ams_enable_channel_sequence constructs a "scan_mask" for all the PS and
PL channels. This works out fine, since scan_index for these channels is
less than 64. However, it also includes the ams_ctrl_channels, where
scan_index is greater than 64, triggering undefined behavior. Since we
don't need these channels anyway, just exclude them.
Fixes: d5c70627a7 ("iio: adc: Add Xilinx AMS driver")
Signed-off-by: Sean Anderson <sean.anderson@linux.dev>
Link: https://lore.kernel.org/r/20240311162800.11074-1-sean.anderson@linux.dev
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Jonathan writes:
1st set of IIO fixes for the 6.10 cycle.
The usual mixed bag of old and new driver bugs plus one core issue that
highlighted we have some documentation issues that we need to fix
as a follow up action.
core in kernel interface
- Wrong return value documentation didn't help with an error in
a cleanup. Result is that thermal is failing to read the temperature.
adi,ad3552r
- Fix DT binding output range sign error.
adi,ad5592r
- Wrong scaling on temperature channel.
adi,ad7173
- Driver assumed all supported devices had input buffers. Make sure not to
enable them on the ad7176-2 which doesn't.
- Add some missing device names for recently added models.
- Drop an unneeded zero index on the single temperature channel.
- Clear buffered capture specific control bit when returning to on
demand sampling which otherwise no longer works.
- Make sampling frequency per channel rather than just setting it for the
first channel.
adi,ad9467
- Capital S for sign of channel whereas ABI is lowercase.
bosch,bmi323
- Make sure to release the trigger even on error paths in the trigger
handler as otherwise there is no path to recover.
bosch,bmp280
- Avoid an overflow in calculating the temperature.
invensense,timestamp helper
- Fix case where ODR is being switched to the existing ODR an update that
never finishes.
- Fix an issue with the timestamp being updated whilst still handling
previous interrupt (icm42600 and mpu6050)
invensense,icm42600
- Don't update the watermark parameters twice.
melexis,mlx90635
- Fix variable returned as error code.
* tag 'iio-fixes-for-6.10a' of https://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio:
iio: inkern: fix channel read regression
iio: imu: inv_mpu6050: stabilized timestamping in interrupt
iio: adc: ad7173: Fix sampling frequency setting
iio: adc: ad7173: Clear append status bit
iio: imu: inv_icm42600: delete unneeded update watermark call
iio: imu: inv_icm42600: stabilized timestamp in interrupt
iio: invensense: fix odr switching to same value
iio: adc: ad7173: Remove index from temp channel
iio: adc: ad7173: Add ad7173_device_info names
iio: adc: ad7173: fix buffers enablement for ad7176-2
iio: temperature: mlx90635: Fix ERR_PTR dereference in mlx90635_probe()
iio: imu: bmi323: Fix trigger notification in case of error
iio: dac: ad5592r: fix temperature channel scaling value
iio: pressure: bmp280: Fix BMP580 temperature reading
dt-bindings: iio: dac: fix ad354xr output range
iio: adc: ad9467: fix scan type sign
When auxiliary_device_add() returns error and then calls
auxiliary_device_uninit(), callback function
gp_auxiliary_device_release() calls ida_free() and
kfree(aux_device_wrapper) to free memory. We should't
call them again in the error handling path.
Fix this by skipping the redundant cleanup functions.
Fixes: 393fc2f594 ("misc: microchip: pci1xxxx: load auxiliary bus driver for the PIO function in the multi-function endpoint of pci1xxxx device.")
Signed-off-by: Yongzhi Liu <hyperlyzcs@gmail.com>
Link: https://lore.kernel.org/r/20240523121434.21855-3-hyperlyzcs@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
As described in the added code comment, a reference to .exit.text is ok
for drivers registered via module_platform_driver_probe(). Make this
explicit to prevent the following section mismatch warning
WARNING: modpost: drivers/parport/parport_amiga: section mismatch in reference: amiga_parallel_driver+0x8 (section: .data) -> amiga_parallel_remove (section: .exit.text)
that triggers on an allmodconfig W=1 build.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Link: https://lore.kernel.org/r/20240513075206.2337310-2-u.kleine-koenig@pengutronix.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
When using an initializer for a union only one of the union members
must be initialized. The initializer for the acpi_object union variable
passed as argument to the SID ACPI method was initializing both
the type and the integer members of the union.
