Fix to avoid cases where the `res` shell variable is
empty in script comparisons.
The comparison has been modified into string comparison to
handle other possible values the variable could assume.
The issue can be reproduced with the command:
make kselftest TARGETS=net
It solves the error:
./tfo_passive.sh: line 98: [: -eq: unary operator expected
Signed-off-by: Alessandro Zanni <alessandro.zanni87@gmail.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20250925132832.9828-1-alessandro.zanni87@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Tony Nguyen says:
====================
idpf: add XSk support
Alexander Lobakin says:
Add support for XSk xmit and receive using libeth_xdp.
This includes adding interfaces to reconfigure/enable/disable only
a particular set of queues and support for checksum offload XSk Tx
metadata.
libeth_xdp's implementation mostly matches the one of ice: batched
allocations and sending, unrolled descriptor writes etc. But unlike
other Intel drivers, XSk wakeup is implemented using CSD/IPI instead
of HW "software interrupt". In lots of different tests, this yielded
way better perf than SW interrupts, but also, this gives better
control over which CPU will handle the NAPI loop (SW interrupts are
a subject to irqbalance and stuff, while CSDs are strictly pinned
1:1 to the core of the same index).
Note that the header split is always disabled for XSk queues, as
for now we see no reasons to have it there.
XSk xmit perf is up to 3x comparing to ice. XSk XDP_PASS is also
faster a bunch as it uses system percpu page_pools, so that the
only overhead left is memcpy(). The rest is at least comparable.
* '200GbE' of git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/next-queue:
idpf: enable XSk features and ndo_xsk_wakeup
idpf: implement Rx path for AF_XDP
idpf: implement XSk xmit
idpf: add XSk pool initialization
idpf: add virtchnl functions to manage selected queues
====================
Link: https://patch.msgid.link/20250924175230.1290529-1-anthony.l.nguyen@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
syzbot reported WARNING in rtl8150_start_xmit/usb_submit_urb.
This is the sequence of events that leads to the warning:
rtl8150_start_xmit() {
netif_stop_queue();
usb_submit_urb(dev->tx_urb);
}
rtl8150_set_multicast() {
netif_stop_queue();
netif_wake_queue(); <-- wakes up TX queue before URB is done
}
rtl8150_start_xmit() {
netif_stop_queue();
usb_submit_urb(dev->tx_urb); <-- double submission
}
rtl8150_set_multicast being the ndo_set_rx_mode callback should not be
calling netif_stop_queue and notif_start_queue as these handle
TX queue synchronization.
The net core function dev_set_rx_mode handles the synchronization
for rtl8150_set_multicast making it safe to remove these locks.
Reported-and-tested-by: syzbot+78cae3f37c62ad092caa@syzkaller.appspotmail.com
Closes: https://syzkaller.appspot.com/bug?extid=78cae3f37c62ad092caa
Fixes: 1da177e4c3 ("Linux-2.6.12-rc2")
Tested-by: Michal Pecio <michal.pecio@gmail.com>
Signed-off-by: I Viswanath <viswanathiyyappan@gmail.com>
Link: https://patch.msgid.link/20250924134350.264597-1-viswanathiyyappan@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Marc Kleine-Budde says:
====================
pull-request: can-next 2025-09-25
this is a pull request of 48 patches for net-next/main, which
supersedes tags/linux-can-next-for-6.18-20250923.
The 1st patch is by Xichao Zhao and converts ns_to_ktime() to
us_to_ktime() in the m_can driver.
Vincent Mailhol contributes 2 patches: Updating the MAINTAINERS and
mailmap files to Vincent's new email address and sorting the includes
in the CAN helper library alphabeticaly.
Stéphane Grosjean's patch modifies all peak CAN drivers and the
mailmap to reflect Stéphane's new email address.
4 patches by Biju Das update the CAN-FD handling in the rcar_canfd
driver.
Followed by 11 patches by Geert Uytterhoeven updating and improving
the rcar_can driver.
