In dw_hdmi_rk3228_setup_hpd(), the SCLIN mask incorrectly references
the RK3328 variant. This change updates it to the RK3228-specific mask
RK3228_HDMI_SCLIN_MSK using FIELD_PREP_WM16, ensuring proper HPD and
I2C pin configuration for RK3228.
Change: RK3328_HDMI_SCLIN_MSK -> RK3228_HDMI_SCLIN_MSK
Fixes: 63df37f3fc ("drm/rockchip: dw_hdmi: switch to FIELD_PREP_WM16* macros")
Signed-off-by: Alok Tiwari <alok.a.tiwari@oracle.com>
Reviewed-by: Nicolas Frattaroli <nicolas.frattaroli@collabora.com>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Link: https://lore.kernel.org/r/20251010173143.72733-1-alok.a.tiwari@oracle.com
To adapt to new firmware for AML devices, the driver should send the
"SET_LINK_CMD" to the firmware only once when switching PHY interface
mode, and no longer needs to re-trigger PHY configuration based on the
RX signal interrupt (TXGBE_GPIOBIT_3).
In previous firmware versions, the PHY was configured only after receiving
"SET_LINK_CMD", and might remain incomplete if the RX signal was lost.
To handle this case, the driver used TXGBE_GPIOBIT_3 interrupt to resend
the command. This workaround is no longer necessary with the new firmware.
And the unknown link speed is permitted in the mailbox buffer.
Signed-off-by: Jiawen Wu <jiawenwu@trustnetic.com>
Link: https://patch.msgid.link/20251014061726.36660-3-jiawenwu@trustnetic.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Recent firmware updates introduce additional fields in the mailbox message
to provide more information for identifying 40G and 100G QSFP modules.
To accommodate these new fields, expand the mailbox buffer size by 4 bytes.
Without this change, drivers built against the updated firmware cannot
properly identify modules due to mismatched mailbox message lengths.
The old firmware version that used the smaller mailbox buffer has never
been publicly released, so there are no backward-compatibility concerns.
Signed-off-by: Jiawen Wu <jiawenwu@trustnetic.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://patch.msgid.link/20251014061726.36660-2-jiawenwu@trustnetic.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Attaching UBI on the flash with more than one plane per lun will lead to
the following error:
[ 2.980989] spi-nand spi0.0: Micron SPI NAND was found.
[ 2.986309] spi-nand spi0.0: 256 MiB, block size: 128 KiB, page size: 2048, OOB size: 128
[ 2.994978] 2 fixed-partitions partitions found on MTD device spi0.0
[ 3.001350] Creating 2 MTD partitions on "spi0.0":
[ 3.006159] 0x000000000000-0x000000020000 : "bl2"
[ 3.011663] 0x000000020000-0x000010000000 : "ubi"
...
[ 6.391748] ubi0: attaching mtd1
[ 6.412545] ubi0 error: ubi_attach: PEB 0 contains corrupted VID header, and the data does not contain all 0xFF
[ 6.422677] ubi0 error: ubi_attach: this may be a non-UBI PEB or a severe VID header corruption which requires manual inspection
[ 6.434249] Volume identifier header dump:
[ 6.438349] magic 55424923
[ 6.441482] version 1
[ 6.444007] vol_type 0
[ 6.446539] copy_flag 0
[ 6.449068] compat 0
[ 6.451594] vol_id 0
[ 6.454120] lnum 1
[ 6.456651] data_size 4096
[ 6.459442] used_ebs 1061644134
[ 6.462748] data_pad 0
[ 6.465274] sqnum 0
[ 6.467805] hdr_crc 61169820
[ 6.470943] Volume identifier header hexdump:
[ 6.475308] hexdump of PEB 0 offset 4096, length 126976
[ 6.507391] ubi0 warning: ubi_attach: valid VID header but corrupted EC header at PEB 4
[ 6.515415] ubi0 error: ubi_compare_lebs: unsupported on-flash UBI format
[ 6.522222] ubi0 error: ubi_attach_mtd_dev: failed to attach mtd1, error -22
[ 6.529294] UBI error: cannot attach mtd1
Non dirmap reading works good. Looking to spi_mem_no_dirmap_read() code we'll see:
static ssize_t spi_mem_no_dirmap_read(struct spi_mem_dirmap_desc *desc,
u64 offs, size_t len, void *buf)
{
struct spi_mem_op op = desc->info.op_tmpl;
int ret;
// --- see here ---
op.addr.val = desc->info.offset + offs;
//-----------------
op.data.buf.in = buf;
op.data.nbytes = len;
ret = spi_mem_adjust_op_size(desc->mem, &op);
if (ret)
return ret;
ret = spi_mem_exec_op(desc->mem, &op);
if (ret)
return ret;
return op.data.nbytes;
}
The similar happens for spi_mem_no_dirmap_write(). Thus the address
passed to the flash should take in the account the value of
desc->info.offset.
