commit 1ec0e6b6f7 upstream.
Callers of migrate_pages() should adjust NR_MIGRATED_{ANON,FILE} for
isolations and putback of the folios. That for migration succeeded folios
is done by migrate_pages(), in migrate_folio_done(). That for MR_DEMOTION
reason is an exception though.
DAMOS_MIGRATE_{HOT,COLD} call migrate_pages() but mistakenly not doing the
stat adjustment. As a result, use of DAMOS_MIGRATE_{HOT,COLD} could
corrupt the stat. It could confuse too_many_isolated(), make compaction
and reclaim to behave in unexpected ways. The stat corruption can be
reproduced and confirmed using DAMON user-space tool [1] on NUMA systems,
like below.
$ numactl --hardware
available: 2 nodes (0-1)
[...]
$ sudo ./damo start --damos_action migrate_hot 1
$ sudo cat /proc/sys/vm/stat_refresh
$ sudo dmesg
[...]
[ 80.215554] vmstat_refresh: nr_isolated_anon -5578
[ 80.216842] vmstat_refresh: nr_isolated_file -34400
This issue was discovered [2] by Sashiko.
Link: https://lore.kernel.org/20260728140404.94476-1-sj@kernel.org
Link: https://github.com/damonitor/damo [1]
Link: https://lore.kernel.org/20260726164356.87940-1-sj@kernel.org [2]
Fixes: b51820ebea ("mm/damon/paddr: introduce DAMOS_MIGRATE_COLD action for demotion")
Signed-off-by: SJ Park <sj@kernel.org>
Cc: Honggyu Kim <honggyu.kim@sk.com>
Cc: Hyeongtak Ji <hyeongtak.ji@sk.com>
Cc: <stable@vger.kernel.org> # 6.11.x
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit a16fd3ad9d upstream.
Patch series "mm/damon: avoid division by zero from damos_quota_score()".
DAMON_SAMPLE_MTIER and DAMON_LRU_SORT allow the user to trigger division
by zero in damos_quota_score(). Avoid it by adding parameters validation
checks.
This patch (of 2):
damos_quota_score() can trigger division by zero if the target_value is
zero. DAMON_SAMPLE_MTIER lets users set the target_value via
node0_mem_{used,free}_bp parameters. It doesn't guard zero value case,
though. As a result, users can trigger division by zero. Fix the issue
by returning an error when the user tries to start DAMON with zero
node0_mem_{used,free}_bp parameter values.
DAMON_SAMPLE_MTIER is just a sample module, but the consequence is quite
bad. Also the zero node0_mem_free_bp parameter might look like a
reasonable setup to some users. Hence, the issue might really happen in
the real world.
One reliable way to reproduce the issue is like below:
# cd /sys/module/damon_sample_mtier/parameters
# echo 4096 > node0_start_addr
# echo 8192 > node0_end_addr
# echo 8192 > node1_start_addr
# echo 81920 > node1_end_addr
# echo 0 > node0_mem_free_bp
# echo Y > enabled
# dmesg -w
[...]
[18792.235916] Oops: divide error: 0000 [#1] SMP NOPTI
[...]
[18792.242787] RIP: 0010:damos_quota_score+0x6f/0x480
[...]
This issue was discovered [1] by Sashiko.
Link: https://lore.kernel.org/20260803134034.15217-1-sj@kernel.org
Link: https://lore.kernel.org/20260803134034.15217-2-sj@kernel.org
Link: https://lore.kernel.org/20260801202657.117135-1-sj@kernel.org [1]
Fixes: c5e67d40a1 ("samples/damon/mtier: add parameters for node0 memory usage")
Signed-off-by: SJ Park <sj@kernel.org>
Cc: <stable@vger.kernel.org> # 6.17.x
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 5deb65c34e upstream.
damon_pa_migrate() and damos_va_migrate() isolate folios into a local list
and then call damon_migrate_pages(). When target_nid is invalid
(including the scheme default NUMA_NO_NODE / -1), damon_migrate_pages()
returns early without putting the folios back to the LRU.
Callers then discard the list head while those folios remain isolated with
an extra reference taken by folio_isolate_lru(). The pages stay off the
LRU for as long as the mapping exists (anon active+inactive counts drop
while RSS does not), and the leftover references can pin the pages after
the mapping is gone.
Put the folios back on the invalid-nid path so ignored migration requests
still return them to the LRU.
Link: https://lore.kernel.org/20260726014815.1280757-1-dayou5941@163.com
Fixes: 7e6c313069 ("mm/damon/ops-common: ignore migration request to invalid nodes")
Assisted-by: Cursor:grok-4.5
Reviewed-by: SJ Park <sj@kernel.org>
Signed-off-by: liyouhong <liyouhong@kylinos.cn>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 91542863ab upstream.
In test_ringbuffer()'s out_free cleanup loop, the check
`!rb_threads[cpu]` only catches NULL entries and misses entries that
hold an ERR_PTR.
rb_threads[] is static, so unassigned slots are NULL. But when
kthread_run_on_cpu() fails for a cpu, it stores ERR_PTR(-ENOMEM) (or
-EINTR) in rb_threads[cpu] before the creation loop jumps to out_free.
That entry is non-NULL, so the old `!ptr` check does not break, and the
cleanup proceeds to call kthread_stop() on the ERR_PTR. kthread_stop()
then dereferences the bogus pointer, crashing the kernel during the
late_initcall self-test.
crash logs:
BUG: kernel NULL pointer dereference, address: 000000000000001c
Oops: 0002 [#1] SMP NOPTI
CPU: 1 PID: 1 Comm: swapper/0 Not tainted 7.2.0-rc6-dirty #7 PREEMPT(lazy)
RIP: 0010:kthread_stop+0x2e/0x220
RBX: fffffffffffffff4
CR2: 000000000000001c
Call Trace:
<TASK>
test_ringbuffer+0x1ec/0x650
do_one_initcall+0x6c/0x2c0
kernel_init_freeable+0x21d/0x420
kernel_init+0x15/0x1c0
ret_from_fork+0x21b/0x320
</TASK>
Kernel panic - not syncing: Fatal exception
Cc: stable@vger.kernel.org
Fixes: 64ed3a049e ("ring-buffer: make use of the helper function kthread_run_on_cpu()")
Link: https://patch.msgid.link/20260807154145.2846521-2-sh_def@163.com
Signed-off-by: Hui Su <sh_def@163.com>
Reviewed-by: Vincent Donnefort <vdonnefort@google.com>
Acked-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 6102ceb4ea upstream.
fastrpc_req_munmap_impl() is called to unmap any buffer. The buffer is
getting removed from the list after it is unmapped from DSP. This can
create potential race conditions if multiple threads invoke unmap
concurrently, where one thread may remove the entry from the list while
another thread's unmap operation is still ongoing.
