Fix a potential out-of-bounds array access of the hw_xlate array in
bno055.c.
In bno055_get_regmask(), hw_xlate was iterated over the length of the
vals array instead of the length of the hw_xlate array. In the case of
bno055_gyr_scale, the vals array is larger than the hw_xlate array,
so this could result in an out-of-bounds access. In practice, this
shouldn't happen though because a match should always be found which
breaks out of the for loop before it iterates beyond the end of the
hw_xlate array.
By adding a new hw_xlate_len field to the bno055_sysfs_attr, we can be
sure we are iterating over the correct length.
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202507100510.rGt1YOOx-lkp@intel.com/
Fixes: 4aefe1c2bd ("iio: imu: add Bosch Sensortec BNO055 core driver")
Signed-off-by: David Lechner <dlechner@baylibre.com>
Link: https://patch.msgid.link/20250709-iio-const-data-19-v2-1-fb3fc9191251@baylibre.com
Cc: <Stable@vger.kernel.org>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Motivated by the W=1 warning about export.h that was introduced this cycle
this is an attempt to apply an approximation of the principles of including
whatever is used in the file directly.
Helped by the include-what-you-use tool.
Reasoning:
- Drop linux/moduleparam.h as completely unused.
- linux/array_size.h for ARRAY_SIZE()
- linux/bitmap.h for for_each_set_bit
- linux/errno.h for error codes.
- linux/export.h for EXPORT_SYMBOL*()
- linux/math64.h for do_div - alternative would be asm/div64.h
- linux/minmax.h for min()
- linux/sysfs.h for sysfs_emit()
- linux/time64.h for USEC_PER_MSEC
- linux/iio/buffer.h for iio_push_to_buffers_with_timestamp()
- asm/byteorder.h for le16_to_cpu()
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://patch.msgid.link/20250629183649.184479-1-jic23@kernel.org
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
The AD4170-4 design provides features to aid interfacing with weigh scales,
thermocouples, and RTD sensors, which are set up with additional circuitry
for proper sensor operation. A key characteristic of those sensors is that
the circuit they are in must be excited with a single, a pair, or two pairs
of signals. The external circuit can be excited either by a voltage supply
or by AD4170-4 excitation signals. The sensor can then be read through a
different pair of lines that are connected to the AD4170-4 ADC.
Extend the ad4170-4 driver to handle external circuit sensors.
Signed-off-by: Marcelo Schmitt <marcelo.schmitt@analog.com>
Link: https://patch.msgid.link/52686943040ecad34cc89833d4d5d37f1a51f412.1751895245.git.marcelo.schmitt@analog.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
The AD4170-4 chip can use an externally supplied clock at the XTAL2 pin, or
an external crystal connected to the XTAL1 and XTAL2 pins. Alternatively,
the AD4170-4 can provide its 16 MHz internal clock at the XTAL2 pin. In
addition, the chip has a programmable clock divider that allows dividing
the external or internal clock frequency, however, control for that is not
provided in this patch. Extend the AD4170-4 driver so it effectively uses
the provided external clock, if any, or supplies its own clock as a clock
provider.
Reviewed-by: Nuno Sá <nuno.sa@analog.com>
Signed-off-by: Marcelo Schmitt <marcelo.schmitt@analog.com>
Link: https://patch.msgid.link/68697c7613b1a69d752e541caef28d08b3e59bc1.1751895245.git.marcelo.schmitt@analog.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Extend the AD4170-4 driver to allow buffered data capture in continuous
read mode. In continuous read mode, the chip skips the instruction phase
and outputs just ADC sample data, enabling faster sample rates to be
reached. The internal channel sequencer always starts sampling from channel
0 and channel 0 must be enabled if more than one channel is selected for
data capture. The scan mask validation callback checks if the
aforementioned condition is met.
Signed-off-by: Marcelo Schmitt <marcelo.schmitt@analog.com>
Link: https://patch.msgid.link/10ed544d31aa86eb40f93ea947f151d3d9827952.1751895245.git.marcelo.schmitt@analog.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
The AD4170-4 is a multichannel, low noise, 24-bit precision sigma-delta
analog to digital converter. The AD4170-4 design offers a flexible data
acquisition solution with crosspoint multiplexed analog inputs,
configurable ADC voltage reference inputs, ultra-low noise integrated PGA,
digital filtering, wide range of configurable output data rates, internal
oscillator and temperature sensor, four GPIOs, and integrated features for
interfacing with load cell weigh scales, RTD, and thermocouple sensors.
Add basic support for the AD4170-4 ADC with the following features:
- Single-shot read.
- Analog front end PGA configuration.
- Differential and pseudo-differential input configuration.
Signed-off-by: Ana-Maria Cusco <ana-maria.cusco@analog.com>
Co-developed-by: Marcelo Schmitt <marcelo.schmitt@analog.com>
Signed-off-by: Marcelo Schmitt <marcelo.schmitt@analog.com>
Link: https://patch.msgid.link/ce3fd150bd63a2aed6eb6fe59aad6d60c0f9fb67.1751895245.git.marcelo.schmitt@analog.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Move all DMA aligned buffers together at the end of the structure.
1. Timestamp anynomous structure is not used with DMA so it doesn't
belong after __aligned(IIO_DMA_MINALIGN).
2. struct inv_icm42600_fifo contains it's own __aligned(IIO_DMA_MINALIGN)
within it at the end so it should not be after __aligned(IIO_DMA_MINALIGN)
in the outer struct either.
3. Normally 1 would have been considered a bug, but because of the extra
alignment from 2, it actually was OK, but we shouldn't be relying on such
quirks.