Unfortunately rather then complaining about this gcc simply ignores
the first initializer and only used the second integer.value = 1
initializer. Leaving type set to 0 which leads to the argument being
skipped by acpi acpi_ns_evaluate() resulting in:
ACPI Warning: \_SB.PC00.SPI1.SPFD.CVFD.SID: Insufficient arguments -
Caller passed 0, method requires 1 (20240322/nsarguments-232)
Fix this by initializing only the integer struct part of the union
and initializing both members of the integer struct.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Fixes: 566f5ca976 ("mei: Add transport driver for IVSC device")
Reviewed-by: Wentong Wu <wentong.wu@intel.com>
Link: https://lore.kernel.org/r/20240603205050.505389-1-hdegoede@redhat.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The dynamically created mei client device (mei csi) is used as one V4L2
sub device of the whole video pipeline, and the V4L2 connection graph is
built by software node. The mei_stop() and mei_restart() will delete the
old mei csi client device and create a new mei client device, which will
cause the software node information saved in old mei csi device lost and
the whole video pipeline will be broken.
Removing mei_stop()/mei_restart() during system suspend/resume can fix
the issue above and won't impact hardware actual power saving logic.
Fixes: f6085a96c9 ("mei: vsc: Unregister interrupt handler for system suspend")
Cc: stable@vger.kernel.org # for 6.8+
Reported-by: Hao Yao <hao.yao@intel.com>
Signed-off-by: Wentong Wu <wentong.wu@intel.com>
Reviewed-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Tested-by: Jason Chen <jason.z.chen@intel.com>
Tested-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Acked-by: Tomas Winkler <tomas.winkler@intel.com>
Link: https://lore.kernel.org/r/20240527123835.522384-1-wentong.wu@intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Change level for the "not connected" client message in the write
callback from error to debug.
The MEI driver currently disconnects all clients upon system suspend.
This behavior is by design and user-space applications with
open connections before the suspend are expected to handle errors upon
resume, by reopening their handles, reconnecting,
and retrying their operations.
However, the current driver implementation logs an error message every
time a write operation is attempted on a disconnected client.
Since this is a normal and expected flow after system resume
logging this as an error can be misleading.
Signed-off-by: Alexander Usyskin <alexander.usyskin@intel.com>
Signed-off-by: Tomas Winkler <tomas.winkler@intel.com>
Link: https://lore.kernel.org/r/20240530091415.725247-1-tomas.winkler@intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Use IRQ ONESHOT flag to ensure the timestamp is not updated in the
hard handler during the thread handler. And use a fixed value of 1
sample that correspond to this first timestamp.
This way we can ensure the timestamp is always corresponding to the
value used by the timestamping mechanism. Otherwise, it is possible
that between FIFO count read and FIFO processing the timestamp is
overwritten in the hard handler.
Fixes: 111e1abd00 ("iio: imu: inv_mpu6050: use the common inv_sensors timestamp module")
Cc: stable@vger.kernel.org
Signed-off-by: Jean-Baptiste Maneyrol <jean-baptiste.maneyrol@tdk.com>
Link: https://lore.kernel.org/r/20240527150117.608792-1-inv.git-commit@tdk.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
This patch fixes two issues regarding the sampling frequency setting:
-The attribute was set as per device, not per channel. As such, when
setting the sampling frequency, the configuration was always done for
the slot 0, and the correct configuration was applied on the next
channel configuration call by the LRU mechanism.
-The LRU implementation does not take into account external settings of
the slot registers. When setting the sampling frequency directly to a
slot register in write_raw(), there is no guarantee that other channels
were not also using that slot and now incorrectly retain their config
as live.
Set the sampling frequency attribute as separate in the channel templates.
