Pull sound fixes from Takashi Iwai:
"A collection of small fixes. It became a bit larger than wished, but
all of them are device-specific small fixes, and it should be still
fairly safe to take at the last minute.
Included are a few quirks and fixes for Intel, AMD, HD-audio, and
USB-audio, as well as a race fix in aloop driver and corrections of
Cirrus firmware kunit test"
* tag 'sound-6.19' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound:
ALSA: hda/realtek: Enable headset mic for Acer Nitro 5
ASoC: fsl_xcvr: fix missing lock in fsl_xcvr_mode_put()
ASoC: dt-bindings: ti,tlv320aic3x: Add compatible string ti,tlv320aic23
ASoC: amd: fix memory leak in acp3x pdm dma ops
ALSA: usb-audio: fix broken logic in snd_audigy2nx_led_update()
ALSA: aloop: Fix racy access at PCM trigger
ASoC: rt1320: fix intermittent no-sound issue
ASoC: SOF: Intel: use hdev->info.link_mask directly
firmware: cs_dsp: rate-limit log messages in KUnit builds
ASoC: amd: yc: Add quirk for HP 200 G2a 16
ASoC: cs42l43: Correct handling of 3-pole jack load detection
ASoC: Intel: sof_es8336: Add DMI quirk for Huawei BOD-WXX9
ASoC: sof_sdw: Add a quirk for Lenovo laptop using sidecar amps with cs42l43
Pull slab fix from Vlastimil Babka:
"A stable fix for memory allocation profiling tag not being cleared
when aborting an allocation due to memcg charge failure (Hao Ge)"
* tag 'slab-for-6.19-rc8-fix' of git://git.kernel.org/pub/scm/linux/kernel/git/vbabka/slab:
mm/slab: Add alloc_tagging_slab_free_hook for memcg_alloc_abort_single
Pull ARM fix from Russell King:
"Just one fix for memset64() on big endian 32-bit ARM systems"
* tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rmk/linux:
ARM: 9468/1: fix memset64() on big-endian
Pull hwmon fixes from Guenter Roeck:
- occ: Mark occ_init_attribute() as __printf to avoid build failure due
to '-Werror=suggest-attribute=format'
- gpio-fan: Allow to stop fans when CONFIG_PM is disabled, and fix
set_rpm() return value
- acpi_power_meter: Fix deadlocks related to acpi_power_meter_notify()
- dell-smm: Add Dell G15 5510 to fan control whitelist
* tag 'hwmon-for-v6.19-final' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging:
hwmon: (occ) Mark occ_init_attribute() as __printf
hwmon: (gpio-fan) Allow to stop FANs when CONFIG_PM is disabled
hwmon: (gpio-fan) Fix set_rpm() return value
hwmon: (acpi_power_meter) Fix deadlocks related to acpi_power_meter_notify()
hwmon: (dell-smm) Add Dell G15 5510 to fan control whitelist
Pull drm fixes from Dave Airlie:
"The usual xe/amdgpu selection, and a couple of misc changes for
gma500, mgag200 and bridge. There is a nouveau revert, and also a set
of changes that fix a regression since we moved to 570 firmware.
Suspend/resume was broken on a bunch of GPUs. The fix looks big, but
it's mostly just refactoring to pass an extra bit down the nouveau
abstractions to the firmware command.
amdgpu:
- MES 11 old firmware compatibility fix
- ASPM fix
- DC LUT fixes
amdkfd:
- Fix possible double deletion of validate list
xe:
- Fix topology query pointer advance
- A couple of kerneldoc fixes
- Disable D3Cold for BMG only on specific platforms
- Fix CFI violation in debugfs access
nouveau:
- Revert adding atomic commit functions as it regresses pre-nv50
- Fix suspend/resume bugs exposed by enabling 570 firmware
gma500:
- Revert a regression caused by vblank changes
mgag200:
- Replace a busy loop with a polling loop to fix that blocking 1 cpu
for 300 ms roughly every 20 minutes
bridge:
- imx8mp-hdmi-pa: Use runtime pm to fix a bug in channel ordering"
* tag 'drm-fixes-2026-02-06' of https://gitlab.freedesktop.org/drm/kernel:
drm/xe/guc: Fix CFI violation in debugfs access.
drm/bridge: imx8mp-hdmi-pai: enable PM runtime
drm/xe/pm: Disable D3Cold for BMG only on specific platforms
drm/xe: Fix kerneldoc for xe_tlb_inval_job_alloc_dep
drm/xe: Fix kerneldoc for xe_gt_tlb_inval_init_early
drm/xe: Fix kerneldoc for xe_migrate_exec_queue
drm/xe/query: Fix topology query pointer advance
drm/mgag200: fix mgag200_bmc_stop_scanout()
nouveau/gsp: fix suspend/resume regression on r570 firmware
nouveau: add a third state to the fini handler.
nouveau/gsp: use rpc sequence numbers properly.
drm/amdgpu: Fix double deletion of validate_list
drm/amd/display: remove assert around dpp_base replacement
drm/amd/display: extend delta clamping logic to CM3 LUT helper
drm/amd/display: fix wrong color value mapping on MCM shaper LUT
Revert "drm/amd: Check if ASPM is enabled from PCIe subsystem"
drm/amd: Set minimum version for set_hw_resource_1 on gfx11 to 0x52
Revert "drm/gma500: use drm_crtc_vblank_crtc()"
Revert "drm/nouveau/disp: Set drm_mode_config_funcs.atomic_(check|commit)"
drm-misc-fixes for v6.19 final:
nouveau
-------
Revert adding atomic commit functions as it regresses pre-nv50.
