[ Upstream commit aab1f809d7 ]
For some unknown reason the regular expression for checkstack only matches
three digit numbers starting with the number "3", or any higher
number. Which means that it skips any stack sizes smaller than 304
bytes. This makes the checkstack script a bit less useful than it could be.
Change the script to match any number. To be filtered out stack sizes
can be configured with the min_stack variable, which omits any stack
frame sizes smaller than 100 bytes by default.
Tested-by: Alexander Gordeev <agordeev@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Alexander Gordeev <agordeev@linux.ibm.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 9ffccb691a ]
Honor MagicBook 13 2023 has a touchpad which do not switch to the multitouch
mode until the input mode feature is written by the host. The touchpad do
report the input mode at touchpad(3), while itself working under mouse mode. As
a workaround, it is possible to call MT_QUIRE_FORCE_GET_FEATURE to force set
feature in mt_set_input_mode for such device.
The touchpad reports as BLTP7853, which cannot retrive any useful manufacture
information on the internel by this string at present. As the serial number of
the laptop is GLO-G52, while DMI info reports the laptop serial number as
GLO-GXXX, this workaround should applied to all models which has the GLO-GXXX.
Signed-off-by: Aoba K <nexp_0x17@outlook.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 546edbd26c ]
Some devices managed by this driver automatically set brightness to 0
before entering a suspended state and reset it back to a default
brightness level after the resume:
this has the effect of having the kernel report wrong brightness
status after a sleep, and on some devices (like the Asus RC71L) that
brightness is the intensity of LEDs directly facing the user.
Fix the above issue by setting back brightness to the level it had
before entering a sleep state.
Signed-off-by: Denis Benato <benato.denis96@gmail.com>
Signed-off-by: Luke D. Jones <luke@ljones.dev>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 98c598afc2 ]
If a socket is processing ioctl 'NBD_SET_SOCK', config->socks might be
krealloc in nbd_add_socket(), and a garbage request is received now, a UAF
may occurs.
T1
nbd_ioctl
__nbd_ioctl
nbd_add_socket
blk_mq_freeze_queue
T2
recv_work
nbd_read_reply
sock_xmit
krealloc config->socks
def config->socks
Pass nbd_sock to nbd_read_reply(). And introduce a new function
sock_xmit_recv(), which differs from sock_xmit only in the way it get
socket.
==================================================================
BUG: KASAN: use-after-free in sock_xmit+0x525/0x550
Read of size 8 at addr ffff8880188ec428 by task kworker/u12:1/18779
Workqueue: knbd4-recv recv_work
Call Trace:
__dump_stack
dump_stack+0xbe/0xfd
print_address_description.constprop.0+0x19/0x170
__kasan_report.cold+0x6c/0x84
kasan_report+0x3a/0x50
sock_xmit+0x525/0x550
nbd_read_reply+0xfe/0x2c0
recv_work+0x1c2/0x750
process_one_work+0x6b6/0xf10
worker_thread+0xdd/0xd80
kthread+0x30a/0x410
ret_from_fork+0x22/0x30
Allocated by task 18784:
kasan_save_stack+0x1b/0x40
kasan_set_track
set_alloc_info
__kasan_kmalloc
__kasan_kmalloc.constprop.0+0xf0/0x130
slab_post_alloc_hook
slab_alloc_node
slab_alloc
__kmalloc_track_caller+0x157/0x550
__do_krealloc
krealloc+0x37/0xb0
nbd_add_socket
+0x2d3/0x880
__nbd_ioctl
nbd_ioctl+0x584/0x8e0
__blkdev_driver_ioctl
blkdev_ioctl+0x2a0/0x6e0
block_ioctl+0xee/0x130
vfs_ioctl
__do_sys_ioctl
__se_sys_ioctl+0x138/0x190
do_syscall_64+0x33/0x40
entry_SYSCALL_64_after_hwframe+0x61/0xc6
Freed by task 18784:
kasan_save_stack+0x1b/0x40
kasan_set_track+0x1c/0x30
kasan_set_free_info+0x20/0x40
__kasan_slab_free.part.0+0x13f/0x1b0
slab_free_hook
slab_free_freelist_hook
slab_free
kfree+0xcb/0x6c0
krealloc+0x56/0xb0
nbd_add_socket+0x2d3/0x880
__nbd_ioctl
nbd_ioctl+0x584/0x8e0
__blkdev_driver_ioctl
blkdev_ioctl+0x2a0/0x6e0
block_ioctl+0xee/0x130
vfs_ioctl
__do_sys_ioctl
__se_sys_ioctl+0x138/0x190
do_syscall_64+0x33/0x40
entry_SYSCALL_64_after_hwframe+0x61/0xc6
Signed-off-by: Li Nan <linan122@huawei.com>
Reviewed-by: Yu Kuai <yukuai3@huawei.com>
Reviewed-by: Ming Lei <ming.lei@redhat.com>
Link: https://lore.kernel.org/r/20230911023308.3467802-1-linan666@huaweicloud.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit c55092187d ]
These devices disconnect if suspended without remote wakeup. They can operate
with the standard driver.
