commit be8fcd4a82 upstream.
sas_host_setup() unconditionally sets shost->opt_sectors from
dma_opt_mapping_size().
When the IOMMU is disabled or in passthrough mode and no DMA ops provide
an opt_mapping_size callback, dma_opt_mapping_size() returns
min(dma_max_mapping_size(), SIZE_MAX) which equals
dma_max_mapping_size() — a hard upper bound, not an optimization hint.
On a Dell PowerEdge R750 with mpt3sas (Broadcom SAS3816, FW 33.15.00.00)
and intel_iommu=off the following values are observed:
dma_opt_mapping_size() = dma_max_mapping_size() (no real hint)
shost->max_sectors = 32767
opt_sectors = min(32767, huge >> 9) = 32767
optimal_io_size = 32767 << 9 = 16776704
→ round_down(16776704, 4096) = 16773120
The SAS disk (SAMSUNG MZILT800HBHQ0D3) does not report an Optimal
Transfer Length in VPD page B0, so sdkp->opt_xfer_blocks remains 0.
sd_revalidate_disk() then uses min_not_zero(0, opt_sectors) =
opt_sectors, propagating the bogus value into the block device's
optimal_io_size (visible as OPT-IO = 16773120 in lsblk --topology).
mkfs.xfs picks up optimal_io_size and minimum_io_size and computes:
swidth = 16773120 / 4096 = 4095
sunit = 8192 / 4096 = 2
Since 4095 % 2 != 0, XFS rejects the geometry:
SB stripe unit sanity check failed
This makes it impossible to create XFS filesystems (e.g. for
/var/lib/docker) during system bootstrap.
Fix this by introducing a sas_dma_setup_opt_sectors() helper that sets
opt_sectors only when dma_opt_mapping_size() is strictly less than
dma_max_mapping_size(), indicating a genuine DMA optimization
constraint.
The helper computes min(opt_sectors, max_sectors) first, then rounds
down to a power of two so that filesystem geometry calculations always
produce clean results.
When the two DMA values are equal, no backend provided a real hint, so
opt_sectors stays at 0 ("no preference").
[mkp: implemented hch's suggestion]
Fixes: 4cbfca5f77 ("scsi: scsi_transport_sas: cap shost opt_sectors according to DMA optimal limit")
Cc: stable@vger.kernel.org
Reviewed-by: John Garry <john.g.garry@oracle.com>
Signed-off-by: Ionut Nechita <ionut.nechita@windriver.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Link: https://patch.msgid.link/20260519135238.373784-2-ionut.nechita@windriver.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 574aa0b479 upstream.
v9fs_dec_count() unconditionally calls drop_nlink() on regular files,
even when the inode's nlink is already zero. In cacheless mode the
client refetches inode metadata from the server (the source of truth)
on every operation, so by the time v9fs_remove() returns, the locally
cached nlink may already reflect the post-unlink value:
1. Client initiates unlink, server processes it and sets nlink to 0
2. Client refetches inode metadata (nlink=0) before unlink returns
3. Client's v9fs_remove() completes successfully
4. Client calls v9fs_dec_count() which calls drop_nlink() on nlink=0
This race is easily triggered under heavy unlink workloads, such as
stress-ng's unlink stressor, producing the following warning:
WARNING: fs/inode.c:417 at drop_nlink+0x4c/0xc8
Call trace:
drop_nlink+0x4c/0xc8
v9fs_remove+0x1e0/0x250 [9p]
v9fs_vfs_unlink+0x20/0x38 [9p]
vfs_unlink+0x13c/0x258
...
In cacheless mode the server is authoritative and the inode is on its
way out, so locally adjusting nlink buys nothing. Skip v9fs_dec_count()
entirely when neither CACHE_META nor CACHE_LOOSE is set, which both
avoids the warning and removes a class of nlink races (two concurrent
unlinkers observing nlink > 0 and both calling drop_nlink()) that an
nlink == 0 guard alone would only narrow rather than close.
Fixes: ac89b2ef9b ("9p: don't maintain dir i_nlink if the exported fs doesn't either")
Cc: stable@vger.kernel.org
Suggested-by: Dominique Martinet <asmadeus@codewreck.org>
Signed-off-by: Breno Leitao <leitao@debian.org>
Message-ID: <20260421-9p-v2-1-48762d294fad@debian.org>
Signed-off-by: Dominique Martinet <asmadeus@codewreck.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 36f1648644 upstream.
register_device() links a new slram_mtdlist entry before allocating all
of the state needed by the entry. If a later allocation, memremap(), or
mtd_device_register() fails, the partially initialized entry remains on
the global list. A later cleanup can then dereference or free invalid
state from that failed entry.
Unwind the partially initialized entry and clear the list tail on each
failure path after the entry has been linked.
Fixes: 1da177e4c3 ("Linux-2.6.12-rc2")
Cc: stable@vger.kernel.org
Signed-off-by: Ruoyu Wang <ruoyuw560@gmail.com>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 16b02eb4b9 upstream.
proc_register() increments the parent directory's link count for every
entry it registers, while remove_proc_entry() and remove_proc_subtree()
decrement it only when the removed entry is a directory. Regular files
thus inflate the parent's count while they exist, and leak one link
permanently on every create and remove cycle.
For example, /proc/bus/pci/00 with twenty-two device files and no
subdirectories reports nlink 24 instead of 2, and SR-IOV VF enable
and disable cycles, each creating and removing the VF config space
entries under /proc/bus/pci/<bus>, inflate the link count of that
directory without bound.
Before commit e06689bf57 ("proc: change ->nlink under
proc_subdir_lock"), the increment lived in proc_mkdir_data() and
proc_create_mount_point(), and was therefore applied only to
directories. Moving it into proc_register() to bring it under
proc_subdir_lock dropped the S_ISDIR check.
