gather_bootmem_prealloc() assumes the start nid as 0 and size as
num_node_state(N_MEMORY). That means in case if memory attached numa
nodes are interleaved, then gather_bootmem_prealloc_parallel() will fail
to scan few of these nodes.
Since memory attached numa nodes can be interleaved in any fashion, hence
ensure that the current code checks for all numa node ids
(.size = nr_node_ids). Let's still keep max_threads as N_MEMORY, so that
it can distributes all nr_node_ids among the these many no. threads.
e.g. qemu cmdline
========================
numa_cmd="-numa node,nodeid=1,memdev=mem1,cpus=2-3 -numa node,nodeid=0,cpus=0-1 -numa dist,src=0,dst=1,val=20"
mem_cmd="-object memory-backend-ram,id=mem1,size=16G"
w/o this patch for cmdline (default_hugepagesz=1GB hugepagesz=1GB hugepages=2):
==========================
~ # cat /proc/meminfo |grep -i huge
AnonHugePages: 0 kB
ShmemHugePages: 0 kB
FileHugePages: 0 kB
HugePages_Total: 0
HugePages_Free: 0
HugePages_Rsvd: 0
HugePages_Surp: 0
Hugepagesize: 1048576 kB
Hugetlb: 0 kB
with this patch for cmdline (default_hugepagesz=1GB hugepagesz=1GB hugepages=2):
===========================
~ # cat /proc/meminfo |grep -i huge
AnonHugePages: 0 kB
ShmemHugePages: 0 kB
FileHugePages: 0 kB
HugePages_Total: 2
HugePages_Free: 2
HugePages_Rsvd: 0
HugePages_Surp: 0
Hugepagesize: 1048576 kB
Hugetlb: 2097152 kB
Link: https://lkml.kernel.org/r/f8d8dad3a5471d284f54185f65d575a6aaab692b.1736592534.git.ritesh.list@gmail.com
Fixes: b78b27d029 ("hugetlb: parallelize 1G hugetlb initialization")
Signed-off-by: Ritesh Harjani (IBM) <ritesh.list@gmail.com>
Reported-by: Pavithra Prakash <pavrampu@linux.ibm.com>
Suggested-by: Muchun Song <muchun.song@linux.dev>
Tested-by: Sourabh Jain <sourabhjain@linux.ibm.com>
Reviewed-by: Luiz Capitulino <luizcap@redhat.com>
Acked-by: David Rientjes <rientjes@google.com>
Cc: Donet Tom <donettom@linux.ibm.com>
Cc: Gang Li <gang.li@linux.dev>
Cc: Daniel Jordan <daniel.m.jordan@oracle.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Since nilfs_bmap_lookup_contig() in nilfs_fiemap() calculates its result
by being prepared to go through potentially maxblocks == INT_MAX blocks,
the value in n may experience an overflow caused by left shift of blkbits.
While it is extremely unlikely to occur, play it safe and cast right hand
expression to wider type to mitigate the issue.
Found by Linux Verification Center (linuxtesting.org) with static analysis
tool SVACE.
Link: https://lkml.kernel.org/r/20250124222133.5323-1-konishi.ryusuke@gmail.com
Fixes: 622daaff0a ("nilfs2: fiemap support")
Signed-off-by: Nikita Zhandarovich <n.zhandarovich@fintech.ru>
Signed-off-by: Ryusuke Konishi <konishi.ryusuke@gmail.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
There are 4 NUMA nodes on my machine, and each NUMA node has 32GB of
memory. I have configured 16GB of CMA memory on each NUMA node, and
starting a 32GB virtual machine with device passthrough is extremely slow,
taking almost an hour.
Long term GUP cannot allocate memory from CMA area, so a maximum of 16 GB
of no-CMA memory on a NUMA node can be used as virtual machine memory.
There is 16GB of free CMA memory on a NUMA node, which is sufficient to
pass the order-0 watermark check, causing the __compaction_suitable()
function to consistently return true.
For costly allocations, if the __compaction_suitable() function always
returns true, it causes the __alloc_pages_slowpath() function to fail to
exit at the appropriate point. This prevents timely fallback to
allocating memory on other nodes, ultimately resulting in excessively long
virtual machine startup times.
Call trace:
__alloc_pages_slowpath
if (compact_result == COMPACT_SKIPPED ||
compact_result == COMPACT_DEFERRED)
goto nopage; // should exit __alloc_pages_slowpath() from here
We could use the real unmovable allocation context to have
__zone_watermark_unusable_free() subtract CMA pages, and thus we won't
pass the order-0 check anymore once the non-CMA part is exhausted. There
is some risk that in some different scenario the compaction could in fact
migrate pages from the exhausted non-CMA part of the zone to the CMA part
and succeed, and we'll skip it instead. But only __GFP_NORETRY
allocations should be affected in the immediate "goto nopage" when
compaction is skipped, others will attempt with DEF_COMPACT_PRIORITY
anyway and won't fail without trying to compact-migrate the non-CMA
pageblocks into CMA pageblocks first, so it should be fine.
After this fix, it only takes a few tens of seconds to start a 32GB
virtual machine with device passthrough functionality.
Link: https://lore.kernel.org/lkml/1736335854-548-1-git-send-email-yangge1116@126.com/
Link: https://lkml.kernel.org/r/1737788037-8439-1-git-send-email-yangge1116@126.com
Signed-off-by: yangge <yangge1116@126.com>
Acked-by: Vlastimil Babka <vbabka@suse.cz>
Reviewed-by: Baolin Wang <baolin.wang@linux.alibaba.com>
Acked-by: Johannes Weiner <hannes@cmpxchg.org>
Cc: Barry Song <21cnbao@gmail.com>
Cc: David Hildenbrand <david@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
If a memory allocation fails during dup_mmap(), the maple tree can be left
in an unsafe state for other iterators besides the exit path. All the
locks are dropped before the exit_mmap() call (in mm/mmap.c), but the
incomplete mm_struct can be reached through (at least) the rmap finding
the vmas which have a pointer back to the mm_struct.
