A new step has been added to Bspec with respect to the C10 PHY, which
instructs the driver to toggle powerdown value for boths PHY lanes to P0
and then P2 when driving an HDMI connector. This update in the Bspec
reflects the changes required by Wa_14026084006, so document it.
Note that, unlike other display workarounds, this one is actually tied
to the C10 PHY and not to a specific display IP. As such, let's just
document it in intel_cx0_phy.c instead of adding it to
intel_display_wa.c.
Bspec: 64568, 74489
Reviewed-by: Dnyaneshwar Bhadane <dnyaneshwar.bhadane@intel.com>
Link: https://patch.msgid.link/20251216-wa_14026084006-c10-hdmi-toggle-powerdown-v1-2-08677b03e2f1@intel.com
Signed-off-by: Gustavo Sousa <gustavo.sousa@intel.com>
The pipe joiner maximum compressed BPP must be limited based on the pipe
joiner memory size and BW, do that for all DP outputs by adjusting the
max compressed BPP value already in
intel_dp_compute_config_link_bpp_limits() (which is used by all output
types).
This way the BPP doesn't need to be adjusted in
dsc_compute_compressed_bpp() (called for DP-SST after the above limits
were computed already), so remove the adjustment from there.
Reviewed-by: Luca Coelho <luciano.coelho@intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Link: https://patch.msgid.link/20251215192357.172201-13-imre.deak@intel.com
A DSC compressed stream requires FEC (except for eDP), which has a BW
overhead on non-UHBR links that must be accounted for explicitly. Do
that during computing the required BW.
Note that the overhead doesn't need to be accounted for on UHBR links
where FEC is always enabled and so the corresponding overhead is part of
the channel coding efficiency instead (i.e. the overhead is part of the
available vs. the required BW).
Reviewed-by: Luca Coelho <luciano.coelho@intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Link: https://patch.msgid.link/20251215192357.172201-12-imre.deak@intel.com
Use intel_dp_effective_data_rate() to calculate the required link BW for
compressed streams on non-UHBR DP-SST links. This ensures that the BW is
calculated the same way for all DP output types and DSC/non-DSC modes,
during mode validation as well as during state computation.
This approach also allows for accounting with BW overhead due to DSC,
FEC being enabled on a link. Acounting for these will be added by
follow-up changes.
Reviewed-by: Luca Coelho <luciano.coelho@intel.com>
Reviewed-by: Vinod Govindapillai <vinod.govindapillai@intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Link: https://patch.msgid.link/20251215192357.172201-10-imre.deak@intel.com
Use intel_dp_effective_data_rate() to calculate the required link BW for
eDP, DP-SST and MST links. This ensures that the BW is calculated the
same way for all DP output types, during mode validation as well as
during state computation. This approach also allows for accounting with
BW overheads due to the SSC, DSC, FEC being enabled on a link, as well
as due to the MST symbol alignment on the link. Accounting for these
overheads will be added by follow-up changes.
This way also computes the stream BW on a UHBR link correctly, using the
corresponding symbol size to effective data size ratio (i.e. ~97% link
BW utilization for UHBR vs. only ~80% for non-UHBR).
Reviewed-by: Luca Coelho <luciano.coelho@intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Link: https://patch.msgid.link/20251215192357.172201-9-imre.deak@intel.com
The encoder state computation should use the
drm_display_mode::crtc_clock member, instead of the clock member, the
former one possibly having a necessary adjustment wrt. to the latter
due to driver specific constraints. In practice the two values should
not differ at spots changed in this patch, since only MSO and 3D modes
would make them different, neither MSO or 3D relevant here, but still
use the expected crtc_clock version for consistency.
Reviewed-by: Luca Coelho <luciano.coelho@intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Link: https://patch.msgid.link/20251215192357.172201-6-imre.deak@intel.com
Convert intel_dp_output_bpp() and intel_dp_mode_min_output_bpp() to
return an x16 fixed point bpp value, as this value will be always the
link BPP (either compressed or uncompressed) tracked in the same x16
fixed point format.
While at it rename
intel_dp_output_bpp() to intel_dp_output_format_link_bpp_x16() and
intel_dp_mode_min_output_bpp() to intel_dp_mode_min_link_bpp_x16() to
better reflect that these functions return an x16 link BPP value
specific to a particular output format or mode.
