Add a simple test for the corner case not currently covered by the
sticky fingers quirk. Because it's a corner case test, we only test this
on a couple of devices, not on all of them because the value of adding
the same test over and over is rather moot.
Signed-off-by: Benjamin Tissoires <bentiss@kernel.org>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
The sticky fingers quirk (MT_QUIRK_STICKY_FINGERS) was only considering
the case when slots were not released during the last report.
This can be problematic if the firmware forgets to release a finger
while others are still present.
This was observed on the Synaptics DLL0945 touchpad found on the Dell
XPS 9310 and the Dell Inspiron 5406.
Fixes: 4f4001bc76 ("HID: multitouch: fix rare Win 8 cases when the touch up event gets missing")
Cc: stable@vger.kernel.org
Signed-off-by: Benjamin Tissoires <bentiss@kernel.org>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
HID_DG_PEN devices should have a suffix of "Stylus", as pointed out by
commit c0ee1d5716 ("HID: hid-input: Add suffix also for HID_DG_PEN").
However, on multitouch devices, these suffixes may be overridden. Before
that commit, HID_DG_PEN devices would get the "Stylus" suffix, but after
that, multitouch would override them to have an "UNKNOWN" suffix. Just add
HID_DG_PEN to the list of non-overriden suffixes in multitouch.
Before this fix:
[ 0.470981] input: ELAN9008:00 04F3:2E14 UNKNOWN as /devices/pci0000:00/0000:00:15.1/i2c_designware.1/i2c-16/i2c-ELAN9008:00/0018:04F3:2E14.0001/input/input8
ELAN9008:00 04F3:2E14 UNKNOWN
After this fix:
[ 0.474332] input: ELAN9008:00 04F3:2E14 Stylus as /devices/pci0000:00/0000:00:15.1/i2c_designware.1/i2c-16/i2c-ELAN9008:00/0018:04F3:2E14.0001/input/input8
ELAN9008:00 04F3:2E14 Stylus
Fixes: c0ee1d5716 ("HID: hid-input: Add suffix also for HID_DG_PEN")
Signed-off-by: Thadeu Lima de Souza Cascardo <cascardo@igalia.com>
Reviewed-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
Commit 581c448476 ("HID: input: map digitizer battery usage") added
handling of battery events for digitizers (typically for batteries
presented in stylii). Digitizers typically report correct battery levels
only when stylus is actively touching the surface, and in other cases
they may report battery level of 0. To avoid confusing consumers of the
battery information the code was added to filer out reports with 0
battery levels.
However there exist other kinds of devices that may legitimately report
0 battery levels. Fix this by filtering out 0-level reports only for
digitizer usages, and continue reporting them for other kinds of devices
(Smart Batteries, etc).
Reported-by: 卢国宏 <luguohong@xiaomi.com>
Fixes: 581c448476 ("HID: input: map digitizer battery usage")
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
Convert test_cpu to use the newly added values_close_report() helper
to print detailed diagnostics when a tolerance check fails. This
provides clearer insight into deviations while run in the CI.
Signed-off-by: Sebastian Chlad <sebastian.chlad@suse.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
Some cgroup selftests, such as test_cpu, occasionally fail by a very
small margin and if run in the CI context, it is useful to have detailed
diagnostic output to understand the deviation.
Introduce a values_close_report() helper which performs the same
comparison as values_close(), but prints detailed information when the
values differ beyond the allowed tolerance.
Signed-off-by: Sebastian Chlad <sebastian.chlad@suse.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
Inspired by commit c065b6046b ("Use CONFIG_EXT4_FS instead of
CONFIG_EXT3_FS in all of the defconfigs") I looked around for any other
left-over EXT3 config options, and found some old defconfig files still
mentioned CONFIG_EXT3_DEFAULTS_TO_ORDERED.
That config option was removed a decade ago in commit c290ea01ab ("fs:
Remove ext3 filesystem driver"). It had a good run, but let's remove it
for good.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Pull ext4 bug fixes from Ted Ts'o:
- Fix regression caused by removing CONFIG_EXT3_FS when testing some
very old defconfigs
- Avoid a BUG_ON when opening a file on a maliciously corrupted file
system
- Avoid mm warnings when freeing a very large orphan file metadata
- Avoid a theoretical races between metadata writeback and checkpoints
(it's very hard to hit in practice, since the race requires that the
writeback take a very long time)
* tag 'ext4_for_linus-6.18-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4:
Use CONFIG_EXT4_FS instead of CONFIG_EXT3_FS in all of the defconfigs
ext4: free orphan info with kvfree
ext4: detect invalid INLINE_DATA + EXTENTS flag combination
ext4, doc: fix and improve directory hash tree description
ext4: wait for ongoing I/O to complete before freeing blocks
jbd2: ensure that all ongoing I/O complete before freeing blocks
The era of hand-rolled HIWORD_UPDATE macros is over, at least for those
drivers that use constant masks.