Fix this by removing the buffer entry from the list before calling the
unmap operation. If the unmap fails, the entry is re-added to the list
so that userspace can retry the unmap, or alternatively, the buffer
will be cleaned up during device release when the DSP process is torn
down and all DSP-side mappings are freed along with remaining buffers
in the list.
Fixes: 2419e55e53 ("misc: fastrpc: add mmap/unmap support")
Cc: stable@kernel.org
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Signed-off-by: Ekansh Gupta <ekansh.gupta@oss.qualcomm.com>
Signed-off-by: Jianping Li <jianping.li@oss.qualcomm.com>
Signed-off-by: Srinivas Kandagatla <srini@kernel.org>
Link: https://patch.msgid.link/20260724223342.629168-3-srini@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 6829665d05 upstream.
rtw_cfg80211_monitor_if_xmit_entry() removes the radiotap header and
then reads the 802.11 frame control field without checking that a base
802.11 header remains.
The data path also pulls the calculated 802.11, QoS and SNAP header
span before confirming that the skb contains it. A truncated frame can
therefore cause out-of-bounds reads or leave insufficient data for the
Ethernet address writes.
Reject frames that do not contain the base 802.11 header and data
frames that do not contain their complete calculated header span.
Fixes: 554c0a3abf ("staging: Add rtl8723bs sdio wifi driver")
Cc: stable <stable@kernel.org>
Signed-off-by: Mariano Baragiola <mbaragiola@linux.com>
Link: https://patch.msgid.link/20260727160859.1917096-1-mbaragiola@linux.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 2c56ef658a upstream.
The WEP shared-key authentication handler uses the challenge-text
element's attacker-controlled length without checking it against the
fixed 128-byte chg_txt buffer.
In OnAuthClient() the length from rtw_get_ie() - up to 255 - is used
to perform memcpy() into the 128-byte pmlmeinfo->chg_txt, so a
malicious AP sending a malformed WLAN_EID_CHALLENGE element can
overflow/underfill chg_txt by up to 127 bytes. It is reachable over the
air, before association, during shared-key authentication. In the case
of an overflow, the driver can write out of bounds. In the case of an
underfill, the driver can echo stale buffer memory.
The challenge text is defined to be exactly 128 octets, which is
already provided as the WLAN_AUTH_CHALLENGE_LEN define; require the
element to be exactly that length before use.
Fixes: 554c0a3abf ("staging: Add rtl8723bs sdio wifi driver")
Cc: stable <stable@kernel.org>
Signed-off-by: Panagiotis Petrakopoulos <npetrakopoulos2003@gmail.com>
Link: https://patch.msgid.link/20260720082409.168379-1-npetrakopoulos2003@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit ae21407350 upstream.
WMM_param_handler() copies a fixed-size WMM parameter element out of a
received information element without checking that the element is long
enough, causing an out-of-bounds read for a short WMM IE.
The handler reads sizeof(struct WMM_para_element) (18) bytes at
pIE->data + 6, so it requires pIE->length to be at least 24
(WLAN_WMM_LEN), but it never validates the length. Two of its three
callers reach it after matching only the WMM OUI: OnAssocRsp() in
rtw_mlme_ext.c matches a 6-byte OUI, and join_cmd_hdl() matches a
4-byte OUI, before calling the handler. A vendor-specific IE carrying
the WMM OUI but a length between 6 and 23, placed in an association
response or in the IE blob handed to join_cmd_hdl(), passes the OUI
check and then makes the memcmp() and memcpy() at pIE->data + 6 read
past the end of the element. OnAssocRsp() parses a frame received from
the AP, so this is reachable from a remote peer.
The remaining caller in rtw_wlan_util.c already guards the handler with
"pIE->length == WLAN_WMM_LEN". Move the equivalent check into the
handler itself so every caller is covered; the sibling IE handlers in
the same parsing loop (HT_caps_handler(), HT_info_handler(),
ERP_IE_handler()) likewise bound their accesses by pIE->length.
Fixes: 554c0a3abf ("staging: Add rtl8723bs sdio wifi driver")
Cc: stable@vger.kernel.org
Signed-off-by: Muhammad Bilal <meatuni001@gmail.com>
Link: https://patch.msgid.link/20260719041509.97894-1-meatuni001@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 1c3e23e788 upstream.
rtw_get_wpa_ie() reads bytes at fixed offsets into a vendor-specific
information element without checking that the element is long enough,
causing an out-of-bounds read for a short trailing IE.
The function locates a vendor-specific IE (EID 221) with rtw_get_ie()
and then compares a 4-byte OUI+type at pbuf + 2 and reads a 2-byte
version word at pbuf + 6. Those accesses require the IE body to be at
least 6 bytes, but rtw_get_ie() only guarantees that the element fits
within the buffer; it does not enforce a minimum body length. A
vendor-specific IE whose length byte is 0 to 5, placed at the end of
the buffer, therefore makes these reads run past the end of the IE and
past the end of the buffer itself.
The buffer holds information elements taken from received management
frames and from the IE blob passed to rtw_cfg80211_set_wpa_ie(), which
is kmemdup'd to its exact length, so the read can run off the end of
the allocation.
The sibling helpers rtw_get_sec_ie(), rtw_get_wapi_ie() and
rtw_get_wps_ie() in this file already reject too-short vendor-specific
IEs before their OUI memcmp(); rtw_get_wpa_ie() was never brought in
line with them, and needs a minimum of 6 rather than 4 bytes because
of the version word. Add the missing length check.
Fixes: 554c0a3abf ("staging: Add rtl8723bs sdio wifi driver")
Cc: stable <stable@kernel.org>
Signed-off-by: Muhammad Bilal <meatuni001@gmail.com>
Link: https://patch.msgid.link/20260719030631.88254-1-meatuni001@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 36672c8d7d upstream.
The RS485 trigger hrtimers are embedded in the devm-managed port and can
fire after it is freed. The IRQ handler can arm a timer, so free the IRQ
first and then cancel both timers.
Complete the RS485 stop without arming a timer, and cancel the timers
in remove() for the suspend-then-unbind path, where shutdown is not
called.
This issue was found by an in-house static analysis tool.
