[ Upstream commit 3d3e28feca ]
Occasionally there is an EPROTO error during firmware download.
This error is converted to EAGAIN in the download function.
But nobody tries again and so device probe fails.
Implement download retry to fix this.
This error was observed (and fix tested) on a tbs2910 board [1]
with an embedded RTL8188EU (0bda:8179) device behind a USB hub.
[1] arch/arm/boot/dts/nxp/imx/imx6q-tbs2910.dts
Signed-off-by: Soeren Moch <smoch@web.de>
Acked-by: Ping-Ke Shih <pkshih@realtek.com>
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Link: https://patch.msgid.link/20250127194828.599379-1-smoch@web.de
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit f6f73b891b ]
Refactor rzg2l_cpg_attach_dev to delegate clock validation for Runtime PM
to the updated rzg2l_cpg_is_pm_clk function. Ensure validation of clocks
associated with the power domain while excluding external and core clocks.
Prevent incorrect Runtime PM management for clocks outside the domain's
scope.
Update rzg2l_cpg_is_pm_clk to operate on a per-power-domain basis. Verify
clkspec.np against the domain's device node, check argument validity, and
validate clock type (CPG_MOD). Use the no_pm_mod_clks array to exclude
specific clocks from PM management.
Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/20241216210201.239855-1-prabhakar.mahadev-lad.rj@bp.renesas.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 598bdf4fef ]
Instead of using standard perf_event_attr->freq=0 and ->sample_period
fields, IBS event in 'sample period mode' can also be opened by setting
period value directly in perf_event_attr->config in a MaxCnt bit-field
format.
IBS OP MaxCnt bits are defined as:
(high bits) IbsOpCtl[26:20] = IbsOpMaxCnt[26:20]
(low bits) IbsOpCtl[15:0] = IbsOpMaxCnt[19:4]
Perf event sample period can be derived from MaxCnt bits as:
sample_period = (high bits) | ((low_bits) << 4);
However, current code just masks MaxCnt bits and shifts all of them,
including high bits, which is incorrect. Fix it.
Signed-off-by: Ravi Bangoria <ravi.bangoria@amd.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Acked-by: Namhyung Kim <namhyung@kernel.org>
Link: https://lkml.kernel.org/r/20250115054438.1021-4-ravi.bangoria@amd.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 46dcf85566 ]
IBS Op uses two counters: MaxCnt and CurCnt. MaxCnt is programmed with
the desired sample period. IBS hw generates sample when CurCnt reaches
to MaxCnt. The size of these counter used to be 20 bits but later they
were extended to 27 bits. The 7 bit extension is indicated by CPUID
Fn8000_001B_EAX[6 / OpCntExt].
perf_ibs->cnt_mask variable contains bit masks for MaxCnt and CurCnt.
But IBS driver does not set upper 7 bits of CurCnt in cnt_mask even
when OpCntExt CPUID bit is set. Fix this.
IBS driver uses cnt_mask[CurCnt] bits only while disabling an event.
Fortunately, CurCnt bits are not read from MSR while re-enabling the
event, instead MaxCnt is programmed with desired period and CurCnt is
set to 0. Hence, we did not see any issues so far.
Signed-off-by: Ravi Bangoria <ravi.bangoria@amd.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Acked-by: Namhyung Kim <namhyung@kernel.org>
Link: https://lkml.kernel.org/r/20250115054438.1021-5-ravi.bangoria@amd.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 21ee965267 ]
Currently in scmi_protocol_device_request(), no duplicate scmi device
name is allowed across any protocol. However scmi_dev_match_id() first
matches the protocol id and then the name. So, there is no strict
requirement to keep this scmi device name unique across all the protocols.
Relax the constraint on the duplicate name across the protocols and
inhibit only within the same protocol id.
Message-Id: <20250131141822.514342-1-sudeep.holla@arm.com>
Reviewed-by: Dhruva Gole <d-gole@ti.com>
Reviewed-by: Peng Fan <peng.fan@nxp.com>
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 0053f7d39d ]
The `readlink(path, buf, sizeof(buf))` call reads at most sizeof(buf)
bytes and *does not* append null-terminator to buf. With respect to
that, fix two pieces in get_fd_type:
1. Change the truncation check to contain sizeof(buf) rather than
sizeof(path).
