stable@vger.kernnel.org
Reviewed-by: Niklas Schnelle <schnelle@linux.ibm.com>
Reviewed-by: Matthew Rosato <mjrosato@linux.ibm.com>
Signed-off-by: Farhan Ali <alifm@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Johan writes:
USB serial device ids for 6.18-rc3
Here are some new modem device ids.
All have been in linux-next with no reported issues.
* tag 'usb-serial-6.18-rc3' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/johan/usb-serial:
USB: serial: option: add Telit FN920C04 ECM compositions
USB: serial: option: add Quectel RG255C
USB: serial: option: add UNISOC UIS7720
If two competing threads enter alloc_slab_obj_exts(), and the one that
allocates the vector wins the cmpxchg(), the other thread that failed
allocation mistakenly assumes that slab->obj_exts is still empty due to
its own allocation failure. This will then trigger warnings with
CONFIG_MEM_ALLOC_PROFILING_DEBUG checks in the subsequent free path.
Therefore, let's check the result of cmpxchg() to see if marking the
allocation as failed was successful. If it wasn't, check whether the
winning side has succeeded its allocation (it might have been also
marking it as failed) and if yes, return success.
Suggested-by: Harry Yoo <harry.yoo@oracle.com>
Fixes: f7381b9116 ("slab: mark slab->obj_exts allocation failures unconditionally")
Cc: <stable@vger.kernel.org>
Signed-off-by: Hao Ge <gehao@kylinos.cn>
Link: https://patch.msgid.link/20251023143313.1327968-1-hao.ge@linux.dev
Reviewed-by: Suren Baghdasaryan <surenb@google.com>
Reviewed-by: Harry Yoo <harry.yoo@oracle.com>
Signed-off-by: Vlastimil Babka <vbabka@suse.cz>
Merge series from Shengjiu Wang <shengjiu.wang@nxp.com>:
The DSD little endian format requires the msb first, the previous
understanding is not correct. The issue is found by testing with
pipewire.
Merge series from Cezary Rojewski <cezary.rojewski@intel.com>:
Small set of patches two of which fix problems observed during shutdown
and XRUN scenarios for PCM streaming. These ensure HDAudio HOST stream
is reset and re-setup during XRUNs and synchronize avs_dai_fe_shutdown()
and period-elapsed work (thread) so that no slab-use-after-free panics
occur.
The last change makes the 'format' parameter provided by a
compress-application taken into account - currently its ignored. Such
approach helps us increase the coverage of data probing (debug)
functionality.
During DT-binding review for extending the V4L2 camera sensor privacy LED
support to systems using devicetree, it has come up that having a "-led"
suffix for the LED name / con_id is undesirable since it already is clear
that it is a LED.
Drop the "-led" suffix from the con_id in both the lookup table in
the int3472 code, as well as from the con_id led_get() argument in
the v4l2-subdev code.
Signed-off-by: Hans de Goede <hansg@kernel.org>
Acked-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
Device-managed resources are cleaned up when the driver unbinds from
the underlying device. In our case this is the platform device as this
driver is a platform driver. Registering device-managed resources on
the associated ACPI device will thus result in a resource leak when
this driver unbinds.
Ensure that any device-managed resources are only registered on the
platform device to ensure that they are cleaned up during removal.
Fixes: 35c50d853a ("ACPI: fan: Add hwmon support")
Signed-off-by: Armin Wolf <W_Armin@gmx.de>
Cc: 6.11+ <stable@vger.kernel.org> # 6.11+
Link: https://patch.msgid.link/20251007234149.2769-4-W_Armin@gmx.de
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Usage of the ACPI device should be phased out in the future, as
the driver itself is now using the platform bus.
Replace any usage of struct acpi_device in acpi_fan_get_fst() to
allow users to drop usage of struct acpi_device.
Also extend the integer check to all three package elements.
Signed-off-by: Armin Wolf <W_Armin@gmx.de>
Link: https://patch.msgid.link/20251007234149.2769-2-W_Armin@gmx.de
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Some systems, e.g. Rock 4D, have a pluggable UFS module. Link startup
fails systematically on these systems. If no UFS module has been plugged
in, more than fourty lines are logged after the "link startup failed"
message. Avoid this by reducing link startup failure logging.
An intended side effect of this patch is that scsi_host_busy() is not
called before scsi_add_host() is called.
Commit 995412e23b ("blk-mq: Replace tags->lock with SRCU for tag
iterators") introduced a regression - the warning shown below is
triggered during every boot. This patch fixes that regression.
