Convert the explicit mutex_lock()/mutex_unlock() pair to guard(mutex)
to simplify the locking logic and automatically release the mutex on
all exit paths.
This changes the mutex release point from immediately before dev_warn()
to automatic cleanup at scope exit. However, the affected path only emits
a warning and immediately returns -EINVAL, without any further processing.
Signed-off-by: bui duc phuc <phucduc.bui@gmail.com>
Link: https://patch.msgid.link/20260610102021.83273-6-phucduc.bui@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Firmware will set dsp_ack to 1 when firmware sends response for the IPC
command issued by host. Similarly dsp_msg flag will be updated to 1.
During ACP D0 entry, the value read from the sof_dsp_ack_write scratch
flag can be uninitialized. A non-zero garbage value is treated as a
pending DSP IPC ack before SOF_FW_BOOT_COMPLETE, causing a spurious
"IPC reply before FW_BOOT_COMPLETE" log.
Fix the condition checks for ipc flags.
Fixes: 738a2b5e2c ("ASoC: SOF: amd: Add IPC support for ACP IP block")
Link: https://github.com/thesofproject/linux/pull/5642
Signed-off-by: Vijendar Mukunda <Vijendar.Mukunda@amd.com>
Tested-by: Umang Jain <uajain@igalia.com>
Link: https://patch.msgid.link/20260609160938.3717513-1-Vijendar.Mukunda@amd.com
Signed-off-by: Mark Brown <broonie@kernel.org>
In wm_adsp_control_remove() check that the priv pointer is not NULL
before attempting to cleanup what it points to.
When cs_dsp creates a control it calls wm_adsp_control_add_cb() so that
wm_adsp can create its own private control data. There are two cases
where private data is not created:
1. The control is a SYSTEM control, so an ALSA control is not created.
2. The codec driver has registered a control_add() callback that
hides the control, so wm_adsp_control_add() is not called.
When cs_dsp_remove destroys its control list it calls
wm_adsp_control_remove() for each control. But wm_adsp_control_remove()
was attempting to cleanup the private data pointed to by cs_ctl->priv
without checking the pointer for NULL.
Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Fixes: 0700bc2fb9 ("ASoC: wm_adsp: Separate generic cs_dsp_coeff_ctl handling")
Link: https://patch.msgid.link/20260604101244.1402862-1-rf@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The ASUS Vivobook 18 M1807GA (AMD ACP7.x, PCI 1022:15e2, subsystem
1043:3531) exposes a single Realtek RT721 SDCA codec on SoundWire link 1.
The BIOS reports the ACP audio config flag as 0 (SoundWire mode), so
snd_pci_ps claims the device, brings up the SoundWire managers and
enumerates the RT721 peripheral (sdw:0:1:025d:0721:01); the rt721-sdca
codec driver binds successfully.
No sound card is created, however: acp63_sdw_machine_select() walks
snd_soc_acpi_amd_acp70_sdw_machines[] and finds no entry whose declared
SoundWire peripherals are all present on the bus. The only existing RT721
entry, acp70_rt721_l1u0_tas2783x2_l1u8b, additionally requires two
TAS2783 amplifiers and deliberately exposes the RT721 as jack + DMIC
only. This M1807GA variant has no external amplifiers - the RT721's
internal AIF2 amplifier path drives the speakers - so that entry never
matches and no machine device is registered.
Add a standalone RT721 machine entry for link 1 exposing all three RT721
endpoints (jack/AIF1, speaker amplifier/AIF2, DMIC/AIF3), mirroring the
standalone RT722 configuration. Place it after the TAS2783 combo entry so
platforms that do have the external amplifiers continue to match the more
specific entry first.
ACPI _ADR of the codec: 0x000130025D072101
(link_id=1 version=3 mfg_id=0x025d Realtek part_id=0x0721 class=0x01).
Verified on the hardware: with the entry present the amd_sdw machine
binds, an "amd-soundwire" card is registered exposing the rt721-sdca
AIF1 (SimpleJack) and AIF2 (SmartAmp) PCM devices, and audio plays out
of the built-in speakers.
Link: https://bugzilla.kernel.org/show_bug.cgi?id=221282
Signed-off-by: Aleksander Pshenitsyn <brains.fatman@gmail.com>
Link: https://patch.msgid.link/20260531101159.14241-1-brains.fatman@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The MSI Raider A18 HX A9WJG has an internal digital microphone
connected through AMD ACP6x, but this machine does not expose the
AcpDmicConnected ACPI property, so acp_yc_mach does not bind.
Add a DMI quirk for this model.
This was tested on an MSI Raider A18 HX A9WJG with board MS-182L,
BIOS E182LAMS.31A, AMD ACP6x rev 0x62, and Realtek ALC274. After
applying the quirk, the internal microphone appears as an acp6x DMIC
capture device and records correctly.
