mirror of
https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git
synced 2026-09-22 09:34:56 +02:00
6c9e0907fc8bc978e97bb78bbbc6e9bc8fc51cb3
894352
Commits
| Author | SHA1 | Message | Date | |
|---|---|---|---|---|
|
|
6c9e0907fc |
mm/vmscan.c: remove unused return value of shrink_node
The return value of shrink_node is not used, so remove unnecessary operations. Link: http://lkml.kernel.org/r/20191128143524.3223-1-fishland@aliyun.com Signed-off-by: Liu Song <liu.song11@zte.com.cn> Reviewed-by: David Hildenbrand <david@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> |
||
|
|
fe4c86c916 |
mm: remove "count" parameter from has_unmovable_pages()
Now that the memory isolate notifier is gone, the parameter is always 0. Drop it and cleanup has_unmovable_pages(). Link: http://lkml.kernel.org/r/20191114131911.11783-3-david@redhat.com Signed-off-by: David Hildenbrand <david@redhat.com> Acked-by: Michal Hocko <mhocko@suse.com> Cc: Oscar Salvador <osalvador@suse.de> Cc: Anshuman Khandual <anshuman.khandual@arm.com> Cc: Qian Cai <cai@lca.pw> Cc: Pingfan Liu <kernelfans@gmail.com> Cc: Stephen Rothwell <sfr@canb.auug.org.au> Cc: Dan Williams <dan.j.williams@intel.com> Cc: Pavel Tatashin <pasha.tatashin@soleen.com> Cc: Vlastimil Babka <vbabka@suse.cz> Cc: Mel Gorman <mgorman@techsingularity.net> Cc: Mike Rapoport <rppt@linux.vnet.ibm.com> Cc: Wei Yang <richardw.yang@linux.intel.com> Cc: Alexander Duyck <alexander.h.duyck@linux.intel.com> Cc: Alexander Potapenko <glider@google.com> Cc: Arun KS <arunks@codeaurora.org> Cc: Michael Ellerman <mpe@ellerman.id.au> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> |
||
|
|
3f9903b9ca |
mm: remove the memory isolate notifier
Luckily, we have no users left, so we can get rid of it. Cleanup set_migratetype_isolate() a little bit. Link: http://lkml.kernel.org/r/20191114131911.11783-2-david@redhat.com Signed-off-by: David Hildenbrand <david@redhat.com> Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Acked-by: Michal Hocko <mhocko@suse.com> Cc: "Rafael J. Wysocki" <rafael@kernel.org> Cc: Pavel Tatashin <pasha.tatashin@soleen.com> Cc: Dan Williams <dan.j.williams@intel.com> Cc: Oscar Salvador <osalvador@suse.de> Cc: Qian Cai <cai@lca.pw> Cc: Anshuman Khandual <anshuman.khandual@arm.com> Cc: Pingfan Liu <kernelfans@gmail.com> Cc: Michael Ellerman <mpe@ellerman.id.au> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> |
||
|
|
3f1353552e |
mm/page_alloc: skip non present sections on zone initialization
memmap_init_zone() can be called on the ranges with holes during the boot. It will skip any non-valid PFNs one-by-one. It works fine as long as holes are not too big. But huge holes in the memory map causes a problem. It takes over 20 seconds to walk 32TiB hole. x86-64 with 5-level paging allows for much larger holes in the memory map which would practically hang the system. Deferred struct page init doesn't help here. It only works on the present ranges. Skipping non-present sections would fix the issue. Link: http://lkml.kernel.org/r/20191230093828.24613-1-kirill.shutemov@linux.intel.com Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Reviewed-by: Baoquan He <bhe@redhat.com> Acked-by: Michal Hocko <mhocko@suse.com> Cc: Dan Williams <dan.j.williams@intel.com> Cc: Vlastimil Babka <vbabka@suse.cz> Cc: Mel Gorman <mgorman@suse.de> Cc: "Jin, Zhi" <zhi.jin@intel.com> Cc: David Hildenbrand <david@redhat.com> Cc: Michal Hocko <mhocko@kernel.org> Cc: Oscar Salvador <osalvador@suse.de> Cc: Pavel Tatashin <pasha.tatashin@oracle.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> |
||
|
|
7b69d79f94 |
mm/early_ioremap.c: use %pa to print resource_size_t variables
%pa takes into consideration the special types such as resource_size_t. Use this specifier %instead of explicit casting. Link: http://lkml.kernel.org/r/20191209165413.56263-1-andriy.shevchenko@linux.intel.com Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Reviewed-by: David Hildenbrand <david@redhat.com> Reviewed-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> |
||
|
|
3e21d9a501 |
lib/test_kasan.c: fix memory leak in kmalloc_oob_krealloc_more()
In case memory resources for _ptr2_ were allocated, release them before
return.
Notice that in case _ptr1_ happens to be NULL, krealloc() behaves
exactly like kmalloc().
Addresses-Coverity-ID: 1490594 ("Resource leak")
Link: http://lkml.kernel.org/r/20200123160115.GA4202@embeddedor
Fixes:
|
||
|
|
7e168b9bab |
mm, tracing: print symbol name for kmem_alloc_node call_site events
Print the call_site ip of kmem_alloc_node using '%pS' to improve the readability of raw slab trace points. Link: http://lkml.kernel.org/r/1577949568-4518-1-git-send-email-sunjunyong@xiaomi.com Signed-off-by: Junyong Sun <sunjunyong@xiaomi.com> Acked-by: Steven Rostedt (VMware) <rostedt@goodmis.org> Cc: Ingo Molnar <mingo@redhat.com> Cc: Joel Fernandes (Google) <joel@joelfernandes.org> Cc: Changbin Du <changbin.du@intel.com> Cc: Tim Murray <timmurray@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> |
||
|
|
5b8d6e37b5 |
mm/page_vma_mapped.c: explicitly compare pfn for normal, hugetlbfs and THP page
When check_pte, pfn of normal, hugetlbfs and THP page need be compared. The current implementation apply comparison as - normal 4K page: page_pfn <= pfn < page_pfn + 1 - hugetlbfs page: page_pfn <= pfn < page_pfn + HPAGE_PMD_NR - THP page: page_pfn <= pfn < page_pfn + HPAGE_PMD_NR in pfn_in_hpage. For hugetlbfs page, it should be page_pfn == pfn Now, change pfn_in_hpage to pfn_is_match to highlight that comparison is not only for THP and explicitly compare for these cases. No impact upon current behavior, just make the code clear. I think it is important to make the code clear - comparing hugetlbfs page in range page_pfn <= pfn < page_pfn + HPAGE_PMD_NR is confusing. Link: http://lkml.kernel.org/r/1578737885-8890-1-git-send-email-lixinhai.lxh@gmail.com Signed-off-by: Li Xinhai <lixinhai.lxh@gmail.com> Acked-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Acked-by: Mike Kravetz <mike.kravetz@oracle.com> Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Cc: Michal Hocko <mhocko@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> |
||
|
|
92855270ff |
mm/memcontrol.c: cleanup some useless code
Compound pages handling in mem_cgroup_migrate is more convoluted than necessary. The state is duplicated in compound variable and the same could be achieved by PageTransHuge check which is trivial and hpage_nr_pages is already PageTransHuge aware. It is much simpler to just use hpage_nr_pages for nr_pages and replace the local variable by PageTransHuge check directly Link: http://lkml.kernel.org/r/20191210160450.3395-1-pilgrimtao@gmail.com Signed-off-by: Kaitao Cheng <pilgrimtao@gmail.com> Acked-by: Michal Hocko <mhocko@suse.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Vladimir Davydov <vdavydov.dev@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> |
||
|
|
10c8d69f31 |
mm/swapfile.c: swap_next should increase position index
If seq_file .next fuction does not change position index, read after some lseek can generate unexpected output. In Aug 2018 NeilBrown noticed commit |
||
|
|
f1f6a7dd9b |
mm, tree-wide: rename put_user_page*() to unpin_user_page*()