Up to this point, there have been no issues with being able to find an
mm_struct that was only partially initialised. Syzbot was able to make
the incomplete mm_struct fail with recent forking changes, so it has been
proven unsafe to use the mm_struct that hasn't been initialised, as
referenced in the link below.
Although 8ac662f5da ("fork: avoid inappropriate uprobe access to
invalid mm") fixed the uprobe access, it does not completely remove the
race.
This patch sets the MMF_OOM_SKIP to avoid the iteration of the vmas on the
oom side (even though this is extremely unlikely to be selected as an oom
victim in the race window), and sets MMF_UNSTABLE to avoid other potential
users from using a partially initialised mm_struct.
When registering vmas for uprobe, skip the vmas in an mm that is marked
unstable. Modifying a vma in an unstable mm may cause issues if the mm
isn't fully initialised.
Link: https://lore.kernel.org/all/6756d273.050a0220.2477f.003d.GAE@google.com/
Link: https://lkml.kernel.org/r/20250127170221.1761366-1-Liam.Howlett@oracle.com
Fixes: d240629148 ("fork: use __mt_dup() to duplicate maple tree in dup_mmap()")
Signed-off-by: Liam R. Howlett <Liam.Howlett@Oracle.com>
Reviewed-by: Lorenzo Stoakes <lorenzo.stoakes@oracle.com>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Jann Horn <jannh@google.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Peng Zhang <zhangpeng.00@bytedance.com>
Cc: Matthew Wilcox <willy@infradead.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Memblock allocations are registered by kmemleak separately, based on their
physical address. During the scanning stage, it checks whether an object
is within the min_low_pfn and max_low_pfn boundaries and ignores it
otherwise.
With the recent addition of __percpu pointer leak detection (commit
6c99d4eb7c ("kmemleak: enable tracking for percpu pointers")), kmemleak
started reporting leaks in setup_zone_pageset() and
setup_per_cpu_pageset(). These were caused by the node_data[0] object
(initialised in alloc_node_data()) ending on the PFN_PHYS(max_low_pfn)
boundary. The non-strict upper boundary check introduced by commit
84c3262991 ("mm: kmemleak: check physical address when scan") causes the
pg_data_t object to be ignored (not scanned) and the __percpu pointers it
contains to be reported as leaks.
Make the max_low_pfn upper boundary check strict when deciding whether to
ignore a physical address object and not scan it.
Link: https://lkml.kernel.org/r/20250127184233.2974311-1-catalin.marinas@arm.com
Fixes: 84c3262991 ("mm: kmemleak: check physical address when scan")
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Reported-by: Jakub Kicinski <kuba@kernel.org>
Tested-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Cc: Patrick Wang <patrick.wang.shcn@gmail.com>
Cc: <stable@vger.kernel.org> [6.0.x]
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Commit c1b3bb73d5 ("mm/zsmalloc: use zpdesc in
trylock_zspage()/lock_zspage()") introduces is_first_zpdesc() function.
However, the function is only used when CONFIG_DEBUG_VM=y.
When building with LLVM=1 and W=1 option, the following warning is
generated:
$ make -j12 W=1 LLVM=1 mm/zsmalloc.o
mm/zsmalloc.c:455:20: error: function 'is_first_zpdesc' is not needed and will not be emitted [-Werror,-Wunneeded-internal-declaration]
455 | static inline bool is_first_zpdesc(struct zpdesc *zpdesc)
| ^~~~~~~~~~~~~~~
1 error generated.
Fix the warning by adding __maybe_unused attribute to the function.
No functional change intended.
Link: https://lkml.kernel.org/r/20250127231631.4363-1-42.hyeyoo@gmail.com
Fixes: c1b3bb73d5 ("mm/zsmalloc: use zpdesc in trylock_zspage()/lock_zspage()")
Signed-off-by: Hyeonggon Yoo <42.hyeyoo@gmail.com>
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202501240958.4ILzuBrH-lkp@intel.com/
Cc: Alex Shi <alexs@kernel.org>
Cc: Minchan Kim <minchan@kernel.org>
Cc: Sergey Senozhatsky <senozhatsky@chromium.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
This fixes the following hard lockup in isolate_lru_folios() during memory
reclaim. If the LRU mostly contains ineligible folios this may trigger
watchdog.
watchdog: Watchdog detected hard LOCKUP on cpu 173
RIP: 0010:native_queued_spin_lock_slowpath+0x255/0x2a0
Call Trace:
_raw_spin_lock_irqsave+0x31/0x40
folio_lruvec_lock_irqsave+0x5f/0x90
folio_batch_move_lru+0x91/0x150
lru_add_drain_per_cpu+0x1c/0x40
process_one_work+0x17d/0x350
worker_thread+0x27b/0x3a0
kthread+0xe8/0x120
ret_from_fork+0x34/0x50
ret_from_fork_asm+0x1b/0x30
lruvec->lru_lock owner：
PID: 2865 TASK: ffff888139214d40 CPU: 40 COMMAND: "kswapd0"
#0 [fffffe0000945e60] crash_nmi_callback at ffffffffa567a555
#1 [fffffe0000945e68] nmi_handle at ffffffffa563b171
#2 [fffffe0000945eb0] default_do_nmi at ffffffffa6575920
#3 [fffffe0000945ed0] exc_nmi at ffffffffa6575af4
#4 [fffffe0000945ef0] end_repeat_nmi at ffffffffa6601dde
[exception RIP: isolate_lru_folios+403]
RIP: ffffffffa597df53 RSP: ffffc90006fb7c28 RFLAGS: 00000002
RAX: 0000000000000001 RBX: ffffc90006fb7c60 RCX: ffffea04a2196f88
RDX: ffffc90006fb7c60 RSI: ffffc90006fb7c60 RDI: ffffea04a2197048
RBP: ffff88812cbd3010 R8: ffffea04a2197008 R9: 0000000000000001
R10: 0000000000000000 R11: 0000000000000001 R12: ffffea04a2197008
R13: ffffea04a2197048 R14: ffffc90006fb7de8 R15: 0000000003e3e937
ORIG_RAX: ffffffffffffffff CS: 0010 SS: 0018
<NMI exception stack>
#5 [ffffc90006fb7c28] isolate_lru_folios at ffffffffa597df53
#6 [ffffc90006fb7cf8] shrink_active_list at ffffffffa597f788
#7 [ffffc90006fb7da8] balance_pgdat at ffffffffa5986db0
#8 [ffffc90006fb7ec0] kswapd at ffffffffa5987354
#9 [ffffc90006fb7ef8] kthread at ffffffffa5748238
crash>
Scenario:
User processe are requesting a large amount of memory and keep page active.