Do not set the sampling directly to the slot register in write_raw(),
just mark the config as not live and let the LRU mechanism handle it.
As the reg variable is no longer used, remove it.
Fixes: 76a1e6a428 ("iio: adc: ad7173: add AD7173 driver")
Signed-off-by: Dumitru Ceclan <dumitru.ceclan@analog.com>
Link: https://lore.kernel.org/r/20240530-ad7173-fixes-v3-5-b85f33079e18@analog.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Pull ata fixes from Niklas Cassel:
- Add a quirk for three different devices that have shown issues with
LPM (link power management). These devices appear to not implement
LPM properly, since we see command timeouts when enabling LPM. The
quirk disables LPM for these problematic devices. (Me)
- Do not apply the Intel PCS quirk on Alder Lake. The quirk is not
needed and was originally added by mistake when LPM support was
enabled for this AHCI controller. Enabling the quirk when not needed
causes the the controller to not be able to detect the connected
devices on some platforms.
* tag 'ata-6.10-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/libata/linux:
ata: libata-core: Add ATA_HORKAGE_NOLPM for Apacer AS340
ata: libata-core: Add ATA_HORKAGE_NOLPM for AMD Radeon S3 SSD
ata: libata-core: Add ATA_HORKAGE_NOLPM for Crucial CT240BX500SSD1
ata: ahci: Do not apply Intel PCS quirk on Intel Alder Lake
Pull x86 fixes from Ingo Molnar:
"Miscellaneous topology parsing fixes:
- Fix topology parsing regression on older CPUs in the new AMD/Hygon
parser
- Fix boot crash on odd Intel Quark and similar CPUs that do not fill
out cpuinfo_x86::x86_clflush_size and zero out
cpuinfo_x86::x86_cache_alignment as a result.
Provide 32 bytes as a general fallback value.
- Fix topology enumeration on certain rare CPUs where the BIOS locks
certain CPUID leaves and the kernel unlocked them late, which broke
with the new topology parsing code. Factor out this unlocking logic
and move it earlier in the parsing sequence"
* tag 'x86-urgent-2024-06-02' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/topology/intel: Unlock CPUID before evaluating anything
x86/cpu: Provide default cache line size if not enumerated
x86/topology/amd: Evaluate SMT in CPUID leaf 0x8000001e only on family 0x17 and greater
Pull scheduler fix from Ingo Molnar:
"Export a symbol to make life easier for instrumentation/debugging"
* tag 'sched-urgent-2024-06-02' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
sched/x86: Export 'percpu arch_freq_scale'
Pull hardening fixes from Kees Cook:
- scsi: mpt3sas: Avoid possible run-time warning with long manufacturer
strings
- mailmap: update entry for Kees Cook
- kunit/fortify: Remove __kmalloc_node() test
* tag 'hardening-v6.10-rc2-take2' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux:
kunit/fortify: Remove __kmalloc_node() test
mailmap: update entry for Kees Cook
scsi: mpt3sas: Avoid possible run-time warning with long manufacturer strings
Use IRQF_ONESHOT flag to ensure the timestamp is not updated in the
hard handler during the thread handler. And compute and use the
effective watermark value that correspond to this first timestamp.
This way we can ensure the timestamp is always corresponding to the
value used by the timestamping mechanism. Otherwise, it is possible
that between FIFO count read and FIFO processing the timestamp is
overwritten in the hard handler.
Fixes: ec74ae9fd3 ("iio: imu: inv_icm42600: add accurate timestamping")
Cc: stable@vger.kernel.org
Signed-off-by: Jean-Baptiste Maneyrol <jean-baptiste.maneyrol@tdk.com>
Link: https://lore.kernel.org/r/20240529154717.651863-1-inv.git-commit@tdk.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Pull powerpc fixes from Michael Ellerman:
- Enforce full ordering for ATOMIC operations with BPF_FETCH
- Fix uaccess build errors seen with GCC 13/14
- Fix build errors on ppc32 due to ARCH_HAS_KERNEL_FPU_SUPPORT
- Drop error message from lparcfg guest name lookup
Thanks to Christophe Leroy, Guenter Roeck, Nathan Lynch, Naveen N Rao,
Puranjay Mohan, and Samuel Holland.