Thus, move the nlink accounting into pde_subdir_insert() and
pde_erase(), only updating it for directories in both, so the link
count is always changed together with the directory entry itself.
Fixes: e06689bf57 ("proc: change ->nlink under proc_subdir_lock")
Cc: stable@vger.kernel.org # v5.5+
Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org>
Link: https://patch.msgid.link/20260613211005.921692-1-kwilczynski@kernel.org
Signed-off-by: Christian Brauner (Amutable) <brauner@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 05ea83ee88 upstream.
damon_sysfs_scheme_add_dirs() setup the tried_regions directory after the
stats directory setup is completed. When the tried_regions directory
setup is failed, the setup function ensures the reference for the tried
regions directory is released. Hence the error path should put references
on setup succeeded directory objects, starting from the stats directory.
However, the error path is putting the tried_regions directory instead of
the stats directory.
As a direct result, the stats directory object is leaked. Worse yet, if
the tried_regions directory setup failed from the initial allocation, the
scheme->tried_regions field remains uninitialized. The following
kobject_put(&scheme->tried_regions->kobj) call in the error path will
dereference the uninitialized memory. The setup failures should not be
common. But once it happens, the consequence is quite bad.
Fix this issue by correctly putting the stats directory instead of the
tried_regions directory.
The issue was discovered [1] by Sashiko.
Link: https://lore.kernel.org/20260618005650.83868-3-sj@kernel.org
Link: https://lore.kernel.org/20260617005223.96813-1-sj@kernel.org [1]
Fixes: 5181b75f43 ("mm/damon/sysfs-schemes: implement schemes/tried_regions directory")
Signed-off-by: SeongJae Park <sj@kernel.org>
Cc: <stable@vger.kernel.org> # 6.2.x
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit d58fdbe37a upstream.
Patch series "mm/damon/sysfs-schemes: fix wrong directories put orders in
error paths".
Error paths of damon_sysfs_access_pattern_add_dirs() and
damon_sysfs_scheme_add_dirs() functions put references to directories in
wrong orders. As a result, uninitialized memory dereference and/or
memory leak can happen. Fix those.
This patch (of 2):
In access_pattern_add_dirs(), error handling path puts references starting
from setup failed directories. If the failure happpened from the initial
allication in the setup functions, uninitialized memory dereference
happen. The allocation failures will not commonly happen, but the
consequence is quite bad. Fix the wrong reference put orders.
The issue was discovered [1] by Sashiko.
Link: https://lore.kernel.org/20260618005650.83868-2-sj@kernel.org
Link: https://lore.kernel.org/20260617060005.86852-1-sj@kernel.org [1]
Fixes: 7e84b1f821 ("mm/damon/sysfs: support DAMON-based Operation Schemes")
Signed-off-by: SeongJae Park <sj@kernel.org>
Cc: <stable@vger.kernel.org> # 5.18.x
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit bf4a195f06 upstream.
Currently, the while loop drops the reference to prev in each iteration.
If the loop terminates early due to a break, the final of_node_put(np)
correctly drops the reference to the current node.
However, if the loop terminates naturally because np == NULL, calling
of_node_put(np) is a no-op. This leaves the last valid node stored in
prev without its reference dropped, resulting in a node reference leak.
Fix this by changing the final `of_node_put(np)` to `of_node_put(prev)`.
Fixes: 94f9bf118f ("RISC-V: Fix of_node_* refcount")
Cc: stable@vger.kernel.org
Assisted-by: Gemini:gemini-3.1-pro
Signed-off-by: Zishun Yi <vulab@iscas.ac.cn>
Link: https://patch.msgid.link/20260509074040.1747800-1-vulab@iscas.ac.cn
Signed-off-by: Paul Walmsley <pjw@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 98e37db4a3 upstream.
This patch addresses a critical memory management flaw. When
CONFIG_CPUMASK_OFFSTACK is enabled, cpumask_var_t is a pointer.
Consequently, sizeof(new_mask) evaluates to the pointer size, causing
copy_from_user() to clobber the mask pointer. Furthermore, the old
logic performed copy_from_user() before allocating the mask.
Fix this by allocating new_mask first. To handle variable-sized user
masks correctly, use cpumask_size() to truncate overly large user masks
or pad undersized masks with zeros before copying the data directly into
the allocated buffer.
Fixes: 295cbf6d63 ("[MIPS] Move FPU affinity code into separate file.")
Cc: stable@vger.kernel.org
Signed-off-by: Aaron Tomlin <atomlin@atomlin.com>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 4373cfa38e upstream.
In is_full_charged(), power_supply_get_by_name() is called to
obtain a reference to the fuel_gauge power supply. If the
voltage check (uV >= desc->fullbatt_uV) succeeds, the function
returns true directly without releasing the reference, leaking
the refcount.
Fix this by setting a flag and jumping to the out label where
power_supply_put() properly drops the reference.
Cc: stable@vger.kernel.org
Fixes: e132fc6bb8 ("power: supply: charger-manager: Make decisions focussed on battery status")
Signed-off-by: WenTao Liang <vulab@iscas.ac.cn>
Link: https://patch.msgid.link/20260611005322.53096-1-vulab@iscas.ac.cn
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit f1df9d771d upstream.
indx_insert_into_buffer() computes
used = used1 - to_copy - sp_size;
memmove(de_t, Add2Ptr(sp, sp_size), used - le32_to_cpu(hdr1->de_off));
where sp and sp_size come from hdr_find_split(). hdr_find_split()
walks entries by le16_to_cpu(e->size) without validating that each
step stays within hdr->used or that the size field is at least
sizeof(struct NTFS_DE). index_hdr_check(), the on-load gatekeeper,
only validates header-level fields (used, total, de_off) and does
not walk per-entry sizes.