Like many other Rockchip drivers, rockchip-dfi brings with it its own
HIWORD_UPDATE macro. This variant doesn't shift the value (and like the
others, doesn't do any checking).
Remove it, and replace instances of it with hw_bitfield.h's
FIELD_PREP_WM16. Since FIELD_PREP_WM16 requires contiguous masks and
shifts the value for us, some reshuffling of definitions needs to
happen.
This gives us better compile-time error checking, and in my opinion,
nicer code.
Tested on an RK3568 ODROID-M1 board (LPDDR4X at 1560 MHz, an RK3588
Radxa ROCK 5B board (LPDDR4X at 2112 MHz) and an RK3588 Radxa ROCK 5T
board (LPDDR5 at 2400 MHz). perf measurements were consistent with the
measurements of stress-ng --stream in all cases.
Signed-off-by: Nicolas Frattaroli <nicolas.frattaroli@collabora.com>
Signed-off-by: Yury Norov (NVIDIA) <yury.norov@gmail.com>
The SCMI_XFER_FLAG_IS_RAW flag was being cleared prematurely in
scmi_xfer_raw_put() before the transfer completion was properly
acknowledged by the raw message handlers.
Move the clearing of SCMI_XFER_FLAG_IS_RAW and SCMI_XFER_FLAG_CHAN_SET
from scmi_xfer_raw_put() to __scmi_xfer_put() to ensure the flags remain
set throughout the entire raw message processing pipeline until the
transfer is returned to the free pool.
Fixes: 3095a3e25d ("firmware: arm_scmi: Add xfer helpers to provide raw access")
Suggested-by: Cristian Marussi <cristian.marussi@arm.com>
Signed-off-by: Artem Shimko <a.shimko.dev@gmail.com>
Reviewed-by: Cristian Marussi <cristian.marussi@arm.com>
Message-Id: <20251008091057.1969260-1-a.shimko.dev@gmail.com>
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
When the SCMI debug subsystem fails to initialize, the related debug root
will be missing, and the underlying descriptor will be NULL.
Handle this fault condition in the SCMI debug helpers that maintain
metrics counters.
Fixes: 0b3d48c472 ("firmware: arm_scmi: Track basic SCMI communication debug metrics")
Signed-off-by: Cristian Marussi <cristian.marussi@arm.com>
Message-Id: <20251014115346.2391418-1-cristian.marussi@arm.com>
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
There might be many reasons why a user is resizing a ring, e.g. moving
to huge pages or for some memory compaction using IORING_SETUP_NO_MMAP.
Don't bypass resizing, the user will definitely be surprised seeing 0
while the rings weren't actually moved to a new place.
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
io_create_region_mmap_safe() protects publishing of a region against
concurrent mmap calls, however we should also protect against it when
removing a region. There is a gap io_register_mem_region() where it
safely publishes a region, but then copy_to_user goes wrong and it
unsafely frees the region.
Cc: stable@vger.kernel.org
Fixes: 087f997870 ("io_uring/memmap: implement mmap for regions")
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Remove the acquisition and release of q->elevator_lock in the
blkg_conf_open_bdev_frozen() and blkg_conf_exit_frozen() functions. The
elevator lock is no longer needed in these code paths since commit
78c271344b ("block: move wbt_enable_default() out of queue freezing
from sched ->exit()") which introduces `disk->rqos_state_mutex` for
protecting wbt state change, and not necessary to abuse elevator_lock
for this purpose.
This change helps to solve the lockdep warning reported from Yu Kuai[1].
Pass blktests/throtl with lockdep enabled.
Links: https://lore.kernel.org/linux-block/e5e7ac3f-2063-473a-aafb-4d8d43e5576e@yukuai.org.cn/ [1]
Fixes: commit 78c271344b ("block: move wbt_enable_default() out of queue freezing from sched ->exit()")
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Reviewed-by: Nilay Shroff <nilay@linux.ibm.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
After resuming from S4, all CPUs except the boot CPU have the wrong EPP
hint programmed. This is because when the CPUs were offlined the EPP value
was reset to 0.
