[ Upstream commit f59f93cd1d ]
During disconnect USB-3 ports often go via SS.Inactive link error state
before the missing terminations are noticed, and link finally goes to
RxDetect state
Avoid immediately warm-resetting ports in SS.Inactive state.
Let ports settle for a while and re-read the link status a few times 20ms
apart to see if the ports transitions out of SS.Inactive.
According to USB 3.x spec 7.5.2, a port in SS.Inactive should
automatically check for missing far-end receiver termination every
12 ms (SSInactiveQuietTimeout)
The futile multiple warm reset retries of a disconnected device takes
a lot of time, also the resetting of a removed devices has caused cases
where the reset bit got stuck for a long time on xHCI roothub.
This lead to issues in detecting new devices connected to the same port
shortly after.
Tested-by: Mark Pearson <markpearson@lenovo.com>
Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Link: https://lore.kernel.org/r/20211210111653.1378381-1-mathias.nyman@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Stable-dep-of: 2521106fc7 ("usb: hub: Don't try to recover devices lost during warm reset.")
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit d66e1e90b1 ]
Ensure that sysfs init doesn't fail for new/unrecognized bank types or if
a bank has additional blocks available.
Most MCA banks have a single thresholding block, so the block takes the same
name as the bank.
Unified Memory Controllers (UMCs) are a special case where there are two
blocks and each has a unique name.
However, the microarchitecture allows for five blocks. Any new MCA bank types
with more than one block will be missing names for the extra blocks. The MCE
sysfs will fail to initialize in this case.
Fixes: 87a6d4091b ("x86/mce/AMD: Update sysfs bank names for SMCA systems")
Signed-off-by: Yazen Ghannam <yazen.ghannam@amd.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/20250624-wip-mca-updates-v4-3-236dd74f645f@amd.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 87c4e1459e ]
After commit d5c8d6e0fa ("kbuild: Update assembler calls to use proper
flags and language target"), which updated as-instr to use the
'assembler-with-cpp' language option, the Kbuild version of as-instr
always fails internally for arch/arm with
<command-line>: fatal error: asm/unified.h: No such file or directory
compilation terminated.
because '-include' flags are now taken into account by the compiler
driver and as-instr does not have '$(LINUXINCLUDE)', so unified.h is not
found.
This went unnoticed at the time of the Kbuild change because the last
use of as-instr in Kbuild that arch/arm could reach was removed in 5.7
by commit 541ad0150c ("arm: Remove 32bit KVM host support") but a
stable backport of the Kbuild change to before that point exposed this
potential issue if one were to be reintroduced.
Follow the general pattern of '-include' paths throughout the tree and
make unified.h absolute using '$(srctree)' to ensure KBUILD_AFLAGS can
be used independently.
Closes: https://lore.kernel.org/CACo-S-1qbCX4WAVFA63dWfHtrRHZBTyyr2js8Lx=Az03XHTTHg@mail.gmail.com/
Cc: stable@vger.kernel.org
Fixes: d5c8d6e0fa ("kbuild: Update assembler calls to use proper flags and language target")
Reported-by: KernelCI bot <bot@kernelci.org>
Reviewed-by: Masahiro Yamada <masahiroy@kernel.org>
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
[ adapted to missing -Wa ]
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit d42e6c20de ]
`cpu_switch_to()` and `call_on_irq_stack()` manipulate SP to change
to different stacks along with the Shadow Call Stack if it is enabled.
Those two stack changes cannot be done atomically and both functions
can be interrupted by SErrors or Debug Exceptions which, though unlikely,
is very much broken : if interrupted, we can end up with mismatched stacks
and Shadow Call Stack leading to clobbered stacks.
In `cpu_switch_to()`, it can happen when SP_EL0 points to the new task,
but x18 stills points to the old task's SCS. When the interrupt handler
tries to save the task's SCS pointer, it will save the old task
SCS pointer (x18) into the new task struct (pointed to by SP_EL0),
clobbering it.
In `call_on_irq_stack()`, it can happen when switching from the task stack
to the IRQ stack and when switching back. In both cases, we can be
interrupted when the SCS pointer points to the IRQ SCS, but SP points to
the task stack. The nested interrupt handler pushes its return addresses
on the IRQ SCS. It then detects that SP points to the task stack,
calls `call_on_irq_stack()` and clobbers the task SCS pointer with
the IRQ SCS pointer, which it will also use !
This leads to tasks returning to addresses on the wrong SCS,
or even on the IRQ SCS, triggering kernel panics via CONFIG_VMAP_STACK
or FPAC if enabled.
This is possible on a default config, but unlikely.
However, when enabling CONFIG_ARM64_PSEUDO_NMI, DAIF is unmasked and
instead the GIC is responsible for filtering what interrupts the CPU
should receive based on priority.
Given the goal of emulating NMIs, pseudo-NMIs can be received by the CPU
even in `cpu_switch_to()` and `call_on_irq_stack()`, possibly *very*
frequently depending on the system configuration and workload, leading
to unpredictable kernel panics.
Completely mask DAIF in `cpu_switch_to()` and restore it when returning.
Do the same in `call_on_irq_stack()`, but restore and mask around
the branch.
Mask DAIF even if CONFIG_SHADOW_CALL_STACK is not enabled for consistency
of behaviour between all configurations.
Introduce and use an assembly macro for saving and masking DAIF,
as the existing one saves but only masks IF.