Stefan Mätje contributes 2 patches for the esd_usb driver updating the
error messages.
The next 3 patch series are all by Vincent Mailhol: 3 patches to
optimize the size of struct raw_sock and struct uniqframe. 4 patches
which rework the CAN MTU logic as preparation for CAN-XL interfaces.
And finally 20 patches that prepare and refactor the CAN netlink code
for the upcoming CAN-XL support.
* tag 'linux-can-next-for-6.18-20250924' of git://git.kernel.org/pub/scm/linux/kernel/git/mkl/linux-can-next: (48 commits)
can: netlink: add userland error messages
can: dev: add can_get_ctrlmode_str()
can: calc_bittiming: make can_calc_tdco() FD agnostic
can: netlink: make can_tdc_fill_info() FD agnostic
can: netlink: add can_bitrate_const_fill_info()
can: netlink: add can_bittiming_const_fill_info()
can: netlink: add can_bittiming_fill_info()
can: netlink: add can_data_bittiming_get_size()
can: netlink: make can_tdc_get_size() FD agnostic
can: netlink: add can_ctrlmode_changelink()
can: netlink: add can_dtb_changelink()
can: netlink: make can_tdc_changelink() FD agnostic
can: netlink: remove useless check in can_tdc_changelink()
can: netlink: refactor CAN_CTRLMODE_TDC_{AUTO,MANUAL} flag reset logic
can: netlink: add can_validate_databittiming()
can: netlink: add can_validate_tdc()
can: netlink: refactor can_validate_bittiming()
can: netlink: document which symbols are FD specific
can: dev: make can_get_relative_tdco() FD agnostic and move it to bittiming.h
can: dev: move struct data_bittiming_params to linux/can/bittiming.h
...
====================
Link: https://patch.msgid.link/20250925121332.848157-1-mkl@pengutronix.de
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Steffen Klassert says:
====================
pull request (net-next): ipsec-next 2025-09-26
1) Fix field-spanning memcpy warning in AH output.
From Charalampos Mitrodimas.
2) Replace the strcpy() calls for alg_name by strscpy().
From Miguel García.
* tag 'ipsec-next-2025-09-26' of git://git.kernel.org/pub/scm/linux/kernel/git/klassert/ipsec-next:
xfrm: xfrm_user: use strscpy() for alg_name
net: ipv6: fix field-spanning memcpy warning in AH output
====================
Link: https://patch.msgid.link/20250926053025.2242061-1-steffen.klassert@secunet.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Pull RISC-V fixes from Paul Walmsley:
- A race-free implementation of pudp_huge_get_and_clear() (based on the
x86 code)
- A MAINTAINERS update to my E-mail address
* tag 'riscv-for-linus-v6.17-rc8' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux:
MAINTAINERS: Update Paul Walmsley's E-mail address
riscv: Use an atomic xchg in pudp_huge_get_and_clear()
Convert the NVIDIA GPU binding to DT schema format.
Add undocumented "interconnects" and "interconnect-names" properties for
gp10b and gv11b. Drop all but one example.