Also rename intel_dp_output_bpp()'s bpp parameter to pipe_bpp, to
clarify which kind of (pipe vs. link) BPP the parameter is.
Reviewed-by: Luca Coelho <luciano.coelho@intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Link: https://patch.msgid.link/20251215192357.172201-5-imre.deak@intel.com
Switch error injection testing from i915_inject_probe_failure
to ALLOW_ERROR_INJECTION. Here taken out calls to
i915_inject_probe_failure and changed to use
ALLOW_ERROR_INJECTION for the same functions.
Below functions are dropped from testing since I
couldn't hit those at module bind time, testing
these would just fail the tests. To include these
in test would need to find way to cause resetting in i915
which would trigger these:
intel_gvt_init
intel_wopcm_init
intel_uc_fw_upload
intel_gt_init with expected -EIO (-EINVAL is tested)
lrc_init_wa_ctx
intel_huc_auth
guc_check_version_range
intel_uc_fw_fetch
uc_fw_xfer
__intel_uc_reset_hw
guc_enable_communication
uc_init_wopcm
..and all stages of __force_fw_fetch_failures
Signed-off-by: Juha-Pekka Heikkila <juhapekka.heikkila@gmail.com>
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Mika Kahola <mika.kahola@intel.com>
Link: https://patch.msgid.link/20251216080754.221974-2-juhapekka.heikkila@gmail.com
Commit 469c1c9eb6 ("kernel-doc: Issue warnings that were silently
discarded") started emitting warnings for cases that were previously
silently discarded. One such case is in intel_wakeref.h:
Warning: drivers/gpu/drm/i915/intel_wakeref.h:156 expecting prototype
for __intel_wakeref_put(). Prototype was for INTEL_WAKEREF_PUT_ASYNC()
instead
Arguably kernel-doc should be able to handle this, as it's valid C, but
having the flags defined between the function declarator and the body is
just asking for trouble. Move the INTEL_WAKEREF_PUT_* macros away from
there, making kernel-doc's life easier.
While at it, reduce the unnecessary abstraction levels by removing the
enum, and append _MASK to INTEL_WAKEREF_PUT_DELAY for clarity.
Cc: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Cc: Jonathan Corbet <corbet@lwn.net>
Acked-by: Randy Dunlap <rdunlap@infradead.org>
Tested-by: Randy Dunlap <rdunlap@infradead.org>
Link: https://patch.msgid.link/20251215120908.3515578-1-jani.nikula@intel.com
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Pull SCSI fixes from James Bottomley:
"The only core fix is in doc; all the others are in drivers, with the
biggest impacts in libsas being the rollback on error handling and in
ufs coming from a couple of error handling fixes, one causing a crash
if it's activated before scanning and the other fixing W-LUN
resumption"
* tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi:
scsi: ufs: qcom: Fix confusing cleanup.h syntax
scsi: libsas: Add rollback handling when an error occurs
scsi: device_handler: Return error pointer in scsi_dh_attached_handler_name()
scsi: ufs: core: Fix a deadlock in the frequency scaling code
scsi: ufs: core: Fix an error handler crash
scsi: Revert "scsi: libsas: Fix exp-attached device scan after probe failure scanned in again after probe failed"
scsi: ufs: core: Fix RPMB link error by reversing Kconfig dependencies
scsi: qla4xxx: Use time conversion macros
scsi: qla2xxx: Enable/disable IRQD_NO_BALANCING during reset
scsi: ipr: Enable/disable IRQD_NO_BALANCING during reset
scsi: imm: Fix use-after-free bug caused by unfinished delayed work
scsi: target: sbp: Remove KMSG_COMPONENT macro
scsi: core: Correct documentation for scsi_device_quiesce()
scsi: mpi3mr: Prevent duplicate SAS/SATA device entries in channel 1
scsi: target: Reset t_task_cdb pointer in error case
scsi: ufs: core: Fix EH failure after W-LUN resume error
Pull ceph updates from Ilya Dryomov:
"We have a patch that adds an initial set of tracepoints to the MDS
client from Max, a fix that hardens osdmap parsing code from myself
(marked for stable) and a few assorted fixups"
* tag 'ceph-for-6.19-rc1' of https://github.com/ceph/ceph-client:
rbd: stop selecting CRC32, CRYPTO, and CRYPTO_AES
ceph: stop selecting CRC32, CRYPTO, and CRYPTO_AES
