Both mt8195-afe-pcm and mt8365-afe-pcm drivers use devm_pm_runtime_enable()
in probe function, which automatically calls pm_runtime_disable() on device
removal via devres mechanism. However, the remove callbacks explicitly call
pm_runtime_disable() again, resulting in double pm_runtime_disable() calls.
Fix by removing the redundant pm_runtime_disable() calls from remove
functions, letting the devres framework handle it automatically.
Fixes: 2ca0ec01d4 ("ASoC: mediatek: mt8195-afe-pcm: Simplify runtime PM during probe")
Fixes: e1991d102b ("ASoC: mediatek: mt8365: Add the AFE driver support")
Signed-off-by: Haotian Zhang <vulab@iscas.ac.cn>
Link: https://patch.msgid.link/20251020170440.585-1-vulab@iscas.ac.cn
Signed-off-by: Mark Brown <broonie@kernel.org>
Pull tracing fixes from Steven Rostedt:
"A couple of fixes for Runtime Verification:
- A bug caused a kernel panic when reading enabled_monitors was
reported.
Change callback functions to always use list_head iterators and by
doing so, fix the wrong pointer that was leading to the panic.
- The rtapp/pagefault monitor relies on the MMU to be present
(pagefaults exist) but that was not enforced via kconfig, leading
to potential build errors on systems without an MMU.
Add that kconfig dependency"
* tag 'trace-rv-v6.18-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace:
rv: Make rtapp/pagefault monitor depends on CONFIG_MMU
rv: Fully convert enabled_monitors to use list_head as iterator
Masahiro Yamada stepped down as Kbuild and Kconfig maintainer in
commit 8d6841d5cb ("MAINTAINERS: hand over Kbuild maintenance"),
leaving Kconfig officially orphaned and handing Kbuild over to Nicolas
and myself. Since then, there have been a few simple patches to Kconfig
that have ended up on the linux-kbuild mailing list without clear
direction on who will take them, as they are not really sent to anybody
officially, although the list is obviously watched by the Kbuild
maintainers.
Make Nicolas and I official maintainers of Kconfig in "Odd Fixes"
status, similar to Kbuild, so that the subsystem has clear points of
contact for contributors, even if significant contributions may not be
accepted.
Additionally, add the Kbuild tree to this section.
Acked-by: Nicolas Schier <nsc@kernel.org>
Acked-by: Randy Dunlap <rdunlap@infradead.org>
Link: https://patch.msgid.link/20251023-update-kconfig-maintainers-v1-1-0ebd5b4ecced@kernel.org
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
This pull request contains Broadcom ARM64-based SoCs Device Tree fixes
for 6.18, please pull the following:
- Peter describes the VGIC interrupt line such that KVM can be used on
Raspberry Pi 5 systems.
* tag 'arm-soc/for-6.18/devicetree-arm64-fixes' of https://github.com/Broadcom/stblinux:
arm64: dts: broadcom: bcm2712: Define VGIC interrupt
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
This pull request contains Broadcom ARM-based SoCs Device Tree fixes for
6.18, please pull the following:
- Stefan switches the V3D block to use the firmware clock, rather than
the bare metal clock. This fixes hangs on boot after recent changes to
the V3D driver clocking went in.
* tag 'arm-soc/for-6.18/devicetree-fixes' of https://github.com/Broadcom/stblinux:
ARM: dts: broadcom: rpi: Switch to V3D firmware clock
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Arm SCMI fixes for v6.18
This series contains a set of small, focused fixes that address
robustness and lifecycle issues in the Arm SCMI core and debug support,
ensuring safer handling of debug initialization failures, correct flag
management in raw mode, and consistent inflight counter tracking.
Brief summary:
- Fix raw xfer flag clearing
- Skip RAW debug initialization on failure
- Make inflight counter helpers null-safe, preventing crashes if debug
initialization fails
- Account for failed debug initialization globally
There is no functional change for standard SCMI operation, but these
fixes improve stability in debug and raw modes, particularly in error
paths.