Signed-off-by: David Glushkov <david.glushkov@sntiq.com>
Link: https://patch.msgid.link/20260531214512.170716-1-david.glushkov@sntiq.com
Signed-off-by: Mark Brown <broonie@kernel.org>
When configuring 32 slots TDM (channels == slots == 32), the xMR
(Mask Register) write used:
~0UL - ((1 << min(channels, slots)) - 1)
The literal "1" is a signed 32-bit int. Shifting it by 32 positions is
undefined behaviour which may set this register to 0xFFFFFFFF, masking
all 32 slots.
Use GENMASK_U32() macro instead. For 32 slots this produces a zero mask:
~GENMASK_U32(31, 0) = ~0xFFFFFFFF = 0x00000000
Behaviour for fewer than 32 slots is unchanged.
Fixes: 770f58d7d2 ("ASoC: fsl_sai: Support multiple data channel enable bits")
Cc: stable@vger.kernel.org
Signed-off-by: Chancel Liu <chancel.liu@nxp.com>
Reviewed-by: Shengjiu Wang <shengjiu.wang@gmail.com>
Link: https://patch.msgid.link/20260601083327.1535185-1-chancel.liu@oss.nxp.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The MSI Bravo 17 C7VF routes its internal digital microphone through
the ACP6x. The machine driver only enables the DMIC for boards present
in the DMI quirk table, so on this model the internal mic is never
detected and no capture device is created.
Add a quirk entry matching the board's DMI identifiers so the DMIC is
enabled and the internal microphone works.
Signed-off-by: João Miguel <jmiguel.ghp@gmail.com>
Link: https://patch.msgid.link/20260523213548.5219-1-jmiguel.ghp@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Lenovo Yoga Pro 7 15ASH11 with AMD RYZEN AI MAX+ 388 (Strix Halo, ACP
7.0) uses Realtek ALC287 series codec and no any DMIC connected by ACP.
All DMICs directly connet with ALC codec.
Without this quirk, Input Device of Gnome Sound settings shows Internal
Stereo Microphone and Digital Microphone by default. In fact, Digital
Microphone of ACP doesn't work due to no connecting with ALC287 codec,
the Internal Stereo Microphone as analog device based on snd_hda_intel
driver can work well.
Add a DMI quirk to override the flag to 0, consistent with the existing
entry for the HN7306EA.
Signed-off-by: Jackie Dong <xy-jackie@139.com>
Link: https://patch.msgid.link/20260527102005.58528-1-xy-jackie@139.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Pull media fixes from Mauro Carvalho Chehab:
- rc: igorplugusb: fix control request setup packet
- vsp1: revert a couple patches to fix regressions when setting DRM
pipelines
* tag 'media/v7.1-4' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media:
media: rc: igorplugusb: fix control request setup packet
Revert "media: renesas: vsp1: brx: Fix format propagation"
Revert "media: renesas: vsp1: Initialize format on all pads"
Pull x86 fixes from Ingo Molnar:
- Make the clearcpuid= boot parameter less prominent
and warn about its dangers & caveats (Borislav Petkov)
- Do not access the (new) PLATFORM_ID MSR when running
as a guest (Borislav Petkov)
- x86 ftrace: Relocate %rip-relative percpu refs in dynamic
trampolines, to fix crash when using such trampolines
(Alexis Lothoré)
- Fix x86-64 CFI build error (Peter Zijlstra)
- Revert FPU signal return magic number check optimization,
because it broke CRIU and gVisor in certain FPU configurations
(Andrei Vagin)
* tag 'x86-urgent-2026-05-31' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
Revert "x86/fpu: Refine and simplify the magic number check during signal return"
x86/kvm/vmx: Fix x86_64 CFI build
x86/ftrace: Relocate %rip-relative percpu refs in dynamic trampolines
x86/microcode: Do not access MSR_IA32_PLATFORM_ID when running as a guest
Documentation/arch/x86: Hide clearcpuid=
Pull SCSI fixes from James Bottomley:
"Two core changes, the only one of significance being the change to
kick queues in SDEV_CANCEL which had a small window for stuck
requests.
The major driver fixes are the one to the FC transport class to widen
the FPIN counter to counter a theoretical (and privileged) fabric
traffic injection attack and the other is an iscsi fix where a
malicious target could trick the kernel into an output buffer overrun.
