mirror of
https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git
synced 2026-09-22 09:34:56 +02:00
91b6dbced0ef1d680afdd69b14fc83d50ebafaf3
1353120
Commits
| Author | SHA1 | Message | Date | |
|---|---|---|---|---|
 Ido Schimmel
|
91b6dbced0 |
bridge: netfilter: Fix forwarding of fragmented packets
When netfilter defrag hooks are loaded (due to the presence of conntrack rules, for example), fragmented packets entering the bridge will be defragged by the bridge's pre-routing hook (br_nf_pre_routing() -> ipv4_conntrack_defrag()). Later on, in the bridge's post-routing hook, the defragged packet will be fragmented again. If the size of the largest fragment is larger than what the kernel has determined as the destination MTU (using ip_skb_dst_mtu()), the defragged packet will be dropped. Before commit |
||
 Jakob Unterwurzacher
|
ba54bce747 |
net: dsa: microchip: linearize skb for tail-tagging switches
The pointer arithmentic for accessing the tail tag only works for linear skbs. For nonlinear skbs, it reads uninitialized memory inside the skb headroom, essentially randomizing the tag. I have observed it gets set to 6 most of the time. Example where ksz9477_rcv thinks that the packet from port 1 comes from port 6 (which does not exist for the ksz9896 that's in use), dropping the packet. Debug prints added by me (not included in this patch): [ 256.645337] ksz9477_rcv:323 tag0=6 [ 256.645349] skb len=47 headroom=78 headlen=0 tailroom=0 mac=(64,14) mac_len=14 net=(78,0) trans=78 shinfo(txflags=0 nr_frags=1 gso(size=0 type=0 segs=0)) csum(0x0 start=0 offset=0 ip_summed=0 complete_sw=0 valid=0 level=0) hash(0x0 sw=0 l4=0) proto=0x00f8 pkttype=1 iif=3 priority=0x0 mark=0x0 alloc_cpu=0 vlan_all=0x0 encapsulation=0 inner(proto=0x0000, mac=0, net=0, trans=0) [ 256.645377] dev name=end1 feat=0x0002e10200114bb3 [ 256.645386] skb headroom: 00000000: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 [ 256.645395] skb headroom: 00000010: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 [ 256.645403] skb headroom: 00000020: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 [ 256.645411] skb headroom: 00000030: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 [ 256.645420] skb headroom: 00000040: ff ff ff ff ff ff 00 1c 19 f2 e2 db 08 06 [ 256.645428] skb frag: 00000000: 00 01 08 00 06 04 00 01 00 1c 19 f2 e2 db 0a 02 [ 256.645436] skb frag: 00000010: 00 83 00 00 00 00 00 00 0a 02 a0 2f 00 00 00 00 [ 256.645444] skb frag: 00000020: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 01 [ 256.645452] ksz_common_rcv:92 dsa_conduit_find_user returned NULL Call skb_linearize before trying to access the tag. This patch fixes ksz9477_rcv which is used by the ksz9896 I have at hand, and also applies the same fix to ksz8795_rcv which seems to have the same problem. Signed-off-by: Jakob Unterwurzacher <jakob.unterwurzacher@cherry.de> CC: stable@vger.kernel.org Fixes: |
||
 Stanislav Fomichev
|
6b1d3c5f67 |
team: grab team lock during team_change_rx_flags
Syzkaller reports the following issue:
BUG: sleeping function called from invalid context at kernel/locking/mutex.c:578
netdev_lock include/linux/netdevice.h:2751 [inline]
netdev_lock_ops include/net/netdev_lock.h:42 [inline]
dev_set_promiscuity+0x10e/0x260 net/core/dev_api.c:285
bond_set_promiscuity drivers/net/bonding/bond_main.c:922 [inline]
bond_change_rx_flags+0x219/0x690 drivers/net/bonding/bond_main.c:4732
dev_change_rx_flags net/core/dev.c:9145 [inline]
__dev_set_promiscuity+0x3f5/0x590 net/core/dev.c:9189
netif_set_promiscuity+0x50/0xe0 net/core/dev.c:9201
dev_set_promiscuity+0x126/0x260 net/core/dev_api.c:286
^^ all of the above is under rcu lock
team_change_rx_flags+0x1b3/0x330 drivers/net/team/team_core.c:1785
dev_change_rx_flags net/core/dev.c:9145 [inline]
__dev_set_promiscuity+0x3f5/0x590 net/core/dev.c:9189
netif_set_promiscuity+0x50/0xe0 net/core/dev.c:9201
dev_set_promiscuity+0x126/0x260 net/core/dev_api.c:286
hsr_del_port+0x25e/0x2d0 net/hsr/hsr_slave.c:233
hsr_netdev_notify+0x827/0xb60 net/hsr/hsr_main.c:104
notifier_call_chain+0x1b3/0x3e0 kernel/notifier.c:85
call_netdevice_notifiers_extack net/core/dev.c:2214 [inline]
call_netdevice_notifiers net/core/dev.c:2228 [inline]
unregister_netdevice_many_notify+0x15d8/0x2330 net/core/dev.c:11970
rtnl_delete_link net/core/rtnetlink.c:3522 [inline]
rtnl_dellink+0x488/0x710 net/core/rtnetlink.c:3564
rtnetlink_rcv_msg+0x7cc/0xb70 net/core/rtnetlink.c:6955
netlink_rcv_skb+0x219/0x490 net/netlink/af_netlink.c:2534
netlink_unicast_kernel net/netlink/af_netlink.c:1313 [inline]
netlink_unicast+0x758/0x8d0 net/netlink/af_netlink.c:1339
netlink_sendmsg+0x805/0xb30 net/netlink/af_netlink.c:1883
team_change_rx_flags runs under rcu lock which means we can't grab
instance lock for the lower devices. Switch to team->lock, similar
to what we already do for team_set_mac_address and team_change_mtu.
Fixes:
|
||
 Sagi Maimon
|
c9e455581e |
ptp: ocp: Limit signal/freq counts in summary output functions
The debugfs summary output could access uninitialized elements in
the freq_in[] and signal_out[] arrays, causing NULL pointer
dereferences and triggering a kernel Oops (page_fault_oops).
This patch adds u8 fields (nr_freq_in, nr_signal_out) to track the
number of initialized elements, with a maximum of 4 per array.
The summary output functions are updated to respect these limits,
preventing out-of-bounds access and ensuring safe array handling.
Widen the label variables because the change confuses GCC about
max length of the strings.
