Currently, UBLK_IO_REGISTER_IO_BUF and UBLK_IO_UNREGISTER_IO_BUF are
only permitted on the ublk_io's daemon task. But this restriction is
unnecessary. ublk_register_io_buf() calls __ublk_check_and_get_req() to
look up the request from the tagset and atomically take a reference on
the request without accessing the ublk_io. ublk_unregister_io_buf()
doesn't use the q_id or tag at all.
So allow these opcodes even on tasks other than io->task.
Handle UBLK_IO_UNREGISTER_IO_BUF before obtaining the ubq and io since
the buffer index being unregistered is not necessarily related to the
specified q_id and tag.
Add a feature flag UBLK_F_BUF_REG_OFF_DAEMON that userspace can use to
determine whether the kernel supports off-daemon buffer registration.
Suggested-by: Ming Lei <ming.lei@redhat.com>
Signed-off-by: Caleb Sander Mateos <csander@purestorage.com>
Reviewed-by: Ming Lei <ming.lei@redhat.com>
Link: https://lore.kernel.org/r/20250620151008.3976463-10-csander@purestorage.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
UBLK_IO_UNREGISTER_IO_BUF currently requires a valid q_id and tag to be
passed in the ublksrv_io_cmd. However, only the addr (registered buffer
index) is actually used to unregister the buffer. There is no check that
the q_id and tag are for the ublk request whose buffer is registered at
the given index. To prepare to allow userspace to omit the q_id and tag,
check the UBLK_F_SUPPORT_ZERO_COPY flag on the ublk_device instead of
the ublk_queue.
Signed-off-by: Caleb Sander Mateos <csander@purestorage.com>
Reviewed-by: Ming Lei <ming.lei@redhat.com>
Link: https://lore.kernel.org/r/20250620151008.3976463-9-csander@purestorage.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
__ublk_check_and_get_req() attempts to atomically look up the struct
request for a ublk I/O and take a reference on it. However, the request
can be freed between the lookup on the tagset in blk_mq_tag_to_rq() and
the increment of its reference count in ublk_get_req_ref(), for example
if an elevator switch happens concurrently.
Fix the potential use after free by moving the reference count from
ublk_rq_data to ublk_io. Move the fields buf_index and buf_ctx_handle
too to reduce the number of cache lines touched when dispatching and
completing a ublk I/O, allowing ublk_rq_data to be removed entirely.
Suggested-by: Ming Lei <ming.lei@redhat.com>
Signed-off-by: Caleb Sander Mateos <csander@purestorage.com>
Fixes: 62fe99cef9 ("ublk: add read()/write() support for ublk char device")
Reviewed-by: Ming Lei <ming.lei@redhat.com>
Link: https://lore.kernel.org/r/20250620151008.3976463-3-csander@purestorage.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
struct ublk_device's __queues points to an allocation with up to
UBLK_MAX_NR_QUEUES (4096) queues, each of which have:
- struct ublk_queue (48 bytes)
- Tail array of up to UBLK_MAX_QUEUE_DEPTH (4096) struct ublk_io's,
32 bytes each
This means the full allocation can exceed 512 MB, which may well be
impossible to service with contiguous physical pages. Switch to
kvcalloc() and kvfree(), since there is no need for physically
contiguous memory.
Signed-off-by: Caleb Sander Mateos <csander@purestorage.com>
Fixes: 71f28f3136 ("ublk_drv: add io_uring based userspace block driver")
Reviewed-by: Ming Lei <ming.lei@redhat.com>
Link: https://lore.kernel.org/r/20250620151008.3976463-2-csander@purestorage.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Use the blk_rq_dma_map API to DMA map requests instead of scatterlists.
This removes the need to allocate a scatterlist covering every segment,
and thus the overall transfer length limit based on the scatterlist
allocation.
Instead the DMA mapping is done by iterating the bio_vec chain in the
request directly. The unmap is handled differently depending on how
we mapped:
- when using an IOMMU only a single IOVA is used, and it is stored in
iova_state
- for direct mappings that don't use swiotlb and are cache coherent,
unmap is not needed at all
- for direct mappings that are not cache coherent or use swiotlb, the
physical addresses are rebuild from the PRPs or SGL segments
The latter unfortunately adds a fair amount of code to the driver, but
it is code not used in the fast path.