2. Append null-terminator to buf.
Reported by Coverity.
Signed-off-by: Viktor Malik <vmalik@redhat.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Reviewed-by: Quentin Monnet <qmo@kernel.org>
Link: https://lore.kernel.org/bpf/20250129071857.75182-1-vmalik@redhat.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 12fdd29d5d ]
In commit 1611603537 ("bpf: Create argument information for nullable arguments."),
it introduced a "__nullable" tagging at the argument name of a
stub function. Some background on the commit:
it requires to tag the stub function instead of directly tagging
the "ops" of a struct. This is because the btf func_proto of the "ops"
does not have the argument name and the "__nullable" is tagged at
the argument name.
To find the stub function of a "ops", it currently relies on a naming
convention on the stub function "st_ops__ops_name".
e.g. tcp_congestion_ops__ssthresh. However, the new kernel
sub system implementing bpf_struct_ops have missed this and
have been surprised that the "__nullable" and the to-be-landed
"__ref" tagging was not effective.
One option would be to give a warning whenever the stub function does
not follow the naming convention, regardless if it requires arg tagging
or not.
Instead, this patch uses the kallsyms_lookup approach and removes
the requirement on the naming convention. The st_ops->cfi_stubs has
all the stub function kernel addresses. kallsyms_lookup() is used to
lookup the function name. With the function name, BTF can be used to
find the BTF func_proto. The existing "__nullable" arg name searching
logic will then fall through.
One notable change is,
if it failed in kallsyms_lookup or it failed in looking up the stub
function name from the BTF, the bpf_struct_ops registration will fail.
This is different from the previous behavior that it silently ignored
the "st_ops__ops_name" function not found error.
The "tcp_congestion_ops", "sched_ext_ops", and "hid_bpf_ops" can still be
registered successfully after this patch. There is struct_ops_maybe_null
selftest to cover the "__nullable" tagging.
Other minor changes:
1. Removed the "%s__%s" format from the pr_warn because the naming
convention is removed.
2. The existing bpf_struct_ops_supported() is also moved earlier
because prepare_arg_info needs to use it to decide if the
stub function is NULL before calling the prepare_arg_info.
Cc: Tejun Heo <tj@kernel.org>
Cc: Benjamin Tissoires <bentiss@kernel.org>
Cc: Yonghong Song <yonghong.song@linux.dev>
Cc: Amery Hung <ameryhung@gmail.com>
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
Reviewed-by: Amery Hung <ameryhung@gmail.com>
Link: https://lore.kernel.org/r/20250127222719.2544255-1-martin.lau@linux.dev
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit c81202906b ]
The ast driver looks up supplied display modes from an internal list of
display modes supported by the VBIOS.
Do not use the crtc_-prefixed display values from struct drm_display_mode
for looking up the VBIOS mode. The fields contain raw values that the
driver programs to hardware. They are affected by display settings like
double-scan or interlace.
Instead use the regular vdisplay and hdisplay fields for lookup. As the
programmed values can now differ from the values used for lookup, set
struct drm_display_mode.crtc_vdisplay and .crtc_hdisplay from the VBIOS
mode.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Jocelyn Falempe <jfalempe@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250131092257.115596-9-tzimmermann@suse.de
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 3280c9313c ]
Also remove MODULE_NAME and a BUG_ON check, both unneeded.