Fixes:
|
||
 Jakub Kicinski
|
c39b1bb5bc |
Merge tag 'for-net-2025-05-15' of git://git.kernel.org/pub/scm/linux/kernel/git/bluetooth/bluetooth
Luiz Augusto von Dentz says: ==================== bluetooth pull request for net: - btusb: use skb_pull to avoid unsafe access in QCA dump handling - L2CAP: Fix not checking l2cap_chan security level * tag 'for-net-2025-05-15' of git://git.kernel.org/pub/scm/linux/kernel/git/bluetooth/bluetooth: Bluetooth: btusb: use skb_pull to avoid unsafe access in QCA dump handling Bluetooth: L2CAP: Fix not checking l2cap_chan security level ==================== Link: https://patch.msgid.link/20250515171909.1606243-1-luiz.dentz@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> |
||
 Linus Torvalds
|
ef935650e0 |
Merge tag 'net-6.15-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Pull networking fixes from Jakub Kicinski:
"Including fixes from Bluetooth and wireless.
A few more fixes for the locking changes trickling in. Nothing too
alarming, I suspect those will continue for another release. Other
than that things are slowing down nicely.
Current release - fix to a fix:
- Bluetooth: hci_event: use key encryption size when its known
- tools: ynl-gen: allow multi-attr without nested-attributes again
Current release - regressions:
- locking fixes:
- lock lower level devices when updating features
- eth: bnxt_en: bring back rtnl_lock() in the bnxt_open() path
- devmem: fix panic when Netlink socket closes after module unload
Current release - new code bugs:
- eth: txgbe: fixes for FW communication on new AML devices
Previous releases - always broken:
- sched: flush gso_skb list too during ->change(), avoid potential
null-deref on reconfig
- wifi: mt76: disable NAPI on driver removal
- hv_netvsc: fix error 'nvsp_rndis_pkt_complete error status: 2'"
* tag 'net-6.15-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (44 commits)
net: devmem: fix kernel panic when netlink socket close after module unload
tsnep: fix timestamping with a stacked DSA driver
net/tls: fix kernel panic when alloc_page failed
bnxt_en: bring back rtnl_lock() in the bnxt_open() path
mlxsw: spectrum_router: Fix use-after-free when deleting GRE net devices
wifi: mac80211: Set n_channels after allocating struct cfg80211_scan_request
octeontx2-pf: Do not reallocate all ntuple filters
wifi: mt76: mt7925: fix missing hdr_trans_tlv command for broadcast wtbl
wifi: mt76: disable napi on driver removal
Drivers: hv: vmbus: Remove vmbus_sendpacket_pagebuffer()
hv_netvsc: Remove rmsg_pgcnt
hv_netvsc: Preserve contiguous PFN grouping in the page buffer array
hv_netvsc: Use vmbus_sendpacket_mpb_desc() to send VMBus messages
Drivers: hv: Allow vmbus_sendpacket_mpb_desc() to create multiple ranges
octeontx2-af: Fix CGX Receive counters
net: ethernet: mtk_eth_soc: fix typo for declaration MT7988 ESW capability
net: libwx: Fix FW mailbox unknown command
net: libwx: Fix FW mailbox reply timeout
net: txgbe: Fix to calculate EEPROM checksum for AML devices
octeontx2-pf: macsec: Fix incorrect max transmit size in TX secy
...
|
||
 En-Wei Wu
|
4bcb0c7dc2 |
Bluetooth: btusb: use skb_pull to avoid unsafe access in QCA dump handling
Use skb_pull() and skb_pull_data() to safely parse QCA dump packets.
This avoids direct pointer math on skb->data, which could lead to
invalid access if the packet is shorter than expected.
Fixes:
|
||
 Luiz Augusto von Dentz
|
7af8479d9e |
Bluetooth: L2CAP: Fix not checking l2cap_chan security level
l2cap_check_enc_key_size shall check the security level of the
l2cap_chan rather than the hci_conn since for incoming connection
request that may be different as hci_conn may already been
encrypted using a different security level.
Fixes:
|
||
 Taehee Yoo
|
0afc44d8cd |
net: devmem: fix kernel panic when netlink socket close after module unload
Kernel panic occurs when a devmem TCP socket is closed after NIC module
is unloaded.
This is Devmem TCP unregistration scenarios. number is an order.
(a)netlink socket close (b)pp destroy (c)uninstall result
1 2 3 OK
1 3 2 (d)Impossible
2 1 3 OK
3 1 2 (e)Kernel panic
2 3 1 (d)Impossible
3 2 1 (d)Impossible
(a) netdev_nl_sock_priv_destroy() is called when devmem TCP socket is
closed.
(b) page_pool_destroy() is called when the interface is down.
(c) mp_ops->uninstall() is called when an interface is unregistered.
(d) There is no scenario in mp_ops->uninstall() is called before
page_pool_destroy().
Because unregister_netdevice_many_notify() closes interfaces first
and then calls mp_ops->uninstall().
(e) netdev_nl_sock_priv_destroy() accesses struct net_device to acquire
netdev_lock().
But if the interface module has already been removed, net_device
pointer is invalid, so it causes kernel panic.
In summary, there are only 3 possible scenarios.
A. sk close -> pp destroy -> uninstall.
B. pp destroy -> sk close -> uninstall.
C. pp destroy -> uninstall -> sk close.
Case C is a kernel panic scenario.
In order to fix this problem, It makes mp_dmabuf_devmem_uninstall() set
binding->dev to NULL.
It indicates an bound net_device was unregistered.
It makes netdev_nl_sock_priv_destroy() do not acquire netdev_lock()
if binding->dev is NULL.
A new binding->lock is added to protect a dev of a binding.
So, lock ordering is like below.
priv->lock
netdev_lock(dev)
binding->lock
Tests:
Scenario A:
./ncdevmem -s 192.168.1.4 -c 192.168.1.2 -f $interface -l -p 8000 \
-v 7 -t 1 -q 1 &
pid=$!
sleep 10
kill $pid
ip link set $interface down
modprobe -rv $module
Scenario B:
./ncdevmem -s 192.168.1.4 -c 192.168.1.2 -f $interface -l -p 8000 \
-v 7 -t 1 -q 1 &
pid=$!
sleep 10
ip link set $interface down
kill $pid
modprobe -rv $module
Scenario C:
./ncdevmem -s 192.168.1.4 -c 192.168.1.2 -f $interface -l -p 8000 \
-v 7 -t 1 -q 1 &
pid=$!
