The tx/rx ring size calculation is somewhat complex and partially hidden
behind a macro. Move that out of the {RX,TX}_RING_BYTES() macros and
macb_{alloc,free}_consistent() functions into neat separate functions.
In macb_free_consistent(), we drop the size variable and directly call
the size helpers in the arguments list. In macb_alloc_consistent(), we
keep the size variable that is used by netdev_dbg() calls.
Acked-by: Nicolas Ferre <nicolas.ferre@microchip.com>
Signed-off-by: Théo Lebrun <theo.lebrun@bootlin.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20250923-macb-fixes-v6-3-772d655cdeb6@bootlin.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The MACB driver acts as if TBQPH/RBQPH are configurable on a per queue
basis; this is a lie. A single register configures the upper 32 bits of
each DMA descriptor buffers for all queues.
Concrete actions:
- Drop GEM_TBQPH/GEM_RBQPH macros which have a queue index argument.
Only use MACB_TBQPH/MACB_RBQPH constants.
- Drop struct macb_queue->TBQPH/RBQPH fields.
- In macb_init_buffers(): do a single write to TBQPH and RBQPH for all
queues instead of a write per queue.
- In macb_tx_error_task(): drop the write to TBQPH.
- In macb_alloc_consistent(): if allocations give different upper
32-bits, fail. Previously, it would have lead to silent memory
corruption as queues would have used the upper 32 bits of the alloc
from queue 0 and their own low 32 bits.
- In macb_suspend(): if we use the tie off descriptor for suspend, do
the write once for all queues instead of once per queue.
Fixes: fff8019a08 ("net: macb: Add 64 bit addressing support for GEM")
Fixes: ae1f2a56d2 ("net: macb: Added support for many RX queues")
Reviewed-by: Sean Anderson <sean.anderson@linux.dev>
Acked-by: Nicolas Ferre <nicolas.ferre@microchip.com>
Signed-off-by: Théo Lebrun <theo.lebrun@bootlin.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20250923-macb-fixes-v6-2-772d655cdeb6@bootlin.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Petr Machata says:
====================
selftests: Mark auto-deferring functions clearly
selftests/net/lib.sh contains a suite of iproute2 wrappers that
automatically schedule the corresponding cleanup through defer. The fact
they do so is however not immediately obvious, one needs to know which
functions are handling the deferral behind the scenes, and which expect the
caller to handle cleanups themselves.
A convention for these auto-deferring functions would help both writing and
patch review. This patchset does so by marking these functions with an adf_
prefix. We already have a few such functions: forwarding/lib.sh has
adf_mcd_start() and a few selftests add private helpers that conform to
this convention.
Patches #1 to #8 gradually convert individual functions, one per patch.
Patch #9 renames an auto-deferring private helpers named dfr_* to adf_*.
The plan is not to retro-rename all private helpers, but I happened to know
about this one.
Patches #10 to #12 introduce several autodefer helpers for commonly used
forwarding/lib.sh functions, and opportunistically convert straightforward
instances of 'action; defer counteraction' to the new helpers.
Patch #13 adds some README verbiage to pitch defer and the adf_*
convention.
====================
Link: https://patch.msgid.link/cover.1758821127.git.petrm@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Matthieu Baerts says:
====================
mptcp: pm: special case for c-flag + luminar endp
Here are some patches for the MPTCP PM, including some refactoring that
I thought it would be best to send at the end of a cycle to avoid
conflicts between net and net-next that could last a few weeks.
The most interesting changes are in the first and last patch, the rest
are patches refactoring the code & tests to validate the modifications.
- Patches 1 & 2: When servers set the C-flag in their MP_CAPABLE to tell
clients not to create subflows to the initial address and port -- e.g.
a deployment behind a L4 load balancer like a typical CDN deployment
-- clients will not use their other endpoints when default settings
are used. That's because the in-kernel path-manager uses the 'subflow'
endpoints to create subflows only to the initial address and port. The
first patch fixes that (for >=v5.14), and the second one validates it.
- Patches 3-14: various patches refactoring the code around the
in-kernel PM (mainly): split too long functions, rename variables and
functions to avoid confusions, reduce structure size, and compare IDs
instead of IP addresses. Note that one patch modifies one internal
variable used in one BPF selftest.
- Patch 15: ability to control endpoints that are used in reaction to a
new address announced by the other peer. With that, endpoints can be
used only once.
====================
Link: https://patch.msgid.link/20250925-net-next-mptcp-c-flag-laminar-v1-0-ad126cc47c6b@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Currently, upon the reception of an ADD_ADDR (and when the fullmesh flag
is not used), the in-kernel PM will create new subflows using the local
address the routing configuration will pick.