Then a module continuously requests memory from ZONE_DMA32 area.
Memory reclaim will be triggered due to ZONE_DMA32 watermark alarm reached.
However pages in the LRU(active_anon) list are mostly from
the ZONE_NORMAL area.
Reproduce:
Terminal 1: Construct to continuously increase pages active(anon).
mkdir /tmp/memory
mount -t tmpfs -o size=1024000M tmpfs /tmp/memory
dd if=/dev/zero of=/tmp/memory/block bs=4M
tail /tmp/memory/block
Terminal 2:
vmstat -a 1
active will increase.
procs ---memory--- ---swap-- ---io---- -system-- ---cpu--- ...
r b swpd free inact active si so bi bo
1 0 0 1445623076 45898836 83646008 0 0 0
1 0 0 1445623076 43450228 86094616 0 0 0
1 0 0 1445623076 41003480 88541364 0 0 0
1 0 0 1445623076 38557088 90987756 0 0 0
1 0 0 1445623076 36109688 93435156 0 0 0
1 0 0 1445619552 33663256 95881632 0 0 0
1 0 0 1445619804 31217140 98327792 0 0 0
1 0 0 1445619804 28769988 100774944 0 0 0
1 0 0 1445619804 26322348 103222584 0 0 0
1 0 0 1445619804 23875592 105669340 0 0 0
cat /proc/meminfo | head
Active(anon) increase.
MemTotal: 1579941036 kB
MemFree: 1445618500 kB
MemAvailable: 1453013224 kB
Buffers: 6516 kB
Cached: 128653956 kB
SwapCached: 0 kB
Active: 118110812 kB
Inactive: 11436620 kB
Active(anon): 115345744 kB
Inactive(anon): 945292 kB
When the Active(anon) is 115345744 kB, insmod module triggers
the ZONE_DMA32 watermark.
perf record -e vmscan:mm_vmscan_lru_isolate -aR
perf script
isolate_mode=0 classzone=1 order=1 nr_requested=32 nr_scanned=2
nr_skipped=2 nr_taken=0 lru=active_anon
isolate_mode=0 classzone=1 order=1 nr_requested=32 nr_scanned=0
nr_skipped=0 nr_taken=0 lru=active_anon
isolate_mode=0 classzone=1 order=0 nr_requested=32 nr_scanned=28835844
nr_skipped=28835844 nr_taken=0 lru=active_anon
isolate_mode=0 classzone=1 order=1 nr_requested=32 nr_scanned=28835844
nr_skipped=28835844 nr_taken=0 lru=active_anon
isolate_mode=0 classzone=1 order=0 nr_requested=32 nr_scanned=29
nr_skipped=29 nr_taken=0 lru=active_anon
isolate_mode=0 classzone=1 order=0 nr_requested=32 nr_scanned=0
nr_skipped=0 nr_taken=0 lru=active_anon
See nr_scanned=28835844.
28835844 * 4k = 115343376KB approximately equal to 115345744 kB.
If increase Active(anon) to 1000G then insmod module triggers
the ZONE_DMA32 watermark. hard lockup will occur.
In my device nr_scanned = 0000000003e3e937 when hard lockup.
Convert to memory size 0x0000000003e3e937 * 4KB = 261072092 KB.
[ffffc90006fb7c28] isolate_lru_folios at ffffffffa597df53
ffffc90006fb7c30: 0000000000000020 0000000000000000
ffffc90006fb7c40: ffffc90006fb7d40 ffff88812cbd3000
ffffc90006fb7c50: ffffc90006fb7d30 0000000106fb7de8
ffffc90006fb7c60: ffffea04a2197008 ffffea0006ed4a48
ffffc90006fb7c70: 0000000000000000 0000000000000000
ffffc90006fb7c80: 0000000000000000 0000000000000000
ffffc90006fb7c90: 0000000000000000 0000000000000000
ffffc90006fb7ca0: 0000000000000000 0000000003e3e937
ffffc90006fb7cb0: 0000000000000000 0000000000000000
ffffc90006fb7cc0: 8d7c0b56b7874b00 ffff88812cbd3000
About the Fixes:
Why did it take eight years to be discovered?
The problem requires the following conditions to occur:
1. The device memory should be large enough.
2. Pages in the LRU(active_anon) list are mostly from the ZONE_NORMAL area.
3. The memory in ZONE_DMA32 needs to reach the watermark.
If the memory is not large enough, or if the usage design of ZONE_DMA32
area memory is reasonable, this problem is difficult to detect.
notes:
The problem is most likely to occur in ZONE_DMA32 and ZONE_NORMAL,
but other suitable scenarios may also trigger the problem.
Link: https://lkml.kernel.org/r/20241119060842.274072-1-liuye@kylinos.cn
Fixes: b2e18757f2 ("mm, vmscan: begin reclaiming pages on a per-node basis")
Signed-off-by: liuye <liuye@kylinos.cn>
Cc: Hugh Dickins <hughd@google.com>
Cc: Mel Gorman <mgorman@techsingularity.net>
Cc: Yang Shi <yang@os.amperecomputing.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Pull documentation fixes from Jonathan Corbet:
"Two fixes for footnote-related warnings that appeared with Sphinx 8.x.