Signed-off-by: Oliver Neukum <oneukum@suse.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit a5e913c25b ]
The Glorious Model I mouse has a buggy HID report descriptor for its
keyboard endpoint (used for programmable buttons). For report ID 2, there
is a mismatch between Logical Minimum and Usage Minimum in the array that
reports keycodes.
The offending portion of the descriptor: (from hid-decode)
0x95, 0x05, // Report Count (5) 30
0x75, 0x08, // Report Size (8) 32
0x15, 0x00, // Logical Minimum (0) 34
0x25, 0x65, // Logical Maximum (101) 36
0x05, 0x07, // Usage Page (Keyboard) 38
0x19, 0x01, // Usage Minimum (1) 40
0x29, 0x65, // Usage Maximum (101) 42
0x81, 0x00, // Input (Data,Arr,Abs) 44
This bug shifts all programmed keycodes up by 1. Importantly, this causes
"empty" array indexes of 0x00 to be interpreted as 0x01, ErrorRollOver.
The presence of ErrorRollOver causes the system to ignore all keypresses
from the endpoint and breaks the ability to use the programmable buttons.
Setting byte 41 to 0x00 fixes this, and causes keycodes to be interpreted
correctly.
Also, USB_VENDOR_ID_GLORIOUS is changed to USB_VENDOR_ID_SINOWEALTH,
and a new ID for Laview Technology is added. Glorious seems to be
white-labeling controller boards or mice from these vendors. There isn't a
single canonical vendor ID for Glorious products.
Signed-off-by: Brett Raye <braye@fastmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 113f736655 ]
Jamesdonkey A3R keyboard is identified as "Jamesdonkey A3R" in wired
mode, "A3R-U" in wireless mode and "A3R" in bluetooth mode. Adding them
to non-apple keyboards fixes function key.
Signed-off-by: Yihong Cao <caoyihong4@outlook.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 73ce9f1f27 ]
During the probe we add an I2C adapter and as soon as we add that adapter
it may be used for a transfer (e.g via the code in i2cdetect()).
Those transfers are not able to complete and time out. This is because the
HID raw_event callback (mcp2221_raw_event) will not be invoked until the
HID device's 'driver_input_lock' is marked up at the completion of the
probe in hid_device_probe(). This starves the driver of the responses it
is waiting for.
In order to allow the I2C transfers to complete while we are still in the
probe, start the IO once we have completed init of the HID device.
This issue seems to have been seen before and a patch was submitted but
it seems it was never accepted. See:
https://lore.kernel.org/all/20221103222714.21566-3-Enrik.Berkhan@inka.de/
Signed-off-by: Hamish Martin <hamish.martin@alliedtelesis.co.nz>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit d43f37b734 ]
When a cpu is hot-unplugged, it is put in idle state and the function
arch_cpu_idle_dead() is called. The timer interrupt for this processor
should be disabled, otherwise there will be pending timer interrupt for
the unplugged cpu, so that vcpu is prevented from giving up scheduling
when system is running in vm mode.
This patch implements the timer shutdown interface so that the constant
timer will be properly disabled when a CPU is hot-unplugged.