In order to provide a clearer, more symmetric API for pinning and unpinning DMA pages. This way, pin_user_pages*() calls match up with unpin_user_pages*() calls, and the API is a lot closer to being self-explanatory. Link: http://lkml.kernel.org/r/20200107224558.2362728-23-jhubbard@nvidia.com Signed-off-by: John Hubbard <jhubbard@nvidia.com> Reviewed-by: Jan Kara <jack@suse.cz> Cc: Alex Williamson <alex.williamson@redhat.com> Cc: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com> Cc: Björn Töpel <bjorn.topel@intel.com> Cc: Christoph Hellwig <hch@lst.de> Cc: Daniel Vetter <daniel.vetter@ffwll.ch> Cc: Dan Williams <dan.j.williams@intel.com> Cc: Hans Verkuil <hverkuil-cisco@xs4all.nl> Cc: Ira Weiny <ira.weiny@intel.com> Cc: Jason Gunthorpe <jgg@mellanox.com> Cc: Jason Gunthorpe <jgg@ziepe.ca> Cc: Jens Axboe <axboe@kernel.dk> Cc: Jerome Glisse <jglisse@redhat.com> Cc: Jonathan Corbet <corbet@lwn.net> Cc: Kirill A. Shutemov <kirill@shutemov.name> Cc: Leon Romanovsky <leonro@mellanox.com> Cc: Mauro Carvalho Chehab <mchehab@kernel.org> Cc: Mike Rapoport <rppt@linux.ibm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> |
||
|
|
bdffe23eee |
mm/gup_benchmark: use proper FOLL_WRITE flags instead of hard-coding "1"
Fix the gup benchmark flags to use the symbolic FOLL_WRITE, instead of a hard-coded "1" value. Also, clean up the filtering of gup flags a little, by just doing it once before issuing any of the get_user_pages*() calls. This makes it harder to overlook, instead of having little "gup_flags & 1" phrases in the function calls. Link: http://lkml.kernel.org/r/20200107224558.2362728-22-jhubbard@nvidia.com Signed-off-by: John Hubbard <jhubbard@nvidia.com> Reviewed-by: Ira Weiny <ira.weiny@intel.com> Cc: Alex Williamson <alex.williamson@redhat.com> Cc: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com> Cc: Björn Töpel <bjorn.topel@intel.com> Cc: Christoph Hellwig <hch@lst.de> Cc: Daniel Vetter <daniel.vetter@ffwll.ch> Cc: Dan Williams <dan.j.williams@intel.com> Cc: Hans Verkuil <hverkuil-cisco@xs4all.nl> Cc: Jan Kara <jack@suse.cz> Cc: Jason Gunthorpe <jgg@mellanox.com> Cc: Jason Gunthorpe <jgg@ziepe.ca> Cc: Jens Axboe <axboe@kernel.dk> Cc: Jerome Glisse <jglisse@redhat.com> Cc: Jonathan Corbet <corbet@lwn.net> Cc: Kirill A. Shutemov <kirill@shutemov.name> Cc: Leon Romanovsky <leonro@mellanox.com> Cc: Mauro Carvalho Chehab <mchehab@kernel.org> Cc: Mike Rapoport <rppt@linux.ibm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> |
||
|
|
aa4b87fe9e |
powerpc: book3s64: convert to pin_user_pages() and put_user_page()
1. Convert from get_user_pages() to pin_user_pages(). 2. As required by pin_user_pages(), release these pages via put_user_page(). Link: http://lkml.kernel.org/r/20200107224558.2362728-21-jhubbard@nvidia.com Signed-off-by: John Hubbard <jhubbard@nvidia.com> Reviewed-by: Jan Kara <jack@suse.cz> Cc: Alex Williamson <alex.williamson@redhat.com> Cc: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com> Cc: Björn Töpel <bjorn.topel@intel.com> Cc: Christoph Hellwig <hch@lst.de> Cc: Daniel Vetter <daniel.vetter@ffwll.ch> Cc: Dan Williams <dan.j.williams@intel.com> Cc: Hans Verkuil <hverkuil-cisco@xs4all.nl> Cc: Ira Weiny <ira.weiny@intel.com> Cc: Jason Gunthorpe <jgg@mellanox.com> Cc: Jason Gunthorpe <jgg@ziepe.ca> Cc: Jens Axboe <axboe@kernel.dk> Cc: Jerome Glisse <jglisse@redhat.com> Cc: Jonathan Corbet <corbet@lwn.net> Cc: Kirill A. Shutemov <kirill@shutemov.name> Cc: Leon Romanovsky <leonro@mellanox.com> Cc: Mauro Carvalho Chehab <mchehab@kernel.org> Cc: Mike Rapoport <rppt@linux.ibm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> |
||
|
|
19fed0dae9 |
vfio, mm: pin_user_pages (FOLL_PIN) and put_user_page() conversion
1. Change vfio from get_user_pages_remote(), to pin_user_pages_remote(). 2. Because all FOLL_PIN-acquired pages must be released via put_user_page(), also convert the put_page() call over to put_user_pages_dirty_lock(). Note that this effectively changes the code's behavior in vfio_iommu_type1.c: put_pfn(): it now ultimately calls set_page_dirty_lock(), instead of set_page_dirty(). This is probably more accurate. As Christoph Hellwig put it, "set_page_dirty() is only safe if we are dealing with a file backed page where we have reference on the inode it hangs off." [1] [1] https://lore.kernel.org/r/20190723153640.GB720@lst.de Link: http://lkml.kernel.org/r/20200107224558.2362728-20-jhubbard@nvidia.com Signed-off-by: John Hubbard <jhubbard@nvidia.com> Tested-by: Alex Williamson <alex.williamson@redhat.com> Acked-by: Alex Williamson <alex.williamson@redhat.com> Cc: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com> Cc: Björn Töpel <bjorn.topel@intel.com> Cc: Christoph Hellwig <hch@lst.de> Cc: Daniel Vetter <daniel.vetter@ffwll.ch> Cc: Dan Williams <dan.j.williams@intel.com> Cc: Hans Verkuil <hverkuil-cisco@xs4all.nl> Cc: Ira Weiny <ira.weiny@intel.com> Cc: Jan Kara <jack@suse.cz> Cc: Jason Gunthorpe <jgg@mellanox.com> Cc: Jason Gunthorpe <jgg@ziepe.ca> Cc: Jens Axboe <axboe@kernel.dk> Cc: Jerome Glisse <jglisse@redhat.com> Cc: Jonathan Corbet <corbet@lwn.net> Cc: Kirill A. Shutemov <kirill@shutemov.name> Cc: Leon Romanovsky <leonro@mellanox.com> Cc: Mauro Carvalho Chehab <mchehab@kernel.org> Cc: Mike Rapoport <rppt@linux.ibm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> |
||
|
|
1f815afcfc |
media/v4l2-core: pin_user_pages (FOLL_PIN) and put_user_page() conversion
1. Change v4l2 from get_user_pages() to pin_user_pages(). 2. Because all FOLL_PIN-acquired pages must be released via put_user_page(), also convert the put_page() call over to put_user_pages_dirty_lock(). Link: http://lkml.kernel.org/r/20200107224558.2362728-19-jhubbard@nvidia.com Signed-off-by: John Hubbard <jhubbard@nvidia.com> Acked-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Cc: Ira Weiny <ira.weiny@intel.com> Cc: Alex Williamson <alex.williamson@redhat.com> Cc: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com> Cc: Björn Töpel <bjorn.topel@intel.com> Cc: Christoph Hellwig <hch@lst.de> Cc: Daniel Vetter <daniel.vetter@ffwll.ch> Cc: Dan Williams <dan.j.williams@intel.com> Cc: Jan Kara <jack@suse.cz> Cc: Jason Gunthorpe <jgg@mellanox.com> Cc: Jason Gunthorpe <jgg@ziepe.ca> Cc: Jens Axboe <axboe@kernel.dk> Cc: Jerome Glisse <jglisse@redhat.com> Cc: Jonathan Corbet <corbet@lwn.net> Cc: Kirill A. Shutemov <kirill@shutemov.name> Cc: Leon Romanovsky <leonro@mellanox.com> Cc: Mauro Carvalho Chehab <mchehab@kernel.org> Cc: Mike Rapoport <rppt@linux.ibm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> |
||
|
|
fb48b4746a |
net/xdp: set FOLL_PIN via pin_user_pages()
Convert net/xdp to use the new pin_longterm_pages() call, which sets FOLL_PIN. Setting FOLL_PIN is now required for code that requires tracking of pinned pages. In partial anticipation of this work, the net/xdp code was already calling put_user_page() instead of put_page(). Therefore, in order to convert from the get_user_pages()/put_page() model, to the pin_user_pages()/put_user_page() model, the only change required here is to change get_user_pages() to pin_user_pages(). Link: http://lkml.kernel.org/r/20200107224558.2362728-18-jhubbard@nvidia.com Signed-off-by: John Hubbard <jhubbard@nvidia.com> Acked-by: Björn Töpel <bjorn.topel@intel.com> Cc: Alex Williamson <alex.williamson@redhat.com> Cc: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com> Cc: Christoph Hellwig <hch@lst.de> Cc: Daniel Vetter <daniel.vetter@ffwll.ch> Cc: Dan Williams <dan.j.williams@intel.com> Cc: Hans Verkuil <hverkuil-cisco@xs4all.nl> Cc: Ira Weiny <ira.weiny@intel.com> Cc: Jan Kara <jack@suse.cz> Cc: Jason Gunthorpe <jgg@mellanox.com> Cc: Jason Gunthorpe <jgg@ziepe.ca> Cc: Jens Axboe <axboe@kernel.dk> Cc: Jerome Glisse <jglisse@redhat.com> Cc: Jonathan Corbet <corbet@lwn.net> Cc: Kirill A. Shutemov <kirill@shutemov.name> Cc: Leon Romanovsky <leonro@mellanox.com> Cc: Mauro Carvalho Chehab <mchehab@kernel.org> Cc: Mike Rapoport <rppt@linux.ibm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> |
||
|
|
2113b05d03 |
fs/io_uring: set FOLL_PIN via pin_user_pages()