The conversion only covers the data mapping path, and still uses a
scatterlist for the multi-segment metadata case. I plan to convert that
as soon as we have good test coverage for the multi-segment metadata
path.
Thanks to Chaitanya Kulkarni for an initial attempt at a new DMA API
conversion for nvme-pci, Kanchan Joshi for bringing back the single
segment optimization, Leon Romanovsky for shepherding this through a
gazillion rebases and Nitesh Shetty for various improvements.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Keith Busch <kbusch@kernel.org>
Reviewed-by: Leon Romanovsky <leonro@nvidia.com>
Link: https://lore.kernel.org/r/20250625113531.522027-7-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Move the average segment size into a separate helper, and return a
tristate to distinguish the case where can use SGL vs where we have to
use SGLs. This will allow the simplify the code and make more efficient
decisions in follow on changes.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Keith Busch <kbusch@kernel.org>
Link: https://lore.kernel.org/r/20250625113531.522027-4-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Add a new blk_rq_dma_map / blk_rq_dma_unmap pair that does away with
the wasteful scatterlist structure. Instead it uses the mapping iterator
to either add segments to the IOVA for IOMMU operations, or just maps
them one by one for the direct mapping. For the IOMMU case instead of
a scatterlist with an entry for each segment, only a single [dma_addr,len]
pair needs to be stored for processing a request, and for the direct
mapping the per-segment allocation shrinks from
[page,offset,len,dma_addr,dma_len] to just [dma_addr,len].
One big difference to the scatterlist API, which could be considered
downside, is that the IOVA collapsing only works when the driver sets
a virt_boundary that matches the IOMMU granule. For NVMe this is done
already so it works perfectly.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Keith Busch <kbusch@kernel.org>
Reviewed-by: Leon Romanovsky <leonro@nvidia.com>
Link: https://lore.kernel.org/r/20250625113531.522027-3-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
To get out of the DMA mapping helpers having to check every segment for
it's P2P status, ensure that bios either contain P2P transfers or non-P2P
transfers, and that a P2P bio only contains ranges from a single device.
This means we do the page zone access in the bio add path where it should
be still page hot, and will only have do the fairly expensive P2P topology
lookup once per bio down in the DMA mapping path, and only for already
marked bios.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Keith Busch <kbusch@kernel.org>
Reviewed-by: Logan Gunthorpe <logang@deltatee.com>
Reviewed-by: Leon Romanovsky <leonro@nvidia.com>
Link: https://lore.kernel.org/r/20250625113531.522027-2-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
DM targets must not split zone append and write operations using
dm_accept_partial_bio() as doing so is forbidden for zone append BIOs,
breaks zone append emulation using regular write BIOs and potentially
creates deadlock situations with queue freeze operations.
Modify dm_accept_partial_bio() to add missing BUG_ON() checks for all
these cases, that is, check that the BIO is a write or write zeroes
operation. This change packs all the zone related checks together under
a static_branch_unlikely(&zoned_enabled) and done only if the target is
a zoned device.
Fixes: f211268ed1 ("dm: Use the block layer zone append emulation")
Cc: stable@vger.kernel.org
Signed-off-by: Damien Le Moal <dlemoal@kernel.org>
Reviewed-by: Mikulas Patocka <mpatocka@redhat.com>
Link: https://lore.kernel.org/r/20250625093327.548866-6-dlemoal@kernel.org
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Read and write operations issued to a dm-crypt target may be split
according to the dm-crypt internal limits defined by the max_read_size
and max_write_size module parameters (default is 128 KB). The intent is
to improve processing time of large BIOs by splitting them into smaller
operations that can be parallelized on different CPUs.
For zoned dm-crypt targets, this BIO splitting is still done but without
the parallel execution to ensure that the issuing order of write
operations to the underlying devices remains sequential. However, the
splitting itself causes other problems:
1) Since dm-crypt relies on the block layer zone write plugging to
handle zone append emulation using regular write operations, the
reminder of a split write BIO will always be plugged into the target
zone write plugged. Once the on-going write BIO finishes, this
reminder BIO is unplugged and issued from the zone write plug work.
If this reminder BIO itself needs to be split, the reminder will be
re-issued and plugged again, but that causes a call to a
blk_queue_enter(), which may block if a queue freeze operation was
initiated. This results in a deadlock as DM submission still holds
BIOs that the queue freeze side is waiting for.