sleep 10
modprobe -rv $module
sleep 5
kill $pid
Splat looks like:
Oops: general protection fault, probably for non-canonical address 0xdffffc001fffa9f7: 0000 [#1] SMP DEBUG_PAGEALLOC KASAN NOPTI
KASAN: probably user-memory-access in range [0x00000000fffd4fb8-0x00000000fffd4fbf]
CPU: 0 UID: 0 PID: 2041 Comm: ncdevmem Tainted: G B W 6.15.0-rc1+ #2 PREEMPT(undef) 0947ec89efa0fd68838b78e36aa1617e97ff5d7f
Tainted: [B]=BAD_PAGE, [W]=WARN
RIP: 0010:__mutex_lock (./include/linux/sched.h:2244 kernel/locking/mutex.c:400 kernel/locking/mutex.c:443 kernel/locking/mutex.c:605 kernel/locking/mutex.c:746)
Code: ea 03 80 3c 02 00 0f 85 4f 13 00 00 49 8b 1e 48 83 e3 f8 74 6a 48 b8 00 00 00 00 00 fc ff df 48 8d 7b 34 48 89 fa 48 c1 ea 03 <0f> b6 f
RSP: 0018:ffff88826f7ef730 EFLAGS: 00010203
RAX: dffffc0000000000 RBX: 00000000fffd4f88 RCX: ffffffffaa9bc811
RDX: 000000001fffa9f7 RSI: 0000000000000008 RDI: 00000000fffd4fbc
RBP: ffff88826f7ef8b0 R08: 0000000000000000 R09: ffffed103e6aa1a4
R10: 0000000000000007 R11: ffff88826f7ef442 R12: fffffbfff669f65e
R13: ffff88812a830040 R14: ffff8881f3550d20 R15: 00000000fffd4f88
FS: 0000000000000000(0000) GS:ffff888866c05000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 0000563bed0cb288 CR3: 00000001a7c98000 CR4: 00000000007506f0
PKRU: 55555554
Call Trace:
<TASK>
...
netdev_nl_sock_priv_destroy (net/core/netdev-genl.c:953 (discriminator 3))
genl_release (net/netlink/genetlink.c:653 net/netlink/genetlink.c:694 net/netlink/genetlink.c:705)
...
netlink_release (net/netlink/af_netlink.c:737)
...
__sock_release (net/socket.c:647)
sock_close (net/socket.c:1393)
Fixes:
|
||
 Gerhard Engleder
|
b3ca9eef66 |
tsnep: fix timestamping with a stacked DSA driver
This driver is susceptible to a form of the bug explained in commit |
||
 Pengtao He
|
491deb9b8c |
net/tls: fix kernel panic when alloc_page failed
We cannot set frag_list to NULL pointer when alloc_page failed.
It will be used in tls_strp_check_queue_ok when the next time
tls_strp_read_sock is called.
This is because we don't reset full_len in tls_strp_flush_anchor_copy()
so the recv path will try to continue handling the partial record
on the next call but we dettached the rcvq from the frag list.
Alternative fix would be to reset full_len.
Unable to handle kernel NULL pointer dereference
at virtual address 0000000000000028
Call trace:
tls_strp_check_rcv+0x128/0x27c
tls_strp_data_ready+0x34/0x44
tls_data_ready+0x3c/0x1f0
tcp_data_ready+0x9c/0xe4
tcp_data_queue+0xf6c/0x12d0
tcp_rcv_established+0x52c/0x798
Fixes:
|
||
|
Jakub Kicinski
|
3933536c87 |
Merge tag 'wireless-2025-05-15' of https://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless
Johannes Berg says: ==================== Couple of stragglers: - mac80211: fix syzbot/ubsan in scan counted-by - mt76: fix NAPI handling on driver remove - mt67: fix multicast/ipv6 receive * tag 'wireless-2025-05-15' of https://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless: wifi: mac80211: Set n_channels after allocating struct cfg80211_scan_request wifi: mt76: mt7925: fix missing hdr_trans_tlv command for broadcast wtbl wifi: mt76: disable napi on driver removal ==================== Link: https://patch.msgid.link/20250515121749.61912-4-johannes@sipsolutions.net Signed-off-by: Jakub Kicinski <kuba@kernel.org> |
||
 Michael Chan
|
325eb217e4 |
bnxt_en: bring back rtnl_lock() in the bnxt_open() path
Error recovery, PCIe AER, resume, and TX timeout will invoke bnxt_open()
with netdev_lock only. This will cause RTNL assert failure in
netif_set_real_num_tx_queues(), netif_set_real_num_tx_queues(),
and netif_set_real_num_tx_queues().
Example error recovery assert:
RTNL: assertion failed at net/core/dev.c (3178)
WARNING: CPU: 3 PID: 3392 at net/core/dev.c:3178 netif_set_real_num_tx_queues+0x1fd/0x210
Call Trace:
<TASK>
? __pfx_bnxt_msix+0x10/0x10 [bnxt_en]
__bnxt_open_nic+0x1ef/0xb20 [bnxt_en]
bnxt_open+0xda/0x130 [bnxt_en]
bnxt_fw_reset_task+0x21f/0x780 [bnxt_en]
process_scheduled_works+0x9d/0x400
For now, bring back rtnl_lock() in all these code paths that can invoke
bnxt_open(). In the bnxt_queue_start() error path, we don't have
rtnl_lock held so we just change it to call netif_close() instead of
bnxt_reset_task() for simplicity. This error path is unlikely so it
should be fine.
Fixes:
|
||
|
Ido Schimmel
|
92ec485503 |
mlxsw: spectrum_router: Fix use-after-free when deleting GRE net devices
The driver only offloads neighbors that are constructed on top of net
devices registered by it or their uppers (which are all Ethernet). The
device supports GRE encapsulation and decapsulation of forwarded
traffic, but the driver will not offload dummy neighbors constructed on
top of GRE net devices as they are not uppers of its net devices:
# ip link add name gre1 up type gre tos inherit local 192.0.2.1 remote 198.51.100.1
# ip neigh add 0.0.0.0 lladdr 0.0.0.0 nud noarp dev gre1
$ ip neigh show dev gre1 nud noarp
0.0.0.0 lladdr 0.0.0.0 NOARP
(Note that the neighbor is not marked with 'offload')
When the driver is reloaded and the existing configuration is replayed,
the driver does not perform the same check regarding existing neighbors
and offloads the previously added one:
# devlink dev reload pci/0000:01:00.0
$ ip neigh show dev gre1 nud noarp
0.0.0.0 lladdr 0.0.0.0 offload NOARP
If the neighbor is later deleted, the driver will ignore the
notification (given the GRE net device is not its upper) and will
therefore keep referencing freed memory, resulting in a use-after-free
[1] when the net device is deleted:
# ip neigh del 0.0.0.0 lladdr 0.0.0.0 dev gre1
# ip link del dev gre1
Fix by skipping neighbor replay if the net device for which the replay
is performed is not our upper.
[1]
BUG: KASAN: slab-use-after-free in mlxsw_sp_neigh_entry_update+0x1ea/0x200
Read of size 8 at addr ffff888155b0e420 by task ip/2282
[...]