Convert fs/io_uring to use the new pin_user_pages() call, which sets FOLL_PIN. Setting FOLL_PIN is now required for code that requires tracking of pinned pages, and therefore for any code that calls put_user_page(). In partial anticipation of this work, the io_uring code was already calling put_user_page() instead of put_page(). Therefore, in order to convert from the get_user_pages()/put_page() model, to the pin_user_pages()/put_user_page() model, the only change required here is to change get_user_pages() to pin_user_pages(). Link: http://lkml.kernel.org/r/20200107224558.2362728-17-jhubbard@nvidia.com Signed-off-by: John Hubbard <jhubbard@nvidia.com> Reviewed-by: Jens Axboe <axboe@kernel.dk> Reviewed-by: Jan Kara <jack@suse.cz> Cc: Alex Williamson <alex.williamson@redhat.com> Cc: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com> Cc: Björn Töpel <bjorn.topel@intel.com> Cc: Christoph Hellwig <hch@lst.de> Cc: Daniel Vetter <daniel.vetter@ffwll.ch> Cc: Dan Williams <dan.j.williams@intel.com> Cc: Hans Verkuil <hverkuil-cisco@xs4all.nl> Cc: Ira Weiny <ira.weiny@intel.com> Cc: Jason Gunthorpe <jgg@mellanox.com> Cc: Jason Gunthorpe <jgg@ziepe.ca> Cc: Jerome Glisse <jglisse@redhat.com> Cc: Jonathan Corbet <corbet@lwn.net> Cc: Kirill A. Shutemov <kirill@shutemov.name> Cc: Leon Romanovsky <leonro@mellanox.com> Cc: Mauro Carvalho Chehab <mchehab@kernel.org> Cc: Mike Rapoport <rppt@linux.ibm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> |
||
|
|
a5adf0a08b |
drm/via: set FOLL_PIN via pin_user_pages_fast()
Convert drm/via to use the new pin_user_pages_fast() call, which sets FOLL_PIN. Setting FOLL_PIN is now required for code that requires tracking of pinned pages, and therefore for any code that calls put_user_page(). In partial anticipation of this work, the drm/via driver was already calling put_user_page() instead of put_page(). Therefore, in order to convert from the get_user_pages()/put_page() model, to the pin_user_pages()/put_user_page() model, the only change required is to change get_user_pages() to pin_user_pages(). Link: http://lkml.kernel.org/r/20200107224558.2362728-16-jhubbard@nvidia.com Signed-off-by: John Hubbard <jhubbard@nvidia.com> Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch> Reviewed-by: Jérôme Glisse <jglisse@redhat.com> Reviewed-by: Ira Weiny <ira.weiny@intel.com> Cc: Alex Williamson <alex.williamson@redhat.com> Cc: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com> Cc: Björn Töpel <bjorn.topel@intel.com> Cc: Christoph Hellwig <hch@lst.de> Cc: Dan Williams <dan.j.williams@intel.com> Cc: Hans Verkuil <hverkuil-cisco@xs4all.nl> Cc: Jan Kara <jack@suse.cz> Cc: Jason Gunthorpe <jgg@mellanox.com> Cc: Jason Gunthorpe <jgg@ziepe.ca> Cc: Jens Axboe <axboe@kernel.dk> Cc: Jonathan Corbet <corbet@lwn.net> Cc: Kirill A. Shutemov <kirill@shutemov.name> Cc: Leon Romanovsky <leonro@mellanox.com> Cc: Mauro Carvalho Chehab <mchehab@kernel.org> Cc: Mike Rapoport <rppt@linux.ibm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> |
||
|
|
803e4572d7 |
mm/process_vm_access: set FOLL_PIN via pin_user_pages_remote()
Convert process_vm_access to use the new pin_user_pages_remote() call, which sets FOLL_PIN. Setting FOLL_PIN is now required for code that requires tracking of pinned pages. Also, release the pages via put_user_page*(). Also, rename "pages" to "pinned_pages", as this makes for easier reading of process_vm_rw_single_vec(). Link: http://lkml.kernel.org/r/20200107224558.2362728-15-jhubbard@nvidia.com Signed-off-by: John Hubbard <jhubbard@nvidia.com> Reviewed-by: Jan Kara <jack@suse.cz> Reviewed-by: Jérôme Glisse <jglisse@redhat.com> Reviewed-by: Ira Weiny <ira.weiny@intel.com> Cc: Alex Williamson <alex.williamson@redhat.com> Cc: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com> Cc: Björn Töpel <bjorn.topel@intel.com> Cc: Christoph Hellwig <hch@lst.de> Cc: Daniel Vetter <daniel.vetter@ffwll.ch> Cc: Dan Williams <dan.j.williams@intel.com> Cc: Hans Verkuil <hverkuil-cisco@xs4all.nl> Cc: Jason Gunthorpe <jgg@mellanox.com> Cc: Jason Gunthorpe <jgg@ziepe.ca> Cc: Jens Axboe <axboe@kernel.dk> Cc: Jonathan Corbet <corbet@lwn.net> Cc: Kirill A. Shutemov <kirill@shutemov.name> Cc: Leon Romanovsky <leonro@mellanox.com> Cc: Mauro Carvalho Chehab <mchehab@kernel.org> Cc: Mike Rapoport <rppt@linux.ibm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> |
||
|
|
dfa0a4fff1 |
IB/{core,hw,umem}: set FOLL_PIN via pin_user_pages*(), fix up ODP
Convert infiniband to use the new pin_user_pages*() calls. Also, revert earlier changes to Infiniband ODP that had it using put_user_page(). ODP is "Case 3" in Documentation/core-api/pin_user_pages.rst, which is to say, normal get_user_pages() and put_page() is the API to use there. The new pin_user_pages*() calls replace corresponding get_user_pages*() calls, and set the FOLL_PIN flag. The FOLL_PIN flag requires that the caller must return the pages via put_user_page*() calls, but infiniband was already doing that as part of an earlier commit. Link: http://lkml.kernel.org/r/20200107224558.2362728-14-jhubbard@nvidia.com Signed-off-by: John Hubbard <jhubbard@nvidia.com> Reviewed-by: Jason Gunthorpe <jgg@mellanox.com> Cc: Alex Williamson <alex.williamson@redhat.com> Cc: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com> Cc: Björn Töpel <bjorn.topel@intel.com> Cc: Christoph Hellwig <hch@lst.de> Cc: Daniel Vetter <daniel.vetter@ffwll.ch> Cc: Dan Williams <dan.j.williams@intel.com> Cc: Hans Verkuil <hverkuil-cisco@xs4all.nl> Cc: Ira Weiny <ira.weiny@intel.com> Cc: Jan Kara <jack@suse.cz> Cc: Jason Gunthorpe <jgg@ziepe.ca> Cc: Jens Axboe <axboe@kernel.dk> Cc: Jerome Glisse <jglisse@redhat.com> Cc: Jonathan Corbet <corbet@lwn.net> Cc: Kirill A. Shutemov <kirill@shutemov.name> Cc: Leon Romanovsky <leonro@mellanox.com> Cc: Mauro Carvalho Chehab <mchehab@kernel.org> Cc: Mike Rapoport <rppt@linux.ibm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> |
||
|
|
57459435cf |
goldish_pipe: convert to pin_user_pages() and put_user_page()
1. Call the new global pin_user_pages_fast(), from pin_goldfish_pages(). 2. As required by pin_user_pages(), release these pages via put_user_page(). In this case, do so via put_user_pages_dirty_lock(). That has the side effect of calling set_page_dirty_lock(), instead of set_page_dirty(). This is probably more accurate. As Christoph Hellwig put it, "set_page_dirty() is only safe if we are dealing with a file backed page where we have reference on the inode it hangs off." [1] Another side effect is that the release code is simplified because the page[] loop is now in gup.c instead of here, so just delete the local release_user_pages() entirely, and call put_user_pages_dirty_lock() directly, instead. [1] https://lore.kernel.org/r/20190723153640.GB720@lst.de Link: http://lkml.kernel.org/r/20200107224558.2362728-13-jhubbard@nvidia.com Signed-off-by: John Hubbard <jhubbard@nvidia.com> Reviewed-by: Jan Kara <jack@suse.cz> Reviewed-by: Ira Weiny <ira.weiny@intel.com> Cc: Alex Williamson <alex.williamson@redhat.com> Cc: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com> Cc: Björn Töpel <bjorn.topel@intel.com> Cc: Christoph Hellwig <hch@lst.de> Cc: Daniel Vetter <daniel.vetter@ffwll.ch> Cc: Dan Williams <dan.j.williams@intel.com> Cc: Hans Verkuil <hverkuil-cisco@xs4all.nl> Cc: Jason Gunthorpe <jgg@mellanox.com> Cc: Jason Gunthorpe <jgg@ziepe.ca> Cc: Jens Axboe <axboe@kernel.dk> Cc: Jerome Glisse <jglisse@redhat.com> Cc: Jonathan Corbet <corbet@lwn.net> Cc: Kirill A. Shutemov <kirill@shutemov.name> Cc: Leon Romanovsky <leonro@mellanox.com> Cc: Mauro Carvalho Chehab <mchehab@kernel.org> Cc: Mike Rapoport <rppt@linux.ibm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> |
||
|
|
eddb1c228f |
mm/gup: introduce pin_user_pages*() and FOLL_PIN
Introduce pin_user_pages*() variations of get_user_pages*() calls, and
also pin_longterm_pages*() variations.