2) dm-crypt relies on the emulation done by the block layer using
regular write operations for processing zone append operations. This
still requires to properly return the written sector as the BIO
sector of the original BIO. However, this can be done correctly only
and only if there is a single clone BIO used for processing the
original zone append operation issued by the user. If the size of a
zone append operation is larger than dm-crypt max_write_size, then
the orginal BIO will be split and processed as a chain of regular
write operations. Such chaining result in an incorrect written sector
being returned to the zone append issuer using the original BIO
sector. This in turn results in file system data corruptions using
xfs or btrfs.
Fix this by modifying get_max_request_size() to always return the size
of the BIO to avoid it being split with dm_accpet_partial_bio() in
crypt_map(). get_max_request_size() is renamed to
get_max_request_sectors() to clarify the unit of the value returned
and its interface is changed to take a struct dm_target pointer and a
pointer to the struct bio being processed. In addition to this change,
to ensure that crypt_alloc_buffer() works correctly, set the dm-crypt
device max_hw_sectors limit to be at most
BIO_MAX_VECS << PAGE_SECTORS_SHIFT (1 MB with a 4KB page architecture).
This forces DM core to split write BIOs before passing them to
crypt_map(), and thus guaranteeing that dm-crypt can always accept an
entire write BIO without needing to split it.
This change does not have any effect on the read path of dm-crypt. Read
operations can still be split and the BIO fragments processed in
parallel. There is also no impact on the performance of the write path
given that all zone write BIOs were already processed inline instead of
in parallel.
This change also does not affect in any way regular dm-crypt block
devices.
Fixes: f211268ed1 ("dm: Use the block layer zone append emulation")
Cc: stable@vger.kernel.org
Signed-off-by: Damien Le Moal <dlemoal@kernel.org>
Reviewed-by: Mikulas Patocka <mpatocka@redhat.com>
Link: https://lore.kernel.org/r/20250625093327.548866-5-dlemoal@kernel.org
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Any zoned DM target that requires zone append emulation will use the
block layer zone write plugging. In such case, DM target drivers must
not split BIOs using dm_accept_partial_bio() as doing so can potentially
lead to deadlocks with queue freeze operations. Regular write operations
used to emulate zone append operations also cannot be split by the
target driver as that would result in an invalid writen sector value
return using the BIO sector.
In order for zoned DM target drivers to avoid such incorrect BIO
splitting, we must ensure that large BIOs are split before being passed
to the map() function of the target, thus guaranteeing that the
limits for the mapped device are not exceeded.
dm-crypt and dm-flakey are the only target drivers supporting zoned
devices and using dm_accept_partial_bio().
In the case of dm-crypt, this function is used to split BIOs to the
internal max_write_size limit (which will be suppressed in a different
patch). However, since crypt_alloc_buffer() uses a bioset allowing only
up to BIO_MAX_VECS (256) vectors in a BIO. The dm-crypt device
max_segments limit, which is not set and so default to BLK_MAX_SEGMENTS
(128), must thus be respected and write BIOs split accordingly.
In the case of dm-flakey, since zone append emulation is not required,
the block layer zone write plugging is not used and no splitting of BIOs
required.
Modify the function dm_zone_bio_needs_split() to use the block layer
helper function bio_needs_zone_write_plugging() to force a call to
bio_split_to_limits() in dm_split_and_process_bio(). This allows DM
target drivers to avoid using dm_accept_partial_bio() for write
operations on zoned DM devices.
Fixes: f211268ed1 ("dm: Use the block layer zone append emulation")
Cc: stable@vger.kernel.org
Signed-off-by: Damien Le Moal <dlemoal@kernel.org>
Reviewed-by: Mikulas Patocka <mpatocka@redhat.com>
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Link: https://lore.kernel.org/r/20250625093327.548866-4-dlemoal@kernel.org
Signed-off-by: Jens Axboe <axboe@kernel.dk>
In preparation for fixing device mapper zone write handling, introduce
the inline helper function bio_needs_zone_write_plugging() to test if a
BIO requires handling through zone write plugging using the function
blk_zone_plug_bio(). This function returns true for any write
(op_is_write(bio) == true) operation directed at a zoned block device
using zone write plugging, that is, a block device with a disk that has
a zone write plug hash table.
This helper allows simplifying the check on entry to blk_zone_plug_bio()
and used in to protect calls to it for blk-mq devices and DM devices.