Fix bugs exposed by enabling 570 firmware.
gma500
------
Revert a regression caused by vblank changes.
mgag200
-------
Replace a busy loop with a polling loop to fix that blocking 1 cpu for 300 ms roughly every 20 minutes.
bridge
------
imx8mp-hdmi-pa: Use runtime pm to fix a bug in channel ordering.
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Link: https://patch.msgid.link/c0077ea5-faeb-4b0c-bd4a-ea2384d6dc0c@linux.intel.com
Pull block fixes from Jens Axboe:
- Revert of a change for loop, which caused regressions for some users
(Actually revert of two commits, where one is just an existing fix
for the offending commit)
- NVMe pull via Keith:
- Fix NULL pointer access setting up dma mappings
- Fix invalid memory access from malformed TCP PDU
* tag 'block-6.19-20260205' of git://git.kernel.org/pub/scm/linux/kernel/git/axboe/linux:
loop: revert exclusive opener loop status change
nvmet-tcp: add bounds checks in nvmet_tcp_build_pdu_iovec
nvme-pci: handle changing device dma map requirements
Pull io_uring fixes from Jens Axboe:
- Two small fixes for zcrx
- Two small fixes for fdinfo - one is just killing a superflous newline
* tag 'io_uring-6.19-20260205' of git://git.kernel.org/pub/scm/linux/kernel/git/axboe/linux:
io_uring/fdinfo: be a bit nicer when looping a lot of SQEs/CQEs
io_uring/fdinfo: kill unnecessary newline feed in CQE32 printing
io_uring/zcrx: fix rq flush locking
io_uring/zcrx: fix page array leak
Pull dcache fixes from Al Viro:
"A couple of regression fixes for the tree-in-dcache series this cycle"
* tag 'pull-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
functionfs: use spinlock for FFS_DEACTIVATED/FFS_CLOSING transitions
rust_binderfs: fix a dentry leak
When all files are closed, functionfs needs ffs_data_reset() to be
done before any further opens are allowed.
During that time we have ffs->state set to FFS_CLOSING; that makes
->open() fail with -EBUSY. Once ffs_data_reset() is done, it
switches state (to FFS_READ_DESCRIPTORS) indicating that opening
that thing is allowed again. There's a couple of additional twists:
* mounting with -o no_disconnect delays ffs_data_reset()
from doing that at the final ->release() to the first subsequent
open(). That's indicated by ffs->state set to FFS_DEACTIVATED;
if open() sees that, it immediately switches to FFS_CLOSING and
proceeds with doing ffs_data_reset() before returning to userland.
* a couple of usb callbacks need to force the delayed
transition; unfortunately, they are done in locking environment
that does not allow blocking and ffs_data_reset() can block.
As the result, if these callbacks see FFS_DEACTIVATED, they change
state to FFS_CLOSING and use schedule_work() to get ffs_data_reset()
executed asynchronously.
Unfortunately, the locking is rather insufficient. A fix attempted
in e5bf5ee266 ("functionfs: fix the open/removal races") had closed
a bunch of UAF, but it didn't do anything to the callbacks, lacked
barriers in transition from FFS_CLOSING to FFS_READ_DESCRIPTORS
_and_ it had been too heavy-handed in open()/open() serialization -
I've used ffs->mutex for that, and it's being held over actual IO on
ep0, complete with copy_from_user(), etc.
Even more unfortunately, the userland side is apparently racy enough
to have the resulting timing changes (no failures, just a delayed
return of open(2)) disrupt the things quite badly. Userland bugs
or not, it's a clear regression that needs to be dealt with.
Solution is to use a spinlock for serializing these state checks and
transitions - unlike ffs->mutex it can be taken in these callbacks
and it doesn't disrupt the timings in open().
We could introduce a new spinlock, but it's easier to use the one
that is already there (ffs->eps_lock) instead - the locking
environment is safe for it in all affected places.
Since now it is held over all places that alter or check the
open count (ffs->opened), there's no need to keep that atomic_t -
int would serve just fine and it's simpler that way.
Fixes: e5bf5ee266 ("functionfs: fix the open/removal races")
Fixes: 18d6b32fca ("usb: gadget: f_fs: add "no_disconnect" mode") # v4.0
Tested-by: Samuel Wu <wusamuel@google.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Parallel to binderfs patches - 02da8d2c09 "binderfs_binder_ctl_create():
kill a bogus check" and the bit of b89aa54482 "convert binderfs" that
got lost when making 4433d8e25d "convert rust_binderfs"; the former is
a cleanup, the latter is about marking /binder-control persistent, so that
it would be taken out on umount.
Fixes: 4433d8e25d ("convert rust_binderfs")
Acked-by: Alice Ryhl <aliceryhl@google.com>
Acked-by: Christian Brauner <brauner@kernel.org>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
syzbot reported a kernel BUG in fib6_add_rt2node() when adding an IPv6
route. [0]
Commit f72514b3c5 ("ipv6: clear RA flags when adding a static
route") introduced logic to clear RTF_ADDRCONF from existing routes
when a static route with the same nexthop is added. However, this
causes a problem when the existing route has a gateway.
