commit e174929793 upstream.
When iov_iter_get_pages2() fails in rds_message_zcopy_from_user(),
the pinned pages are released with put_page(), and
rm->data.op_mmp_znotifier is cleared. But we fail to properly
clear rm->data.op_nents.
Later when rds_message_purge() is called from rds_sendmsg() the
cleanup loop iterates over the incorrectly non zero number of
op_nents and frees them again.
Fix this by properly resetting op_nents when it should be in
rds_message_zcopy_from_user().
Fixes: 0cebaccef3 ("rds: zerocopy Tx support.")
Signed-off-by: Allison Henderson <achender@kernel.org>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20260505234336.2132721-1-achender@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
io_wq_remove_pending() needs to fix up wq->hash_tail[] if the cancelled
work was the tail of its hash bucket. When doing this, it checks whether
the preceding entry in acct->work_list has the same hash value, but
never checks that the predecessor is hashed at all. io_get_work_hash()
is simply atomic_read(&work->flags) >> IO_WQ_HASH_SHIFT, and the hash
bits are never set for non-hashed work, so it returns 0. Thus, when a
hashed bucket-0 work is cancelled while a non-hashed work is its list
predecessor, the check spuriously passes and a pointer to the non-hashed
io_kiocb is stored in wq->hash_tail[0].
Because non-hashed work is dequeued via the fast path in
io_get_next_work(), which never touches hash_tail[], the stale pointer
is never cleared. Therefore, after the non-hashed io_kiocb completes and
is freed back to req_cachep, wq->hash_tail[0] is a dangling pointer. The
io_wq is per-task (tctx->io_wq) and survives ring open/close, so the
dangling pointer persists for the lifetime of the task; the next hashed
bucket-0 enqueue dereferences it in io_wq_insert_work() and
wq_list_add_after() writes through freed memory.
Add the missing io_wq_is_hashed() check so a non-hashed predecessor
never inherits a hash_tail[] slot.
Cc: stable@vger.kernel.org # 5.7+
Fixes: 204361a77f ("io-wq: fix hang after cancelling pending hashed work")
Signed-off-by: Nicholas Carlini <nicholas@carlini.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 657a091ab6 upstream.
The LVDS init code looks up an I2C adapter using i2c_get_adapter() and
tries to read the EDID before falling back to allocating and registering
its own adapter.
The error handling does not separate these cases so on a late init
failure it will try to deregister and free also an adapter that had
previously been registered. Since i2c_get_adapter() takes another
reference to the adapter, deregistration hangs indefinitely while
waiting for the reference to be released.
Fix this by only destroying adapters allocated during LVDS init on
errors.
Fixes: a57ebfc0b4 ("drm/gma500: Make oaktrail lvds use ddc adapter from drm_connector")
Cc: stable@vger.kernel.org # 6.0
Cc: Patrik Jakobsson <patrik.r.jakobsson@gmail.com>
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Patrik Jakobsson <patrik.r.jakobsson@gmail.com>
Link: https://patch.msgid.link/20260508144446.59722-3-johan@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 4cfe4c0efb upstream.
After a GPU reset the HWSP is zeroed, so previously completed
requests appear incomplete. If such a request is picked up during
reset_rewind() and marked guilty, i915_request_set_error_once()
returns early (fence already signaled), leaving fence.error without
a fatal error code. The subsequent __i915_request_skip() then hits:
```
GEM_BUG_ON(!fatal_error(rq->fence.error))
```
Fixes a kernel BUG observed on Sandy Bridge (Gen6) during
heartbeat-triggered engine resets.
```
kernel BUG at drivers/gpu/drm/i915/i915_request.c:556!
RIP: __i915_request_skip+0x15e/0x1d0 [i915]
...
__i915_request_reset+0x212/0xa70 [i915]
reset_rewind+0xe4/0x280 [i915]
intel_gt_reset+0x30d/0x5b0 [i915]
heartbeat+0x516/0x530 [i915]
```
Guard __i915_request_skip() with i915_request_signaled(), if the
fence is already signaled, the ring content is committed and there
is nothing left to skip.
Fixes: 36e191f064 ("drm/i915: Apply i915_request_skip() on submission")
Closes: https://gitlab.freedesktop.org/drm/i915/kernel/-/work_items/13729
Signed-off-by: Sebastian Brzezinka <sebastian.brzezinka@intel.com>
Cc: stable@vger.kernel.org # v5.7+
Reviewed-by: Krzysztof Karas <krzysztof.karas@intel.com>
Reviewed-by: Andi Shyti <andi.shyti@linux.intel.com>
Signed-off-by: Andi Shyti <andi.shyti@linux.intel.com>
Link: https://lore.kernel.org/r/fe76921d35b6ae85aa651822726d0d9815aa5362.1776339012.git.sebastian.brzezinka@intel.com
(cherry picked from commit 5ba54393dc)
Signed-off-by: Tvrtko Ursulin <tursulin@ursulin.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit d289478cfc upstream.