This patch fix dirmap reading/writing of flashes with more than one
plane per lun.
Fixes: a403997c12 ("spi: airoha: add SPI-NAND Flash controller driver")
Signed-off-by: Mikhail Kshevetskiy <mikhail.kshevetskiy@iopsys.eu>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://patch.msgid.link/20251012121707.2296160-7-mikhail.kshevetskiy@iopsys.eu
Signed-off-by: Mark Brown <broonie@kernel.org>
Booting without this patch and disabled dirmap support results in
[ 2.980719] spi-nand spi0.0: Micron SPI NAND was found.
[ 2.986040] spi-nand spi0.0: 256 MiB, block size: 128 KiB, page size: 2048, OOB size: 128
[ 2.994709] 2 fixed-partitions partitions found on MTD device spi0.0
[ 3.001075] Creating 2 MTD partitions on "spi0.0":
[ 3.005862] 0x000000000000-0x000000020000 : "bl2"
[ 3.011272] 0x000000020000-0x000010000000 : "ubi"
...
[ 6.195594] ubi0: attaching mtd1
[ 13.338398] ubi0: scanning is finished
[ 13.342188] ubi0 error: ubi_read_volume_table: the layout volume was not found
[ 13.349784] ubi0 error: ubi_attach_mtd_dev: failed to attach mtd1, error -22
[ 13.356897] UBI error: cannot attach mtd1
If dirmap is disabled or not supported in the spi driver, the dirmap requests
will be executed via exec_op() handler. Thus, if the hardware supports
dual/quad spi modes, then corresponding requests will be sent to exec_op()
handler. Current driver does not support such requests, so error is arrised.
As result the flash can't be read/write.
This patch adds support of dual and quad wires spi modes to exec_op() handler.
Fixes: a403997c12 ("spi: airoha: add SPI-NAND Flash controller driver")
Signed-off-by: Mikhail Kshevetskiy <mikhail.kshevetskiy@iopsys.eu>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://patch.msgid.link/20251012121707.2296160-4-mikhail.kshevetskiy@iopsys.eu
Signed-off-by: Mark Brown <broonie@kernel.org>
If obj_exts allocation failed, slab->obj_exts is set to OBJEXTS_ALLOC_FAIL,
But we do not clear it when freeing the slab. Since OBJEXTS_ALLOC_FAIL and
MEMCG_DATA_OBJEXTS currently share the same bit position, during the
release of the associated folio, a VM_BUG_ON_FOLIO() check in
folio_memcg_kmem() is triggered because the OBJEXTS_ALLOC_FAIL flag was
not cleared, causing it to be interpreted as a kmem folio (non-slab)
with MEMCG_OBJEXTS_DATA flag set, which is invalid because
MEMCG_OBJEXTS_DATA is supposed to be set only on slabs.
Another problem that predates sharing the OBJEXTS_ALLOC_FAIL and
MEMCG_DATA_OBJEXTS bits is that on configurations with
is_check_pages_enabled(), the non-cleared bit in page->memcg_data will
trigger a free_page_is_bad() failure "page still charged to cgroup"
When freeing a slab, we clear slab->obj_exts if the obj_ext array has
been successfully allocated. So let's clear it also when the allocation
has failed.
Fixes: 09c46563ff ("codetag: debug: introduce OBJEXTS_ALLOC_FAIL to mark failed slab_ext allocations")
Fixes: 7612833192 ("slab: Reuse first bit for OBJEXTS_ALLOC_FAIL")
Link: https://lore.kernel.org/all/20251015141642.700170-1-hao.ge@linux.dev/
Cc: <stable@vger.kernel.org>
Signed-off-by: Hao Ge <gehao@kylinos.cn>
Reviewed-by: Suren Baghdasaryan <surenb@google.com>
Reviewed-by: Harry Yoo <harry.yoo@oracle.com>
Signed-off-by: Vlastimil Babka <vbabka@suse.cz>
When adding dependencies with drm_sched_job_add_dependency(), that
function consumes the fence reference both on success and failure, so in
the latter case the dma_fence_put() on the error path (xarray failed to
expand) is a double free.