Cc: <stable@vger.kernel.org>
Signed-off-by: Ada Couprie Diaz <ada.coupriediaz@arm.com>
Reported-by: Cristian Prundeanu <cpru@amazon.com>
Fixes: 59b37fe52f ("arm64: Stash shadow stack pointer in the task struct on interrupt")
Tested-by: Cristian Prundeanu <cpru@amazon.com>
Acked-by: Will Deacon <will@kernel.org>
Link: https://lore.kernel.org/r/20250718142814.133329-1-ada.coupriediaz@arm.com
Signed-off-by: Will Deacon <will@kernel.org>
[ removed duplicate save_and_disable_daif macro ]
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 15f77764e9 ]
When application A submits jobs and application B submits a job with a
dependency on A's fence, the normal flow wakes up the scheduler after
processing each job. However, the optimization in
drm_sched_entity_add_dependency_cb() uses a callback that only clears
dependencies without waking up the scheduler.
When application A is killed before its jobs can run, the callback gets
triggered but only clears the dependency without waking up the scheduler,
causing the scheduler to enter sleep state and application B to hang.
Remove the optimization by deleting drm_sched_entity_clear_dep() and its
usage, ensuring the scheduler is always woken up when dependencies are
cleared.
Fixes: 777dbd458c ("drm/amdgpu: drop a dummy wakeup scheduler")
Cc: stable@vger.kernel.org # v4.6+
Signed-off-by: Lin.Cao <lincao12@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Philipp Stanner <phasta@kernel.org>
Link: https://lore.kernel.org/r/20250717084453.921097-1-lincao12@amd.com
[ Changed drm_sched_wakeup_if_can_queue() calls to drm_sched_wakeup() ]
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 8ec396d05d ]
Patch series "mm: reinstate ability to map write-sealed memfd mappings
read-only".
In commit 158978945f ("mm: perform the mapping_map_writable() check
after call_mmap()") (and preceding changes in the same series) it became
possible to mmap() F_SEAL_WRITE sealed memfd mappings read-only.
Commit 5de195060b ("mm: resolve faulty mmap_region() error path
behaviour") unintentionally undid this logic by moving the
mapping_map_writable() check before the shmem_mmap() hook is invoked,
thereby regressing this change.
This series reworks how we both permit write-sealed mappings being mapped
read-only and disallow mprotect() from undoing the write-seal, fixing this
regression.
We also add a regression test to ensure that we do not accidentally
regress this in future.
Thanks to Julian Orth for reporting this regression.
This patch (of 2):
In commit 158978945f ("mm: perform the mapping_map_writable() check
after call_mmap()") (and preceding changes in the same series) it became
possible to mmap() F_SEAL_WRITE sealed memfd mappings read-only.
This was previously unnecessarily disallowed, despite the man page
documentation indicating that it would be, thereby limiting the usefulness
of F_SEAL_WRITE logic.
We fixed this by adapting logic that existed for the F_SEAL_FUTURE_WRITE
seal (one which disallows future writes to the memfd) to also be used for
F_SEAL_WRITE.
For background - the F_SEAL_FUTURE_WRITE seal clears VM_MAYWRITE for a
read-only mapping to disallow mprotect() from overriding the seal - an
operation performed by seal_check_write(), invoked from shmem_mmap(), the
f_op->mmap() hook used by shmem mappings.
By extending this to F_SEAL_WRITE and critically - checking
mapping_map_writable() to determine if we may map the memfd AFTER we
invoke shmem_mmap() - the desired logic becomes possible. This is because
mapping_map_writable() explicitly checks for VM_MAYWRITE, which we will
have cleared.
Commit 5de195060b ("mm: resolve faulty mmap_region() error path
behaviour") unintentionally undid this logic by moving the
mapping_map_writable() check before the shmem_mmap() hook is invoked,
thereby regressing this change.
We reinstate this functionality by moving the check out of shmem_mmap()
and instead performing it in do_mmap() at the point at which VMA flags are
being determined, which seems in any case to be a more appropriate place
in which to make this determination.
In order to achieve this we rework memfd seal logic to allow us access to
this information using existing logic and eliminate the clearing of
VM_MAYWRITE from seal_check_write() which we are performing in do_mmap()
instead.
Link: https://lkml.kernel.org/r/99fc35d2c62bd2e05571cf60d9f8b843c56069e0.1732804776.git.lorenzo.stoakes@oracle.com
Fixes: 5de195060b ("mm: resolve faulty mmap_region() error path behaviour")
Signed-off-by: Lorenzo Stoakes <lorenzo.stoakes@oracle.com>
Reported-by: Julian Orth <ju.orth@gmail.com>
Closes: https://lore.kernel.org/all/CAHijbEUMhvJTN9Xw1GmbM266FXXv=U7s4L_Jem5x3AaPZxrYpQ@mail.gmail.com/
Cc: Jann Horn <jannh@google.com>
Cc: Liam R. Howlett <Liam.Howlett@Oracle.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Shuah Khan <shuah@kernel.org>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Isaac J. Manjarres <isaacmanjarres@google.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit e8e17ee90e ]
Patch series "permit write-sealed memfd read-only shared mappings", v4.
The man page for fcntl() describing memfd file seals states the following
about F_SEAL_WRITE:-
Furthermore, trying to create new shared, writable memory-mappings via
mmap(2) will also fail with EPERM.