This is a similar problem as fixed by
commit ba3319e590 ("cpufreq/amd-pstate: Fix a regression leading to EPP
0 after resume") and the solution is also similar. When offlining rather
than reset the values to zero, reset them to match those chosen by the
policy. When the CPUs are onlined again these values will be restored.
Closes: https://community.frame.work/t/increased-power-usage-after-resuming-from-suspend-on-ryzen-7040-kernel-6-15-regression/74531/20?u=mario_limonciello
Fixes: 608a76b652 ("cpufreq/amd-pstate: Add support for the "Requested CPU Min frequency" BIOS option")
Reviewed-by: Gautham R. Shenoy <gautham.shenoy@amd.com>
Signed-off-by: Mario Limonciello (AMD) <superm1@kernel.org>
If a smbdirect_mr_io structure if still visible to callers of
smbd_register_mr() we can't free the related memory when the
connection is disconnected! Otherwise smbd_deregister_mr()
will crash.
Now we use a mutex and refcounting in order to keep the
memory around if the connection is disconnected.
It means smbd_deregister_mr() can be called at any later time to free
the memory, which is no longer referenced by nor referencing the
connection.
It also means smbd_destroy() no longer needs to wait for
mr_io.used.count to become 0.
Fixes: 050b8c3740 ("smbd: Make upper layer decide when to destroy the transport")
Cc: Steve French <smfrench@gmail.com>
Cc: Tom Talpey <tom@talpey.com>
Cc: Long Li <longli@microsoft.com>
Cc: Namjae Jeon <linkinjeon@kernel.org>
Cc: linux-cifs@vger.kernel.org
Cc: samba-technical@lists.samba.org
Signed-off-by: Stefan Metzmacher <metze@samba.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
Since commit 305853cce3 ("ksmbd: Fix race condition in RPC handle list
access"), ksmbd_session_rpc_method() attempts to lock sess->rpc_lock.
This causes hung connections / tasks when a client attempts to open
a named pipe. Using Samba's rpcclient tool:
$ rpcclient //192.168.1.254 -U user%password
$ rpcclient $> srvinfo
<connection hung here>
Kernel side:
"echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
task:kworker/0:0 state:D stack:0 pid:5021 tgid:5021 ppid:2 flags:0x00200000
Workqueue: ksmbd-io handle_ksmbd_work
Call trace:
__schedule from schedule+0x3c/0x58
schedule from schedule_preempt_disabled+0xc/0x10
schedule_preempt_disabled from rwsem_down_read_slowpath+0x1b0/0x1d8
rwsem_down_read_slowpath from down_read+0x28/0x30
down_read from ksmbd_session_rpc_method+0x18/0x3c
ksmbd_session_rpc_method from ksmbd_rpc_open+0x34/0x68
ksmbd_rpc_open from ksmbd_session_rpc_open+0x194/0x228
ksmbd_session_rpc_open from create_smb2_pipe+0x8c/0x2c8
create_smb2_pipe from smb2_open+0x10c/0x27ac
smb2_open from handle_ksmbd_work+0x238/0x3dc
handle_ksmbd_work from process_scheduled_works+0x160/0x25c
process_scheduled_works from worker_thread+0x16c/0x1e8
worker_thread from kthread+0xa8/0xb8
kthread from ret_from_fork+0x14/0x38
Exception stack(0x8529ffb0 to 0x8529fff8)
The task deadlocks because the lock is already held:
ksmbd_session_rpc_open
down_write(&sess->rpc_lock)
ksmbd_rpc_open
ksmbd_session_rpc_method
down_read(&sess->rpc_lock) <-- deadlock
Adjust ksmbd_session_rpc_method() callers to take the lock when necessary.
Fixes: 305853cce3 ("ksmbd: Fix race condition in RPC handle list access")
Signed-off-by: Marios Makassikis <mmakassikis@freebox.fr>
Acked-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
The following kmemleak splat:
[ 8.105530] kmemleak: Trying to color unknown object at 0xff11000100e918c0 as Black
[ 8.106521] Call Trace:
[ 8.106521] <TASK>
[ 8.106521] dump_stack_lvl+0x4b/0x70
[ 8.106521] kvfree_call_rcu+0xcb/0x3b0
[ 8.106521] ? hrtimer_cancel+0x21/0x40
[ 8.106521] bpf_obj_free_fields+0x193/0x200
[ 8.106521] htab_map_update_elem+0x29c/0x410
[ 8.106521] bpf_prog_cfc8cd0f42c04044_overwrite_cb+0x47/0x4b
[ 8.106521] bpf_prog_8c30cd7c4db2e963_overwrite_timer+0x65/0x86
[ 8.106521] bpf_prog_test_run_syscall+0xe1/0x2a0
happens due to the combination of features and fixes, but mainly due to
commit 6d78b4473c ("bpf: Tell memcg to use allow_spinning=false path in bpf_timer_init()")
It's using __GFP_HIGH, which instructs slub/kmemleak internals to skip
kmemleak_alloc_recursive() on allocation, so subsequent kfree_rcu()->
kvfree_call_rcu()->kmemleak_ignore() complains with the above splat.
