commit 26b483d524 upstream.
This reverts commit e057b94772.
Sashiko points out that updating 'orig_x0' after secure_computing()
has returned is too late to handle the case where a seccomp filter is
re-evaluated after initially returning SECCOMP_RET_TRACE. This means
that a tracer can manipulate the first argument of the syscall behind
seccomp's back.
For now, revert the initial fix and we'll have another crack at it soon.
Since the incorrect fix was cc'd to stable, do the same here with an
appropriate fixes tag.
Cc: stable@vger.kernel.org
Fixes: e057b94772 ("arm64: syscall: Ensure saved x0 is kept in-sync with tracer updates")
Link: https://sashiko.dev/#/patchset/20260716120640.6590-1-will@kernel.org
Signed-off-by: Will Deacon <will@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit e057b94772 upstream.
When seccomp support was originally added to arm64 in a1ae65b219
("arm64: add seccomp support"), seccomp was erroneously called _before_
the ptrace syscall-enter-stop and therefore the tracer could trivially
manipulate the syscall register state after the seccomp check had
passed. This was subsequently fixed in a5cd110cb8 ("arm64/ptrace: run
seccomp after ptrace") by moving the seccomp check after the tracer has
run. Unfortunately, a decade later, that fix has been reported to be
incomplete.
On arm64, both the first argument to a syscall and its eventual return
value are allocated to register x0. In order to facilitate syscall
restarting and querying of syscall arguments on the syscall exit path,
the original value of x0 is stashed in 'struct pt_regs::orig_x0' early
during the syscall entry path and is returned for the first argument by
syscall_get_arguments(). Unlike 32-bit Arm, this stashed value is not
directly exposed via ptrace() and so changes to register x0 made by the
tracer on a syscall-enter-stop are not reflected in 'orig_x0'. This
means that seccomp, syscall tracepoints and audit can observe a stale
value for the register compared to the argument that will be observed by
the actual syscall.
Re-sync 'orig_x0' from x0 on the syscall entry path following a
potential ptrace stop (i.e. PTRACE_EVENTMSG_SYSCALL_ENTRY or
SECCOMP_RET_TRACE). This behaviour is limited to native tasks (because
compat tasks expose 'orig_r0' to ptrace) where the syscall is not being
skipped (because x0 is updated to hold the return value of -ENOSYS in
that case).
Cc: Kees Cook <kees@kernel.org>
Cc: Jinjie Ruan <ruanjinjie@huawei.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: stable@vger.kernel.org
Reported-by: Yiqi Sun <sunyiqixm@gmail.com>
Link: https://lore.kernel.org/all/20260529065444.1336608-1-sunyiqixm@gmail.com/
Suggested-by: Catalin Marinas <catalin.marinas@arm.com>
Fixes: a5cd110cb8 ("arm64/ptrace: run seccomp after ptrace")
Reviewed-by: Jinjie Ruan <ruanjinjie@huawei.com>
Tested-by: Jinjie Ruan <ruanjinjie@huawei.com>
Signed-off-by: Will Deacon <will@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit a9d6fb2840 upstream.
If trace_probe_log.argc is 0 in __trace_probe_log_err(), the loop
constructing the command string will not execute and p will remain equal to
command. Writing to *(p - 1) will cause an out-of-bounds access before
command. This should not happen, but better to be treated.
Reject if trace_probe_log.argc is 0.
Link: https://lore.kernel.org/all/178454233992.290363.18323091580600697731.stgit@devnote2/
Fixes: ab105a4fb8 ("tracing: Use tracing error_log with probe events")
Cc: stable@vger.kernel.org
Assisted-by: Antigravity:gemini-3.5-flash
Signed-off-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 8ce20bfba4 upstream.
In __set_print_fmt(), LEN_OR_ZERO is defined as (len ? len - pos : 0).
If len is non-zero but smaller than pos, len - pos evaluates to a negative
integer. When passed as a size argument to snprintf(), this negative value
is cast to a large unsigned size_t, bypassing buffer size limits.
Ensure len > pos before subtracting to avoid integer underflow.
Link: https://lore.kernel.org/all/178454234934.290363.15247317871499514139.stgit@devnote2/
Fixes: 5bf652aaf4 ("tracing/probes: Integrate duplicate set_print_fmt()")
Cc: stable@vger.kernel.org
Assisted-by: Antigravity:gemini-3.5-flash
Signed-off-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 15f197856d upstream.
In trace_probe_match_command_args(), a stack buffer buf[MAX_ARGSTR_LEN + 1]
(256 bytes) is used to format "<name>=<comm>". However, since name can
be up to 32 bytes (MAX_ARG_NAME_LEN) and comm up to 255 bytes
(MAX_ARGSTR_LEN), the formatted string can exceed 256 bytes and get
truncated by snprintf(), causing spurious argument matching failures.
Instead of formatting into a temporary buffer on stack, compare the
argument name, the '=' delimiter, and the comm expression directly.
Link: https://lore.kernel.org/all/178454233010.290363.10428767141343428804.stgit@devnote2/
Fixes: eb5bf81330 ("tracing/kprobe: Add per-probe delete from event")
Cc: stable@vger.kernel.org
Assisted-by: Antigravity:gemini-3.5-flash
Signed-off-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit f418d68d71 upstream.
eprobe_dyn_event_match() checks if the target event system in argv[0]
matches ep->event_system using strncmp(ep->event_system, argv[0], len).
However, if ep->event_system is longer than len (e.g. "eprobes" vs
"ep/event"), strncmp() still returns 0 because the first len characters
match.
Check that ep->event_system[len] is '\0' to ensure exact system name
matching.
Link: https://lore.kernel.org/all/178454235856.290363.14872590900774231133.stgit@devnote2/
Fixes: 7d5fda1c84 ("tracing: Fix event probe removal from dynamic events")
Cc: stable@vger.kernel.org
Assisted-by: Antigravity:gemini-3.5-flash
Signed-off-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit c1d87e724a upstream.
The mmiotrace tracer was added May 12th 2008. At that time, resources
created in pipe_open() could not be freed because there was not
pipe_close function pointer of the tracer. The pipe_close function pointer
was added in December 7th, 2009, but the mmiotrace tracer was not updated.
mmio_pipe_open() allocates a header_iter and takes a pci_dev reference
when trace_pipe is opened. mmio_close() frees them, but it was only
wired to the tracer's .close callback.
tracing_release_pipe() invokes .pipe_close, not .close, when the
trace_pipe file is released. As a result, closing trace_pipe with the
mmiotrace tracer active leaked the header_iter allocation and left a
stale pci_dev reference.
Set .pipe_close to mmio_close, matching how function_graph wires both
callbacks to the same handler.
Note, if the trace_pipe is read to completion, it will clean up the
resources, but if one were to run:
# head -n 1 /sys/kernel/tracing/trace_pipe
VERSION 20070824
Over and over again, it would trigger a massive leak.