For now, these are placeholder calls, until the various call sites are
converted to use the correct get_user_pages*() or pin_user_pages*() API.
These variants will eventually all set FOLL_PIN, which is also
introduced, and thoroughly documented.
pin_user_pages()
pin_user_pages_remote()
pin_user_pages_fast()
All pages that are pinned via the above calls, must be unpinned via
put_user_page().
The underlying rules are:
* FOLL_PIN is a gup-internal flag, so the call sites should not directly
set it. That behavior is enforced with assertions.
* Call sites that want to indicate that they are going to do DirectIO
("DIO") or something with similar characteristics, should call a
get_user_pages()-like wrapper call that sets FOLL_PIN. These wrappers
will:
* Start with "pin_user_pages" instead of "get_user_pages". That
makes it easy to find and audit the call sites.
* Set FOLL_PIN
* For pages that are received via FOLL_PIN, those pages must be returned
via put_user_page().
Thanks to Jan Kara and Vlastimil Babka for explaining the 4 cases in
this documentation. (I've reworded it and expanded upon it.)
Link: http://lkml.kernel.org/r/20200107224558.2362728-12-jhubbard@nvidia.com
Signed-off-by: John Hubbard <jhubbard@nvidia.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Reviewed-by: Mike Rapoport <rppt@linux.ibm.com> [Documentation]
Reviewed-by: Jérôme Glisse <jglisse@redhat.com>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Ira Weiny <ira.weiny@intel.com>
Cc: Alex Williamson <alex.williamson@redhat.com>
Cc: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com>
Cc: Björn Töpel <bjorn.topel@intel.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: Dan Williams <dan.j.williams@intel.com>
Cc: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Cc: Jason Gunthorpe <jgg@mellanox.com>
Cc: Jason Gunthorpe <jgg@ziepe.ca>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: Kirill A. Shutemov <kirill@shutemov.name>
Cc: Leon Romanovsky <leonro@mellanox.com>
Cc: Mauro Carvalho Chehab <mchehab@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
||
|
|
3c7470b6f6 |
media/v4l2-core: set pages dirty upon releasing DMA buffers
After DMA is complete, and the device and CPU caches are synchronized, it's still required to mark the CPU pages as dirty, if the data was coming from the device. However, this driver was just issuing a bare put_page() call, without any set_page_dirty*() call. Fix the problem, by calling set_page_dirty_lock() if the CPU pages were potentially receiving data from the device. Link: http://lkml.kernel.org/r/20200107224558.2362728-11-jhubbard@nvidia.com Signed-off-by: John Hubbard <jhubbard@nvidia.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Acked-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Cc: Mauro Carvalho Chehab <mchehab@kernel.org> Cc: <stable@vger.kernel.org> Cc: Alex Williamson <alex.williamson@redhat.com> Cc: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com> Cc: Björn Töpel <bjorn.topel@intel.com> Cc: Daniel Vetter <daniel.vetter@ffwll.ch> Cc: Dan Williams <dan.j.williams@intel.com> Cc: Ira Weiny <ira.weiny@intel.com> Cc: Jan Kara <jack@suse.cz> Cc: Jason Gunthorpe <jgg@mellanox.com> Cc: Jason Gunthorpe <jgg@ziepe.ca> Cc: Jens Axboe <axboe@kernel.dk> Cc: Jerome Glisse <jglisse@redhat.com> Cc: Jonathan Corbet <corbet@lwn.net> Cc: Kirill A. Shutemov <kirill@shutemov.name> Cc: Leon Romanovsky <leonro@mellanox.com> Cc: Mike Rapoport <rppt@linux.ibm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> |
||
|
|
4789fcdd14 |
IB/umem: use get_user_pages_fast() to pin DMA pages
And get rid of the mmap_sem calls, as part of that. Note that get_user_pages_fast() will, if necessary, fall back to __gup_longterm_unlocked(), which takes the mmap_sem as needed. Link: http://lkml.kernel.org/r/20200107224558.2362728-10-jhubbard@nvidia.com Signed-off-by: John Hubbard <jhubbard@nvidia.com> Reviewed-by: Leon Romanovsky <leonro@mellanox.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Jan Kara <jack@suse.cz> Reviewed-by: Jason Gunthorpe <jgg@mellanox.com> Reviewed-by: Ira Weiny <ira.weiny@intel.com> Cc: Alex Williamson <alex.williamson@redhat.com> Cc: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com> Cc: Björn Töpel <bjorn.topel@intel.com> Cc: Daniel Vetter <daniel.vetter@ffwll.ch> Cc: Dan Williams <dan.j.williams@intel.com> Cc: Hans Verkuil <hverkuil-cisco@xs4all.nl> Cc: Jason Gunthorpe <jgg@ziepe.ca> Cc: Jens Axboe <axboe@kernel.dk> Cc: Jerome Glisse <jglisse@redhat.com> Cc: Jonathan Corbet <corbet@lwn.net> Cc: Kirill A. Shutemov <kirill@shutemov.name> Cc: Mauro Carvalho Chehab <mchehab@kernel.org> Cc: Mike Rapoport <rppt@linux.ibm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> |
||
|
|
f4000fdf43 |
mm/gup: allow FOLL_FORCE for get_user_pages_fast()
Commit |
||
|
|
3567813eae |
vfio: fix FOLL_LONGTERM use, simplify get_user_pages_remote() call
Update VFIO to take advantage of the recently loosened restriction on
FOLL_LONGTERM with get_user_pages_remote(). Also, now it is possible to
fix a bug: the VFIO caller is logically a FOLL_LONGTERM user, but it
wasn't setting FOLL_LONGTERM.
Also, remove an unnessary pair of calls that were releasing and
reacquiring the mmap_sem. There is no need to avoid holding mmap_sem
just in order to call page_to_pfn().
Also, now that the the DAX check ("if a VMA is DAX, don't allow long
term pinning") is in the internals of get_user_pages_remote() and
__gup_longterm_locked(), there's no need for it at the VFIO call site. So
remove it.