Interestingly this bug appears to have been present ever since
commit ebd5f74255 ("drm/sched: Add dependency tracking"), since the code
back then looked like this:
drm_sched_job_add_implicit_dependencies():
...
for (i = 0; i < fence_count; i++) {
ret = drm_sched_job_add_dependency(job, fences[i]);
if (ret)
break;
}
for (; i < fence_count; i++)
dma_fence_put(fences[i]);
Which means for the failing 'i' the dma_fence_put was already a double
free. Possibly there were no users at that time, or the test cases were
insufficient to hit it.
The bug was then only noticed and fixed after
commit 9c2ba26535 ("drm/scheduler: use new iterator in drm_sched_job_add_implicit_dependencies v2")
landed, with its fixup of
commit 4eaf02d607 ("drm/scheduler: fix drm_sched_job_add_implicit_dependencies").
At that point it was a slightly different flavour of a double free, which
commit 963d0b3569 ("drm/scheduler: fix drm_sched_job_add_implicit_dependencies harder")
noticed and attempted to fix.
But it only moved the double free from happening inside the
drm_sched_job_add_dependency(), when releasing the reference not yet
obtained, to the caller, when releasing the reference already released by
the former in the failure case.
As such it is not easy to identify the right target for the fixes tag so
lets keep it simple and just continue the chain.
While fixing we also improve the comment and explain the reason for taking
the reference and not dropping it.
Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@igalia.com>
Fixes: 963d0b3569 ("drm/scheduler: fix drm_sched_job_add_implicit_dependencies harder")
Reported-by: Dan Carpenter <dan.carpenter@linaro.org>
Closes: https://lore.kernel.org/dri-devel/aNFbXq8OeYl3QSdm@stanley.mountain/
Cc: Christian König <christian.koenig@amd.com>
Cc: Rob Clark <robdclark@chromium.org>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: Matthew Brost <matthew.brost@intel.com>
Cc: Danilo Krummrich <dakr@kernel.org>
Cc: Philipp Stanner <phasta@kernel.org>
Cc: Christian König <ckoenig.leichtzumerken@gmail.com>
Cc: dri-devel@lists.freedesktop.org
Cc: stable@vger.kernel.org # v5.16+
Signed-off-by: Philipp Stanner <phasta@kernel.org>
Link: https://lore.kernel.org/r/20251015084015.6273-1-tvrtko.ursulin@igalia.com
Merge series from Cristian Ciocaltea <cristian.ciocaltea@collabora.com>:
This patch series addresses a set of issues in the Nuvoton NAU88L21
audio codec driver related to interrupt handling and jack hotplug
detection reliability.
The changes focus on:
* Eliminating race conditions between jack insertion and ejection events
* Ensuring interrupts are consistently and correctly cleared before
unmasking
* Introducing a DMI-based quirk to bypass the jack debounce circuit on
Valve Steam Deck, improving detection accuracy under stress
* Improving robustness of the IRQ handler by avoiding unnecessary
blocking operations
The series has been tested on affected hardware to verify correct
behavior during repeated and rapid jack hotplug cycles.
Merge series from Le Qi <le.qi@oss.qualcomm.com>:
This patch series adds support for the QCS615 sound card:
- Updates device tree bindings for SM8250 to include QCS615.
- Adds QCS615 support in the SC8280XP ASoC driver.
The HW always works on a 4K page size. When the OS supports larger
pages, we fragment them across multiple BDQ descriptors.
We were not properly incrementing the descriptor, which resulted in us
specifying the last chunks id/addr and then 15 zero descriptors. This
would cause packet loss and driver crashes. This is not a fix since the
Kconfig prevents use outside of x86.
Signed-off-by: Dimitri Daskalakis <dimitri.daskalakis1@gmail.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20251013211449.1377054-2-dimitri.daskalakis1@gmail.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Vendor quirk QUIRK_FLAG_CTL_MSG_DELAY_1M was inadvertently missing when
adding quirk for Logitech H390. Add it back.
Fixes: 2b929b6eec ("ALSA: usb-audio: add mixer_playback_min_mute quirk for Logitech H390")
Signed-off-by: Pauli Virtanen <pav@iki.fi>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
ID 045e:070f Microsoft Corp. LifeChat LX-3000 Headset
has muted minimum Speaker Playback Volume, and 4 amixer steps were
observed to produce 1 actual volume step.
Apply min_mute quirk and correct res=48 -> 4*48.
Tested with the device.