Call trace:
__srcu_read_lock+0x30/0x80 (P)
blk_mq_tagset_busy_iter+0x44/0x300
scsi_host_busy+0x38/0x70
ufshcd_print_host_state+0x34/0x1bc
ufshcd_link_startup.constprop.0+0xe4/0x2e0
ufshcd_init+0x944/0xf80
ufshcd_pltfrm_init+0x504/0x820
ufs_rockchip_probe+0x2c/0x88
platform_probe+0x5c/0xa4
really_probe+0xc0/0x38c
__driver_probe_device+0x7c/0x150
driver_probe_device+0x40/0x120
__driver_attach+0xc8/0x1e0
bus_for_each_dev+0x7c/0xdc
driver_attach+0x24/0x30
bus_add_driver+0x110/0x230
driver_register+0x68/0x130
__platform_driver_register+0x20/0x2c
ufs_rockchip_pltform_init+0x1c/0x28
do_one_initcall+0x60/0x1e0
kernel_init_freeable+0x248/0x2c4
kernel_init+0x20/0x140
ret_from_fork+0x10/0x20
Reported-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Closes: https://lore.kernel.org/linux-block/pnezafputodmqlpumwfbn644ohjybouveehcjhz2hmhtcf2rka@sdhoiivync4y/
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Link: https://patch.msgid.link/20251014200118.3390839-3-bvanassche@acm.org
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
ufs_sysfs_add_nodes() is called concurrently with ufs_get_device_desc().
This may cause the following code to be called before
ufs_sysfs_add_nodes():
sysfs_update_group(&hba->dev->kobj, &ufs_sysfs_hid_group);
If this happens, ufs_sysfs_add_nodes() triggers a kernel warning and
fails. Fix this by calling ufs_sysfs_add_nodes() before SCSI LUNs are
scanned since the sysfs_update_group() call happens from the context of
thread that executes ufshcd_async_scan(). This patch fixes the following
kernel warning:
sysfs: cannot create duplicate filename '/devices/platform/3c2d0000.ufs/hid'
Workqueue: async async_run_entry_fn
Call trace:
dump_backtrace+0xfc/0x17c
show_stack+0x18/0x28
dump_stack_lvl+0x40/0x104
dump_stack+0x18/0x3c
sysfs_warn_dup+0x6c/0xc8
internal_create_group+0x1c8/0x504
sysfs_create_groups+0x38/0x9c
ufs_sysfs_add_nodes+0x20/0x58
ufshcd_init+0x1114/0x134c
ufshcd_pltfrm_init+0x728/0x7d8
ufs_google_probe+0x30/0x84
platform_probe+0xa0/0xe0
really_probe+0x114/0x454
__driver_probe_device+0xa4/0x160
driver_probe_device+0x44/0x23c
__device_attach_driver+0x15c/0x1f4
bus_for_each_drv+0x10c/0x168
__device_attach_async_helper+0x80/0xf8
async_run_entry_fn+0x4c/0x17c
process_one_work+0x26c/0x65c
worker_thread+0x33c/0x498
kthread+0x110/0x134
ret_from_fork+0x10/0x20
ufshcd 3c2d0000.ufs: ufs_sysfs_add_nodes: sysfs groups creation failed (err = -17)
Cc: Daniel Lee <chullee@google.com>
Fixes: bb7663dec6 ("scsi: ufs: sysfs: Make HID attributes visible")
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Link: https://patch.msgid.link/20251014200118.3390839-2-bvanassche@acm.org
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
According to UFS specifications, the power-off sequence for a UFS device
includes:
- Sending an SSU command with Power_Condition=3 and await a response.
- Asserting RST_N low.
- Turning off REF_CLK.
- Turning off VCC.
- Turning off VCCQ/VCCQ2.
As part of ufs shutdown, after the SSU command completion, asserting
hardware reset (HWRST) triggers the device firmware to wake up and
execute its reset routine. This routine initializes hardware blocks and
takes a few milliseconds to complete. During this time, the ICCQ draws a
large current.
This large ICCQ current may cause issues for the regulator which is
supplying power to UFS, because the turn off request from UFS driver to
the regulator framework will be immediately followed by low power
mode(LPM) request by regulator framework. This is done by framework
because UFS which is the only client is requesting for disable. So if
the rail is still in the process of shutting down while ICCQ exceeds LPM
current thresholds, and LPM mode is activated in hardware during this
state, it may trigger an overcurrent protection (OCP) fault in the
regulator.