Fixes: 2c1fd53af2 ("serial: amba-pl011: Fix RTS handling in RS485 mode")
Cc: stable <stable@kernel.org>
Assisted-by: Codex:gpt-5.6
Signed-off-by: Fan Wu <fanwu01@zju.edu.cn>
Link: https://patch.msgid.link/20260731085915.326775-3-fanwu01@zju.edu.cn
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit dcb2f7576c upstream.
The RS485 stop hrtimer is used both to drain the transmitter and to wait
out delay_rts_after_send. The callback cannot tell the two apart, so it
restarts the post-send delay on every expiry and the timer never stops.
Add a WAIT_AFTER_SEND_DELAY state so its expiry ends the stop sequence
instead of restarting the delay.
Fixes: 2c1fd53af2 ("serial: amba-pl011: Fix RTS handling in RS485 mode")
Cc: stable <stable@kernel.org>
Assisted-by: Codex:gpt-5.6
Signed-off-by: Fan Wu <fanwu01@zju.edu.cn>
Link: https://patch.msgid.link/20260731085915.326775-2-fanwu01@zju.edu.cn
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 1423415471 upstream.
The NXP LPC32xx UART (PORT_LPC3220) can latch an RX character-timeout
interrupt while the RX FIFO is empty: IIR reports UART_IIR_RX_TIMEOUT
(0x0c) but LSR.DR is clear. A character timeout is only cleared by
reading RHR, but serial8250_rx_chars() reads RHR only when LSR.DR is
set, so nothing ever clears the condition. The interrupt is
level-triggered and re-fires immediately, so on a single-core ARM926
the resulting interrupt storm livelocks the CPU.
It is reproducible when userspace repeatedly opens the front-panel port
(ttyS1): serial8250_do_set_termios() re-enables interrupts on unlock and
the handler then spins forever with iir=0xcc lsr=0x60 ier=0x05, tripping
the soft-lockup detector in serial8250_handle_irq_locked().
LPC32xx has no dedicated 8250 glue driver, it's driven by the generic
8250_of. Add a hardware specific handle_irq for PORT_LPC3220, wired up
in of_platform_serial_setup() the same way fsl8250_handle_irq is
installed. The handler follows dw8250_handle_irq(): on an RX timeout
with an empty FIFO (LSR.DR and LSR.BI clear) it does one throwaway RHR
read to clear the condition, then calls serial8250_handle_irq_locked().
No real received data is ever discarded, and it is a no-op on healthy
UARTs which never report a timeout with DR clear.
This is the same class of bug already worked around in other 8250 drivers;
see commit 424d79183a ("serial: 8250_dw: Avoid "too much work" from bogus rx timeout interrupt")
which reports the identical iir=0xcc/lsr=0x60. See also
UART_RX_TIMEOUT_QUIRK in 8250_omap, and the note in 8250_bcm7271.
Cc: stable <stable@kernel.org>
Assisted-by: Claude:Opus4.8
Signed-off-by: Ryan Wilbur <rwilbur633@gmail.com>
Link: https://patch.msgid.link/20260730193920.28954-1-rwilbur633@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit e2fe6a0efe upstream.
serial8250_release_dma() terminates RX DMA and releases the channel, but
leaves rx_running set. If the port is closed while an RX transfer is
active, the stale state remains while rxchan is NULL until the channel is
requested again on the next open.
The DesignWare BUSY workaround added by commit a7b9ce39fb
("serial: 8250_dw: Ensure BUSY is deasserted") calls
serial8250_rx_dma_flush() from the LCR write path during startup. This
happens before serial8250_request_dma() obtains a new RX channel. On
reopen, the stale rx_running state therefore makes the flush path pass a
NULL channel to dmaengine_pause(), causing a kernel Oops.
Clear rx_running after terminating RX DMA, matching the TX cleanup. Also
make the flush helper return if the DMA object or RX channel is not
available so startup and teardown paths cannot pass a NULL channel to the
DMAengine API.
Fixes: 0fcb7901f9 ("tty: serial: 8250_dma: keep own book keeping about RX transfers")
Cc: stable <stable@kernel.org>
Signed-off-by: Cunhao Lu <1579567540@qq.com>
Link: https://patch.msgid.link/tencent_9EE2945F4C933B4D810C73C2D7485E000F06@qq.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit e3c04834ae upstream.
When transmit flushing a qcom-geni UART during an ongoing TX DMA, the
UART gets stuck infinitely repeating corrupted TX DMA frames.
The DMA-mode uart_ops does not provide a flush_buffer callback, so an
in-flight transfer can complete after serial core has reset the transmit
kfifo, underflowing its length and resubmitting page-sized transfers
indefinitely. Add one that stops the transfer and clears tx_remaining
and tx_queued.
The stop path was also broken: it unmapped the buffer while the serial
engine could still read it, and never reset the TX DMA state machine.
Cancel the main sequencer command first, then reset the state machine
and wait for it before unmapping. Drop the early return so a pending
mapping is also cleaned up when the main command is inactive.
The bug can be triggered from userspace with a large write immediately
followed by TCOFLUSH. A following tcdrain will hang forever. The bug was
reproduced and this fix was validated on Arduino Uno Q (QRB2210)
using /dev/ttyHS1.
Assisted-by: Claude:claude-5-opus Codex:gpt-5
Signed-off-by: Jan Sebastian Götte <linux@jaseg.de>
Fixes: 2aaa43c707 ("tty: serial: qcom-geni-serial: add support for serial engine DMA")
Cc: stable <stable@kernel.org>
Reviewed-by: Praveen Talari <praveen.talari@oss.qualcomm.com>
Link: https://patch.msgid.link/20260729174105.21838-2-git@jaseg.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit dd7aea9ee2 upstream.
The get_current_thread() method is currently called for every ioctl to
ensure that a Thread struct exists for the thread calling into the
driver. However, not all ioctls require a Thread object, so this means
we are unnecessarily creating these objects in cases where we don't need
to. If said thread does not invoke BINDER_THREAD_EXIT on exit, Binder's
Thread struct stays around until the fd is closed. For long-lived
processes the Thread object is effectively leaked.
Furthermore, when the BINDER_GET_NODE_DEBUG_INFO ioctl is invoked by
libmemunreachable to ensure that objects reachable only through the
Binder driver are not considered leaked, this is done from a fork of the
process owning the fd, which means that it fails the group_leader check
inside get_current_thread(). This results in EINVAL errors for this
ioctl, causing libmemunreachable to report a false positive memory leak.
Thus, do not invoke get_current_thread() for ioctls that do not require
it.