* tag 'powerpc-6.10-2' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux:
powerpc: Limit ARCH_HAS_KERNEL_FPU_SUPPORT to PPC64
powerpc/uaccess: Use YZ asm constraint for ld
powerpc/uaccess: Fix build errors seen with GCC 13/14
powerpc/pseries/lparcfg: drop error message from guest name lookup
powerpc/bpf: enforce full ordering for ATOMIC operations with BPF_FETCH
Pull firewire fix from Takashi Sakamoto:
"After merging a commit 1fffe7a34c ("script: modpost: emit a warning
when the description is missing"), MODULE_DESCRIPTOR seems to be
mandatory for kernel modules. In FireWire subsystem, the most of
practical kernel modules have the field, while KUnit test modules do
not. A single patch is applied to fix them"
* tag 'firewire-fixes-6.10-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/ieee1394/linux1394:
firewire: add missing MODULE_DESCRIPTION() to test modules
Pull smb client fixes from Steve French:
"Two small smb3 fixes:
- Fix socket creation with sfu mount option (spotted by test generic/423)
- Minor cleanup: fix missing description in two files"
* tag '6.10-rc1-smb3-client-fixes' of git://git.samba.org/sfrench/cifs-2.6:
cifs: fix creating sockets when using sfu mount options
fs: smb: common: add missing MODULE_DESCRIPTION() macros
Pull Kbuild fixes from Masahiro Yamada:
- Fix a Kconfig bug regarding comparisons to 'm' or 'n'
- Replace missed $(srctree)/$(src)
- Fix unneeded kallsyms step 3
- Remove incorrect "compatible" properties from image nodes in
image.fit
- Improve gen_kheaders.sh
- Fix 'make dt_binding_check'
- Clean up unnecessary code
* tag 'kbuild-fixes-v6.10' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild:
dt-bindings: kbuild: Fix dt_binding_check on unconfigured build
kheaders: use `command -v` to test for existence of `cpio`
kheaders: explicitly define file modes for archived headers
scripts/make_fit: Drop fdt image entry compatible string
kbuild: remove a stale comment about cleaning in link-vmlinux.sh
kbuild: fix short log for AS in link-vmlinux.sh
kbuild: change scripts/mksysmap into sed script
kbuild: avoid unneeded kallsyms step 3
kbuild: scripts/gdb: Replace missed $(srctree)/$(src) w/ $(src)
kconfig: remove redundant check in expr_join_or()
kconfig: fix comparison to constant symbols, 'm', 'n'
kconfig: remove unused expr_is_no()
Pull xfs fixes from Chandan Babu:
- Fix a livelock by dropping an xfarray sortinfo folio when an error
is encountered
- During extended attribute operations, Initialize transaction
reservation computation based on attribute operation code
- Relax symbolic link's ondisk verification code to allow symbolic
links with short remote targets
- Prevent soft lockups when unmapping file ranges and also during
remapping blocks during a reflink operation
- Fix compilation warnings when XFS is built with W=1 option
* tag 'xfs-6.10-fixes-1' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux:
xfs: Add cond_resched to block unmap range and reflink remap path
xfs: don't open-code u64_to_user_ptr
xfs: allow symlinks with short remote targets
xfs: fix xfs_init_attr_trans not handling explicit operation codes
xfs: drop xfarray sortinfo folio on error
xfs: Stop using __maybe_unused in xfs_alloc.c
xfs: Clear W=1 warning in xfs_iwalk_run_callbacks()
Pull tty fix from Greg KH:
"Here is a single revert for a much-reported regression in 6.10-rc1
when it comes to a few older architectures.
Turns out that the VT ioctls don't work the same across all cpu types
because of some old compatibility requrements for stuff like alpha and
powerpc. So revert the change that attempted to have them use the
_IO() macros and go back to the known-working values instead.