Reviewed-by: WANG Xuerui <git@xen0n.name>
Signed-off-by: Bibo Mao <maobibo@loongson.cn>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 19d86a4962 ]
Mark {dmw,tlb}_virt_to_page() exports as non-GPL, in order to let
out-of-tree modules (e.g. OpenZFS) be built without errors. Otherwise
we get:
ERROR: modpost: GPL-incompatible module zfs.ko uses GPL-only symbol 'dmw_virt_to_page'
ERROR: modpost: GPL-incompatible module zfs.ko uses GPL-only symbol 'tlb_virt_to_page'
Reported-by: Haowu Ge <gehaowu@bitmoe.com>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 902d75cdf0 ]
The kernel parameter 'nokaslr' is handled before start_kernel(), so we
don't need early_param() to mark it technically. But it can cause a boot
warning as follows:
Unknown kernel command line parameters "nokaslr", will be passed to user space.
When we use 'init=/bin/bash', 'nokaslr' which passed to user space will
even cause a kernel panic. So we use early_param() to mark 'nokaslr',
simply print a notice and silence the boot warning (also fix a potential
panic). This logic is similar to RISC-V.
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit aa0cbc1b50 ]
To clarify, the previous version functioned flawlessly. However, it's
worth noting that the LLVM's LoongArch backend currently lacks support
for cross-section label calculations. With this patch, we enable the use
of clang to compile relocatable kernels.
Tested-by: Nathan Chancellor <nathan@kernel.org>
Signed-off-by: WANG Rui <wangrui@loongson.cn>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit d3ec75bc63 ]
A common issue in Makefile is a race in parallel building.
You need to be careful to prevent multiple threads from writing to the
same file simultaneously.
Commit 3939f33450 ("ARM: 8418/1: add boot image dependencies to not
generate invalid images") addressed such a bad scenario.
A similar symptom occurs with the following command:
$ make -j$(nproc) ARCH=loongarch vmlinux.efi vmlinuz.efi
[ snip ]
SORTTAB vmlinux
OBJCOPY arch/loongarch/boot/vmlinux.efi
OBJCOPY arch/loongarch/boot/vmlinux.efi
PAD arch/loongarch/boot/vmlinux.bin
GZIP arch/loongarch/boot/vmlinuz
OBJCOPY arch/loongarch/boot/vmlinuz.o
LD arch/loongarch/boot/vmlinuz.efi.elf
OBJCOPY arch/loongarch/boot/vmlinuz.efi
The log "OBJCOPY arch/loongarch/boot/vmlinux.efi" is displayed twice.
It indicates that two threads simultaneously enter arch/loongarch/boot/
and write to arch/loongarch/boot/vmlinux.efi.
It occasionally leads to a build failure:
$ make -j$(nproc) ARCH=loongarch vmlinux.efi vmlinuz.efi
[ snip ]
SORTTAB vmlinux
OBJCOPY arch/loongarch/boot/vmlinux.efi
PAD arch/loongarch/boot/vmlinux.bin
truncate: Invalid number: ‘arch/loongarch/boot/vmlinux.bin’
make[2]: *** [drivers/firmware/efi/libstub/Makefile.zboot:13:
arch/loongarch/boot/vmlinux.bin] Error 1
make[2]: *** Deleting file 'arch/loongarch/boot/vmlinux.bin'
make[1]: *** [arch/loongarch/Makefile:146: vmlinuz.efi] Error 2
make[1]: *** Waiting for unfinished jobs....
make: *** [Makefile:234: __sub-make] Error 2
vmlinuz.efi depends on vmlinux.efi, but such a dependency is not
specified in arch/loongarch/Makefile.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit f40bfd1679 ]
This is a preparatory change. A follow-up patch "bpf: verify callbacks
as if they are called unknown number of times" changes logic for
callbacks handling. While previously callbacks were verified as a
single function call, new scheme takes into account that callbacks
could be executed unknown number of times.
This has dire implications for bpf_loop_bench:
SEC("fentry/" SYS_PREFIX "sys_getpgid")
int benchmark(void *ctx)
{
for (int i = 0; i < 1000; i++) {
bpf_loop(nr_loops, empty_callback, NULL, 0);
__sync_add_and_fetch(&hits, nr_loops);
}
return 0;
}
W/o callbacks change verifier sees it as a 1000 calls to
empty_callback(). However, with callbacks change things become
exponential:
- i=0: state exploring empty_callback is scheduled with i=0 (a);
- i=1: state exploring empty_callback is scheduled with i=1;
...