This fixes a warning about string truncation in snprintf that
will never happen in practice:
drivers/md/dm-vdo/vdo.c: In function ‘vdo_make’:
drivers/md/dm-vdo/vdo.c:564:5: error: ‘%s’ directive output may be truncated writing up to 55 bytes into a region of size 16 [-Werror=format-truncation=]
"%s%u", MODULE_NAME, instance);
^~
drivers/md/dm-vdo/vdo.c:563:2: note: ‘snprintf’ output between 2 and 66 bytes into a destination of size 16
snprintf(vdo->thread_name_prefix, sizeof(vdo->thread_name_prefix),
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
"%s%u", MODULE_NAME, instance);
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Reported-by: John Garry <john.g.garry@oracle.com>
Reviewed-by: John Garry <john.g.garry@oracle.com>
Signed-off-by: Matthew Sakai <msakai@redhat.com>
Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit f4e99b846c ]
Fix array initialization that triggers a warning:
error: initializer-string for array of ‘unsigned char’ is too long
[-Werror=unterminated-string-initialization]
Signed-off-by: Chung Chung <cchung@redhat.com>
Signed-off-by: Matthew Sakai <msakai@redhat.com>
Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit b93afe8a3a ]
RISC-V APLIC specification defines "hart index" in:
https://github.com/riscv/riscv-aia
Within a given interrupt domain, each of the domain’s harts has a unique
index number in the range 0 to 2^14 − 1 (= 16,383). The index number a
domain associates with a hart may or may not have any relationship to the
unique hart identifier (“hart ID”) that the RISC-V Privileged Architecture
assigns to the hart. Two different interrupt domains may employ entirely
different index numbers for the same set of harts.
Further, this document says in "4.5 Memory-mapped control region for an
interrupt domain":
The array of IDC structures may include some for potential hart index
numbers that are not actual hart index numbers in the domain. For example,
the first IDC structure is always for hart index 0, but 0 is not
necessarily a valid index number for any hart in the domain.
Support arbitrary hart indices specified in an optional APLIC property
"riscv,hart-indexes" which is specified as an array of u32 elements, one
per interrupt target. If this property is not specified, fallback to use
logical hart indices within the domain.
Signed-off-by: Vladimir Kondratiev <vladimir.kondratiev@mobileye.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Anup Patel <anup@brainfault.org>
Link: https://lore.kernel.org/all/20250129091637.1667279-3-vladimir.kondratiev@mobileye.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit d73a4bfa28 ]
Since "LED_KANA" was defined as "0x04", the shift number should be "4".
Signed-off-by: junan <junan76@163.com>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 268c73d470 ]
In case of MHI error a reset work will be queued which will try
napi_disable() after napi_synchronize().
As the napi will be only enabled after qmi_firmware_ready event,
trying napi_synchronize() before napi_enable() will result in
indefinite sleep in case of a firmware crash in QMI init sequence.
To avoid this, introduce napi_enabled flag to check if napi is enabled
or not before calling napi_synchronize().
Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.3.1-00173-QCAHKSWPL_SILICONZ-1
Signed-off-by: Avula Sri Charan <quic_asrichar@quicinc.com>
Signed-off-by: Tamizh Chelvam Raja <quic_tamizhr@quicinc.com>
Reviewed-by: Aditya Kumar Singh <aditya.kumar.singh@oss.qualcomm.com>
Link: https://patch.msgid.link/20250124090058.3194299-1-quic_tamizhr@quicinc.com
Signed-off-by: Jeff Johnson <jeff.johnson@oss.qualcomm.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 7081dc75df ]
Some of the allowed operations put the tape into a known position to
continue operation assuming only the tape position has changed. But reset
sets partition, density and block size to drive default values. These
should be restored to the values before reset.
Normally the current block size and density are stored by the drive. If
the settings have been changed, the changed values have to be saved by the
driver across reset.
Signed-off-by: Kai Mäkisara <Kai.Makisara@kolumbus.fi>
Link: https://lore.kernel.org/r/20250120194925.44432-2-Kai.Makisara@kolumbus.fi
Reviewed-by: John Meneghini <jmeneghi@redhat.com>
Tested-by: John Meneghini <jmeneghi@redhat.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 23ed628977 ]
With repeated port swaps between separate fabrics, there can be multiple
registrations for fabric well known address 0xfffffe. This can cause ndlp
reference confusion due to the usage of a single ndlp ptr that stores the
rport object in fc_rport struct private storage during transport
registration. Subsequent registrations update the ndlp->rport field with
the newer rport, so when transport layer triggers dev_loss_tmo for the
earlier registered rport the ndlp->rport private storage is referencing the
newer rport instead of the older rport in dev_loss_tmo callbk.
