Add an SPDX id of LGPL-2.0+ to files in the
sound core sub-system that are missing ids. Remove
boilerplate text.
These files were originally submitted in a big commit
for the ALSA sound system for kernel version 2.5.4,
by Jaroslav Kysela, in Feb 2002.
Signed-off-by: Tim Bird <tim.bird@sony.com>
Link: https://patch.msgid.link/20260212183103.3720788-1-tim.bird@sony.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
The ASUS Zenbook 14 UX3405MA uses an ALC294 codec with CS35L41
amplifiers over SPI. The existing quirk for this model only configured
the amplifiers, leaving the headset microphone on the combo jack
non-functional.
Introduce a new fixup that configures pin 0x19 as headset mic input
and chains to ALC245_FIXUP_CS35L41_SPI_2 to preserve speaker
functionality.
Similar to the fix done for the UM3406HA in commit 018f659753
("ALSA: hda/realtek: Fix headset mic on ASUS Zenbook 14").
Signed-off-by: Erik Sanjaya <sirreidlos@gmail.com>
Link: https://patch.msgid.link/20260217102112.20651-1-sirreidlos@gmail.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Some XRUN-related error messages may repeat themselves, because there
can be multiple pending packets. Modify notify_xrun() function to
return whether it's being stopped or not, and show the error message
only once when the XRUN is actually handled.
Along with it, fix a typo of word package to packet in the error
message.
Link: https://patch.msgid.link/20260216141209.1849200-5-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
At silencing the playback URB packets in the implicit fb mode before
the actual playback, we blindly assume that the received packets fit
with the buffer size. But when the setup in the capture stream
differs from the playback stream (e.g. due to the USB core limitation
of max packet size), such an inconsistency may lead to OOB writes to
the buffer, resulting in a crash.
For addressing it, add a sanity check of the transfer buffer size at
prepare_silent_urb(), and stop the data copy if the received data
overflows. Also, report back the transfer error properly from there,
too.
Note that this doesn't fix the root cause of the playback error
itself, but this merely covers the kernel Oops.
Link: https://bugzilla.kernel.org/show_bug.cgi?id=221076
Link: https://patch.msgid.link/20260216141209.1849200-4-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
We did manual copies over loop for the packet data update of the
implicit feedback, but this can be optimized with a simple memcpy().
Along with it, change the data type of snd_usb_packet_info struct to
align with other (from uint32_t to int).
No functional changes but only code optimizations.
Link: https://patch.msgid.link/20260216141209.1849200-3-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
At receiving the packets from the implicit feedback source, we didn't
update ctx->packets field but only the ctx->packet_size[] data.
In exceptional cases, this might lead to unexpectedly superfluous data
transfer (although this won't happen usually due to the nature of USB
isochronous transfer). Fix it to update the field properly.
Link: https://patch.msgid.link/20260216141209.1849200-2-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Setting up the interface when suspended/resumeing fail on this card.
Adding a reset and delay quirk will eliminate this problem.
usb 1-1: New USB device found, idVendor=0020, idProduct=0b21
usb 1-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 1-1: Product: GHW-123P
usb 1-1: Manufacturer: Generic
usb 1-1: SerialNumber: 20210726905926
Signed-off-by: Lianqin Hu <hulianqin@vivo.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Link: https://patch.msgid.link/TYUPR06MB62176831E47899AB98902012D260A@TYUPR06MB6217.apcprd06.prod.outlook.com
ASoC: Updates for v7.0
This release is almost all abut driers, there's very little core work
here, although some of that driver work is in more generic areas like
SDCA and SOF:
- Generic SDCA support for reporting jack events.
- Continuing platform support, cleanup and feature improements for the
AMD, Intel, Qualcomm and SOF code.
- Platform description improvements for the Cirrus drivers.
- Support for NXP i.MX952, Realtek RT1320 and RT5575, and Sophogo
CV1800B.
We also pulled in one small SPI API update and some more substantial
regmap work (cache description improvements) for use in drivers.
ALSA OSS mixer layer calls the kcontrol ops rather individually, and
pending calls might be not always caught at disconnecting the device.
For avoiding the potential UAF scenarios, add sanity checks of the
card disconnection at each entry point of OSS mixer accesses. The
rwsem is taken just before that check, hence the rest context should
be covered by that properly.
Link: https://patch.msgid.link/20260209121212.171430-1-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
The _hda_dsp_stream_put() function now depends on the
snd_hdac_ext_stream_release() interface from SND_HDA_EXT_CORE:
x86_64-linux-ld: vmlinux.o: in function `_hda_dsp_stream_put':
hda-stream.c:(.text+0xfac605): undefined reference to `snd_hdac_ext_stream_release'
Select this symbol the same way the other users do.