A crafted NTFS image whose leaf INDEX_HDR reports used == total but
contains one interior NTFS_DE with size = 0xFFF0 therefore passes
validation, descends to indx_insert_into_buffer() through the
ntfs_create() -> indx_insert_entry() path, and makes hdr_find_split()
return an sp whose sp_size (0xFFF0) greatly exceeds the remaining
bytes in the buffer. The u32 subtraction underflows and the memmove
count becomes a near-4-GiB value, producing an out-of-bounds kernel
write that corrupts adjacent allocations and panics the kernel.
Reproduced on 7.0.0-rc7 with UML + KASAN via a crafted image and a
single 'touch' inside the mounted directory; crash site resolves to
fs/ntfs3/index.c at the memmove. Trigger requires only local mount
of an attacker-supplied filesystem image (USB, loopback, or removable
media auto-mount).
Reject the split whenever the chosen sp plus its declared size
already extends past hdr1->used. This is the minimal fix; it
preserves the existing hdr_find_split() contract and relies on the
same out: cleanup path as the pre-existing error returns.
A prior OOB read in the very same indx_insert_into_buffer() memmove
was fixed in commit b8c4494904 ("fs/ntfs3: Fix OOB read in
indx_insert_into_buffer") by tightening hdr_find_e(), but that fix
does not cover the split-point size field path addressed here: sp is
returned by hdr_find_split(), not hdr_find_e(), and the underflow is
driven by sp->size rather than hdr->used exceeding hdr->total.
Fixes: 82cae269cf ("fs/ntfs3: Add initialization of super block")
Cc: stable@vger.kernel.org
Reported-by: Michael Bommarito <michael.bommarito@gmail.com>
Assisted-by: Claude:claude-opus-4-7
Signed-off-by: Michael Bommarito <michael.bommarito@gmail.com>
Signed-off-by: Konstantin Komarov <almaz.alexandrovich@paragon-software.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 9b6926ac9c upstream.
indx_insert_into_root() promotes a full resident $INDEX_ROOT into
$INDEX_ALLOCATION and copies all non-last resident root entries into
a newly allocated INDEX_BUFFER via hdr_insert_head(). The source
byte count 'to_move' is summed from the on-disk resident entry sizes
and is independent of the destination buffer size, which comes from
root->index_block_size (via indx->index_bits).
A crafted NTFS image that keeps a valid, full resident root but
shrinks root->index_block_size down to 512 after the root has been
populated makes hdr_insert_head() memcpy attacker-controlled resident
entry bytes past the end of the kmalloc(1u << indx->index_bits)
allocation returned by indx_new(). For a 512-byte destination and a
resident root whose non-last entries total 560 bytes, the memcpy
overruns by 120 bytes and a following memmove extends the highest
written offset to 136 bytes past the allocation. The overflow bytes
are a direct copy of on-disk entries (via kmemdup), so they are
fully attacker-controlled.
The write is reachable from unprivileged open(O_CREAT) on a mounted
crafted NTFS image: a single sufficiently long create in a directory
whose resident root is already full forces root promotion and
triggers the copy.
This is a controlled out-of-bounds write of 120-136 bytes past a
kmalloc(index_block_size) allocation, with attacker-controlled
content. It is a bounded adjacent-heap corruption primitive; it is
not an arbitrary-address write. Successful exploitation into a named
victim object depends on the surrounding slab layout.
Reject the copy at the sink. The destination's INDEX_HDR already
reports hdr_total (the payload capacity of the new buffer) and
hdr_used (the bytes already consumed by the terminal END entry
installed by indx_new()); require that to_move fits in the remaining
payload before calling hdr_insert_head(). On mismatch, fail with
-EINVAL and mark the filesystem as having a detected on-disk
inconsistency, which is the same behaviour as the surrounding
validation in this function.
Fixes: 82cae269cf ("fs/ntfs3: Add initialization of super block")
Cc: stable@vger.kernel.org
Assisted-by: Claude:claude-opus-4-7
Signed-off-by: Michael Bommarito <michael.bommarito@gmail.com>
Signed-off-by: Konstantin Komarov <almaz.alexandrovich@paragon-software.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 9611f64430 upstream.
A crafted NTFS3 disk image triggers an in-kernel infinite loop at
mount time, hanging the mounting thread and firing the soft-lockup
watchdog within ~22s on multi-CPU hosts (panic with
kernel.softlockup_panic=1). The bug is reachable from desktop USB
auto-mount on distributions where udisks2 routes the NTFS signature
to the in-tree ntfs3 driver (Arch family and an increasing fraction
of Fedora / openSUSE / RHEL deployments); CAP_SYS_ADMIN-class manual
mount elsewhere.
check_rstbl()'s second walker iterates the free-entry singly-linked
list headed by rt->first_free with no upper bound on iteration count:
for (off = ff; off;) {
if (off == RESTART_ENTRY_ALLOCATED)
return false;
off = le32_to_cpu(*(__le32 *)Add2Ptr(rt, off));
if (off > ts - sizeof(__le32))
return false;
}
The existing guards cover three exits: end-of-list (off == 0), the
in-use marker (off == RESTART_ENTRY_ALLOCATED), and out-of-bounds
(off > ts - sizeof(__le32)). None of the three prevents an
in-bounds cycle.
A crafted on-disk RESTART_TABLE whose free chain contains a
self-loop or A->B->A cycle whose offsets satisfy:
- in range [sizeof(struct RESTART_TABLE), ts - sizeof(__le32)]
- (off - sizeof(struct RESTART_TABLE)) % rsize == 0
passes all existing guards and spins the mount-time thread forever.