With emphasis on 'writable'. In turns out in fact that currently the
kernel simply disallows all new shared memory mappings for a memfd with
F_SEAL_WRITE applied, rendering this documentation inaccurate.
This matters because users are therefore unable to obtain a shared mapping
to a memfd after write sealing altogether, which limits their usefulness.
This was reported in the discussion thread [1] originating from a bug
report [2].
This is a product of both using the struct address_space->i_mmap_writable
atomic counter to determine whether writing may be permitted, and the
kernel adjusting this counter when any VM_SHARED mapping is performed and
more generally implicitly assuming VM_SHARED implies writable.
It seems sensible that we should only update this mapping if VM_MAYWRITE
is specified, i.e. whether it is possible that this mapping could at any
point be written to.
If we do so then all we need to do to permit write seals to function as
documented is to clear VM_MAYWRITE when mapping read-only. It turns out
this functionality already exists for F_SEAL_FUTURE_WRITE - we can
therefore simply adapt this logic to do the same for F_SEAL_WRITE.
We then hit a chicken and egg situation in mmap_region() where the check
for VM_MAYWRITE occurs before we are able to clear this flag. To work
around this, perform this check after we invoke call_mmap(), with careful
consideration of error paths.
Thanks to Andy Lutomirski for the suggestion!
[1]:https://lore.kernel.org/all/20230324133646.16101dfa666f253c4715d965@linux-foundation.org/
[2]:https://bugzilla.kernel.org/show_bug.cgi?id=217238
This patch (of 3):
There is a general assumption that VMAs with the VM_SHARED flag set are
writable. If the VM_MAYWRITE flag is not set, then this is simply not the
case.
Update those checks which affect the struct address_space->i_mmap_writable
field to explicitly test for this by introducing
[vma_]is_shared_maywrite() helper functions.
This remains entirely conservative, as the lack of VM_MAYWRITE guarantees
that the VMA cannot be written to.
Link: https://lkml.kernel.org/r/cover.1697116581.git.lstoakes@gmail.com
Link: https://lkml.kernel.org/r/d978aefefa83ec42d18dfa964ad180dbcde34795.1697116581.git.lstoakes@gmail.com
Signed-off-by: Lorenzo Stoakes <lstoakes@gmail.com>
Suggested-by: Andy Lutomirski <luto@kernel.org>
Reviewed-by: Jan Kara <jack@suse.cz>
Cc: Alexander Viro <viro@zeniv.linux.org.uk>
Cc: Christian Brauner <brauner@kernel.org>
Cc: Hugh Dickins <hughd@google.com>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Mike Kravetz <mike.kravetz@oracle.com>
Cc: Muchun Song <muchun.song@linux.dev>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Cc: stable@vger.kernel.org
[isaacmanjarres: resolved merge conflicts due to
due to refactoring that happened in upstream commit
5de195060b ("mm: resolve faulty mmap_region() error path behaviour")]
Signed-off-by: Isaac J. Manjarres <isaacmanjarres@google.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit ccab044697 upstream.
When skb_ext_add(skb, SKB_EXT_MPTCP) fails in mptcp_incoming_options(),
we used to return true, letting the segment proceed through the TCP
receive path without a DSS mapping. Such segments can leave inconsistent
mapping state and trigger a mid-stream fallback to TCP, which in testing
collapsed (by artificially forcing failures in skb_ext_add) throughput
to zero.
Return false instead so the TCP input path drops the skb (see
tcp_data_queue() and step-7 processing). This is the safer choice
under memory pressure: it preserves MPTCP correctness and provides
backpressure to the sender.
Control packets remain unaffected: ACK updates and DATA_FIN handling
happen before attempting the extension allocation, and tcp_reset()
continues to ignore the return value.
With this change, MPTCP continues to work at high throughput if we
artificially inject failures into skb_ext_add.
Fixes: 6787b7e350 ("mptcp: avoid processing packet if a subflow reset")
Cc: stable@vger.kernel.org
Signed-off-by: Christoph Paasch <cpaasch@openai.com>
Reviewed-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://patch.msgid.link/20250815-net-mptcp-misc-fixes-6-17-rc2-v1-1-521fe9957892@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 7af76e9d18 upstream.
Receiving HSR frame with insufficient space to hold HSR tag in the skb
can result in a crash (kernel BUG):
[ 45.390915] skbuff: skb_under_panic: text:ffffffff86f32cac len:26 put:14 head:ffff888042418000 data:ffff888042417ff4 tail:0xe end:0x180 dev:bridge_slave_1
[ 45.392559] ------------[ cut here ]------------
[ 45.392912] kernel BUG at net/core/skbuff.c:211!