Fixes: f211268ed1 ("dm: Use the block layer zone append emulation")
Cc: stable@vger.kernel.org
Signed-off-by: Damien Le Moal <dlemoal@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/20250625093327.548866-3-dlemoal@kernel.org
Signed-off-by: Jens Axboe <axboe@kernel.dk>
REQ_OP_ZONE_FINISH is defined as "12", which makes
op_is_write(REQ_OP_ZONE_FINISH) return false, despite the fact that a
zone finish operation is an operation that modifies a zone (transition
it to full) and so should be considered as a write operation (albeit
one that does not transfer any data to the device).
Fix this by redefining REQ_OP_ZONE_FINISH to be an odd number (13), and
redefine REQ_OP_ZONE_RESET and REQ_OP_ZONE_RESET_ALL using sequential
odd numbers from that new value.
Fixes: 6c1b1da58f ("block: add zone open, close and finish operations")
Cc: stable@vger.kernel.org
Signed-off-by: Damien Le Moal <dlemoal@kernel.org>
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/20250625093327.548866-2-dlemoal@kernel.org
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Back in 2015, commit d2be537c3b ("block: bump BLK_DEF_MAX_SECTORS to
2560") increased the default maximum size of a block device I/O to 2560
sectors (1280 KiB) to "accommodate a 10-data-disk stripe write with
chunk size 128k". This choice is rather arbitrary and since then,
improvements to the block layer have software RAID drivers correctly
advertize their stripe width through chunk_sectors and abuses of
BLK_DEF_MAX_SECTORS_CAP by drivers (to set the HW limit rather than the
default user controlled maximum I/O size) have been fixed.
Since many block devices can benefit from a larger value of
BLK_DEF_MAX_SECTORS_CAP, and in particular HDDs, increase this value to
be 4MiB, or 8192 sectors.
And given that BLK_DEF_MAX_SECTORS_CAP is only used in the block layer
and should not be used by drivers directly, move this macro definition
to the block layer internal header file block/blk.h.
Suggested-by: Martin K . Petersen <martin.petersen@oracle.com>
Signed-off-by: Damien Le Moal <dlemoal@kernel.org>
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: John Garry <john.g.garry@oracle.com>
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Link: https://lore.kernel.org/r/20250618060045.37593-1-dlemoal@kernel.org
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Pull staging driver fix from Greg KH:
"Here is a single staging driver fix for 6.16-rc4. It resolves a build
error in the rtl8723bs driver for some versions of clang on arm64 when
checking the frame size with -Wframe-larger-than.
It has been in linux-next for a while now with no reported issues"
* tag 'staging-6.16-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging:
staging: rtl8723bs: Avoid memset() in aes_cipher() and aes_decipher()
Pull tty/serial driver fixes from Greg KH:
"Here are five small serial and tty and vt fixes for 6.16-rc4. Included
in here are:
- kerneldoc fixes for recent vt changes
- imx serial driver fix
- of_node sysfs fix for a regression
- vt missing notification fix
- 8250 dt bindings fix
All of these have been in linux-next for a while with no reported issues"
* tag 'tty-6.16-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty:
dt-bindings: serial: 8250: Make clocks and clock-frequency exclusive
serial: imx: Restore original RXTL for console to fix data loss
serial: core: restore of_node information in sysfs
vt: fix kernel-doc warnings in ucs_get_fallback()
vt: add missing notification when switching back to text mode
Pull EDAC fix from Borislav Petkov:
- Consider secondary address mask registers in amd64_edac in order to
get the correct total memory size of the system
* tag 'edac_urgent_for_v6.16_rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/ras/ras:
EDAC/amd64: Fix size calculation for Non-Power-of-Two DIMMs
Pull x86 fixes from Borislav Petkov:
- Make sure DR6 and DR7 are initialized to their architectural values
and not accidentally cleared, leading to misconfigurations
* tag 'x86_urgent_for_v6.16_rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/traps: Initialize DR7 by writing its architectural reset value
x86/traps: Initialize DR6 by writing its architectural reset value
Pull perf fix from Borislav Petkov:
- Make sure an AUX perf event is really disabled when it overruns
* tag 'perf_urgent_for_v6.16_rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
perf/aux: Fix pending disable flow when the AUX ring buffer overruns
Pull locking fix from Borislav Petkov:
- Make sure the new futex phash is not copied during fork in order to
avoid a double-free
* tag 'locking_urgent_for_v6.16_rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
futex: Initialize futex_phash_new during fork().