Reproduced in UML by hand-forging a 2 MB NTFS3 image whose journal
RESTART_TABLE first_free = 0x18 and whose entry at offset 0x18
stores 0x18 as its next pointer; mount of the forged image with
the in-tree ntfs3 driver never returns.
Bound the walker by rt->used. Each entry on a legitimate free
chain is unique, and the total slot count is ne = le16_to_cpu
(rt->used). A traversal that visits more than ne slots is by
construction malformed; reject it as a corrupt RESTART_TABLE.
After this patch, mount of the forged image returns with -EINVAL
and a log_replay failure message, and mkntfs-produced legitimate
images mount cleanly (verified in the same UML harness).
Fixes: b46acd6a6a ("fs/ntfs3: Add NTFS journal")
Cc: stable@vger.kernel.org
Signed-off-by: Michael Bommarito <michael.bommarito@gmail.com>
Assisted-by: Claude:claude-opus-4-7
Signed-off-by: Konstantin Komarov <almaz.alexandrovich@paragon-software.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 3e127829e5 upstream.
In do_action()'s UpdateRecordDataRoot (fslog.c:3489) and
UpdateRecordDataAllocation (fslog.c:3697) cases, the memmove
destination is `Add2Ptr(e, le16_to_cpu(e->view.data_off))`,
where e->view.data_off comes from an on-disk NTFS_DE inside
an INDEX_ROOT or INDEX_BUFFER. Neither case validates
view.data_off + dlen against e->size; the existing
check_if_index_root / check_if_alloc_index helpers walk the
entry chain and validate the entry's offset, but not its
internal view fields.
The neighbouring read sites (e.g., fs/ntfs3/index.c when
iterating view entries) check view.data_off + view.data_size
<= e->size. Apply the same bound at the two memmove sites.
Reproduced under UML+KASAN on mainline 8d90b09e6741 via
pr_warn-only probe instrumentation: with view.data_off forced
to 0xFFFC, the memmove writes 32 bytes past the end of the
NTFS_DE.
This is similar in shape to Pavitra Jha's 2026-05-02 patch
"fs/ntfs3: prevent oob in case UpdateRecordDataRoot"
(<20260502105008.21827-1-jhapavitra98@gmail.com>) which
proposes calling ntfs3_bad_de_range(); that helper does not
exist in mainline. This patch uses inline checks.
Fixes: b46acd6a6a ("fs/ntfs3: Add NTFS journal")
Cc: stable@vger.kernel.org
Reported-by: Pavitra Jha <jhapavitra98@gmail.com>
Closes: https://lore.kernel.org/ntfs3/20260502105008.21827-1-jhapavitra98@gmail.com/
Assisted-by: Claude:claude-opus-4-7
Signed-off-by: Michael Bommarito <michael.bommarito@gmail.com>
Signed-off-by: Konstantin Komarov <almaz.alexandrovich@paragon-software.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 1ebd684b8f upstream.
indx_find_buffer() recursively descends the B+ tree index with no depth
limit. A crafted NTFS image with circular index node references causes
unbounded recursion, overflowing the kernel stack and panicking the
system.
This is reachable by mounting a malicious NTFS filesystem (e.g. from a
USB drive via desktop automount) and deleting a file whose index entry
triggers the rebalancing fallback path in indx_delete_entry().
Add a depth parameter and bail out with -EINVAL when it reaches the
fnd->nodes array bound, matching the constraint already enforced by
fnd_push() in indx_find().
The related function indx_find() was previously patched for a similar
infinite-loop issue (commit 1732053c8a), but indx_find_buffer() was
missed.
Fixes: 82cae269cf ("fs/ntfs3: Add initialization of super block")
Cc: stable@vger.kernel.org
Assisted-by: Claude:claude-opus-4-6
Assisted-by: Codex:gpt-5-4
Signed-off-by: Michael Bommarito <michael.bommarito@gmail.com>
Signed-off-by: Konstantin Komarov <almaz.alexandrovich@paragon-software.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 6a4c53a2e2 upstream.
log_replay() converts DIR_PAGE_ENTRY_32 records into DIR_PAGE_ENTRY
records when replaying version 0 restart tables.
During this conversion, the memmove() length is derived directly from
the on-disk lcns_follow field:
memmove(&dp->vcn, &dp0->vcn_low,
2 * sizeof(u64) +
le32_to_cpu(dp->lcns_follow) * sizeof(u64));
check_rstbl() validates restart table structure, but does not constrain
per-entry lcns_follow values relative to the entry size. A malformed
filesystem image can provide an oversized lcns_follow value, causing
the conversion memmove() to access memory beyond the bounds of the
allocated restart table buffer.
The same field is later used to bound iteration over page_lcns[],
so validating lcns_follow during conversion also prevents downstream
out-of-bounds access from the same malformed metadata.
Compute the maximum valid lcns_follow from the already-validated
restart table entry size and reject entries that exceed this bound.
Reuse the existing t16/t32 scratch variables already declared in
log_replay() to avoid introducing new declarations.
Fixes: b46acd6a6a ("fs/ntfs3: Add NTFS journal")
Cc: stable@vger.kernel.org
Signed-off-by: Pavitra Jha <jhapavitra98@gmail.com>
[almaz.alexandrovich@paragon-software.com: fixed the conflicts]
Signed-off-by: Konstantin Komarov <almaz.alexandrovich@paragon-software.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit d1570c48f4 upstream.
In do_action()'s UpdateResidentValue case (fslog.c:3307),
lrh->attr_off and lrh->redo_len come from the on-disk LRH.