Call Trace:
<TASK>
dump_stack_lvl+0x6f/0xa0
print_address_description.constprop.0+0x6f/0x350
print_report+0x108/0x205
kasan_report+0xdf/0x110
mlxsw_sp_neigh_entry_update+0x1ea/0x200
mlxsw_sp_router_rif_gone_sync+0x2a8/0x440
mlxsw_sp_rif_destroy+0x1e9/0x750
mlxsw_sp_netdevice_ipip_ol_event+0x3c9/0xdc0
mlxsw_sp_router_netdevice_event+0x3ac/0x15e0
notifier_call_chain+0xca/0x150
call_netdevice_notifiers_info+0x7f/0x100
unregister_netdevice_many_notify+0xc8c/0x1d90
rtnl_dellink+0x34e/0xa50
rtnetlink_rcv_msg+0x6fb/0xb70
netlink_rcv_skb+0x131/0x360
netlink_unicast+0x426/0x710
netlink_sendmsg+0x75a/0xc20
__sock_sendmsg+0xc1/0x150
____sys_sendmsg+0x5aa/0x7b0
___sys_sendmsg+0xfc/0x180
__sys_sendmsg+0x121/0x1b0
do_syscall_64+0xbb/0x1d0
entry_SYSCALL_64_after_hwframe+0x4b/0x53
Fixes:
|
||
 Johannes Berg
|
943aeda0d7 |
Merge tag 'mt76-fixes-2025-05-15' of https://github.com/nbd168/wireless
Felix Fietkau says: =================== mt76 fix for 6.15 - disable napi on driver removal to fix warning - fix multicast rx regression on mt7925 =================== Link: https://patch.msgid.link/3b526d06-b717-4d47-817c-a9f47b796a31@nbd.name/ Signed-off-by: Johannes Berg <johannes.berg@intel.com> |
||
 Kees Cook
|
82bbe02b25 |
wifi: mac80211: Set n_channels after allocating struct cfg80211_scan_request
Make sure that n_channels is set after allocating the
struct cfg80211_registered_device::int_scan_req member. Seen with
syzkaller:
UBSAN: array-index-out-of-bounds in net/mac80211/scan.c:1208:5
index 0 is out of range for type 'struct ieee80211_channel *[] __counted_by(n_channels)' (aka 'struct ieee80211_channel *[]')
This was missed in the initial conversions because I failed to locate
the allocation likely due to the "sizeof(void *)" not matching the
"channels" array type.
Reported-by: syzbot+4bcdddd48bb6f0be0da1@syzkaller.appspotmail.com
Closes: https://lore.kernel.org/lkml/680fd171.050a0220.2b69d1.045e.GAE@google.com/
Fixes:
|
||
 Subbaraya Sundeep
|
dcb479fde0 |
octeontx2-pf: Do not reallocate all ntuple filters
If ntuple filters count is modified followed by
unicast filters count using devlink then the ntuple count
set by user is ignored and all the ntuple filters are
being reallocated. Fix this by storing the ntuple count
set by user. Without this patch, say if user tries
to modify ntuple count as 8 followed by ucast filter count as 4
using devlink commands then ntuple count is being reverted to
default value 16 i.e, not retaining user set value 8.
Fixes:
|
||
 Ming Yen Hsieh
|
0aa8496add |
wifi: mt76: mt7925: fix missing hdr_trans_tlv command for broadcast wtbl
Ensure that the hdr_trans_tlv command is included in the broadcast wtbl to
prevent the IPv6 and multicast packet from being dropped by the chip.
Cc: stable@vger.kernel.org
Fixes:
|
||
 Fedor Pchelkin
|
78ab4be549 |
wifi: mt76: disable napi on driver removal
A warning on driver removal started occurring after commit |
||
|
Linus Torvalds
|
088d13246a |
Merge tag 'kbuild-fixes-v6.15' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild
Pull Kbuild fixes from Masahiro Yamada: - Add proper pahole version dependency to CONFIG_GENDWARFKSYMS to avoid module loading errors - Fix UAPI header tests for the OpenRISC architecture - Add dependency on the libdw package in Debian and RPM packages - Disable -Wdefault-const-init-unsafe warnings on Clang - Make "make clean ARCH=um" also clean the arch/x86/ directory - Revert the use of -fmacro-prefix-map=, which causes issues with debugger usability * tag 'kbuild-fixes-v6.15' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild: kbuild: fix typos "module.builtin" to "modules.builtin" Revert "kbuild, rust: use -fremap-path-prefix to make paths relative" Revert "kbuild: make all file references relative to source root" kbuild: fix dependency on sorttable init: remove unused CONFIG_CC_CAN_LINK_STATIC um: let 'make clean' properly clean underlying SUBARCH as well kbuild: Disable -Wdefault-const-init-unsafe kbuild: rpm-pkg: Add (elfutils-devel or libdw-devel) to BuildRequires kbuild: deb-pkg: Add libdw-dev:native to Build-Depends-Arch usr/include: openrisc: don't HDRTEST bpf_perf_event.h kbuild: Require pahole <v1.28 or >v1.29 with GENDWARFKSYMS on X86 |
||
|
Jakub Kicinski
|
09db7a4d28 |
Merge branch 'hv_netvsc-fix-error-nvsp_rndis_pkt_complete-error-status-2'
Michael Kelley says: ==================== hv_netvsc: Fix error "nvsp_rndis_pkt_complete error status: 2" Starting with commit |
||
 Michael Kelley
|
45a442fe36 |
Drivers: hv: vmbus: Remove vmbus_sendpacket_pagebuffer()
With the netvsc driver changed to use vmbus_sendpacket_mpb_desc() instead of vmbus_sendpacket_pagebuffer(), the latter has no remaining callers. Remove it. Cc: <stable@vger.kernel.org> # 6.1.x Signed-off-by: Michael Kelley <mhklinux@outlook.com> Link: https://patch.msgid.link/20250513000604.1396-6-mhklinux@outlook.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> |
||
|
Michael Kelley
|
5bbc644bbf |
hv_netvsc: Remove rmsg_pgcnt
init_page_array() now always creates a single page buffer array entry for the rndis message, even if the rndis message crosses a page boundary. As such, the number of page buffer array entries used for the rndis message must no longer be tracked -- it is always just 1. Remove the rmsg_pgcnt field and use "1" where the value is needed. Cc: <stable@vger.kernel.org> # 6.1.x Signed-off-by: Michael Kelley <mhklinux@outlook.com> Link: https://patch.msgid.link/20250513000604.1396-5-mhklinux@outlook.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> |
||
|
Michael Kelley
|
41a6328b2c |
hv_netvsc: Preserve contiguous PFN grouping in the page buffer array
Starting with commit |
||
|
Michael Kelley
|
4f98616b85 |
hv_netvsc: Use vmbus_sendpacket_mpb_desc() to send VMBus messages