Signed-off-by: Alice Ryhl <aliceryhl@google.com>
Cc: stable <stable@kernel.org>
Fixes: eafedbc7c0 ("rust_binder: add Rust Binder driver")
Acked-by: Carlos Llamas <cmllamas@google.com>
Link: https://patch.msgid.link/20260727-binder-cur-thread-v1-1-8edf2b64e235@google.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit ff10b6db0a upstream.
The Apple SPMI NVMEM driver previously cast regmap_bulk_read/write to
void * when assigning them to nvmem_config's reg_read/reg_write
function pointers.
This cast breaks the expected function signature of nvmem_reg_read_t
and nvmem_reg_write_t. With CFI enabled, indirect calls through
these pointers fail:
CFI failure at nvmem_reg_write+0x194/0x1e4 (target: regmap_bulk_write+0x0/0x2c8; expected type: 0x83a189c3)
...
Call trace:
nvmem_reg_write+0x194/0x1e4 (P)
__nvmem_cell_entry_write+0x298/0x2e8
nvmem_cell_write+0x24/0x34
macsmc_reboot_probe+0x1dc/0x454 [macsmc_reboot]
...
Introduce thin wrapper functions with the correct nvmem function
pointer types to satisfy the CFI checks.
Fixes: fe91c24a55 ("nvmem: Add apple-spmi-nvmem driver")
Signed-off-by: Aelin Reidel <aelin@mainlining.org>
Reported-by: Clayton Craft <craftyguy@postmarketos.org>
Tested-by: Clayton Craft <craftyguy@postmarketos.org>
Reviewed-by: Sven Peter <sven@kernel.org>
Cc: stable@vger.kernel.org
Signed-off-by: Srinivas Kandagatla <srini@kernel.org>
Link: https://patch.msgid.link/20260724223404.629248-2-srini@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit bc5bde9ce3 upstream.
fib_nhc_update_mtu() walks the nexthop exception table under RTNL, but
RTNL does not serialize this walk with PMTU exception updates. The walk
uses rcu_dereference_protected() with a constant true condition without
holding fnhe_lock.
The following interleaving can therefore occur:
CPU 0 CPU 1
fib_nhc_update_mtu() update_or_create_fnhe()
load fnhe spin_lock_bh(&fnhe_lock)
fnhe_remove_oldest()
unlink fnhe
kfree_rcu(fnhe, rcu)
<quiescent state>
access fnhe after grace period
KASAN reported:
BUG: KASAN: slab-use-after-free in fib_nhc_update_mtu+0x3df/0x410
Read of size 8 at addr ffff888107d49000 by task poc/90
Call Trace:
fib_nhc_update_mtu+0x3df/0x410
fib_sync_mtu+0x7a/0xd0
fib_netdev_event+0x229/0x3f0
netif_set_mtu_ext+0x33a/0x570
dev_set_mtu+0x88/0x120
The same walk updates fnhe_pmtu and fnhe_mtu_locked. These fields form a
pair and other writers serialize them with fnhe_lock. RCU alone prevents
reclamation, but would still allow concurrent writers to leave a mixed
pair.
Walk the table under RCU and acquire fnhe_lock only while updating each
exception. RCU keeps the current entry alive while the short critical
section serializes its paired PMTU fields. This avoids holding the global
lock while scanning all 2048 buckets for every nexthop.
Fixes: af7d6cce53 ("net: ipv4: update fnhe_pmtu when first hop's MTU changes")
Cc: stable@vger.kernel.org
Suggested-by: Ido Schimmel <idosch@nvidia.com>
Signed-off-by: Chengfeng Ye <nicoyip.dev@gmail.com>
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Link: https://patch.msgid.link/20260807181710.1178747-1-nicoyip.dev@gmail.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 4ff9548d84 upstream.
fib_nlmsg_size() still estimates nexthop space as if every gateway is
encoded as an IPv4 RTA_GATEWAY attribute. IPv4 routes can also carry an
IPv6 gateway, which fib_nexthop_info() dumps as RTA_VIA.
As a result, route notifications can allocate an skb that is too small.
fib_dump_info() then fails with -EMSGSIZE and rtmsg_fib() hits the
WARN_ON() that marks such failures as a fib_nlmsg_size() bug. With
panic_on_warn set, this becomes a kernel panic.
Mirror the actual nexthop dump layout in fib_nlmsg_size(): account for
IPv6 nexthop gateways dumped as RTA_VIA, for the no-header rtnexthop
layout used inside RTA_MULTIPATH, and for RTA_FLOW only when it is
actually present.
Fixes: d15662682d ("ipv4: Allow ipv6 gateway with ipv4 routes")
Cc: stable@vger.kernel.org
Reported-by: Vega <vega@nebusec.ai>
Signed-off-by: Zihan Xi <zihanx@nebusec.ai>
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Link: https://patch.msgid.link/6f53fa797fcaeb26966432ed7ae9bb87c4961f37.1785411220.git.zihanx@nebusec.ai
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 5ead206361 ]
RTL8761B and RTL8761BU devices report HCI version 5.1 but do not
support the LE Extended Scan commands. This causes repeated failures
with Opcode 0x2042 (LE Set Extended Scan Parameters) returning -EBUSY
when BlueZ attempts extended scanning while a connection is active.
Set HCI_QUIRK_BROKEN_EXT_SCAN for CHIP_ID_8761B to make BlueZ fall
back to legacy LE scan commands which the firmware supports correctly.
Tested with RTL8761BU (USB ID 0bda:a728) where the issue manifested
as continuous 'Opcode 0x2042 failed: -16' errors in dmesg whenever
a BLE connection was active.
Signed-off-by: Alexej Sidorenko <alexej@sidorenko.cz>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 7e7a817f2d ]
This reverts commit
314c828416 ("netfilter: nf_tables: can't schedule in nft_chain_validate"):
Since commit a60a5abe19 ("netfilter: nf_tables: allow iter callbacks to sleep")
the iterator callback is invoked without rcu read lock held, so this
cond_resched() is now valid.
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
commit 6d4514ca9c upstream.
A robust futex unlock stores 0 over the whole futex value - wiping
FUTEX_WAITERS - and wakes a single waiter. That wakeup is a one-shot
notification: the protocol relies on its recipient to either acquire the
futex (and eventually unlock while aware of the remaining contention) or
re-arm FUTEX_WAITERS before sleeping again. If the woken waiter is killed
before it can do either, the kernel must jump in and wake the next task
down the line.