- i=999: state exploring empty_callback is scheduled with i=999;
- state (a) is popped from stack;
- i=1: state exploring empty_callback is scheduled with i=1;
...
Avoid this issue by rewriting outer loop as bpf_loop().
Unfortunately, this adds a function call to a loop at runtime, which
negatively affects performance:
throughput latency
before: 149.919 ± 0.168 M ops/s, 6.670 ns/op
after : 137.040 ± 0.187 M ops/s, 7.297 ns/op
Acked-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Eduard Zingerman <eddyz87@gmail.com>
Link: https://lore.kernel.org/r/20231121020701.26440-4-eddyz87@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit cd9aed6060 ]
nvme_configure_metadata() is issuing I/O, so we might incur an I/O
error which will cause the connection to be reset.
But in that case any further probing will race with reset and
cause UAF errors.
So return a status from nvme_configure_metadata() and abort
probing if there was an I/O error.
Signed-off-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: Keith Busch <kbusch@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 38ce1570e2 ]
Some error cases were not setting an auth-failure-reason-code-explanation.
This means an AUTH_Failure2 message will be sent with an explanation value
of 0 which is a reserved value.
Signed-off-by: Mark O'Donovan <shiftee@posteo.net>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Keith Busch <kbusch@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit c2da049f41 ]
Memory reordering may occur in nbd_genl_connect(), causing config_refs
to be set to 1 while nbd->config is still empty. Opening nbd at this
time will cause null-ptr-dereference.
T1 T2
nbd_open
nbd_get_config_unlocked
nbd_genl_connect
nbd_alloc_and_init_config
//memory reordered
refcount_set(&nbd->config_refs, 1) // 2
nbd->config
->null point
nbd->config = config // 1
Fix it by adding smp barrier to guarantee the execution sequence.
Signed-off-by: Li Nan <linan122@huawei.com>
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Link: https://lore.kernel.org/r/20231116162316.1740402-4-linan666@huaweicloud.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 3eba5e0b24 ]
In run_cache_set() after c->root returned from bch_btree_node_get(), it
is checked by IS_ERR_OR_NULL(). Indeed it is unncessary to check NULL
because bch_btree_node_get() will not return NULL pointer to caller.
This patch replaces IS_ERR_OR_NULL() by IS_ERR() for the above reason.
Signed-off-by: Coly Li <colyli@suse.de>
Link: https://lore.kernel.org/r/20231120052503.6122-11-colyli@suse.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit be93825f0e ]
Variable cur_idx is being initialized with a value that is never read,
it is being re-assigned later in a while-loop. Remove the redundant
assignment. Cleans up clang scan build warning:
drivers/md/bcache/writeback.c:916:2: warning: Value stored to 'cur_idx'
is never read [deadcode.DeadStores]
Signed-off-by: Colin Ian King <colin.i.king@gmail.com>
Reviewed-by: Coly Li <colyli@suse.de>
Signed-off-by: Coly Li <colyli@suse.de>
Link: https://lore.kernel.org/r/20231120052503.6122-4-colyli@suse.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit baf8fb7e0e ]
Arraies bcache->stripe_sectors_dirty and bcache->full_dirty_stripes are
used for dirty data writeback, their sizes are decided by backing device
capacity and stripe size. Larger backing device capacity or smaller
stripe size make these two arraies occupies more dynamic memory space.
Currently bcache->stripe_size is directly inherited from
queue->limits.io_opt of underlying storage device. For normal hard
drives, its limits.io_opt is 0, and bcache sets the corresponding
stripe_size to 1TB (1<<31 sectors), it works fine 10+ years. But for
devices do declare value for queue->limits.io_opt, small stripe_size
(comparing to 1TB) becomes an issue for oversize memory allocations of
bcache->stripe_sectors_dirty and bcache->full_dirty_stripes, while the
capacity of hard drives gets much larger in recent decade.
For example a raid5 array assembled by three 20TB hardrives, the raid
device capacity is 40TB with typical 512KB limits.io_opt. After the math
calculation in bcache code, these two arraies will occupy 400MB dynamic
memory. Even worse Andrea Tomassetti reports that a 4KB limits.io_opt is
declared on a new 2TB hard drive, then these two arraies request 2GB and
512MB dynamic memory from kzalloc(). The result is that bcache device
always fails to initialize on his system.