Link: http://lkml.kernel.org/r/20200107224558.2362728-8-jhubbard@nvidia.com
Signed-off-by: John Hubbard <jhubbard@nvidia.com>
Tested-by: Alex Williamson <alex.williamson@redhat.com>
Acked-by: Alex Williamson <alex.williamson@redhat.com>
Reviewed-by: Jason Gunthorpe <jgg@mellanox.com>
Reviewed-by: Ira Weiny <ira.weiny@intel.com>
Suggested-by: Jason Gunthorpe <jgg@ziepe.ca>
Cc: Dan Williams <dan.j.williams@intel.com>
Cc: Jerome Glisse <jglisse@redhat.com>
Cc: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com>
Cc: Björn Töpel <bjorn.topel@intel.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Cc: Jan Kara <jack@suse.cz>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Kirill A. Shutemov <kirill@shutemov.name>
Cc: Leon Romanovsky <leonro@mellanox.com>
Cc: Mauro Carvalho Chehab <mchehab@kernel.org>
Cc: Mike Rapoport <rppt@linux.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
||
|
|
c4237f8b1f |
mm: fix get_user_pages_remote()'s handling of FOLL_LONGTERM
As it says in the updated comment in gup.c: current FOLL_LONGTERM
behavior is incompatible with FAULT_FLAG_ALLOW_RETRY because of the FS
DAX check requirement on vmas.
However, the corresponding restriction in get_user_pages_remote() was
slightly stricter than is actually required: it forbade all
FOLL_LONGTERM callers, but we can actually allow FOLL_LONGTERM callers
that do not set the "locked" arg.
Update the code and comments to loosen the restriction, allowing
FOLL_LONGTERM in some cases.
Also, copy the DAX check ("if a VMA is DAX, don't allow long term
pinning") from the VFIO call site, all the way into the internals of
get_user_pages_remote() and __gup_longterm_locked(). That is:
get_user_pages_remote() calls __gup_longterm_locked(), which in turn
calls check_dax_vmas(). This check will then be removed from the VFIO
call site in a subsequent patch.
Thanks to Jason Gunthorpe for pointing out a clean way to fix this, and
to Dan Williams for helping clarify the DAX refactoring.
Link: http://lkml.kernel.org/r/20200107224558.2362728-7-jhubbard@nvidia.com
Signed-off-by: John Hubbard <jhubbard@nvidia.com>
Tested-by: Alex Williamson <alex.williamson@redhat.com>
Acked-by: Alex Williamson <alex.williamson@redhat.com>
Reviewed-by: Jason Gunthorpe <jgg@mellanox.com>
Reviewed-by: Ira Weiny <ira.weiny@intel.com>
Suggested-by: Jason Gunthorpe <jgg@ziepe.ca>
Cc: Kirill A. Shutemov <kirill@shutemov.name>
Cc: Dan Williams <dan.j.williams@intel.com>
Cc: Jerome Glisse <jglisse@redhat.com>
Cc: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com>
Cc: Björn Töpel <bjorn.topel@intel.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Cc: Jan Kara <jack@suse.cz>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Leon Romanovsky <leonro@mellanox.com>
Cc: Mauro Carvalho Chehab <mchehab@kernel.org>
Cc: Mike Rapoport <rppt@linux.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
||
|
|
1023369c6e |
goldish_pipe: rename local pin_user_pages() routine
Avoid naming conflicts: rename local static function from "pin_user_pages()" to "goldfish_pin_pages()". An upcoming patch will introduce a global pin_user_pages() function. Link: http://lkml.kernel.org/r/20200107224558.2362728-6-jhubbard@nvidia.com Signed-off-by: John Hubbard <jhubbard@nvidia.com> Reviewed-by: Jan Kara <jack@suse.cz> Reviewed-by: Jérôme Glisse <jglisse@redhat.com> Reviewed-by: Ira Weiny <ira.weiny@intel.com> Cc: Alex Williamson <alex.williamson@redhat.com> Cc: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com> Cc: Björn Töpel <bjorn.topel@intel.com> Cc: Christoph Hellwig <hch@lst.de> Cc: Daniel Vetter <daniel.vetter@ffwll.ch> Cc: Dan Williams <dan.j.williams@intel.com> Cc: Hans Verkuil <hverkuil-cisco@xs4all.nl> Cc: Jason Gunthorpe <jgg@mellanox.com> Cc: Jason Gunthorpe <jgg@ziepe.ca> Cc: Jens Axboe <axboe@kernel.dk> Cc: Jonathan Corbet <corbet@lwn.net> Cc: Kirill A. Shutemov <kirill@shutemov.name> Cc: Leon Romanovsky <leonro@mellanox.com> Cc: Mauro Carvalho Chehab <mchehab@kernel.org> Cc: Mike Rapoport <rppt@linux.ibm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> |
||
|
|
07d8026995 |
mm: devmap: refactor 1-based refcounting for ZONE_DEVICE pages
An upcoming patch changes and complicates the refcounting and especially the "put page" aspects of it. In order to keep everything clean, refactor the devmap page release routines: * Rename put_devmap_managed_page() to page_is_devmap_managed(), and limit the functionality to "read only": return a bool, with no side effects. * Add a new routine, put_devmap_managed_page(), to handle decrementing the refcount for ZONE_DEVICE pages. * Change callers (just release_pages() and put_page()) to check page_is_devmap_managed() before calling the new put_devmap_managed_page() routine. This is a performance point: put_page() is a hot path, so we need to avoid non- inline function calls where possible. * Rename __put_devmap_managed_page() to free_devmap_managed_page(), and limit the functionality to unconditionally freeing a devmap page. This is originally based on a separate patch by Ira Weiny, which applied to an early version of the put_user_page() experiments. Since then, Jérôme Glisse suggested the refactoring described above. Link: http://lkml.kernel.org/r/20200107224558.2362728-5-jhubbard@nvidia.com Signed-off-by: Ira Weiny <ira.weiny@intel.com> Signed-off-by: John Hubbard <jhubbard@nvidia.com> Suggested-by: Jérôme Glisse <jglisse@redhat.com> Reviewed-by: Dan Williams <dan.j.williams@intel.com> Reviewed-by: Jan Kara <jack@suse.cz> Cc: Christoph Hellwig <hch@lst.de> Cc: Kirill A. Shutemov <kirill@shutemov.name> Cc: Alex Williamson <alex.williamson@redhat.com> Cc: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com> Cc: Björn Töpel <bjorn.topel@intel.com> Cc: Daniel Vetter <daniel.vetter@ffwll.ch> Cc: Hans Verkuil <hverkuil-cisco@xs4all.nl> Cc: Jason Gunthorpe <jgg@mellanox.com> Cc: Jason Gunthorpe <jgg@ziepe.ca> Cc: Jens Axboe <axboe@kernel.dk> Cc: Jonathan Corbet <corbet@lwn.net> Cc: Leon Romanovsky <leonro@mellanox.com> Cc: Mauro Carvalho Chehab <mchehab@kernel.org> Cc: Mike Rapoport <rppt@linux.ibm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> |
||
|
|
429589d647 |
mm: Cleanup __put_devmap_managed_page() vs ->page_free()
After the removal of the device-public infrastructure there are only 2 ->page_free() call backs in the kernel. One of those is a device-private callback in the nouveau driver, the other is a generic wakeup needed in the DAX case. In the hopes that all ->page_free() callbacks can be migrated to common core kernel functionality, move the device-private specific actions in __put_devmap_managed_page() under the is_device_private_page() conditional, including the ->page_free() callback. For the other page types just open-code the generic wakeup. Yes, the wakeup is only needed in the MEMORY_DEVICE_FSDAX case, but it does no harm in the MEMORY_DEVICE_DEVDAX and MEMORY_DEVICE_PCI_P2PDMA case. Link: http://lkml.kernel.org/r/20200107224558.2362728-4-jhubbard@nvidia.com Signed-off-by: Dan Williams <dan.j.williams@intel.com> Signed-off-by: John Hubbard <jhubbard@nvidia.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Jérôme Glisse <jglisse@redhat.com> Cc: Jan Kara <jack@suse.cz> Cc: Ira Weiny <ira.weiny@intel.com> Cc: Alex Williamson <alex.williamson@redhat.com> Cc: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com> Cc: Björn Töpel <bjorn.topel@intel.com> Cc: Daniel Vetter <daniel.vetter@ffwll.ch> Cc: Hans Verkuil <hverkuil-cisco@xs4all.nl> Cc: Jason Gunthorpe <jgg@mellanox.com> Cc: Jason Gunthorpe <jgg@ziepe.ca> Cc: Jens Axboe <axboe@kernel.dk> Cc: Jonathan Corbet <corbet@lwn.net> Cc: Kirill A. Shutemov <kirill@shutemov.name> Cc: Leon Romanovsky <leonro@mellanox.com> Cc: Mauro Carvalho Chehab <mchehab@kernel.org> Cc: Mike Rapoport <rppt@linux.ibm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> |
||
|
|
a707cdd55f |
mm/gup: move try_get_compound_head() to top, fix minor issues
An upcoming patch uses try_get_compound_head() more widely, so move it to the top of gup.c. Also fix a tiny spelling error and a checkpatch.pl warning. Link: http://lkml.kernel.org/r/20200107224558.2362728-3-jhubbard@nvidia.com Signed-off-by: John Hubbard <jhubbard@nvidia.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Jan Kara <jack@suse.cz> Reviewed-by: Ira Weiny <ira.weiny@intel.com> Cc: Alex Williamson <alex.williamson@redhat.com> Cc: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com> Cc: Björn Töpel <bjorn.topel@intel.com> Cc: Daniel Vetter <daniel.vetter@ffwll.ch> Cc: Dan Williams <dan.j.williams@intel.com> Cc: Hans Verkuil <hverkuil-cisco@xs4all.nl> Cc: Jason Gunthorpe <jgg@mellanox.com> Cc: Jason Gunthorpe <jgg@ziepe.ca> Cc: Jens Axboe <axboe@kernel.dk> Cc: Jerome Glisse <jglisse@redhat.com> Cc: Jonathan Corbet <corbet@lwn.net> Cc: Kirill A. Shutemov <kirill@shutemov.name> Cc: Leon Romanovsky <leonro@mellanox.com> Cc: Mauro Carvalho Chehab <mchehab@kernel.org> Cc: Mike Rapoport <rppt@linux.ibm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> |
||
|
|
a43e982082 |
mm/gup: factor out duplicate code from four routines
Patch series "mm/gup: prereqs to track dma-pinned pages: FOLL_PIN", v12.