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
Johannes Berg says:
====================
Quite a bit more things, including pull requests from drivers:
- mt76: MLO support, HW restart improvements
- rtw88/89: small features, prep for RTL8922DE support
- ath10k: GTK rekey fixes
- cfg80211/mac80211:
- additions for more NAN support
- S1G channel representation cleanup
* tag 'wireless-next-2025-09-25' of https://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless-next: (167 commits)
wifi: libertas: add WQ_UNBOUND to alloc_workqueue users
Revert "wifi: libertas: WQ_PERCPU added to alloc_workqueue users"
wifi: libertas: WQ_PERCPU added to alloc_workqueue users
wifi: cfg80211: fix width unit in cfg80211_radio_chandef_valid()
wifi: ath11k: HAL SRNG: don't deinitialize and re-initialize again
wifi: ath12k: enforce CPU endian format for all QMI data
wifi: ath12k: Use 1KB Cache Flush Command for QoS TID Descriptors
wifi: ath12k: Fix flush cache failure during RX queue update
wifi: ath12k: Add Retry Mechanism for REO RX Queue Update Failures
wifi: ath12k: Refactor REO command to use ath12k_dp_rx_tid_rxq
wifi: ath12k: Refactor RX TID buffer cleanup into helper function
wifi: ath12k: Refactor RX TID deletion handling into helper function
wifi: ath12k: Increase DP_REO_CMD_RING_SIZE to 256
wifi: cfg80211: remove IEEE80211_CHAN_{1,2,4,8,16}MHZ flags
wifi: rtw89: avoid circular locking dependency in ser_state_run()
wifi: rtw89: fix leak in rtw89_core_send_nullfunc()
wifi: rtw89: avoid possible TX wait initialization race
wifi: rtw89: fix use-after-free in rtw89_core_tx_kick_off_and_wait()
wifi: ath12k: Fix peer lookup in ath12k_dp_mon_rx_deliver_msdu()
wifi: mac80211: fix Rx packet handling when pubsta information is not available
...
====================
Link: https://patch.msgid.link/20250925232341.4544-3-johannes@sipsolutions.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Before disabling SR-IOV via config space accesses to the parent PF,
sriov_disable() first removes the PCI devices representing the VFs.
Since commit 9d16947b75 ("PCI: Add global pci_lock_rescan_remove()")
such removal operations are serialized against concurrent remove and
rescan using the pci_rescan_remove_lock. No such locking was ever added
in sriov_disable() however. In particular when commit 18f9e9d150
("PCI/IOV: Factor out sriov_add_vfs()") factored out the PCI device
removal into sriov_del_vfs() there was still no locking around the
pci_iov_remove_virtfn() calls.
On s390 the lack of serialization in sriov_disable() may cause double
remove and list corruption with the below (amended) trace being observed:
PSW: 0704c00180000000 0000000c914e4b38 (klist_put+56)
GPRS: 000003800313fb48 0000000000000000 0000000100000001 0000000000000001
00000000f9b520a8 0000000000000000 0000000000002fbd 00000000f4cc9480
0000000000000001 0000000000000000 0000000000000000 0000000180692828
00000000818e8000 000003800313fe2c 000003800313fb20 000003800313fad8
#0 [3800313fb20] device_del at c9158ad5c
#1 [3800313fb88] pci_remove_bus_device at c915105ba
#2 [3800313fbd0] pci_iov_remove_virtfn at c9152f198
#3 [3800313fc28] zpci_iov_remove_virtfn at c90fb67c0
#4 [3800313fc60] zpci_bus_remove_device at c90fb6104
#5 [3800313fca0] __zpci_event_availability at c90fb3dca
#6 [3800313fd08] chsc_process_sei_nt0 at c918fe4a2
#7 [3800313fd60] crw_collect_info at c91905822
#8 [3800313fe10] kthread at c90feb390
#9 [3800313fe68] __ret_from_fork at c90f6aa64
#10 [3800313fe98] ret_from_fork at c9194f3f2.
This is because in addition to sriov_disable() removing the VFs, the
platform also generates hot-unplug events for the VFs. This being the
reverse operation to the hotplug events generated by sriov_enable() and
handled via pdev->no_vf_scan. And while the event processing takes
pci_rescan_remove_lock and checks whether the struct pci_dev still exists,
the lack of synchronization makes this checking racy.
Other races may also be possible of course though given that this lack of
locking persisted so long observable races seem very rare. Even on s390 the
list corruption was only observed with certain devices since the platform
events are only triggered by config accesses after the removal, so as long
as the removal finished synchronously they would not race. Either way the
locking is missing so fix this by adding it to the sriov_del_vfs() helper.