[ 45.393276] Oops: invalid opcode: 0000 [#1] SMP DEBUG_PAGEALLOC KASAN NOPTI
[ 45.393809] CPU: 1 UID: 0 PID: 2496 Comm: reproducer Not tainted 6.15.0 #12 PREEMPT(undef)
[ 45.394433] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.16.3-0-ga6ed6b701f0a-prebuilt.qemu.org 04/01/2014
[ 45.395273] RIP: 0010:skb_panic+0x15b/0x1d0
<snip registers, remove unreliable trace>
[ 45.402911] Call Trace:
[ 45.403105] <IRQ>
[ 45.404470] skb_push+0xcd/0xf0
[ 45.404726] br_dev_queue_push_xmit+0x7c/0x6c0
[ 45.406513] br_forward_finish+0x128/0x260
[ 45.408483] __br_forward+0x42d/0x590
[ 45.409464] maybe_deliver+0x2eb/0x420
[ 45.409763] br_flood+0x174/0x4a0
[ 45.410030] br_handle_frame_finish+0xc7c/0x1bc0
[ 45.411618] br_handle_frame+0xac3/0x1230
[ 45.413674] __netif_receive_skb_core.constprop.0+0x808/0x3df0
[ 45.422966] __netif_receive_skb_one_core+0xb4/0x1f0
[ 45.424478] __netif_receive_skb+0x22/0x170
[ 45.424806] process_backlog+0x242/0x6d0
[ 45.425116] __napi_poll+0xbb/0x630
[ 45.425394] net_rx_action+0x4d1/0xcc0
[ 45.427613] handle_softirqs+0x1a4/0x580
[ 45.427926] do_softirq+0x74/0x90
[ 45.428196] </IRQ>
This issue was found by syzkaller.
The panic happens in br_dev_queue_push_xmit() once it receives a
corrupted skb with ETH header already pushed in linear data. When it
attempts the skb_push() call, there's not enough headroom and
skb_push() panics.
The corrupted skb is put on the queue by HSR layer, which makes a
sequence of unintended transformations when it receives a specific
corrupted HSR frame (with incomplete TAG).
Fix it by dropping and consuming frames that are not long enough to
contain both ethernet and hsr headers.
Alternative fix would be to check for enough headroom before skb_push()
in br_dev_queue_push_xmit().
In the reproducer, this is injected via AF_PACKET, but I don't easily
see why it couldn't be sent over the wire from adjacent network.
Further Details:
In the reproducer, the following network interface chain is set up:
┌────────────────┐ ┌────────────────┐
│ veth0_to_hsr ├───┤ hsr_slave0 ┼───┐
└────────────────┘ └────────────────┘ │
│ ┌──────┐
├─┤ hsr0 ├───┐
│ └──────┘ │
┌────────────────┐ ┌────────────────┐ │ │┌────────┐
│ veth1_to_hsr ┼───┤ hsr_slave1 ├───┘ └┤ │
└────────────────┘ └────────────────┘ ┌┼ bridge │
││ │
│└────────┘
│
┌───────┐ │
│ ... ├──────┘
└───────┘
To trigger the events leading up to crash, reproducer sends a corrupted
HSR frame with incomplete TAG, via AF_PACKET socket on 'veth0_to_hsr'.
The first HSR-layer function to process this frame is
hsr_handle_frame(). It and then checks if the
protocol is ETH_P_PRP or ETH_P_HSR. If it is, it calls
skb_set_network_header(skb, ETH_HLEN + HSR_HLEN), without checking that
the skb is long enough. For the crashing frame it is not, and hence the
skb->network_header and skb->mac_len fields are set incorrectly,
pointing after the end of the linear buffer.
I will call this a BUG#1 and it is what is addressed by this patch. In
the crashing scenario before the fix, the skb continues to go down the
hsr path as follows.
hsr_handle_frame() then calls this sequence
hsr_forward_skb()
fill_frame_info()
hsr->proto_ops->fill_frame_info()
hsr_fill_frame_info()
hsr_fill_frame_info() contains a check that intends to check whether the
skb actually contains the HSR header. But the check relies on the
skb->mac_len field which was erroneously setup due to BUG#1, so the
check passes and the execution continues back in the hsr_forward_skb():
hsr_forward_skb()
hsr_forward_do()
hsr->proto_ops->get_untagged_frame()
hsr_get_untagged_frame()
create_stripped_skb_hsr()
In create_stripped_skb_hsr(), a copy of the skb is created and is
further corrupted by operation that attempts to strip the HSR tag in a
call to __pskb_copy().
The skb enters create_stripped_skb_hsr() with ethernet header pushed in
linear buffer. The skb_pull(skb_in, HSR_HLEN) thus pulls 6 bytes of
ethernet header into the headroom, creating skb_in with a headroom of
size 8. The subsequent __pskb_copy() then creates an skb with headroom
of just 2 and skb->len of just 12, this is how it looks after the copy:
gdb) p skb->len
$10 = 12
(gdb) p skb->data
$11 = (unsigned char *) 0xffff888041e45382 "\252\252\252\252\252!\210\373",
(gdb) p skb->head
$12 = (unsigned char *) 0xffff888041e45380 ""
It seems create_stripped_skb_hsr() assumes that ETH header is pulled
in the headroom when it's entered, because it just pulls HSR header on
top. But that is not the case in our code-path and we end up with the
corrupted skb instead. I will call this BUG#2
*I got confused here because it seems that under no conditions can
create_stripped_skb_hsr() work well, the assumption it makes is not true
during the processing of hsr frames - since the skb_push() in
hsr_handle_frame to skb_pull in hsr_deliver_master(). I wonder whether I
missed something here.*
Next, the execution arrives in hsr_deliver_master(). It calls
skb_pull(ETH_HLEN), which just returns NULL - the SKB does not have
enough space for the pull (as it only has 12 bytes in total at this
point).
*The skb_pull() here further suggests that ethernet header is meant
to be pushed through the whole hsr processing and
create_stripped_skb_hsr() should pull it before doing the HSR header
pull.*
hsr_deliver_master() then puts the corrupted skb on the queue, it is
then picked up from there by bridge frame handling layer and finally
lands in br_dev_queue_push_xmit where it panics.