This has NOT been in linux-next but has had many reports that it fixes
the issue with 6.10-rc1"
* tag 'tty-6.10-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty:
Revert "VT: Use macros to define ioctls"
Pull landlock fix from Mickaël Salaün:
"This fixes a wrong path walk triggered by syzkaller"
* tag 'landlock-6.10-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/mic/linux:
selftests/landlock: Add layout1.refer_mount_root
landlock: Fix d_parent walk
Pull drm fixes from Dave Airlie:
"This is the weekly fixes. Lots of small fixes across the board, one
BUG_ON fix in shmem seems most important, otherwise amdgpu, i915, xe
mostly with small fixes to all the other drivers.
shmem:
- fix BUG_ON in COW handling
- warn when trying to pin imported objects
buddy:
- fix page size handling
dma-buf:
- sw-sync: Don't interfere with IRQ handling
- fix kthreads-handling error path
i915:
- fix a race in audio component by registering it later
- make DPT object unshrinkable to avoid shrinking when framebuffer
has not shrunk
- fix CCS id calculation to fix a perf regression
- fix selftest caching mode
- fix FIELD_PREP compiler warnings
- fix indefinite wait for GT wakeref release
- revert overeager multi-gt pm reference removal
xe:
- pcode polling timeout change
- fix for deadlocks for faulting VMs
- error-path lock imbalance fix
amdgpu:
- RAS fix
- fix colorspace property for MST connectors
- fix for PCIe DPM
- silence UBSAN warning
- GPUVM robustness fix
- partition fix
- drop deprecated I2C_CLASS_SPD
amdkfd:
- revert unused changes for certain 11.0.3 devices
- simplify APU VRAM handling
lima:
- fix dma_resv-related deadlock in object pin
msm:
- remove build-time dependency on Python 3.9
nouveau:
- nvif: Fix possible integer overflow
panel:
- lg-sw43408: Select DP helpers; Declare backlight ops as static
- sitronix-st7789v: Various fixes for jt240mhqs_hwt_ek_e3 panel
panfrost:
- fix dma_resv-related deadlock in object pin"
* tag 'drm-fixes-2024-06-01' of https://gitlab.freedesktop.org/drm/kernel: (35 commits)
drm/msm: remove python 3.9 dependency for compiling msm
drm/panel: sitronix-st7789v: fix display size for jt240mhqs_hwt_ek_e3 panel
drm/panel: sitronix-st7789v: tweak timing for jt240mhqs_hwt_ek_e3 panel
drm/panel: sitronix-st7789v: fix timing for jt240mhqs_hwt_ek_e3 panel
drm/amd/pm: remove deprecated I2C_CLASS_SPD support from newly added SMU_14_0_2
drm/amdgpu: Make CPX mode auto default in NPS4
drm/amdkfd: simplify APU VRAM handling
Revert "drm/amdkfd: fix gfx_target_version for certain 11.0.3 devices"
drm/amdgpu: fix dereference null return value for the function amdgpu_vm_pt_parent
drm/amdgpu: silence UBSAN warning
drm/amdgpu: Adjust logic in amdgpu_device_partner_bandwidth()
drm/i915: Fix audio component initialization
drm/i915/dpt: Make DPT object unshrinkable
drm/i915/gt: Fix CCS id's calculation for CCS mode setting
drm/panel/lg-sw43408: mark sw43408_backlight_ops as static
drm/i915/selftests: Set always_coherent to false when reading from CPU
drm/panel/lg-sw43408: select CONFIG_DRM_DISPLAY_DP_HELPER
drm/i915/guc: avoid FIELD_PREP warning
drm/i915/gt: Disarm breadcrumbs if engines are already idle
Revert "drm/i915: Remove extra multi-gt pm-references"
...
Pull mailbox fix from Jassi Brar:
- zynqmp-ipi: fix linker error on some configurations
* tag 'mailbox-fixes-v6.10-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/jassibrar/mailbox:
mailbox: zynqmp-ipi: drop irq_to_desc() call
Pull spi fixes from Mark Brown:
"A series of fixes that came in since the merge window, the main thing
being the fixes Andy did for DMA sync where we were calling into the
DMA API in suprising ways and causing issues as a result, the main
thing being confusing the IOMMU code.