When RTF_ADDRCONF is cleared from a route that has a gateway, that
route becomes eligible for ECMP, i.e. rt6_qualify_for_ecmp() returns
true. The issue is that this route was never added to the
fib6_siblings list.
This leads to a mismatch between the following counts:
- The sibling count computed by iterating fib6_next chain, which
includes the newly ECMP-eligible route
- The actual siblings in fib6_siblings list, which does not include
that route
When a subsequent ECMP route is added, fib6_add_rt2node() hits
BUG_ON(sibling->fib6_nsiblings != rt->fib6_nsiblings) because the
counts don't match.
Fix this by only clearing RTF_ADDRCONF when the existing route does
not have a gateway. Routes without a gateway cannot qualify for ECMP
anyway (rt6_qualify_for_ecmp() requires fib_nh_gw_family), so clearing
RTF_ADDRCONF on them is safe and matches the original intent of the
commit.
[0]:
kernel BUG at net/ipv6/ip6_fib.c:1217!
Oops: invalid opcode: 0000 [#1] SMP KASAN PTI
CPU: 0 UID: 0 PID: 6010 Comm: syz.0.17 Not tainted syzkaller #0 PREEMPT(full)
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 10/25/2025
RIP: 0010:fib6_add_rt2node+0x3433/0x3470 net/ipv6/ip6_fib.c:1217
[...]
Call Trace:
<TASK>
fib6_add+0x8da/0x18a0 net/ipv6/ip6_fib.c:1532
__ip6_ins_rt net/ipv6/route.c:1351 [inline]
ip6_route_add+0xde/0x1b0 net/ipv6/route.c:3946
ipv6_route_ioctl+0x35c/0x480 net/ipv6/route.c:4571
inet6_ioctl+0x219/0x280 net/ipv6/af_inet6.c:577
sock_do_ioctl+0xdc/0x300 net/socket.c:1245
sock_ioctl+0x576/0x790 net/socket.c:1366
vfs_ioctl fs/ioctl.c:51 [inline]
__do_sys_ioctl fs/ioctl.c:597 [inline]
__se_sys_ioctl+0xfc/0x170 fs/ioctl.c:583
do_syscall_x64 arch/x86/entry/syscall_64.c:63 [inline]
do_syscall_64+0xfa/0xf80 arch/x86/entry/syscall_64.c:94
entry_SYSCALL_64_after_hwframe+0x77/0x7f
Fixes: f72514b3c5 ("ipv6: clear RA flags when adding a static route")
Reported-by: syzbot+cb809def1baaac68ab92@syzkaller.appspotmail.com
Closes: https://syzkaller.appspot.com/bug?extid=cb809def1baaac68ab92
Tested-by: syzbot+cb809def1baaac68ab92@syzkaller.appspotmail.com
Signed-off-by: Shigeru Yoshida <syoshida@redhat.com>
Reviewed-by: Fernando Fernandez Mancera <fmancera@suse.de>
Link: https://patch.msgid.link/20260204095837.1285552-1-syoshida@redhat.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Florian Westphal says:
====================
netfilter: update for net
This is one last-minute crash fix for nf_tables, from Andrew Fasano:
Logical check is inverted, this makes kernel fail to correctly undo
the transaction, leading to a use-after-free.
* tag 'nf-26-02-05' of https://git.kernel.org/pub/scm/linux/kernel/git/netfilter/nf:
netfilter: nf_tables: fix inverted genmask check in nft_map_catchall_activate()
====================
Link: https://patch.msgid.link/20260205074450.3187-1-fw@strlen.de
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
This commit effectively reverts the following two commits:
2704024d83 ("loop: add missing bd_abort_claiming in loop_set_status")
08e136ebd1 ("loop: don't change loop device under exclusive opener in loop_set_status")
as there are reports of them causing issues with unmounting. As we're
close to the 6.19 kernel release and the original author hasn't taken a
closer look at this yet, revert them for release.
Reported-by: nokangaroo <nokangaroo@aon.at>
Link: https://lore.kernel.org/all/62de4453-17e8-47f6-a10b-39bf5a49fdee@leemhuis.info/
Signed-off-by: Jens Axboe <axboe@kernel.dk>
nvmet_tcp_build_pdu_iovec() could walk past cmd->req.sg when a PDU
length or offset exceeds sg_cnt and then use bogus sg->length/offset
values, leading to _copy_to_iter() GPF/KASAN. Guard sg_idx, remaining
entries, and sg->length/offset before building the bvec.
Fixes: 872d26a391 ("nvmet-tcp: add NVMe over TCP target driver")
Signed-off-by: YunJe Shin <ioerts@kookmin.ac.kr>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Reviewed-by: Joonkyo Jung <joonkyoj@yonsei.ac.kr>
Signed-off-by: Keith Busch <kbusch@kernel.org>
The initial state of dma_needs_unmap may be false, but change to true
while mapping the data iterator. Enabling swiotlb is one such case that
can change the result. The nvme driver needs to save the mapped dma
vectors to be unmapped later, so allocate as needed during iteration
rather than assume it was always allocated at the beginning. This fixes
a NULL dereference from accessing an uninitialized dma_vecs when the
device dma unmapping requirements change mid-iteration.