Signed-off-by: Pauli Virtanen <pav@iki.fi>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Kunit's generate_params() was recently updated to take an additional
test context parameter. Xe's IP and platform parameter generators were
updated accordingly at the same time, but the new parameter was not
added to the functions' kerneldoc, resulting in the following warnings:
Warning: drivers/gpu/drm/xe/tests/xe_pci.c:78 function parameter 'test' not described in 'xe_pci_fake_data_gen_params'
Warning: drivers/gpu/drm/xe/tests/xe_pci.c:254 function parameter 'test' not described in 'xe_pci_graphics_ip_gen_param'
Warning: drivers/gpu/drm/xe/tests/xe_pci.c:278 function parameter 'test' not described in 'xe_pci_media_ip_gen_param'
Warning: drivers/gpu/drm/xe/tests/xe_pci.c:302 function parameter 'test' not described in 'xe_pci_id_gen_param'
Warning: drivers/gpu/drm/xe/tests/xe_pci.c:390 function parameter 'test' not described in 'xe_pci_live_device_gen_param'
5 warnings as errors
Document the new parameter to eliminate the warnings and make CI happy.
Fixes: b9a214b5f6 ("kunit: Pass parameterized test context to generate_params()")
Reviewed-by: Shuicheng Lin <shuicheng.lin@intel.com>
Link: https://lore.kernel.org/r/20251013153014.2362879-2-matthew.d.roper@intel.com
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
(cherry picked from commit 89e347f8a7)
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
If the location madvise() is set to
DRM_XE_PREFERRED_LOC_DEFAULT_SYSTEM, the drm_pagemap in the
SVM gpu fault handler will be set to NULL. However there is nothing
that explicitly migrates the data to system if it is already present
in device memory.
In that case, set the device memory owner to NULL to ensure
data gets properly migrated to system on page-fault.
v2:
- Remove redundant dpagemap assignment (Himal Prasad Ghimiray)
Signed-off-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Reviewed-by: Matthew Brost <matthew.brost@intel.com> #v1
Reviewed-by: Himal Prasad Ghimiray <himal.prasad.ghimiray@intel.com>
Link: https://lore.kernel.org/r/20251010104149.72783-2-thomas.hellstrom@linux.intel.com
Fixes: 10aa5c8060 ("drm/gpusvm, drm/xe: Fix userptr to not allow device private pages")
(cherry picked from commit 2cfcea7a74)
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Now that smb3_crypto_shash_allocate() and smb311_crypto_shash_allocate()
are identical and only allocate "cmac(aes)", delete the latter and
replace the call to it with the former.
Reviewed-by: Stefan Metzmacher <metze@samba.org>
Acked-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Eric Biggers <ebiggers@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
Now that the SMB client accesses MD5, HMAC-MD5, HMAC-SHA256, and SHA-512
only via the library API and not via crypto_shash, allocating
crypto_shash objects for these algorithms is no longer necessary.
Remove all these allocations, their corresponding kconfig selections,
and their corresponding module soft dependencies.
Reviewed-by: Stefan Metzmacher <metze@samba.org>
Acked-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Eric Biggers <ebiggers@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
For the HMAC-MD5 computations in NTLMv2, use the HMAC-MD5 library
instead of a "hmac(md5)" crypto_shash. This is simpler and faster.
With the library there's no need to allocate memory, no need to handle
errors, and the HMAC-MD5 code is accessed directly without inefficient
indirect calls and other unnecessary API overhead.
To preserve the existing behavior of NTLMv2 support being disabled when
the kernel is booted with "fips=1", make setup_ntlmv2_rsp() check
fips_enabled itself. Previously it relied on the error from
cifs_alloc_hash("hmac(md5)", &hmacmd5).
Reviewed-by: Stefan Metzmacher <metze@samba.org>
Acked-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Eric Biggers <ebiggers@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
Convert cifs_calc_signature() to use the MD5 library instead of a "md5"
crypto_shash. This is simpler and faster. With the library there's no
need to allocate memory, no need to handle errors, and the MD5 code is
accessed directly without inefficient indirect calls and other
unnecessary API overhead.
To preserve the existing behavior of MD5 signature support being
disabled when the kernel is booted with "fips=1", make
cifs_calc_signature() check fips_enabled itself. Previously it relied
on the error from cifs_alloc_hash("md5", &server->secmech.md5).
Reviewed-by: Stefan Metzmacher <metze@samba.org>
Acked-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Eric Biggers <ebiggers@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
Convert parse_mf_symlink() and format_mf_symlink() to use the MD5
library instead of a "md5" crypto_shash. This is simpler and faster.