netvsc currently uses vmbus_sendpacket_pagebuffer() to send VMBus messages. This function creates a series of GPA ranges, each of which contains a single PFN. However, if the rndis header in the VMBus message crosses a page boundary, the netvsc protocol with the host requires that both PFNs for the rndis header must be in a single "GPA range" data structure, which isn't possible with vmbus_sendpacket_pagebuffer(). As the first step in fixing this, add a new function netvsc_build_mpb_array() to build a VMBus message with multiple GPA ranges, each of which may contain multiple PFNs. Use vmbus_sendpacket_mpb_desc() to send this VMBus message to the host. There's no functional change since higher levels of netvsc don't maintain or propagate knowledge of contiguous PFNs. Based on its input, netvsc_build_mpb_array() still produces a separate GPA range for each PFN and the behavior is the same as with vmbus_sendpacket_pagebuffer(). But the groundwork is laid for a subsequent patch to provide the necessary grouping. Cc: <stable@vger.kernel.org> # 6.1.x Signed-off-by: Michael Kelley <mhklinux@outlook.com> Link: https://patch.msgid.link/20250513000604.1396-3-mhklinux@outlook.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> |
||
|
Michael Kelley
|
380b75d307 |
Drivers: hv: Allow vmbus_sendpacket_mpb_desc() to create multiple ranges
vmbus_sendpacket_mpb_desc() is currently used only by the storvsc driver and is hardcoded to create a single GPA range. To allow it to also be used by the netvsc driver to create multiple GPA ranges, no longer hardcode as having a single GPA range. Allow the calling driver to specify the rangecount in the supplied descriptor. Update the storvsc driver to reflect this new approach. Cc: <stable@vger.kernel.org> # 6.1.x Signed-off-by: Michael Kelley <mhklinux@outlook.com> Link: https://patch.msgid.link/20250513000604.1396-2-mhklinux@outlook.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> |
||
|
Linus Torvalds
|
546bce5792 |
Merge tag 'tpmdd-next-6.15-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/jarkko/linux-tpmdd
Pull tpm fixes from Jarkko Sakkinen: "A few last minute fixes for v6.15" * tag 'tpmdd-next-6.15-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/jarkko/linux-tpmdd: tpm: tis: Double the timeout B to 4s char: tpm: tpm-buf: Add sanity check fallback in read helpers tpm: Mask TPM RC in tpm2_start_auth_session() |
||
 Hariprasad Kelam
|
bf449f35e7 |
octeontx2-af: Fix CGX Receive counters
Each CGX block supports 4 logical MACs (LMACS). Receive
counters CGX_CMR_RX_STAT0-8 are per LMAC and CGX_CMR_RX_STAT9-12
are per CGX.
Due a bug in previous patch, stale Per CGX counters values observed.
Fixes:
|
||
 Bo-Cun Chen
|
1bdea6fad6 |
net: ethernet: mtk_eth_soc: fix typo for declaration MT7988 ESW capability
Since MTK_ESW_BIT is a bit number rather than a bitmap, it causes
MTK_HAS_CAPS to produce incorrect results. This leads to the ETH
driver not declaring MAC capabilities correctly for the MT7988 ESW.
Fixes:
|
||
 Jiawen Wu
|
09e76365ba |
net: libwx: Fix FW mailbox unknown command
For the new SW-FW interaction, missing the error return if there is an
unknown command. It causes the driver to mistakenly believe that the
interaction is complete. This problem occurs when new driver is paired
with old firmware, which does not support the new mailbox commands.
Fixes:
|
||
|
Jiawen Wu
|
42efa358f0 |
net: libwx: Fix FW mailbox reply timeout
For the new SW-FW interaction, the timeout waiting for the firmware to
return is too short. So that some mailbox commands cannot be completed.
Use the 'timeout' parameter instead of fixed timeout value for flexible
configuration.
Fixes:
|
||
|
Jiawen Wu
|
141a8dec88 |
net: txgbe: Fix to calculate EEPROM checksum for AML devices
In the new firmware version, the shadow ram reserves some space to store
I2C information, so the checksum calculation needs to skip this section.
Otherwise, the driver will fail to probe because the invalid EEPROM
checksum.
Fixes:
|
||
|
Subbaraya Sundeep
|
865ab24613 |
octeontx2-pf: macsec: Fix incorrect max transmit size in TX secy
MASCEC hardware block has a field called maximum transmit size for
TX secy. Max packet size going out of MCS block has be programmed
taking into account full packet size which has L2 header,SecTag
and ICV. MACSEC offload driver is configuring max transmit size as
macsec interface MTU which is incorrect. Say with 1500 MTU of real
device, macsec interface created on top of real device will have MTU of
1468(1500 - (SecTag + ICV)). This is causing packets from macsec
interface of size greater than or equal to 1468 are not getting
transmitted out because driver programmed max transmit size as 1468
instead of 1514(1500 + ETH_HDR_LEN).
Fixes:
|
||
|
Jakub Kicinski
|
f3dd5fb2fa |
netlink: specs: tc: all actions are indexed arrays
Some TC filters have actions listed as indexed arrays of nests
and some as just nests. They are all indexed arrays, the handling
is common across filters.
Fixes:
|
||
|
Jakub Kicinski
|
a9fb87b8b8 |
netlink: specs: tc: fix a couple of attribute names
Fix up spelling of two attribute names. These are clearly typoes
and will prevent C codegen from working. Let's treat this as
a fix to get the correction into users' hands ASAP, and prevent
anyone depending on the wrong names.
Fixes:
|
||
 Michal Suchanek
|
2f661f71fd |
tpm: tis: Double the timeout B to 4s
With some Infineon chips the timeouts in tpm_tis_send_data (both B and
C) can reach up to about 2250 ms.
Timeout C is retried since
commit
|
||
 Purva Yeshi
|
32d495b384 |
char: tpm: tpm-buf: Add sanity check fallback in read helpers
Fix Smatch-detected issue: drivers/char/tpm/tpm-buf.c:208 tpm_buf_read_u8() error: uninitialized symbol 'value'. drivers/char/tpm/tpm-buf.c:225 tpm_buf_read_u16() error: uninitialized symbol 'value'. drivers/char/tpm/tpm-buf.c:242 tpm_buf_read_u32() error: uninitialized symbol 'value'. Zero-initialize the return values in tpm_buf_read_u8(), tpm_buf_read_u16(), and tpm_buf_read_u32() to guard against uninitialized data in case of a boundary overflow. Add defensive initialization ensures the return values are always defined, preventing undefined behavior if the unexpected happens. Signed-off-by: Purva Yeshi <purvayeshi550@gmail.com> Reviewed-by: Stefano Garzarella <sgarzare@redhat.com> Reviewed-by: Jarkko Sakkinen <jarkko@kernel.org> Signed-off-by: Jarkko Sakkinen <jarkko@kernel.org> |
||
 Jarkko Sakkinen
|
539fbab378 |
tpm: Mask TPM RC in tpm2_start_auth_session()
tpm2_start_auth_session() does not mask TPM RC correctly from the callers:
[ 28.766528] tpm tpm0: A TPM error (2307) occurred start auth session
Process TPM RCs inside tpm2_start_auth_session(), and map them to POSIX
error codes.