Cc: stable@vger.kernel.org
Fixes: c521efd170 ("tracing: Add pipe_close interface)
Link: https://patch.msgid.link/20260715143604.14481-1-gaikwad.dcg@gmail.com
Signed-off-by: deepakraog <gaikwad.dcg@gmail.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 761b785a0c upstream.
intel_th_output_open() looks up the output device with
bus_find_device_by_devt(), which returns the device with a reference that
must be dropped after use.
commit 95fc36a234 ("intel_th: fix device leak on output open()")
attempted to drop the reference from intel_th_output_release(). However,
a successful open replaces file->f_op with the output driver file
operations before returning, so close runs the output driver release
callback instead.
For MSC outputs, close runs intel_th_msc_release(), which only removes
the per-file iterator and does not drop the device reference taken by
intel_th_output_open(). Consequently, every successful MSC output open
leaks one device reference.
Drop the device reference from intel_th_msc_release(), which is the
release path actually used for MSC output files. Remove the now-unused
intel_th_output_release() callback from intel_th_output_fops.
Fixes: 95fc36a234 ("intel_th: fix device leak on output open()")
Cc: stable <stable@kernel.org>
Signed-off-by: Guangshuo Li <lgs201920130244@gmail.com>
Reviewed-by: Johan Hovold <johan@kernel.org>
Link: https://patch.msgid.link/20260715070851.2077965-1-lgs201920130244@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit f112ea910e upstream.
Fix couple of problems in mei_cl_bus_dev_release():
mei_cl_flush_queues() is running without lock.
bus->file_list access after mei_dev_bus_put(bus) can become a
use-after-free if this was the last reference to bus.
Protect queues cleanup and WARN traversal by device lock there
to avoid the concurrent access problems.
Move WARN traversal before mei_dev_bus_put(bus).
This file uses bus variable name for mei_device, adjust
code of mei_cl_bus_dev_release() to use bus variable too.
Cc: stable <stable@kernel.org>
Fixes: 35e8a426b1 ("mei: bus: Check for still connected devices in mei_cl_bus_dev_release()")
Reviewed-by: Menachem Adin <menachem.adin@intel.com>
Signed-off-by: Alexander Usyskin <alexander.usyskin@intel.com>
Link: https://patch.msgid.link/20260705151259.3054795-1-alexander.usyskin@intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 7fb13fd7e9 upstream.
Commit b1b4efea05 ("serial: 8250_mid: Disable DMA for selected
platforms") replaced the dnv_board setup and exit callbacks with
PTR_IF(false, ...), which evaluates to NULL. However, the three call
sites in mid8250_probe() and mid8250_remove() unconditionally
dereference these function pointers without NULL checks, causing a NULL
pointer dereference (kernel oops) on any Denverton (DNV), Ice Lake Xeon
D (ICX-D/CDF), or Snowridge (SNR) platform.
Fix this by adding the missing NULL checks before calling the setup and
exit callbacks.
Fixes: b1b4efea05 ("serial: 8250_mid: Disable DMA for selected platforms")
Cc: stable <stable@kernel.org>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Jiangshan Yi <yijiangshan@kylinos.cn>
Link: https://patch.msgid.link/20260715073546.1875083-1-yijiangshan@kylinos.cn
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 17221216ae upstream.
Syzbot reported a general protection fault in
`comedi_get_is_subdevice_running()`, which was called from the interrupt
handler `parport_interrupt()` in the "comedi_parport" driver, but it
does not currently have a C reproducer for the problem. It's
probably due to a premature interrupt for one of two reasons:
1. The driver sets up the interrupt handler before the comedi subdevices
used by the interrupt handler have been allocated, but does not
disable the interrupt in the parallel port's CTRL register first.
2. The driver uses a user-supplied I/O port base address which Syzbot
would have supplied, but it might not be backed by real parallel port
hardware.
Change the initialization order in the driver's comedi "attach" handler
(`parport_attach()`) so that the hardware registers are initialized
before the interrupt handler is requested. This should prevent
premature interrupts occurring for real hardware.
Also add a test to the interrupt handler to ensure the comedi device is
fully attached and return early if it isn't.
Fixes: 241ab6ad71 ("Staging: comedi: add comedi_parport driver")
Reported-by: syzbot+f24c3d5d316011bacc70@syzkaller.appspotmail.com
Cc: stable <stable@kernel.org>
Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Link: https://patch.msgid.link/20260527125104.96596-1-abbotti@mev.co.uk
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 4a9ec5ec95 upstream.
After a recent upstream LLVM change to start generating jump and lookup
tables in switch statements in more instances [1], linking the
compressed x86 boot image when CONFIG_KERNEL_ZSTD is enabled fails with:
ld.lld: error: Unexpected run-time relocations (.rela) detected!
Dumping the relocations in misc.o, which is the only file influenced by
CONFIG_KERNEL_ZSTD in the decompressor, shows dynamic relocations to
some string constants, which correspond to the string literals in the
switch statement in handle_zstd_error():
Relocation section '.rela.data.rel.ro' at offset 0x277b0 contains 31 entries:
Offset Info Type Symbol's Value Symbol's Name + Addend
0000000000000000 0000006600000001 R_X86_64_64 0000000000000000 .rodata.str1.1 + 73a
0000000000000008 0000006600000001 R_X86_64_64 0000000000000000 .rodata.str1.1 + 78e
0000000000000010 0000006600000001 R_X86_64_64 0000000000000000 .rodata.str1.1 + 78e
0000000000000018 0000006600000001 R_X86_64_64 0000000000000000 .rodata.str1.1 + 78e
...
This optimization is problematic for the decompressor environment, as it
is built as -fPIE without any explicit absolute references (as described
at the top of misc.c) while not applying any dynamic relocations, hence
the linker assertion. To opt out of this optimization, which is of
little value in this special early boot code, and to mirror the other
x86 startup code in arch/x86/boot/startup, disable jump tables in the
decompressor.
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Acked-by: Ard Biesheuvel <ardb@kernel.org>
Cc: Bill Wendling <morbo@google.com>
Cc: Justin Stitt <justinstitt@google.com>
Cc: Nick Desaulniers <ndesaulniers@google.com>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: stable@vger.kernel.org
Link: https://github.com/llvm/llvm-project/commit/fa02a6ed66b1700c996b49c96c6bc0eb014c9518 [1]
Link: https://patch.msgid.link/20260722-x86-boot-compressed-disable-jt-clang-v2-1-7373d38482fb@kernel.org
Closes: https://github.com/ClangBuiltLinux/linux/issues/2165
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit b27e195d4d upstream.
mmc_ioctl_cdrom_volume() first reads the audio control mode page into a
32-byte stack buffer with cgc->buflen set to 24. If the device reports a
block descriptor, the function increases cgc->buflen to include that
descriptor and reads the page again.
For CDROMVOLCTRL, the function then builds a MODE SELECT parameter list
by moving cgc->buffer forward by offset - 8 bytes. This drops the block
descriptor from the outgoing payload and leaves a new 8-byte mode
parameter header in front of the audio control page. However, cgc->buflen
is left unchanged.