With the library there's no need to allocate memory, no need to handle
errors, and the MD5 code is accessed directly without inefficient
indirect calls and other unnecessary API overhead.
This also fixes an issue where these functions did not work on kernels
booted in FIPS mode. The use of MD5 here is for data integrity rather
than a security purpose, so it can use a non-FIPS-approved algorithm.
Reviewed-by: Stefan Metzmacher <metze@samba.org>
Acked-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Eric Biggers <ebiggers@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
Convert smb2_calc_signature() to use the HMAC-SHA256 library instead of
a "hmac(sha256)" crypto_shash. This is simpler and faster. With the
library there's no need to allocate memory, no need to handle errors,
and the HMAC-SHA256 code is accessed directly without inefficient
indirect calls and other unnecessary API overhead.
To make this possible, make __cifs_calc_signature() support both the
HMAC-SHA256 library and crypto_shash. (crypto_shash is still needed for
HMAC-MD5 and AES-CMAC. A later commit will switch HMAC-MD5 from shash
to the library. I'd like to eventually do the same for AES-CMAC, but it
doesn't have a library API yet. So for now, shash is still needed.)
Also remove the unnecessary 'sigptr' variable.
For now smb3_crypto_shash_allocate() still allocates a "hmac(sha256)"
crypto_shash. It will be removed in a later commit.
Reviewed-by: Stefan Metzmacher <metze@samba.org>
Acked-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Eric Biggers <ebiggers@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
Convert generate_key() to use the HMAC-SHA256 library instead of a
"hmac(sha256)" crypto_shash. This is simpler and faster. With the
library there's no need to allocate memory, no need to handle errors,
and the HMAC-SHA256 code is accessed directly without inefficient
indirect calls and other unnecessary API overhead.
Also remove the unnecessary 'hashptr' variable.
For now smb3_crypto_shash_allocate() still allocates a "hmac(sha256)"
crypto_shash. It will be removed in a later commit.
Reviewed-by: Stefan Metzmacher <metze@samba.org>
Acked-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Eric Biggers <ebiggers@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
Convert smb311_update_preauth_hash() to use the SHA-512 library instead
of a "sha512" crypto_shash. This is simpler and faster. With the
library there's no need to allocate memory, no need to handle errors,
and the SHA-512 code is accessed directly without inefficient indirect
calls and other unnecessary API overhead.
Remove the call to smb311_crypto_shash_allocate() from
smb311_update_preauth_hash(), since it appears to have been needed only
to allocate the "sha512" crypto_shash. (It also had the side effect of
allocating the "cmac(aes)" crypto_shash, but that's also done in
generate_key() which is where the AES-CMAC key is initialized.)
For now the "sha512" crypto_shash is still being allocated elsewhere.
It will be removed in a later commit.
Reviewed-by: Stefan Metzmacher <metze@samba.org>
Acked-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Eric Biggers <ebiggers@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
Malicious SMB server can send invalid reply to FSCTL_DFS_GET_REFERRALS
- reply smaller than sizeof(struct get_dfs_referral_rsp)
- reply with number of referrals smaller than NumberOfReferrals in the
header
Processing of such replies will cause oob.
Return -EINVAL error on such replies to prevent oob-s.
Signed-off-by: Eugene Korenevsky <ekorenevsky@aliyun.com>
Cc: stable@vger.kernel.org
Suggested-by: Nathan Chancellor <nathan@kernel.org>
Acked-by: Paulo Alcantara (Red Hat) <pc@manguebit.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
Fix three refcount inconsistency issues related to `cifs_sb_tlink`.
Comments for `cifs_sb_tlink` state that `cifs_put_tlink()` needs to be
called after successful calls to `cifs_sb_tlink()`. Three calls fail to
update refcount accordingly, leading to possible resource leaks.
Fixes: 8ceb984379 ("CIFS: Move rename to ops struct")
Fixes: 2f1afe2599 ("cifs: Use smb 2 - 3 and cifsacl mount options getacl functions")
Fixes: 366ed846df ("cifs: Use smb 2 - 3 and cifsacl mount options setacl function")
Cc: stable@vger.kernel.org
Signed-off-by: Shuhao Fu <sfual@cse.ust.hk>
Signed-off-by: Steve French <stfrench@microsoft.com>
dev->chipid is used in lan78xx_init_mac_address before it's initialized:
lan78xx_reset() {
lan78xx_init_mac_address()
lan78xx_read_eeprom()
lan78xx_read_raw_eeprom() <- dev->chipid is used here
dev->chipid = ... <- dev->chipid is initialized correctly here
}
Reorder initialization so that dev->chipid is set before calling
lan78xx_init_mac_address().