We've also got some fairly important fixes for the stm32 driver, it
supports a wide range of hardware and some optimisations that were
done recently have broken on some systems, and a fix to prevent
glitched signals on the bus in the cadence driver"
* tag 'spi-fix-v6.10-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi:
spi: stm32: Don't warn about spurious interrupts
spi: Assign dummy scatterlist to unidirectional transfers
spi: cadence: Ensure data lines set to low during dummy-cycle period
spi: stm32: Revert change that enabled controller before asserting CS
spi: Check if transfer is mapped before calling DMA sync APIs
spi: Don't mark message DMA mapped when no transfer in it is
Pull regulator fix from Mark Brown:
"One fix that came in since -rc1, fixing misuse of a local variable in
the DT parsing code in the RTQ2208 driver"
* tag 'regulator-fix-v6.10-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator:
regulator: rtq2208: Fix invalid memory access when devm_of_regulator_put_matches is called
Pull regmap fix from Mark Brown:
"The I2C bus was not taking account of the register and any padding
bytes when handling maximum write sizes supported by an I2C adaptor,
this patch from Jim Wylder fixes that"
* tag 'regmap-fix-v6.10-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regmap:
regmap-i2c: Subtract reg size from max_write
Pull block fixes from Jens Axboe:
- NVMe fixes via Keith:
- Removing unused fields (Kanchan)
- Large folio offsets support (Kundan)
- Multipath NUMA node initialiazation fix (Nilay)
- Multipath IO stats accounting fixes (Keith)
- Circular lockdep fix (Keith)
- Target race condition fix (Sagi)
- Target memory leak fix (Sagi)
- bcache fixes
- null_blk fixes (Damien)
- Fix regression in io.max due to throttle low removal (Waiman)
- DM limit table fixes (Christoph)
- SCSI and block limit fixes (Christoph)
- zone fixes (Damien)
- Misc fixes (Christoph, Hannes, hexue)
* tag 'block-6.10-20240530' of git://git.kernel.dk/linux: (25 commits)
blk-throttle: Fix incorrect display of io.max
block: Fix zone write plugging handling of devices with a runt zone
block: Fix validation of zoned device with a runt zone
null_blk: Do not allow runt zone with zone capacity smaller then zone size
nvmet: fix a possible leak when destroy a ctrl during qp establishment
nvme: use srcu for iterating namespace list
bcache: code cleanup in __bch_bucket_alloc_set()
bcache: call force_wake_up_gc() if necessary in check_should_bypass()
bcache: allow allocator to invalidate bucket in gc
block: check for max_hw_sectors underflow
block: stack max_user_sectors
sd: also set max_user_sectors when setting max_sectors
null_blk: Print correct max open zones limit in null_init_zoned_dev()
block: delete redundant function declaration
null_blk: Fix return value of nullb_device_power_store()
dm: make dm_set_zones_restrictions work on the queue limits
dm: remove dm_check_zoned
dm: move setting zoned_enabled to dm_table_set_restrictions
block: remove blk_queue_max_integrity_segments
nvme: adjust multiples of NVME_CTRL_PAGE_SIZE in offset
...