Pull i2c fixes from Wolfram Sang:
- imx: fix SMBus protocol compliance during block read
- omap: fix error handling path in probe
- robotfuzz, tiny-usb: prevent zero-length reads
- x86, designware, amdisp: fix build error when modules are disabled
(agreed to go in via i2c)
- scx200_acb: fix build error because of missing HAS_IOPORT
* tag 'i2c-for-6.16-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux:
i2c: scx200_acb: depends on HAS_IOPORT
i2c: omap: Fix an error handling path in omap_i2c_probe()
platform/x86: Use i2c adapter name to fix build errors
i2c: amd-isp: Initialize unique adapter name
i2c: designware: Initialize adapter name only when not set
i2c: tiny-usb: disable zero-length read messages
i2c: robotfuzz-osif: disable zero-length read messages
i2c: imx: fix emulated smbus block read
Pull tracing fix from Steven Rostedt:
- Fix possible UAF on error path in filter_free_subsystem_filters()
When freeing a subsystem filter, the filter for the subsystem is
passed in to be freed and all the events within the subsystem will
have their filter freed too. In order to free without waiting for RCU
synchronization, list items are allocated to hold what is going to be
freed to free it via a call_rcu(). If the allocation of these items
fails, it will call the synchronization directly and free after that
(causing a bit of delay for the user).
The subsystem filter is first added to this list and then the filters
for all the events under the subsystem. The bug is if one of the
allocations of the list items for the event filters fail to allocate,
it jumps to the "free_now" label which will free the subsystem
filter, then all the items on the allocated list, and then the event
filters that were not added to the list yet. But because the
subsystem filter was added first, it gets freed twice.
The solution is to add the subsystem filter after the events, and
then if any of the allocations fail it will not try to free any of
them twice
* tag 'trace-v6.16-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace:
tracing: Fix filter logic error
Pull LoongArch fixes from Huacai Chen:
- replace __ASSEMBLY__ with __ASSEMBLER__ in headers like others
- fix build warnings about export.h
- reserve the EFI memory map region for kdump
- handle __init vs inline mismatches
- fix some KVM bugs
* tag 'loongarch-fixes-6.16-1' of git://git.kernel.org/pub/scm/linux/kernel/git/chenhuacai/linux-loongson:
LoongArch: KVM: Disable updating of "num_cpu" and "feature"
LoongArch: KVM: Check validity of "num_cpu" from user space
LoongArch: KVM: Check interrupt route from physical CPU
LoongArch: KVM: Fix interrupt route update with EIOINTC
LoongArch: KVM: Add address alignment check for IOCSR emulation
LoongArch: KVM: Avoid overflow with array index
LoongArch: Handle KCOV __init vs inline mismatches
LoongArch: Reserve the EFI memory map region
LoongArch: Fix build warnings about export.h
LoongArch: Replace __ASSEMBLY__ with __ASSEMBLER__ in headers
Pull smb client fixes from Steve French:
- Multichannel reconnect lock ordering deadlock fix
- Fix for regression in handling native Windows symlinks
- Three smbdirect fixes:
- oops in RDMA response processing
- smbdirect memcpy issue
- fix smbdirect regression with large writes (smbdirect test cases
now all passing)
- Fix for "FAILED_TO_PARSE" warning in trace-cmd report output
* tag 'v6.16-rc3-smb3-client-fixes' of git://git.samba.org/sfrench/cifs-2.6:
cifs: Fix reading into an ITER_FOLIOQ from the smbdirect code
cifs: Fix the smbd_response slab to allow usercopy
smb: client: fix potential deadlock when reconnecting channels
smb: client: remove \t from TP_printk statements
smb: client: let smbd_post_send_iter() respect the peers max_send_size and transmit all data
smb: client: fix regression with native SMB symlinks
Pull misc fixes from Andrew Morton:
"16 hotfixes.