Cc: stable@vger.kernel.org # v6.10+
Fixes:
|
||
|
Linus Torvalds
|
74a6325597 |
Merge tag 'for-6.15-rc6-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux
Pull btrfs fixes from David Sterba: - fix potential endless loop when discarding a block group when disabling discard - reinstate message when setting a large value of mount option 'commit' - fix a folio leak when async extent submission fails * tag 'for-6.15-rc6-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux: btrfs: add back warning for mount option commit values exceeding 300 btrfs: fix folio leak in submit_one_async_extent() btrfs: fix discard worker infinite loop after disabling discard |
||
|
Linus Torvalds
|
c94d59a126 |
Merge tag 'trace-v6.15-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace
Pull tracing fixes from Steven Rostedt: - Fix sample code that uses trace_array_printk() The sample code for in kernel use of trace_array (that creates an instance for use within the kernel) and shows how to use trace_array_printk() that writes into the created instance, used trace_printk_init_buffers(). But that function is used to initialize normal trace_printk() and produces the NOTICE banner which is not needed for use of trace_array_printk(). The function to initialize that is trace_array_init_printk() that takes the created trace array instance as a parameter. Update the sample code to reflect the proper usage. - Fix preemption count output for stacktrace event The tracing buffer shows the preempt count level when an event executes. Because writing the event itself disables preemption, this needs to be accounted for when recording. The stacktrace event did not account for this so the output of the stacktrace event showed preemption was disabled while the event that triggered the stacktrace shows preemption is enabled and this leads to confusion. Account for preemption being disabled for the stacktrace event. The same happened for stack traces triggered by function tracer. - Fix persistent ring buffer when trace_pipe is used The ring buffer swaps the reader page with the next page to read from the write buffer when trace_pipe is used. If there's only a page of data in the ring buffer, this swap will cause the "commit" pointer (last data written) to be on the reader page. If more data is written to the buffer, it is added to the reader page until it falls off back into the write buffer. If the system reboots and the commit pointer is still on the reader page, even if new data was written, the persistent buffer validator will miss finding the commit pointer because it only checks the write buffer and does not check the reader page. This causes the validator to fail the validation and clear the buffer, where the new data is lost. There was a check for this, but it checked the "head pointer", which was incorrect, because the "head pointer" always stays on the write buffer and is the next page to swap out for the reader page. Fix the logic to catch this case and allow the user to still read the data after reboot. * tag 'trace-v6.15-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace: ring-buffer: Fix persistent buffer when commit page is the reader page ftrace: Fix preemption accounting for stacktrace filter command ftrace: Fix preemption accounting for stacktrace trigger command tracing: samples: Initialize trace_array_printk() with the correct function |
||
 Steven Rostedt
|
1d6c39c89f |
ring-buffer: Fix persistent buffer when commit page is the reader page
The ring buffer is made up of sub buffers (sometimes called pages as they
are by default PAGE_SIZE). It has the following "pages":
"tail page" - this is the page that the next write will write to
"head page" - this is the page that the reader will swap the reader page with.
"reader page" - This belongs to the reader, where it will swap the head
page from the ring buffer so that the reader does not
race with the writer.
The writer may end up on the "reader page" if the ring buffer hasn't
written more than one page, where the "tail page" and the "head page" are
the same.
The persistent ring buffer has meta data that points to where these pages
exist so on reboot it can re-create the pointers to the cpu_buffer
descriptor. But when the commit page is on the reader page, the logic is
incorrect.
The check to see if the commit page is on the reader page checked if the
head page was the reader page, which would never happen, as the head page
is always in the ring buffer. The correct check would be to test if the
commit page is on the reader page. If that's the case, then it can exit
out early as the commit page is only on the reader page when there's only
one page of data in the buffer. There's no reason to iterate the ring
buffer pages to find the "commit page" as it is already found.
To trigger this bug:
# echo 1 > /sys/kernel/tracing/instances/boot_mapped/events/syscalls/sys_enter_fchownat/enable
# touch /tmp/x
# chown sshd /tmp/x
# reboot
On boot up, the dmesg will have:
Ring buffer meta [0] is from previous boot!
Ring buffer meta [1] is from previous boot!
Ring buffer meta [2] is from previous boot!
Ring buffer meta [3] is from previous boot!
Ring buffer meta [4] commit page not found
Ring buffer meta [5] is from previous boot!
Ring buffer meta [6] is from previous boot!
Ring buffer meta [7] is from previous boot!
Where the buffer on CPU 4 had a "commit page not found" error and that
buffer is cleared and reset causing the output to be empty and the data lost.
When it works correctly, it has:
# cat /sys/kernel/tracing/instances/boot_mapped/trace_pipe
<...>-1137 [004] ..... 998.205323: sys_enter_fchownat: __syscall_nr=0x104 (260) dfd=0xffffff9c (4294967196) filename=(0xffffc90000a0002c) user=0x3e8 (1000) group=0xffffffff (4294967295) flag=0x0 (0
Cc: stable@vger.kernel.org
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Link: https://lore.kernel.org/20250513115032.3e0b97f7@gandalf.local.home
Fixes:
|
||
 pengdonglin
|
11aff32439 |
ftrace: Fix preemption accounting for stacktrace filter command
The preemption count of the stacktrace filter command to trace ksys_read
is consistently incorrect:
$ echo ksys_read:stacktrace > set_ftrace_filter
<...>-453 [004] ...1. 38.308956: <stack trace>
=> ksys_read
=> do_syscall_64
=> entry_SYSCALL_64_after_hwframe
The root cause is that the trace framework disables preemption when
invoking the filter command callback in function_trace_probe_call:
preempt_disable_notrace();
probe_ops->func(ip, parent_ip, probe_opsbe->tr, probe_ops, probe->data);
preempt_enable_notrace();
Use tracing_gen_ctx_dec() to account for the preempt_disable_notrace(),
which will output the correct preemption count:
$ echo ksys_read:stacktrace > set_ftrace_filter
<...>-410 [006] ..... 31.420396: <stack trace>
=> ksys_read
=> do_syscall_64
=> entry_SYSCALL_64_after_hwframe
Cc: stable@vger.kernel.org
Fixes:
|
||
|
pengdonglin
|
e333332657 |
ftrace: Fix preemption accounting for stacktrace trigger command
When using the stacktrace trigger command to trace syscalls, the
preemption count was consistently reported as 1 when the system call
event itself had 0 (".").
For example:
root@ubuntu22-vm:/sys/kernel/tracing/events/syscalls/sys_enter_read
$ echo stacktrace > trigger
$ echo 1 > enable
sshd-416 [002] ..... 232.864910: sys_read(fd: a, buf: 556b1f3221d0, count: 8000)
sshd-416 [002] ...1. 232.864913: <stack trace>
=> ftrace_syscall_enter
=> syscall_trace_enter
=> do_syscall_64
=> entry_SYSCALL_64_after_hwframe
The root cause is that the trace framework disables preemption in __DO_TRACE before
invoking the trigger callback.