Both the driver fixes were AI assisted"
* tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi:
scsi: target: iscsi: Validate CHAP_R length before base64 decode
scsi: target: iscsi: Bound iscsi_encode_text_output() appends to rsp_buf
scsi: target: iscsi: Fix CRC overread and double-free in iscsit_handle_text_cmd()
scsi: fcoe: Reject FIP descriptors with zero fip_dlen in CVL walker
scsi: scsi_transport_fc: Widen FPIN pname walker counter to u32
scsi: scsi_debug: Add missing newline in scsi_debug_device_reset()
scsi: megaraid_sas: Fix NULL pointer dereference on firmware duplicate completion
scsi: devinfo: Add BLIST_NO_RSOC for Promise VTrak E310f
scsi: core: Run queues for all non-SDEV_DEL devices from scsi_run_host_queues
Pull i2c fixes from Wolfram Sang:
- davinci: fix fallback bus frequency on missing clock-frequency
- virtio: mark device ready initially
* tag 'i2c-for-7.1-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux:
i2c: virtio: mark device ready before registering the adapter
i2c: davinci: fix division by zero on missing clock-frequency
Pull input fixes from Dmitry Torokhov:
- updates to Elan I2C touchpad driver to handle a new IC type and to
validate size of supplied firmware to prevent OOB access
- updates to Xpad controller driver to recognize ASUS ROG RAIKIRI II
and "Nova 2 Lite" from GameSir controllers as well as a fix to
prevent a potential OOB access when handling "Share" button
- an update to Synaptics touchpad driver to use RMI mode for touchpad
in Thinkpad E490
- updates to Atmel MXT driver adding checks to prevent potential OOB
accesses
- a fix to IMS PCU driver to free correct amount of memory when tearing
it down
- a fixup to the recent change to Atlas buttons driver
- a small cleanup in fm801-fp for PCI IDs table initialisation
* tag 'input-for-v7.1-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input:
Input: ims-pcu - fix usb_free_coherent() size in ims_pcu_buffers_free()
Input: synaptics - add LEN2058 to SMBus passlist for ThinkPad E490
Input: atlas - check ACPI_COMPANION() against NULL
Input: atmel_mxt_ts - check mem_size before calculating config memory size
Input: atmel_mxt_ts - fix boundary check in mxt_prepare_cfg_mem
Input: fm801-gp - simplify initialisation of pci_device_id array
Input: xpad - add "Nova 2 Lite" from GameSir
Input: xpad - add support for ASUS ROG RAIKIRI II
Input: elan_i2c - validate firmware size before use
Input: xpad - fix out-of-bounds access for Share button
Input: usbtouchscreen - clamp NEXIO data_len/x_len to URB buffer size
Input: elan_i2c - increase device reset wait timeout after update FW
Input: elan_i2c - add ic type 0x19
Pull smb client fixes from Steve French:
- fix uninitialized variable in smb2_writev_callback()
- detect short folioq copy in cifs_copy_folioq_to_iter()
* tag 'v7.1-rc6-smb3-client-fixes' of git://git.samba.org/sfrench/cifs-2.6:
smb: client: fix uninitialized variable in smb2_writev_callback
smb: client: detect short folioq copy in cifs_copy_folioq_to_iter()
Pull liveupdate fixes from Mike Rapoport:
"Two kexec handover regression fixes:
- fix order calculation for kho_unpreserve_pages() to make sure sure
that the order calculation in kho_unpreserve_pages() mathes the
order calculation in kho_preserve_pages().
- fix math in calculation of KHO_TREE_MAX_DEPTH to make it work with
16KB pages"
* tag 'liveupdate-fixes-2026-05-30' of git://git.kernel.org/pub/scm/linux/kernel/git/liveupdate/linux:
kho: fix order calculation for kho_unpreserve_pages()
kho: fix KHO_TREE_MAX_DEPTH for non-4KB page sizes
Pull memblock fix from Mike Rapoport:
"Fix regression from memblock_free_late() refactoring
After refactoring of memblock_free_late() and free_init_pages() it
became possible to call memblock_free() after memblock init data was
discarded.
Make sure memblock_free() does not touch memblock.reserved unless it
is called early enough or when ARCH_KEEP_MEMBLOCK is enabled"
* tag 'fixes-2026-05-30' of git://git.kernel.org/pub/scm/linux/kernel/git/rppt/memblock:
memblock: don't touch memblock arrays when memblock_free() is called late
Commit eac69475b0 ("media: rc: igorplugusb: heed coherency
rules") changed the control request storage from an embedded struct to
an allocated pointer so it can obey DMA coherency rules.
However, the driver still passes &ir->request to usb_fill_control_urb().
That points the URB setup packet at the pointer field itself rather than
at the allocated struct usb_ctrlrequest.
USB core then interprets pointer bytes as the setup packet. This can
produce an invalid bRequestType and trigger the control direction warning
reported by syzbot:
usb 2-1: BOGUS control dir, pipe 80003580 doesn't match bRequestType 0
Pass ir->request itself as the setup packet.