With a standard 8-byte block descriptor, cgc->buffer points at buffer + 8
but cgc->buflen remains 32. cdrom_mode_select() therefore asks the low
level packet path to write 32 bytes from that adjusted pointer, reading 8
bytes past the end of the 32-byte stack buffer.
This is not hit by CDROMVOLREAD, and CDROMVOLCTRL only triggers it on
drives that return a non-zero block descriptor length, which helps explain
why it has gone unnoticed. The overread is also sent to the device as
extra MODE SELECT payload, so it may not produce an obvious local failure.
Reduce cgc->buflen by the same amount as the buffer pointer adjustment so
the MODE SELECT transfer covers only the intended parameter list.
Fixes: 1da177e4c3 ("Linux-2.6.12-rc2")
Cc: stable@vger.kernel.org
Signed-off-by: Xu Rao <raoxu@uniontech.com>
Signed-off-by: Phillip Potter <phil@philpotter.co.uk>
Link: https://patch.msgid.link/20260720194421.1497-2-phil@philpotter.co.uk
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 73555fdab5 upstream.
When entering KDB via a breakpoint and then performing single-step
debugging, an oops is triggered. Now during single-step debugging,
kdb_local() expects the reason to be KDB_REASON_SSTEP, but it is
actually KDB_REASON_OOPS. In kdb_stub(), when determining the reason,
the ex_vector for single-step should be 0, as already implemented on
other architectures such as arm64 and riscv.
Before the patch:
[112]kdb> ss
Entering kdb (current=0x900020009f520000, pid 10661) on
processor 112 Oops: (null)
due to oops @ 0x90000000005b57a4
Cc: stable@vger.kernel.org
Signed-off-by: Haoran Jiang <jianghaoran@kylinos.cn>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 91a70492c0 upstream.
On EAECIS NL60R with EC firmware version 1.11, resuming from S3 has a
very high chance (>90%) of causing the EC to lose the previous backlight
power state. When this happens, the laptop resumes normally from S3, but
the backlight remains off (when shining on the screen with a flash light,
we can see the screen contents are updating normally).
Since there is no generic way to query the EC's backlight state on
Loongson laptop platforms, assume the worst-case scenario and restart
the backlight power inside the kernel each time the system resumes.
Cc: stable@vger.kernel.org
Fixes: 53c762b47f ("platform/loongarch: laptop: Add backlight power control support")
Tested-by: Yao Zi <me@ziyao.cc>
Tested-by: Xi Ruoyao <xry111@xry111.site>
Signed-off-by: Zixing Liu <liushuyu@aosc.io>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit bbf5f63991 upstream.
load_misc_binary() raises bprm->have_execfd as soon as it sees the 'O'
(or 'C') flag. This happens well before it opens the interpreter. If
that open fails the flag stays set on the bprm. binfmt_misc is at the
head of the format list so an interpreter open failure that returns
-ENOEXEC lets the search fall through to a later format. This means it
runs the matched binary directly having never staged an interpreter. So
bprm->executable is NULL while have_execfd falsely claims a descriptor
is present.
Consequently, begin_new_exec() dereferences the missing executable:
would_dump(bprm, bprm->executable);
and NULL derefs. Had it not, the hand-off later in the same function
would have failed anyway. FD_ADD(0, bprm->executable) rejects a NULL
file with -ENOMEM. Both sites are past the point of no return so the
exec cannot be unwound either way.
This can be reached by unprivileged users as binfmt_misc can be mounted
in user namespaces. So a user can register an 'O' entry whose
interpreter lives on a FUSE mount, have the FUSE server fail the open
with -ENOEXEC and execute a native ELF file that matches the entry.
have_execfd only means anything alongside the executable it describes
which is not set until the interpreter has been opened and staged.
So lets raise it there, next to execfd_creds, which is already set at
that point. An open failure now leaves it clear, so the fallback format
derives credentials from the binary and emits no AT_EXECFD, as it would
for any native exec. The argv rewrite load_misc_binary() performs before
the open is still not undone. This means the binary sees the interpreter
path in argv[0] and its own path in argv[1] but that predates this
change and only became observable once the exec stopped faulting.
Link: https://patch.msgid.link/20260720-beglichen-kognitiv-organismus-5e1e55326c56@brauner
Fixes: bc2bf338d5 ("exec: Remove recursion from search_binary_handler")
Cc: stable@vger.kernel.org
Signed-off-by: Christian Brauner (Amutable) <brauner@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 16cc4f5c1c upstream.
The stop value is derived from bprm->p >> PAGE_SHIFT. The index variable
is an unsigned long. If bprm->p drops below PAGE_SIZE and stop becomes
zero the loop condition index >= stop is always true.
After the index == 0 iteration the decrement wraps to ULONG_MAX and
bprm->page[ULONG_MAX] reads sizeof(void *) bytes in front of the array.
The pointer has wrapped to -1. That garbage pointer is then passed to
kmap_local_page() and PAGE_SIZE bytes are copied from wherever that
lands into the stack of the process being created. And the loop doesn't
terminate either...
Getting there only requires bprm->p < PAGE_SIZE. On !MMU
bprm_set_stack_limit() and bprm_hit_stack_limit() are empty. So the only
constraint on how far bprm->p is pushed down is valid_arg_len(), i.e.
that each individual string still fits in what is left.
bprm->p starts at PAGE_SIZE * MAX_ARG_PAGES - sizeof(void *) so a
single argument or environment string of a little over 31 pages leaves
it in the first page:
Oops - load access fault [#1]
CPU: 0 UID: 0 PID: 1 Comm: victim Not tainted 7.2.0-rc4 #1
epc : __memcpy+0xd4/0xf8
ra : transfer_args_to_stack+0xaa/0xae
s4 : ffffffffffffffff s2 : 0000000000000000
a1 : ffffffdc98000000 a2 : 0000000000001000
status: 0000000a00001880 badaddr: ffffffdc98000000 cause: 0000000000000005
[<801a5324>] __memcpy+0xd4/0xf8
[<800d5f6a>] load_flat_binary+0x43a/0x65e
[<800a2de4>] bprm_execve+0x1d4/0x316
[<800a351a>] do_execveat_common+0x12e/0x138
[<800a3d44>] __riscv_sys_execve+0x38/0x4e
Kernel panic - not syncing: Fatal exception in interrupt
This is an arcane bug but we should still fix it.
Count down from MAX_ARG_PAGES so the loop ends when index reaches stop,
stop == 0 included. The iterations performed are unchanged for every
other value of stop.
Only CONFIG_MMU=n builds are affected, transfer_args_to_stack() is used
by binfmt_flat and binfmt_elf_fdpic on nommu only.
The loop predates git history. commit 7e7ec6a934
("elf_fdpic_transfer_args_to_stack(): make it generic") only moved it
from binfmt_elf_fdpic.c into fs/exec.c and narrowed the copy to the used
part of the first page. The condition and the decrement are unchanged
from 2.6.12-rc2.