This is a known complication of the futex protocol with a previous
partial fix in commit ca16d5bee5 ("futex: Prevent robust futex exit
race"). Unfortunately, that fix is insufficient.
If a third task re-acquired the futex through the uncontended fast
path in the meantime, the notification is lost: robust exit processing
sees that it is owned by another task and does nothing, while the new
owner sees no FUTEX_WAITERS when it unlocks and wakes nobody.
The remaining waiters sleep forever behind a free futex:
A owns the futex, B and C sleep in FUTEX_WAIT
uval == A | FUTEX_WAITERS
A robust unlock: store 0, FUTEX_WAKE(1) wakes B
uval == 0
D fast path acquire: cmpxchg(0 -> D)
uval == D, no FUTEX_WAITERS
B killed before acting on the wakeup
B exit walk, pending op: owner D != B -> no action
D unlock: no FUTEX_WAITERS -> no wake
C sleeps forever
This is clearly a shortcoming in the implementation, which fails to keep
the FUTEX_WAITERS bit consistent.
Work around this by augmenting the robust list exit processing to also
perform the extra wakeup if the futex word is owned by another thread but
FUTEX_WAITERS is not set.
This does not fix the problem of a non-contended take over/release and free
sequence, which has been discussed for years and has been addressed by
commit 3ca9595d9f ("futex: Add support for unlocking robust futexes") and
subsequent changes, but failed to take the problem described above into
account.
A more complete solution which is based on the in kernel unlock of
contended robust futexes has been discussed in the context of this change
and should show up in mainline sooner than later.
[ tglx: Amend change log slightly and fixup coding style ]
Fixes: ca16d5bee5 ("futex: Prevent robust futex exit race")
Signed-off-by: Keno Fischer <keno@juliahub.com>
Signed-off-by: Thomas Gleixner <tglx@kernel.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Thomas Gleixner <tglx@kernel.org>
Assisted-by: ClaudeCode:claude-fable-5 tla+
Cc: stable@vger.kernel.org
Link: https://patch.msgid.link/20260730194705.38981-1-keno@juliacomputing.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
In the 6.12 and 6.18 stable trees, when an unmapped range covers a
whole page table, intel_iommu_unmap() can free that table before the
range has been invalidated. The freed table goes on gather->freelist
before the range is added to the gather. If
iommu_iotlb_gather_add_page() syncs before adding it, that sync
flushes only the earlier ranges but frees the whole freelist, that
table included. The range itself is flushed later with an empty
freelist, which means the flush is sent with the invalidation hint set
and the IOMMU may keep its paging-structure cache entry for the freed
table. DMA to the next mapping at that IOVA is then translated through
whatever the freed page holds by then, which is usually a silent wrong
translation and sometimes a DMAR fault.
Under a userspace driver that maps and unmaps DMA buffers through VFIO
type1 continuously, this shows up as wrong data in device reads and
writes. An occasional DMAR fault on a mapped IOVA is the only thing in
the logs. With an Intel DSA engine assigned through vfio-pci, remapping
a 16 MiB buffer at a fixed IOVA and reading it through the device
returned data from the wrong pages in 280 of 400 iterations. With a
fresh IOVA per iteration it never did.
Add the range to the gather first and splice the freed tables into
gather->freelist afterwards, so that they are only freed by a sync that
also invalidates their range.
Mainline removed this code in v6.19 with commit d373449d8e
("iommu/vt-d: Use the generic iommu page table") and is not affected.
Fixes: 2a2b8eaa5b ("iommu: Handle freelists when using deferred flushing in iommu drivers")
Cc: stable@vger.kernel.org # 6.12.y, 6.18.y
Reported-by: Mohammed Almaroof <moh@anthropic.com>
Reviewed-by: Ben Cressey <ben@cressey.dev>
Assisted-by: Claude:unspecified
Signed-off-by: Jose Fernandez (Anthropic) <jose.fernandez@linux.dev>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit e27264daac ]
The DT bindings for inline-crypto engine do not specify the UFS_PHY_GDSC
power-domain and iface clock. Without enabling the iface clock and the
associated power-domain the ICE hardware cannot function correctly and
leads to unclocked hardware accesses being observed during probe.
Extend and fix the DT bindings for inline-crypto engine by allowing
description of the iface clock and UFS_PHY_GDSC power-domain.
This patch has been adapted from the mentioned upstream commit to drop
references to Eliza and Milos Qualcomm platforms which do not exist
on the stable tree. Thus, patch now fixes the original commit which
introduced the DT binding for Qualcomm inline-crypto engine.
Fixes: f6ff91a47a ("dt-bindings: crypto: Add Qualcomm Inline Crypto Engine")
Reviewed-by: Kuldeep Singh <kuldeep.singh@oss.qualcomm.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>
Signed-off-by: Harshal Dev <harshal.dev@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20260416-qcom_ice_power_and_clk_vote-v5-1-5ccf5d7e2846@oss.qualcomm.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 0cfe660559 ]
The current implementation of aisb calculation will erroneously index
via an unsigned long * as well as multiply by 8B for every 64-bits in
the offset; only one or the other is required. This throws off aisb
calculations once the number of devices exceeds 64, and can result
in out-of-bounds access as well as failure to indicate summary bits
associated with those devices in guests.
Fix this by converting to a physical address before applying the
offset, as is already done in arch/s390/pci/pci_irq.c.
Fixes: 3c5a1b6f0a ("KVM: s390: pci: provide routines for enabling/disabling interrupt forwarding")
Signed-off-by: Matthew Rosato <mjrosato@linux.ibm.com>
Reviewed-by: Niklas Schnelle <schnelle@linux.ibm.com>
Signed-off-by: Christian Borntraeger <borntraeger@linux.ibm.com>
[alifm@linux.ibm.com: Resolved merge conflict]
Signed-off-by: Farhan Ali <alifm@linux.ibm.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit b051bb6bf0 ]
A previous commit removed an optimization out of caution for a scenario
that turns out not to be real: all the "queue_exit" goto's are safe to
reinsert the request into the cached_rq's plug list as they are either
from a non-blocking path, or a successful merge that already holds the
queue reference. This optimization is most needed for small sequential
workloads that successfully merge into larger requests.