Fixes: b8b7570a7e ("nvme-pci: fix dma unmapping when using PRPs and not using the IOVA mapping")
Link: https://lore.kernel.org/linux-nvme/20260202125738.1194899-1-pradeep.pragallapati@oss.qualcomm.com/
Reported-by: Pradeep P V K <pradeep.pragallapati@oss.qualcomm.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Keith Busch <kbusch@kernel.org>
There is an audio channel shift issue with multi channel case - the
channel order is correct for the first run, but the channel order is
shifted for the second run. The fix method is to reset the PAI interface
at the end of playback.
The reset can be handled by PM runtime, so enable PM runtime.
Fixes: 0205fae632 ("drm/bridge: imx: add driver for HDMI TX Parallel Audio Interface")
Signed-off-by: Shengjiu Wang <shengjiu.wang@nxp.com>
Reviewed-by: Liu Ying <victor.liu@nxp.com>
Signed-off-by: Liu Ying <victor.liu@nxp.com>
Link: https://lore.kernel.org/r/20260130080910.3532724-1-shengjiu.wang@nxp.com
nft_map_catchall_activate() has an inverted element activity check
compared to its non-catchall counterpart nft_mapelem_activate() and
compared to what is logically required.
nft_map_catchall_activate() is called from the abort path to re-activate
catchall map elements that were deactivated during a failed transaction.
It should skip elements that are already active (they don't need
re-activation) and process elements that are inactive (they need to be
restored). Instead, the current code does the opposite: it skips inactive
elements and processes active ones.
Compare the non-catchall activate callback, which is correct:
nft_mapelem_activate():
if (nft_set_elem_active(ext, iter->genmask))
return 0; /* skip active, process inactive */
With the buggy catchall version:
nft_map_catchall_activate():
if (!nft_set_elem_active(ext, genmask))
continue; /* skip inactive, process active */
The consequence is that when a DELSET operation is aborted,
nft_setelem_data_activate() is never called for the catchall element.
For NFT_GOTO verdict elements, this means nft_data_hold() is never
called to restore the chain->use reference count. Each abort cycle
permanently decrements chain->use. Once chain->use reaches zero,
DELCHAIN succeeds and frees the chain while catchall verdict elements
still reference it, resulting in a use-after-free.
This is exploitable for local privilege escalation from an unprivileged
user via user namespaces + nftables on distributions that enable
CONFIG_USER_NS and CONFIG_NF_TABLES.
Fix by removing the negation so the check matches nft_mapelem_activate():
skip active elements, process inactive ones.
Fixes: 628bd3e49c ("netfilter: nf_tables: drop map element references from preparation phase")
Signed-off-by: Andrew Fasano <andrew.fasano@nist.gov>
Signed-off-by: Florian Westphal <fw@strlen.de>
Pull misc fixes from Andrew Morton:
"Five hotfixes. Two are cc:stable, two are for MM.
All are singletons - please see the changelogs for details"
* tag 'mm-hotfixes-stable-2026-02-04-15-55' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm:
Documentation: document liveupdate cmdline parameter
mm, shmem: prevent infinite loop on truncate race
mailmap: update Alexander Mikhalitsyn's emails
liveupdate: luo_file: do not clear serialized_data on unfreeze
x86/kfence: fix booting on 32bit non-PAE systems
Pull TSM (TEE security Manager) fixes from Dan Williams:
"The largest change is reverting part of an ABI that never shipped in a
released kernel (Documentation/ABI/testing/sysfs-class-tsm). The fix /
replacement for that is too large to squeeze in at this late date.
The rest is a collection of small fixups:
- Fix multiple streams per host bridge for SEV-TIO
- Drop the TSM ABI for reporting IDE streams (to be replaced)
- Fix virtual function enumeration
- Fix reserved stream ID initialization
- Fix unused variable compiler warning"
* tag 'tsm-fixes-for-6.19' of git://git.kernel.org/pub/scm/linux/kernel/git/devsec/tsm:
crypto/ccp: Allow multiple streams on the same root bridge
crypto/ccp: Use PCI bridge defaults for IDE
coco/tsm: Remove unused variable tsm_rwsem
PCI/IDE: Fix reading a wrong reg for unused sel stream initialization
PCI/IDE: Fix off by one error calculating VF RID range
Revert "PCI/TSM: Report active IDE streams"
Pull sched_ext fix from Tejun Heo:
- Fix race where sched_class operations (sched_setscheduler() and
friends) could be invoked on dead tasks after sched_ext_dead()
already ran, causing invalid SCX task state transitions and NULL
pointer dereferences.
This was a regression from the cgroup exit ordering fix which
moved sched_ext_free() to finish_task_switch().
* tag 'sched_ext-for-6.19-rc8-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/sched_ext:
sched_ext: Short-circuit sched_class operations on dead tasks
This is a printf-style function, which gcc -Werror=suggest-attribute=format
correctly points out:
drivers/hwmon/occ/common.c: In function 'occ_init_attribute':
drivers/hwmon/occ/common.c:761:9: error: function 'occ_init_attribute' might be a candidate for 'gnu_printf' format attribute [-Werror=suggest-attribute=format]
Add the attribute to avoid this warning and ensure any incorrect
format strings are detected here.