* tag 'scmi-fixes-6.18' of git://git.kernel.org/pub/scm/linux/kernel/git/sudeep.holla/linux:
firmware: arm_scmi: Fix premature SCMI_XFER_FLAG_IS_RAW clearing in raw mode
firmware: arm_scmi: Skip RAW initialization on failure
include: trace: Fix inflight count helper on failed initialization
firmware: arm_scmi: Account for failed debug initialization
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Arm FF-A fix for v6.18
The FF-A driver was updated to support specification version 1.2 but omitted
support for the 16-byte implementation-defined (IMPDEF) field introduced in
FF-A v1.2 within the Endpoint Memory Access Descriptor (EMAD). This omission
breaks all memory interfaces.
This change updates the EMAD sizing and offset logic to correctly handle the
FF-A v1.2 layout while preserving backward compatibility with older versions.
* tag 'ffa-fix-6.18' of git://git.kernel.org/pub/scm/linux/kernel/git/sudeep.holla/linux:
firmware: arm_ffa: Add support for IMPDEF value in the memory access descriptor
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Pull arm64 fixes from Catalin Marinas:
- Do not make a clean PTE dirty in pte_mkwrite()
The Arm architecture, for backwards compatibility reasons (ARMv8.0
before in-hardware dirty bit management - DBM), uses the PTE_RDONLY
bit to mean !dirty while the PTE_WRITE bit means DBM enabled. The
arm64 pte_mkwrite() simply clears the PTE_RDONLY bit and this
inadvertently makes the PTE pte_hw_dirty(). Most places making a PTE
writable also invoke pte_mkdirty() but do_swap_page() does not and we
end up with dirty, freshly swapped in, writeable pages.
- Do not warn if the destination page is already MTE-tagged in
copy_highpage()
In the majority of the cases, a destination page copied into is
freshly allocated without the PG_mte_tagged flag set. However, the
folio migration may be restarted if __folio_migrate_mapping() failed,
triggering the benign WARN_ON_ONCE().
* tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux:
arm64: mte: Do not warn if the page is already tagged in copy_highpage()
arm64, mm: avoid always making PTE dirty in pte_mkwrite()
The switch_brightness_work delayed work accesses device->brightness
and device->backlight, freed by acpi_video_dev_unregister_backlight()
during device removal.
If the work executes after acpi_video_bus_unregister_backlight()
frees these resources, it causes a use-after-free when
acpi_video_switch_brightness() dereferences device->brightness or
device->backlight.
Fix this by calling cancel_delayed_work_sync() for each device's
switch_brightness_work in acpi_video_bus_remove_notify_handler()
after removing the notify handler that queues the work. This ensures
the work completes before the memory is freed.
Fixes: 8ab58e8e7e ("ACPI / video: Fix backlight taking 2 steps on a brightness up/down keypress")
Cc: All applicable <stable@vger.kernel.org>
Signed-off-by: Yuhao Jiang <danisjiang@gmail.com>
Reviewed-by: Hans de Goede <hansg@kernel.org>
[ rjw: Changelog edit ]
Link: https://patch.msgid.link/20251022200704.2655507-1-danisjiang@gmail.com
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Pull networking fixes from Jakub Kicinski:
"Including fixes from can. Slim pickings, I'm guessing people haven't
really started testing.
Current release - new code bugs:
- eth: mlx5e:
- psp: avoid 'accel' NULL pointer dereference
- skip PPHCR register query for FEC histogram if not supported
Previous releases - regressions:
- bonding: update the slave array for broadcast mode
- rtnetlink: re-allow deleting FDB entries in user namespace
- eth: dpaa2: fix the pointer passed to PTR_ALIGN on Tx path
Previous releases - always broken:
- can: drop skb on xmit if device is in listen-only mode
- gro: clear skb_shinfo(skb)->hwtstamps in napi_reuse_skb()
- eth: mlx5e
- RX, fix generating skb from non-linear xdp_buff if program
trims frags
- make devcom init failures non-fatal, fix races with IPSec
Misc:
- some documentation formatting 'fixes'"
* tag 'net-6.18-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (47 commits)
net/mlx5: Fix IPsec cleanup over MPV device
net/mlx5: Refactor devcom to return NULL on failure
net/mlx5e: Skip PPHCR register query if not supported by the device
net/mlx5: Add PPHCR to PCAM supported registers mask
virtio-net: zero unused hash fields
net: phy: micrel: always set shared->phydev for LAN8814
vsock: fix lock inversion in vsock_assign_transport()
ovpn: use datagram_poll_queue for socket readiness in TCP
espintcp: use datagram_poll_queue for socket readiness
net: datagram: introduce datagram_poll_queue for custom receive queues
net: bonding: fix possible peer notify event loss or dup issue
net: hsr: prevent creation of HSR device with slaves from another netns
sctp: avoid NULL dereference when chunk data buffer is missing
ptp: ocp: Fix typo using index 1 instead of i in SMA initialization loop
net: ravb: Ensure memory write completes before ringing TX doorbell
net: ravb: Enforce descriptor type ordering
net: hibmcge: select FIXED_PHY
net: dlink: use dev_kfree_skb_any instead of dev_kfree_skb
Documentation: networking: ax25: update the mailing list info.
net: gro_cells: fix lock imbalance in gro_cells_receive()
...