It would be easier to pick local addresses from a selected list of
endpoints, and use it only once, than relying on routing rules.
Use case: both the client (C) and the server (S) have two addresses (a
and b). The client establishes the connection between C(a) and S(a).
Once established, the server announces its additional address S(b). Once
received, the client connects to it using its second address C(b).
Compared to a situation without the 'laminar' endpoint for C(b), the
client didn't use this address C(b) to establish a subflow to the
server's primary address S(a). So at the end, we have:
C S
C(a) --- S(a)
C(b) --- S(b)
In case of a 3rd address on each side (C(c) and S(c)), upon the
reception of an ADD_ADDR with S(c), the client should not pick C(b)
because it has already been used. C(c) should then be used.
Note that this situation is currently possible if C doesn't add any
endpoint, but configure the routing in order to pick C(b) for the route
to S(b), and pick C(c) for the route to S(c). That doesn't sound very
practical because it means knowing in advance the IP addresses that
will be used and announced by the server.
'laminar', like the idea of laminar flows: the different subflows don't
mix with each other on an endpoint, unlike the "turbulent" way traffic
is mixed by 'fullmesh'.
In the code, the new endpoint type is added. Similar to the other
subflow types, an MPTCP_INFO counter is added. While at it, hole are now
commented in struct mptcp_info, to remember next time that these holes
can no longer be used.
Closes: https://github.com/multipath-tcp/mptcp_net-next/issues/503
Reviewed-by: Mat Martineau <martineau@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://patch.msgid.link/20250925-net-next-mptcp-c-flag-laminar-v1-15-ad126cc47c6b@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
When receiving an ADD_ADDR right after the 3WHS, the connection will
switch to 'fully established'. It means the MPTCP worker will be called
to treat two events, in this order: ADD_ADDR_RECEIVED, PM_ESTABLISHED.
The MPTCP endpoints cannot have the ID 0, because it is reserved to the
address and port used by the initial subflow. To be able to deal with
this case in different places, msk->mpc_endpoint_id contains the
endpoint ID linked to the initial subflow. This variable was only set
when treating the first PM_ESTABLISHED event, after ADD_ADDR_RECEIVED.
That's why in fill_local_addresses_vec(), the endpoint addresses were
compared with the one of the initial subflow, instead of only comparing
the IDs.
Instead, msk->mpc_endpoint_id is now set when treating ADD_ADDR_RECEIVED
as well, if needed, then the IDs can be compared.
To be able to do so, the code doing that is now in a dedicated helper,
and called from the functions linked to the two actions.
While at it, mptcp_endp_get_local_id() has also been moved up, next to
this new helper, because they are linked, and to be able to use it in
fill_local_addresses_vec() in the next commit.
Reviewed-by: Mat Martineau <martineau@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://patch.msgid.link/20250925-net-next-mptcp-c-flag-laminar-v1-14-ad126cc47c6b@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
All the 'unsigned int' variables from the 'pm_nl_pernet' structure are
bounded to MPTCP_PM_ADDR_MAX, currently set to 8. The endpoint ID is
also bounded by the protocol to 8-bit. MPTCP_PM_ADDR_MAX, if extended
later, will never over 8-bit.
So no need to use 'unsigned int' variables, 'u8' is enough.
Note that the exposed counters in MPTCP_INFO are already limited to
8-bit, same for pm->extra_subflows, and others. So it seems even better
to limit them to 8-bit.
Reviewed-by: Mat Martineau <martineau@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://patch.msgid.link/20250925-net-next-mptcp-c-flag-laminar-v1-13-ad126cc47c6b@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
A few variables linked to the in-kernel Path-Manager are confusing, and
it would help current and future developers, to clarify them.
One of them is 'local_addr_max', which in fact represents the maximum
number of 'subflow' endpoints that can be used to create new subflows,
and not the number of local addresses that have been used to create
subflows.
While at it, add an additional name for the corresponding variable in
MPTCP INFO: mptcpi_endp_subflow_max. Not to break the current uAPI, the
new name is added as a 'define' pointing to the former name. This will
then also help userspace devs.
Also move the variable and function next to the other 'endp_X_max' ones.
No functional changes intended.
Reviewed-by: Geliang Tang <geliang@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://patch.msgid.link/20250925-net-next-mptcp-c-flag-laminar-v1-9-ad126cc47c6b@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
A few variables linked to the in-kernel Path-Manager are confusing, and
it would help current and future developers, to clarify them.
One of them is 'add_addr_accept_max', which in fact represents the limit
of ADD_ADDR that can be accepted: the limit set via 'ip mptcp limit
add_addr_accepted X' for example. It is not linked to the maximum number
of accepted ADD_ADDR.