To avoid the oversize memory allocation, bcache->stripe_size should not
directly inherited by queue->limits.io_opt from the underlying device.
This patch defines BCH_MIN_STRIPE_SZ (4MB) as minimal bcache stripe size
and set bcache device's stripe size against the declared limits.io_opt
value from the underlying storage device,
- If the declared limits.io_opt > BCH_MIN_STRIPE_SZ, bcache device will
set its stripe size directly by this limits.io_opt value.
- If the declared limits.io_opt < BCH_MIN_STRIPE_SZ, bcache device will
set its stripe size by a value multiplying limits.io_opt and euqal or
large than BCH_MIN_STRIPE_SZ.
Then the minimal stripe size of a bcache device will always be >= 4MB.
For a 40TB raid5 device with 512KB limits.io_opt, memory occupied by
bcache->stripe_sectors_dirty and bcache->full_dirty_stripes will be 50MB
in total. For a 2TB hard drive with 4KB limits.io_opt, memory occupied
by these two arraies will be 2.5MB in total.
Such mount of memory allocated for bcache->stripe_sectors_dirty and
bcache->full_dirty_stripes is reasonable for most of storage devices.
Reported-by: Andrea Tomassetti <andrea.tomassetti-opensource@devo.com>
Signed-off-by: Coly Li <colyli@suse.de>
Reviewed-by: Eric Wheeler <bcache@lists.ewheeler.net>
Link: https://lore.kernel.org/r/20231120052503.6122-2-colyli@suse.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 7fbd5fc2b3 ]
Only present the DWMAC_LOONGSON option on architectures where it can
actually be used.
This follows the same logic as the DWMAC_INTEL option.
Signed-off-by: Jean Delvare <jdelvare@suse.de>
Cc: Keguang Zhang <keguang.zhang@gmail.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit ccab434e67 ]
If a device sends a packet that is inbetween 0
and sizeof(u64) the value passed to skb_trim()
as length will wrap around ending up as some very
large value.
The driver will then proceed to parse the header
located at that position, which will either oops or
process some random value.
The fix is to check against sizeof(u64) rather than
0, which the driver currently does. The issue exists
since the introduction of the driver.
Signed-off-by: Oliver Neukum <oneukum@suse.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 7e8037b099 ]
A Gen2 VM doesn't support legacy PCI/PCIe, so both raw_pci_ops and
raw_pci_ext_ops are NULL, and pci_subsys_init() -> pcibios_init()
doesn't call pcibios_resource_survey() -> e820__reserve_resources_late();
as a result, any emulated persistent memory of E820_TYPE_PRAM (12) via
the kernel parameter memmap=nn[KMG]!ss is not added into iomem_resource
and hence can't be detected by register_e820_pmem().
Fix this by directly calling e820__reserve_resources_late() in
hv_pci_init(), which is called from arch_initcall(pci_arch_init).
It's ok to move a Gen2 VM's e820__reserve_resources_late() from
subsys_initcall(pci_subsys_init) to arch_initcall(pci_arch_init) because
the code in-between doesn't depend on the E820 resources.
e820__reserve_resources_late() depends on e820__reserve_resources(),
which has been called earlier from setup_arch().
For a Gen-2 VM, the new hv_pci_init() also adds any memory of
E820_TYPE_PMEM (7) into iomem_resource, and acpi_nfit_register_region() ->
acpi_nfit_insert_resource() -> region_intersects() returns
REGION_INTERSECTS, so the memory of E820_TYPE_PMEM won't get added twice.
Changed the local variable "int gen2vm" to "bool gen2vm".
Signed-off-by: Saurabh Sengar <ssengar@linux.microsoft.com>
Signed-off-by: Dexuan Cui <decui@microsoft.com>
Signed-off-by: Wei Liu <wei.liu@kernel.org>
Message-ID: <1699691867-9827-1-git-send-email-ssengar@linux.microsoft.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit a6fcd57cf2 ]
Doing a ksft_print_msg() before the ksft_print_header() seems to confuse
the ksft framework in a strange way: running the test on the cmdline
results in the expected output.