Pull ACPI fixes from Rafael Wysocki:
"These fix a fallout of a recent ACPI properties management update and
work around a compiler bug in ACPICA:
- Fix a recent coding mistake causing __acpi_node_get_property_reference()
arguments to be put in an incorrect order (Sunil V L)
- Work around bogus -Wstringop-overread warning on LoongArch since
GCC 11 in ACPICA (Xi Ruoyao)"
* tag 'acpi-6.18-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
ACPICA: Work around bogus -Wstringop-overread warning since GCC 11
ACPI: property: Fix argument order in __acpi_node_get_property_reference()
Pull power management fixes from Rafael Wysocki:
"These revert a cpuidle menu governor commit leading to a performance
regression, fix an amd-pstate driver regression introduced recently,
and fix new conditional guard definitions for runtime PM.
- Add missing _RET == 0 condition to recently introduced conditional
guard definitions for runtime PM (Rafael Wysocki)
- Revert a cpuidle menu governor change that introduced a serious
performance regression on Chromebooks with Intel Jasper Lake
processors (Rafael Wysocki)
- Fix an amd-pstate driver regression leading to EPP=0 after
hibernation (Mario Limonciello)"
* tag 'pm-6.18-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
PM: runtime: Fix conditional guard definitions
Revert "cpuidle: menu: Avoid discarding useful information"
cpufreq/amd-pstate: Fix a regression leading to EPP 0 after hibernate
Pull btrfs fixes from David Sterba:
- in send, fix duplicated rmdir operations when using extrefs
(hardlinks), receive can fail with ENOENT
- fixup of error check when reading extent root in ref-verify and
damaged roots are allowed by mount option (found by smatch)
- fix freeing partially initialized fs info (found by syzkaller)
- fix use-after-free when printing ref_tracking status of delayed
inodes
* tag 'for-6.18-rc2-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux:
btrfs: ref-verify: fix IS_ERR() vs NULL check in btrfs_build_ref_tree()
btrfs: fix delayed_node ref_tracker use after free
btrfs: send: fix duplicated rmdir operations when using extrefs
btrfs: directly free partially initialized fs_info in btrfs_check_leaked_roots()
Since commit af92793e52 ("slab: Introduce kmalloc_nolock() and
kfree_nolock().") there's a possibility in alloc_single_from_new_slab()
that we discard the newly allocated slab if we can't spin and we fail to
trylock. As a result we don't perform inc_slabs_node() later in the
function. Instead we perform a deferred deactivate_slab() which can
either put the unacounted slab on partial list, or discard it
immediately while performing dec_slabs_node(). Either way will cause an
accounting imbalance.
Fix this by not marking the slab as frozen, and using free_slab()
instead of deactivate_slab() for non-frozen slabs in
free_deferred_objects(). For CONFIG_SLUB_TINY, that's the only possible
case. By not using discard_slab() we avoid dec_slabs_node().
Fixes: af92793e52 ("slab: Introduce kmalloc_nolock() and kfree_nolock().")
Link: https://patch.msgid.link/20251023-fix-slab-accounting-v2-1-0e62d50986ea@suse.cz
Reviewed-by: Harry Yoo <harry.yoo@oracle.com>
Signed-off-by: Vlastimil Babka <vbabka@suse.cz>
Commit 4e65bda827 ("ASoC: wcd934x: fix error handling in
wcd934x_codec_parse_data()") revealed the problem in the slimbus regmap.
That commit breaks audio playback, for instance, on sdm845 Thundercomm
Dragonboard 845c board:
Unable to handle kernel paging request at virtual address ffff8000847cbad4
...