Fixes: 744c2fe950 ("hwmon: (occ) Rework attribute registration for stack usage")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Link: https://lore.kernel.org/r/20260203163440.2674340-1-arnd@kernel.org
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
7900aa699c ("sched_ext: Fix cgroup exit ordering by moving sched_ext_free()
to finish_task_switch()") moved sched_ext_free() to finish_task_switch() and
renamed it to sched_ext_dead() to fix cgroup exit ordering issues. However,
this created a race window where certain sched_class ops may be invoked on
dead tasks leading to failures - e.g. sched_setscheduler() may try to switch a
task which finished sched_ext_dead() back into SCX triggering invalid SCX task
state transitions.
Add task_dead_and_done() which tests whether a task is TASK_DEAD and has
completed its final context switch, and use it to short-circuit sched_class
operations which may be called on dead tasks.
Fixes: 7900aa699c ("sched_ext: Fix cgroup exit ordering by moving sched_ext_free() to finish_task_switch()")
Reported-by: Andrea Righi <arighi@nvidia.com>
Link: http://lkml.kernel.org/r/20260202151341.796959-1-arighi@nvidia.com
Reviewed-by: Andrea Righi <arighi@nvidia.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
Pull KVM fixes from Paolo Bonzini:
- Fix a bug where AVIC is incorrectly inhibited when running with
x2AVIC disabled via module param (or on a system without x2AVIC)
- Fix a dangling device posted IRQs bug by explicitly checking if the
irqfd is still active (on the list) when handling an eventfd signal,
instead of zeroing the irqfd's routing information when the irqfd is
deassigned.
Zeroing the irqfd's routing info causes arm64 and x86's to not
disable posting for the IRQ (kvm_arch_irq_bypass_del_producer() looks
for an MSI), incorrectly leaving the IRQ in posted mode (and leading
to use-after-free and memory leaks on AMD in particular).
This is both the most pressing and scariest, but it's been in -next
for a while.
- Disable FORTIFY_SOURCE for KVM selftests to prevent the compiler from
generating calls to the checked versions of memset() and friends,
which leads to unexpected page faults in guest code due e.g.
__memset_chk@plt not being resolved.
- Explicitly configure the supported XSS capabilities from within
{svm,vmx}_set_cpu_caps() to fix a bug where VMX will compute the
reference VMCS configuration with SHSTK and IBT enabled, but then
compute each CPUs local config with SHSTK and IBT disabled if not all
CET xfeatures are enabled, e.g. if the kernel is built with
X86_KERNEL_IBT=n.
The mismatch in features results in differing nVMX setting, and
ultimately causes kvm-intel.ko to refuse to load with nested=1.
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm:
KVM: x86: Explicitly configure supported XSS from {svm,vmx}_set_cpu_caps()
KVM: selftests: Add -U_FORTIFY_SOURCE to avoid some unpredictable test failures
KVM: x86: Assert that non-MSI doesn't have bypass vCPU when deleting producer
KVM: Don't clobber irqfd routing type when deassigning irqfd
KVM: SVM: Check vCPU ID against max x2AVIC ID if and only if x2AVIC is enabled
Final KVM fixes for 6.19:
- Fix a bug where AVIC is incorrectly inhibited when running with x2AVIC
disabled via module param (or on a system without x2AVIC).
- Fix a dangling device posted IRQs bug by explicitly checking if the irqfd is
still active (on the list) when handling an eventfd signal, instead of
zeroing the irqfd's routing information when the irqfd is deassigned.
Zeroing the irqfd's routing info causes arm64 and x86's to not disable
posting for the IRQ (kvm_arch_irq_bypass_del_producer() looks for an MSI),
incorrectly leaving the IRQ in posted mode (and leading to use-after-free
and memory leaks on AMD in particular).
This is both the most pressing and scariest, but it's been in -next for
a while.
- Disable FORTIFY_SOURCE for KVM selftests to prevent the compiler from
generating calls to the checked versions of memset() and friends, which
leads to unexpected page faults in guest code due e.g. __memset_chk@plt
not being resolved.
- Explicitly configure the support XSS from within {svm,vmx}_set_cpu_caps() to
fix a bug where VMX will compute the reference VMCS configuration with SHSTK
and IBT enabled, but then compute each CPUs local config with SHSTK and IBT
disabled if not all CET xfeatures are enabled, e.g. if the kernel is built
with X86_KERNEL_IBT=n. The mismatch in features results in differing nVMX
setting, and ultimately causes kvm-intel.ko to refuse to load with nested=1.
Pull SoC fixes from Arnd Bergmann:
"Shawn Guo is moving on from maintaining the NXP i.MX platform and
hands over to Frank Li. Shawn has maintained the platform for 15 years
after initially upstreaming support for i.MX6 and i.MX23/28, and his
work has helped make this the most important industrial embedded Linux
platform. Roughly one out of five devicetree files in mainline kernels
are for the wider i.MX platform. Many thanks to Shawn for the taking
care of the platform all these years!