Fixes: eac69475b0 ("media: rc: igorplugusb: heed coherency rules")
Reported-by: syzbot+11f0e4f957c7c3bf3d51@syzkaller.appspotmail.com
Closes: https://syzkaller.appspot.com/bug?extid=11f0e4f957c7c3bf3d51
Tested-by: syzbot+11f0e4f957c7c3bf3d51@syzkaller.appspotmail.com
Cc: stable@vger.kernel.org
Assisted-by: Codex:GPT-5.5
Signed-off-by: Henri A <contact@henrialfonso.com>
Signed-off-by: Sean Young <sean@mess.org>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
Pull USB and Thunderbolt fixes from Greg KH:
"Here is a set of USB fixes and new device ids for 7.1-rc6. Nothing
major in here, just lots of tiny fixes for reported issues found by
users and some older patches found by some scanning tools. Included in
here are:
- typec fixes found by fuzzers that have decided to finally look at
that device interaction path (i.e. before a driver is bound to a
device)
- typec fixes for issues found by users
- thunderbolt driver fixes for reported problems
- cdns3 driver fixes
- dwc3 driver fixes
- new device quirks added
- usb serial driver fixes for broken devices
- other small driver fixes
All of these have been in linux-next for over a week with no reported
issues"
* tag 'usb-7.1-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (54 commits)
USB: serial: cypress_m8: validate interrupt packet headers
USB: serial: safe_serial: fix memory corruption with small endpoint
USB: serial: omninet: fix memory corruption with small endpoint
USB: serial: mxuport: fix memory corruption with small endpoint
USB: serial: cypress_m8: fix memory corruption with small endpoint
USB: cdc-acm: Fix bit overlap and move quirk definitions to header
usb: dwc2: Fix use after free in debug code
usb: chipidea: core: convert ci_role_switch to local variable
usb: gadget: f_fs: serialize DMABUF cancel against request completion
usb: gadget: f_fs: copy only received bytes on short ep0 read
usb: gadget: dummy_hcd: Reject hub port requests for non-existent ports
dt-bindings: usb: Fix EIC7700 USB reset's issue
usbip: vudc: Fix use after free bug in vudc_remove due to race condition
dt-bindings: usb: ti,omap4-musb: Drop duplicate 'usb-phy' property constraints
usb: storage: Add quirks for PNY Elite Portable SSD
USB: quirks: add NO_LPM for Lenovo ThinkPad USB-C Dock Gen2 hub controllers
usb: usbtmc: reject interrupt endpoints with small wMaxPacketSize
usb: usbtmc: check URB actual_length for interrupt-IN notifications
xhci: tegra: Fix ghost USB device on dual-role port unplug
usb: gadget: uvc: hold opts->lock across XU walks in uvc_function_bind
...
Pull tty/serial driver fixes from Greg KH:
"Here are some small serial driver fixes for 7.1-rc6. Included in here
are:
- mips serial driver fixes to resolve some long-standing issues with
how they interacted with the console. That's the "majority" of the
changes in this merge request
- sh-sci driver regression fix
- 8250 driver regression fixes
- other small serial driver fixes for reported problems.
All of these have been in linux-next for over a week with no reported
issues"
* tag 'tty-7.1-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty:
serial: dz: Enable modular build
serial: zs: Convert to use a platform device
serial: dz: Convert to use a platform device
serial: zs: Switch to using channel reset
serial: zs: Fix bootconsole handover lockup
serial: dz: Fix bootconsole handover lockup
serial: dz: Fix bootconsole message clobbering at chip reset
serial: 8250_dw: dispatch SysRq character in dw8250_handle_irq()
serial: 8250: dispatch SysRq character in serial8250_handle_irq()
serial: core: introduce guard(uart_port_lock_check_sysrq_irqsave)
tty: serial: samsung: Remove redundant port lock acquisition in rx helpers
serial: altera_jtaguart: handle uart_add_one_port() failures
serial: qcom_geni: fix kfifo underflow when flush precedes DMA completion IRQ
serial: fsl_lpuart: fix rx buffer and DMA map leaks in start_rx_dma
tty: add missing tty_driver include to tty_port.h
serial: qcom-geni: fix UART_RX_PAR_EN bit position
serial: sh-sci: fix memory region release in error path
tty: serial: pch_uart: add check for dma_alloc_coherent()
serial: zs: Fix swapped RI/DSR modem line transition counting
Pull char/misc/iio fixes from Greg KH:
"Here are some small char/misc/iio driver fixes for 7.1-rc6. Included
in here are:
- lots of small IIO driver fixes for reported problems.
- Android binder bugfixes for reported issues.
- small comedi test driver fixes
- counter driver fix
- parport driver fix (people still use this?)
- rpi driver fix
- uio driver fix
All of these have been in linux-next for over a week with no reported
problems"
* tag 'char-misc-7.1-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (41 commits)
Revert "gpib: cb7210: Fix region leak when request_irq fails"
misc: rp1: Send IACK on IRQ activate to fix kdump/kexec
gpib: cb7210: Fix region leak when request_irq fails
parport: Fix race between port and client registration
uio: uio_pci_generic_sva: fix double free of devm_kzalloc() memory
rust_binder: Avoid holding lock when dropping delivered_death
rust_binder: avoid calling pending_oneway_finished() on TF_UPDATE_TXN
comedi: comedi_test: fix check for valid scan_begin_src in waveform_ai_cmdtest()
comedi: comedi_test: Fix limiting of convert_arg in waveform_ai_cmdtest()
iio: adc: viperboard: Fix error handling in vprbrd_iio_read_raw
iio: gyro: itg3200: fix i2c read into the wrong stack location
iio: dac: ad5686: fix powerdown control on dual-channel devices
iio: dac: ad5686: acquire lock when doing powerdown control
iio: temperature: tsys01: fix broken PROM checksum validation
iio: dac: ad3530r: Fix AD3531/AD3531R powerdown mode strings
iio: buffer: hw-consumer: fix use-after-free in error path
iio: dac: ad5686: fix input raw value check
iio: dac: ad5686: fix ref bit initialization for single-channel parts
iio: ssp_sensors: cancel delayed work_refresh on remove
iio: adc: meson-saradc: fix calibration buffer leak on error
...
virtio_i2c_probe() synchronously probes child i2c drivers on the bus,
but peripherals may use the bus at probe for tasks like reading a chip
id. The vhost-user-i2c backend stalls at such probes unless DRIVER_OK
is already set before the virtqueue is first kicked.