CPU: 5 UID: 0 PID: 776 Comm: aplay Not tainted 6.18.0-rc1-00028-g7ea30958b305 #11 PREEMPT
Hardware name: Thundercomm Dragonboard 845c (DT)
...
Call trace:
slim_xfer_msg+0x24/0x1ac [slimbus] (P)
slim_read+0x48/0x74 [slimbus]
regmap_slimbus_read+0x18/0x24 [regmap_slimbus]
_regmap_raw_read+0xe8/0x174
_regmap_bus_read+0x44/0x80
_regmap_read+0x60/0xd8
_regmap_update_bits+0xf4/0x140
_regmap_select_page+0xa8/0x124
_regmap_raw_write_impl+0x3b8/0x65c
_regmap_bus_raw_write+0x60/0x80
_regmap_write+0x58/0xc0
regmap_write+0x4c/0x80
wcd934x_hw_params+0x494/0x8b8 [snd_soc_wcd934x]
snd_soc_dai_hw_params+0x3c/0x7c [snd_soc_core]
__soc_pcm_hw_params+0x22c/0x634 [snd_soc_core]
dpcm_be_dai_hw_params+0x1d4/0x38c [snd_soc_core]
dpcm_fe_dai_hw_params+0x9c/0x17c [snd_soc_core]
snd_pcm_hw_params+0x124/0x464 [snd_pcm]
snd_pcm_common_ioctl+0x110c/0x1820 [snd_pcm]
snd_pcm_ioctl+0x34/0x4c [snd_pcm]
__arm64_sys_ioctl+0xac/0x104
invoke_syscall+0x48/0x104
el0_svc_common.constprop.0+0x40/0xe0
do_el0_svc+0x1c/0x28
el0_svc+0x34/0xec
el0t_64_sync_handler+0xa0/0xf0
el0t_64_sync+0x198/0x19c
The __devm_regmap_init_slimbus() started to be used instead of
__regmap_init_slimbus() after the commit mentioned above and turns out
the incorrect bus_context pointer (3rd argument) was used in
__devm_regmap_init_slimbus(). It should be just "slimbus" (which is equal
to &slimbus->dev). Correct it. The wcd934x codec seems to be the only or
the first user of devm_regmap_init_slimbus() but we should fix it till
the point where __devm_regmap_init_slimbus() was introduced therefore
two "Fixes" tags.
While at this, also correct the same argument in __regmap_init_slimbus().
Fixes: 4e65bda827 ("ASoC: wcd934x: fix error handling in wcd934x_codec_parse_data()")
Fixes: 7d6f7fb053 ("regmap: add SLIMbus support")
Cc: stable@vger.kernel.org
Cc: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Cc: Ma Ke <make24@iscas.ac.cn>
Cc: Steev Klimaszewski <steev@kali.org>
Cc: Srinivas Kandagatla <srini@kernel.org>
Reviewed-by: Abel Vesa <abel.vesa@linaro.org>
Signed-off-by: Alexey Klimov <alexey.klimov@linaro.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Link: https://patch.msgid.link/20251022201013.1740211-1-alexey.klimov@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Currently, during the LAN8814 PTP probe shared->phydev is only set if PTP
clock gets actually set, otherwise the function will return before setting
it.
This is an issue as shared->phydev is unconditionally being used when IRQ
is being handled, especially in lan8814_gpio_process_cap and since it was
not set it will cause a NULL pointer exception and crash the kernel.
So, simply always set shared->phydev to avoid the NULL pointer exception.
Fixes: b3f1a08fcf ("net: phy: micrel: Add support for PTP_PF_EXTTS for lan8814")
Signed-off-by: Robert Marko <robert.marko@sartura.hr>
Tested-by: Horatiu Vultur <horatiu.vultur@microchip.com>
Link: https://patch.msgid.link/20251021132034.983936-1-robert.marko@sartura.hr
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Do not block PCI config accesses through pci_cfg_access_lock() when
executing the s390 variant of PCI error recovery: Acquire just
device_lock() instead of pci_dev_lock() as powerpc's EEH and
generig PCI AER processing do.
During error recovery testing a pair of tasks was reported to be hung:
mlx5_core 0000:00:00.1: mlx5_health_try_recover:338:(pid 5553): health recovery flow aborted, PCI reads still not working
INFO: task kmcheck:72 blocked for more than 122 seconds.