libceph: make decode_pool() more resilient against corrupted osdmaps
libceph: Amend checking to fix `make W=1` build breakage
ceph: Amend checking to fix `make W=1` build breakage
ceph: add trace points to the MDS client
libceph: fix log output race condition in OSD client
Pull tomoyo update from Tetsuo Handa:
"Trivial optimization"
* tag 'tomoyo-pr-20251212' of git://git.code.sf.net/p/tomoyo/tomoyo:
tomoyo: Use local kmap in tomoyo_dump_page()
Pull CPU hotplug fix from Ingo Molnar:
- Fix CPU hotplug callbacks to disable interrupts on UP kernels
* tag 'smp-urgent-2025-12-12' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
cpu: Make atomic hotplug callbacks run with interrupts disabled on UP
Pull irq fixes from Ingo Molnar:
- Fix error code in the irqchip/mchp-eic driver
- Fix setup_percpu_irq() affinity assumptions
- Remove the unused irq_domain_add_tree() function
* tag 'irq-urgent-2025-12-12' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
irqchip/mchp-eic: Fix error code in mchp_eic_domain_alloc()
irqdomain: Delete irq_domain_add_tree()
genirq: Allow NULL affinity for setup_percpu_irq()
Pull misc core fixes from Ingo Molnar:
- Improve bug reporting
- Suppress W=1 format warning
- Improve rseq scalability on Clang builds
* tag 'core-urgent-2025-12-12' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
rseq: Always inline rseq_debug_syscall_return()
bug: Hush suggest-attribute=format for __warn_printf()
bug: Let report_bug_entry() provide the correct bugaddr
Pull misc updates from Andrew Morton:
"There are no significant series in this small merge. Please see the
individual changelogs for details"
[ Editor's note: it's mainly ocfs2 and a couple of random fixes ]
* tag 'mm-nonmm-stable-2025-12-11-11-47' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm:
mm: memfd_luo: add CONFIG_SHMEM dependency
mm: shmem: avoid build warning for CONFIG_SHMEM=n
ocfs2: fix memory leak in ocfs2_merge_rec_left()
ocfs2: invalidate inode if i_mode is zero after block read
ocfs2: avoid -Wflex-array-member-not-at-end warning
ocfs2: convert remaining read-only checks to ocfs2_emergency_state
ocfs2: add ocfs2_emergency_state helper and apply to setattr
checkpatch: add uninitialized pointer with __free attribute check
args: fix documentation to reflect the correct numbers
ocfs2: fix kernel BUG in ocfs2_find_victim_chain
liveupdate: luo_core: fix redundant bound check in luo_ioctl()
ocfs2: validate inline xattr size and entry count in ocfs2_xattr_ibody_list
fs/fat: remove unnecessary wrapper fat_max_cache()
ocfs2: replace deprecated strcpy with strscpy
ocfs2: check tl_used after reading it from trancate log inode
liveupdate: luo_file: don't use invalid list iterator
Pull more MM updates from Andrew Morton:
- "powerpc/pseries/cmm: two smaller fixes" (David Hildenbrand)
fixes a couple of minor things in ppc land
- "Improve folio split related functions" (Zi Yan)
some cleanups and minorish fixes in the folio splitting code
* tag 'mm-stable-2025-12-11-11-39' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm:
mm/damon/tests/core-kunit: avoid damos_test_commit stack warning
mm: vmscan: correct nr_requested tracing in scan_folios
MAINTAINERS: add idr core-api doc file to XARRAY
mm/hugetlb: fix incorrect error return from hugetlb_reserve_pages()
mm: fix CONFIG_STACK_GROWSUP typo in mm.h
mm/huge_memory: fix folio split stats counting
mm/huge_memory: make min_order_for_split() always return an order
mm/huge_memory: replace can_split_folio() with direct refcount calculation
mm/huge_memory: change folio_split_supported() to folio_check_splittable()
mm/sparse: fix sparse_vmemmap_init_nid_early definition without CONFIG_SPARSEMEM
powerpc/pseries/cmm: adjust BALLOON_MIGRATE when migrating pages
powerpc/pseries/cmm: call balloon_devinfo_init() also without CONFIG_BALLOON_COMPACTION
Brown paper bag time. This is a silly oversight where I missed to drop
the error condition checking to ensure we clean up on early error
returns. I have an internal unit testset coming up for this which will
catch all such issues going forward.