Just like PCI rescan-remove, locking is also missing in sriov_add_vfs()
including for the error case where pci_stop_and_remove_bus_device() is
called without the PCI rescan-remove lock being held. Even in the non-error
case, adding new PCI devices and buses should be serialized via the PCI
rescan-remove lock. Add the necessary locking.
Fixes: 18f9e9d150 ("PCI/IOV: Factor out sriov_add_vfs()")
Signed-off-by: Niklas Schnelle <schnelle@linux.ibm.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Benjamin Block <bblock@linux.ibm.com>
Reviewed-by: Farhan Ali <alifm@linux.ibm.com>
Reviewed-by: Julian Ruess <julianr@linux.ibm.com>
Cc: stable@vger.kernel.org
Link: https://patch.msgid.link/20250826-pci_fix_sriov_disable-v1-1-2d0bc938f2a3@linux.ibm.com
Fix a verification failure. filter_udphdr() calls bpf_xdp_pull_data(),
which will invalidate all pkt pointers. Therefore, all ctx->data loaded
before filter_udphdr() cannot be used. Reload it to prevent verification
errors.
The error may not appear on some compiler versions if they decide to
load ctx->data after filter_udphdr() when it is first used.
Fixes: efec2e55bd ("selftests: drv-net: Pull data before parsing headers")
Signed-off-by: Amery Hung <ameryhung@gmail.com>
Acked-by: Martin KaFai Lau <martin.lau@kernel.org>
Link: https://patch.msgid.link/20250925161452.1290694-1-ameryhung@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Update vendor-prefixes.yaml to allow property names without a prefix
to contain '#' character in all positions
Signed-off-by: Kael D'Alcamo <dev@kael-k.io>
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
Convert megachips-stdpxxxx-ge-b850v3-fw.txt to yaml format.
Additional changes:
- Only keep one example.
Signed-off-by: Frank Li <Frank.Li@nxp.com>
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
Instead of using auxiliary boolean that tracks if we are at first frag
when gathering all elements of skb, same functionality can be achieved
with checking if skb_shared_info::nr_frags is 0.
Remove @first_frag but be careful around xsk_build_skb_zerocopy() and
NULL the skb pointer when it failed so that common error path does not
incorrectly interpret it during decision whether to call kfree_skb().
Signed-off-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com>
Acked-by: Stanislav Fomichev <sdf@fomichev.me>
Reviewed-by: Jason Xing <kerneljasonxing@gmail.com>
Acked-by: Martin KaFai Lau <martin.lau@kernel.org>
Link: https://patch.msgid.link/20250925160009.2474816-3-maciej.fijalkowski@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Pull x86 fixes from Ingo Molnar:
"Fix a CPU topology code regression that caused the mishandling of
certain boot command line options, and re-enable CONFIG_PTDUMP on i386
that was mistakenly turned off in the Kconfig"
* tag 'x86-urgent-2025-09-26' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/topology: Implement topology_is_core_online() to address SMT regression
x86/Kconfig: Reenable PTDUMP on i386
When a module registers a struct_ops, the struct_ops type and its
corresponding map_value type ("bpf_struct_ops_") may reside in different
btf objects, here are four possible case:
+--------+---------------+-------------+---------------------------------+
| |bpf_struct_ops_| xxx_ops | |
+--------+---------------+-------------+---------------------------------+
| case 0 | btf_vmlinux | btf_vmlinux | be used and reg only in vmlinux |
+--------+---------------+-------------+---------------------------------+
| case 1 | btf_vmlinux | mod_btf | INVALID |
+--------+---------------+-------------+---------------------------------+
| case 2 | mod_btf | btf_vmlinux | reg in mod but be used both in |
| | | | vmlinux and mod. |
+--------+---------------+-------------+---------------------------------+
| case 3 | mod_btf | mod_btf | be used and reg only in mod |
+--------+---------------+-------------+---------------------------------+
Currently we figure out the mod_btf by searching with the struct_ops type,
which makes it impossible to figure out the mod_btf when the struct_ops
type is in btf_vmlinux while it's corresponding map_value type is in
mod_btf (case 2).