Not tainted 5.14.0-570.12.1.bringup7.el9.s390x #1
"echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
task:kmcheck state:D stack:0 pid:72 tgid:72 ppid:2 flags:0x00000000
Call Trace:
[<000000065256f030>] __schedule+0x2a0/0x590
[<000000065256f356>] schedule+0x36/0xe0
[<000000065256f572>] schedule_preempt_disabled+0x22/0x30
[<0000000652570a94>] __mutex_lock.constprop.0+0x484/0x8a8
[<000003ff800673a4>] mlx5_unload_one+0x34/0x58 [mlx5_core]
[<000003ff8006745c>] mlx5_pci_err_detected+0x94/0x140 [mlx5_core]
[<0000000652556c5a>] zpci_event_attempt_error_recovery+0xf2/0x398
[<0000000651b9184a>] __zpci_event_error+0x23a/0x2c0
INFO: task kworker/u1664:6:1514 blocked for more than 122 seconds.
Not tainted 5.14.0-570.12.1.bringup7.el9.s390x #1
"echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
task:kworker/u1664:6 state:D stack:0 pid:1514 tgid:1514 ppid:2 flags:0x00000000
Workqueue: mlx5_health0000:00:00.0 mlx5_fw_fatal_reporter_err_work [mlx5_core]
Call Trace:
[<000000065256f030>] __schedule+0x2a0/0x590
[<000000065256f356>] schedule+0x36/0xe0
[<0000000652172e28>] pci_wait_cfg+0x80/0xe8
[<0000000652172f94>] pci_cfg_access_lock+0x74/0x88
[<000003ff800916b6>] mlx5_vsc_gw_lock+0x36/0x178 [mlx5_core]
[<000003ff80098824>] mlx5_crdump_collect+0x34/0x1c8 [mlx5_core]
[<000003ff80074b62>] mlx5_fw_fatal_reporter_dump+0x6a/0xe8 [mlx5_core]
[<0000000652512242>] devlink_health_do_dump.part.0+0x82/0x168
[<0000000652513212>] devlink_health_report+0x19a/0x230
[<000003ff80075a12>] mlx5_fw_fatal_reporter_err_work+0xba/0x1b0 [mlx5_core]
No kernel log of the exact same error with an upstream kernel is
available - but the very same deadlock situation can be constructed there,
too:
- task: kmcheck
mlx5_unload_one() tries to acquire devlink lock while the PCI error
recovery code has set pdev->block_cfg_access by way of
pci_cfg_access_lock()
- task: kworker
mlx5_crdump_collect() tries to set block_cfg_access through
pci_cfg_access_lock() while devlink_health_report() had acquired
the devlink lock.
A similar deadlock situation can be reproduced by requesting a
crdump with
> devlink health dump show pci/<BDF> reporter fw_fatal
while PCI error recovery is executed on the same <BDF> physical function
by mlx5_core's pci_error_handlers. On s390 this can be injected with
> zpcictl --reset-fw <BDF>
Tests with this patch failed to reproduce that second deadlock situation,
the devlink command is rejected with "kernel answers: Permission denied" -
and we get a kernel log message of:
mlx5_core 1ed0:00:00.1: mlx5_crdump_collect:50:(pid 254382): crdump: failed to lock vsc gw err -5
because the config read of VSC_SEMAPHORE is rejected by the underlying
hardware.
Two prior attempts to address this issue have been discussed and
ultimately rejected [see link], with the primary argument that s390's
implementation of PCI error recovery is imposing restrictions that
neither powerpc's EEH nor PCI AER handling need. Tests show that PCI
error recovery on s390 is running to completion even without blocking
access to PCI config space.
Link: https://lore.kernel.org/all/20251007144826.2825134-1-gbayer@linux.ibm.com/
Cc: stable@vger.kernel.org
Fixes: 4cdf2f4e24 ("s390/pci: implement minimal PCI error recovery")
Reviewed-by: Niklas Schnelle <schnelle@linux.ibm.com>
Signed-off-by: Gerd Bayer <gbayer@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Syzbot reported a potential lock inversion deadlock between
vsock_register_mutex and sk_lock-AF_VSOCK when vsock_linger() is called.
The issue was introduced by commit 687aa0c558 ("vsock: Fix
transport_* TOCTOU") which added vsock_register_mutex locking in
vsock_assign_transport() around the transport->release() call, that can
call vsock_linger(). vsock_assign_transport() can be called with sk_lock
held. vsock_linger() calls sk_wait_event() that temporarily releases and
re-acquires sk_lock. During this window, if another thread hold
vsock_register_mutex while trying to acquire sk_lock, a circular
dependency is created.