A message of type CEPH_MSG_OSD_MAP contains an OSD map that itself
contains a CRUSH map. The received CRUSH map may optionally contain
choose_args that get decoded in decode_choose_args(). In this function,
num_choose_arg_maps is read from the message, and a corresponding number
of crush_choose_arg_maps gets decoded afterwards. Each
crush_choose_arg_map has a choose_args_index, which serves as the key
when inserting it into the choose_args rbtree of the decoded crush_map.
If a (potentially corrupted) message contains two crush_choose_arg_maps
with the same index, the assertion in insert_choose_arg_map() triggers a
kernel BUG when trying to insert the second crush_choose_arg_map.
This patch fixes the issue by switching to the non-asserting rbtree
insertion function and rejecting the message if the insertion fails.
[ idryomov: changelog ]
Cc: stable@vger.kernel.org
Signed-off-by: Raphael Zimmer <raphael.zimmer@tu-ilmenau.de>
Reviewed-by: Ilya Dryomov <idryomov@gmail.com>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 4c79fc2d59 upstream.
A message of type CEPH_MSG_OSD_MAP containing a crush map with at least
one bucket has two fields holding the bucket algorithm. If the values
in these two fields differ, an out-of-bounds access can occur. This is
the case because the first algorithm field (alg) is used to allocate
the correct amount of memory for a bucket of this type, while the second
algorithm field inside the bucket (b->alg) is used in the subsequent
processing.
This patch fixes the issue by adding a check that compares alg and
b->alg and aborts the processing in case they differ. Furthermore,
b->alg is set to 0 in this case, because the destruction of the crush
map also uses this field to determine the bucket type, which can again
result in an out-of-bounds access when trying to free the memory pointed
to by the fields of the bucket. To correctly free the memory allocated
for the bucket in such a case, the corresponding call to kfree is moved
from the algorithm-specific crush_destroy_bucket functions to the
generic crush_destroy_bucket().
Cc: stable@vger.kernel.org
Signed-off-by: Raphael Zimmer <raphael.zimmer@tu-ilmenau.de>
Reviewed-by: Ilya Dryomov <idryomov@gmail.com>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 28b0a2ab8c upstream.
A message of type CEPH_MSG_OSD_MAP contains an OSD map that itself
contains a CRUSH map. When decoding this CRUSH map in crush_decode(), an
array of max_buckets CRUSH buckets is decoded, where some indices may
not refer to actual buckets and are therefore set to NULL. The received
CRUSH map may optionally contain choose_args that get decoded in
decode_choose_args(). When decoding a crush_choose_arg_map, a series of
choose_args for different buckets is decoded, with the bucket_index
being read from the incoming message. It is only checked that the bucket
index does not exceed max_buckets, but not that it doesn't point to an
index with a NULL bucket. If a (potentially corrupted) message contains
a crush_choose_arg_map including such a bucket_index, a null pointer
dereference may occur in the subsequent processing when attempting to
access the bucket with the given index.
This patch fixes the issue by extending the affected check. Now, it is
only attempted to access the bucket if it is not NULL.
Cc: stable@vger.kernel.org
Signed-off-by: Raphael Zimmer <raphael.zimmer@tu-ilmenau.de>
Reviewed-by: Ilya Dryomov <idryomov@gmail.com>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 35d0ed82d0 upstream.
When decoding osd_state and osd_weight from an incoming osdmap in
osdmap_decode(), both are decoded for each osd, i.e., map->max_osd
times. The ceph_decode_need() check only accounts for
sizeof(*map->osd_weight) once. This can potentially result in an
out-of-bounds memory access if the incoming message is corrupted such
that the max_osd value exceeds the actual content of the osdmap message.
This patch fixes the issue by changing the corresponding part in the
ceph_decode_need() check to account for
map->max_osd*sizeof(*map->osd_weight).
Cc: stable@vger.kernel.org
Fixes: dcbc919a5d ("libceph: switch osdmap decoding to use ceph_decode_entity_addr")
Signed-off-by: Raphael Zimmer <raphael.zimmer@tu-ilmenau.de>
Reviewed-by: Ilya Dryomov <idryomov@gmail.com>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 5d3cc36b4e upstream.