We want to encourage use of newer Sphinx - they fixed a performance
problem and the docs build takes less than half the time it used to"
* tag 'docs-6.14-2' of git://git.lwn.net/linux:
docs: power: Fix footnote reference for Toshiba Satellite P10-554
Documentation: ublk: Drop Stefan Hajnoczi's message footnote
Pull s390 fixes from Alexander Gordeev:
- Architecutre-specific ftrace recursion trylock tests were removed in
favour of the generic function_graph_enter(), but s390 got missed.
Remove this test for s390 as well.
- Add ftrace_get_symaddr() for s390, which returns the symbol address
from ftrace 'ip' parameter
* tag 's390-6.14-3' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux:
s390/tracing: Define ftrace_get_symaddr() for s390
s390/fgraph: Fix to remove ftrace_test_recursion_trylock()
Pull more s390 updates from Alexander Gordeev:
- The rework that uncoupled physical and virtual address spaces
inadvertently prevented KASAN shadow mappings from using large pages.
Restore large page mappings for KASAN shadows
- Add decompressor routine physmem_alloc() that may fail, unlike
physmem_alloc_or_die(). This allows callers to implement fallback
paths
- Allow falling back from large pages to smaller pages (1MB or 4KB) if
the allocation of 2GB pages in the decompressor can not be fulfilled
- Add to the decompressor boot print support of "%%" format string,
width and padding hadnling, length modifiers and decimal conversion
specifiers
- Add to the decompressor message severity levels similar to kernel
ones. Support command-line options that control console output
verbosity
- Replaces boot_printk() calls with appropriate loglevel- specific
helpers such as boot_emerg(), boot_warn(), and boot_debug().
- Collect all boot messages into a ring buffer independent of the
current log level. This is particularly useful for early crash
analysis
- If 'earlyprintk' command line parameter is not specified, store
decompressor boot messages in a ring buffer to be printed later by
the kernel, once the console driver is registered
- Add 'bootdebug' command line parameter to enable printing of
decompressor debug messages when needed. That parameters allows
message suppressing and filtering
- Dump boot messages on a decompressor crash, but only if 'bootdebug'
command line parameter is enabled
- When CONFIG_PRINTK_TIME is enabled, add timestamps to boot messages
in the same format as regular printk()
- Dump physical memory tracking information on boot: online ranges,
reserved areas and vmem allocations
- Dump virtual memory layout and randomization details
- Improve decompression error reporting and dump the message ring
buffer in case the boot failed and system halted
- Add an exception handler which handles exceptions when FPU control
register is attempted to be set to an invalid value. Remove '.fixup'
section as result of this change
- Use 'A', 'O', and 'R' inline assembly format flags, which allows
recent Clang compilers to generate better FPU code
- Rework uaccess code so it reads better and generates more efficient
code
- Cleanup futex inline assembly code
- Disable KMSAN instrumention for futex inline assemblies, which
contain dereferenced user pointers. Otherwise, shadows for the user
pointers would be accessed
- PFs which are not initially configured but in standby create only a
single-function PCI domain. If they are configured later on, sibling
PFs and their child VFs will not be added to their PCI domain
breaking SR-IOV expectations.
Fix that by allowing initially configured but in standby PFs create
multi-function PCI domains
- Add '-std=gnu11' to decompressor and purgatory CFLAGS to avoid
compile errors caused by kernel's own definitions of 'bool', 'false',
and 'true' conflicting with the C23 reserved keywords
- Fix sclp subsystem failure when a sclp console is not present
- Fix misuse of non-NULL terminated strings in vmlogrdr driver
- Various other small improvements, cleanups and fixes
* tag 's390-6.14-2' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux: (53 commits)
s390/vmlogrdr: Use array instead of string initializer
s390/vmlogrdr: Use internal_name for error messages
s390/sclp: Initialize sclp subsystem via arch_cpu_finalize_init()
s390/tools: Use array instead of string initializer
s390/vmem: Fix null-pointer-arithmetic warning in vmem_map_init()
s390: Add '-std=gnu11' to decompressor and purgatory CFLAGS
s390/bitops: Use correct constraint for arch_test_bit() inline assembly
s390/pci: Fix SR-IOV for PFs initially in standby
s390/futex: Avoid KMSAN instrumention for user pointers
s390/uaccess: Rename get_put_user_noinstr_attributes to uaccess_kmsan_or_inline
s390/futex: Cleanup futex_atomic_cmpxchg_inatomic()
s390/futex: Generate futex atomic op functions
s390/uaccess: Remove INLINE_COPY_FROM_USER and INLINE_COPY_TO_USER
s390/uaccess: Use asm goto for put_user()/get_user()
s390/uaccess: Remove usage of the oac specifier
s390/uaccess: Replace EX_TABLE_UA_LOAD_MEM exception handling
s390/uaccess: Cleanup noinstr __put_user()/__get_user() inline assembly constraints
s390/uaccess: Remove __put_user_fn()/__get_user_fn() wrappers
s390/uaccess: Move put_user() / __put_user() close to put_user() asm code
s390/uaccess: Use asm goto for __mvc_kernel_nofault()
...
Pull gpio fixes from Bartosz Golaszewski:
- update gpio-sim selftests to not fail now that we no longer allow
rmdir() on configfs entries of active devices
- remove leftover code from gpio-mxc
* tag 'gpio-fixes-for-v6.14-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux:
selftests: gpio: gpio-sim: Fix missing chip disablements
gpio: mxc: remove dead code after switch to DT-only
Pull vfs d_revalidate updates from Al Viro:
"Provide stable parent and name to ->d_revalidate() instances
Most of the filesystem methods where we care about dentry name and
parent have their stability guaranteed by the callers;
->d_revalidate() is the major exception.