Cc: stable@kernel.org
Fixes: 48b491a5cc ("net: hsr: fix mac_len checks")
Reported-by: syzbot+a81f2759d022496b40ab@syzkaller.appspotmail.com
Signed-off-by: Jakub Acs <acsjakub@amazon.de>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Link: https://patch.msgid.link/20250819082842.94378-1-acsjakub@amazon.de
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 7af160aea2 upstream.
In the interrupt handler rain_interrupt(), the buffer full check on
rain->buf_len is performed before acquiring rain->buf_lock. This
creates a Time-of-Check to Time-of-Use (TOCTOU) race condition, as
rain->buf_len is concurrently accessed and modified in the work
handler rain_irq_work_handler() under the same lock.
Multiple interrupt invocations can race, with each reading buf_len
before it becomes full and then proceeding. This can lead to both
interrupts attempting to write to the buffer, incrementing buf_len
beyond its capacity (DATA_SIZE) and causing a buffer overflow.
Fix this bug by moving the spin_lock() to before the buffer full
check. This ensures that the check and the subsequent buffer modification
are performed atomically, preventing the race condition. An corresponding
spin_unlock() is added to the overflow path to correctly release the
lock.
This possible bug was found by an experimental static analysis tool
developed by our team.
Fixes: 0f314f6c2e ("[media] rainshadow-cec: new RainShadow Tech HDMI CEC driver")
Cc: stable@vger.kernel.org
Signed-off-by: Gui-Dong Han <hanguidong02@gmail.com>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 7e40e0bb77 upstream.
When an program is streaming (ffplay) and another program (qv4l2)
changes the TV standard from NTSC to PAL, the kernel crashes due to trying
to copy to unmapped memory.
Changing from NTSC to PAL increases the resolution in the usbtv struct,
but the video plane buffer isn't adjusted, so it overflows.
Fixes: 0e0fe3958f ("[media] usbtv: Add support for PAL video source")
Cc: stable@vger.kernel.org
Signed-off-by: Ludwig Disterhof <ludwig@disterhof.eu>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
[hverkuil: call vb2_is_busy instead of vb2_is_streaming]
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 5a0400aca5 upstream.
It's a common pattern in drivers to free the control handler's resources
and then return the handler's error code on drivers' error handling paths.
Alas, the v4l2_ctrl_handler_free() function also zeroes the error field,
effectively indicating successful return to the caller.
There's no apparent need to touch the error field while releasing the
control handler's resources and cleaning up stale pointers. Not touching
the handler's error field is a more certain way to address this problem
than changing all the users, in which case the pattern would be likely to
re-emerge in new drivers.
Do just that, don't touch the control handler's error field in
v4l2_ctrl_handler_free().
Fixes: 0996517cf8 ("V4L/DVB: v4l2: Add new control handling framework")
Cc: stable@vger.kernel.org
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Reviewed-by: Hans Verkuil <hverkuil@xs4all.nl>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 020f602b06 upstream.
Hynix hi556 support 8 test pattern modes:
hi556_test_pattern_menu[] = {
{
"Disabled",
"Solid Colour",
"100% Colour Bars",
"Fade To Grey Colour Bars",
"PN9",
"Gradient Horizontal",
"Gradient Vertical",
"Check Board",
"Slant Pattern",
}
The test pattern is set by a 8-bit register according to the
specification.
+--------+-------------------------------+
| BIT[0] | Solid color |
+--------+-------------------------------+
| BIT[1] | Color bar |
+--------+-------------------------------+
| BIT[2] | Fade to grey color bar |
+--------+-------------------------------+
| BIT[3] | PN9 |
+--------+-------------------------------+
| BIT[4] | Gradient horizontal |
+--------+-------------------------------+
| BIT[5] | Gradient vertical |
+--------+-------------------------------+
| BIT[6] | Check board |
+--------+-------------------------------+
| BIT[7] | Slant pattern |
+--------+-------------------------------+
Based on function above, current test pattern programming is wrong.
This patch fixes it by 'BIT(pattern - 1)'. If pattern is 0, driver
will disable the test pattern generation and set the pattern to 0.
Fixes: e62138403a ("media: hi556: Add support for Hi-556 sensor")
Cc: stable@vger.kernel.org
Signed-off-by: Bingbu Cao <bingbu.cao@intel.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit aef89c0b24 upstream.
This sd_init() function reads the firmware. The firmware data holds a
series of records and the function reads each record and sends the data
to the device. The request_ihex_firmware() function
calls ihex_validate_fw() which ensures that the total length of all the
records won't read out of bounds of the fw->data[].
However, a potential issue is if there is a single very large
record (larger than PAGE_SIZE) and that would result in memory
corruption. Generally we trust the firmware, but it's always better to
double check.
Fixes: 49b61ec9b5 ("[media] gspca: Add new vicam subdriver")
Cc: stable@vger.kernel.org
Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit b6bcbce335 upstream.
After commit 13a4b7fb62 ("pmdomain: core: Leave powered-on genpds on
until late_initcall_sync") was applied, the Tegra210 Jetson TX1 board
failed to boot. Looking into this issue, before this commit was applied,
if any of the Tegra power-domains were in 'on' state when the kernel
booted, they were being turned off by the genpd core before any driver
had chance to request them. This was purely by luck and a consequence of
the power-domains being turned off earlier during boot. After this
commit was applied, any power-domains in the 'on' state are kept on for
longer during boot and therefore, may never transitioned to the off
state before they are requested/used. The hang on the Tegra210 Jetson
TX1 is caused because devices in some power-domains are accessed without
the power-domain being turned off and on, indicating that the
power-domain is not in a completely on state.