The old_blob in __ceph_setxattr() can store
ci->i_xattrs.prealloc_blob value during the retry.
However, it is never called the ceph_buffer_put()
for the old_blob object. This patch fixes the issue of
the buffer leak.
Cc: stable@vger.kernel.org
Signed-off-by: Viacheslav Dubeyko <Slava.Dubeyko@ibm.com>
Reviewed-by: Alex Markuze <amarkuze@redhat.com>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit d6854daa67 upstream.
snd_usbmidi_get_ms_info() validates the internal MIDIStreaming endpoint
descriptor size before using baAssocJackID[], but the descriptor walker can
still return a class-specific endpoint descriptor whose bLength exceeds the
remaining bytes in the endpoint-extra scan.
That leaves later flexible-array reads bounded by bLength, but not by the
remaining bytes in the endpoint-extra scan.
Stop walking when bLength is zero or
extends past the remaining endpoint-extra scan.
Fixes: 5c6cd7021a ("ALSA: usb-audio: Fix case when USB MIDI interface has more than one extra endpoint descriptor")
Cc: stable@vger.kernel.org
Signed-off-by: Cássio Gabriel <cassiogabrielcontato@gmail.com>
Link: https://patch.msgid.link/20260507-usb-midi-endpoint-scan-bounds-v1-1-329d7348160e@gmail.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 7d9a7f1f96 upstream.
On 32-bit architectures, the infinite loop is as follows:
len = p->ErrorDataLength == 0xfffffff8
u8 *next = p->ErrorContextData + len
next == p
On 32-bit architectures, the out-of-bounds read is as follows:
len = p->ErrorDataLength == 0xfffffff0
u8 *next = p->ErrorContextData + len
next == (u8 *)p - 8
Reported-by: ChenXiaoSong <chenxiaosong@kylinos.cn>
Fixes: 76894f3e2f ("cifs: improve symlink handling for smb2+")
Cc: stable@vger.kernel.org
Signed-off-by: Ye Bin <yebin10@huawei.com>
Reviewed-by: ChenXiaoSong <chenxiaosong@kylinos.cn>
Signed-off-by: Steve French <stfrench@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 16d990a154 upstream.
kvm_s390_pci_aif_enable(), kvm_s390_pci_aif_disable(), and
aen_host_forward() index the GAIT by manually multiplying the index
with sizeof(struct zpci_gaite).
Since aift->gait is already a struct zpci_gaite pointer, this
double-scales the offset, accessing element aisb*16 instead of aisb.
This causes out-of-bounds accesses when aisb >= 32 (with
ZPCI_NR_DEVICES=512)
Fix by removing the erroneous sizeof multiplication.
Fixes: 3c5a1b6f0a ("KVM: s390: pci: provide routines for enabling/disabling interrupt forwarding")
Fixes: 73f91b0043 ("KVM: s390: pci: enable host forwarding of Adapter Event Notifications")
Reported-by: Yuhao Jiang <danisjiang@gmail.com>
Cc: stable@vger.kernel.org
Signed-off-by: Junrui Luo <moonafterrain@outlook.com>
Reviewed-by: Christian Borntraeger <borntraeger@linux.ibm.com>
Reviewed-by: Matthew Rosato <mjrosato@linux.ibm.com>
Tested-by: Matthew Rosato <mjrosato@linux.ibm.com>
Signed-off-by: Christian Borntraeger <borntraeger@linux.ibm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 577a8d3bae upstream.
kvm_reset_dirty_gfn() guards the gfn range with
if (!memslot || (offset + __fls(mask)) >= memslot->npages)
return;
but offset is u64 and the addition is unchecked. The check can be
silently bypassed by a u64 wrap.
The dirty ring backing those entries is MAP_SHARED at
KVM_DIRTY_LOG_PAGE_OFFSET of the vcpu fd, so the VMM can rewrite the
slot and offset fields of any entry between when the kernel pushes
them and when KVM_RESET_DIRTY_RINGS consumes them. On reset,
kvm_dirty_ring_reset() re-reads the values via READ_ONCE() and feeds
them straight back into this check; only the flags handshake is
treated as the handover, the slot/offset payload is taken on trust.
Crafting two entries
entry[i].offset = 0xffffffffffffffc1
entry[i+1].offset = 0
makes the coalescing loop in kvm_dirty_ring_reset() compute
delta = (s64)(0 - 0xffffffffffffffc1) = 63
which falls in [0, BITS_PER_LONG), so it folds entry[i+1] into the
existing mask by setting bit 63. The trailing kvm_reset_dirty_gfn()
call then sees offset = 0xffffffffffffffc1 and __fls(mask) = 63;
the sum is 0 in u64 and the bounds check passes.