There are also two additional updates for the MAINTAINERS file, and a
fix for error handling in the qualcomm smem driver"
* tag 'soc-fixes-6.19-3' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc:
MAINTAINERS: Change Sudeep Holla's email address
MAINTAINERS: Add myself as maintainer of hisi_soc_hha
soc: qcom: smem: fix qcom_smem_is_available and check if __smem is valid
MAINTAINERS: Replace Shawn with Frank as i.MX platform maintainer
ASoC: Fixes for v6.19
A bunch more small fixes here, plus some more of the constant stream of
quirks. The most notable change here is Richard's change to the cs_dsp
code for the KUnit tests which is relatively large, mostly due to
boilerplate. The tests were triggering large numbers of error messages
as part of verifying that problems with input data are appropriately
detected which in turn caused runtime issues for the framework due to
the performance impact of pushing the logging out, while the logging is
valuable in normal operation it's basically useless while doing tests
designed to trigger it so rate limiting is an appropriate fix.
fsl_xcvr_activate_ctl() has
lockdep_assert_held(&card->snd_card->controls_rwsem),
but fsl_xcvr_mode_put() calls it without acquiring this lock.
Other callers of fsl_xcvr_activate_ctl() in fsl_xcvr_startup() and
fsl_xcvr_shutdown() properly acquire the lock with down_read()/up_read().
Add the missing down_read()/up_read() calls around fsl_xcvr_activate_ctl()
in fsl_xcvr_mode_put() to fix the lockdep assertion and prevent potential
race conditions when multiple userspace threads access the control.
Signed-off-by: Ziyi Guo <n7l8m4@u.northwestern.edu>
Link: https://patch.msgid.link/20260202174112.2018402-1-n7l8m4@u.northwestern.edu
Signed-off-by: Mark Brown <broonie@kernel.org>
The mgag200_bmc_stop_scanout() function is called by the .atomic_disable()
handler for the MGA G200 VGA BMC encoder. This function performs a few
register writes to inform the BMC of an upcoming mode change, and then
polls to wait until the BMC actually stops.
The polling is implemented using a busy loop with udelay() and an iteration
timeout of 300, resulting in the function blocking for 300 milliseconds.
The function gets called ultimately by the output_poll_execute work thread
for the DRM output change polling thread of the mgag200 driver:
kworker/0:0-mm_ 3528 [000] 4555.315364:
ffffffffaa0e25b3 delay_halt.part.0+0x33
ffffffffc03f6188 mgag200_bmc_stop_scanout+0x178
ffffffffc087ae7a disable_outputs+0x12a
ffffffffc087c12a drm_atomic_helper_commit_tail+0x1a
ffffffffc03fa7b6 mgag200_mode_config_helper_atomic_commit_tail+0x26
ffffffffc087c9c1 commit_tail+0x91
ffffffffc087d51b drm_atomic_helper_commit+0x11b
ffffffffc0509694 drm_atomic_commit+0xa4
ffffffffc05105e8 drm_client_modeset_commit_atomic+0x1e8
ffffffffc0510ce6 drm_client_modeset_commit_locked+0x56
ffffffffc0510e24 drm_client_modeset_commit+0x24
ffffffffc088a743 __drm_fb_helper_restore_fbdev_mode_unlocked+0x93
ffffffffc088a683 drm_fb_helper_hotplug_event+0xe3
ffffffffc050f8aa drm_client_dev_hotplug+0x9a
ffffffffc088555a output_poll_execute+0x29a
ffffffffa9b35924 process_one_work+0x194
ffffffffa9b364ee worker_thread+0x2fe
ffffffffa9b3ecad kthread+0xdd
ffffffffa9a08549 ret_from_fork+0x29
On a server running ptp4l with the mgag200 driver loaded, we found that
ptp4l would sometimes get blocked from execution because of this busy
waiting loop.
Every so often, approximately once every 20 minutes -- though with large
variance -- the output_poll_execute() thread would detect some sort of
change that required performing a hotplug event which results in attempting
to stop the BMC scanout, resulting in a 300msec delay on one CPU.
On this system, ptp4l was pinned to a single CPU. When the
output_poll_execute() thread ran on that CPU, it blocked ptp4l from
executing for its 300 millisecond duration.
This resulted in PTP service disruptions such as failure to send a SYNC
message on time, failure to handle ANNOUNCE messages on time, and clock
check warnings from the application. All of this despite the application
being configured with FIFO_RT and a higher priority than the background
workqueue tasks. (However, note that the kernel did not use
CONFIG_PREEMPT...)
It is unclear if the event is due to a faulty VGA connection, another bug,
or actual events causing a change in the connection. At least on the system
under test it is not a one-time event and consistently causes disruption to
the time sensitive applications.
The function has some helpful comments explaining what steps it is
attempting to take. In particular, step 3a and 3b are explained as such:
3a - The third step is to verify if there is an active scan. We are
waiting on a 0 on remhsyncsts (<XSPAREREG<0>.
3b - This step occurs only if the remove is actually scanning. We are
waiting for the end of the frame which is a 1 on remvsyncsts
(<XSPAREREG<1>).
The actual steps 3a and 3b are implemented as while loops with a
non-sleeping udelay(). The first step iterates while the tmp value at
position 0 is *not* set. That is, it keeps iterating as long as the bit is
zero. If the bit is already 0 (because there is no active scan), it will
iterate the entire 300 attempts which wastes 300 milliseconds in total.
This is opposite of what the description claims.
The step 3b logic only executes if we do not iterate over the entire 300
attempts in the first loop. If it does trigger, it is trying to check and
wait for a 1 on the remvsyncsts. However, again the condition is actually
inverted and it will loop as long as the bit is 1, stopping once it hits
zero (rather than the explained attempt to wait until we see a 1).