While at it, add an additional name for the corresponding variable in
MPTCP INFO: mptcpi_limit_add_addr_accepted. Not to break the current
uAPI, the new name is added as a 'define' pointing to the former name.
This will then also help userspace devs.
No functional changes intended.
Reviewed-by: Geliang Tang <geliang@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://patch.msgid.link/20250925-net-next-mptcp-c-flag-laminar-v1-8-ad126cc47c6b@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
A few variables linked to the in-kernel Path-Manager are confusing, and
it would help current and future developers, to clarify them.
One of them is 'add_addr_signal_max', which in fact represents the
maximum number of 'signal' endpoints that can be used to announced
addresses, and not the number of ADD_ADDR that can be signalled.
While at it, add an additional name for the corresponding variable in
MPTCP INFO: mptcpi_endp_signal_max. Not to break the current uAPI, the
new name is added as a 'define' pointing to the former name. This will
then also help userspace devs.
No functional changes intended.
Reviewed-by: Geliang Tang <geliang@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://patch.msgid.link/20250925-net-next-mptcp-c-flag-laminar-v1-7-ad126cc47c6b@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
A few variables linked to the in-kernel Path-Manager are confusing, and
it would help current and future developers, to clarify them.
One of them is 'subflows_max', which in fact represents the limit of
extra subflows: the limit set via 'ip mptcp limit subflows X' for
example. It is not linked to the maximum number of created / possible
subflows.
While at it, add an additional name for the corresponding variable in
MPTCP INFO: mptcpi_limit_extra_subflows. Not to break the current uAPI,
the new name is added as a 'define' pointing to the former name. This
will then also help userspace devs.
No functional changes intended.
Reviewed-by: Geliang Tang <geliang@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://patch.msgid.link/20250925-net-next-mptcp-c-flag-laminar-v1-6-ad126cc47c6b@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
A few variables linked to the Path-Managers are confusing, and it would
help current and future developers, to clarify them.
One of them is 'subflows', which in fact represents the number of extra
subflows: all the additional subflows created after the initial one, and
not the total number of subflows.
While at it, add an additional name for the corresponding variable in
MPTCP INFO: mptcpi_extra_subflows. Not to break the current uAPI, the
new name is added as a 'define' pointing to the former name. This will
then also help userspace devs.
No functional changes intended.
Reviewed-by: Geliang Tang <geliang@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://patch.msgid.link/20250925-net-next-mptcp-c-flag-laminar-v1-5-ad126cc47c6b@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Before this modification, this function was quite long with many levels
of indentations.
Each case can be split in a dedicated function: fullmesh, non-fullmesh.
To remove one level of indentation, msk->pm.subflows >= subflows_max is
now checked after having added one subflow, and stops the loop if it is
no longer possible to add new subflows. This is fine to do this because
this function should only be called if msk->pm.subflows < subflows_max.
No functional changes intended.
Reviewed-by: Geliang Tang <geliang@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://patch.msgid.link/20250925-net-next-mptcp-c-flag-laminar-v1-4-ad126cc47c6b@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The previous commit adds an exception for the C-flag case. The
'mptcp_join.sh' selftest is extended to validate this case.
In this subtest, there is a typical CDN deployment with a client where
MPTCP endpoints have been 'automatically' configured:
- the server set net.mptcp.allow_join_initial_addr_port=0
- the client has multiple 'subflow' endpoints, and the default limits:
not accepting ADD_ADDRs.
Without the parent patch, the client is not able to establish new
subflows using its 'subflow' endpoints. The parent commit fixes that.
The 'Fixes' tag here below is the same as the one from the previous
commit: this patch here is not fixing anything wrong in the selftests,
but it validates the previous fix for an issue introduced by this commit
ID.
Fixes: df377be387 ("mptcp: add deny_join_id0 in mptcp_options_received")
Cc: stable@vger.kernel.org
Reviewed-by: Geliang Tang <geliang@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://patch.msgid.link/20250925-net-next-mptcp-c-flag-laminar-v1-2-ad126cc47c6b@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
When servers set the C-flag in their MP_CAPABLE to tell clients not to
create subflows to the initial address and port, clients will likely not
use their other endpoints. That's because the in-kernel path-manager
uses the 'subflow' endpoints to create subflows only to the initial
address and port.
If the limits have not been modified to accept ADD_ADDR, the client
doesn't try to establish new subflows. If the limits accept ADD_ADDR,
the routing routes will be used to select the source IP.
The C-flag is typically set when the server is operating behind a legacy
Layer 4 load balancer, or using anycast IP address. Clients having their
different 'subflow' endpoints setup, don't end up creating multiple
subflows as expected, and causing some deployment issues.