It's easy enough for callers to supply stable values for expected name
and expected parent of the dentry being validated. That kills quite a
bit of boilerplate in ->d_revalidate() instances, along with a bunch
of races where they used to access ->d_name without sufficient
precautions"
* tag 'pull-revalidate' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
9p: fix ->rename_sem exclusion
orangefs_d_revalidate(): use stable parent inode and name passed by caller
ocfs2_dentry_revalidate(): use stable parent inode and name passed by caller
nfs: fix ->d_revalidate() UAF on ->d_name accesses
nfs{,4}_lookup_validate(): use stable parent inode passed by caller
gfs2_drevalidate(): use stable parent inode and name passed by caller
fuse_dentry_revalidate(): use stable parent inode and name passed by caller
vfat_revalidate{,_ci}(): use stable parent inode passed by caller
exfat_d_revalidate(): use stable parent inode passed by caller
fscrypt_d_revalidate(): use stable parent inode passed by caller
ceph_d_revalidate(): propagate stable name down into request encoding
ceph_d_revalidate(): use stable parent inode passed by caller
afs_d_revalidate(): use stable name and parent inode passed by caller
Pass parent directory inode and expected name to ->d_revalidate()
generic_ci_d_compare(): use shortname_storage
ext4 fast_commit: make use of name_snapshot primitives
dissolve external_name.u into separate members
make take_dentry_name_snapshot() lockless
dcache: back inline names with a struct-wrapped array of unsigned long
make sure that DNAME_INLINE_LEN is a multiple of word size
Pull ntfs3 fixes from Konstantin Komarov:
- unify inode corruption marking and mark them as bad immediately upon
detection of an error in attribute enumeration
- folio cleanup
* tag 'ntfs3_for_6.14' of https://github.com/Paragon-Software-Group/linux-ntfs3:
fs/ntfs3: Unify inode corruption marking with _ntfs_bad_inode()
fs/ntfs3: Mark inode as bad as soon as error detected in mi_enum_attr()
ntfs3: Remove an access to page->index
Pull bcachefs fixes from Kent Overstreet:
- second half of a fix for a bug that'd been causing oopses on
filesystems using snapshots with memory pressure (key cache fills for
snaphots btrees are tricky)
- build fix for strange compiler configurations that double stack frame
size
- "journal stuck timeout" now takes into account device latency: this
fixes some spurious warnings, and the main remaining source of SRCU
lock hold time warnings (I'm no longer seeing this in my CI, so any
users still seeing this should definitely ping me)
- fix for slow/hanging unmounts (" Improve journal pin flushing")
- some more tracepoint fixes/improvements, to chase down the "rebalance
isn't making progress" issues
* tag 'bcachefs-2025-01-29' of git://evilpiepirate.org/bcachefs:
bcachefs: Improve trace_move_extent_finish
bcachefs: Fix trace_copygc
bcachefs: Journal writes are now IOPRIO_CLASS_RT
bcachefs: Improve journal pin flushing
bcachefs: fix bch2_btree_node_flags
bcachefs: rebalance, copygc enabled are runtime opts
bcachefs: Improve decompression error messages
bcachefs: bset_blacklisted_journal_seq is now AUTOFIX
bcachefs: "Journal stuck" timeout now takes into account device latency
bcachefs: Reduce stack frame size of __bch2_str_hash_check_key()
bcachefs: Fix btree_trans_peek_key_cache()
Pull soundwire updates from Vinod Koul:
- SoundWire multi lane support to use multiple lanes if supported
- Stream handling of DEPREPARED state
- AMD wake register programming for power off mode
* tag 'soundwire-6.14-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/vkoul/soundwire:
soundwire: amd: clear wake enable register for power off mode
soundwire: generic_bandwidth_allocation: count the bandwidth of active streams only
SoundWire: pass stream to compute_params()
soundwire: generic_bandwidth_allocation: add lane in sdw_group_params
soundwire: generic_bandwidth_allocation: select data lane
soundwire: generic_bandwidth_allocation: check required freq accurately
soundwire: generic_bandwidth_allocation: correct clk_freq check in sdw_select_row_col
Soundwire: generic_bandwidth_allocation: set frame shape on fly
Soundwire: stream: program BUSCLOCK_SCALE
Soundwire: add sdw_slave_get_scale_index helper
soundwire: generic_bandwidth_allocation: skip DEPREPARED streams
soundwire: stream: set DEPREPARED state earlier
soundwire: add lane_used_bandwidth in struct sdw_bus
soundwire: mipi_disco: read lane mapping properties from ACPI
soundwire: add lane field in sdw_port_runtime
soundwire: bus: Move irq mapping cleanup into devres
Pull dmaengine updates from Vinod Koul:
"A bunch of new device support and updates to few drivers, biggest of
them amd ones.
New support:
- TI J722S CSI BCDMA controller support
- Intel idxd Panther Lake family platforms
- Allwinner F1C100s suniv DMA
- Qualcomm QCS615, QCS8300, SM8750, SA8775P GPI dma controller support
- AMD ae4dma controller support and reorganisation of amd driver
Updates:
- Channel page support for Nvidia Tegra210 adma driver
- Freescale support for S32G based platforms
- Yamilfy atmel dma bindings"
* tag 'dmaengine-6.14-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/vkoul/dmaengine: (45 commits)
dmaengine: idxd: Enable Function Level Reset (FLR) for halt
dmaengine: idxd: Refactor halt handler
dmaengine: idxd: Add idxd_device_config_save() and idxd_device_config_restore() helpers
dmaengine: idxd: Binding and unbinding IDXD device and driver
dmaengine: idxd: Add idxd_pci_probe_alloc() helper
dt-bindings: dma: atmel: Convert to json schema
dt-bindings: dma: st-stm32-dmamux: Add description for dma-cell values
dmaengine: qcom: gpi: Add GPI immediate DMA support for SPI protocol
dt-bindings: dma: adi,axi-dmac: deprecate adi,channels node
dt-bindings: dma: adi,axi-dmac: convert to yaml schema
dmaengine: mv_xor: switch to for_each_child_of_node_scoped()
dmaengine: bcm2835-dma: Prevent suspend if DMA channel is busy
dmaengine: tegra210-adma: Support channel page
dt-bindings: dma: Support channel page to nvidia,tegra210-adma
dmaengine: ti: k3-udma: Add support for J722S CSI BCDMA
dt-bindings: dma: ti: k3-bcdma: Add J722S CSI BCDMA
dmaengine: ti: edma: fix OF node reference leaks in edma_driver
dmaengine: ti: edma: make the loop condition simpler in edma_probe()
dmaengine: fsl-edma: read/write multiple registers in cyclic transactions
dmaengine: fsl-edma: add support for S32G based platforms
...