Worse, both loops are implemented using non-sleeping waits which spin
instead of allowing the scheduler to run other processes. If the kernel is
not configured to allow arbitrary preemption, it will waste valuable CPU
time doing nothing.
There does not appear to be any documentation for the BMC register
interface, beyond what is in the comments here. It seems more probable that
the comment here is correct and the implementation accidentally got
inverted from the intended logic.
Reading through other DRM driver implementations, it does not appear that
the .atomic_enable or .atomic_disable handlers need to delay instead of
sleep. For example, the ast_astdp_encoder_helper_atomic_disable() function
calls ast_dp_set_phy_sleep() which uses msleep(). The "atomic" in the name
is referring to the atomic modesetting support, which is the support to
enable atomic configuration from userspace, and not to the "atomic context"
of the kernel. There is no reason to use udelay() here if a sleep would be
sufficient.
Replace the while loops with a read_poll_timeout() based implementation
that will sleep between iterations, and which stops polling once the
condition is met (instead of looping as long as the condition is met). This
aligns with the commented behavior and avoids blocking on the CPU while
doing nothing.
Note the RREG_DAC is implemented using a statement expression to allow
working properly with the read_poll_timeout family of functions. The other
RREG_<TYPE> macros ought to be cleaned up to have better semantics, and
several places in the mgag200 driver could make use of RREG_DAC or similar
RREG_* macros should likely be cleaned up for better semantics as well, but
that task has been left as a future cleanup for a non-bugfix.
Fixes: 414c453106 ("mgag200: initial g200se driver (v2)")
Suggested-by: Thomas Zimmermann <tzimmermann@suse.de>
Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
Reviewed-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Jocelyn Falempe <jfalempe@redhat.com>
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://patch.msgid.link/20260202-jk-mgag200-fix-bad-udelay-v2-1-ce1e9665987d@intel.com
Kevin Hao says:
====================
net: cpsw: Execute ndo_set_rx_mode callback in a work queue
These two patches resolve an RTNL assertion call trace issue
in both the legacy and new cpsw drivers.
====================
Link: https://patch.msgid.link/20260203-bbb-v5-0-ea0ea217a85c@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Commit 1767bb2d47 ("ipv6: mcast: Don't hold RTNL for
IPV6_ADD_MEMBERSHIP and MCAST_JOIN_GROUP.") removed the RTNL lock for
IPV6_ADD_MEMBERSHIP and MCAST_JOIN_GROUP operations. However, this
change triggered the following call trace on my BeagleBone Black board:
WARNING: net/8021q/vlan_core.c:236 at vlan_for_each+0x120/0x124, CPU#0: rpcbind/481
RTNL: assertion failed at net/8021q/vlan_core.c (236)
Modules linked in:
CPU: 0 UID: 997 PID: 481 Comm: rpcbind Not tainted 6.19.0-rc7-next-20260130-yocto-standard+ #35 PREEMPT
Hardware name: Generic AM33XX (Flattened Device Tree)
Call trace:
unwind_backtrace from show_stack+0x28/0x2c
show_stack from dump_stack_lvl+0x30/0x38
dump_stack_lvl from __warn+0xb8/0x11c
__warn from warn_slowpath_fmt+0x130/0x194
warn_slowpath_fmt from vlan_for_each+0x120/0x124
vlan_for_each from cpsw_add_mc_addr+0x54/0x98
cpsw_add_mc_addr from __hw_addr_ref_sync_dev+0xc4/0xec
__hw_addr_ref_sync_dev from __dev_mc_add+0x78/0x88
__dev_mc_add from igmp6_group_added+0x84/0xec
igmp6_group_added from __ipv6_dev_mc_inc+0x1fc/0x2f0
__ipv6_dev_mc_inc from __ipv6_sock_mc_join+0x124/0x1b4
__ipv6_sock_mc_join from do_ipv6_setsockopt+0x84c/0x1168
do_ipv6_setsockopt from ipv6_setsockopt+0x88/0xc8
ipv6_setsockopt from do_sock_setsockopt+0xe8/0x19c
do_sock_setsockopt from __sys_setsockopt+0x84/0xac
__sys_setsockopt from ret_fast_syscall+0x0/0x54
This trace occurs because vlan_for_each() is called within
cpsw_ndo_set_rx_mode(), which expects the RTNL lock to be held.
Since modifying vlan_for_each() to operate without the RTNL lock is not
straightforward, and because ndo_set_rx_mode() is invoked both with and
without the RTNL lock across different code paths, simply adding
rtnl_lock() in cpsw_ndo_set_rx_mode() is not a viable solution.
To resolve this issue, we opt to execute the actual processing within
a work queue, following the approach used by the icssg-prueth driver.
Please note: To reproduce this issue, I manually reverted the changes to
am335x-bone-common.dtsi from commit c477358e66 ("ARM: dts: am335x-bone:
switch to new cpsw switch drv") in order to revert to the legacy cpsw
driver.
Fixes: 1767bb2d47 ("ipv6: mcast: Don't hold RTNL for IPV6_ADD_MEMBERSHIP and MCAST_JOIN_GROUP.")