When they satisfy aoff + dlen < attr->res.data_off, the
assignment
attr->res.data_size = cpu_to_le32(aoff + dlen - data_off);
underflows to ~4 GiB (e.g. 0xFFFFFFF9 when aoff=0x10, dlen=1,
data_off=0x18). Subsequent code that reads attr->res.data_size
to walk the resident attribute payload would then read up to
4 GiB past the 1024-byte MFT record allocation.
The existing mi_enum_attr() defense in fs/ntfs3/record.c:287
catches the corrupted data_size on the next attribute walk
and fails the mount, but only on the path that walks all
attributes. A read site that picks an attribute by name and
reads its data_size without re-validating is not covered.
Validate aoff against data_off and asize at the source.
Reproduced under UML+KASAN on mainline 8d90b09e6741 via
pr_warn-only probe: with aoff=0x10 and data_off=0x18, the
post-assignment data_size is 0xfffffff9 (mount then fails
at -22 from mi_enum_attr).
Fixes: b46acd6a6a ("fs/ntfs3: Add NTFS journal")
Cc: stable@vger.kernel.org
Assisted-by: Claude:claude-opus-4-7
Signed-off-by: Michael Bommarito <michael.bommarito@gmail.com>
[almaz.alexandrovich@paragon-software.com: clang-formatted the changes]
Signed-off-by: Konstantin Komarov <almaz.alexandrovich@paragon-software.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 5e7b598660 upstream.
In log_replay()'s analysis pass, after find_dp() returns a
valid DIR_PAGE_ENTRY for the (target_attr, target_vcn) tuple,
the copy_lcns block walks lrh->lcns_follow further entries:
t16 = le16_to_cpu(lrh->lcns_follow);
for (i = 0; i < t16; i++) {
size_t j = (size_t)(le64_to_cpu(lrh->target_vcn) -
le64_to_cpu(dp->vcn));
dp->page_lcns[j + i] = lrh->page_lcns[i];
}
find_dp() only validates that target_vcn falls within
[dp->vcn, dp->vcn + dp->lcns_follow), i.e., that the FIRST
cluster is covered. The walk through the further entries is
not bounded against dp->lcns_follow. For a malformed LRH
where target_vcn = dp->vcn + dp->lcns_follow - 1 and
lrh->lcns_follow > 1, the i > 0 writes overflow the dp's
allocated page_lcns[] array.
Add the missing j + lrh->lcns_follow <= dp->lcns_follow guard.
Reproduced under UML+KASAN on mainline 8d90b09e6741 as a
slab-out-of-bounds write of size 8 from log_replay+0x68d4 on
the mount path.
This is distinct from Pavitra Jha's 2026-05-02 patch
("fs/ntfs3: validate lcns_follow in log_replay conversion",
<20260502154252.164586-1-jhapavitra98@gmail.com>) which
addresses the separate version-0 dirty-page-table conversion
path's memmove(&dp->vcn, ...) call. The two fixes are
complementary; both should land.
Fixes: b46acd6a6a ("fs/ntfs3: Add NTFS journal")
Cc: stable@vger.kernel.org
Assisted-by: Claude:claude-opus-4-7
Signed-off-by: Michael Bommarito <michael.bommarito@gmail.com>
[almaz.alexandrovich@paragon-software.com: clang-formatted the changes,
fixed conflicts]
Signed-off-by: Konstantin Komarov <almaz.alexandrovich@paragon-software.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit fc4626bb36 upstream.
In do_action()'s DeleteIndexEntryAllocation case, e->size comes
from an on-disk INDEX_BUFFER entry. When e->size makes
e + e->size point past hdr + hdr->used,
PtrOffset(e1, Add2Ptr(hdr, used)) returns a negative ptrdiff_t
that is silently cast to a quasi-infinite size_t when passed
to memmove(). The memmove then walks past the destination
buffer.
The sibling DeleteIndexEntryRoot case at fslog.c:3540-3543
already carries the corresponding guard:
if (PtrOffset(e1, Add2Ptr(hdr, used)) < esize ||
Add2Ptr(e, esize) > Add2Ptr(lrh, rec_len) ||
used + esize > le32_to_cpu(hdr->total)) {
goto dirty_vol;
}
Apply the same shape to the allocation-path case. Also reject
esize == 0: memmove(e, e, ...) is a no-op and leaves
hdr->used unchanged, hiding a malformed entry from the
existing check_index_header() walk.
Reproduced under UML+KASAN on mainline 8d90b09e6741 by
mounting a crafted NTFS image: the unguarded memmove takes a
length of 0xffffffffffffff00 and the kernel oopses in
memmove+0x81/0x1a0 on the do_action+0x36a2 frame.
Fixes: b46acd6a6a ("fs/ntfs3: Add NTFS journal")
Cc: stable@vger.kernel.org
Assisted-by: Claude:claude-opus-4-7
Signed-off-by: Michael Bommarito <michael.bommarito@gmail.com>
[almaz.alexandrovich@paragon-software.com: clang-formatted the changes]
Signed-off-by: Konstantin Komarov <almaz.alexandrovich@paragon-software.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 932fa0c149 upstream.
In ntfs3_rename(), when IS_DIRSYNC(new_dir) is true, the code syncs
the renamed file inode instead of the target directory new_dir:
if (IS_DIRSYNC(new_dir))
ntfs_sync_inode(inode); /* should be new_dir */
DIRSYNC requires that directory metadata changes are written to disk
synchronously. Since new_dir was modified (a new directory entry was
added), it is new_dir that must be synced to satisfy the guarantee,
not the renamed file itself.
This bug has existed since the initial ntfs3 implementation and was
carried through the refactoring in commit 78ab59fee0
("fs/ntfs3: Rework file operations").
Fix by syncing new_dir instead of inode.