Because the older ndlp->rport object is already cleaned up elsewhere in
driver code during the time of fabric swap, check that the rport provided
in dev_loss_tmo callbk actually matches the rport stored in the LLDD's
ndlp->rport field. Otherwise, skip dev_loss_tmo work on a stale rport.
Signed-off-by: Justin Tee <justin.tee@broadcom.com>
Link: https://lore.kernel.org/r/20250131000524.163662-4-justintee8345@gmail.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 56c3d809b7 ]
After a port swap between separate fabrics, there may be multiple nodes in
the vport's fc_nodes list with the same fabric well known address.
Duplication is temporary and eventually resolves itself after dev_loss_tmo
expires, but nameserver queries may still occur before dev_loss_tmo. This
possibly results in returning stale fabric ndlp objects. Fix by adding an
nlp_state check to ensure the ndlp search routine returns the correct newer
allocated ndlp fabric object.
Signed-off-by: Justin Tee <justin.tee@broadcom.com>
Link: https://lore.kernel.org/r/20250131000524.163662-5-justintee8345@gmail.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 78d5d1e20d ]
VFs use a relay transaction during the resume/reset flow and use
of the GFP_KERNEL flag may conflict with the reclaim:
-> #0 (fs_reclaim){+.+.}-{0:0}:
[ ] __lock_acquire+0x1874/0x2bc0
[ ] lock_acquire+0xd2/0x310
[ ] fs_reclaim_acquire+0xc5/0x100
[ ] mempool_alloc_noprof+0x5c/0x1b0
[ ] __relay_get_transaction+0xdc/0xa10 [xe]
[ ] relay_send_to+0x251/0xe50 [xe]
[ ] xe_guc_relay_send_to_pf+0x79/0x3a0 [xe]
[ ] xe_gt_sriov_vf_connect+0x90/0x4d0 [xe]
[ ] xe_uc_init_hw+0x157/0x3b0 [xe]
[ ] do_gt_restart+0x1ae/0x650 [xe]
[ ] xe_gt_resume+0xb6/0x120 [xe]
[ ] xe_pm_runtime_resume+0x15b/0x370 [xe]
[ ] xe_pci_runtime_resume+0x73/0x90 [xe]
[ ] pci_pm_runtime_resume+0xa0/0x100
[ ] __rpm_callback+0x4d/0x170
[ ] rpm_callback+0x64/0x70
[ ] rpm_resume+0x594/0x790
[ ] __pm_runtime_resume+0x4e/0x90
[ ] xe_pm_runtime_get_ioctl+0x9c/0x160 [xe]
Since we have a preallocated pool of relay transactions, which
should cover all our normal relay use cases, we may use the
GFP_NOWAIT flag when allocating new outgoing transactions.
Signed-off-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Tested-by: Marcin Bernatowicz <marcin.bernatowicz@linux.intel.com>
Reviewed-by: Marcin Bernatowicz <marcin.bernatowicz@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250131153713.808-1-michal.wajdeczko@intel.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 8ce939a0fa ]
The event may have been updated in the PMU-specific implementation,
e.g., Intel PEBS counters snapshotting. The common code should not
read and overwrite the value.
The PERF_SAMPLE_READ in the data->sample_type can be used to detect
whether the PMU-specific value is available. If yes, avoid the
pmu->read() in the common code. Add a new flag, skip_read, to track the
case.
Factor out a perf_pmu_read() to clean up the code.
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Kan Liang <kan.liang@linux.intel.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lkml.kernel.org/r/20250121152303.3128733-3-kan.liang@linux.intel.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit ad6b5b73ff ]
rcu_all_qs() is defined for !CONFIG_PREEMPT_RCU but the declaration
is conditioned on CONFIG_PREEMPTION.
With CONFIG_PREEMPT_LAZY, CONFIG_PREEMPTION=y does not imply
CONFIG_PREEMPT_RCU=y.
Decouple the two.