Set DRIVER_OK explicitly before i2c_add_adapter(), as done for the
same reason in commit f5866db64f ("virtio_console: enable VQs
early") and commit 71e4b8bf04 ("virtio_rpmsg: set DRIVER_OK before
using device").
Signed-off-by: Alexis Bouzigues <BouziguesAlexis@JohnDeere.com>
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Pull smb server fixes from Steve French:
- security fix for FSCTL_SET_SPARSE
- fix leak in ksmbd_query_inode_status()
- fix OOB read in smb_check_perm_dacl()
* tag 'v7.1-rc6-ksmbd-server-fixes' of git://git.samba.org/ksmbd:
ksmbd: fix FSCTL permission bypass by adding a permission check for FSCTL_SET_SPARSE
ksmbd: release ksmbd_inode ref via ksmbd_inode_put on lookup paths
ksmbd: OOB read regression in smb_check_perm_dacl() ACE-walk loops
Pull drm fixes from Dave Airlie:
"Regular pull, doesn't seem too insane or AI owned, couple of UAF fixes
and another repair for an earlier fix, mostly amdgpu and i915 display
with xe/i915 accel, and misc core/driver fixes.
It might be a bit bigger than usual at this stage, but I'm not seeing
anything too scary here.
dumb-buffer:
- prevent overflows in dumb-buffer creation
dma-buf:
- fix UAF in dma_buf_fd() tracepoint
gem:
- fix for the fix for the fix for the change handle ioctl
i915:
- Fix potential UAF in TTM object purge
- Use polling when irqs are unavailable
- Fix HDR pre-CSC LUT programming loop
- Block DC states on vblank enable when Panel Replay supported
- Use DC_OFF wake reference to block DC6 on vblank enable
xe:
- Restore IDLEDLY regiter on engine reset
amdgpu:
- GEM_OP warning fix
- GEM_OP locking fix
- Userq fixes
- DCN 2.1 refclk fix
- SI fix
- HMM fixes
amdkfd:
- svm_range_set_attr locking fix
- CRIU restore fix
- KFD debugger fix
amdxdna:
- require IOMMU on AIE2
hyperv:
- improve protocol validation
ivpu:
- test write offset in debugfs
rocket:
- fix UAF in bo creation"
* tag 'drm-fixes-2026-05-30' of https://gitlab.freedesktop.org/drm/kernel: (33 commits)
drm/gem: fix race between change_handle and handle_delete
drm: prevent integer overflows in dumb buffer creation helpers
dma-buf: fix UAF in dma_buf_fd() tracepoint
drm/amdgpu: fix calling VM invalidation in amdgpu_hmm_invalidate_gfx
drm/amdgpu: fix amdgpu_hmm_range_get_pages
drm/amdgpu/userq: use array instead of list for userq_vas
drm/amdgpu/userq: move mqd_destroy to later stage to keep core obj valid
drm/amdkfd: fix a vulnerability of integer overflow in kfd debugger
drm/amdgpu/userq: remove amdgpu_userq_create/destroy_object wrapper
drm/amd/pm/si: Disregard vblank time when no displays are connected
drm/amdkfd: Check for pdd drm file first in CRIU restore path
drm/amdgpu: fix potential overflow in fs_info.debugfs_name
drm/amdgpu/userq: make sure queue is valid in the hang_detect_work
drm/amdgpu/userq: reserve root bo without interruption
drm/amdgpu/userq: add amdgpu_bo_unpin when amdgpu_ttm_alloc_gart fails
drm/amdgpu: simplify return value in amdgpu_userq_get_doorbell_index
drm/amdkfd: fix NULL pointer bug in svm_range_set_attr
drm/amd/display: Write REFCLK to 48MHz on DCN21
drm/amdgpu/userq: Fix the mutex_init cleanup for fence_drv_lock
drm/amdgpu/userq: Fix doorbell object cleanup of queue
...
Pull spi fixes from Mark Brown:
"One substantive fix here, fixing corruption of the maximum frequency
for spi-mem operations which caused users to remember what should have
been a temporarily modified maximum frequency as the standard going
forward, potentially causing instability when the modification raised
rather than lowered the frequency.