Fixes: 4342306f0f ("fs/ntfs3: Add file operations and implementation")
Cc: stable@vger.kernel.org
Signed-off-by: Zhan Xusheng <zhanxusheng@xiaomi.com>
Signed-off-by: Konstantin Komarov <almaz.alexandrovich@paragon-software.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit a2c14ff63e upstream.
In cpcap_battery_detect_battery_type(), the reference to an nvmem
device obtained via nvmem_device_find() is not released with
nvmem_device_put() on the success or read-failure paths, causing a
permanent reference leak. The driver’s retry logic on subsequent
battery property reads can compound this leak, preventing the nvmem
device from ever being freed.
Found by code review.
Signed-off-by: Ma Ke <make24@iscas.ac.cn>
Cc: stable@vger.kernel.org
Fixes: fd46821e85 ("power: supply: cpcap-battery: Add battery type auto detection for mapphone devices")
Link: https://patch.msgid.link/20260424011013.879639-1-make24@iscas.ac.cn
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 5ff79e8bdc upstream.
In 64-bit configurations calling any firmware entry points from a kernel
thread other than the initial one will result in a situation where the
stack has been placed in the XKPHYS 64-bit memory segment.
Consequently the stack pointer is no longer a 32-bit value and when the
32-bit firmware code called uses 32-bit ALU operations to manipulate the
stack pointer, the calculated result is incorrect (in fact in the 64-bit
MIPS ISA almost all 32-bit ALU operations will produce an unpredictable
result when executed on 64-bit data) and control goes astray.
This may happen when no final console driver has been enabled in the
configuration and consequently the initial console continues being used
late into bootstrap, or with an upcoming change that will switch the zs
driver to use a platform device, which in turn will make the console
handover happen only after other kernel threads have already been
started, and the kernel will hang at:
pid_max: default: 32768 minimum: 301
or somewhat later, but always before:
cblist_init_generic: Setting adjustable number of callback queues.
has been printed.
It seems that only the prom_printf() entry point is affected. Of all
the other entry points wired only rex_slot_address() and rex_gettcinfo()
are called from a kernel thread other than the initial one, specifically
kernel_init(), and they are leaf functions that do no business with the
stack, having worked with no issue ever since 64-bit support was added
for the platform back in 2002.
To address this issue then, arrange for the stack to be switched in the
o32 wrapper as required for prom_printf() only, by supplying call_o32()
with a pointer to a chunk of initdata space, which is placed in the
CKSEG0 32-bit compatibility segment, observing that prom_printf() is
only called from console output handler and therefore with the console
lock held, implying no need for this code to be reentrant.
Other firmware entry points may be called with interrupts enabled and no
lock held, and may therefore require that call_o32() be reentrant. They
trigger no issue at this point and "if it ain't broke, don't fix it," so
just leave them alone.
Fixes: 1da177e4c3 ("Linux-2.6.12-rc2")
Signed-off-by: Maciej W. Rozycki <macro@orcam.me.uk>
Cc: stable@vger.kernel.org # v2.6.12+
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 42f5b80dda upstream.
xdr_buf_to_bvec() writes a bio_vec into the caller's array before
testing whether that slot is in range, and the head branch performs
the store with no check at all. When the caller's budget is exactly
used up, the next store lands one element past the end of the array.
The overflow label returns count - 1, which masks the surplus store
but cannot undo it.
rq_bvec, the array passed by nfsd_vfs_write(), is allocated to
exactly rq_maxpages entries with no slack. The OOB store can land in
adjacent slab memory; the bv_len and bv_offset fields written there
are derived from client-supplied RPC payload sizes.
Move the in-range check ahead of the store in the head, page-loop,
and tail branches. With the check at the top of each sequence, count
is incremented only after a successful store, so the overflow label
can return count directly.
Reported-by: Chris Mason <clm@meta.com>
Fixes: 2eb2b93581 ("SUNRPC: Convert svc_tcp_sendmsg to use bio_vecs directly")
Cc: stable@vger.kernel.org
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 70a38f87be upstream.
The cached-file path in nlm_lookup_file() reaches the found: label
unconditionally, even when nlm_do_fopen() fails. At that label
*result and file->f_count are updated before the error is returned.
The wrappers nlm3svc_lookup_file() and nlm4svc_lookup_file() then
bail out of their switch without copying *result back to their
caller, so the proc handler's local nlm_file pointer remains NULL
and the cleanup path skips nlm_release_file(). The f_count
increment is never released, and nlm_traverse_files() can no
longer reap the file because its refcount never returns to zero
between requests.
Short-circuit the cached path so neither *result nor f_count is
touched when nlm_do_fopen() fails on a hashed nlm_file.
Fixes: 7f024fcd5c ("Keep read and write fds with each nlm_file")
Cc: stable@vger.kernel.org
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit f16a151345 upstream.
A client can repeatedly drive nlm_do_fopen() failures by presenting
file handles that the underlying export rejects. After kzalloc_obj()
succeeds in nlm_lookup_file(), the freshly allocated nlm_file is not
yet inserted into nlm_files[]. The nlm_do_fopen() failure path jumps
to out_unlock, which releases nlm_file_mutex and returns without
freeing the allocation, so each failure leaks one nlm_file.
Route the failure through out_free so kfree() runs before the
function returns.
Fixes: 7f024fcd5c ("Keep read and write fds with each nlm_file")
Cc: stable@vger.kernel.org
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit d00e32f84c upstream.
When wait_for_completion_interruptible_timeout() in
svc_tcp_handshake() returns 0 (timeout) or -ERESTARTSYS (signal) and
tls_handshake_cancel() then returns false, handshake_complete() has
won the cancellation race: it has set HANDSHAKE_F_REQ_COMPLETED and
is about to invoke svc_tcp_handshake_done(), but the callback's
side effects on xpt_flags and on svsk->sk_handshake_done have not
yet committed.