Cc: Paul E. McKenney <paulmck@kernel.org>
Reviewed-by: Frederic Weisbecker <frederic@kernel.org>
Reviewed-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: Ankur Arora <ankur.a.arora@oracle.com>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Signed-off-by: Boqun Feng <boqun.feng@gmail.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit fcf0e25ad4 ]
rcu_read_unlock_strict() can be called with preemption enabled
which can make for an unstable rdp and a racy norm value.
Fix this by dropping the preempt-count in __rcu_read_unlock()
after the call to rcu_read_unlock_strict(), adjusting the
preempt-count check appropriately.
Suggested-by: Frederic Weisbecker <frederic@kernel.org>
Signed-off-by: Ankur Arora <ankur.a.arora@oracle.com>
Reviewed-by: Frederic Weisbecker <frederic@kernel.org>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Signed-off-by: Boqun Feng <boqun.feng@gmail.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 83b28cfe79 ]
With PREEMPT_RCU=n, cond_resched() provides urgently needed quiescent
states for read-side critical sections via rcu_all_qs().
One reason why this was needed: lacking preempt-count, the tick
handler has no way of knowing whether it is executing in a
read-side critical section or not.
With (PREEMPT_LAZY=y, PREEMPT_DYNAMIC=n), we get (PREEMPT_COUNT=y,
PREEMPT_RCU=n). In this configuration cond_resched() is a stub and
does not provide quiescent states via rcu_all_qs().
(PREEMPT_RCU=y provides this information via rcu_read_unlock() and
its nesting counter.)
So, use the availability of preempt_count() to report quiescent states
in rcu_flavor_sched_clock_irq().
Suggested-by: Paul E. McKenney <paulmck@kernel.org>
Reviewed-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: Ankur Arora <ankur.a.arora@oracle.com>
Reviewed-by: Frederic Weisbecker <frederic@kernel.org>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Signed-off-by: Boqun Feng <boqun.feng@gmail.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit a8c2d3932c ]
It can be needed to have some MSI-X allocated as static and rest as
dynamic. For example on PF VSI. We want to always have minimum one MSI-X
on it, because of that it is allocated as a static one, rest can be
dynamic if it is supported.
Change the ice_get_irq_res() to allow using static entries if they are
free even if caller wants dynamic one.
Adjust limit values to the new approach. Min and max in limit means the
values that are valid, so decrease max and num_static by one.
Set vsi::irq_dyn_alloc if dynamic allocation is supported.
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Reviewed-by: Wojciech Drewek <wojciech.drewek@intel.com>
Tested-by: Pucha Himasekhar Reddy <himasekharx.reddy.pucha@intel.com>
Signed-off-by: Michal Swiatkowski <michal.swiatkowski@linux.intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit d9e9f6d7b7 ]
Attempts to replace an MDB group membership of the host itself are
currently bounced:
# ip link add name br up type bridge vlan_filtering 1
# bridge mdb replace dev br port br grp 239.0.0.1 vid 2
# bridge mdb replace dev br port br grp 239.0.0.1 vid 2
Error: bridge: Group is already joined by host.
A similar operation done on a member port would succeed. Ignore the check
for replacement of host group memberships as well.
The bit of code that this enables is br_multicast_host_join(), which, for
already-joined groups only refreshes the MC group expiration timer, which
is desirable; and a userspace notification, also desirable.
Change a selftest that exercises this code path from expecting a rejection
to expecting a pass. The rest of MDB selftests pass without modification.
Signed-off-by: Petr Machata <petrm@nvidia.com>
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Acked-by: Nikolay Aleksandrov <razor@blackwall.org>
Link: https://patch.msgid.link/e5c5188b9787ae806609e7ca3aa2a0a501b9b5c4.1738685648.git.petrm@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit cbe08724c1 ]
Add READ_ONCE() around reads of skb->dev->reg_state, because
this field can be changed from other threads/cpus.