To fix this imbalance, replace bpf_map_kmalloc_node() with
kmalloc_nolock() and kfree_rcu() with call_rcu() + kfree_nolock() to
make sure that the objects allocated with kmalloc_nolock() are freed
with kfree_nolock() rather than the implicit kfree() that kfree_rcu()
uses internally.
Note, the kmalloc_nolock() happens under bpf_spin_lock_irqsave(), so
it will always fail in PREEMPT_RT. This is not an issue at the moment,
since bpf_timers are disabled in PREEMPT_RT. In the future
bpf_spin_lock will be replaced with state machine similar to
bpf_task_work.
Fixes: 6d78b4473c ("bpf: Tell memcg to use allow_spinning=false path in bpf_timer_init()")
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Reviewed-by: Shakeel Butt <shakeel.butt@linux.dev>
Acked-by: Harry Yoo <harry.yoo@oracle.com>
Acked-by: Vlastimil Babka <vbabka@suse.cz>
Cc: linux-mm@kvack.org
Link: https://lore.kernel.org/bpf/20251015000700.28988-1-alexei.starovoitov@gmail.com
Since the len argument value passed to exfat_ioctl_set_volume_label()
from exfat_nls_to_utf16() is passed 1 too large, an out-of-bounds read
occurs when dereferencing p_cstring in exfat_nls_to_ucs2() later.
And because of the NLS_NAME_OVERLEN macro, another error occurs when
creating a file with a period at the end using utf8 and other iocharsets.
So to avoid this, you should remove the code that uses NLS_NAME_OVERLEN
macro and make the len argument value be the length of the label string,
but with a maximum length of FSLABEL_MAX - 1.
Reported-by: syzbot+98cc76a76de46b3714d4@syzkaller.appspotmail.com
Closes: https://syzkaller.appspot.com/bug?extid=98cc76a76de46b3714d4
Fixes: d01579d590 ("exfat: Add support for FS_IOC_{GET,SET}FSLABEL")
Suggested-by: Pali Rohár <pali@kernel.org>
Signed-off-by: Jeongjun Park <aha310510@gmail.com>
Signed-off-by: Namjae Jeon <linkinjeon@kernel.org>
In try_to_register_card(), the return value of usb_ifnum_to_if() is
passed directly to usb_interface_claimed() without a NULL check, which
will lead to a NULL pointer dereference when creating an invalid
USB audio device. Fix this by adding a check to ensure the interface
pointer is valid before passing it to usb_interface_claimed().
Fixes: 39efc9c8a9 ("ALSA: usb-audio: Fix last interface check for registration")
Closes: https://lore.kernel.org/all/CANypQFYtQxHL5ghREs-BujZG413RPJGnO5TH=xjFBKpPts33tA@mail.gmail.com/
Signed-off-by: Jiaming Zhang <r772577952@gmail.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
The lock-related debug logic (CONFIG_LOCK_STAT) in the kernel is noting
the following warning when the BlueField-3 SOC is booted:
BUG: key ffff00008a3402a8 has not been registered!
------------[ cut here ]------------
DEBUG_LOCKS_WARN_ON(1)
WARNING: CPU: 4 PID: 592 at kernel/locking/lockdep.c:4801 lockdep_init_map_type+0x1d4/0x2a0
<snip>
Call trace:
lockdep_init_map_type+0x1d4/0x2a0
__kernfs_create_file+0x84/0x140
sysfs_add_file_mode_ns+0xcc/0x1cc
internal_create_group+0x110/0x3d4
internal_create_groups.part.0+0x54/0xcc
sysfs_create_groups+0x24/0x40
device_add+0x6e8/0x93c
device_register+0x28/0x40
__hwmon_device_register+0x4b0/0x8a0
devm_hwmon_device_register_with_groups+0x7c/0xe0
mlxbf_pmc_probe+0x1e8/0x3e0 [mlxbf_pmc]
platform_probe+0x70/0x110
The mlxbf_pmc driver must call sysfs_attr_init() during the
initialization of the "count_clock" data structure to avoid
this warning.