The current code reads xpt_flags immediately to decide whether the
session succeeded. Two races result.
If the callback has executed set_bit(XPT_TLS_SESSION) but not yet
clear_bit(XPT_HANDSHAKE), svc_tcp_handshake() sees a session,
enqueues the transport, and returns. svc_xprt_received() then
clears XPT_BUSY, a worker thread picks the transport up, the
dispatcher in svc_handle_xprt() observes XPT_HANDSHAKE still set,
and xpo_handshake is invoked a second time. That svc_tcp_handshake()
calls init_completion(&svsk->sk_handshake_done) while the original
callback concurrently calls complete_all() on it, corrupting the
embedded swait_queue.
If the callback has set HANDSHAKE_F_REQ_COMPLETED but not yet
entered svc_tcp_handshake_done(), svc_tcp_handshake() reads
XPT_TLS_SESSION as clear and tears the connection down even though
the handshake is about to succeed.
Wait for the callback to commit before inspecting xpt_flags. The
completion is guaranteed to fire because handshake_complete()
invokes svc_tcp_handshake_done() unconditionally once it has set
HANDSHAKE_F_REQ_COMPLETED.
Fixes: b3cbf98e2f ("SUNRPC: Support TLS handshake in the server-side TCP socket code")
Cc: stable@vger.kernel.org
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 4f988f3a28 upstream.
svc_tcp_handshake() stores the raw svc_xprt pointer in
tls_handshake_args.ta_data and submits the request through
tls_server_hello_x509(). The handshake core takes only
sock_hold(req->hr_sk); nothing references the embedding struct
svc_sock that svc_tcp_handshake_done() reaches via container_of().
Two close races leave the in-flight callback writing through a freed
svc_sock. svc_sock_free() calls tls_handshake_cancel() and discards
its return value: a false return means handshake_complete() has
already set HANDSHAKE_F_REQ_COMPLETED but hp_done() may not have
finished, yet svc_sock_free() proceeds to kfree(svsk). The
cancel-loser fall-through inside svc_tcp_handshake() itself produces
the same window: when wait_for_completion_interruptible_timeout()
returns <= 0 (timeout or signal) and tls_handshake_cancel() returns
false, the function does not drain, returns, and svc_handle_xprt()
calls svc_xprt_received(), which clears XPT_BUSY and can drop the
last reference. A concurrent close then runs svc_sock_free() while
svc_tcp_handshake_done() is still updating xpt_flags and walking
svsk->sk_handshake_done.
The corruption surfaces as set_bit/clear_bit RMW into the freed
xpt_flags slab slot and as complete_all() walking and writing the
freed wait_queue_head_t list embedded in sk_handshake_done -- a
slab-corruption primitive, not a benign read. The path is reachable
on any TLS-enabled NFS server whenever a connection close overlaps
the tlshd downcall delivery window; the interruptible wait means
signal delivery suffices, not just SVC_HANDSHAKE_TO expiry.
Take svc_xprt_get(xprt) immediately before tls_server_hello_x509()
so the in-flight callback owns its own reference. Release it on the
two edges where the callback is guaranteed not to fire -- submission
failure from tls_server_hello_x509() and a successful
tls_handshake_cancel() -- and at the tail of
svc_tcp_handshake_done() after complete_all().
Fixes: b3cbf98e2f ("SUNRPC: Support TLS handshake in the server-side TCP socket code")
Cc: stable@vger.kernel.org
Signed-off-by: Chris Mason <clm@meta.com>
Assisted-by: kres (claude-opus-4-7)
[cel: rewrote commit message to describe the actual change]
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 4e37f6452d upstream.
sk deref in sco_conn_ready must be done either under conn->lock, or
holding a refcount, to avoid concurrent close. conn->sk and parent sk is
currently accessed without either, and without checking parent->sk_state:
[Task 1] [Task 2]
sco_sock_release
sco_conn_ready
sk = conn->sk
lock_sock(sk)
conn->sk = NULL
lock_sock(sk)
release_sock(sk)
sco_sock_kill(sk)
UAF on sk deref
and similarly for access to sco_get_sock_listen() return value.
Fix possible UAF by holding sk refcount in sco_conn_ready() and making
sco_get_sock_listen() increase refcount. Also recheck after lock_sock
that the socket is still valid. Adjust conn->sk locking so it's
protected also by lock_sock() of the associated socket if any.
Fixes: 27c24fda62 ("Bluetooth: switch to lock_sock in SCO")
Signed-off-by: Pauli Virtanen <pav@iki.fi>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit b819db93d7 upstream.
sco_conn_ready calls sleeping functions under conn->lock spinlock.
The critical section can be reduced: conn->hcon is modified only with
hdev->lock held. It is guaranteed to be held in sco_conn_ready, so
conn->lock is not needed to guard it.
Move taking conn->lock after lock_sock(parent). This also follows the
lock ordering lock_sock() > conn->lock elsewhere in the file.
Fixes: 27c24fda62 ("Bluetooth: switch to lock_sock in SCO")
Signed-off-by: Pauli Virtanen <pav@iki.fi>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 82a4fc4633 upstream.
The DualShock 4 HID driver fails to validate the num_touch_reports field
received from the device in both USB and Bluetooth input reports.
A malicious device could set this field to a value larger than the
allocated size of the touch_reports array (3 for USB, 4 for Bluetooth),
leading to an out-of-bounds read in dualshock4_parse_report().
This can result in kernel memory disclosure when processing malicious
HID reports.
Validate num_touch_reports against the array size for the respective
connection types before processing the touch data.
Signed-off-by: Benoît Sevens <bsevens@google.com>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 3001ed2b4e upstream.
Platform devices created with platform_device_alloc() call
platform_device_release() when the last reference to the device's
kobject is dropped. This function calls of_node_put() unconditionally.