We also have a trivial patch which just documents the correct way to
describe the Qualcomm IPQ5210 SNAND controller in the DT, there are no
code changes"
* tag 'spi-fix-v7.1-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi:
spi: spi-mem: avoid mutating op template in spi_mem_supports_op()
spi: dt-bindings: spi-qpic-snand: Add ipq5210 compatible
Pull regmap fix from Mark Brown:
"Some other fixing in an API user turned up the fact that we weren't
correctly applying cache only mode to volatile registers in
regmap_update_bits(), causing us to try to access hardware that was
powered off or otherwise not in a state to accept I/O. This fix
returns an error instead, avoiding more serious consequences"
* tag 'regmap-fix-v7.1-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regmap:
regmap: reject volatile update_bits() in cache-only mode
Pull more networking fixes from Jakub Kicinski:
"Quick follow up, nothing super urgent here. Main reason I'm sending
this out is because the IPsec and Bluetooth PRs did not make it
yesterday. I don't want to have to send you all of this + whatever
comes next week, for rc7. The fixes under "Previous releases -
regressions" are for real user-reported regressions from v7.0.
Previous releases - regressions:
- Revert "ipv6: preserve insertion order for same-scope addresses"
- xfrm: move policy_bydst RCU sync, a fix which added a sync RCU on
netns exit got backported to stable and was causing serious
accumulation of dying netns's for real workloads
- pcs-mtk-lynxi: fix bpi-r3 serdes configuration
Previous releases - always broken:
- usual grab bag of race, locking and leak fixes for Bluetooth
- handful of page handling fixes for IPsec"
* tag 'net-7.1-rc6-2' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (36 commits)
wireguard: send: append trailer after expanding head
Revert "ipv6: preserve insertion order for same-scope addresses"
net: skbuff: fix pskb_carve leaking zcopy pages
ipv6: fix possible infinite loop in fib6_select_path()
ipv6: fix possible infinite loop in rt6_fill_node()
bpf: sockmap: fix tail fragment offset in bpf_msg_push_data
vsock/virtio: bind uarg before filling zerocopy skb
Revert "esp: fix page frag reference leak on skb_to_sgvec failure"
net: pcs: pcs-mtk-lynxi: fix bpi-r3 serdes configuration
sctp: fix race between sctp_wait_for_connect and peeloff
net: mana: Skip redundant detach on already-detached port
net: mana: Add NULL guards in teardown path to prevent panic on attach failure
Bluetooth: hci_sync: Reset device counters in hci_dev_close_sync()
Bluetooth: hci_sync: Set HCI_CMD_DRAIN_WORKQUEUE during device close
Bluetooth: hci_core: Rework hci_dev_do_reset() to use hci_sync functions
Bluetooth: ISO: serialize iso_sock_clear_timer with socket lock
Bluetooth: ISO: fix UAF in iso_recv_frame
Bluetooth: L2CAP: Fix possible crash on l2cap_ecred_conn_rsp
Bluetooth: l2cap: clear chan->ident on ECRED reconfiguration success
Bluetooth: hci_qca: Use 100 ms SSR delay for rampatch and NVM loading
...
Pull clang build fix from Nathan Chancellor:
"A small fix to disable -Wattribute-alias for clang in the few places
it is already disabled for GCC, now that tip of tree clang has
implemented -Wattribute-alias as GCC has"
* tag 'clang-fixes-7.1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/nathan/linux:
Disable -Wattribute-alias for clang-23 and newer
This reverts
dc8aa31a7a ("x86/fpu: Refine and simplify the magic number check during signal return").
The aforementioned commit broke applications that construct signal frames in
userspace (such as CRIU and gVisor) if the frame's xstate size is smaller than
the kernel's fpstate->user_size.
Furthermore, this introduces a critical issue for checkpoint/restore tools
like CRIU. If a process is checkpointed while inside a signal handler, its
stack contains a signal frame formatted according to the source host's xstate
capabilities.
If that process is later restored on a destination host with larger xstate
capabilities (e.g., a newer CPU with more features enabled, resulting in
a larger fpstate->user_size), the kernel will look for FP_XSTATE_MAGIC2 at the
destination host's larger user_size offset instead of the offset encoded in
the frame's fx_sw->xstate_size.
This causes the magic2 check to fail, forcing sigreturn to silently fall back
to "FX-only" mode. Upon return from the signal handler, the process's extended
state is reset to initial values instead of being restored, leading to silent
data corruption.
The aforementioned commit cited
d877550eaf ("x86/fpu: Stop relying on userspace for info to fault in xsave buffer")
as justification to stop relying on userspace for the magic number check.
However, these two changes are fundamentally different. The last one only
changed how much memory the kernel ensures is paged-in before running XRSTOR
to prevent an infinite loop. It did not change the signal frame format or how
the layout is validated.
Reverting this change restores the use of fx_sw->xstate_size for
locating magic2 and restores the necessary sanity checks, ensuring that
the signal frame remains self-describing and portable.
[ bp: Massage commit message. ]
Fixes: dc8aa31a7a ("x86/fpu: Refine and simplify the magic number check during signal return")
Signed-off-by: Andrei Vagin <avagin@google.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Acked-by: Chang S. Bae <chang.seok.bae@intel.com>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/all/20260429000623.3356606-1-avagin@google.com
drm_gem_change_handle_ioctl leaves the old handle live in the IDR
during the window between spin_unlock(table_lock) and the final
spin_lock(table_lock). A concurrent drm_gem_handle_delete on the old
handle succeeds in this window, decrements handle_count to 0, and frees
the GEM object while the new handle's IDR entry still references it.