Fixes: 89e1d632bb ("ASoC: SOF: Intel: add hda_dsp_stream_pair_get/put helpers")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Link: https://patch.msgid.link/20260209070901.857700-1-arnd@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Setting up the interface when suspended/resumeing fail on this card.
Adding a reset and delay quirk will eliminate this problem.
usb 1-1: New USB device found, idVendor=001f, idProduct=0b21
usb 1-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 1-1: Product: AB13X USB Audio
usb 1-1: Manufacturer: Generic
usb 1-1: SerialNumber: 20210926172016
Signed-off-by: Lianqin Hu <hulianqin@vivo.com>
Link: https://patch.msgid.link/TYUPR06MB6217522D0DB6E2C9DF46B56ED265A@TYUPR06MB6217.apcprd06.prod.outlook.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Add quirk for the Onkyo SE-300PCIE variant with PCI subsystem ID
(160b:0102). This variant (OK0011) was found in the official Windows
driver packages.
Also, reorder entries and fix the indentation to maintain
consistency.
Signed-off-by: Harin Lee <me@harin.net>
Link: https://patch.msgid.link/20260208133001.680550-1-me@harin.net
Signed-off-by: Takashi Iwai <tiwai@suse.de>
The mute and mic-mute LEDs on HP ENVY x360 Convertible 15-es0xxx
(PCI SSID 103c:88b3) do not work with the current driver.
This model requires a combination of COEFBIT and GPIO fixups to
correctly control the LEDs. Introduce a new fixup function
alc245_fixup_hp_envy_x360_mute_led and add a quirk to apply it.
Signed-off-by: Illia Barbashyn <04baril@gmail.com>
Link: https://patch.msgid.link/20260207221955.24132-1-04baril@gmail.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
The dma-coherent property is used to indicate a device is capable of
coherent DMA operations. On i.MX952, one of EDMA devices support such
feature, in order to support the EDMA device, the memory needs to be
allocated from the DMA device.
Make this driver to support both non dma-coherent and dma-coherent dma
engine.
Remove dma coerce_mask_and coherent() because DMA provider already set it
according to its capability.
Signed-off-by: Shengjiu Wang <shengjiu.wang@nxp.com>
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Link: https://patch.msgid.link/20260206014805.3897764-5-shengjiu.wang@nxp.com
Signed-off-by: Mark Brown <broonie@kernel.org>
There is a limitation on i.MX952 that dma request is not cleared at the
end of conversion with dma slave mode. Which causes sample is dropped
from the input fifo on the second time if dma is triggered before the
client device and EDMA may copy wrong data from output fifo as the output
fifo is not ready in the beginning.
The solution is to trigger asrc before dma on i.MX952, and add delay to
wait output data is generated then start the EDMA for output, otherwise
the m2m function has noise issues.
So add an option to start ASRC first for M2M before ASRC is enabled on
i.MX952.
Signed-off-by: Shengjiu Wang <shengjiu.wang@nxp.com>
Reviewed-by: Daniel Baluta <daniel.baluta@nxp.com>
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Link: https://patch.msgid.link/20260206014805.3897764-3-shengjiu.wang@nxp.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Add new compatible string 'fsl,imx952-asrc' for i.MX952 platform,
below are the differences that make this ASRC not fallback compatible
with other platforms.
1) There is a power domain on i.MX952 for the wakeupmix system where
ASRC is in. But it is enabled by default, ASRC device don't need
to enable it, so it is optional for i.MX952.
2) The clock sources of ASRC are different on i.MX952.
3) There is a limitation on i.MX952 that DMA request is not cleared at the
end of conversion with dma slave mode. Which causes sample is dropped from
the input fifo on the second time if DMA is triggered before the client
device and DMA may copy wrong data from output fifo as the output fifo is
not ready in the beginning. So there is specially handling in the driver.
Signed-off-by: Shengjiu Wang <shengjiu.wang@nxp.com>
Reviewed-by: Daniel Baluta <daniel.baluta@nxp.com>
Link: https://patch.msgid.link/20260206014805.3897764-2-shengjiu.wang@nxp.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Merge series from Sebastian Reichel <sebastian.reichel@collabora.com>:
I'm currently working on DisplayPort audio support for the Rockchip
RK3588/RK3576 SoCs, which preferrably use S/PDIF as DAI source.
Apparently the upstream Rockchip S/PDIF driver is lacking a couple of
features right now, which are necessary to get things going (i.e.
setting the sysclk from the machine driver). I found the missing bits
in Rockchip's 6.1 BSP kernel and ported them over. This series effectly
brings the mainline kernel on-par with the BSP driver, but also contains
a couple of cleanup patches of my own to bring the driver to the modern
age.
Merge series from Richard Fitzgerald <rf@opensource.cirrus.com>:
Some new Dell models use spare pins on the amp as a binary integer
value to indicate the speaker type. The driver must use this to
select the correct firmware files for the hardware.
Patch #1 is the new support.