Reported-by: Chris Mason <clm@fb.com>
Reported-by: Jeff Layton <jlayton@kernel.org>
Fixes: 011703a9ac ("file: add FD_{ADD,PREPARE}()")
Signed-off-by: Christian Brauner <brauner@kernel.org>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Commit 7bfe3b8ea6 ("Drivers: hv: Introduce mshv_vtl driver") added a
new generated header file for the offsets into the mshv_vtl_cpu_context
structure to be used by the low-level assembly code. But it didn't add
the .gitignore file to go with it, so 'git status' and friends will
mention it.
Let's add the gitignore file before somebody thinks that generated
header should be committed.
Fixes: 7bfe3b8ea6 ("Drivers: hv: Introduce mshv_vtl driver")
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Pull more drm fixes from Dave Airlie:
"These are the enqueued fixes that ended up in our fixes branch,
nouveau mostly, along with some small fixes in other places.
plane:
- Handle IS_ERR vs NULL in drm_plane_create_hotspot_properties()
ttm:
- fix devcoredump for evicted bos
panel:
- Fix stack usage warning in novatek-nt35560
nouveau:
- alloc fwsec sb at boot to avoid s/r problems
- fix strcpy usage
- fix i2c encoder crash
bridge:
- Ignore spurious PLL_UNLOCK bit in ti-sn65dsi83
mgag200:
- Fix bigendian handling in mgag200
tilcdc:
- Fix probe failure in tilcdc"
* tag 'drm-fixes-2025-12-13' of https://gitlab.freedesktop.org/drm/kernel:
drm/mgag200: Fix big-endian support
drm/tilcdc: Fix removal actions in case of failed probe
drm/ttm: Avoid NULL pointer deref for evicted BOs
drm: nouveau: Replace sprintf() with sysfs_emit()
drm/nouveau: fix circular dep oops from vendored i2c encoder
drm/nouveau: refactor deprecated strcpy
drm/plane: Fix IS_ERR() vs NULL check in drm_plane_create_hotspot_properties()
drm/bridge: ti-sn65dsi83: ignore PLL_UNLOCK errors
drm/nouveau/gsp: Allocate fwsec-sb at boot
drm/panel: novatek-nt35560: avoid on-stack device structure
Pull drm fixes from Dave Airlie:
"This is the weekly fixes for what is in next tree, mostly amdgpu and
some i915, panthor and a core revert.
core:
- revert dumb bo 8 byte alignment
amdgpu:
- SI fix
- DC reduce stack usage
- HDMI fixes
- VCN 4.0.5 fix
- DP MST fix
- DC memory allocation fix
amdkfd:
- SVM fix
- Trap handler fix
- VGPR fixes for GC 11.5
i915:
- Fix format string truncation warning
- FIx runtime PM reference during fbdev BO creation
panthor:
- fix UAF
renesas:
- fix sync flag handling"
* tag 'drm-next-2025-12-13' of https://gitlab.freedesktop.org/drm/kernel:
Revert "drm/amd/display: Fix pbn to kbps Conversion"
drm/amd: Fix unbind/rebind for VCN 4.0.5
drm/i915: Fix format string truncation warning
drm/i915/fbdev: Hold runtime PM ref during fbdev BO creation
drm/amd/display: Improve HDMI info retrieval
drm/amdkfd: bump minimum vgpr size for gfx1151
drm/amd/display: shrink struct members
drm/amdkfd: Export the cwsr_size and ctl_stack_size to userspace
drm/amd/display: Refactor dml_core_mode_support to reduce stack frame
drm/amdgpu: don't attach the tlb fence for SI
drm/amd/display: Use GFP_ATOMIC in dc_create_plane_state()
drm/amdkfd: Trap handler support for expert scheduling mode
drm/amdkfd: Use huge page size to check split svm range alignment
drm/rcar-du: dsi: Handle both DRM_MODE_FLAG_N.SYNC and !DRM_MODE_FLAG_P.SYNC
drm/gem-shmem: revert the 8-byte alignment constraint
drm/gem-dma: revert the 8-byte alignment constraint
drm/panthor: Prevent potential UAF in group creation
Pull further i3c update from Alexandre Belloni:
"We are removing a legacy API callback and having this sooner rather
than later will help ensuring no one introduces a new driver using it.