Link: https://patch.msgid.link/20260721-hochachtung-staumauer-pigmente-15d71f7d7d04@brauner
Fixes: 1da177e4c3 ("Linux-2.6.12-rc2")
Cc: stable@vger.kernel.org
Reviewed-by: David Hildenbrand (Arm) <david@kernel.org>
Signed-off-by: Christian Brauner (Amutable) <brauner@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit c783399efc upstream.
rfcomm_tty_set_termios() tests dlc->session without rfcomm_mutex and
later passes the pointer to rfcomm_send_rpn(). The latter dereferences
both session->initiator and session->sock. Meanwhile, krfcommd can
unlink the DLC and free the session while holding rfcomm_mutex.
The race can proceed as follows:
TTY ioctl task krfcommd
-------------- --------
load dlc->session
enter rfcomm_send_rpn()
lock rfcomm_mutex
clear dlc->session
free session
unlock rfcomm_mutex
read session->initiator
KASAN reported:
BUG: KASAN: slab-use-after-free in rfcomm_send_rpn+0x297/0x2a0
Read of size 4 at addr ffff88810012a850 by task poc/92
Call Trace:
rfcomm_send_rpn+0x297/0x2a0
rfcomm_tty_set_termios+0x50d/0x850
tty_set_termios+0x596/0x950
set_termios+0x46a/0x6e0
tty_mode_ioctl+0x152/0xbd0
tty_ioctl+0x915/0x1240
__x64_sys_ioctl+0x134/0x1c0
Allocated by task 92:
rfcomm_session_add+0x9e/0x2e0
rfcomm_dlc_open+0x8b1/0xe00
rfcomm_dev_activate+0x85/0x1a0
rfcomm_tty_open+0x90/0x280
Freed by task 68:
kfree+0x131/0x3c0
rfcomm_session_del+0x119/0x180
rfcomm_run+0x737/0x4710
Add rfcomm_dlc_send_rpn(), which holds rfcomm_mutex while it verifies
that the DLC is still attached and sends the RPN frame. Have the TTY
path use the helper and drop its unlocked session check. This keeps the
session valid through both the frame construction and socket send.
Fixes: 3a5e903c09 ("[Bluetooth]: Implement RFCOMM remote port negotiation")
Cc: stable@vger.kernel.org
Signed-off-by: Chengfeng Ye <nicoyip.dev@gmail.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit e9027ffbf5 upstream.
The hci_sync conversion moved class-of-device and EIR generation from an
HCI request built under hdev->lock to asynchronous command sync work.
The worker holds hdev->req_lock, but that lock does not serialize access
to hdev->uuids against add_uuid() and remove_uuid(), which update the
list under hdev->lock.
The following interleaving can therefore occur:
CPU0 (command sync work) CPU1 (management socket)
fetch uuid from the list
list_del(&uuid->list)
kfree(uuid)
read uuid->size
KASAN reports the resulting use-after-free:
BUG: KASAN: slab-use-after-free in eir_create+0xb8f/0xee0
Read of size 1 at addr ffff88810dbd8620 by task kworker/u17:0/87
Workqueue: hci0 hci_cmd_sync_work
Call Trace:
eir_create+0xb8f/0xee0
hci_update_eir_sync+0x1c0/0x330
hci_cmd_sync_work+0x13c/0x290
process_one_work+0x63a/0x1070
worker_thread+0x45b/0xd10
Allocated by task 86:
__kasan_kmalloc+0x8f/0xa0
add_uuid+0x18a/0x4b0
hci_sock_sendmsg+0x1033/0x1ea0
Freed by task 92:
__kasan_slab_free+0x43/0x70
kfree+0x131/0x3c0
remove_uuid+0x25e/0x560
hci_sock_sendmsg+0x1033/0x1ea0
Hold hdev->lock while generating and committing the class-of-device and
EIR snapshots. Release it before sending an HCI command, so controller
waits do not happen under the device lock. This protects all UUID list
walks in these paths and restores the serialization lost in the command
sync conversion.
Fixes: 161510ccf9 ("Bluetooth: hci_sync: Make use of hci_cmd_sync_queue set 1")
Cc: stable@vger.kernel.org
Signed-off-by: Chengfeng Ye <nicoyip.dev@gmail.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 30d49cba27 upstream.
rtw_get_chan_type() maps the driver's channel offset to nl80211 channel
types the wrong way around.
In this driver HAL_PRIME_CHNL_OFFSET_LOWER means the primary channel is
the lower 20 MHz half of the 40 MHz pair, i.e. the secondary channel is
above the primary one: rtw_get_center_ch() computes the center channel
as "channel + 2" for OFFSET_LOWER, and bwmode_update_check() sets
OFFSET_LOWER when the AP's HT operation IE announces SCA (secondary
channel above). In nl80211 terms that is NL80211_CHAN_HT40PLUS, not
HT40MINUS.
Because of the inversion, cfg80211_rtw_get_channel() reports an HT40+
association as HT40-. For an HT40+ AP on a low channel (e.g. channel 3)
the resulting chandef spans below the 2.4 GHz band edge and is invalid,
so the regulatory core tears the connection down 60 seconds
(REG_ENFORCE_GRACE_MS) after the AP's country IE triggers a regdomain
change: reg_check_chans_work() considers the reported chandef unusable
and calls cfg80211_leave(). The supplicant then reconnects, the country
IE changes the regdomain again, and the cycle repeats, causing a
disconnect/reconnect loop every ~65 seconds for as long as the link is
up.
Observed on a TECLAST X80 Power tablet (RTL8723BS) associated to an
HT40+ AP on channel 3 with a KR country IE; a kprobe trace showed
cfg80211_disconnect() being invoked from reg_check_chans_work(). With
the mapping fixed, "iw dev wlan0 info" reports the correct
"width: 40 MHz, center1: 2432 MHz" and the periodic disconnects stop.
Fixes: 5402cc178c ("staging: rtl8723bs: add get_channel cfg80211 implementation")
Cc: stable@vger.kernel.org
Assisted-by: Claude-Code:claude-fable-5 bpftrace
Signed-off-by: MinJea Kim <qndkdrnl@gmail.com>
Link: https://patch.msgid.link/20260714131421.3980-1-qndkdrnl@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 0e95ff792a upstream.
rtw_get_wps_ie() iterates over IE data from network frames without
validating that the IE header and payload fit within the remaining
buffer before reading them. Specifically:
- in_ie[cnt + 1] is read without checking cnt + 1 < in_len
- memcmp(&in_ie[cnt + 2], ...) accesses cnt + 2 without bounds check
- in_ie[cnt + 1] is used as length without verifying payload fits
Add bounds checks at the top of the loop body to break early if fewer
than 2 bytes remain for the IE header, or if the declared payload
extends past the end of the buffer. Also require at least 4 bytes of
payload before comparing the WPS OUI.