Use the tracing_gen_ctx_dec() that will accommodate for the increase of
the preemption count in __DO_TRACE when calling the callback. The result
is the accurate reporting of:
sshd-410 [004] ..... 210.117660: sys_read(fd: 4, buf: 559b725ba130, count: 40000)
sshd-410 [004] ..... 210.117662: <stack trace>
=> ftrace_syscall_enter
=> syscall_trace_enter
=> do_syscall_64
=> entry_SYSCALL_64_after_hwframe
Cc: stable@vger.kernel.org
Fixes:
|
||
|
Linus Torvalds
|
1a80a098c6 |
Merge tag 'execve-v6.15-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux
Pull execve fix from Kees Cook: "This fixes a corner case for ASLR-disabled static-PIE brk collision with vdso allocations: - binfmt_elf: Move brk for static PIE even if ASLR disabled" * tag 'execve-v6.15-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux: binfmt_elf: Move brk for static PIE even if ASLR disabled |
||
|
Linus Torvalds
|
00f281fd9d |
Merge tag 'soc-fixes-6.15-2' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull SoC fixes from Arnd Bergmann:
"These all address issues in devicetree files:
- The Rockchip rk3588j are now limited the same way as the vendor
kernel, to allow room for the industrial-grade temperature ranges.
- Seven more Rockchip fixes address minor issues with specific boards
- Invalid clk controller references in multiple amlogic chips, plus
one accidentally disabled audio on clock
- Two devicetree fixes for i.MX8MP boards, both for incorrect
regulator settings
- A power domain change for apple laptop touchbar, fixing
suspend/resume problems
- An incorrect DMA controller setting for sophgo cv18xx chips"
* tag 'soc-fixes-6.15-2' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc:
arm64: dts: amazon: Fix simple-bus node name schema warnings
MAINTAINERS: delete email for Shiraz Hashim
arm64: dts: imx8mp-var-som: Fix LDO5 shutdown causing SD card timeout
arm64: dts: imx8mp: use 800MHz NoC OPP for nominal drive mode
arm64: dts: amlogic: dreambox: fix missing clkc_audio node
riscv: dts: sophgo: fix DMA data-width configuration for CV18xx
arm64: dts: rockchip: fix Sige5 RTC interrupt pin
arm64: dts: rockchip: Assign RT5616 MCLK rate on rk3588-friendlyelec-cm3588
arm64: dts: rockchip: Align wifi node name with bindings in CB2
arm64: dts: amlogic: g12: fix reference to unknown/untested PWM clock
arm64: dts: amlogic: gx: fix reference to unknown/untested PWM clock
ARM: dts: amlogic: meson8b: fix reference to unknown/untested PWM clock
ARM: dts: amlogic: meson8: fix reference to unknown/untested PWM clock
arm64: dts: apple: touchbar: Mark ps_dispdfr_be as always-on
mailmap: Update email for Asahi Lina
arm64: dts: rockchip: Fix mmc-pwrseq clock name on rock-pi-4
arm64: dts: rockchip: Use "regulator-fixed" for btreg on px30-engicam for vcc3v3-btreg
arm64: dts: rockchip: Add pinmuxing for eMMC on QNAP TS433
arm64: dts: rockchip: Remove overdrive-mode OPPs from RK3588J SoC dtsi
arm64: dts: rockchip: Allow Turing RK1 cooling fan to spin down
|
||
|
Hariprasad Kelam
|
314007549d |
octeontx2-pf: Fix ethtool support for SDP representors
The hardware supports multiple MAC types, including RPM, SDP, and LBK.
However, features such as link settings and pause frames are only available
on RPM MAC, and not supported on SDP or LBK.
This patch updates the ethtool operations logic accordingly to reflect
this behavior.
Fixes:
|
||
 Abdun Nihaal
|
9d8a99c5a7 |
qlcnic: fix memory leak in qlcnic_sriov_channel_cfg_cmd()
In one of the error paths in qlcnic_sriov_channel_cfg_cmd(), the memory
allocated in qlcnic_sriov_alloc_bc_mbx_args() for mailbox arguments is
not freed. Fix that by jumping to the error path that frees them, by
calling qlcnic_free_mbx_args(). This was found using static analysis.
Fixes:
|
||
 Vladimir Oltean
|
d5c17e3654 |
docs: networking: timestamping: improve stacked PHC sentence
The first paragraph makes no grammatical sense. I suppose a portion of
the intended sentece is missing: "[The challenge with ] stacked PHCs
(...) is that they uncover bugs".
Rephrase, and at the same time simplify the structure of the sentence a
little bit, it is not easy to follow.
Fixes:
|
||
 Carolina Jubran
|
588431474e |
net/mlx5e: Disable MACsec offload for uplink representor profile
MACsec offload is not supported in switchdev mode for uplink
representors. When switching to the uplink representor profile, the
MACsec offload feature must be cleared from the netdevice's features.
If left enabled, attempts to add offloads result in a null pointer
dereference, as the uplink representor does not support MACsec offload
even though the feature bit remains set.
Clear NETIF_F_HW_MACSEC in mlx5e_fix_uplink_rep_features().