Fixes: 5efc800975 ("platform/mellanox: mlxbf-pmc: Add support for monitoring cycle count")
Reviewed-by: Shravan Kumar Ramani <shravankr@nvidia.com>
Signed-off-by: David Thompson <davthompson@nvidia.com>
Link: https://patch.msgid.link/20251013155605.3589770-1-davthompson@nvidia.com
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
We found an infinite loop bug in the exFAT file system that can lead to a
Denial-of-Service (DoS) condition. When a dentry in an exFAT filesystem is
malformed, the following system calls — SYS_openat, SYS_ftruncate, and
SYS_pwrite64 — can cause the kernel to hang.
Root cause analysis shows that the size validation code in exfat_find()
does not check whether dentry.stream.valid_size is negative. As a result,
the system calls mentioned above can succeed and eventually trigger the DoS
issue.
This patch adds a check for negative dentry.stream.valid_size to prevent
this vulnerability.
Co-developed-by: Seunghun Han <kkamagui@gmail.com>
Signed-off-by: Seunghun Han <kkamagui@gmail.com>
Co-developed-by: Jihoon Kwon <jimmyxyz010315@gmail.com>
Signed-off-by: Jihoon Kwon <jimmyxyz010315@gmail.com>
Signed-off-by: Jaehun Gou <p22gone@gmail.com>
Signed-off-by: Namjae Jeon <linkinjeon@kernel.org>
Since blamed commit, unregister_netdevice_many_notify() takes the netdev
mutex if the device needs it.
If the device list is too long, this will lock more device mutexes than
lockdep can handle:
unshare -n \
bash -c 'for i in $(seq 1 100);do ip link add foo$i type dummy;done'
BUG: MAX_LOCK_DEPTH too low!
turning off the locking correctness validator.
depth: 48 max: 48!
48 locks held by kworker/u16:1/69:
#0: ..148 ((wq_completion)netns){+.+.}-{0:0}, at: process_one_work
#1: ..d40 (net_cleanup_work){+.+.}-{0:0}, at: process_one_work
#2: ..bd0 (pernet_ops_rwsem){++++}-{4:4}, at: cleanup_net
#3: ..aa8 (rtnl_mutex){+.+.}-{4:4}, at: default_device_exit_batch
#4: ..cb0 (&dev_instance_lock_key#3){+.+.}-{4:4}, at: unregister_netdevice_many_notify
[..]
Add a helper to close and then unlock a list of net_devices.
Devices that are not up have to be skipped - netif_close_many always
removes them from the list without any other actions taken, so they'd
remain in locked state.
Close devices whenever we've used up half of the tracking slots or we
processed entire list without hitting the limit.
Fixes: 7e4d784f58 ("net: hold netdev instance lock during rtnetlink operations")
Signed-off-by: Florian Westphal <fw@strlen.de>
Link: https://patch.msgid.link/20251013185052.14021-1-fw@strlen.de
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
We started getting a crash in BPF CI, which seems to originate from
test_parse_test_list_file() test and is happening at this line:
ASSERT_OK(strcmp("test_with_spaces", set.tests[0].name), "test 0 name");
One way we can crash there is if set.cnt zero, which is checked for with
ASSERT_EQ() above, but we proceed after this regardless of the outcome.
Instead of crashing, we should bail out with test failure early.
Similarly, if parse_test_list_file() fails, we shouldn't be even looking
at set, so bail even earlier if ASSERT_OK() fails.
Fixes: 64276f01dc ("selftests/bpf: Test_progs can read test lists from file")
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Tested-by: Ihor Solodrai <ihor.solodrai@linux.dev>
Link: https://lore.kernel.org/r/20251014202037.72922-1-andrii@kernel.org
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Traces of cxl_poison events include an hpa_alias0 field if the poison
address is in a region configured with an ELC, Extended Linear Cache.
Since the ELC always comes first in the region, the calculation needs
to subtract the ELC size from the calculated HPA address.
Fixes: 8c520c5f1e ("cxl: Add extended linear cache address alias emission for cxl events")
Signed-off-by: Alison Schofield <alison.schofield@intel.com>
Reviewed-by: Dave Jiang <dave.jiang@intel.com>
Signed-off-by: Dave Jiang <dave.jiang@intel.com>
The commit a43ac325c7 ("PCI: Set up bridge resources earlier") moved
bridge window resources set up earlier than before. The change was
necessary to support another change that got pulled on the last minute
due to breaking s390 and other systems.