I've also added patches removing the "__free(...) = NULL" pattern
because I'm sure we won't avoid people sending those following the
mailing list discussion..."
* tag 'i3c/for-6.19-2' of git://git.kernel.org/pub/scm/linux/kernel/git/i3c/linux:
i3c: adi: Fix confusing cleanup.h syntax
i3c: master: Fix confusing cleanup.h syntax
i3c: master: cleanup callback .priv_xfers()
i3c: master: switch to use new callback .i3c_xfers() from .priv_xfers()
Pull RTC updates from Alexandre Belloni:
"Subsystem:
- stop setting max_user_freq from the individual drivers as this has
not been hardware related for a while
New drivers:
- Andes ATCRTC100
- Apple SMC
- Nvidia VRS
Drivers:
- renesas-rtca3: add RZ/V2H support
- tegra: add ACPI support"
* tag 'rtc-6.19' of git://git.kernel.org/pub/scm/linux/kernel/git/abelloni/linux: (34 commits)
rtc: spacemit: MFD_SPACEMIT_P1 as dependencies
rtc: atcrtc100: Fix signedness bug in probe()
rtc: max31335: Fix ignored return value in set_alarm
rtc: gamecube: Check the return value of ioremap()
Documentation: ABI: testing: Fix "upto" typo in rtc-cdev
rtc: Add new rtc-macsmc driver for Apple Silicon Macs
dt-bindings: rtc: Add Apple SMC RTC
MAINTAINERS: drop unneeded file entry in NVIDIA VRS RTC DRIVER
rtc: isl12026: Add id_table
rtc: renesas-rtca3: Add support for multiple reset lines
dt-bindings: rtc: renesas,rz-rtca3: Add RZ/V2H support
rtc: tegra: Replace deprecated SIMPLE_DEV_PM_OPS
rtc: tegra: Add ACPI support
rtc: tegra: Use devm_clk_get_enabled() in probe
rtc: Kconfig: add MC34708 to mc13xxx help text
rtc: s35390a: use u8 instead of char for register buffer
rtc: nvvrs: add NVIDIA VRS RTC device driver
dt-bindings: rtc: Document NVIDIA VRS RTC
rtc: atcrtc100: Add ATCRTC100 RTC driver
MAINTAINERS: Add entry for ATCRTC100 RTC driver
...
Pull pwm fix from Uwe Kleine-König:
"Fix missing th1520 Kconfig dependencies
This tightens the dependency for the new pwm driver written in Rust to
make build bots and obviously also users happy"
* tag 'pwm/for-6.19-rc1-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/ukleinek/linux:
pwm: th1520: Fix missing Kconfig dependencies
Pull gpio updates from Bartosz Golaszewski:
- fix spinlock op type after conversion to lock guards
- fix a memory leak in error path in gpio-regmap
- Kconfig fixes in GPIO drivers
- add a GPIO ACPI quirk for Dell Precision 7780
- set of fixes for shared GPIO management
* tag 'gpio-fixes-for-v6.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux:
gpio: shared: make locking more fine-grained
gpio: shared: fix auxiliary device cleanup order
gpio: shared: check if a reference is populated before cleaning its resources
gpio: shared: fix NULL-pointer dereference in teardown path
gpio: shared: ignore disabled nodes when traversing the device-tree
gpiolib: acpi: Add quirk for Dell Precision 7780
gpio: tb10x: fix OF_GPIO dependency
gpio: qixis: select CONFIG_REGMAP_MMIO
gpio: regmap: Fix memleak in error path in gpio_regmap_register()
gpio: mmio: fix bad guard conversion
Pull PCI fix from Bjorn Helgaas:
- Initialize rzg3s_pcie_msi_irq() MSI status bitmap before use (Claudiu
Beznea)
* tag 'pci-v6.19-fixes-1' of git://git.kernel.org/pub/scm/linux/kernel/git/pci/pci:
PCI: rzg3s-host: Initialize MSI status bitmap before use
Gustavo Sousa
Imre Deak
Jani Nikula
Ankit Nautiyal
Juha-Pekka Heikkila
Jouni Högander
Rodrigo Vivi
Linus Torvalds
Christian Brauner