>From reviewing the Tegra PMC driver code, if a power-domain is in the
'on' state there is no guarantee that all the necessary clocks
associated with the power-domain are on and even if they are they would
not have been requested via the clock framework and so could be turned
off later. Some power-domains also have a 'clamping' register that needs
to be configured as well. In short, if a power-domain is already 'on' it
is difficult to know if it has been configured correctly. Given that the
power-domains happened to be switched off during boot previously, to
ensure that they are in a good known state on boot, fix this by
switching off any power-domains that are on initially when registering
the power-domains with the genpd framework.
Note that commit 05cfb988a4 ("soc/tegra: pmc: Initialise resets
associated with a power partition") updated the
tegra_powergate_of_get_resets() function to pass the 'off' to ensure
that the resets for the power-domain are in the correct state on boot.
However, now that we may power off a domain on boot, if it is on, it is
better to move this logic into the tegra_powergate_add() function so
that there is a single place where we are handling the initial state of
the power-domain.
Fixes: a38045121b ("soc/tegra: pmc: Add generic PM domain support")
Signed-off-by: Jon Hunter <jonathanh@nvidia.com>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20250731121832.213671-1-jonathanh@nvidia.com
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 9d98cf4632 upstream.
Both jbd2_log_do_checkpoint() and jbd2_journal_shrink_checkpoint_list()
periodically release j_list_lock after processing a batch of buffers to
avoid long hold times on the j_list_lock. However, since both functions
contend for j_list_lock, the combined time spent waiting and processing
can be significant.
jbd2_journal_shrink_checkpoint_list() explicitly calls cond_resched() when
need_resched() is true to avoid softlockups during prolonged operations.
But jbd2_log_do_checkpoint() only exits its loop when need_resched() is
true, relying on potentially sleeping functions like __flush_batch() or
wait_on_buffer() to trigger rescheduling. If those functions do not sleep,
the kernel may hit a softlockup.
watchdog: BUG: soft lockup - CPU#3 stuck for 156s! [kworker/u129:2:373]
CPU: 3 PID: 373 Comm: kworker/u129:2 Kdump: loaded Not tainted 6.6.0+ #10
Hardware name: Huawei TaiShan 2280 /BC11SPCD, BIOS 1.27 06/13/2017
Workqueue: writeback wb_workfn (flush-7:2)
pstate: 20000005 (nzCv daif -PAN -UAO -TCO -DIT -SSBS BTYPE=--)
pc : native_queued_spin_lock_slowpath+0x358/0x418
lr : jbd2_log_do_checkpoint+0x31c/0x438 [jbd2]
Call trace:
native_queued_spin_lock_slowpath+0x358/0x418
jbd2_log_do_checkpoint+0x31c/0x438 [jbd2]
__jbd2_log_wait_for_space+0xfc/0x2f8 [jbd2]
add_transaction_credits+0x3bc/0x418 [jbd2]
start_this_handle+0xf8/0x560 [jbd2]
jbd2__journal_start+0x118/0x228 [jbd2]
__ext4_journal_start_sb+0x110/0x188 [ext4]
ext4_do_writepages+0x3dc/0x740 [ext4]
ext4_writepages+0xa4/0x190 [ext4]
do_writepages+0x94/0x228
__writeback_single_inode+0x48/0x318
writeback_sb_inodes+0x204/0x590
__writeback_inodes_wb+0x54/0xf8
wb_writeback+0x2cc/0x3d8
wb_do_writeback+0x2e0/0x2f8
wb_workfn+0x80/0x2a8
process_one_work+0x178/0x3e8
worker_thread+0x234/0x3b8
kthread+0xf0/0x108
ret_from_fork+0x10/0x20
So explicitly call cond_resched() in jbd2_log_do_checkpoint() to avoid
softlockup.
Cc: stable@kernel.org
Signed-off-by: Baokun Li <libaokun1@huawei.com>
Link: https://patch.msgid.link/20250812063752.912130-1-libaokun@huaweicloud.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 910bdb8197 upstream.
An endpoint driver configfs attributes group is added to the
epf_group list of struct pci_epf_driver by pci_epf_add_cfs() but an
added group is not removed from this list when the attribute group is
unregistered with pci_ep_cfs_remove_epf_group().
Add the missing list_del() call in pci_ep_cfs_remove_epf_group()
to correctly remove the attribute group from the driver list.
With this change, once the loop over all attribute groups in
pci_epf_remove_cfs() completes, the driver epf_group list should be
empty. Add a WARN_ON() to make sure of that.
Fixes: ef1433f717 ("PCI: endpoint: Create configfs entry for each pci_epf_device_id table entry")
Signed-off-by: Damien Le Moal <dlemoal@kernel.org>
Signed-off-by: Manivannan Sadhasivam <mani@kernel.org>
Reviewed-by: Niklas Cassel <cassel@kernel.org>
Cc: stable@vger.kernel.org
Link: https://patch.msgid.link/20250624114544.342159-3-dlemoal@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit d79123d79a upstream.