Signed-off-by: Kevin Hao <haokexin@gmail.com>
Cc: stable@vger.kernel.org
Link: https://patch.msgid.link/20260203-bbb-v5-2-ea0ea217a85c@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Commit 1767bb2d47 ("ipv6: mcast: Don't hold RTNL for
IPV6_ADD_MEMBERSHIP and MCAST_JOIN_GROUP.") removed the RTNL lock for
IPV6_ADD_MEMBERSHIP and MCAST_JOIN_GROUP operations. However, this
change triggered the following call trace on my BeagleBone Black board:
WARNING: net/8021q/vlan_core.c:236 at vlan_for_each+0x120/0x124, CPU#0: rpcbind/496
RTNL: assertion failed at net/8021q/vlan_core.c (236)
Modules linked in:
CPU: 0 UID: 997 PID: 496 Comm: rpcbind Not tainted 6.19.0-rc6-next-20260122-yocto-standard+ #8 PREEMPT
Hardware name: Generic AM33XX (Flattened Device Tree)
Call trace:
unwind_backtrace from show_stack+0x28/0x2c
show_stack from dump_stack_lvl+0x30/0x38
dump_stack_lvl from __warn+0xb8/0x11c
__warn from warn_slowpath_fmt+0x130/0x194
warn_slowpath_fmt from vlan_for_each+0x120/0x124
vlan_for_each from cpsw_add_mc_addr+0x54/0xd8
cpsw_add_mc_addr from __hw_addr_ref_sync_dev+0xc4/0xec
__hw_addr_ref_sync_dev from __dev_mc_add+0x78/0x88
__dev_mc_add from igmp6_group_added+0x84/0xec
igmp6_group_added from __ipv6_dev_mc_inc+0x1fc/0x2f0
__ipv6_dev_mc_inc from __ipv6_sock_mc_join+0x124/0x1b4
__ipv6_sock_mc_join from do_ipv6_setsockopt+0x84c/0x1168
do_ipv6_setsockopt from ipv6_setsockopt+0x88/0xc8
ipv6_setsockopt from do_sock_setsockopt+0xe8/0x19c
do_sock_setsockopt from __sys_setsockopt+0x84/0xac
__sys_setsockopt from ret_fast_syscall+0x0/0x5
This trace occurs because vlan_for_each() is called within
cpsw_ndo_set_rx_mode(), which expects the RTNL lock to be held.
Since modifying vlan_for_each() to operate without the RTNL lock is not
straightforward, and because ndo_set_rx_mode() is invoked both with and
without the RTNL lock across different code paths, simply adding
rtnl_lock() in cpsw_ndo_set_rx_mode() is not a viable solution.
To resolve this issue, we opt to execute the actual processing within
a work queue, following the approach used by the icssg-prueth driver.
Fixes: 1767bb2d47 ("ipv6: mcast: Don't hold RTNL for IPV6_ADD_MEMBERSHIP and MCAST_JOIN_GROUP.")
Signed-off-by: Kevin Hao <haokexin@gmail.com>
Cc: stable@vger.kernel.org
Link: https://patch.msgid.link/20260203-bbb-v5-1-ea0ea217a85c@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Max Yuan says:
====================
gve: Stats reporting fixes
This series addresses two issues related to statistics in the gve driver.
The first patch fixes a memory corruption issue that occurs when resizing
the stats region during queue count changes. By allocating the maximum
possible size upfront and aligning offset calculations with the NIC,
we ensure stability and accuracy across reconfigurations.
The second patch fixes the 'rx_dropped' counter by removing allocation
failures and incorporating XDP transmit and redirect errors to provide
a more accurate representation of dropped packets.
====================
Link: https://patch.msgid.link/20260202193925.3106272-1-hramamurthy@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The gve driver's "rx_dropped" statistic, exposed via `ethtool -S`,
incorrectly includes `rx_buf_alloc_fail` counts. These failures
represent an inability to allocate receive buffers, not true packet
drops where a received packet is discarded. This misrepresentation can
lead to inaccurate diagnostics.
This patch rectifies the ethtool "rx_dropped" calculation. It removes
`rx_buf_alloc_fail` from the total and adds `xdp_tx_errors` and
`xdp_redirect_errors`, which represent legitimate packet drops within
the XDP path.
Cc: stable@vger.kernel.org
Fixes: 433e274b8f ("gve: Add stats for gve.")
Signed-off-by: Max Yuan <maxyuan@google.com>
Reviewed-by: Jordan Rhee <jordanrhee@google.com>
Reviewed-by: Joshua Washington <joshwash@google.com>
Reviewed-by: Matt Olson <maolson@google.com>
Signed-off-by: Harshitha Ramamurthy <hramamurthy@google.com>
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Link: https://patch.msgid.link/20260202193925.3106272-3-hramamurthy@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Linus Torvalds
Hao Ge
Dave Airlie
Al Viro
Shigeru Yoshida
Jakub Kicinski
Jens Axboe
YunJe Shin
Keith Busch
Daniele Ceraolo Spurio
Shengjiu Wang
Breno Baptista
Andrew Fasano
Arnd Bergmann
Tejun Heo
Paolo Bonzini
Takashi Iwai
Karthik Poosa
Shuicheng Lin
Johannes Berg
Ziyi Guo
Frank Li
Chris Bainbridge
Jacob Keller
Kevin Hao
Max Yuan