Pull io_uring fixes from Jens Axboe:
"A couple of minor fixes for issues introduced in the 6.10 merge window:
- Ensure that all read/write ops have an appropriate cleanup handler
set (Breno)
- Regression for applications still doing multiple mmaps even if
FEAT_SINGLE_MMAP is set (me)
- Move kmsg inquiry setting above any potential failure point,
avoiding a spurious NONEMPTY flag setting on early error (me)"
* tag 'io_uring-6.10-20240530' of git://git.kernel.dk/linux:
io_uring/net: assign kmsg inq/flags before buffer selection
io_uring/rw: Free iovec before cleaning async data
io_uring: don't attempt to mmap larger than what the user asks for
Pull dma-mapping fixes from Christoph Hellwig:
- dma-mapping benchmark error handling fixes (Fedor Pchelkin)
- correct a config symbol reference in the DMA API documentation (Lukas
Bulwahn)
* tag 'dma-mapping-6.10-2024-05-31' of git://git.infradead.org/users/hch/dma-mapping:
Documentation/core-api: correct reference to SWIOTLB_DYNAMIC
dma-mapping: benchmark: handle NUMA_NO_NODE correctly
dma-mapping: benchmark: fix node id validation
dma-mapping: benchmark: avoid needless copy_to_user if benchmark fails
dma-mapping: benchmark: fix up kthread-related error handling
Pull sound fixes from Takashi Iwai:
"Lots of small fixes:
- A race fix for debugfs handling in ALSA core
- A series of corrections for MIDI2 core format conversions
- ASoC Intel fixes for 16 bit DMIC config
- Updates for missing module parameters in ASoC code
- HD-audio quirk, Cirrus codec fix, etc minor fixes"
* tag 'sound-6.10-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: (26 commits)
ALSA: seq: ump: Fix swapped song position pointer data
ASoC: SOF: ipc4-topology: Adjust the params based on DAI formats
ASoC: SOF: ipc4-topology: Improve readability of sof_ipc4_prepare_dai_copier()
ASoC: SOF: ipc4-topology/pcm: Rename sof_ipc4_copier_is_single_format()
ASoC: SOF: ipc4-topology: Print out the channel count in sof_ipc4_dbg_audio_format
ASoC: SOF: ipc4-topology: Add support for NHLT with 16-bit only DMIC blob
ALSA: seq: Fix yet another spot for system message conversion
ALSA: ump: Set default protocol when not given explicitly
ALSA: ump: Don't accept an invalid UMP protocol number
ASoC: SOF: ipc4-topology: Fix input format query of process modules without base extension
ASoC: Intel: sof-sdw: fix missing SPI_MASTER dependency
ALSA: pcm: fix typo in comment
ALSA: ump: Don't clear bank selection after sending a program change
ALSA: seq: Fix incorrect UMP type for system messages
ALSA/hda: intel-dsp-config: reduce log verbosity
ALSA: seq: Don't clear bank selection at event -> UMP MIDI2 conversion
ALSA: seq: Fix missing bank setup between MIDI1/MIDI2 UMP conversion
ASoC: SOF: add missing MODULE_DESCRIPTION()
ASoC: SOF: reorder MODULE_ definitions
ASoC: SOF: AMD: group all module related information
...
Pull x86 platform driver fixes from Hans de Goede:
- a use-after-free bugfix
- Kconfig fixes for randconfig builds
- allow setting touchscreen_dmi quirks from the cmdline for debugging
- touchscreen_dmi quirks for two new laptop/tablet models
* tag 'platform-drivers-x86-v6.10-2' of git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86:
platform/x86: touchscreen_dmi: Add info for the EZpad 6s Pro
platform/x86: touchscreen_dmi: Add info for GlobalSpace SolT IVW 11.6" tablet
platform/x86: touchscreen_dmi: Add support for setting touchscreen properties from cmdline
platform/x86: thinkpad_acpi: Select INPUT_SPARSEKMAP in Kconfig
platform/x86: x86-android-tablets: Add "select LEDS_CLASS"
platform/x86: ISST: fix use-after-free in tpmi_sst_dev_remove()
Pull RISC-V fixes from Palmer Dabbelt:
- A fix to avoid pt_regs aliasing with idle thread stacks on secondary
harts.
- HAVE_ARCH_HUGE_VMAP is enabled on XIP kernels, which fixes boot
issues on XIP systems with huge pages.
- An update to the uABI documentation clarifying that only scalar
misaligned accesses were grandfathered in as supported, as the vector
extension did not exist at the time the uABI was frozen.
- A fix for the recently-added byte/half atomics to avoid losing the
fully ordered decorations.