NULL the old handle's IDR entry before dropping table_lock so that any
concurrent GEM_CLOSE on the old handle sees NULL and returns -EINVAL.
Restore the old entry on the prime-bookkeeping error path.
Fixes: 5e28b7b944 ("drm: Set old handle to NULL before prime swap in change_handle")
Signed-off-by: Zhenghang Xiao <kipreyyy@gmail.com>
Cc: stable@vger.kernel.org
Signed-off-by: Dave Airlie <airlied@redhat.com>
Link: https://patch.msgid.link/20260526085313.26791-1-kipreyyy@gmail.com
Pull kvm fixes from Paolo Bonzini:
"arm64:
- Restore CONFIG_PKVM_DISABLE_STAGE2_ON_PANIC to its former glory by
making sure the config symbol is correctly spelled out in the code
- Don't reset the AArch32 view of the PMU counters to zero when the
guest is writing to them
- Fix an assorted collection of memory leaks in the newly added
tracing code
- Fix the capping of ZCR_EL2 which could be used in an unsanitised
way by an L2 guest
x86:
- Include the kernel's linux/mman.h in KVM selftests to ensure
MADV_COLLAPSE is defined, as older libc versions may not provide
it.
- Include execinfo.h if and only if KVM selftests are building
against glibc, and provide a test_dump_stack() for non-glibc
builds.
- Silence an annoying RCU splat on (even non-KVM-related) panics.
The splat is technically legit, but in practice not an issue. To
have a race, you would need to unload the KVM modules at exactly
the time a panic happens; and speaking of incredibly rare races,
taking the locks risks introducing a deadlock if the module unload
code took the lock on a CPU that has been halted. Which seems
possibly more likely than the RCU grace period issue, so just shut
it up. This code used to be in KVM but is now outside it; but the
x86 maintainers haven't picked it up, so here we are.
- Rate-limit global clock updates once again (but without delayed
work), as KVM was subtly relying on the old rate-limiting for NPT
correction to guard against "update storms" when running without a
master clock on systems with overcommitted CPUs.
- Fix a brown paper bag goof where KVM checked if ERAPS is "dirty"
instead of marking it dirty when emulating INVPCID.
- Flush the TLB when transitioning from xAVIC => x2AVIC to ensure the
CPU TLB doesn't contain AVIC-tagged entries for the APIC base GPA.
- The top 10 commits fix buffer overflow (and potential TOC/TOU)
flaws in the page state change protocol for encrypted VMs. AI
models find it quite easily given it was reported three times, but
aren't as good at writing a comprehensive fix. There's more to
clean up in the area, which will come in 7.2"
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (22 commits)
KVM: SEV: Use READ_ONCE() when reading entries/indices from PSC buffer
KVM: SEV: Check PSC request indices against the actual size of the buffer
KVM: SEV: Don't explicitly pass PSC buffer to snp_begin_psc()
KVM: SEV: WARN if KVM attempts to setup scratch area with min_len==0
KVM: SEV: Compute the correct max length of the in-GHCB scratch area
KVM: SEV: Use the size of the PSC header as the minimum size for PSC requests
KVM: SEV: Ignore Port I/O requests of length '0'
KVM: SEV: Reject MMIO requests larger than 8 bytes with GHCB v2+
KVM: SEV: Ignore MMIO requests of length '0'
KVM: SEV: Require in-GHCB scratch area if GHCB v2+ is in use
KVM: arm64: Correctly cap ZCR_EL2 provided by a guest hypervisor
KVM: arm64: Fix memory leak in hyp_trace_unload()
KVM: arm64: Fix rollback in hyp_trace_buffer_share_hyp()
KVM: arm64: Fix meta-page unsharing in pKVM hyp tracing
KVM: arm64: PMU: Preserve AArch32 counter low bits
KVM: SVM: Flush the current TLB when transitioning from xAVIC => x2AVIC
KVM: x86: Fix ERAPS RAP clear on INVPCID single-context invalidation
KVM: arm64: Fix CONFIG_PKVM_DISABLE_STAGE2_ON_PANIC
KVM: selftests: Guard execinfo.h inclusion for non-glibc builds
KVM: x86: Rate-limit global clock updates on vCPU load
...
Short summary of fixes pull:
amdxdna:
- require IOMMU on AIE2
dumb-buffer:
- prevent overflows in dumb-buffer creation
dma-buf:
- fix UAF in dma_buf_fd() tracepoint
hyperv:
- improve protocol validation
ivpu:
- test write offset in debugfs
rocket:
- fix UAF in bo creation
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://patch.msgid.link/20260529070009.GA313534@linux.fritz.box
Jason A. Donenfeld says:
====================
WireGuard fixes for 7.1-rc6
Please find one small patch, fixing the order of adding padding onto a
packet, to ensure padding bytes get zeroed properly.