Fix this by releasing vsock_register_mutex before calling
transport->release() and vsock_deassign_transport(). This is safe
because we don't need to hold vsock_register_mutex while releasing the
old transport, and we ensure the new transport won't disappear by
obtaining a module reference first via try_module_get().
Reported-by: syzbot+10e35716f8e4929681fa@syzkaller.appspotmail.com
Tested-by: syzbot+10e35716f8e4929681fa@syzkaller.appspotmail.com
Fixes: 687aa0c558 ("vsock: Fix transport_* TOCTOU")
Cc: mhal@rbox.co
Cc: stable@vger.kernel.org
Signed-off-by: Stefano Garzarella <sgarzare@redhat.com>
Link: https://patch.msgid.link/20251021121718.137668-1-sgarzare@redhat.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
In ath11k_wmi_send_peer_assoc_cmd(), peer's transmit MCS is sent to
firmware as receive MCS while peer's receive MCS sent as transmit MCS,
which goes against firmwire's definition.
While connecting to a misbehaved AP that advertises 0xffff (meaning not
supported) for 160 MHz transmit MCS map, firmware crashes due to 0xffff
is assigned to he_mcs->rx_mcs_set field.
Ext Tag: HE Capabilities
[...]
Supported HE-MCS and NSS Set
[...]
Rx and Tx MCS Maps 160 MHz
[...]
Tx HE-MCS Map 160 MHz: 0xffff
Swap the assignment to fix this issue.
As the HE rate control mask is meant to limit our own transmit MCS, it
needs to go via he_mcs->rx_mcs_set field. With the aforementioned swapping
done, change is needed as well to apply it to the peer's receive MCS.
Tested-on: WCN6855 hw2.1 PCI WLAN.HSP.1.1-03125-QCAHSPSWPL_V1_V2_SILICONZ_LITE-3.6510.41
Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.4.1-00199-QCAHKSWPL_SILICONZ-1
Fixes: 61fe43e721 ("ath11k: add support for setting fixed HE rate/gi/ltf")
Signed-off-by: Baochen Qiang <baochen.qiang@oss.qualcomm.com>
Reviewed-by: Vasanthakumar Thiagarajan <vasanthakumar.thiagarajan@oss.qualcomm.com>
Link: https://patch.msgid.link/20251017-ath11k-mcs-assignment-v1-2-da40825c1783@oss.qualcomm.com
Signed-off-by: Jeff Johnson <jeff.johnson@oss.qualcomm.com>
While associating, firmware needs to know peer's receive capability to
calculate its own VHT transmit MCS, currently host sends this information
to firmware via mcs->rx_mcs_set field, this is wrong as firmware actually
takes it from mcs->tx_mcs_set field. Till now there is no failure seen
due to this, most likely because almost all peers are advertising the
same capability for both transmit and receive. Swap the assignment to
fix it.
Besides, rate control mask is meant to limit our own transmit MCS, hence
need to go via mcs->tx_mcs_set field. With the aforementioned swapping
done, change is needed as well to apply it to the peer's receive
capability rather than transmit capability.
Tested-on: WCN6855 hw2.1 PCI WLAN.HSP.1.1-03125-QCAHSPSWPL_V1_V2_SILICONZ_LITE-3.6510.41
Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.4.1-00199-QCAHKSWPL_SILICONZ-1
Fixes: d5c65159f2 ("ath11k: driver for Qualcomm IEEE 802.11ax devices")
Signed-off-by: Baochen Qiang <baochen.qiang@oss.qualcomm.com>
Reviewed-by: Vasanthakumar Thiagarajan <vasanthakumar.thiagarajan@oss.qualcomm.com>
Link: https://patch.msgid.link/20251017-ath11k-mcs-assignment-v1-1-da40825c1783@oss.qualcomm.com
Signed-off-by: Jeff Johnson <jeff.johnson@oss.qualcomm.com>
Ralf Lici says:
====================
fix poll behaviour for TCP-based tunnel protocols
This patch series introduces a polling function for datagram-style
sockets that operates on custom skb queues, and updates ovpn (the
OpenVPN data-channel offload module) and espintcp (the TCP Encapsulation
of IKE and IPsec Packets implementation) to use it accordingly.