But piping the output somewhere else, results in some odd output,
whereby we repeatedly get the same info printed:
# [INFO] detected THP size: 2048 KiB
# [INFO] detected hugetlb page size: 2048 KiB
# [INFO] detected hugetlb page size: 1048576 KiB
# [INFO] huge zeropage is enabled
TAP version 13
1..190
# [INFO] Anonymous memory tests in private mappings
# [RUN] Basic COW after fork() ... with base page
# [INFO] detected THP size: 2048 KiB
# [INFO] detected hugetlb page size: 2048 KiB
# [INFO] detected hugetlb page size: 1048576 KiB
# [INFO] huge zeropage is enabled
TAP version 13
1..190
# [INFO] Anonymous memory tests in private mappings
# [RUN] Basic COW after fork() ... with base page
ok 1 No leak from parent into child
# [RUN] Basic COW after fork() ... with swapped out base page
# [INFO] detected THP size: 2048 KiB
# [INFO] detected hugetlb page size: 2048 KiB
# [INFO] detected hugetlb page size: 1048576 KiB
# [INFO] huge zeropage is enabled
Doing the ksft_print_header() first seems to resolve that and gives us
the output we expect:
TAP version 13
# [INFO] detected THP size: 2048 KiB
# [INFO] detected hugetlb page size: 2048 KiB
# [INFO] detected hugetlb page size: 1048576 KiB
# [INFO] huge zeropage is enabled
1..190
# [INFO] Anonymous memory tests in private mappings
# [RUN] Basic COW after fork() ... with base page
ok 1 No leak from parent into child
# [RUN] Basic COW after fork() ... with swapped out base page
ok 2 No leak from parent into child
# [RUN] Basic COW after fork() ... with THP
ok 3 No leak from parent into child
# [RUN] Basic COW after fork() ... with swapped-out THP
ok 4 No leak from parent into child
# [RUN] Basic COW after fork() ... with PTE-mapped THP
ok 5 No leak from parent into child
Link: https://lkml.kernel.org/r/20231206103558.38040-1-david@redhat.com
Fixes: f4b5fd6946 ("selftests/vm: anon_cow: THP tests")
Signed-off-by: David Hildenbrand <david@redhat.com>
Reported-by: Nico Pache <npache@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 1f721a93a5 ]
Commit 503579448d ("drm/i915/gsc: Mark internal GSC engine with reserved uabi class")
made the GSC0 engine not have a valid uabi class and so broke the engine
reset counting, which in turn was made class based in cb823ed991 ("drm/i915/gt: Use intel_gt as the primary object for handling resets").
Despite the title and commit text of the latter is not mentioning it (and
has left the storage array incorrectly sized), tracking by class, despite
it adding aliasing in hypthotetical multi-tile systems, is handy for
virtual engines which for instance do not have a valid engine->id.
Therefore we keep that but just change it to use the internal class which
is always valid. We also add a helper to increment the count, which
aligns with the existing getter.
What was broken without this fix were out of bounds reads every time a
reset would happen on the GSC0 engine, or during selftests when storing
and cross-checking the counts in igt_live_test_begin and
igt_live_test_end.
Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Fixes: 503579448d ("drm/i915/gsc: Mark internal GSC engine with reserved uabi class")
[tursulin: fixed Fixes tag]
Reported-by: Alan Previn Teres Alexis <alan.previn.teres.alexis@intel.com>
Cc: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Reviewed-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20231201122109.729006-2-tvrtko.ursulin@linux.intel.com
(cherry picked from commit cf9cb028ac)
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 35c49cfc8b ]
Using PCI Device ID/Revision to initialize the interrupt_clear_with_0
workaround is problematic - there are many pre-production
steppings with different behavior, even with the same PCI ID/Revision
Instead of checking for PCI Device ID/Revision, check the VPU
buttress interrupt status register behavior - if this register
is not zero after writing 1s it means there register is RW
instead of RW1C and we need to enable the interrupt_clear_with_0
workaround.