Overview:
This is a prerequisite to solving the problem of proper interactions
between file-backed pages, and [R]DMA activities, as discussed in [1],
[2], [3], and in a remarkable number of email threads since about
2017. :)
A new internal gup flag, FOLL_PIN is introduced, and thoroughly
documented in the last patch's Documentation/vm/pin_user_pages.rst.
I believe that this will provide a good starting point for doing the
layout lease work that Ira Weiny has been working on. That's because
these new wrapper functions provide a clean, constrained, systematically
named set of functionality that, again, is required in order to even
know if a page is "dma-pinned".
In contrast to earlier approaches, the page tracking can be
incrementally applied to the kernel call sites that, until now, have
been simply calling get_user_pages() ("gup"). In other words, opt-in by
changing from this:
get_user_pages() (sets FOLL_GET)
put_page()
to this:
pin_user_pages() (sets FOLL_PIN)
unpin_user_page()
Testing:
* I've done some overall kernel testing (LTP, and a few other goodies),
and some directed testing to exercise some of the changes. And as you
can see, gup_benchmark is enhanced to exercise this. Basically, I've
been able to runtime test the core get_user_pages() and
pin_user_pages() and related routines, but not so much on several of
the call sites--but those are generally just a couple of lines
changed, each.
Not much of the kernel is actually using this, which on one hand
reduces risk quite a lot. But on the other hand, testing coverage
is low. So I'd love it if, in particular, the Infiniband and PowerPC
folks could do a smoke test of this series for me.
Runtime testing for the call sites so far is pretty light:
* io_uring: Some directed tests from liburing exercise this, and
they pass.
* process_vm_access.c: A small directed test passes.
* gup_benchmark: the enhanced version hits the new gup.c code, and
passes.
* infiniband: Ran rdma-core tests: rdma-core/build/bin/run_tests.py
* VFIO: compiles (I'm vowing to set up a run time test soon, but it's
not ready just yet)
* powerpc: it compiles...
* drm/via: compiles...
* goldfish: compiles...
* net/xdp: compiles...
* media/v4l2: compiles...
[1] Some slow progress on get_user_pages() (Apr 2, 2019): https://lwn.net/Articles/784574/
[2] DMA and get_user_pages() (LPC: Dec 12, 2018): https://lwn.net/Articles/774411/
[3] The trouble with get_user_pages() (Apr 30, 2018): https://lwn.net/Articles/753027/
This patch (of 22):
There are four locations in gup.c that have a fair amount of code
duplication. This means that changing one requires making the same
changes in four places, not to mention reading the same code four times,
and wondering if there are subtle differences.
Factor out the common code into static functions, thus reducing the
overall line count and the code's complexity.
Also, take the opportunity to slightly improve the efficiency of the
error cases, by doing a mass subtraction of the refcount, surrounded by
get_page()/put_page().
Also, further simplify (slightly), by waiting until the the successful
end of each routine, to increment *nr.
Link: http://lkml.kernel.org/r/20200107224558.2362728-2-jhubbard@nvidia.com
Signed-off-by: John Hubbard <jhubbard@nvidia.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Jérôme Glisse <jglisse@redhat.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Cc: Kirill A. Shutemov <kirill@shutemov.name>
Cc: Ira Weiny <ira.weiny@intel.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com>
Cc: Alex Williamson <alex.williamson@redhat.com>
Cc: Björn Töpel <bjorn.topel@intel.com>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: Dan Williams <dan.j.williams@intel.com>
Cc: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Cc: Jason Gunthorpe <jgg@mellanox.com>
Cc: Jason Gunthorpe <jgg@ziepe.ca>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Leon Romanovsky <leonro@mellanox.com>
Cc: Mauro Carvalho Chehab <mchehab@kernel.org>
Cc: Mike Rapoport <rppt@linux.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
||
|
|
be9d304589 |
mm/gup.c: use is_vm_hugetlb_page() to check whether to follow huge
No functional change, just leverage the helper function to improve readability as others. Link: http://lkml.kernel.org/r/20200113070322.26627-1-richardw.yang@linux.intel.com Signed-off-by: Wei Yang <richardw.yang@linux.intel.com> Acked-by: Vlastimil Babka <vbabka@suse.cz> Acked-by: David Rientjes <rientjes@google.com> Reviewed-by: Ralph Campbell <rcampbell@nvidia.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> |
||
|
|
15494520b7 |
mm: fix gup_pud_range
sorry for not processing for a long time. I met it again. patch v1 https://lkml.org/lkml/2019/9/20/656 do_machine_check() do_memory_failure() memory_failure() hw_poison_user_mappings() try_to_unmap() pteval = swp_entry_to_pte(make_hwpoison_entry(subpage)); ...and now we have a swap entry that indicates that the page entry refers to a bad (and poisoned) page of memory, but gup_fast() at this level of the page table was ignoring swap entries, and incorrectly assuming that "!pxd_none() == valid and present". And this was not just a poisoned page problem, but a generaly swap entry problem. So, any swap entry type (device memory migration, numa migration, or just regular swapping) could lead to the same problem. Fix this by checking for pxd_present(), instead of pxd_none(). Link: http://lkml.kernel.org/r/1578479084-15508-1-git-send-email-hqjagain@gmail.com Signed-off-by: Qiujun Huang <hqjagain@gmail.com> Cc: John Hubbard <jhubbard@nvidia.com> Cc: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com> Cc: Naoya Horiguchi <n-horiguchi@ah.jp.nec.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> |
||
|
|
ddf8f376d1 |
mm/filemap.c: clean up filemap_write_and_wait()
At some point filemap_write_and_wait() and filemap_write_and_wait_range() got the exact same implementation with the exception of the range being specified in *_range() Similar to other functions in fs.h which call *_range(..., 0, LLONG_MAX), change filemap_write_and_wait() to be a static inline which calls filemap_write_and_wait_range() Link: http://lkml.kernel.org/r/20191129160713.30892-1-ira.weiny@intel.com Signed-off-by: Ira Weiny <ira.weiny@intel.com> Reviewed-by: Nikolay Borisov <nborisov@suse.com> Reviewed-by: Matthew Wilcox (Oracle) <willy@infradead.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> |
||
|
|
5b57b8f227 |
mm/debug.c: always print flags in dump_page()
Commit |
||
|
|
8c96f1bc6f |
mm/kmemleak: turn kmemleak_lock and object->lock to raw_spinlock_t
kmemleak_lock as a rwlock on RT can possibly be acquired in atomic context which does work. Since the kmemleak operation is performed in atomic context make it a raw_spinlock_t so it can also be acquired on RT. This is used for debugging and is not enabled by default in a production like environment (where performance/latency matters) so it makes sense to make it a raw_spinlock_t instead trying to get rid of the atomic context. Turn also the kmemleak_object->lock into raw_spinlock_t which is acquired (nested) while the kmemleak_lock is held. The time spent in "echo scan > kmemleak" slightly improved on 64core box with this patch applied after boot. [bigeasy@linutronix.de: redo the description, update comments. Merge the individual bits: He Zhe did the kmemleak_lock, Liu Haitao the ->lock and Yongxin Liu forwarded Liu's patch.] Link: http://lkml.kernel.org/r/20191219170834.4tah3prf2gdothz4@linutronix.de Link: https://lkml.kernel.org/r/20181218150744.GB20197@arrakis.emea.arm.com Link: https://lkml.kernel.org/r/1542877459-144382-1-git-send-email-zhe.he@windriver.com Link: https://lkml.kernel.org/r/20190927082230.34152-1-yongxin.liu@windriver.com Signed-off-by: He Zhe <zhe.he@windriver.com> Signed-off-by: Liu Haitao <haitao.liu@windriver.com> Signed-off-by: Yongxin Liu <yongxin.liu@windriver.com> Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Acked-by: Catalin Marinas <catalin.marinas@arm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> |
||
|
|
90e9f6a66c |
mm/slub.c: avoid slub allocation while holding list_lock
If we are already under list_lock, don't call kmalloc(). Otherwise we
will run into a deadlock because kmalloc() also tries to grab the same
lock.