Fixes: dc278e9bf2 ("blk-mq: pop cached request if it is usable")
Suggested-by: Ming Lei <tom.leiming@gmail.com>
Suggested-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Keith Busch <kbusch@kernel.org>
Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com>
Link: https://patch.msgid.link/20260526153531.2365935-1-kbusch@meta.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Simon Liebold <simonlie@amazon.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit dc278e9bf2 ]
When submitting a bio to blk-mq, if the task should sleep after peeking
a cached request, but before it pops it, the plug flushes and calls
blk_mq_free_plug_rqs, freeing the cached_rqs. This creates a
use-after-free bug. Fix this by popping the cached request before any
possible blocking calls if it is suitable for use.
Popping this request first holds a queue reference, so avoid any
serialization races with queue freezes and can safely proceed with
dispatching that request to the driver. This potentially increases a
timing window from when a driver wants to freeze its queue to when
requests stop being dispatched. That scenario is off the fast path
though, and drivers need to appropriately handle requests during a
freeze request anyway.
The downside is the popped element needs to be individually freed when
we performed a bio plug merge. The cached request would have had to be
freed later anyway, but this patch does it inline with building the plug
list instead of after flushing it.
Fixes: b0077e269f ("blk-mq: make sure active queue usage is held for bio_integrity_prep()")
Fixes: 7b4f36cd22 ("block: ensure we hold a queue reference when using queue limits")
Signed-off-by: Keith Busch <kbusch@kernel.org>
Link: https://patch.msgid.link/20260521190253.242065-1-kbusch@meta.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Simon Liebold <simonlie@amazon.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
commit 63488dba65 upstream.
br_mrp_alloc_test_skb() builds MRP test frames on an skb from
dev_alloc_skb(), which does not clear the linear data area. On the MRA
ring-role branch the sub-option TLV header is appended with
sub_tlv = skb_put(skb, sizeof(*sub_tlv));
sub_tlv->type = BR_MRP_SUB_TLV_HEADER_TEST_AUTO_MGR;
so sub_tlv->length is never written, and the two trailing alignment bytes
are appended with a bare skb_put() that does not clear them either. The
neighbouring oui and sub_opt regions are explicitly zeroed, so three
uninitialised bytes are left in every MRA MRP_Test frame that goes out.
Put the sub-option TLV header and the alignment padding in a single
skb_put_zero(), which clears both. The AUTO_MGR sub-TLV carries no
payload, so the zeroed length field is already the value it should have.
Fixes: f7458934b0 ("net: bridge: mrp: Update the Test frames for MRA")
Suggested-by: Nikolay Aleksandrov <razor@blackwall.org>
Cc: stable@vger.kernel.org
Signed-off-by: Baul Lee <baul.lee@xbow.com>
Acked-by: Nikolay Aleksandrov <razor@blackwall.org>
Link: https://patch.msgid.link/20260729131941.10254-1-baul.lee@xbow.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 3082597033 upstream.
nf_log_unregister() runs after the per-net teardown so its final RCU
grace period also drains readers that obtained the logger from a per-net
binding. However, ebt_nflog passes an explicit ULOG log type to
nf_log_packet() without holding a reference on the selected logger module,
unlike the xt_NFLOG and nft_log frontends.
An ebtables nflog rule can therefore remain callable while nfnetlink_log
is unloaded. The resulting interleaving is:
CPU 0 CPU 1
nfnetlink_log_fini()
unregister_pernet_subsys()
kfree(nfnl_log_pernet(net))
ebt_nflog_tg()
nf_log_packet()
nfulnl_log_packet()
instance_lookup_get_rcu()
The global ULOG logger is still registered at this point, so CPU 1
dereferences the per-net state after CPU 0 has freed it. KASAN reported:
BUG: KASAN: slab-use-after-free in instance_lookup_get_rcu
Read of size 8 at addr ff110001052e6210 by task poc/92
Call Trace:
instance_lookup_get_rcu+0x1ce/0x1f0 [nfnetlink_log]
nfulnl_log_packet+0x248/0x2fb0 [nfnetlink_log]
nf_log_packet+0x204/0x300
ebt_nflog_tg+0x351/0x550
ebt_do_table+0xedf/0x22b0
Allocated by task 90:
__kmalloc_noprof+0x186/0x470
ops_init+0x6d/0x420
register_pernet_operations+0x2f6/0x670
register_pernet_subsys+0x23/0x40
Freed by task 93:
kfree+0x131/0x3c0
ops_undo_list+0x3e3/0x700
unregister_pernet_operations+0x232/0x490
unregister_pernet_subsys+0x1c/0x30
nfnetlink_log_fini+0x34/0x450 [nfnetlink_log]
Acquire the ULOG logger module reference when an ebt_nflog rule is
validated and release it when the rule is destroyed. Request the NFLOG
backend for legacy callers when needed, matching xt_NFLOG. This prevents
module teardown until all ebt_nflog rules have stopped using the logger.
Fixes: c83fa19603 ("netfilter: nf_log: don't call synchronize_rcu in nf_log_unset")
Cc: stable@vger.kernel.org
Signed-off-by: Chengfeng Ye <nicoyip.dev@gmail.com>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit b0ce5fd9fa upstream.
__igc_resume() calls netif_device_attach() only inside the
netif_running() branch, so an interface that was down during suspend
is never re-attached on resume. It then stays in the not-present state
that __igc_shutdown() set via netif_device_detach(): ethtool reports
ENODEV and every attempt to bring the interface up fails the
netif_device_present() check in __dev_open() with -ENODEV, silently,
since __igc_resume() returns 0. Only reloading the driver recovers the
device.
This is easy to hit in practice because NetworkManager brings managed
interfaces down before sleep unless Wake-on-LAN is configured, making
the adapter unusable after every suspend/resume cycle with WoL
disabled.
Re-attach the netdev on every successful resume, as igb and e1000e do.
Fixes: 6f31d6b643 ("igc: Refactor runtime power management flow")
Cc: stable@vger.kernel.org
Signed-off-by: Philipp David <pd-lkml@3b.pm>
Reviewed-by: Aleksandr Loktionov <aleksandr.loktionov@intel.com>
Reviewed-by: Dima Ruinskiy <dima.ruinskiy@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Link: https://patch.msgid.link/20260804222205.1580328-11-anthony.l.nguyen@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 5f26a690e8 upstream.
mac802154_beacon_worker() reads local->beacon_req under RCU and derives
the sub-interface from the request, but then drops the RCU read lock and
continues to use both sdata and the embedded wpan_dev.
mac802154_stop_beacons_locked() cancels only pending beacon work, clears
local->beacon_req and frees the request. A beacon worker that is already
running can therefore continue after interface teardown and dereference
the freed netdev private area.