Instead of calling dev_kfree_skb_irq() and kfree_skb()
while interrupts are masked and locks held,
use a temporary list and use __skb_queue_purge_reason()
Use SKB_DROP_REASON_DEV_READY drop reason to better
describe why these skbs are dropped.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Jason Xing <kerneljasonxing@gmail.com>
Link: https://patch.msgid.link/20250204144825.316785-1-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit f6205f8215 ]
The 'used' and 'updated' fields in the FDB entry structure can be
accessed concurrently by multiple threads, leading to reports such as
[1]. Can be reproduced using [2].
Suppress these reports by annotating these accesses using
READ_ONCE() / WRITE_ONCE().
[1]
BUG: KCSAN: data-race in vxlan_xmit / vxlan_xmit
write to 0xffff942604d263a8 of 8 bytes by task 286 on cpu 0:
vxlan_xmit+0xb29/0x2380
dev_hard_start_xmit+0x84/0x2f0
__dev_queue_xmit+0x45a/0x1650
packet_xmit+0x100/0x150
packet_sendmsg+0x2114/0x2ac0
__sys_sendto+0x318/0x330
__x64_sys_sendto+0x76/0x90
x64_sys_call+0x14e8/0x1c00
do_syscall_64+0x9e/0x1a0
entry_SYSCALL_64_after_hwframe+0x77/0x7f
read to 0xffff942604d263a8 of 8 bytes by task 287 on cpu 2:
vxlan_xmit+0xadf/0x2380
dev_hard_start_xmit+0x84/0x2f0
__dev_queue_xmit+0x45a/0x1650
packet_xmit+0x100/0x150
packet_sendmsg+0x2114/0x2ac0
__sys_sendto+0x318/0x330
__x64_sys_sendto+0x76/0x90
x64_sys_call+0x14e8/0x1c00
do_syscall_64+0x9e/0x1a0
entry_SYSCALL_64_after_hwframe+0x77/0x7f
value changed: 0x00000000fffbac6e -> 0x00000000fffbac6f
Reported by Kernel Concurrency Sanitizer on:
CPU: 2 UID: 0 PID: 287 Comm: mausezahn Not tainted 6.13.0-rc7-01544-gb4b270f11a02 #5
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.16.3-3.fc41 04/01/2014
[2]
#!/bin/bash
set +H
echo whitelist > /sys/kernel/debug/kcsan
echo !vxlan_xmit > /sys/kernel/debug/kcsan
ip link add name vx0 up type vxlan id 10010 dstport 4789 local 192.0.2.1
bridge fdb add 00:11:22:33:44:55 dev vx0 self static dst 198.51.100.1
taskset -c 0 mausezahn vx0 -a own -b 00:11:22:33:44:55 -c 0 -q &
taskset -c 2 mausezahn vx0 -a own -b 00:11:22:33:44:55 -c 0 -q &
Reviewed-by: Petr Machata <petrm@nvidia.com>
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Nikolay Aleksandrov <razor@blackwall.org>
Link: https://patch.msgid.link/20250204145549.1216254-2-idosch@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit db1cafc77a ]
set_boost is a per-policy function call, hence a driver wide lock is
unnecessary. Also this mutex_acquire can collide with the mutex_acquire
from the mode-switch path in status_store(), which can lead to a
deadlock. So, remove it.
Signed-off-by: Dhananjay Ugwekar <dhananjay.ugwekar@amd.com>
Acked-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 689805dcc4 ]
When attempting to enable MQPRIO while HTB offload is already
configured, the driver currently returns `-EINVAL` and triggers a
`WARN_ON`, leading to an unnecessary call trace.
Update the code to handle this case more gracefully by returning
`-EOPNOTSUPP` instead, while also providing a helpful user message.
Signed-off-by: Carolina Jubran <cjubran@nvidia.com>
Reviewed-by: Yael Chemla <ychemla@nvidia.com>
Reviewed-by: Cosmin Ratiu <cratiu@nvidia.com>
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Reviewed-by: Kalesh AP <kalesh-anakkur.purayil@broadcom.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 7e8b24e24a ]
A definition with a "header" property is an "external" definition
for C code, as in it is defined already in another C header file.
Other languages will need the exact value but C codegen should
not recreate it. So don't output those definitions in the uAPI
header.