The other patches are for KUnit testing.
imx_rpmsg_probe() calls snd_soc_find_dai() without holding client_mutex.
However, snd_soc_find_dai() has lockdep_assert_held(&client_mutex)
indicating callers must hold this lock, as the function iterates over the
global component list.
All other callers of snd_soc_find_dai() either hold client_mutex via the
snd_soc_bind_card() path or use the snd_soc_find_dai_with_mutex() wrapper.
Use snd_soc_find_dai_with_mutex() instead to fix the missing lock
protection.
Signed-off-by: Ziyi Guo <n7l8m4@u.northwestern.edu>
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Link: https://patch.msgid.link/20260205052429.4046903-1-n7l8m4@u.northwestern.edu
Signed-off-by: Mark Brown <broonie@kernel.org>
Add KUnit test cases for:
- cs35l56_process_xu_properties() which reads the onchip GPIO definitions.
- cs35l56_set_fw_name() calls functions to configure and set the GPIOs.
- cs35l56_set_fw_name() saves the ID value in cs35l56_priv.speaker_id.
- cs35l56_set_fw_name() does not overwrite a speaker ID that was already
found some other way.
Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Link: https://patch.msgid.link/20260205164838.1611295-4-rf@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Add KUnit testing of:
cs35l56_check_and_save_onchip_spkid_gpios()
cs35l56_configure_onchip_spkid_pads()
cs35l56_read_onchip_spkid()
The test consists of:
- A mock regmap that simulates the pad and pin config registers.
- Parameterization of the pin list, pulls list, a simulated value for
each pin and the speaker ID value that this should produce.
- A self-test of the simulated pin and GPIO registers.
- A test that the value returned by cs35l56_read_onchip_spkid() is
correct.
- A test that the pin pull-up/down are set correctly by
cs35l56_configure_onchip_spkid_pads()
- A test that cs35l56_configure_onchip_spkid_pads() and
cs35l56_read_onchip_spkid(0 return the expected values if
cs35l56_base->num_onchip_spkid_gpios == 0.
- A test that cs35l56_check_and_save_onchip_spkid_gpios() saves
the configuration.
- A test that cs35l56_check_and_save_onchip_spkid_gpios() rejects
illegal GPIO numbers.
- A test that cs35l56_check_and_save_onchip_spkid_gpios() rejects
illegal pull types.
Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Link: https://patch.msgid.link/20260205164838.1611295-3-rf@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Add support for using the state of pins on the amplifier to indicate
the type of speaker fitted.
Previously, where there were alternate speaker vendors, this was
indicated using host CPU GPIOs.
Some new Dell models use spare pins on the CS35L63 as GPIOs for the
speaker ID detection.
Cirrus-specific SDCA Disco properties provide a list of the pins to be
used, and pull-up/down settings for the pads. This list is ordered,
MSbit to LSbit.
The code to set the firmware filename has been modified to check for
using chip pins for speaker ID. The entire block of code to set
firmware name has been moved out of cs35l56_component_probe() into
its own function to make it easier to KUnit test.
Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Link: https://patch.msgid.link/20260205164838.1611295-2-rf@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Merge series from Peter Ujfalusi <peter.ujfalusi@linux.intel.com>:
The series adds support for echo reference functionality by allowing
the capturing of playback audio right before it leaves the DSP.
For this to work correctly we need a virtual DAI that is also connected
to the echo reference capture device and in absence of playback a
signal generator generates silence to allow the capture to run.
When the real playback starts, application will start to receive the
playback audio to be usable for echo reference.
Merge series from Sen Wang <sen@ti.com>:
This series adds asynchronous mode support to the McASP driver, which
enables independent configuration of bitclocks, frame sync, and audio
configurations between tx(playback) and rx(record). And achieves
simultaneous playback & record using different audio configurations.
It also adds two clean up patches to the McASP driver that disambiguate
and simplifies the logic which avoids the async enhancement from being
too convoluted to review and analyze.
The implementation is based on vendor documentation and patches tested in
both SK-AM62P-LP (sync mode, McASP slave) and AM62D-EVM
(async mode, McASP master, rx & tx has different TDM configs).
Testing verifies async mode functionality while maintaining backward
compatibility with the default sync mode.
Bootlog and Async mode tests on AM62D-EVM: [0]
[0]: https://gist.github.com/SenWang125/f31f9172b186d414695e37c8b9ef127d
Tim Bird
Erik Sanjaya
Takashi Iwai
胡连勤
Baojun Xu
Lewis Mason
Eric Naim
Qihang Guo
Peter Ujfalusi
Arnd Bergmann
Vijendar Mukunda
Harin Lee
Pedro Amarante
Illia Barbashyn
Shengjiu Wang
Dan Carpenter
Mark Brown
Sebastian Reichel
Sugar Zhang
Ziyi Guo
Richard Fitzgerald
Breno Baptista
Harshit Mogalapalli