The scan worker already pins the netdev before leaving RCU. Apply the
same lifetime rule to the beacon worker: take a netdev reference while
the request is still protected by RCU, and release it on all paths that
continue after the reference is acquired.
Fixes: 3accf47627 ("mac802154: Handle basic beaconing")
Cc: stable@vger.kernel.org
Reported-by: Vega <vega@nebusec.ai>
Signed-off-by: Zihan Xi <zihanx@nebusec.ai>
Reviewed-by: Miquel Raynal <miquel.raynal@bootlin.com>
Link: https://patch.msgid.link/e9a3909c7a6281967961773ca841e860b8ecf40e.1785596603.git.zihanx@nebusec.ai
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 653d7ddf6c upstream.
inet_frag_create() arms the fragment queue timer before inserting the
queue into the fqdir rhashtable. If the namespace fragment timeout is
zero or negative, the timer can run before the queue is published.
The timer callback then marks the queue complete, tries to remove a node
that is not in the hash table yet, and drops the anticipated hash
reference. Creation can subsequently publish the completed queue without
restoring that reference, leaving a stale hash node after the caller drops
the remaining reference.
Publish the queue first and arm the timer while holding the queue lock.
This makes timer expiry wait until the queue is visible in the hash table,
so inet_frag_kill() can remove the node and balance the hash reference.
Fixes: 648700f76b ("inet: frags: use rhashtables for reassembly units")
Cc: stable@vger.kernel.org
Reported-by: Vega <vega@nebusec.ai>
Signed-off-by: Zhiling Zou <zhilinz@nebusec.ai>
Signed-off-by: Ren Wei <enjou1224z@gmail.com>
Link: https://patch.msgid.link/bf66785e7c0c139d7a1900e2f01faeeab344b960.1784948849.git.zhilinz@nebusec.ai
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 3b9a324e64 upstream.
dev_validate_header() reads dev->hard_header_len directly when
zero-padding short link layer headers for CAP_SYS_RAWIO holders:
if (capable(CAP_SYS_RAWIO)) {
memset(ll_header + len, 0, dev->hard_header_len - len);
return true;
}
Packet send paths call dev_validate_header() on skbs whose headroom was
allocated from an earlier hard_header_len read. If the device is
reconfigured so that dev->hard_header_len increases before validation,
the memset writes past the reserved buffer, an out-of-bounds write.
This out-of-bounds write is masked in some SOCK_RAW paths today because
the same concurrent increase can first make skb_push() exceed the
reserved headroom and trigger skb_under_panic(). Remove the zero-padding
branch before making those hard_header_len reads consistent, so the
snapshot fixes do not turn a loud panic into a silent overwrite.
This path is only reached for variable length L2 protocols, where
len < hard_header_len but len >= min_header_len. No remaining in-tree
variable length L2 protocol implements header_ops->validate, and the
CAP_SYS_RAWIO bypass that zero-pads and accepts short headers has no
real value beyond allowing testing of intentionally malformed input.
Drop the CAP_SYS_RAWIO branch. The remaining reads of
dev->hard_header_len in dev_validate_header() are comparisons only and
have no memory safety impact.
Suggested-by: Willem de Bruijn <willemb@google.com>
Fixes: 2793a23aac ("net: validate variable length ll headers")
Cc: stable@vger.kernel.org
Signed-off-by: Qihang Tang <q.h.hack.winter@gmail.com>
Reviewed-by: Willem de Bruijn <willemb@google.com>
Link: https://patch.msgid.link/20260805125729.19220-2-q.h.hack.winter@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 7e2d693af0 upstream.
In function otx2_get_egress_burst_cfg, when the parameter `burst` is
255 and the max mantissa is 255 (0xFFULL), `burst_exp` is set to
`ilog2(255) - 1`, which equals 6.
This results in an unsigned wrap-around when calculating
`(1ULL << (*burst_exp - 7))`, since `*burst_exp - 7` becomes -1,
which makes the shift operand 0xFFFFFFFF. This value is greater than
the width of the left operand.
According to standard 6.5.7 p.3:
"The type of the result is that of the promoted left operand.
If the value of the right operand is negative or is greater than
or equal to the width of the promoted left operand, the behavior
is undefined."
Fix the off-by-one boundary condition.
Add a WARN_ON(*burst_exp < 7) before the else branch as an
explicit safeguard. This ensures that if max_mantissa ever changes
in a way that reintroduces this condition, it will be immediately
caught at runtime rather than silently triggering UB.
Found by Linux Verification Center (linuxtesting.org) with SVACE.
Fixes: e638a83f16 ("octeontx2-pf: TC_MATCHALL egress ratelimiting offload")
Signed-off-by: Sergey V. Frolov <Sergey.V.Frolov@kaspersky.com>
Cc: stable@vger.kernel.org
Reviewed-by: Ratheesh Kannoth <rkannoth@marvell.com>
Reviewed-by: Sunil Goutham <sgoutham@marvell.com>
Link: https://patch.msgid.link/20260804120446.1955448-1-Sergey.V.Frolov@kaspersky.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 5d1c224dd9 upstream.
ovs_flow_cmd_new() preallocates the optional reply skb before it takes
ovs_mutex and before it knows which existing flow will be updated.
That is normally fine because the skb is sized from the request flow
identifier. That identifier also becomes the inserted flow's identifier.
For updates, however, a request with a UFID may miss the UFID lookup and
then fall back to the flow key lookup. That lookup can legitimately find
an existing key-identified flow. UFIDs are optional and the flow key is
the primary identifier.
For echoed replies, ovs_flow_cmd_fill_info() writes the matched flow's
identifier, not the request identifier used for the preallocation. A short
request UFID can therefore leave too little room for the key identifier.
The fill can then fail with -EMSGSIZE and hit the BUG_ON(error < 0) in the
update path.
Once the update target has been resolved, reallocate the reply skb if the
matched flow needs a larger reply than the request identifier allowed. Do
this before replacing the actions so the request can still fail cleanly if
the rare extra allocation fails.
Fixes: 74ed7ab926 ("openvswitch: Add support for unique flow IDs.")
Cc: stable@vger.kernel.org
Reported-by: Vega <vega@nebusec.ai>
Signed-off-by: Zhiling Zou <zhilinz@nebusec.ai>
Reviewed-by: Ilya Maximets <i.maximets@ovn.org>
Link: https://patch.msgid.link/f7bbd3c30ce81a39156e226b3872d73abed21d2f.1785644623.git.zhilinz@nebusec.ai
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 33f2b2eb33 upstream.