6 are cc:stable and the remainder address post-6.15 issues or aren't
considered necessary for -stable kernels. 5 are for MM"
* tag 'mm-hotfixes-stable-2025-06-27-16-56' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm:
MAINTAINERS: add Lorenzo as THP co-maintainer
mailmap: update Duje Mihanović's email address
selftests/mm: fix validate_addr() helper
crashdump: add CONFIG_KEYS dependency
mailmap: correct name for a historical account of Zijun Hu
mailmap: add entries for Zijun Hu
fuse: fix runtime warning on truncate_folio_batch_exceptionals()
scripts/gdb: fix dentry_name() lookup
mm/damon/sysfs-schemes: free old damon_sysfs_scheme_filter->memcg_path on write
mm/alloc_tag: fix the kmemleak false positive issue in the allocation of the percpu variable tag->counters
lib/group_cpus: fix NULL pointer dereference from group_cpus_evenly()
mm/hugetlb: remove unnecessary holding of hugetlb_lock
MAINTAINERS: add missing files to mm page alloc section
MAINTAINERS: add tree entry to mm init block
mm: add OOM killer maintainer structure
fs/proc/task_mmu: fix PAGE_IS_PFNZERO detection for the huge zero folio
Pull RISC-V Fixes for 5.16-rc4
- .rodata is no longer linkd into PT_DYNAMIC.
It was not supposed to be there in the first place and resulted in
invalid (but unused) entries. This manifests as at least warnings in
llvm-readelf
- A fix for runtime constants with all-0 upper 32-bits. This should
only manifest on MMU=n kernels
- A fix for context save/restore on systems using the T-Head vector
extensions
- A fix for a conflicting "+r"/"r" register constraint in the VDSO
getrandom syscall wrapper, which is undefined behavior in clang
- A fix for a missing register clobber in the RVV raid6 implementation.
This manifests as a NULL pointer reference on some compilers, but
could trigger in other ways
- Misaligned accesses from userspace at faulting addresses are now
handled correctly
- A fix for an incorrect optimization that allowed access_ok() to mark
invalid addresses as accessible, which can result in userspace
triggering BUG()s
- A few fixes for build warnings, and an update to Drew's email address
* tag 'riscv-for-linus-5.16-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux:
riscv: export boot_cpu_hartid
Revert "riscv: Define TASK_SIZE_MAX for __access_ok()"
riscv: Fix sparse warning in vendor_extensions/sifive.c
Revert "riscv: misaligned: fix sleeping function called during misaligned access handling"
MAINTAINERS: Update Drew Fustini's email address
RISC-V: uaccess: Wrap the get_user_8 uaccess macro
raid6: riscv: Fix NULL pointer dereference caused by a missing clobber
RISC-V: vDSO: Correct inline assembly constraints in the getrandom syscall wrapper
riscv: vector: Fix context save/restore with xtheadvector
riscv: fix runtime constant support for nommu kernels
riscv: vdso: Exclude .rodata from the PT_DYNAMIC segment
Pull PCI fix from Bjorn Helgaas:
- Fix a PTM debugfs build error with CONFIG_DEBUG_FS=n &&
CONFIG_PCIE_PTM=y (Manivannan Sadhasivam)
* tag 'pci-v6.16-fixes-2' of git://git.kernel.org/pub/scm/linux/kernel/git/pci/pci:
PCI/PTM: Build debugfs code only if CONFIG_DEBUG_FS is enabled
Pull drm fixes from Dave Airlie:
"Regular weekly drm updates, nothing out of the ordinary, amdgpu, xe,
i915 and a few misc bits. Seems about right for this time in the
release cycle.