Fix the problem by using a static bitmap instead.
WARNING: possible recursive locking detected
--------------------------------------------
mount-encrypted/4921 is trying to acquire lock:
(&(&n->list_lock)->rlock){-.-.}, at: ___slab_alloc+0x104/0x437
but task is already holding lock:
(&(&n->list_lock)->rlock){-.-.}, at: __kmem_cache_shutdown+0x81/0x3cb
other info that might help us debug this:
Possible unsafe locking scenario:
CPU0
----
lock(&(&n->list_lock)->rlock);
lock(&(&n->list_lock)->rlock);
*** DEADLOCK ***
Link: http://lkml.kernel.org/r/20191108193958.205102-2-yuzhao@google.com
Signed-off-by: Yu Zhao <yuzhao@google.com>
Acked-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Cc: Christoph Lameter <cl@linux.com>
Cc: Pekka Enberg <penberg@kernel.org>
Cc: David Rientjes <rientjes@google.com>
Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Cc: Tetsuo Handa <penguin-kernel@i-love.sakura.ne.jp>
Cc: Yu Zhao <yuzhao@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
||
|
|
25b69918d9 |
ocfs2: use ocfs2_update_inode_fsync_trans() to access t_tid in handle->h_transaction
For the uniform format, we use ocfs2_update_inode_fsync_trans() to access t_tid in handle->h_transaction Link: http://lkml.kernel.org/r/6ff9a312-5f7d-0e27-fb51-bc4e062fcd97@huawei.com Signed-off-by: Yan Wang <wangyan122@huawei.com> Reviewed-by: Jun Piao <piaojun@huawei.com> Cc: Mark Fasheh <mark@fasheh.com> Cc: Joel Becker <jlbec@evilplan.org> Cc: Junxiao Bi <junxiao.bi@oracle.com> Cc: Joseph Qi <jiangqi903@gmail.com> Cc: Changwei Ge <gechangwei@live.cn> Cc: Gang He <ghe@suse.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> |
||
|
|
9f16ca48fc |
ocfs2: fix a NULL pointer dereference when call ocfs2_update_inode_fsync_trans()
I found a NULL pointer dereference in ocfs2_update_inode_fsync_trans(),
handle->h_transaction may be NULL in this situation:
ocfs2_file_write_iter
->__generic_file_write_iter
->generic_perform_write
->ocfs2_write_begin
->ocfs2_write_begin_nolock
->ocfs2_write_cluster_by_desc
->ocfs2_write_cluster
->ocfs2_mark_extent_written
->ocfs2_change_extent_flag
->ocfs2_split_extent
->ocfs2_try_to_merge_extent
->ocfs2_extend_rotate_transaction
->ocfs2_extend_trans
->jbd2_journal_restart
->jbd2__journal_restart
// handle->h_transaction is NULL here
->handle->h_transaction = NULL;
->start_this_handle
/* journal aborted due to storage
network disconnection, return error */
->return -EROFS;
/* line 3806 in ocfs2_try_to_merge_extent (),
it will ignore ret error. */
->ret = 0;
->...
->ocfs2_write_end
->ocfs2_write_end_nolock
->ocfs2_update_inode_fsync_trans
// NULL pointer dereference
->oi->i_sync_tid = handle->h_transaction->t_tid;
The information of NULL pointer dereference as follows:
JBD2: Detected IO errors while flushing file data on dm-11-45
Aborting journal on device dm-11-45.
JBD2: Error -5 detected when updating journal superblock for dm-11-45.
(dd,22081,3):ocfs2_extend_trans:474 ERROR: status = -30
(dd,22081,3):ocfs2_try_to_merge_extent:3877 ERROR: status = -30
Unable to handle kernel NULL pointer dereference at
virtual address 0000000000000008
Mem abort info:
ESR = 0x96000004
Exception class = DABT (current EL), IL = 32 bits
SET = 0, FnV = 0
EA = 0, S1PTW = 0
Data abort info:
ISV = 0, ISS = 0x00000004
CM = 0, WnR = 0
user pgtable: 4k pages, 48-bit VAs, pgdp = 00000000e74e1338
[0000000000000008] pgd=0000000000000000
Internal error: Oops: 96000004 [#1] SMP
Process dd (pid: 22081, stack limit = 0x00000000584f35a9)
CPU: 3 PID: 22081 Comm: dd Kdump: loaded
Hardware name: Huawei TaiShan 2280 V2/BC82AMDD, BIOS 0.98 08/25/2019
pstate: 60400009 (nZCv daif +PAN -UAO)
pc : ocfs2_write_end_nolock+0x2b8/0x550 [ocfs2]
lr : ocfs2_write_end_nolock+0x2a0/0x550 [ocfs2]
sp : ffff0000459fba70
x29: ffff0000459fba70 x28: 0000000000000000
x27: ffff807ccf7f1000 x26: 0000000000000001
x25: ffff807bdff57970 x24: ffff807caf1d4000
x23: ffff807cc79e9000 x22: 0000000000001000
x21: 000000006c6cd000 x20: ffff0000091d9000
x19: ffff807ccb239db0 x18: ffffffffffffffff
x17: 000000000000000e x16: 0000000000000007
x15: ffff807c5e15bd78 x14: 0000000000000000
x13: 0000000000000000 x12: 0000000000000000
x11: 0000000000000000 x10: 0000000000000001
x9 : 0000000000000228 x8 : 000000000000000c
x7 : 0000000000000fff x6 : ffff807a308ed6b0
x5 : ffff7e01f10967c0 x4 : 0000000000000018
x3 : d0bc661572445600 x2 : 0000000000000000
x1 : 000000001b2e0200 x0 : 0000000000000000
Call trace:
ocfs2_write_end_nolock+0x2b8/0x550 [ocfs2]
ocfs2_write_end+0x4c/0x80 [ocfs2]
generic_perform_write+0x108/0x1a8
__generic_file_write_iter+0x158/0x1c8
ocfs2_file_write_iter+0x668/0x950 [ocfs2]
__vfs_write+0x11c/0x190
vfs_write+0xac/0x1c0
ksys_write+0x6c/0xd8
__arm64_sys_write+0x24/0x30
el0_svc_common+0x78/0x130
el0_svc_handler+0x38/0x78
el0_svc+0x8/0xc
To prevent NULL pointer dereference in this situation, we use
is_handle_aborted() before using handle->h_transaction->t_tid.