Pull regulator fixes from Mark Brown:
"A couple of fixes that have come in during the merge window: one that
operates the TPS6287x devices more within the design spec and can
prevent current surges when changing voltages and another more trivial
one for error message formatting"
* tag 'regulator-fix-v6.14-merge-window' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator:
regulator: core: Add missing newline character
regulator: TPS6287X: Use min/max uV to get VRANGE
Pull Compute Express Link (CXL) updates from Dave Jiang:
"A tweak to the HMAT output that was acked by Rafael, a prep patch for
CXL type2 devices support that's coming soon, refactoring of the CXL
regblock enumeration code, and a series of patches to update the event
records to CXL spec r3.1:
- Move HMAT printouts to pr_debug()
- Add CXL type2 support to cxl_dvsec_rr_decode() in preparation for
type2 support
- A series that updates CXL event records to spec r3.1 and related
changes
- Refactoring of cxl_find_regblock_instance() to count regblocks"
* tag 'cxl-for-6.14' of git://git.kernel.org/pub/scm/linux/kernel/git/cxl/cxl:
cxl/core/regs: Refactor out functions to count regblocks of given type
cxl/test: Update test code for event records to CXL spec rev 3.1
cxl/events: Update Memory Module Event Record to CXL spec rev 3.1
cxl/events: Update DRAM Event Record to CXL spec rev 3.1
cxl/events: Update General Media Event Record to CXL spec rev 3.1
cxl/events: Add Component Identifier formatting for CXL spec rev 3.1
cxl/events: Update Common Event Record to CXL spec rev 3.1
cxl/pci: Add CXL Type 1/2 support to cxl_dvsec_rr_decode()
ACPI/HMAT: Move HMAT messages to pr_debug()
Pull powerpc fixes from Madhavan Srinivasan:
- Fix to handle PE state in pseries_eeh_get_state()
- Handle unset of tce window if it was never set
Thanks to Narayana Murty N, Ritesh Harjani (IBM), Shivaprasad G Bhat,
and Vaishnavi Bhat.
* tag 'powerpc-6.14-2' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux:
powerpc/pseries/iommu: Don't unset window if it was never set
powerpc/pseries/eeh: Fix get PE state translation
Pull CRC cleanups from Eric Biggers:
"Simplify the kconfig options for controlling which CRC implementations
are built into the kernel, as was requested by Linus.
This means making the option to disable the arch code visible only
when CONFIG_EXPERT=y, and standardizing on a single generic
implementation of CRC32"
* tag 'crc-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ebiggers/linux:
lib/crc32: remove other generic implementations
lib/crc: simplify the kconfig options for CRC implementations
Pull sysctl table constification from Joel Granados:
"All ctl_table declared outside of functions and that remain unmodified
after initialization are const qualified.
This prevents unintended modifications to proc_handler function
pointers by placing them in the .rodata section.
This is a continuation of the tree-wide effort started a few releases
ago with the constification of the ctl_table struct arguments in the
sysctl API done in 78eb4ea25c ("sysctl: treewide: constify the
ctl_table argument of proc_handlers")"
* tag 'constfy-sysctl-6.14-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/sysctl/sysctl:
treewide: const qualify ctl_tables where applicable
Pull fuse updates from Miklos Szeredi:
"Add support for io-uring communication between kernel and userspace
using IORING_OP_URING_CMD (Bernd Schubert). Following features enable
gains in performance compared to the regular interface:
- Allow processing multiple requests with less syscall overhead
- Combine commit of old and fetch of new fuse request
- CPU/NUMA affinity of queues
Patches were reviewed by several people, including Pavel Begunkov,
io-uring co-maintainer"
* tag 'fuse-update-6.14' of git://git.kernel.org/pub/scm/linux/kernel/git/mszeredi/fuse:
fuse: prevent disabling io-uring on active connections
fuse: enable fuse-over-io-uring
fuse: block request allocation until io-uring init is complete
fuse: {io-uring} Prevent mount point hang on fuse-server termination
fuse: Allow to queue bg requests through io-uring
fuse: Allow to queue fg requests through io-uring
fuse: {io-uring} Make fuse_dev_queue_{interrupt,forget} non-static
fuse: {io-uring} Handle teardown of ring entries
fuse: Add io-uring sqe commit and fetch support
fuse: {io-uring} Make hash-list req unique finding functions non-static
fuse: Add fuse-io-uring handling into fuse_copy
fuse: Make fuse_copy non static
fuse: {io-uring} Handle SQEs - register commands
fuse: make args->in_args[0] to be always the header
fuse: Add fuse-io-uring design documentation
fuse: Move request bits
fuse: Move fuse_get_dev to header file
fuse: rename to fuse_dev_end_requests and make non-static
Make the following simplifications to the kconfig options for choosing
CRC implementations for CRC32 and CRC_T10DIF:
1. Make the option to disable the arch-optimized code be visible only
when CONFIG_EXPERT=y.
2. Make a single option control the inclusion of the arch-optimized code
for all enabled CRC variants.
3. Make CRC32_SARWATE (a.k.a. slice-by-1 or byte-by-byte) be the only
generic CRC32 implementation.
The result is there is now just one option, CRC_OPTIMIZATIONS, which is
default y and can be disabled only when CONFIG_EXPERT=y.