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Link: https://patch.msgid.link/20250203215510.1288728-1-kuba@kernel.org
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 09717c28b7 ]
I realized when we were adding unicast addresses we were enabling
promiscuous mode. I did a bit of digging and realized we had overlooked
setting the driver private flag to indicate we supported unicast filtering.
Example below shows the table with 00deadbeef01 as the main NIC address,
and 5 additional addresses in the 00deadbeefX0 format.
# cat $dbgfs/mac_addr
Idx S TCAM Bitmap Addr/Mask
----------------------------------
00 0 00000000,00000000 000000000000
000000000000
01 0 00000000,00000000 000000000000
000000000000
02 0 00000000,00000000 000000000000
000000000000
...
24 0 00000000,00000000 000000000000
000000000000
25 1 00100000,00000000 00deadbeef50
000000000000
26 1 00100000,00000000 00deadbeef40
000000000000
27 1 00100000,00000000 00deadbeef30
000000000000
28 1 00100000,00000000 00deadbeef20
000000000000
29 1 00100000,00000000 00deadbeef10
000000000000
30 1 00100000,00000000 00deadbeef01
000000000000
31 0 00000000,00000000 000000000000
000000000000
Before rule 31 would be active. With this change it correctly sticks
to just the unicast filters.
Signed-off-by: Alexander Duyck <alexanderduyck@meta.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20250204010038.1404268-2-kuba@kernel.org
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 2f1361f862 ]
There is no CSID TPG on some SoCs, so the v4l2 ctrl in CSID driver
shouldn't be registered. Checking the supported TPG modes to indicate
if the TPG hardware exists or not and only registering v4l2 ctrl for
CSID only when the TPG hardware is present.
Signed-off-by: Depeng Shao <quic_depengs@quicinc.com>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 21925ede44 ]
In /sys/fs/f2fs/features, there's no f2fs_sb_info, so let's avoid to get
the pointer.
Reviewed-by: Chao Yu <chao@kernel.org>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 8df0f00282 ]
The expression PCC_NUM_RETRIES * pcc_chan->latency is currently being
evaluated using 32-bit arithmetic.
Since a value of type 'u64' is used to store the eventual result,
and this result is later sent to the function usecs_to_jiffies with
input parameter unsigned int, the current data type is too wide to
store the value of ctx->usecs_lat.
Change the data type of "usecs_lat" to a more suitable (narrower) type.
Found by Linux Verification Center (linuxtesting.org) with SVACE.
Signed-off-by: Andrey Vatoropin <a.vatoropin@crpt.ru>
Link: https://lore.kernel.org/r/20250204095400.95013-1-a.vatoropin@crpt.ru
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 1c7c7388e6 ]
The clustered uncore frequency counters, UMHz*.*
should honor the --show and --hide options.
All non-specified counters should be implicityly hidden.
But when --show was used, UMHz*.* showed up anyway:
$ sudo turbostat -q -S --show Busy%
Busy% UMHz0.0 UMHz1.0 UMHz2.0 UMHz3.0 UMHz4.0
Indeed, there was no string that can be used to explicitly
show or hide clustered uncore counters.
Even through they are dynamically probed and added,
group the clustered UMHz*.* counters with the legacy
built-in-counter "UncMHz" for show/hide.
turbostat --show Busy%
does not show UMHz*.*.
turbostat --show UncMHz
shows either UncMHz or UMHz*.*, if present
turbostat --hide UncMHz
hides either UncMHz or UMHz*.*, if present
Reported-by: Artem Bityutskiy <artem.bityutskiy@intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>
Tested-by: Artem Bityutskiy <artem.bityutskiy@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit d078f5857a ]
Driver selects firmware by hardware version, which normally can be read
from registers before selecting firmware. However, certain chips such as
RTL8851B, it needs to read hardware version from efuse while doing
power_on, but do power_on after selecting firmware in current flow.
To resolve this flow problem, move power_on out from
rtw89_mac_partial_init(), and call rtw89_mac_pwr_on() separately at
proper places to have expected flow.
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Link: https://patch.msgid.link/20250203072911.47313-2-pkshih@realtek.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