====================
Link: https://patch.msgid.link/20260529173134.3080773-1-Jason@zx2c4.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
With how this is currently written, we add the trailer, zero it out, and
then add the header space on. If that header space requires a
reallocation + copy, the zeros in the trailer aren't copied, because the
skb len hasn't actually been yet expanded to cover that. Instead add the
padding at the end of the process rather than at the beginning.
Fixes: e7096c131e ("net: WireGuard secure network tunnel")
Cc: stable@vger.kernel.org
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
Link: https://patch.msgid.link/20260529173134.3080773-2-Jason@zx2c4.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Chris Adams reported that preserving insertion order for same-scope
addresses is causing SSH connections to be dropped after stopping a VM
while running NetworkManager.
NetworkManager caches the IPv6 address configuration, when a RA arrives,
it determines the list of addresses to configure and checks if the
addresses are already in the right order in the kernel. If they aren't,
NetworkManager removes and re-adds them to achieve the desired order.
As the order changes, NetworkManager is confused and reconfigures the
addresses on every update. In addition, this would also affect to cloud
tooling that relies on IPv6 addresses order to identify primary and
secondaries addresses.
This reverts commit cb3de96eea.
Fixes: cb3de96eea ("ipv6: preserve insertion order for same-scope addresses")
Reported-by: Chris Adams <linux@cmadams.net>
Closes: https://lore.kernel.org/netdev/20260521135310.GC977@cmadams.net/
Signed-off-by: Fernando Fernandez Mancera <fmancera@suse.de>
Link: https://patch.msgid.link/20260529112357.5079-1-fmancera@suse.de
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Steffen Klassert says:
====================
pull request (net): ipsec 2026-05-29
1) xfrm: route MIGRATE notifications to caller's netns
Thread the caller's netns through km_migrate() so that
MIGRATE notifications go to the issuing netns, fixing both the
init_net listener leak and MOBIKE notifications inside
non-init netns. From Maoyi Xie.
2) xfrm: ipcomp: Free destination pages on acomp errors
Move the out_free_req label up so that allocated destination
pages are released on decompression errors, not only on success.
From Herbert Xu.
3) xfrm: Check for underflow in xfrm_state_mtu
Reject configurations that cause xfrm_state_mtu() to underflow,
preventing a negative TFCPAD value from becoming a memset size
that triggers an out-of-bounds write of several terabytes.
From David Ahern.
4) xfrm: ah: use skb_to_full_sk in async output callbacks
Convert the possibly-incomplete skb->sk to a full socket pointer
in async AH callbacks so that a request_sock or timewait_sock
never reaches xfrm_output_resume() downstream consumers.
From Michael Bommarito.
5) Add and revert: esp: fix page frag reference leak on skb_to_sgvec failure
The patch does not fix te issue completely.
6) xfrm: esp: restore combined single-frag length gate
Check the aligned post-trailer combined length against a page limit
in the fast path, preventing skb_page_frag_refill() from falling
back to a page too small for the destination scatterlist.
From Jingguo Tan.
7) xfrm: iptfs: reset runtime state when cloning SAs
Reinitialise the clone's mode_data runtime objects before
publishing it, preventing queued skbs from being freed with
list state copied from the original SA when migration fails.
From Shaomin Chen.
8) xfrm: move policy_bydst RCU sync from per-netns .exit to .pre_exit
Flush policy tables and drain the workqueue in a .pre_exit handler
so that cleanup_net() pays one RCU grace period per batch instead
of one per namespace, fixing stalls at high CLONE_NEWNET rates.
From Usama Arif.
9) xfrm: input: hold netns during deferred transport reinjection
Take a netns reference when queueing deferred transport reinjection
work and drop it after the callback completes, keeping the skb->cb
net pointer valid until the deferred work runs.
From Zhengchuan Liang.
* tag 'ipsec-2026-05-29' of git://git.kernel.org/pub/scm/linux/kernel/git/klassert/ipsec:
Revert "esp: fix page frag reference leak on skb_to_sgvec failure"
xfrm: input: hold netns during deferred transport reinjection
xfrm: move policy_bydst RCU sync from per-netns .exit to .pre_exit
xfrm: iptfs: reset runtime state when cloning SAs
xfrm: esp: restore combined single-frag length gate
esp: fix page frag reference leak on skb_to_sgvec failure
xfrm: ah: use skb_to_full_sk in async output callbacks
xfrm: Check for underflow in xfrm_state_mtu
xfrm: ipcomp: Free destination pages on acomp errors
xfrm: route MIGRATE notifications to caller's netns
====================
Link: https://patch.msgid.link/20260529092648.3878973-1-steffen.klassert@secunet.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
bui duc phuc
Felix Gu
Zhang Heng
Vijendar Mukunda
Richard Fitzgerald
Aleksander Pshenitsyn
David Glushkov
Chancel Liu
João Miguel
Jackie Dong
Linus Torvalds
Henri A
Alexis Bouzigues
Wolfram Sang
Greg Kroah-Hartman
Andrei Vagin
Zhenghang Xiao
Dave Airlie
Jakub Kicinski
Jason A. Donenfeld
Fernando Fernandez Mancera
Pavel Begunkov