Fixes: 554c0a3abf ("staging: Add rtl8723bs sdio wifi driver")
Cc: stable <stable@kernel.org>
Signed-off-by: Moksh Panicker <mokshpanicker.7@gmail.com>
Link: https://patch.msgid.link/20260625202911.26782-1-mokshpanicker.7@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 538c51e9d1 upstream.
brcmf_pcie_release_scratchbuffers() frees the shared.scratch and
shared.ringupd DMA buffers with dma_free_coherent() but does not clear
the pointers afterwards, unlike the sibling release_ringbuffers() which
NULLs commonrings/flowrings/idxbuf on release.
Both the bus_reset .reset callback (brcmf_pcie_reset) and
brcmf_pcie_remove() call release_scratchbuffers. When reset teardown
has run before removal, remove's own teardown would call
dma_free_coherent() a second time on the already-freed DMA allocation.
NULL the pointers after free, matching release_ringbuffers(), so a later
release observes that the allocation has already been released. This
patch makes repeated sequential release safe; the reset-work lifetime is
handled separately by the following patch.
This issue was found by an in-house static analysis tool.
Fixes: 4684997d9e ("brcmfmac: reset PCIe bus on a firmware crash")
Cc: stable@vger.kernel.org
Signed-off-by: Fan Wu <fanwu01@zju.edu.cn>
Assisted-by: Codex:gpt-5.6
Acked-by: Arend van Spriel <arend.vanspriel@broadcom.com>
Link: https://patch.msgid.link/20260718024353.3147201-2-fanwu01@zju.edu.cn
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit da4082e91a upstream.
PKT_TYPE_TXRX_NOTIFY is an mmio-only event, but mt7921_rx_check() and
mt7921_queue_rx_skb() dispatch it to mt7921_mac_tx_free() on every bus.
mt7921_mac_tx_free() cleans the DMA tx queues with
mt76_queue_tx_cleanup(), which calls queue_ops->tx_cleanup(). Only the
mmio queue ops implement that callback; on USB and SDIO it is NULL, so
a TXRX_NOTIFY there calls a NULL pointer in the RX worker:
BUG: kernel NULL pointer dereference, address: 0000000000000000
RIP: 0010:0x0
Call Trace:
mt7921_mac_tx_free+0x64/0x310 [mt7921_common]
mt7921_rx_check+0x5f/0xf0 [mt7921_common]
mt76u_rx_worker+0x1b9/0x620 [mt76_usb]
Drop the event on non-mmio buses via mt76_is_mmio(), as in
commit 5683e1488a ("wifi: mt76: connac: do not check WED status for
non-mmio devices").
Fixes: 48fab5bbef ("mt76: mt7921: introduce mt7921s support")
Cc: stable@vger.kernel.org
Signed-off-by: Devin Wittmayer <lucid_duck@justthetip.ca>
Link: https://patch.msgid.link/20260627191336.20223-2-lucid_duck@justthetip.ca
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 39afc46c02 upstream.
PKT_TYPE_TXRX_NOTIFY is an mmio-only event, but mt7615_rx_check() and
mt7615_queue_rx_skb() dispatch it to mt7615_mac_tx_free() on every bus.
mt7615_mac_tx_free() cleans the DMA tx queues with
mt76_queue_tx_cleanup(), which calls queue_ops->tx_cleanup(). Only the
mmio queue ops implement that callback; on the mt7663 USB and SDIO
buses it is NULL, so a TXRX_NOTIFY there calls a NULL pointer in the RX
worker. Same defect as the mt7921 and mt7925 patches in this series.
Drop the event on non-mmio buses via mt76_is_mmio(), as in
commit 5683e1488a ("wifi: mt76: connac: do not check WED status for
non-mmio devices").
Fixes: eb99cc95c3 ("mt76: mt7615: introduce mt7663u support")
Cc: stable@vger.kernel.org
Signed-off-by: Devin Wittmayer <lucid_duck@justthetip.ca>
Link: https://patch.msgid.link/20260627191336.20223-4-lucid_duck@justthetip.ca
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 4c4c97b60a upstream.
wilc_parse_assoc_resp_info() computes the trailing IE length as
ies_len = buffer_len - sizeof(*res);
without first checking that buffer_len is at least sizeof(struct
wilc_assoc_resp) (6 bytes). buffer_len is the length reported for a
received association response (host_int_parse_assoc_resp_info() passes
hif_drv->assoc_resp / assoc_resp_info_len straight in) and must be
validated before the driver accesses the fixed header.
For a frame shorter than the 6-byte fixed header, the subtraction wraps.
For a four-byte response the result is truncated to a u16 ies_len of
65534, so kmemdup() then attempts to copy 65534 bytes starting at
buffer + sizeof(*res), beyond the valid association-response data
(CWE-125). A response shorter than four bytes can also cause an
out-of-bounds read of res->status_code at offsets 2 and 3.
Reject frames too short to hold the fixed header before touching the
header or computing ies_len. Also set the connection status to a failure
on this path: the caller falls through to a
"conn_info->status == WLAN_STATUS_SUCCESS" check after the parser
returns, so leaving the status untouched could let a malformed short
response be treated as a successful association.
Fixes: c5c77ba18e ("staging: wilc1000: Add SDIO/SPI 802.11 driver")
Cc: stable@vger.kernel.org
Assisted-by: Claude:claude-opus-4-8
Signed-off-by: Huihui Huang <hhhuang@smu.edu.sg>
Link: https://patch.msgid.link/20260714091811.3596126-1-hhhuang@smu.edu.sg
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit c3d68e294c upstream.
mwifiex_tdls_add_ht_oper() gates its follow-the-AP-bandwidth path on
bss_desc->bcn_ht_cap being present, but then dereferences a different
pointer, bss_desc->bcn_ht_oper:
if (ISSUPP_CHANWIDTH40(priv->adapter->hw_dot_11n_dev_cap) &&
bss_desc->bcn_ht_cap &&
ISALLOWED_CHANWIDTH40(bss_desc->bcn_ht_oper->ht_param))
bcn_ht_cap and bcn_ht_oper are populated independently while parsing the
associated AP's beacon in mwifiex_update_bss_desc_with_ie(): an AP that
advertises an HT Capabilities element but no HT Operation element leaves
bcn_ht_cap non-NULL and bcn_ht_oper NULL. Setting up a TDLS link to a
peer while associated to such an AP then dereferences the NULL
bcn_ht_oper and crashes the kernel. Every other bcn_ht_oper user in the
driver NULL-checks it first.
Guard on the pointer that is actually dereferenced.
Found by 0sec automated security-research tooling (https://0sec.ai).
Fixes: 396939f940 ("mwifiex: add HT operation IE in TDLS setup confirm")
Cc: stable@vger.kernel.org
Assisted-by: 0sec:multi-model
Signed-off-by: Doruk Tan Ozturk <doruk@0sec.ai>
Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com>
Link: https://patch.msgid.link/20260716103042.88469-1-doruk@0sec.ai
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 44126b6994 upstream.
aggr_recv_addba_req_evt() logs a debug message when the firmware-supplied
win_sz is outside [AGGR_WIN_SZ_MIN, AGGR_WIN_SZ_MAX] but does not
return. The out-of-range win_sz is then used in TID_WINDOW_SZ() to
compute a kzalloc size and stored in rxtid->hold_q_sz, leading to
zero-size or overflowed allocations and subsequent out-of-bounds access.