To prevent this, a 10ms delay is added after asserting HWRST. This
allows the reset operation to complete while power rails remain active
and in high-power mode.
Currently there is no way for Host to query whether the reset is
completed or not and hence this the delay is based on experiments with
Qualcomm UFS controllers across multiple UFS vendors.
Signed-off-by: Nitin Rawat <nitin.rawat@oss.qualcomm.com>
Reviewed-by: Manivannan Sadhasivam <mani@kernel.org>
Link: https://patch.msgid.link/20251012173828.9880-1-nitin.rawat@oss.qualcomm.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
We should wait for the rdma_cm to become SMBDIRECT_SOCKET_DISCONNECTED!
At least on the client side (with similar code)
wait_event_interruptible() often returns with -ERESTARTSYS instead of
waiting for SMBDIRECT_SOCKET_DISCONNECTED.
We should use wait_event() here too, which makes the code be identical
in client and server, which will help when moving to common functions.
Fixes: b31606097d ("smb: server: move smb_direct_disconnect_rdma_work() into free_transport()")
Cc: Steve French <smfrench@gmail.com>
Cc: Tom Talpey <tom@talpey.com>
Cc: linux-cifs@vger.kernel.org
Cc: samba-technical@lists.samba.org
Signed-off-by: Stefan Metzmacher <metze@samba.org>
Acked-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
Daniel Golle says:
====================
net: dsa: lantiq_gswip: use regmap for register access
This series refactors the lantiq_gswip driver to utilize the regmap API
for register access, replacing the previous approach of open-coding
register operations.
Using regmap paves the way for supporting different busses to access the
switch registers, for example it makes it easier to use an MDIO-based
method required to access the registers of the MaxLinear GSW1xx series
of dedicated switch ICs.
Apart from that, the use of regmap improves readability and
maintainability of the driver by standardizing register access.
When ever possible changes were made using Coccinelle semantic patches,
sometimes adjusting white space and adding line breaks when needed.
The remaining changes which were not done using semantic patches are
small and should be easy to review and verify.
The whole series has been
Tested-by: Alexander Sverdlin <alexander.sverdlin@siemens.com>
====================
Link: https://patch.msgid.link/cover.1761045000.git.daniel@makrotopia.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The 'if (!key && hash_location)' check in tcp_inbound_md5_hash() implies
that hash_location might be null. However, later code in the function
dereferences hash_location anyway, without checking for null first.
Fortunately, there is no real bug, since tcp_inbound_md5_hash() is
called only with non-null values of hash_location.
Therefore, remove the unnecessary and misleading null check of
hash_location. This silences a Smatch static checker warning
(https://lore.kernel.org/netdev/aPi4b6aWBbBR52P1@stanley.mountain/)
Also fix the related comment at the beginning of the function.
Signed-off-by: Eric Biggers <ebiggers@kernel.org>
Reviewed-by: Kuniyuki Iwashima <kuniyu@google.com>
Reviewed-by: Dmitry Safonov <0x7f454c46@gmail.com>
Link: https://patch.msgid.link/20251022221209.19716-1-ebiggers@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Commit 620a50c927 ("io_uring: uring_cmd: add multishot support") added
multishot uring_cmd support with explicit buffer upfront commit via
io_uring_mshot_cmd_post_cqe(). However, the buffer selection path in
io_ring_buffer_select() was auto-committing buffers for non-pollable files,
which conflicts with uring_cmd's explicit upfront commit model.
This way consumes the whole selected buffer immediately, and causes
failure on the following buffer selection.
Fix this by checking uring_cmd to identify operations that handle buffer
commit explicitly, and skip auto-commit for these operations.
Cc: Caleb Sander Mateos <csander@purestorage.com>
Fixes: 620a50c927 ("io_uring: uring_cmd: add multishot support")
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
In virtio-net, we have not yet supported multi-buffer XDP packet in
zerocopy mode when there is a binding XDP program. However, in that
case, when receiving multi-buffer XDP packet, we skip the XDP program
and return XDP_PASS. As a result, the packet is passed to normal network
stack which is an incorrect behavior (e.g. a XDP program for packet
count is installed, multi-buffer XDP packet arrives and does go through
XDP program. As a result, the packet count does not increase but the
packet is still received from network stack).This commit instead returns
XDP_ABORTED in that case.