The presence of valid bridge window resources earlier than before allows
pci_assign_unassigned_root_bus_resources() call from pci_host_probe()
assign the bridge windows. Some host bridges, however, have to wait first
for the link up event before they can enumerate successfully (see e.g.
qcom_pcie_global_irq_thread()) and thus the bus has not been enumerated yet
while calling pci_host_probe().
Calling pci_assign_unassigned_root_bus_resources() without results from
enumeration can result in sizing bridge windows with too small sizes which
cannot be later corrected after the enumeration has completed because
bridge windows have become pinned in place by the other resources.
Interestingly, it seems pci_read_bridge_bases() is not called at all in the
problematic case and the bridge window resource type setup is done by
pci_bridge_check_ranges() and sizing by the usual resource fitting logic.
The root problem behind all this looks pretty generic. If resource fitting
is called too early, the hotplug reservation and old size lower bounding
cause the bridge windows to be assigned without children but with non-zero
size, which leads to these pinning problems. As such, this can likely be
solved on the general level but the solution does not look trivial.
As the commit a43ac325c7 ("PCI: Set up bridge resources earlier") was
prequisite for other change that did not end up into kernel yet, revert it
to resolve the resource assignment failures and give time to code and test
a generic solution.
Fixes: a43ac325c7 ("PCI: Set up bridge resources earlier")
Reported-by: Val Packett <val@packett.cool>
Link: https://lore.kernel.org/r/017ff8df-511c-4da8-b3cf-edf2cb7f1a67@packett.cool
Reported-by: Guenter Roeck <linux@roeck-us.net>
Link: https://lore.kernel.org/r/df266709-a9b3-4fd8-af3a-c22eb3c9523a@roeck-us.net
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Link: https://patch.msgid.link/20251014163602.17138-1-ilpo.jarvinen@linux.intel.com
If we load a BPF scheduler while another scheduler is already running,
alloc_kick_pseqs() would be called again, overwriting the previously
allocated arrays.
Fix by moving the alloc_kick_pseqs() call after the scx_enable_state()
check, ensuring that the arrays are only allocated when a scheduler can
actually be loaded.
Fixes: 14c1da3895 ("sched_ext: Allocate scx_kick_cpus_pnt_seqs lazily using kvzalloc()")
Signed-off-by: Andrea Righi <arighi@nvidia.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
KASAN reports a stack-out-of-bounds access in validate_region_offset()
while running the cxl-poison.sh unit test because the printk format
specifier, %pr format, is not a match for the resource_size_t type of
the variables. %pr expects struct resource pointers and attempts to
dereference the structure fields, reading beyond the bounds of the
stack variables.
Since these messages emit an 'A exceeds B' type of message, keep
the resource_size_t's and use the %pa specifier to be architecture
safe.
BUG: KASAN: stack-out-of-bounds in resource_string.isra.0+0xe9a/0x1690
[] Read of size 8 at addr ffff88800a7afb40 by task bash/1397
...
[] The buggy address belongs to stack of task bash/1397
[] and is located at offset 56 in frame:
[] validate_region_offset+0x0/0x1c0 [cxl_core]
Fixes: c3dd67681c ("cxl/region: Add inject and clear poison by region offset")
Signed-off-by: Alison Schofield <alison.schofield@intel.com>
Reviewed-by: Dave Jiang <dave.jiang@intel.com>
Signed-off-by: Dave Jiang <dave.jiang@intel.com>
Benjamin Tissoires
Thadeu Lima de Souza Cascardo
Dmitry Torokhov
Sebastian Chlad
Linus Torvalds
Nicolas Frattaroli
Miguel Ojeda
Artem Shimko
Cristian Marussi
Jouni Högander
Pavel Begunkov
Ming Lei
Yu Kuai
Mario Limonciello (AMD)
Xianwei Zhao
ZhangGuoDong
Stefan Metzmacher
Marios Makassikis
Alexei Starovoitov
Srinivas Kandagatla
Shuming Fan
Jeongjun Park
tr1x_em
Jiaming Zhang
Denis Benato
David Thompson
Kurt Borja
Thomas Zimmermann
Jaehun Gou
Jakub Kicinski
Lorenzo Bianconi
Florian Westphal
Heiner Kallweit
Andrii Nakryiko
Alison Schofield
Jonas Gorski
Ilpo Järvinen
Andrea Righi