Kernel log:
Oops: general protection fault, probably for non-canonical address 0xdffffc000000000f: 0000 [#1] SMP KASAN
KASAN: null-ptr-deref in range [0x0000000000000078-0x000000000000007f]
CPU: 29 UID: 0 PID: 4714 Comm: ip Not tainted 6.14.0-rc4_for_upstream_debug_2025_03_02_17_35 #1
Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.16.0-0-gd239552ce722-prebuilt.qemu.org 04/01/2014
RIP: 0010:__mutex_lock+0x128/0x1dd0
Code: d0 7c 08 84 d2 0f 85 ad 15 00 00 8b 35 91 5c fe 03 85 f6 75 29 49 8d 7e 60 48 b8 00 00 00 00 00 fc ff df 48 89 fa 48 c1 ea 03 <80> 3c 02 00 0f 85 a6 15 00 00 4d 3b 76 60 0f 85 fd 0b 00 00 65 ff
RSP: 0018:ffff888147a4f160 EFLAGS: 00010206
RAX: dffffc0000000000 RBX: 0000000000000000 RCX: 0000000000000001
RDX: 000000000000000f RSI: 0000000000000000 RDI: 0000000000000078
RBP: ffff888147a4f2e0 R08: ffffffffa05d2c19 R09: 0000000000000000
R10: 0000000000000001 R11: 0000000000000000 R12: 0000000000000000
R13: dffffc0000000000 R14: 0000000000000018 R15: ffff888152de0000
FS: 00007f855e27d800(0000) GS:ffff88881ee80000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 00000000004e5768 CR3: 000000013ae7c005 CR4: 0000000000372eb0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000fffe07f0 DR7: 0000000000000400
Call Trace:
<TASK>
? die_addr+0x3d/0xa0
? exc_general_protection+0x144/0x220
? asm_exc_general_protection+0x22/0x30
? mlx5e_macsec_add_secy+0xf9/0x700 [mlx5_core]
? __mutex_lock+0x128/0x1dd0
? lockdep_set_lock_cmp_fn+0x190/0x190
? mlx5e_macsec_add_secy+0xf9/0x700 [mlx5_core]
? mutex_lock_io_nested+0x1ae0/0x1ae0
? lock_acquire+0x1c2/0x530
? macsec_upd_offload+0x145/0x380
? lockdep_hardirqs_on_prepare+0x400/0x400
? kasan_save_stack+0x30/0x40
? kasan_save_stack+0x20/0x40
? kasan_save_track+0x10/0x30
? __kasan_kmalloc+0x77/0x90
? __kmalloc_noprof+0x249/0x6b0
? genl_family_rcv_msg_attrs_parse.constprop.0+0xb5/0x240
? mlx5e_macsec_add_secy+0xf9/0x700 [mlx5_core]
mlx5e_macsec_add_secy+0xf9/0x700 [mlx5_core]
? mlx5e_macsec_add_rxsa+0x11a0/0x11a0 [mlx5_core]
macsec_update_offload+0x26c/0x820
? macsec_set_mac_address+0x4b0/0x4b0
? lockdep_hardirqs_on_prepare+0x284/0x400
? _raw_spin_unlock_irqrestore+0x47/0x50
macsec_upd_offload+0x2c8/0x380
? macsec_update_offload+0x820/0x820
? __nla_parse+0x22/0x30
? genl_family_rcv_msg_attrs_parse.constprop.0+0x15e/0x240
genl_family_rcv_msg_doit+0x1cc/0x2a0
? genl_family_rcv_msg_attrs_parse.constprop.0+0x240/0x240
? cap_capable+0xd4/0x330
genl_rcv_msg+0x3ea/0x670
? genl_family_rcv_msg_dumpit+0x2a0/0x2a0
? lockdep_set_lock_cmp_fn+0x190/0x190
? macsec_update_offload+0x820/0x820
netlink_rcv_skb+0x12b/0x390
? genl_family_rcv_msg_dumpit+0x2a0/0x2a0
? netlink_ack+0xd80/0xd80
? rwsem_down_read_slowpath+0xf90/0xf90
? netlink_deliver_tap+0xcd/0xac0
? netlink_deliver_tap+0x155/0xac0
? _copy_from_iter+0x1bb/0x12c0
genl_rcv+0x24/0x40
netlink_unicast+0x440/0x700
? netlink_attachskb+0x760/0x760
? lock_acquire+0x1c2/0x530
? __might_fault+0xbb/0x170
netlink_sendmsg+0x749/0xc10
? netlink_unicast+0x700/0x700
? __might_fault+0xbb/0x170
? netlink_unicast+0x700/0x700
__sock_sendmsg+0xc5/0x190
____sys_sendmsg+0x53f/0x760
? import_iovec+0x7/0x10
? kernel_sendmsg+0x30/0x30
? __copy_msghdr+0x3c0/0x3c0
? filter_irq_stacks+0x90/0x90
? stack_depot_save_flags+0x28/0xa30
___sys_sendmsg+0xeb/0x170
? kasan_save_stack+0x30/0x40
? copy_msghdr_from_user+0x110/0x110
? do_syscall_64+0x6d/0x140
? lock_acquire+0x1c2/0x530
? __virt_addr_valid+0x116/0x3b0
? __virt_addr_valid+0x1da/0x3b0
? lock_downgrade+0x680/0x680
? __delete_object+0x21/0x50
__sys_sendmsg+0xf7/0x180
? __sys_sendmsg_sock+0x20/0x20
? kmem_cache_free+0x14c/0x4e0
? __x64_sys_close+0x78/0xd0
do_syscall_64+0x6d/0x140
entry_SYSCALL_64_after_hwframe+0x4b/0x53
RIP: 0033:0x7f855e113367
Code: 0e 00 f7 d8 64 89 02 48 c7 c0 ff ff ff ff eb b9 0f 1f 00 f3 0f 1e fa 64 8b 04 25 18 00 00 00 85 c0 75 10 b8 2e 00 00 00 0f 05 <48> 3d 00 f0 ff ff 77 51 c3 48 83 ec 28 89 54 24 1c 48 89 74 24 10
RSP: 002b:00007ffd15e90c88 EFLAGS: 00000246 ORIG_RAX: 000000000000002e
RAX: ffffffffffffffda RBX: 0000000000000002 RCX: 00007f855e113367
RDX: 0000000000000000 RSI: 00007ffd15e90cf0 RDI: 0000000000000004
RBP: 00007ffd15e90dbc R08: 0000000000000028 R09: 000000000045d100
R10: 00007f855e011dd8 R11: 0000000000000246 R12: 0000000000000019
R13: 0000000067c6b785 R14: 00000000004a1e80 R15: 0000000000000000
</TASK>
Modules linked in: 8021q garp mrp sch_ingress openvswitch nsh mlx5_ib mlx5_fwctl mlx5_dpll mlx5_core rpcrdma rdma_ucm ib_iser libiscsi scsi_transport_iscsi ib_umad rdma_cm ib_ipoib iw_cm ib_cm ib_uverbs ib_core xt_conntrack xt_MASQUERADE nf_conntrack_netlink nfnetlink xt_addrtype iptable_nat nf_nat br_netfilter rpcsec_gss_krb5 auth_rpcgss oid_registry overlay zram zsmalloc fuse [last unloaded: mlx5_core]
---[ end trace 0000000000000000 ]---
Fixes:
|
||
 Konstantin Shkolnyy
|
7fd7ad6f36 |
vsock/test: Fix occasional failure in SIOCOUTQ tests
These tests:
"SOCK_STREAM ioctl(SIOCOUTQ) 0 unsent bytes"
"SOCK_SEQPACKET ioctl(SIOCOUTQ) 0 unsent bytes"
output: "Unexpected 'SIOCOUTQ' value, expected 0, got 64 (CLIENT)".
They test that the SIOCOUTQ ioctl reports 0 unsent bytes after the data
have been received by the other side. However, sometimes there is a delay
in updating this "unsent bytes" counter, and the test fails even though
the counter properly goes to 0 several milliseconds later.
The delay occurs in the kernel because the used buffer notification
callback virtio_vsock_tx_done(), called upon receipt of the data by the
other side, doesn't update the counter itself. It delegates that to
a kernel thread (via vsock->tx_work). Sometimes that thread is delayed
more than the test expects.
Change the test to poll SIOCOUTQ until it returns 0 or a timeout occurs.
Signed-off-by: Konstantin Shkolnyy <kshk@linux.ibm.com>
Reviewed-by: Stefano Garzarella <sgarzare@redhat.com>
Fixes:
|