Clean up any previously active aggregation session for the TID first,
then return early when win_sz is out of the valid range, instead of
proceeding with a broken allocation size.
Fixes: bdcd817079 ("Add ath6kl cleaned up driver")
Cc: stable@vger.kernel.org
Reviewed-by: Vasanthakumar Thiagarajan <vasanthakumar.thiagarajan@oss.qualcomm.com>
Signed-off-by: Tristan Madani <tristan@talencesecurity.com>
Link: https://patch.msgid.link/20260702005020.708717-1-tristmd@gmail.com
Signed-off-by: Jeff Johnson <jeff.johnson@oss.qualcomm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 2c4dc0ed50 upstream.
queue_delete() closes the queue timer, then frees it. snd_seq_timer_close()
clears q->timer->timeri. snd_use_lock_sync() then drains borrowers, and
snd_seq_timer_delete() frees q->timer.
A borrower can re-open the timer inside that window. A SET_QUEUE_CLIENT
that took a queueptr() use_lock reference before the queue was unlinked
runs snd_seq_timer_open() after the close. Open refuses re-open only while
timeri is set, and the close just cleared it, so it re-opens timeri.
snd_seq_timer_delete() does not close that instance. Its snd_seq_timer_stop()
is a no-op, because running was cleared first. So it frees q->timer with the
instance still live. The queue is freed next.
The instance stays on the global timer with callback_data pointing at the
freed queue. A non-owner START on the unlocked queue arms it. The next tick
derefs the freed queue in snd_seq_timer_interrupt().
Reachable by an unprivileged user with access to /dev/snd/seq. No CAP and
no queue ownership required.
Close any lingering instance in the destructor. There, ->timeri can no
longer change: the queue is unlinked and all use_lock borrowers have
drained, so no snd_seq_queue_use() can re-open it. Close it before clearing
q->timer. snd_timer_close() waits for any in-flight snd_seq_timer_interrupt()
to finish, and that callback still reads q->timer (via snd_seq_check_queue()),
so q->timer must stay valid until it drains.
Fixes: 1da177e4c3 ("Linux-2.6.12-rc2")
Cc: stable@vger.kernel.org
Assisted-by: Claude:claude-opus-4-8
Signed-off-by: Norbert Szetei <norbert@doyensec.com>
Link: https://patch.msgid.link/422FDB81-2A68-47C7-A22D-2D3301E2E86D@doyensec.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 2282f97956 upstream.
The driver reuses the OF node of the parent device but fails to take
another reference to balance the one dropped by the platform bus code
when unbinding the parent and releasing the child devices.
Fix this by using the intended helper for reusing OF nodes.
Fixes: 4a5f8ae50b ("[media] davinci: vpif_capture: get subdevs from DT when available")
Cc: stable@vger.kernel.org # 4.13
Cc: Kevin Hilman <khilman@baylibre.com>
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit c2d1a2130c upstream.
The vivid_update_format_cap/out() functions must only be called if the
capture/output queue are not busy. But for the controls that select
the CROP/COMPOSE/SCALE capability that is not checked.
Only when streaming starts will they be set to 'grabbed' and it is
impossible to change the control, but between REQBUFS and STREAMON you
are still allowed to set these controls. Since vivid_update_format_cap/out
will change the format, this can cause unexpected results.
Besides adding these checks, also add a WARN_ON in
vivid_update_format_cap/out() if the queue is busy.
I'm 90% certain that this is the cause of this syzbot bug:
https://syzkaller.appspot.com/bug?extid=dac8f5eaa46837e97b89
But since we never have reproducers, it is hard to be certain. In any case,
these checks are needed regardless.
Reviewed-by: Nicolas Dufresne <nicolas.dufresne@collabora.com>
Fixes: 73c3f48230 ("[media] vivid: add the control handling code")
Cc: stable@vger.kernel.org
Reported-by: syzbot+dac8f5eaa46837e97b89@syzkaller.appspotmail.com
Closes: https://syzkaller.appspot.com/bug?extid=dac8f5eaa46837e97b89
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 1d793a29ef upstream.
Don't call vivid_update_format_cap() when switching to/from reduced fps
for HDMI inputs: that will also reset the format, which is overkill for
this.
Make a new vivid_update_reduced_fps() function that just updates the
dev->timeperframe_vid_cap.
Reviewed-by: Nicolas Dufresne <nicolas.dufresne@collabora.com>
Fixes: c79aa6aead ("[media] vivid-capture: add control for reduced frame rate")
Cc: stable@vger.kernel.org
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 33e2b833c6 upstream.
When platform_device_register() fails in vimc_init(), the embedded
struct device in vimc_pdev has already been initialized by
device_initialize(), but the failure path returns the error without
dropping the device reference for the current platform device:
vimc_init()
-> platform_device_register(&vimc_pdev)
-> device_initialize(&vimc_pdev.dev)
-> setup_pdev_dma_masks(&vimc_pdev)
-> platform_device_add(&vimc_pdev)
This leads to a reference leak when platform_device_register() fails.
Fix this by calling platform_device_put() before returning the error.
The issue was identified by a static analysis tool I developed and
confirmed by manual review.
Fixes: 4babf057c1 ("media: vimc: allocate vimc_device dynamically")
Cc: stable@vger.kernel.org
Signed-off-by: Guangshuo Li <lgs201920130244@gmail.com>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 9aa21e1549 upstream.
When platform_device_register() fails in vidtv_bridge_init(), the
embedded struct device in vidtv_bridge_dev has already been initialized
by device_initialize(), but the failure path returns the error without
dropping the device reference for the current platform device:
vidtv_bridge_init()
-> platform_device_register(&vidtv_bridge_dev)
-> device_initialize(&vidtv_bridge_dev.dev)
-> setup_pdev_dma_masks(&vidtv_bridge_dev)
-> platform_device_add(&vidtv_bridge_dev)
This leads to a reference leak when platform_device_register() fails.
Fix this by calling platform_device_put() before returning the error.
The issue was identified by a static analysis tool I developed and
confirmed by manual review.
Fixes: f90cf6079b ("media: vidtv: add a bridge driver")
Cc: stable@vger.kernel.org
Signed-off-by: Guangshuo Li <lgs201920130244@gmail.com>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit a562d6dc86 upstream.
vb2_read() and vb2_write() return size_t, but propagate
negative errno values from __vb2_perform_fileio().
This relies on implicit signed/unsigned conversions in callers
(e.g. vb2_fop_read()) to recover error codes:
__vb2_perform_fileio() -> -EINVAL
vb2_read() -> (size_t)-EINVAL
vb2_fop_read() -> -EINVAL
This relies on implicit conversions that are not obvious.
These helpers are exported (EXPORT_SYMBOL_GPL) and part of the
vb2 API, so changing their return type may affect existing users.
However, they conceptually follow read/write semantics, where
ssize_t is typically used to return either a byte count or a
negative error code.