Signed-off-by: Jean-Baptiste Maneyrol <jean-baptiste.maneyrol@tdk.com>
Link: https://patch.msgid.link/20250630-losd-3-inv-icm42600-add-wom-support-v6-1-5bb0c84800d9@tdk.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Refactor the sensor interrupt mapping by utilizing regmap_assign_bits(),
which accepts a boolean value directly. Introduce a helper function to
streamline the identification of the configured interrupt line pin. Also,
use identifiers from units.h to represent the full 8-bit register when
setting bits.
This is a purely refactoring change and does not affect functionality.
Signed-off-by: Lothar Rubusch <l.rubusch@gmail.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://patch.msgid.link/20250702230315.19297-2-l.rubusch@gmail.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Introduce AC-coupled activity and inactivity as MAG_ADAPTIVE events.
This adds a new set of threshold and duration configuration options,
ensures proper handling of event disabling, and extends the use of the
link bit to support complementary event configurations.
For example, either ACTIVITY or ACTIVITY_AC can be enabled, but only the
most recently set configuration will remain active. Disabling ACTIVITY
will have no effect if ACTIVITY_AC is currently enabled, as the event
types must match (i.e., ACTIVITY_AC must be explicitly disabled). When
either INACTIVITY or INACTIVITY_AC is enabled alongside an activity
event, the link bit is set.
With the link bit and auto-sleep enabled, activity and inactivity events
represent changes in the sensor's power-saving state and are only
triggered upon actual state transitions. Since AC coupling uses separate
bits for activity and inactivity, each can be configured independently.
For instance, ACTIVITY can be linked with INACTIVITY_AC.
If one of the linked events is disabled, the link bit is cleared. In
that case, the remaining event will no longer reflect a state transition
but will instead trigger based on periodic inactivity or whenever the
activity threshold is exceeded.
Signed-off-by: Lothar Rubusch <l.rubusch@gmail.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://patch.msgid.link/20250702230819.19353-8-l.rubusch@gmail.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Configure the link bit to associate activity and inactivity sensing,
allowing the sensor to reflect its internal power-saving state.
Additionally, enable the auto-sleep bit to transition the sensor into
auto-sleep mode during periods of inactivity, as outlined in the
datasheet.
Reviewed-by: Andy Shevchenko <andy@kernel.org>
Signed-off-by: Lothar Rubusch <l.rubusch@gmail.com>
Link: https://patch.msgid.link/20250702230819.19353-7-l.rubusch@gmail.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Add support for configuring an activity detection threshold. Extend the
interrupt handler to process activity-related interrupts, and provide
functions to set the threshold as well as to enable or disable activity
sensing. Additionally, introduce a virtual channel that represents the
logical AND of the x, y, and z axes in the IIO channel.
This patch serves as a preparatory step; some definitions and functions
introduced here are intended to be extended later to support inactivity
detection.
Signed-off-by: Lothar Rubusch <l.rubusch@gmail.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://patch.msgid.link/20250702230819.19353-5-l.rubusch@gmail.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Cover the following tasks:
- Add scan_mask and scan_index to the IIO channel configuration. The
scan_index sets up buffer usage. According to the datasheet, the ADXL313
uses a 13-bit wide data field in full-resolution mode. Set the
signedness, number of storage bits, and endianness accordingly.
- Parse the devicetree for an optional interrupt line and configure the
interrupt mapping based on its presence. If no interrupt line is
specified, keep the FIFO in bypass mode as currently implemented.
- Set up the interrupt handler. Add register access to detect and
evaluate interrupts. Implement functions to clear status registers and
reset the FIFO.
- Implement FIFO watermark configuration and handling. Allow the
watermark level to be set, evaluate the corresponding interrupt, read
the FIFO contents, and push the data to the IIO channel.
Signed-off-by: Lothar Rubusch <l.rubusch@gmail.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://patch.msgid.link/20250702230819.19353-4-l.rubusch@gmail.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Refactor the control of measurement and standby modes for the sensor.
Instead of directly writing to the register, encapsulate this operation
in a dedicated function that handles enabling and disabling measurement.
This approach will reduce code duplication wherever sensor configuration
changes are required. In subsequent patches, measurement mode will be
set to standby as part of this process.
Additionally, simplify the control mask to include only the measurement
bit. The sleep bit governs a different behavior—putting the sensor into
sleep mode, not just standby for configuration—and is currently unused.
Therefore, there's no need to include both the sleep and measurement
bits in the same mask.
Reviewed-by: Andy Shevchenko <andy@kernel.org>
Signed-off-by: Lothar Rubusch <l.rubusch@gmail.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://patch.msgid.link/20250702230819.19353-3-l.rubusch@gmail.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
MediaTek MT6363 is a PMIC found on MT8196/MT6991 board designs
and communicates with the SoC over SPMI.
This PMIC integrates an Auxiliary ADC (AUXADC) which has a grand
total of 54 ADC channels: 49 PMIC-internal channels, 2 external
NTC thermistor channels and 2 generic ADC channels (mapped to 7
PMIC ADC external inputs).
To use a generic ADC channel it is necessary to enable one of
the PMIC ADC inputs at a time and only then start the reading,
so in this case it is possible to read only one external input
for each generic ADC channel.
Due to the lack of documentation, this implementation supports
using only one generic ADC channel, hence supports reading only
one external input at a time.
Reviewed-by: Nícolas F. R. A. Prado <nfraprado@collabora.com>
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Reviewed-by: Nuno Sá <nuno.sa@analog.com>
Link: https://patch.msgid.link/20250703141146.171431-6-angelogioacchino.delregno@collabora.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Krzysztof Kozlowski
David Lechner
Aleksander Jan Bajkowski
Jonathan Cameron
Marcelo Schmitt
Ana-Maria Cusco
Jean-Baptiste Maneyrol
Lothar Rubusch
AngeloGioacchino Del Regno
Chelsy Ratnawat