Fixes: a0db7d10b7 ("lan78xx: Add to handle mux control per chip id")
Signed-off-by: I Viswanath <viswanathiyyappan@gmail.com>
Reviewed-by: Vadim Fedorenko <vadim.fedorenko@linux.dev>
Reviewed-by: Khalid Aziz <khalid@kernel.org>
Link: https://patch.msgid.link/20251013181648.35153-1-viswanathiyyappan@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Marc Kleine-Budde says:
====================
pull-request: can 2025-10-14
The first 2 paches are by Celeste Liu and target the gS_usb driver.
The first patch remove the limitation to 3 CAN interface per USB
device. The second patch adds the missing population of
net_device->dev_port.
The next 4 patches are by me and fix the m_can driver. They add a
missing pm_runtime_disable(), fix the CAN state transition back to
Error Active and fix the state after ifup and suspend/resume.
Another patch by me targets the m_can driver, too and replaces Dong
Aisheng's old email address.
The next 2 patches are by Vincent Mailhol and update the CAN
networking Documentation.
Tetsuo Handa contributes the last patch that add missing cleanup calls
in the NETDEV_UNREGISTER notification handler.
* tag 'linux-can-fixes-for-6.18-20251014' of git://git.kernel.org/pub/scm/linux/kernel/git/mkl/linux-can:
can: j1939: add missing calls in NETDEV_UNREGISTER notification handler
can: add Transmitter Delay Compensation (TDC) documentation
can: remove false statement about 1:1 mapping between DLC and length
can: m_can: replace Dong Aisheng's old email address
can: m_can: fix CAN state in system PM
can: m_can: m_can_chip_config(): bring up interface in correct state
can: m_can: m_can_handle_state_errors(): fix CAN state transition to Error Active
can: m_can: m_can_plat_remove(): add missing pm_runtime_disable()
can: gs_usb: gs_make_candev(): populate net_device->dev_port
can: gs_usb: increase max interface to U8_MAX
====================
Link: https://patch.msgid.link/20251014122140.990472-1-mkl@pengutronix.de
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Kory Maincent says:
====================
Preserve PSE PD692x0 configuration across reboots
Previously, the driver would always reconfigure the PSE hardware on
probe, causing a port matrix reflash that resulted in temporary power
loss to all connected devices. This change maintains power continuity
by preserving existing configuration when the PSE has been previously
initialized.
====================
Link: https://patch.msgid.link/20251013-feature_pd692x0_reboot_keep_conf-v2-0-68ab082a93dd@bootlin.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Detect when PSE hardware is already configured (user byte == 42) and
skip hardware initialization to prevent power interruption to connected
devices during system reboots.
Previously, the driver would always reconfigure the PSE hardware on
probe, causing a port matrix reflash that resulted in temporary power
loss to all connected devices. This change maintains power continuity
by preserving existing configuration when the PSE has been previously
initialized.
Signed-off-by: Kory Maincent <kory.maincent@bootlin.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20251013-feature_pd692x0_reboot_keep_conf-v2-3-68ab082a93dd@bootlin.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Cache the port matrix configuration in driver private data to enable
PSE controller reconfiguration. This refactoring separates device tree
parsing from hardware configuration application, allowing settings to be
reapplied without reparsing the device tree.
This refactoring is a prerequisite for preserving PSE configuration
across reboots to prevent power disruption to connected devices.
Signed-off-by: Kory Maincent <kory.maincent@bootlin.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20251013-feature_pd692x0_reboot_keep_conf-v2-2-68ab082a93dd@bootlin.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Alok Tiwari
Vignesh Raman
Anna Maniscalco
Akhil P Oommen
Rob Clark
Eric Dumazet
Paolo Abeni
Jiawen Wu
Mikhail Kshevetskiy
Hao Ge
Tvrtko Ursulin
Samuel Holland
Mark Brown
Rob Herring (Arm)
Dimitri Daskalakis
Pauli Virtanen
Matthew Auld
Matt Roper
Thomas Hellström
Eric Biggers
Eugene Korenevsky
Shuhao Fu
I Viswanath
Jakub Kicinski
Lorenzo Bianconi
Kory Maincent (Dent Project)
Florian Fainelli