Fixes: 7f34e01f77 ("accel/ivpu: Clear specific interrupt status bits on C0")
Signed-off-by: Andrzej Kacprowski <Andrzej.Kacprowski@intel.com>
Signed-off-by: Jacek Lawrynowicz <jacek.lawrynowicz@linux.intel.com>
Reviewed-by: Jeffrey Hugo <quic_jhugo@quicinc.com>
Link: https://lore.kernel.org/all/20231204122331.40560-1-jacek.lawrynowicz@linux.intel.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
commit 1373665448 upstream.
MS confirm that "AISi" name of SMB2_CREATE_ALLOCATION_SIZE in MS-SMB2
specification is a typo. cifs/ksmbd have been using this wrong name from
MS-SMB2. It should be "AlSi". Also It will cause problem when running
smb2.create.open test in smbtorture against ksmbd.
Cc: stable@vger.kernel.org
Fixes: 12197a7fdd ("Clarify SMB2/SMB3 create context and add missing ones")
Signed-off-by: Namjae Jeon <linkinjeon@kernel.org>
Reviewed-by: Paulo Alcantara (SUSE) <pc@manguebit.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit ef61a04057 upstream.
This is a partial revert of 8b3517f88f ("PCI: loongson: Prevent LS7A MRRS
increases") for MIPS-based Loongson.
Some MIPS Loongson systems don't support arbitrary Max_Read_Request_Size
(MRRS) settings. 8b3517f88f ("PCI: loongson: Prevent LS7A MRRS
increases") worked around that by (1) assuming that firmware configured
MRRS to the maximum supported value and (2) preventing the PCI core from
increasing MRRS.
Unfortunately, some firmware doesn't set that maximum MRRS correctly, which
results in devices not being initialized correctly. One symptom, from the
Debian report below, is this:
ata4.00: exception Emask 0x0 SAct 0x20000000 SErr 0x0 action 0x6 frozen
ata4.00: failed command: WRITE FPDMA QUEUED
ata4.00: cmd 61/20:e8:00:f0:e1/00:00:00:00:00/40 tag 29 ncq dma 16384 out
res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
ata4.00: status: { DRDY }
ata4: hard resetting link
Limit MRRS to 256 because MIPS Loongson with higher MRRS support is
considered rare.
This must be done at device enablement stage because the MRRS setting may
get lost if PCI_COMMAND_MASTER on the parent bridge is cleared, and we are
only sure parent bridge is enabled at this point.
Fixes: 8b3517f88f ("PCI: loongson: Prevent LS7A MRRS increases")
Closes: https://bugzilla.kernel.org/show_bug.cgi?id=217680
Link: https://bugs.debian.org/cgi-bin/bugreport.cgi?bug=1035587
Link: https://lore.kernel.org/r/20231201115028.84351-1-jiaxun.yang@flygoat.com
Signed-off-by: Jiaxun Yang <jiaxun.yang@flygoat.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Acked-by: Huacai Chen <chenhuacai@loongson.cn>
Cc: stable@vger.kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 5df12742b7 upstream.
This reverts commit 40613da52b and the
subsequent fix to it:
cc22522fd5 ("PCI: acpiphp: Use pci_assign_unassigned_bridge_resources() only for non-root bus")
40613da52b fixed a problem where hot-adding a device with large BARs
failed if the bridge windows programmed by firmware were not large enough.
cc22522fd5 ("PCI: acpiphp: Use pci_assign_unassigned_bridge_resources()
only for non-root bus") fixed a problem with 40613da52b: an ACPI hot-add
of a device on a PCI root bus (common in the virt world) or firmware
sending ACPI Bus Check to non-existent Root Ports (e.g., on Dell Inspiron
7352/0W6WV0) caused a NULL pointer dereference and suspend/resume hangs.
Unfortunately the combination of 40613da52b and cc22522fd5 caused other
problems:
- Fiona reported that hot-add of SCSI disks in QEMU virtual machine fails
sometimes.
- Dongli reported a similar problem with hot-add of SCSI disks.
- Jonathan reported a console freeze during boot on bare metal due to an
error in radeon GPU initialization.
Revert both patches to avoid adding these problems. This means we will
again see the problems with hot-adding devices with large BARs and the NULL
pointer dereferences and suspend/resume issues that 40613da52b and
cc22522fd5 were intended to fix.