Generic XDP exposes non-linear skb fragments through an xdp_buff. If an
XDP program adjusts the fragment area, bpf_prog_run_generic_xdp() copies
xdp_frags_size back to skb->data_len but leaves skb->len containing the
old fragment contribution.
After a fragment shrink, this makes skb_headlen() larger than the actual
linear area. In the reproduced UDP receive path, __skb_datagram_iter()
copied 1024 bytes past the actual linear tail to userspace, starting at
struct skb_shared_info. The copied bytes included the affected skb's
nr_frags, xdp_frags_size and a kernel pointer from
skb_shinfo(skb)->frags[0]. Real packet data was displaced by the same
amount and truncated at the end.
Subtract the old data_len before replacing it and add the new data_len
afterwards, keeping skb->len and skb->data_len synchronized.
A 60000-byte UDP datagram on a veth pair with MTU 64000 was shortened by
1024 bytes from its fragment area. Before the fix, all 10 runs produced
corrupted payloads. After the fix, all 10 runs matched the expected
payload exactly.
Fixes: e6d5dbdd20 ("xdp: add multi-buff support for xdp running in generic mode")
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/bpf/al9T9Eto%2FhRIzP5W@boxer/
Reviewed-by: Mohsin Bashir <hmohsin@meta.com>
Acked-by: Lorenzo Bianconi <lorenzo@kernel.org>
Signed-off-by: Sun Jian <sun.jian.kdev@gmail.com>
Link: https://patch.msgid.link/20260804054040.613675-2-sun.jian.kdev@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 1a35da325c upstream.
packet_set_ring() updates the RX ring state under sk_receive_queue.lock,
but used to publish the tpacket receive mode through po->prot_hook.func
after releasing that lock. packet_poll() and packet_recvmsg() can then
run the pressure clearing path after the ring has been cleared while
still seeing tpacket_rcv, causing __packet_rcv_has_room() to dereference
stale or NULL ring storage.
Move the existing receive hook assignment into the same
sk_receive_queue.lock section as the ring state update. Keep the
assignment otherwise unchanged, including on TX ring reconfiguration, to
avoid adding behavior changes that are not required for the fix.
Serialize packet_recvmsg() pressure clearing with the same queue lock
only after PACKET_SOCK_PRESSURE has been observed. If the flag is clear
and the socket has moved away from tpacket_rcv, packet_set_ring() has
already detached the socket and waited for synchronize_net(), so no new
packet input can set the flag again.
packet_poll() already holds sk_receive_queue.lock, so it uses the new
unlocked helper directly.
Fixes: 2ccdbaa6d5 ("packet: rollover lock contention avoidance")
Cc: stable@vger.kernel.org
Reported-by: Vega <vega@nebusec.ai>
Assisted-by: Codex:gpt-5.4
Signed-off-by: Zihan Xi <zihanx@nebusec.ai>
Link: https://patch.msgid.link/f90b5688311fa278d1361ea8c6be0bf25967d591.1785247446.git.zihanx@nebusec.ai
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit c2707480cf upstream.
packet_parse_headers() resets the MAC header only for a SOCK_RAW frame
whose socket did not bind a protocol. A protocol-bound SOCK_RAW socket,
any SOCK_DGRAM frame, and the legacy SOCK_PACKET path therefore leave
skb->mac_header unset here.
For frames sent via __dev_queue_xmit() this is harmless: it resets the
MAC header unconditionally. But the packet-socket PACKET_QDISC_BYPASS
path uses dev_direct_xmit(), which does not, so the frame reaches
ndo_start_xmit() with the MAC header unset. A driver that reads
eth_hdr(skb) on transmit then dereferences skb->head + (u16)~0, an
out-of-bounds access ~64 KiB past the head -- the same class fixed for
one consumer in commit f5089008f9 ("macsec: do not read an unset MAC
header in macsec_encrypt()").
packet_parse_headers() runs only on the transmit path, where skb->data
points at the start of the L2 header for every packet-socket type
regardless of its length: SOCK_RAW and SOCK_PACKET carry a user-supplied
header and SOCK_DGRAM has one built by dev_hard_header(). Reset the MAC
header unconditionally, mirroring __dev_queue_xmit(), so the frame is
anchored on the bypass path too.
Found by 0sec (https://0sec.ai) using automated source analysis;
verified against source and matched to the macsec KASAN report in
f5089008f9. Compile-tested.
Fixes: 75c65772c3 ("net/packet: Ask driver for protocol if not provided by user")
Cc: stable@vger.kernel.org
Signed-off-by: Doruk Tan Ozturk <doruk@0sec.ai>
Reviewed-by: Willem de Bruijn <willemb@google.com>
Link: https://patch.msgid.link/20260724144015.63219-1-doruk@0sec.ai
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 21b5953e74 upstream.
tpacket_snd() reads dev->hard_header_len independently for skb
allocation and header construction in tpacket_fill_skb(). Concurrent
netdevice reconfiguration can therefore make the reserved headroom
smaller than the amount later pushed, or make copylen - hard_header_len
negative.
Snapshot hard_header_len once before processing ring frames and use it
for the frame limit, headroom allocation, copy length, and skb
construction. Pass the snapshot to tpacket_fill_skb().
The separate SOCK_DGRAM consistency problem between hard_header_len and
header_ops->create is not addressed here.
Fixes: 69e3c75f4d ("net: TX_RING and packet mmap")
Cc: stable@vger.kernel.org
Signed-off-by: Qihang Tang <q.h.hack.winter@gmail.com>
Reviewed-by: Willem de Bruijn <willemb@google.com>
Link: https://patch.msgid.link/20260805125729.19220-4-q.h.hack.winter@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
SJ Park
liyouhong
Hui Su
Eddie Lin
Junrui Luo
Ekansh Gupta
Anandu Krishnan E
Mariano Baragiola
Panagiotis Petrakopoulos
Muhammad Bilal
Fan Wu
Ryan Wilbur
Cunhao Lu
Jan Sebastian Götte
Alice Ryhl
Mathieu Dubois-Briand
Aelin Reidel
Alexander Usyskin
Chengfeng Ye
Zihan Xi
Michal Luczaj
Nils Helmig
Alexej Sidorenko
Florian Westphal
Keno Fischer
Jose Fernandez (Anthropic)
Harshal Dev
Matthew Rosato
Keith Busch
Alex Deucher
Baul Lee
Philipp David
Zhiling Zou
Qihang Tang
Sergey V. Frolov
Zijie Huang
Sun Jian
Doruk Tan Ozturk