Doing a list_del() on the epf_group field of struct pci_epf_driver in
pci_epf_remove_cfs() is not correct as this field is a list head, not
a list entry. This list_del() call triggers a KASAN warning when an
endpoint function driver which has a configfs attribute group is torn
down:
==================================================================
BUG: KASAN: slab-use-after-free in pci_epf_remove_cfs+0x17c/0x198
Write of size 8 at addr ffff00010f4a0d80 by task rmmod/319
CPU: 3 UID: 0 PID: 319 Comm: rmmod Not tainted 6.16.0-rc2 #1 NONE
Hardware name: Radxa ROCK 5B (DT)
Call trace:
show_stack+0x2c/0x84 (C)
dump_stack_lvl+0x70/0x98
print_report+0x17c/0x538
kasan_report+0xb8/0x190
__asan_report_store8_noabort+0x20/0x2c
pci_epf_remove_cfs+0x17c/0x198
pci_epf_unregister_driver+0x18/0x30
nvmet_pci_epf_cleanup_module+0x24/0x30 [nvmet_pci_epf]
__arm64_sys_delete_module+0x264/0x424
invoke_syscall+0x70/0x260
el0_svc_common.constprop.0+0xac/0x230
do_el0_svc+0x40/0x58
el0_svc+0x48/0xdc
el0t_64_sync_handler+0x10c/0x138
el0t_64_sync+0x198/0x19c
...
Remove this incorrect list_del() call from pci_epf_remove_cfs().
Fixes: ef1433f717 ("PCI: endpoint: Create configfs entry for each pci_epf_device_id table entry")
Signed-off-by: Damien Le Moal <dlemoal@kernel.org>
Signed-off-by: Manivannan Sadhasivam <mani@kernel.org>
Reviewed-by: Niklas Cassel <cassel@kernel.org>
Cc: stable@vger.kernel.org
Link: https://patch.msgid.link/20250624114544.342159-2-dlemoal@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 091d9e35b8 upstream.
Since commit 3d1f08b032 ("mtd: spinand: Use the external ECC engine
logic") the spinand_write_page() function ignores the errors returned
by spinand_wait(). Change the code to propagate those up to the stack
as it was done before the offending change.
Cc: stable@vger.kernel.org
Fixes: 3d1f08b032 ("mtd: spinand: Use the external ECC engine logic")
Signed-off-by: Gabor Juhos <j4g8y7@gmail.com>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 9c62e22829 upstream.
The Linux hwmon sysfs API values for pwmX_auto_pointY_pwm represent an
integer value between 0 (0%) to 255 (100%) and the pwmX_auto_pointY_temp
represent millidegrees Celcius.
Commit a6d80df47e ("hwmon: (gsc-hwmon) fix fan pwm temperature
scaling") properly addressed the incorrect scaling in the
pwm_auto_point_temp_store implementation but erroneously scaled
the pwm_auto_point_pwm_show (pwm value) instead of the
pwm_auto_point_temp_show (temp value) resulting in:
# cat /sys/class/hwmon/hwmon0/pwm1_auto_point6_pwm
25500
# cat /sys/class/hwmon/hwmon0/pwm1_auto_point6_temp
4500
Fix the scaling of these attributes:
# cat /sys/class/hwmon/hwmon0/pwm1_auto_point6_pwm
255
# cat /sys/class/hwmon/hwmon0/pwm1_auto_point6_temp
45000
Fixes: a6d80df47e ("hwmon: (gsc-hwmon) fix fan pwm temperature scaling")
Cc: stable@vger.kernel.org
Signed-off-by: Tim Harvey <tharvey@gateworks.com>
Link: https://lore.kernel.org/r/20250718200259.1840792-1-tharvey@gateworks.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 65c6f742ab upstream.
As per the i.MX93 TRM, section 67.3.2.1 "MOD register update", the value
of the TPM counter does NOT get updated when writing MOD.MOD unless
SC.CMOD != 0. Therefore, with the current code, assuming the following
sequence:
1) pwm_disable()
2) pwm_apply_might_sleep() /* period is changed here */
3) pwm_enable()
and assuming only one channel is active, if CNT.COUNT is higher than the
MOD.MOD value written during the pwm_apply_might_sleep() call then, when
re-enabling the PWM during pwm_enable(), the counter will end up resetting
after UINT32_MAX - CNT.COUNT + MOD.MOD cycles instead of MOD.MOD cycles as
normally expected.
Fix this problem by forcing a reset of the TPM counter before MOD.MOD is
written.
Fixes: 738a1cfec2 ("pwm: Add i.MX TPM PWM driver support")
Cc: stable@vger.kernel.org
Signed-off-by: Laurentiu Mihalcea <laurentiu.mihalcea@nxp.com>
Link: https://lore.kernel.org/r/20250728194144.22884-1-laurentiumihalcea111@gmail.com
Signed-off-by: Uwe Kleine-König <ukleinek@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit cf3fc03762 upstream.
Commit 8ae720449f ("libata: whitespace fixes in ata_to_sense_error()")
inadvertantly added the entry 0x40 (ATA_DRDY) to the stat_table array in
the function ata_to_sense_error(). This entry ties a failed qc which has
a status filed equal to ATA_DRDY to the sense key ILLEGAL REQUEST with
the additional sense code UNALIGNED WRITE COMMAND. This entry will be
used to generate a failed qc sense key and sense code when the qc is
missing sense data and there is no match for the qc error field in the
sense_table array of ata_to_sense_error().