This works fine for devices created with platform_device_register_full()
but users of the split approach (platform_device_alloc() +
platform_device_add()) must bump the reference of the of_node they
assign manually. Add the missing call to of_node_get().
Cc: stable@vger.kernel.org
Fixes: 62f6b08793 ("tps6586x: Add device tree support")
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@oss.qualcomm.com>
Link: https://patch.msgid.link/20260521-pdev-fwnode-ref-v1-1-88c324a1b8d2@oss.qualcomm.com
Signed-off-by: Lee Jones <lee@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit f71d68d2b4 upstream.
Today we do not invalidate the cached_dirent or the entire
parent cfid when a dentry in a dir has been removed/moved.
This change invalidates the parent cfid so that we don't serve
directory contents from the cache.
Cc: <stable@vger.kernel.org>
Signed-off-by: Shyam Prasad N <sprasad@microsoft.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 7a581d9aab upstream.
A TT unicast TVLV contains the number of VLANs stored in it. This number is
an u16 and gets multiplied by the size of the struct
batadv_tvlv_tt_vlan_data (8 bytes). The size can therefore overflow the u16
used to store the tt_vlan_len. All additional safety checks to prevent
out-of-bounds access of the TVLV buffer are invalid due to this overflow.
Using size_t prevents this overflow and ensures that the safety checks
compare against the actual buffer requirements.
Cc: stable@vger.kernel.org
Fixes: 7ea7b4a142 ("batman-adv: make the TT CRC logic VLAN specific")
Signed-off-by: Sven Eckelmann <sven@narfation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 353d2c1d54 upstream.
If the skb has a frag_list, it must be linearized before it can be split
using skb_split(). But when this step failed, it must not only free the skb
but also take care of the reference to the already found primary_if.
Cc: stable@vger.kernel.org
Reported-by: Sashiko <sashiko-bot@kernel.org>
Fixes: a063f2fba3 ("batman-adv: Don't skb_split skbuffs with frag_list")
Signed-off-by: Sven Eckelmann <sven@narfation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 6b628425ae upstream.
The caller of batadv_frag_send_packet() assume that the skb provided to the
function are always consumed. But the pre-check for an empty payload or the
zero fragment size returned an error without any further actions.
A failed pre-check must use the same error handling code as the rest of the
function.
Cc: stable@vger.kernel.org
Fixes: ee75ed8887 ("batman-adv: Fragment and send skbs larger than mtu")
Signed-off-by: Sven Eckelmann <sven@narfation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit fdb3be00ba upstream.
The batadv_skb_set_priority() receives an SKB with the inner ethernet
header at position "offset". When it tries to extract the IPv4 and IPv6
header, it needs to skip the ethernet header to get access to the IP
header.
But for VLAN header, it performs the access with the struct vlan_ethhdr.
This struct contains both both the ethernet header and the VLAN header. It
is therefore incorrect to skip over the whole vlan_ethhdr size to get
access to the vlan_ethhdr.
Cc: stable@vger.kernel.org
Fixes: c54f38c9aa ("batman-adv: set skb priority according to content")
Signed-off-by: Sven Eckelmann <sven@narfation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 27c7d40008 upstream.
batadv_send_tt_request() allocates a tt_req_node when none exists for the
destination originator node. This should prevent that a multiple TT
requests are send at the same time to an originator.
But if allocation of the send buffer failed, this request must be cleaned
up again. But indicator for such a failure is "ret == false". But the
actual implementation is checking for "ret == true".
The check must be inverted to not loose the information about the TT
request directly after it was attempted to be sent out. This should avoid
potential request storms.
Cc: stable@vger.kernel.org
Fixes: 335fbe0f5d ("batman-adv: tvlv - convert tt query packet to use tvlv unicast packets")
Signed-off-by: Sven Eckelmann <sven@narfation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 98052bdaf6 upstream.
The original version of the candidate selection for DAT attempted to
compare both candidate and max_orig_node to identify which has the smaller
MAC address. This comparison is required as tie-break when a hash collision
happened.
But the used function returned 0 when the function was not equal and a
non-zero value when it was equal. As result, the actually selected
node was dependent on the order of entries in the orig_hash and not
actually on the mac addresses. The last originator in the hash collision
would always win.
To have a proper ordering, it must diff the actual MAC address bytes and
reject the candidate when the diff is not smaller than 0.
Cc: stable@vger.kernel.org
Fixes: 785ea11441 ("batman-adv: Distributed ARP Table - create DHT helper functions")
Signed-off-by: Sven Eckelmann <sven@narfation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 26560c4a03 upstream.
When batadv_get_vid() accesses the proto field of the ethernet header, it
is not checking if the data itself is accessible. The caller is responsible
for it. But in contrast to other call sites, batadv_dat_get_vid() and its
caller didn't make sure this is true. This could have caused an
out-of-bounds access.
Cc: stable@vger.kernel.org
Reported-by: Sashiko <sashiko-bot@kernel.org>
Fixes: be1db4f661 ("batman-adv: make the Distributed ARP Table vlan aware")
Signed-off-by: Sven Eckelmann <sven@narfation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Tristan Madani
Ionut Nechita
Martin Wilck
Breno Leitao
Ruoyu Wang
Muchun Song
Krzysztof Wilczyński
SeongJae Park
Zishun Yi
Aaron Tomlin
Michael Bommarito
Konstantin Komarov
Zhan Xusheng
Ma Ke
Maciej W. Rozycki
Johan Hovold
Wasim Nazir
Chuck Lever
Chris Mason
Abdun Nihaal
Junrui Luo
Pauli Virtanen
Benoît Sevens
Bartosz Golaszewski
Shyam Prasad N
Sven Eckelmann