Switch vb2_read() and vb2_write() to ssize_t, and update
__vb2_perform_fileio() accordingly.
Signed-off-by: Zile Xiong <xiongzile99@gmail.com>
Acked-by: Marek Szyprowski <m.szyprowski@samsung.com>
Fixes: b25748fe61 ("[media] v4l: videobuf2: add read() and write() emulator")
Cc: stable@vger.kernel.org
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit afbe4bc252 upstream.
HEVC slice parameters are shared stateless V4L2 controls, but the common
validation path does not verify the active L0/L1 reference counts before
driver-specific code consumes them.
The original report came from Cedrus, but the active count bounds are
not Cedrus-specific. Validate them in the common HEVC slice control path
so stateless HEVC drivers get the same basic guarantees as soon as the
control is queued.
Do not reject ref_idx_l0/ref_idx_l1 entries here. Existing userspace may
use out-of-range sentinel values such as 0xff for missing references, and
some hardware can use that information for concealment. Keep this common
check limited to the active reference counts.
Fixes: d395a78db9 ("media: hevc: Add decode params control")
Cc: stable@vger.kernel.org
Signed-off-by: Pengpeng Hou <pengpeng@iscas.ac.cn>
Reviewed-by: Nicolas Dufresne <nicolas.dufresne@collabora.com>
Signed-off-by: Nicolas Dufresne <nicolas.dufresne@collabora.com>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit caced3578b upstream.
If CONFIG_MEDIA_CONTROLLER is undefined, media_request_object_find() will
always return NULL, so its 2nd call in v4l2_ctrl_request_complete() would
fail as well as the 1st one and thus cause hdl to have a wrong value (at
the top of memory) and list_for_each_entry() to iterate over the garbage
data located there. Add NULL check for the 2nd call and place the error
cleanup at the end of v4l2_ctrl_request_complete()...
Found by Linux Verification Center (linuxtesting.org) with the Svace static
analysis tool.
Fixes: c3bf5129f3 ("media: v4l2-ctrls: always copy the controls on completion")
Cc: stable@vger.kernel.org
Signed-off-by: Sergey Shtylyov <s.shtylyov@auroraos.dev>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit e0f1c9a90e upstream.
If the vpe_top resource is missing, vpe_probe() returns -ENODEV after
v4l2_device_register() has succeeded. Probe failures do not call the
driver's remove callback, so the v4l2 device remains registered on that
error path.
Route that failure through the existing v4l2_device_unregister() unwind
label, matching the other errors after v4l2_device_register().
Fixes: 4d59c7d455 ("media: ti-vpe: vpe: Add missing null pointer checks")
Cc: stable@vger.kernel.org
Co-developed-by: Ijae Kim <ae878000@gmail.com>
Signed-off-by: Ijae Kim <ae878000@gmail.com>
Signed-off-by: Myeonghun Pak <mhun512@gmail.com>
Reviewed-by: Yemike Abhilash Chandra <y-abhilashchandra@ti.com>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit d5b5005533 upstream.
tegra_get_format_fourcc_by_idx() returns a u32 but uses -EINVAL to
signal an out-of-bounds index. This results in a large unsigned
value being returned, which may be interpreted as a valid fourcc.
Returning 0 is not a valid fourcc either. This condition should
never happen, so use WARN_ON_ONCE() to catch unexpected out-of-bounds
access and return a valid fallback format instead.
Suggested-by: Hans Verkuil <hverkuil+cisco@kernel.org>
Fixes: 3d8a97eabe ("media: tegra-video: Add Tegra210 Video input driver")
Cc: stable@vger.kernel.org
Reviewed-by: Luca Ceresoli <luca.ceresoli@bootlin.com>
Signed-off-by: Hungyu Lin <dennylin0707@gmail.com>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit bbba3e260a upstream.
The vb2 framework hands buffers to the driver via buf_queue() before
calling start_streaming(). If start_streaming() returns an error
without first returning those buffers via vb2_buffer_done(),
vb2_start_streaming() fires WARN_ON(owned_by_drv_count) and the queued
buffers leak.
sun4i_csi_start_streaming() returned -EINVAL when no matching CSI
format could be found, before any setup (scratch buffer allocation,
pipeline start) had been performed. The remaining error paths already
converge on the err_clear_dma_queue label, which calls
return_all_buffers(..., VB2_BUF_STATE_QUEUED) under csi->qlock. Jump
to that label directly: the intermediate err_disable_device /
err_disable_pipeline / err_free_scratch_buffer labels are skipped,
which is correct because nothing they would undo has happened yet.
This mirrors the uvcvideo fix in commit 4cf3b6fd54 ("media: uvcvideo:
Return queued buffers on start_streaming() failure").
Fixes: 577bbf23b7 ("media: sunxi: Add A10 CSI driver")
Cc: stable@vger.kernel.org
Signed-off-by: Valery Borovsky <vebohr@gmail.com>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 084973ebd6 upstream.
dcmi_graph_init() registers the async notifier before dcmi_probe() toggles
the reset line. If reset_control_assert() or reset_control_deassert()
fails afterwards, probe returns through err_cleanup and the driver core
will not call dcmi_remove().
Unregister the notifier before cleaning it up on that error path,
matching the successful remove path and the V4L2 async notifier lifetime
rules.
Signed-off-by: Myeonghun Pak <mhun512@gmail.com>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
Fixes: d079f94c90 ("media: platform: Switch to v4l2_async_notifier_add_subdev")
Cc: stable@vger.kernel.org
[hverkuil: added Fixes tag]
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit f86ed54838 upstream.
In saa7134_video_init1(), the return value of the first
saa7134_pgtable_alloc() is not checked. If it fails, the function
continues as if successful, leaving the driver with an invalid page
table. Additionally, if vb2_queue_init() for the VBI queue fails after
the video queue page table has been allocated, the allocated memory is
not freed before returning. The second saa7134_pgtable_alloc() also
lacks a return value check. Errors occur during device probing before
the device is fully registered, the normal cleanup path in
saa7134_finidev() is not executed, leading to memory leaks and
potential use of uninitialized DMA resources.
Check the return value of both saa7134_pgtable_alloc() calls and
propagate errors. On failure of any later step, free allocated page
tables to avoid memory leaks. Ensure control handlers are also
released on error to prevent further resource leakage.
Found by code review.
Signed-off-by: Ma Ke <make24@iscas.ac.cn>
Cc: stable@vger.kernel.org
Fixes: a00e68888d ("[media] saa7134: move saa7134_pgtable to saa7134_dmaqueue")
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 33ca0aab6f upstream.
The vb2 framework hands buffers to the driver via buf_queue() before
calling start_streaming(). If start_streaming() returns an error
without first returning those buffers via vb2_buffer_done(),
vb2_start_streaming() fires WARN_ON(owned_by_drv_count) and the queued
buffers leak.
rtl2832_sdr_start_streaming() had multiple error paths that hit this
trap: two direct early returns (-ENODEV, -ERESTARTSYS), plus six
`goto err` paths covering subdev s_power, tuner setup, ADC setup,
stream-buffer allocation, urb allocation, and urb submission failures.