core:
- fix drm_writeback_connector_cleanup function signature
- use correct HDMI audio bridge in drm_connector_hdmi_audio_init
bridge:
- SN65DSI86: fix HPD
amdgpu:
- Cleaner shader support for additional GFX9 GPUs
- MES firmware compatibility fixes
- Discovery error reporting fixes
- SDMA6/7 userq fixes
- Backlight fix
- EDID sanity check
i915:
- Fix for SNPS PHY HDMI for 1080p@120Hz
- Correct DP AUX DPCD probe address
- Followup build fix for GCOV and AutoFDO enabled config
xe:
- Missing error check
- Fix xe_hwmon_power_max_write
- Move flushes
- Explicitly exit CT safe mode on unwind
- Process deferred GGTT node removals on device unwind"
* tag 'drm-fixes-2025-06-28' of https://gitlab.freedesktop.org/drm/kernel:
drm/xe: Process deferred GGTT node removals on device unwind
drm/xe/guc: Explicitly exit CT safe mode on unwind
drm/xe: move DPT l2 flush to a more sensible place
drm/xe: Move DSB l2 flush to a more sensible place
drm/bridge: ti-sn65dsi86: Add HPD for DisplayPort connector type
drm/i915: fix build error some more
drm/xe/hwmon: Fix xe_hwmon_power_max_write
drm/xe/display: Add check for alloc_ordered_workqueue()
drm/amd/display: Add sanity checks for drm_edid_raw()
drm/amd/display: Fix AMDGPU_MAX_BL_LEVEL value
drm/amdgpu/sdma7: add ucode version checks for userq support
drm/amdgpu/sdma6: add ucode version checks for userq support
drm/amd: Adjust output for discovery error handling
drm/amdgpu/mes: add compatibility checks for set_hw_resource_1
drm/amdgpu/gfx9: Add Cleaner Shader Support for GFX9.x GPUs
drm/bridge-connector: Fix bridge in drm_connector_hdmi_audio_init()
drm/dp: Change AUX DPCD probe address from DPCD_REV to LANE0_1_STATUS
drm/i915/snps_hdmi_pll: Fix 64-bit divisor truncation by using div64_u64
drm: writeback: Fix drm_writeback_connector_cleanup signature
Pull Compute Express Link (CXL) fixes from Dave Jiang:
"These fixes address a few issues in the CXL subsystem, including
dealing with some bugs in the CXL EDAC and RAS drivers:
- Fix return value of cxlctl_validate_set_features()
- Fix min_scrub_cycle of a region miscaculation and add additional
documentation
- Fix potential memory leak issues for CXL EDAC
- Fix CPER handler device confusion for CXL RAS
- Fix using wrong repair type to check DRAM event record"
* tag 'cxl-fixes-6.16-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/cxl/cxl:
cxl/edac: Fix using wrong repair type to check dram event record
cxl/ras: Fix CPER handler device confusion
cxl/edac: Fix potential memory leak issues
cxl/Documentation: Add more description about min/max scrub cycle
cxl/edac: Fix the min_scrub_cycle of a region miscalculation
cxl: fix return value in cxlctl_validate_set_features()
Pull crypto library fix from Eric Biggers:
"Fix a regression where the purgatory code sometimes fails to build"
* tag 'libcrypto-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ebiggers/linux:
lib/crypto: sha256: Mark sha256_choose_blocks as __always_inline
Pull ACPI fix from Rafael Wysocki:
"Revert a commit that attempted to fix a memory leak in an error code
path and introduced a different issue (Zhe Qiao)"
* tag 'acpi-6.16-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
Revert "PCI/ACPI: Fix allocated memory release on error in pci_acpi_scan_root()"
Pull block fixes from Jens Axboe:
- Fixes for ublk:
- fix C++ narrowing warnings in the uapi header
- update/improve UBLK_F_SUPPORT_ZERO_COPY comment in uapi header
- fix for the ublk ->queue_rqs() implementation, limiting a batch
to just the specific task AND ring
- ublk_get_data() error handling fix
- sanity check more arguments in ublk_ctrl_add_dev()
- selftest addition
- NVMe pull request via Christoph:
- reset delayed remove_work after reconnect
- fix atomic write size validation
- Fix for a warning introduced in bdev_count_inflight_rw() in this
merge window
* tag 'block-6.16-20250626' of git://git.kernel.dk/linux:
block: fix false warning in bdev_count_inflight_rw()
ublk: sanity check add_dev input for underflow
nvme: fix atomic write size validation
nvme: refactor the atomic write unit detection
nvme: reset delayed remove_work after reconnect
ublk: setup ublk_io correctly in case of ublk_get_data() failure
ublk: update UBLK_F_SUPPORT_ZERO_COPY comment in UAPI header
ublk: fix narrowing warnings in UAPI header
selftests: ublk: don't take same backing file for more than one ublk devices
ublk: build batch from IOs in same io_ring_ctx and io task
Pull io_uring fixes from Jens Axboe:
- Two tweaks for a recent fix: fixing a memory leak if multiple iovecs
were initially mapped but only the first was used and hence turned
into a UBUF rathan than an IOVEC iterator, and catching a case where
a retry would be done even if the previous segment wasn't full
- Small series fixing an issue making the vm unhappy if debugging is
turned on, hitting a VM_BUG_ON_PAGE()
- Fix a resource leak in io_import_dmabuf() in the error handling case,
which is a regression in this merge window
- Mark fallocate as needing to be write serialized, as is already done
for truncate and buffered writes
* tag 'io_uring-6.16-20250626' of git://git.kernel.dk/linux:
io_uring/kbuf: flag partial buffer mappings
io_uring/net: mark iov as dynamically allocated even for single segments
io_uring: fix resource leak in io_import_dmabuf()
io_uring: don't assume uaddr alignment in io_vec_fill_bvec
io_uring/rsrc: don't rely on user vaddr alignment
io_uring/rsrc: fix folio unpinning
io_uring: make fallocate be hashed work
Pull ata fix from Niklas Cassel:
- Use the correct DMI identifier for ASUSPRO-D840SA LPM quirk such that
the quirk actually gets applied (me)
* tag 'ata-6.16-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/libata/linux:
ata: ahci: Use correct DMI identifier for ASUSPRO-D840SA LPM quirk
Pull s390 fixes from Alexander Gordeev:
- Fix incorrectly dropped dereferencing of the stack nth entry
introduced with a previous KASAN false positive fix
- Use a proper memdup_array_user() helper to prevent overflow in a
protected key size calculation
* tag 's390-6.16-3' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux:
s390/ptrace: Fix pointer dereferencing in regs_get_kernel_stack_nth()
s390/pkey: Prevent overflow in size calculation for memdup_user()
Pull sound fixes from Takashi Iwai:
"A collection of small fixes again:
- A regression fix for hibernation bug in ASoC SoundWire
- Fixes for the new Qualcomm USB offload stuff
- A potential OOB access fix in USB-audio
- A potential memleadk fix in ASoC Intel
- Quirks for HD-audio and ASoC AMD ACP"
* tag 'sound-6.16-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound:
ALSA: hda/realtek: Fix built-in mic on ASUS VivoBook X507UAR
ALSA: usb: qcom: fix NULL pointer dereference in qmi_stop_session
ASoC: SOF: Intel: hda: Use devm_kstrdup() to avoid memleak.
ASoC: rt721-sdca: fix boost gain calculation error
ALSA: qc_audio_offload: Fix missing error code in prepare_qmi_response()
ALSA: hda/realtek: Add mic-mute LED setup for ASUS UM5606
ALSA: usb-audio: Fix out-of-bounds read in snd_usb_get_audioformat_uac3()
ALSA: hda/realtek: fix mute/micmute LEDs for HP EliteBook 6 G1a
ASoC: amd: ps: fix for soundwire failures during hibernation exit sequence
ASoC: amd: yc: Add DMI quirk for Lenovo IdeaPad Slim 5 15
ASoC: amd: yc: add quirk for Acer Nitro ANV15-41 internal mic
ASoC: qcom: sm8250: Fix possibly undefined reference
ALSA: hda/realtek - Enable mute LED on HP Pavilion Laptop 15-eg100
ALSA: hda/realtek: Add quirks for some Clevo laptops
It already depends on X86_32, but that's also set for ARCH=um.
Recent changes made UML no longer have IO port access since
it's not needed, but this driver uses it. Build it only for
HAS_IOPORT. This is pretty much the same as depending on X86,
but on the off-chance that HAS_IOPORT will ever be optional
on x86 HAS_IOPORT is the real prerequisite.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Property "num_cpu" and "feature" are read-only once eiointc is created,
which are set with KVM_DEV_LOONGARCH_EXTIOI_GRP_CTRL attr group before
device creation.
Attr group KVM_DEV_LOONGARCH_EXTIOI_GRP_SW_STATUS is to update register
and software state for migration and reset usage, property "num_cpu" and
"feature" can not be update again if it is created already.
Here discard write operation with property "num_cpu" and "feature" in
attr group KVM_DEV_LOONGARCH_EXTIOI_GRP_CTRL.
Cc: stable@vger.kernel.org
Fixes: 1ad7efa552 ("LoongArch: KVM: Add EIOINTC user mode read and write functions")
Signed-off-by: Bibo Mao <maobibo@loongson.cn>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
The maximum supported cpu number is EIOINTC_ROUTE_MAX_VCPUS about
irqchip EIOINTC, here add validation about cpu number to avoid array
pointer overflow.
Cc: stable@vger.kernel.org
Fixes: 1ad7efa552 ("LoongArch: KVM: Add EIOINTC user mode read and write functions")
Signed-off-by: Bibo Mao <maobibo@loongson.cn>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