Fixes: 40613da52b ("PCI: acpiphp: Reassign resources on bridge if necessary")
Fixes: cc22522fd5 ("PCI: acpiphp: Use pci_assign_unassigned_bridge_resources() only for non-root bus")
Reported-by: Fiona Ebner <f.ebner@proxmox.com>
Closes: https://lore.kernel.org/r/9eb669c0-d8f2-431d-a700-6da13053ae54@proxmox.com
Reported-by: Dongli Zhang <dongli.zhang@oracle.com>
Closes: https://lore.kernel.org/r/3c4a446a-b167-11b8-f36f-d3c1b49b42e9@oracle.com
Reported-by: Jonathan Woithe <jwoithe@just42.net>
Closes: https://lore.kernel.org/r/ZXpaNCLiDM+Kv38H@marvin.atrad.com.au
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Acked-by: Igor Mammedov <imammedo@redhat.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 6c6fa26414 upstream.
If the module can load the RCA but not the firmware binary, it will call
the cleanup functions. Then unloading the module causes general
protection fault due to double free.
Do not call the cleanup functions in tasdev_fw_ready.
general protection fault, probably for non-canonical address
0x6f2b8a2bff4c8fec: 0000 [#1] PREEMPT SMP NOPTI
Call Trace:
<TASK>
? die_addr+0x36/0x90
? exc_general_protection+0x1c5/0x430
? asm_exc_general_protection+0x26/0x30
? tasdevice_config_info_remove+0x6d/0xd0 [snd_soc_tas2781_fmwlib]
tas2781_hda_unbind+0xaa/0x100 [snd_hda_scodec_tas2781_i2c]
component_unbind+0x2e/0x50
component_unbind_all+0x92/0xa0
component_del+0xa8/0x140
tas2781_hda_remove.isra.0+0x32/0x60 [snd_hda_scodec_tas2781_i2c]
i2c_device_remove+0x26/0xb0
Fixes: 5be27f1e3e ("ALSA: hda/tas2781: Add tas2781 HDA driver")
CC: stable@vger.kernel.org
Signed-off-by: Gergo Koteles <soyer@irl.hu>
Link: https://lore.kernel.org/r/1a0885c424bb21172702d254655882b59ef6477a.1702510018.git.soyer@irl.hu
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 3307142271 upstream.
The code does not properly check whether the calibration variable is
available in the EFI. If it is not available, it causes a NULL pointer
dereference.
Check the return value of the first get_variable call also.
BUG: kernel NULL pointer dereference, address: 0000000000000000
Call Trace:
<TASK>
? __die+0x23/0x70
? page_fault_oops+0x171/0x4e0
? srso_alias_return_thunk+0x5/0x7f
? schedule+0x5e/0xd0
? exc_page_fault+0x7f/0x180
? asm_exc_page_fault+0x26/0x30
? crc32_body+0x2c/0x120
? tas2781_save_calibration+0xe4/0x220 [snd_hda_scodec_tas2781_i2c]
tasdev_fw_ready+0x1af/0x280 [snd_hda_scodec_tas2781_i2c]
request_firmware_work_func+0x59/0xa0
Fixes: 5be27f1e3e ("ALSA: hda/tas2781: Add tas2781 HDA driver")
CC: stable@vger.kernel.org
Signed-off-by: Gergo Koteles <soyer@irl.hu>
Link: https://lore.kernel.org/r/f1f6583bda918f78556f67d522ca7b3b91cebbd5.1702251102.git.soyer@irl.hu
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Heiko Carstens
Nguyen Dinh Phi
Aoba K
Denis Benato
Li Nan
Oliver Neukum
Brett Raye
Yihong Cao
Hamish Martin
Andy Shevchenko
Bibo Mao
Huacai Chen
WANG Rui
Masahiro Yamada
Eduard Zingerman
Hannes Reinecke
Mark O'Donovan
Coly Li
Colin Ian King
Ming Lei
David Howells
Jean Delvare
Saurabh Sengar
David Hildenbrand
Tvrtko Ursulin
Andrzej Kacprowski
Stanislaw Gruszka
Jason-JH.Lin
Michael Walle
Johan Hovold
Namjae Jeon
Jiaxun Yang
Bjorn Helgaas
Gergo Koteles
Hartmut Knaack
Kai Vehmanen