Protocols like the aforementioned one decapsulate packets received over
TCP and deliver userspace-bound data through a separate skb queue, not
the standard sk_receive_queue. Previously, both relied on
datagram_poll(), which would signal readiness based on non-userspace
packets, leading to misleading poll results and unnecessary recv
attempts in userspace.
Patch 1 introduces datagram_poll_queue(), a variant of datagram_poll()
that accepts an explicit receive queue. This builds on the approach
introduced in commit b50b058, which extended other skb-related functions
to support custom queues. Patch 2 and 3 update espintcp_poll() and
ovpn_tcp_poll() respectively to use this helper, ensuring readiness is
only signaled when userspace data is available.
Each patch is self-contained and the ovpn one includes rationale and
lifecycle enforcement where appropriate.
====================
Link: https://patch.msgid.link/20251021100942.195010-1-ralf@mandelbit.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
openvpn TCP encapsulation uses a custom queue to deliver packets to
userspace. Currently it relies on datagram_poll, which checks
sk_receive_queue, leading to false readiness signals when that queue
contains non-userspace packets.
Switch ovpn_tcp_poll to use datagram_poll_queue with the peer's
user_queue, ensuring poll only signals readiness when userspace data is
actually available. Also refactor ovpn_tcp_poll in order to enforce the
assumption we can make on the lifetime of ovpn_sock and peer.
Fixes: 11851cbd60 ("ovpn: implement TCP transport")
Signed-off-by: Antonio Quartulli <antonio@openvpn.net>
Signed-off-by: Ralf Lici <ralf@mandelbit.com>
Reviewed-by: Sabrina Dubroca <sd@queasysnail.net>
Link: https://patch.msgid.link/20251021100942.195010-4-ralf@mandelbit.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
espintcp uses a custom queue (ike_queue) to deliver packets to
userspace. The polling logic relies on datagram_poll, which checks
sk_receive_queue, which can lead to false readiness signals when that
queue contains non-userspace packets.
Switch espintcp_poll to use datagram_poll_queue with ike_queue, ensuring
poll only signals readiness when userspace data is actually available.
Fixes: e27cca96cd ("xfrm: add espintcp (RFC 8229)")
Signed-off-by: Ralf Lici <ralf@mandelbit.com>
Reviewed-by: Sabrina Dubroca <sd@queasysnail.net>
Link: https://patch.msgid.link/20251021100942.195010-3-ralf@mandelbit.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Some protocols using TCP encapsulation (e.g., espintcp, openvpn) deliver
userspace-bound packets through a custom skb queue rather than the
standard sk_receive_queue.
Introduce datagram_poll_queue that accepts an explicit receive queue,
and convert datagram_poll into a wrapper around datagram_poll_queue.
This allows protocols with custom skb queues to reuse the core polling
logic without relying on sk_receive_queue.
Cc: Sabrina Dubroca <sd@queasysnail.net>
Cc: Antonio Quartulli <antonio@openvpn.net>
Signed-off-by: Ralf Lici <ralf@mandelbit.com>
Reviewed-by: Sabrina Dubroca <sd@queasysnail.net>
Reviewed-by: Antonio Quartulli <antonio@openvpn.net>
Link: https://patch.msgid.link/20251021100942.195010-2-ralf@mandelbit.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
The __must_hold annotation references &req->ctx->uring_lock, but req
is not in scope in io_install_fixed_file. This change updates the
annotation to reference the correct ctx->uring_lock.
improving code clarity.
Fixes: f110ed8498 ("io_uring: split out fixed file installation and removal")
Signed-off-by: Alok Tiwari <alok.a.tiwari@oracle.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
The data probing is a debug feature. Currently parameters channels and
rate specified by the application are read while the format is ignored.
More robust approach is to read all of them.
Audio format, while not used by the Probe module for PCM streaming,
takes part in the gateway initialization on the DSP side. With full
parametrization we gain better coverage with the data probing feature.
Signed-off-by: Cezary Rojewski <cezary.rojewski@intel.com>
Link: https://patch.msgid.link/20251023092348.3119313-4-cezary.rojewski@intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
avs_dai_fe_shutdown() handles the shutdown procedure for HOST HDAudio
stream while period-elapsed work services its IRQs. As the former
frees the DAI's private context, these two operations shall be
synchronized to avoid slab-use-after-free or worse errors.