Fixes: 99c861b44e ("virtio_net: xsk: rx: support recv merge mode")
Cc: stable@vger.kernel.org
Acked-by: Jason Wang <jasowang@redhat.com>
Reviewed-by: Xuan Zhuo <xuanzhuo@linux.alibaba.com>
Signed-off-by: Bui Quang Minh <minhquangbui99@gmail.com>
Link: https://patch.msgid.link/20251022155630.49272-1-minhquangbui99@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The root cause of this issue are:
1. When probing the usbnet device, executing usbnet_link_change(dev, 0, 0);
put the kevent work in global workqueue. However, the kevent has not yet
been scheduled when the usbnet device is unregistered. Therefore, executing
free_netdev() results in the "free active object (kevent)" error reported
here.
2. Another factor is that when calling usbnet_disconnect()->unregister_netdev(),
if the usbnet device is up, ndo_stop() is executed to cancel the kevent.
However, because the device is not up, ndo_stop() is not executed.
The solution to this problem is to cancel the kevent before executing
free_netdev().
Fixes: a69e617e53 ("usbnet: Fix linkwatch use-after-free on disconnect")
Reported-by: Sam Sun <samsun1006219@gmail.com>
Closes: https://syzkaller.appspot.com/bug?extid=8bfd7bcc98f7300afb84
Signed-off-by: Lizhi Xu <lizhi.xu@windriver.com>
Link: https://patch.msgid.link/20251022024007.1831898-1-lizhi.xu@windriver.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Remove the long-standing comment in unix_release_sock() that described a
behavioral difference between Linux and BSD regarding when ECONNRESET is
sent to connected UNIX sockets upon closure.
As confirmed by testing on macOS (similar to BSD behavior), ECONNRESET
is only observed for SOCK_DGRAM sockets, not for SOCK_STREAM. Meanwhile,
Linux already returns ECONNRESET in cases where a socket is closed with
unread data or is not yet accept()ed. This means the previous comment no
longer accurately describes current behavior and is misleading.
Suggested-by: Kuniyuki Iwashima <kuniyu@google.com>
Signed-off-by: Sunday Adelodun <adelodunolaoluwa@yahoo.com>
Reviewed-by: Kuniyuki Iwashima <kuniyu@google.com>
Link: https://patch.msgid.link/20251021195906.20389-1-adelodunolaoluwa@yahoo.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Johannes Berg says:
====================
First set of fixes:
- brcmfmac: long-standing crash when used w/o P2P
- iwlwifi: fix for a use-after-free bug
- mac80211: key tailroom accounting bug could leave
allocation overhead and cause a warning
- ath11k: add a missing platform,
fix key flag operations
- bcma: skip devices disabled in OF/DT
- various (potential) memory leaks
* tag 'wireless-2025-10-23' of https://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless:
wifi: nl80211: call kfree without a NULL check
wifi: mac80211: fix key tailroom accounting leak
wifi: brcmfmac: fix crash while sending Action Frames in standalone AP Mode
MAINTAINERS: wcn36xx: Add linux-wireless list
bcma: don't register devices disabled in OF
wifi: mac80211: reset FILS discovery and unsol probe resp intervals
wifi: iwlwifi: fix potential use after free in iwl_mld_remove_link()
wifi: ath11k: avoid bit operation on key flags
wifi: ath12k: free skb during idr cleanup callback
wifi: ath11k: Add missing platform IDs for quirk table
wifi: ath10k: Fix memory leak on unsupported WMI command
====================
Link: https://patch.msgid.link/20251023180604.626946-3-johannes@sipsolutions.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Mark has been kindly helping fill in when I have been unavailable over
the past several years. He has also put his hand up to take over
linux-next maintenance when I finally decide to stop (which may be some
time yet ;-) ).
Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
Acked-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Luiz Augusto von Dentz
Frédéric Danis
Pauli Virtanen
Chris Lu
Cen Zhang
Farhan Ali
Heiko Carstens
Lorenzo Pieralisi
Greg Kroah-Hartman
Simona Vetter
Hao Ge
Mark Brown
Charles Keepax
Marek Szyprowski
Ricardo Ribalda
Hans de Goede
Armin Wolf
Matthew Brost
Bart Van Assche
Nitin Rawat
Stefan Metzmacher
Jakub Kicinski
Daniel Golle
Eric Biggers
Ming Lei
Bjorn Helgaas
Takashi Sakamoto
Bui Quang Minh
Bagas Sanjaya
Lizhi Xu
Sunday Adelodun
Lorenzo Bianconi
Stephen Rothwell