Rationale:
1. Enabling the arch-optimized code is nearly always the right choice.
However, people trying to build the tiniest kernel possible would
find some use in disabling it. Anything we add to CRC32 is de facto
unconditional, given that CRC32 gets selected by something in nearly
all kernels. And unfortunately enabling the arch CRC code does not
eliminate the need to build the generic CRC code into the kernel too,
due to CPU feature dependencies. The size of the arch CRC code will
also increase slightly over time as more CRC variants get added and
more implementations targeting different instruction set extensions
get added. Thus, it seems worthwhile to still provide an option to
disable it, but it should be considered an expert-level tweak.
2. Considering the use case described in (1), there doesn't seem to be
sufficient value in making the arch-optimized CRC code be
independently configurable for different CRC variants. Note also
that multiple variants were already grouped together, e.g.
CONFIG_CRC32 actually enables three different variants of CRC32.
3. The bit-by-bit implementation is uselessly slow, whereas slice-by-n
for n=4 and n=8 use tables that are inconveniently large: 4096 bytes
and 8192 bytes respectively, compared to 1024 bytes for n=1. Higher
n gives higher instruction-level parallelism, so higher n easily wins
on traditional microbenchmarks on most CPUs. However, the larger
tables, which are accessed randomly, can be harmful in real-world
situations where the dcache may be cold or useful data may need be
evicted from the dcache. Meanwhile, today most architectures have
much faster CRC32 implementations using dedicated CRC32 instructions
or carryless multiplication instructions anyway, which make the
generic code obsolete in most cases especially on long messages.
Another reason for going with n=1 is that this is already what is
used by all the other CRC variants in the kernel. CRC32 was unique
in having support for larger tables. But as per the above this can
be considered an outdated optimization.
The standardization on slice-by-1 a.k.a. CRC32_SARWATE makes much of
the code in lib/crc32.c unused. A later patch will clean that up.
Link: https://lore.kernel.org/r/20250123212904.118683-2-ebiggers@kernel.org
Reviewed-by: Ard Biesheuvel <ardb@kernel.org>
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Eric Biggers <ebiggers@google.com>
Move the change_cookie and subvol up to avoid two 4 byte holes.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Compiling vmlogrdr with GCC 15 generates this warning:
CC [M] drivers/s390/char/vmlogrdr.o
drivers/s390/char/vmlogrdr.c:126:29: error: initializer-string for array
of ‘char’ is too long [-Werror=unterminated-string-initialization]
126 | { .system_service = "*LOGREC ",
Given that the system_service array intentionally contains a non-null
terminated string use an array initializer, instead of string
initializer to get rid of this warning.
Reviewed-by: Gerald Schaefer <gerald.schaefer@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Alexander Gordeev <agordeev@linux.ibm.com>
Use the internal_name member of vmlogrdr_priv_t to print error messages
instead of the system_service member. The system_service member is not a
string, but a non-null terminated eight byte character array, which
contains the ASCII representation of a z/VM system service.
Reviewed-by: Gerald Schaefer <gerald.schaefer@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Alexander Gordeev <agordeev@linux.ibm.com>
Pull x86 fix from Ingo Molnar:
"Fix a potential early boot crash in SEV-SNP guests, where certain
config and build environment combinations can generate absolute
references to symbols in the early boot code"
* tag 'x86-urgent-2025-01-28' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/sev: Disable jump tables in SEV startup code
Pull NFS client updates from Anna Schumaker:
"New Features:
- Enable using direct IO with localio
- Added localio related tracepoints
Bugfixes:
- Sunrpc fixes for working with a very large cl_tasks list
- Fix a possible buffer overflow in nfs_sysfs_link_rpc_client()
- Fixes for handling reconnections with localio
- Fix how the NFS_FSCACHE kconfig option interacts with NETFS_SUPPORT
- Fix COPY_NOTIFY xdr_buf size calculations
- pNFS/Flexfiles fix for retrying requesting a layout segment for
reads
- Sunrpc fix for retrying on EKEYEXPIRED error when the TGT is
expired
Cleanups:
- Various other nfs & nfsd localio cleanups
- Prepratory patches for async copy improvements that are under
development
- Make OFFLOAD_CANCEL, LAYOUTSTATS, and LAYOUTERR moveable to other
xprts
- Add netns inum and srcaddr to debugfs rpc_xprt info"
* tag 'nfs-for-6.14-1' of git://git.linux-nfs.org/projects/anna/linux-nfs: (28 commits)
SUNRPC: do not retry on EKEYEXPIRED when user TGT ticket expired
sunrpc: add netns inum and srcaddr to debugfs rpc_xprt info
pnfs/flexfiles: retry getting layout segment for reads
NFSv4.2: make LAYOUTSTATS and LAYOUTERROR MOVEABLE
NFSv4.2: mark OFFLOAD_CANCEL MOVEABLE
NFSv4.2: fix COPY_NOTIFY xdr buf size calculation
NFS: Rename struct nfs4_offloadcancel_data
NFS: Fix typo in OFFLOAD_CANCEL comment
NFS: CB_OFFLOAD can return NFS4ERR_DELAY
nfs: Make NFS_FSCACHE select NETFS_SUPPORT instead of depending on it
nfs: fix incorrect error handling in LOCALIO
nfs: probe for LOCALIO when v3 client reconnects to server
nfs: probe for LOCALIO when v4 client reconnects to server
nfs/localio: remove redundant code and simplify LOCALIO enablement
nfs_common: add nfs_localio trace events
nfs_common: track all open nfsd_files per LOCALIO nfs_client
nfs_common: rename nfslocalio nfs_uuid_lock to nfs_uuids_lock
nfsd: nfsd_file_acquire_local no longer returns GC'd nfsd_file
nfsd: rename nfsd_serv_ prefixed methods and variables with nfsd_net_
nfsd: update percpu_ref to manage references on nfsd_net
...