Link: http://lkml.kernel.org/r/03e750ab-9ade-83aa-b000-b9e81e34e539@huawei.com
Signed-off-by: Yan Wang <wangyan122@huawei.com>
Reviewed-by: Jun Piao <piaojun@huawei.com>
Cc: Mark Fasheh <mark@fasheh.com>
Cc: Joel Becker <jlbec@evilplan.org>
Cc: Junxiao Bi <junxiao.bi@oracle.com>
Cc: Joseph Qi <jiangqi903@gmail.com>
Cc: Changwei Ge <gechangwei@live.cn>
Cc: Gang He <ghe@suse.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
||
|
|
dd3e7cba16 |
ocfs2/dlm: move BITS_TO_BYTES() to bitops.h for wider use
There are users already and will be more of BITS_TO_BYTES() macro. Move it to bitops.h for wider use. In the case of ocfs2 the replacement is identical. As for bnx2x, there are two places where floor version is used. In the first case to calculate the amount of structures that can fit one memory page. In this case obviously the ceiling variant is correct and original code might have a potential bug, if amount of bits % 8 is not 0. In the second case the macro is used to calculate bytes transmitted in one microsecond. This will work for all speeds which is multiply of 1Gbps without any change, for the rest new code will give ceiling value, for instance 100Mbps will give 13 bytes, while old code gives 12 bytes and the arithmetically correct one is 12.5 bytes. Further the value is used to setup timer threshold which in any case has its own margins due to certain resolution. I don't see here an issue with slightly shifting thresholds for low speed connections, the card is supposed to utilize highest available rate, which is usually 10Gbps. Link: http://lkml.kernel.org/r/20200108121316.22411-1-andriy.shevchenko@linux.intel.com Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Reviewed-by: Joseph Qi <joseph.qi@linux.alibaba.com> Acked-by: Sudarsana Reddy Kalluru <skalluru@marvell.com> Cc: Mark Fasheh <mark@fasheh.com> Cc: Joel Becker <jlbec@evilplan.org> Cc: Junxiao Bi <junxiao.bi@oracle.com> Cc: Changwei Ge <gechangwei@live.cn> Cc: Gang He <ghe@suse.com> Cc: Jun Piao <piaojun@huawei.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> |
||
|
|
d8f1875069 |
ocfs2/dlm: remove redundant assignment to ret
The variable ret is being initialized with a value that is never read
and it is being updated later with a new value. The initialization is
redundant and can be removed.
Addresses Coverity ("Unused value")
Link: http://lkml.kernel.org/r/20191202164833.62865-1-colin.king@canonical.com
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Reviewed-by: Joseph Qi <joseph.qi@linux.alibaba.com>
Cc: Mark Fasheh <mark@fasheh.com>
Cc: Joel Becker <jlbec@evilplan.org>
Cc: Junxiao Bi <junxiao.bi@oracle.com>
Cc: Changwei Ge <gechangwei@live.cn>
Cc: Gang He <ghe@suse.com>
Cc: Jun Piao <piaojun@huawei.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
||
|
|
ca322fb603 |
ocfs2: make local header paths relative to C files
Gang He reports the failure of building fs/ocfs2/ as an external module of the kernel installed on the system: $ cd fs/ocfs2 $ make -C /lib/modules/`uname -r`/build M=`pwd` modules If you want to make it work reliably, I'd recommend to remove ccflags-y from the Makefiles, and to make header paths relative to the C files. I think this is the correct usage of the #include "..." directive. Link: http://lkml.kernel.org/r/20191227022950.14804-1-ghe@suse.com Signed-off-by: Masahiro Yamada <masahiroy@kernel.org> Signed-off-by: Gang He <ghe@suse.com> Reported-by: Gang He <ghe@suse.com> Reviewed-by: Gang He <ghe@suse.com> Cc: Mark Fasheh <mark@fasheh.com> Cc: Joel Becker <jlbec@evilplan.org> Cc: Junxiao Bi <junxiao.bi@oracle.com> Cc: Joseph Qi <jiangqi903@gmail.com> Cc: Changwei Ge <gechangwei@live.cn> Cc: Jun Piao <piaojun@huawei.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> |
||
|
|
5b43d6453a |
ocfs2: remove unneeded semicolons
Fixes coccicheck warnings: fs/ocfs2/cluster/quorum.c:76:2-3: Unneeded semicolon fs/ocfs2/dlmglue.c:573:2-3: Unneeded semicolon Link: http://lkml.kernel.org/r/6ee3aa16-9078-30b1-df3f-22064950bd98@linux.alibaba.com Signed-off-by: zhengbin <zhengbin13@huawei.com> Reported-by: Hulk Robot <hulkci@huawei.com> Acked-by: Joseph Qi <joseph.qi@linux.alibaba.com> Cc: Mark Fasheh <mark@fasheh.com> Cc: Joel Becker <jlbec@evilplan.org> Cc: Junxiao Bi <junxiao.bi@oracle.com> Cc: Changwei Ge <gechangwei@live.cn> Cc: Gang He <ghe@suse.com> Cc: Jun Piao <piaojun@huawei.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> |
||
|
|
67e2d2eb54 |
fs: ocfs: remove unnecessary assertion in dlm_migrate_lockres
In the only caller of dlm_migrate_lockres() - dlm_empty_lockres(), target is checked for O2NM_MAX_NODES. Thus, the assertion in dlm_migrate_lockres() is unnecessary and can be removed. The patch eliminates such a check. Link: http://lkml.kernel.org/r/20191218194111.26041-1-pakki001@umn.edu Signed-off-by: Aditya Pakki <pakki001@umn.edu> Cc: Mark Fasheh <mark@fasheh.com> Cc: Joel Becker <jlbec@evilplan.org> Cc: Junxiao Bi <junxiao.bi@oracle.com> Cc: Joseph Qi <jiangqi903@gmail.com> Cc: Changwei Ge <gechangwei@live.cn> Cc: Gang He <ghe@suse.com> Cc: Jun Piao <piaojun@huawei.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> |
||
|
|
4efc61c798 |
scripts/spelling.txt: add "issus" typo
Add "issus" and correct it as "issues". Link: http://lkml.kernel.org/r/20200105221950.8384-1-luca@lucaceresoli.net Signed-off-by: Luca Ceresoli <luca@lucaceresoli.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> |
||
|
|
2ab1278fe4 |
scripts/spelling.txt: add more spellings to spelling.txt
Here are some of the common spelling mistakes and typos that I've found while fixing up spelling mistakes in the kernel. Most of them still exist in more than two source files. Link: http://lkml.kernel.org/r/20191229143626.51238-1-xndchn@gmail.com Signed-off-by: Xiong <xndchn@gmail.com> Cc: Colin Ian King <colin.king@canonical.com> Cc: Stephen Boyd <sboyd@kernel.org> Cc: Paul Walmsley <paul.walmsley@sifive.com> Cc: Chris Paterson <chris.paterson2@renesas.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> |
||
|
|
5984fabb6e |
mm: move_pages: report the number of non-attempted pages
Since commit |
||
|
|
fac0516b55 |
mm: thp: don't need care deferred split queue in memcg charge move path
If compound is true, this means it is a PMD mapped THP. Which implies
the page is not linked to any defer list. So the first code chunk will
not be executed.
Also with this reason, it would not be proper to add this page to a
defer list. So the second code chunk is not correct.
Based on this, we should remove the defer list related code.
[yang.shi@linux.alibaba.com: better patch title]
Link: http://lkml.kernel.org/r/20200117233836.3434-1-richardw.yang@linux.intel.com
Fixes:
|
||
|
|
f1037ec0cc |
mm/memory_hotplug: fix remove_memory() lockdep splat
The daxctl unit test for the dax_kmem driver currently triggers the
(false positive) lockdep splat below. It results from the fact that
remove_memory_block_devices() is invoked under the mem_hotplug_lock()
causing lockdep entanglements with cpu_hotplug_lock() and sysfs (kernfs
active state tracking). It is a false positive because the sysfs
attribute path triggering the memory remove is not the same attribute
path associated with memory-block device.
sysfs_break_active_protection() is not applicable since there is no real
deadlock conflict, instead move memory-block device removal outside the
lock. The mem_hotplug_lock() is not needed to synchronize the
memory-block device removal vs the page online state, that is already
handled by lock_device_hotplug(). Specifically, lock_device_hotplug()
is sufficient to allow try_remove_memory() to check the offline state of
the memblocks and be assured that any in progress online attempts are
flushed / blocked by kernfs_drain() / attribute removal.
The add_memory() path safely creates memblock devices under the
mem_hotplug_lock(). There is no kernfs active state synchronization in
the memblock device_register() path, so nothing to fix there.
This change is only possible thanks to the recent change that refactored
memory block device removal out of arch_remove_memory() (commit
|