A special case is then added here: when servers set the C-flag in the
MPC and directly sends an ADD_ADDR, this single ADD_ADDR is accepted.
The 'subflows' endpoints will then be used with this new remote IP and
port. This exception is only allowed when the ADD_ADDR is sent
immediately after the 3WHS, and makes the client switching to the 'fully
established' mode. After that, 'select_local_address()' will not be able
to find any subflows, because 'id_avail_bitmap' will be filled in
mptcp_pm_create_subflow_or_signal_addr(), when switching to 'fully
established' mode.
Fixes: df377be387 ("mptcp: add deny_join_id0 in mptcp_options_received")
Cc: stable@vger.kernel.org
Closes: https://github.com/multipath-tcp/mptcp_net-next/issues/536
Reviewed-by: Geliang Tang <geliang@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://patch.msgid.link/20250925-net-next-mptcp-c-flag-laminar-v1-1-ad126cc47c6b@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Sathesh B Edara says:
====================
Add support to retrieve hardware channel information
This patch series introduces support for retrieving hardware channel
configuration through the ethtool interface for both PF and VF.
====================
Link: https://patch.msgid.link/20250925125134.22421-1-sedara@marvell.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The blamed commit introduced the function lanphy_modify_page_reg which
as name suggests it, it modifies the registers. In the same commit we
have started to use this function inside the drivers. The problem is
that in the function lan8814_config_init we passed the wrong page number
when disabling the aneg towards host side. We passed extended page number
4(LAN8814_PAGE_COMMON_REGS) instead of extended page
5(LAN8814_PAGE_PORT_REGS)
Fixes: a0de636ed7 ("net: phy: micrel: Introduce lanphy_modify_page_reg")
Signed-off-by: Horatiu Vultur <horatiu.vultur@microchip.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20250925064702.3906950-1-horatiu.vultur@microchip.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Introduce a NPU callback to initialize flow stats and remove NPU stats
initialization from airoha_npu_get routine. Add num_stats_entries to
airoha_npu_ppe_stats_setup routine.
This patch makes the code more readable since NPU statistic are now
initialized on demand by the NPU consumer (at the moment NPU statistic
are configured just by the airoha_eth driver).
Moreover this patch allows the NPU consumer (PPE module) to explicitly
enable/disable NPU flow stats.
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20250924-airoha-npu-init-stats-callback-v1-1-88bdf3c941b2@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Vadim Fedorenko says:
====================
add FEC bins histogram report via ethtool
IEEE 802.3ck-2022 defines counters for FEC bins and 802.3df-2024
clarifies it a bit further. Implement reporting interface through as
addition to FEC stats available in ethtool. NetDevSim driver has simple
implementation as an example while mlx5 has much more complex solution.
The example query is the same as usual FEC statistics while the answer
is a bit more verbose:
$ ynl --family ethtool --do fec-get \
--json '{"header":{"dev-index": 10, "flags": 4}}'
{'auto': 0,
'header': {'dev-index': 10, 'dev-name': 'eni10np1'},
'modes': {'bits': {}, 'nomask': True, 'size': 121},
'stats': {'corr-bits': [],
'corrected': [123],
'hist': [{'bin-high': 0,
'bin-low': 0,
'bin-val': 445,
'bin-val-per-lane': [125, 120, 100, 100]},
{'bin-high': 3, 'bin-low': 1, 'bin-val': 12},
{'bin-high': 7,
'bin-low': 4,
'bin-val': 2,
'bin-val-per-lane': [2, 0, 0, 0]}],
'uncorr': [4]}}
====================
Link: https://patch.msgid.link/20250924124037.1508846-1-vadim.fedorenko@linux.dev
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
list_first_entry() never returns NULL — if the list is empty, it still
returns a pointer to an invalid object, leading to potential invalid
memory access when dereferenced.
The calls to list_first_entry() are always guarded by !list_empty(),
which guarantees a valid entry is returned. Therefore, the additional
`if (!p_buffer) break;` checks in qed_ooo_release_connection_isles(),
qed_ooo_release_all_isles(), and qed_ooo_free() are redundant and
unreachable.
Remove the dead code for clarity and consistency with common list
handling patterns in the kernel. No functional change intended.
Signed-off-by: Zhen Ni <zhen.ni@easystack.cn>
Link: https://patch.msgid.link/20250924030219.1252773-1-zhen.ni@easystack.cn
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Théo Lebrun
Jakub Kicinski
Petr Machata
Matthieu Baerts (NGI0)
Sathesh B Edara
Horatiu Vultur
Michael S. Tsirkin
Lorenzo Bianconi
Mohsin Bashir
Mengyuan Lou
Vadim Fedorenko
Carolina Jubran
Zhen Ni
I Viswanath
Dan Carpenter