None of them returned the queued buffers.
The original function had no distinct success exit and fell straight
through into the err label, which previously only did mutex_unlock and
"return ret". Adding queued-buffer cleanup at err must therefore be
paired with an explicit success return; otherwise every successful
start would also drain the buffer queue and kill streaming. Add that
success return, then add rtl2832_sdr_cleanup_queued_bufs() at the err
label and before each early return.
The cleanup helper takes a vb2_buffer_state argument so that the
start_streaming error paths can pass VB2_BUF_STATE_QUEUED (as
expected by userspace on start_streaming failure) while stop_streaming
keeps its existing VB2_BUF_STATE_ERROR semantics.
This mirrors the uvcvideo fix in commit 4cf3b6fd54 ("media: uvcvideo:
Return queued buffers on start_streaming() failure").
The err label still does not roll back power_ctrl(), frontend_ctrl(),
the POWER_ON flag, or stream/URB allocations that may have happened
before the failing step. Those are pre-existing leaks of a different
class and are not addressed here.
Fixes: 771138920e ("[media] rtl2832_sdr: Realtek RTL2832 SDR driver module")
Cc: stable@vger.kernel.org
Signed-off-by: Valery Borovsky <vebohr@gmail.com>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 680daf40a8 upstream.
cancel_delayed_work_sync() is called before i2c_mux_del_adapters()
in rtl2832_remove(). While the cancel waits for any running instance
of i2c_gate_work to finish, it does not prevent the timer from being
rescheduled by a concurrent thread.
During probe, the r820t_attach() call attempts I2C transfers through
the mux adapter. These transfers go through i2c_mux_master_xfer(),
which calls rtl2832_deselect() after the transfer completes,
rescheduling i2c_gate_work via schedule_delayed_work(). If this
transfer is still in flight when rtl2832_remove() runs,
rtl2832_deselect() can reschedule i2c_gate_work after it has been
cancelled, causing a use-after-free when kfree(dev) is called.
Fix this by calling i2c_mux_del_adapters() before
cancel_delayed_work_sync(). Once the mux adapter is unregistered, no
new I2C transfers can go through it, so rtl2832_deselect() can no
longer reschedule i2c_gate_work. The subsequent
cancel_delayed_work_sync() is then guaranteed to be final.
Fixes: cddcc40b1b ("[media] rtl2832: convert to use an explicit i2c mux core")
Cc: stable@vger.kernel.org
Reported-by: syzbot+019ced393ab913002b75@syzkaller.appspotmail.com
Closes: https://syzkaller.appspot.com/bug?extid=019ced393ab913002b75
Signed-off-by: Deepanshu Kartikey <kartikey406@gmail.com>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 436a693af0 upstream.
si476x_radio_probe() registers radio->v4l2dev before allocating the V4L2
controls and before registering the video device. If any of those later
steps fails, probe returns through the exit label after freeing only the
control handler.
A failed probe does not call si476x_radio_remove(), so the
v4l2_device_unregister() there is not reached. This leaves the parent
device reference taken by v4l2_device_register() behind on the error path.
Unregister the V4L2 device in the probe error path after freeing the
controls.
Fixes: b879a9c2a7 ("[media] v4l2: Add a V4L2 driver for SI476X MFD")
Cc: stable@vger.kernel.org
Co-developed-by: Ijae Kim <ae878000@gmail.com>
Signed-off-by: Ijae Kim <ae878000@gmail.com>
Signed-off-by: Myeonghun Pak <mhun512@gmail.com>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 975b2ee20e upstream.
The vb2 framework hands buffers to the driver via buf_queue() before
calling start_streaming(). If start_streaming() returns an error
without first returning those buffers via vb2_buffer_done(),
vb2_start_streaming() fires WARN_ON(owned_by_drv_count) and the queued
buffers leak.
pwc's start_streaming() had two early returns that hit this trap:
-ENODEV when the USB device was already disconnected, and -ERESTARTSYS
when mutex_lock_interruptible() was interrupted by a signal. Call the
existing pwc_cleanup_queued_bufs() helper with VB2_BUF_STATE_QUEUED
before returning (matching the state already used by the
pwc_isoc_init() error path in the same function).
This mirrors the uvcvideo fix in commit 4cf3b6fd54 ("media: uvcvideo:
Return queued buffers on start_streaming() failure").
Fixes: ceede9fa89 ("[media] pwc: Fix locking")
Cc: stable@vger.kernel.org
Signed-off-by: Valery Borovsky <vebohr@gmail.com>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 906e410dcf upstream.
pwc_isoc_init() submits its isochronous URBs with
usb_submit_urb(.., GFP_KERNEL) in a loop. After the first URB is
submitted, its completion handler pwc_isoc_handler() can run on another
CPU before the loop finishes:
start_streaming()
pwc_isoc_init()
usb_submit_urb(urbs[0], GFP_KERNEL)
pwc_isoc_handler(urbs[0])
pdev->fill_buf =
pwc_get_next_fill_buf(pdev)
usb_submit_urb(urbs[i>0], ..) -> fails
pwc_isoc_cleanup(pdev) /* kills URBs */
return ret;
pwc_cleanup_queued_bufs(pdev, VB2_BUF_STATE_QUEUED)
pwc_get_next_fill_buf() detaches a buffer from pdev->queued_bufs and
stores it in pdev->fill_buf. The error path in start_streaming() only
drains pdev->queued_bufs, so the buffer parked in pdev->fill_buf is
leaked. vb2_start_streaming() then triggers
WARN_ON(owned_by_drv_count).
stop_streaming() already handles this since commit 80b0963e16
("[media] pwc: fix WARN_ON"), which added the fill_buf drain in the
teardown path but not in the start_streaming() error path. Mirror that
handling on failure so start_streaming() returns with no buffer owned
by the driver.
Issue identified by automated review of the INV-003 series at
https://sashiko.dev/
Fixes: 885fe18f55 ("[media] pwc: Replace private buffer management code with videobuf2")
Cc: stable@vger.kernel.org
Signed-off-by: Valery Borovsky <vebohr@gmail.com>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Will Deacon
Masami Hiramatsu (Google)
deepakraog
Steven Rostedt
Guangshuo Li
Alexander Usyskin
Jiangshan Yi
Hugo Villeneuve
Ian Abbott
Nathan Chancellor
Xu Rao
Haoran Jiang
Zixing Liu
Christian Brauner
Chengfeng Ye
MinJea Kim
Moksh Panicker
Fan Wu
Devin Wittmayer
Huihui Huang
Doruk Tan Ozturk
Tristan Madani
Norbert Szetei
Johan Hovold
Hans Verkuil
Zile Xiong
Pengpeng Hou
Sergey Shtylyov
Myeonghun Pak
Hungyu Lin
Valery Borovsky
Ma Ke
Deepanshu Kartikey
Krzysztof Kozlowski
Guoniu Zhou