The fix is to use the corresponding map_value type ("bpf_struct_ops_")
as the lookup anchor instead of the struct_ops type to figure out the
`btf` and `mod_btf` via find_ksym_btf_id(), and then we can locate
the kern_type_id via btf__find_by_name_kind() with the `btf` we just
obtained from find_ksym_btf_id().
With this change the lookup obtains the correct btf and mod_btf for case 2,
preserves correct behavior for other valid cases, and still fails as
expected for the invalid scenario (case 1).
Fixes: 590a008882 ("bpf: libbpf: Add STRUCT_OPS support")
Signed-off-by: D. Wythe <alibuda@linux.alibaba.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: Martin KaFai Lau <martin.lau@kernel.org>
Link: https://lore.kernel.org/bpf/20250926071751.108293-1-alibuda@linux.alibaba.com
Merge updates of thermal drivers for 6.18-rc1 from Daniel Lezcano:
"- Add the QCS615 compatible DT bindings for QCom platforms (Gaurav
Kohli)
- Support fallback trimming values when the fuse is empty in the R-Car
driver (Marek Vasut)
- Remove unneeded semicolon in the Mediatek LVTS driver (Jiapeng
Chong)
- Fix the LMH Kconfig option by selecting QCOM_SCM and take the
opportunity to add the COMPILE_TEST option for the QCom's LMH
feature (Dmitry Baryshkov)
- Fix the missing includes and incorrect error message in the Qcom's
LMH driver (Dmitry Baryshkov)
- Fix comment typo and add the documentation in the Kconfig for the
R-Car Gen3 and Gen4 (Marek Vasut)
- Add Tegra114 SOCTHERM support (Svyatoslav Ryhel)
- Rename the functions name in the driver to be consistent and generic
with the different R-Car platform variants (Wolfram Sang)
- Register the TI K3 J72xx bandgap sensor as a hwmon sensor too
(Michael Walle)
- Add and document the thermal sensor unit reporting the junction
temperature of the RZ/G3S SoC (Claudiu Beznea)
- Support the GRF in the Rockchip driver (Sebastian Reichel)
- Add a temperature IIO sensor channel in the generic thermal ADC
driver (Svyatoslav Ryhel)
- Document the temperature sensor on the QCOM's Glymur platform (Manaf
Meethalavalappu)
- Add and document the thermal sensor unit reporting the junction
temperature of the RZ/G3E SoC (John Madieu)"
* tag 'thermal-v6.18-rc1' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/thermal/linux: (24 commits)
dt-bindings: thermal: qcom-tsens: Document the Glymur temperature Sensor
thermal/drivers/renesas/rzg3e: Add thermal driver for the Renesas RZ/G3E SoC
dt-bindings: thermal: r9a09g047-tsu: Document the TSU unit
thermal/drivers/thermal-generic-adc: Add temperature sensor channel
dt-bindings: thermal: rockchip: Tighten grf requirements
thermal/drivers/rockchip: Shut up GRF warning
thermal/drivers/rockchip: Unify struct rockchip_tsadc_chip format
thermal/drivers/renesas/rzg3s: Add thermal driver for the Renesas RZ/G3S SoC
dt-bindings: thermal: r9a08g045-tsu: Document the TSU unit
thermal/drivers/k3_j72xx_bandgap: Register sensors with hwmon
thermal/drivers/rcar_gen3: Fix mapping SoCs to generic Gen4 entry
thermal/drivers/tegra: Add Tegra114 specific SOCTHERM driver
dt-bindings: thermal: add Tegra114 soctherm header
thermal/drivers/tegra/soctherm-fuse: Prepare calibration for Tegra114 support
dt-bindings: thermal: Document Tegra114 SOCTHERM Thermal Management System
thermal/drivers/rcar_gen3: Document Gen4 support in Kconfig entry
thermal/drivers/rcar_gen3: Fix comment typo
drivers/thermal/qcom/lmh: Fix incorrect error message
thermal/drivers/qcom/lmh: Add missing IRQ includes
thermal/drivers/qcom: Make LMH select QCOM_SCM
...