Fixes: 0dbb186c35 ("ASoC: Intel: avs: Update stream status in a separate thread")
Signed-off-by: Cezary Rojewski <cezary.rojewski@intel.com>
Link: https://patch.msgid.link/20251023092348.3119313-3-cezary.rojewski@intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The pcm->prepare() function may be called multiple times in a row by the
userspace, as mentioned in the documentation. The driver shall take that
into account and prevent redundancy. However, the exact same function is
called during XRUNs and in such case, the particular stream shall be
reset and setup anew.
Fixes: 9114700b49 ("ASoC: Intel: avs: Generic PCM FE operations")
Signed-off-by: Cezary Rojewski <cezary.rojewski@intel.com>
Link: https://patch.msgid.link/20251023092348.3119313-2-cezary.rojewski@intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The generic_handle_domain_irq() function resolves the hardware IRQ
internally. The driver performed a duplicative mapping by calling
irq_find_mapping() first, which could lead to an RCU stall.
Delete the redundant irq_find_mapping() call and pass the hardware IRQ
directly to generic_handle_domain_irq().
Fixes: c5a4b6fd31 ("gpio: Add support for Intel LJCA USB GPIO driver")
Signed-off-by: Haotian Zhang <vulab@iscas.ac.cn>
Link: https://lore.kernel.org/r/20251023070231.1305-1-vulab@iscas.ac.cn
[Bartosz: remove unused variable]
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Merge an ACPI device properties handling change fixing the order of
__acpi_node_get_property_reference() arguments broken by a recent
update (Sunil V L)
* 'acpi-property':
ACPI: property: Fix argument order in __acpi_node_get_property_reference()
Merge cpuidle and cpufreq fixes for 6.18-rc3:
- Revert a cpuidle menu governor change that introduced a serious
performance regression on Chromebooks with Intel Jasper Lake
processors (Rafael Wysocki)
- Fix an amd-pstate driver regression leading to EPP=0 after
hibernation (Mario Limonciello)
* pm-cpuidle:
Revert "cpuidle: menu: Avoid discarding useful information"
* pm-cpufreq:
cpufreq/amd-pstate: Fix a regression leading to EPP 0 after hibernate
If the send_peer_notif counter and the peer event notify are not synchronized.
It may cause problems such as the loss or dup of peer notify event.
Before this patch:
- If should_notify_peers is true and the lock for send_peer_notif-- fails, peer
event may be sent again in next mii_monitor loop, because should_notify_peers
is still true.
- If should_notify_peers is true and the lock for send_peer_notif-- succeeded,
but the lock for peer event fails, the peer event will be lost.
This patch locks the RTNL for send_peer_notif, events, and commit simultaneously.
Fixes: 07a4ddec3c ("bonding: add an option to specify a delay between peer notifications")
Cc: Jay Vosburgh <jv@jvosburgh.net>
Cc: Andrew Lunn <andrew+netdev@lunn.ch>
Cc: Eric Dumazet <edumazet@google.com>
Cc: Jakub Kicinski <kuba@kernel.org>
Cc: Paolo Abeni <pabeni@redhat.com>
Cc: Hangbin Liu <liuhangbin@gmail.com>
Cc: Nikolay Aleksandrov <razor@blackwall.org>
Cc: Vincent Bernat <vincent@bernat.ch>
Cc: <stable@vger.kernel.org>
Signed-off-by: Tonghao Zhang <tonghao@bamaicloud.com>
Acked-by: Jay Vosburgh <jv@jvosburgh.net>
Link: https://patch.msgid.link/20251021050933.46412-1-tonghao@bamaicloud.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Haotian Zhang
Linus Torvalds
Nathan Chancellor
Arnd Bergmann
Yuhao Jiang
Andrii Nakryiko
Jakub Kicinski
Jeff Johnson
Catalin Marinas
Vlastimil Babka
Alexey Klimov
Patrisious Haddad
Alexei Lazar
Jason Wang
Robert Marko
Gerd Bayer
Stefano Garzarella
Aditya Kumar Singh
Baochen Qiang
Paolo Abeni
Ralf Lici
Alok Tiwari
Shengjiu Wang
Cezary Rojewski
LI Qingwu
Rafael J. Wysocki
Horatiu Vultur
Tonghao Zhang