As a result, for a failed qc for which we failed to get sense data (e.g.
read log 10h failed if qc is an NCQ command, or REQUEST SENSE EXT
command failed for the non-ncq case, the user very often end up seeing
the completely misleading "unaligned write command" error, even if qc
was not a write command. E.g.:
sd 0:0:0:0: [sda] tag#12 FAILED Result: hostbyte=DID_OK driverbyte=DRIVER_OK cmd_age=0s
sd 0:0:0:0: [sda] tag#12 Sense Key : Illegal Request [current]
sd 0:0:0:0: [sda] tag#12 Add. Sense: Unaligned write command
sd 0:0:0:0: [sda] tag#12 CDB: Read(10) 28 00 00 00 10 00 00 00 08 00
I/O error, dev sda, sector 4096 op 0x0:(READ) flags 0x80700 phys_seg 1 prio class 0
Fix this by removing the ATA_DRDY entry from the stat_table array so
that we default to always returning ABORTED COMMAND without any
additional sense code, since we do not know any better. The entry 0x08
(ATA_DRQ) is also removed since signaling ABORTED COMMAND with a parity
error is also misleading (as a parity error would likely be signaled
through a bus error). So for this case, also default to returning
ABORTED COMMAND without any additional sense code. With this, the
previous example error case becomes:
sd 0:0:0:0: [sda] tag#17 FAILED Result: hostbyte=DID_OK driverbyte=DRIVER_OK cmd_age=0s
sd 0:0:0:0: [sda] tag#17 Sense Key : Aborted Command [current]
sd 0:0:0:0: [sda] tag#17 Add. Sense: No additional sense information
sd 0:0:0:0: [sda] tag#17 CDB: Read(10) 28 00 00 00 10 00 00 00 08 00
I/O error, dev sda, sector 4096 op 0x0:(READ) flags 0x80700 phys_seg 1 prio class 0
Together with these fixes, refactor stat_table to make it more readable
by putting the entries comments in front of the entries and using the
defined status bits macros instead of hardcoded values.
Reported-by: Lorenz Brun <lorenz@brun.one>
Reported-by: Brandon Schwartz <Brandon.Schwartz@wdc.com>
Fixes: 8ae720449f ("libata: whitespace fixes in ata_to_sense_error()")
Cc: stable@vger.kernel.org
Signed-off-by: Damien Le Moal <dlemoal@kernel.org>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit c5e104a91e upstream.
When the file system is frozen in preparation for taking an LVM
snapshot, the journal is checkpointed and if the orphan_file feature
is enabled, and the orphan file is empty, we clear the orphan_present
feature flag. But if there are pending inodes that need to be removed
the orphan_present feature flag can't be cleared.
The problem comes if the block device is read-only. In that case, we
can't process the orphan inode list, so it is skipped in
ext4_orphan_cleanup(). But then in ext4_mark_recovery_complete(),
this results in the ext4 error "Orphan file not empty on read-only fs"
firing and the file system mount is aborted.
Fix this by clearing the needs_recovery flag in the block device is
read-only. We do this after the call to ext4_load_and_init-journal()
since there are some error checks need to be done in case the journal
needs to be replayed and the block device is read-only, or if the
block device containing the externa journal is read-only, etc.
Cc: stable@kernel.org
Link: https://bugs.debian.org/cgi-bin/bugreport.cgi?bug=1108271
Cc: stable@vger.kernel.org
Fixes: 02f310fcf4 ("ext4: Speedup ext4 orphan inode handling")
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 3ffbdd1f11 upstream.
In some cases like small FSes with no meta_bg and where the resize
doesn't need extra gdt blocks as it can fit in the current one,
s_reserved_gdt_blocks is set as 0, which causes fsmap to emit a 0
length entry, which is incorrect.
$ mkfs.ext4 -b 65536 -O bigalloc /dev/sda 5G
$ mount /dev/sda /mnt/scratch
$ xfs_io -c "fsmap -d" /mnt/scartch
0: 253:48 [0..127]: static fs metadata 128
1: 253:48 [128..255]: special 102:1 128
2: 253:48 [256..255]: special 102:2 0 <---- 0 len entry
3: 253:48 [256..383]: special 102:3 128
Fix this by adding a check for this case.
Cc: stable@kernel.org
Fixes: 0c9ec4beec ("ext4: support GETFSMAP ioctls")
Signed-off-by: Ojaswin Mujoo <ojaswin@linux.ibm.com>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Link: https://patch.msgid.link/08781b796453a5770112aa96ad14c864fbf31935.1754377641.git.ojaswin@linux.ibm.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Mathias Nyman
Yazen Ghannam
Zhang Lixu
Chao Yu
Nathan Chancellor
Ada Couprie Diaz
Lin.Cao
Haoxiang Li
Lorenzo Stoakes
Lorenzo Stoakes
Cong Wang
Matthieu Baerts (NGI0)
Christoph Paasch
Eric Biggers
Jakub Acs
Timur Kristóf
Mario Limonciello
Ricardo Ribalda
Jorge Ramirez-Ortiz
Vedang Nagar
Zhang Shurong
Gui-Dong Han
Ludwig Disterhof
Sakari Ailus
Bingbu Cao
Dan Carpenter
Jon Hunter
Baokun Li
Damien Le Moal
Thomas Fourier
Gabor Juhos
Tim Harvey
Laurentiu Mihalcea
Johan Hovold
Marek Szyprowski
Ranjan Kumar
Zhang Yi
Liao Yuanhong
Theodore Ts'o
Ojaswin Mujoo