* tag 'riscv-for-linus-6.10-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux:
riscv: Fix fully ordered LR/SC xchg[8|16]() implementations
Documentation: RISC-V: uabi: Only scalar misaligned loads are supported
riscv: enable HAVE_ARCH_HUGE_VMAP for XIP kernel
riscv: prevent pt_regs corruption for secondary idle threads
Pull bcachefs fixes from Kent Overstreet:
"Assorted odds and ends...
- two downgrade fixes
- a couple snapshot deletion and repair fixes, thanks to noradtux for
finding these and providing the image to debug them
- a couple assert fixes
- convert to folio helper, from Matthew
- some improved error messages
- bit of code reorganization (just moving things around); doing this
while things are quiet so I'm not rebasing fixes past reorgs
- don't return -EROFS on inconsistency error in recovery, this
confuses util-linux and has it retry the mount
- fix failure to return error on misaligned dio write; reported as an
issue with coreutils shred"
* tag 'bcachefs-2024-05-30' of https://evilpiepirate.org/git/bcachefs: (21 commits)
bcachefs: Fix failure to return error on misaligned dio write
bcachefs: Don't return -EROFS from mount on inconsistency error
bcachefs: Fix uninitialized var warning
bcachefs: Split out sb-errors_format.h
bcachefs: Split out journal_seq_blacklist_format.h
bcachefs: Split out replicas_format.h
bcachefs: Split out disk_groups_format.h
bcachefs: split out sb-downgrade_format.h
bcachefs: split out sb-members_format.h
bcachefs: Better fsck error message for key version
bcachefs: btree_gc can now handle unknown btrees
bcachefs: add missing MODULE_DESCRIPTION()
bcachefs: Fix setting of downgrade recovery passes/errors
bcachefs: Run check_key_has_snapshot in snapshot_delete_keys()
bcachefs: Refactor delete_dead_snapshots()
bcachefs: Fix locking assert
bcachefs: Fix lookup_first_inode() when inode_generations are present
bcachefs: Plumb bkey into __btree_err()
bcachefs: Use copy_folio_from_iter_atomic()
bcachefs: Fix sb-downgrade validation
...
Intel CPUs have a MSR bit to limit CPUID enumeration to leaf two. If
this bit is set by the BIOS then CPUID evaluation including topology
enumeration does not work correctly as the evaluation code does not try
to analyze any leaf greater than two.
This went unnoticed before because the original topology code just
repeated evaluation several times and managed to overwrite the initial
limited information with the correct one later. The new evaluation code
does it once and therefore ends up with the limited and wrong
information.
Cure this by unlocking CPUID right before evaluating anything which
depends on the maximum CPUID leaf being greater than two instead of
rereading stuff after unlock.
Fixes: 22d63660c3 ("x86/cpu: Use common topology code for Intel")
Reported-by: Peter Schneider <pschneider1968@googlemail.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Tested-by: Peter Schneider <pschneider1968@googlemail.com>
Cc: <stable@kernel.org>
Link: https://lore.kernel.org/r/fd3f73dc-a86f-4bcf-9c60-43556a21eb42@googlemail.com
irq_to_desc() is not exported to loadable modules, so this driver now
fails to link in some configurations:
ERROR: modpost: "irq_to_desc" [drivers/mailbox/zynqmp-ipi-mailbox.ko] undefined!
I can't see a purpose for this call, since the return value is unused
and probably left over from some code refactoring.
Address the link failure by just removing the line.
Fixes: 6ffb163534 ("mailbox: zynqmp: handle SGI for shared IPI")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Tested-by: Tanmay Shah <tanmay.shah@amd.com>
Signed-off-by: Jassi Brar <jassisinghbrar@gmail.com>
Ke Sun
Alexander Sverdlin
Fernando Yang
Sean Anderson
Greg Kroah-Hartman
Yongzhi Liu
Uwe Kleine-König
Hans de Goede
Wentong Wu
Tomas Winkler
Alexander Usyskin
Johan Hovold
Jean-Baptiste Maneyrol
Dumitru Ceclan
Linus Torvalds
Kees Cook
Thomas Gleixner
Arnd Bergmann