Pull vfio updates from Alex Williamson:
- Extend vfio-pci 8-byte read/write support to include archs defining
CONFIG_GENERIC_IOMAP, such as x86, and remove now extraneous #ifdefs
around 64-bit accessors (Ramesh Thomas)
- Update vfio-pci shadow ROM handling and allow cached ROM from setup
data to be exposed as a functional ROM BAR region when available
(Yunxiang Li)
- Update nvgrace-gpu vfio-pci variant driver for new Grace Blackwell
hardware, conditionalizing the uncached BAR workaround for previous
generation hardware based on the presence of a flag in a new DVSEC
capability, and include a delay during probe for link training to
complete, a new requirement for GB devices (Ankit Agrawal)
* tag 'vfio-v6.14-rc1' of https://github.com/awilliam/linux-vfio:
vfio/nvgrace-gpu: Add GB200 SKU to the devid table
vfio/nvgrace-gpu: Check the HBM training and C2C link status
vfio/nvgrace-gpu: Expose the blackwell device PF BAR1 to the VM
vfio/nvgrace-gpu: Read dvsec register to determine need for uncached resmem
vfio/platform: check the bounds of read/write syscalls
vfio/pci: Expose setup ROM at ROM bar when needed
vfio/pci: Remove shadow ROM specific code paths
vfio/pci: Remove #ifdef iowrite64 and #ifdef ioread64
vfio/pci: Enable iowrite64 and ioread64 for vfio pci
When retpolines and IBT are both disabled, the compiler is free to use
jump tables to optimize switch instructions. However, these are emitted
by Clang as absolute references into .rodata:
jmp *-0x7dfffe90(,%r9,8)
R_X86_64_32S .rodata+0x170
Given that this code will execute before that address in .rodata has even
been mapped, it is guaranteed to crash a SEV-SNP guest in a way that is
difficult to diagnose.
So disable jump tables when building this code. It would be better if we
could attach this annotation to the __head macro but this appears to be
impossible.
Reported-by: Linus Torvalds <torvalds@linux-foundation.org>
Tested-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Link: https://lore.kernel.org/r/20250127114334.1045857-6-ardb+git@google.com
Sphinx reports unreferenced footnote warning pointing to ubd-control
message by Stefan Hajnoczi:
Documentation/block/ublk.rst:336: WARNING: Footnote [#] is not referenced. [ref.footnote]
Drop the footnote to squash above warning.
Signed-off-by: Bagas Sanjaya <bagasdotme@gmail.com>
Fixes: 4093cb5a06 ("ublk_drv: add mechanism for supporting unprivileged ublk device")
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
Link: https://lore.kernel.org/r/20250122143456.68867-3-bagasdotme@gmail.com
Pull driver core and debugfs updates from Greg KH:
"Here is the big set of driver core and debugfs updates for 6.14-rc1.
Included in here is a bunch of driver core, PCI, OF, and platform rust
bindings (all acked by the different subsystem maintainers), hence the
merge conflict with the rust tree, and some driver core api updates to
mark things as const, which will also require some fixups due to new
stuff coming in through other trees in this merge window.
There are also a bunch of debugfs updates from Al, and there is at
least one user that does have a regression with these, but Al is
working on tracking down the fix for it. In my use (and everyone
else's linux-next use), it does not seem like a big issue at the
moment.
Here's a short list of the things in here:
- driver core rust bindings for PCI, platform, OF, and some i/o
functions.
We are almost at the "write a real driver in rust" stage now,
depending on what you want to do.
- misc device rust bindings and a sample driver to show how to use
them
- debugfs cleanups in the fs as well as the users of the fs api for
places where drivers got it wrong or were unnecessarily doing
things in complex ways.
- driver core const work, making more of the api take const * for
different parameters to make the rust bindings easier overall.
- other small fixes and updates
All of these have been in linux-next with all of the aforementioned
merge conflicts, and the one debugfs issue, which looks to be resolved
"soon""
* tag 'driver-core-6.14-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core: (95 commits)
rust: device: Use as_char_ptr() to avoid explicit cast
rust: device: Replace CString with CStr in property_present()
devcoredump: Constify 'struct bin_attribute'
devcoredump: Define 'struct bin_attribute' through macro
rust: device: Add property_present()
saner replacement for debugfs_rename()
orangefs-debugfs: don't mess with ->d_name
octeontx2: don't mess with ->d_parent or ->d_parent->d_name
arm_scmi: don't mess with ->d_parent->d_name
slub: don't mess with ->d_name
sof-client-ipc-flood-test: don't mess with ->d_name
qat: don't mess with ->d_name
xhci: don't mess with ->d_iname
mtu3: don't mess wiht ->d_iname
greybus/camera - stop messing with ->d_iname
mediatek: stop messing with ->d_iname
netdevsim: don't embed file_operations into your structs
b43legacy: make use of debugfs_get_aux()
b43: stop embedding struct file_operations into their objects
carl9170: stop embedding file_operations into their objects
...
Pull stop_machine update from Paul McKenney:
"Move a misplaced call to rcu_momentary_eqs() from multi_cpu_stop() to
ensure that interrupts are disabled as required"
* tag 'stop-machine.2025.01.28a' of git://git.kernel.org/pub/scm/linux/kernel/git/paulmck/linux-rcu:
stop_machine: Fix rcu_momentary_eqs() call in multi_cpu_stop()
Pull CSD-lock update from Paul McKenney:
"Allow runtime modification of the csd_lock_timeout and
panic_on_ipistall module parameters"
* tag 'csd-lock.2025.01.28a' of git://git.kernel.org/pub/scm/linux/kernel/git/paulmck/linux-rcu:
locking/csd-lock: make CSD lock debug tunables writable in /sys
Ritesh Harjani (IBM)
Zhaoyang Huang
Kairui Song
Christopher Obbard
Marco Elver
Nikita Zhandarovich
yangge
Liam R. Howlett
Bruno Faccini
Catalin Marinas
Hamza Mahfooz
Yosry Ahmed
Jan Kiszka
Li Zhijian
Heming Zhao
Hyeonggon Yoo
liuye
Linus Torvalds
Eric Biggers
Christoph Hellwig
Masami Hiramatsu (Google)
Heiko Carstens
Ard Biesheuvel
Bagas Sanjaya