1fcc67e3a3 ("of: base: Add for_each_child_of_node_with_prefix()") added
of_get_next_child_with_prefix() but did not add a stub for the !CONFIG_OF
case.
Add a of_get_next_child_with_prefix() stub so users of
for_each_child_of_node_with_prefix() can be built for compile testing even
when !CONFIG_OF.
Fixes: 1fcc67e3a3 ("of: base: Add for_each_child_of_node_with_prefix()")
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
Add compatible string synaptics,synaptics_i2c for synaptics touch pad. It
match existed driver drivers/input/mouse/synaptics_i2c.c.
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Frank Li <Frank.Li@nxp.com>
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
Currently, the DT bindings for Mediatek PMIC Wrapper is missing the
power-domains property, which is used in the MT8173 E1 evaluation board as
it needs USB power domain.
Signed-off-by: Ariel D'Alessandro <ariel.dalessandro@collabora.com>
Acked-by: Rob Herring (Arm) <robh@kernel.org>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
Update the mediatek,audsys binding to support the mt8183-audiosys
compatible, which uses a different audio controller
(mediatek,mt8183-audio.yaml) compared to the legacy mt2701-audio
controller.
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Reviewed-by: Rob Herring (Arm) <robh@kernel.org>
Signed-off-by: Julien Massot <julien.massot@collabora.com>
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
The GCE Mailbox needs only one clock and the clock-names can be
used only by the driver (which, for instance, does not use it),
and this is true for all of the currently supported MediaTek SoCs.
Stop requiring to specify clock-names on all non-MT8195 GCEs.
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Reviewed-by: Matthias Brugger <matthias.bgg@gmail.com>
Acked-by: Rob Herring (Arm) <robh@kernel.org>
Reviewed-by: Chen-Yu Tsai <wenst@chromium.org>
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
This binding had no compatible and for this reason would not be
applied to anything: add the missing "mediatek,mt6331-regulator"
comaptible.
Fixes: 6385e21692 ("regulator: Add bindings for MT6331 regulator")
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Acked-by: Rob Herring (Arm) <robh@kernel.org>
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
This binding was never applied to anything because it misses the
compatible, hence any mistake in it got unnoticed.
Before adding the compatible to let it apply, fix the names and
the node names of various regulators.
Fixes: 6385e21692 ("regulator: Add bindings for MT6331 regulator")
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Acked-by: Rob Herring (Arm) <robh@kernel.org>
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
This binding had no compatible and for this reason would not be
applied to anything: add the missing "mediatek,mt6332-regulator"
compatible.
Fixes: e22943e32e regulator: ("Add bindings for MT6332 regulator")
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Acked-by: Rob Herring (Arm) <robh@kernel.org>
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
The pin controller for both MT7622 and MT7629 need both a "base"
and an "eint" MMIO like the ones found on other MediaTek SoCs:
while devicetrees have always been correct, the binding is not,
as it only allows an "eint" reg.
Add "base" to reg-names and increment maxItems for reg to two.
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
Alessandro Zanni
Jakub Kicinski
Bagas Sanjaya
Michael S. Tsirkin
Jonas Rebmann
Christophe Leroy
I Viswanath
Dan Carpenter
Geert Uytterhoeven
Claudiu Manoil
Linus Torvalds
Rob Herring (Arm)
Stanislav Fomichev
Qiang Yu
Konrad Dybcio
Niklas Schnelle
Robert Marko
Amery Hung
Kael D'Alcamo
Frank Li
Markus Heidelberg
Maciej Fijalkowski
D. Wythe
Rafael J. Wysocki
Bjorn Helgaas
Ariel D'Alessandro
Julien Massot
AngeloGioacchino Del Regno