That offset propagates into kvm_arch_mmu_enable_log_dirty_pt_masked()
unchanged. On the legacy MMU path -- kvm_memslots_have_rmaps() ==
true, i.e. shadow paging, any VM that has allocated shadow roots, or
a write-tracked slot -- it reaches gfn_to_rmap(), which indexes
slot->arch.rmap[0][] with a near-U64_MAX gfn. That is an
out-of-bounds load of a kvm_rmap_head, followed by a conditional
clear of PT_WRITABLE_MASK in whatever the loaded pointer points at.
The path is reachable from any process holding /dev/kvm.
Range-check offset on its own first, so the addition cannot wrap.
memslot->npages is bounded well below U64_MAX, so once offset <
npages holds, offset + __fls(mask) (with __fls(mask) < BITS_PER_LONG)
stays in range.
Fixes: fb04a1eddb ("KVM: X86: Implement ring-based dirty memory tracking")
Cc: stable@vger.kernel.org
Signed-off-by: Aaron Sacks <contact@xchglabs.com>
Link: https://patch.msgid.link/20260512060742.1628959-1-contact@xchglabs.com/
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit f9e1c1324b upstream.
AUDIT_ADD_RULE and AUDIT_DEL_RULE correctly check for AUDIT_LOCKED
and return -EPERM, but AUDIT_TRIM and AUDIT_MAKE_EQUIV do not. This
allows a process with CAP_AUDIT_CONTROL to modify directory tree
watches and equivalence mappings even when the audit configuration
has been locked, undermining the purpose of the lock.
Add AUDIT_LOCKED checks to both commands.
Cc: stable@vger.kernel.org
Reviewed-by: Ricardo Robaina <rrobaina@redhat.com>
Assisted-by: Claude:claude-opus-4-6
Signed-off-by: Sergio Correia <scorreia@redhat.com>
Signed-off-by: Paul Moore <paul@paul-moore.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 2c308cf342 upstream.
The shutdown handler aq_pci_shutdown() unconditionally calls
pci_wake_from_d3(pdev, false), clearing the PCI PME_En bit even when
wake-on-LAN has been configured. While aq_nic_shutdown() correctly
programs the NIC firmware via aq_nic_set_power() to listen for magic
packets, the PCI subsystem will not propagate the resulting PME wake
event from D3, so the system never wakes after poweroff.
WOL from suspend (S3) is unaffected because aq_suspend_common() does
not touch pci_wake_from_d3() and relies on the PM core's wake
configuration via device_may_wakeup().
This affects all atlantic-supported NICs (AQC107/108/111/112/113);
users have reported that WOL works if the atlantic driver is never
loaded, but breaks once it has run its shutdown path.
Pass the configured WOL state to pci_wake_from_d3() instead of a
literal false, so the PCI PME_En bit is preserved when the user has
armed WOL via ethtool.
Fixes: 90869ddfef ("net: aquantia: Implement pci shutdown callback")
Cc: stable@vger.kernel.org
Signed-off-by: Zoran Ilievski <goodboy@rexbytes.com>
Reviewed-by: Sukhdeep Singh <sukhdeeps@marvell.com>
Link: https://patch.msgid.link/20260511064002.1857-1-goodboy@rexbytes.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 19f94b6fee upstream.
nft_ct_expect_obj_eval() allocates an expectation and may call
nf_ct_expect_related(), but never drops its local reference.
Add nf_ct_expect_put(exp) before return to balance allocation.
Fixes: 857b46027d ("netfilter: nft_ct: add ct expectations support")
Cc: stable@vger.kernel.org
Signed-off-by: Li Xiasong <lixiasong1@huawei.com>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit e4a640475e upstream.
__audit_log_capset() records the effective capability set into the
inheritable field due to a copy-paste error. Every CAPSET audit
record therefore reports cap_pi (process inheritable) with the value
of cap_effective instead of cap_inheritable.
This silently corrupts audit data used for compliance and forensic
analysis: an attacker who modifies inheritable capabilities to
prepare for a privilege-escalating exec would have the change masked
in the audit trail.
The bug has been present since the original introduction of CAPSET
audit records in 2008.
Cc: stable@vger.kernel.org
Fixes: e68b75a027 ("When the capset syscall is used it is not possible for audit to record the actual capbilities being added/removed. This patch adds a new record type which emits the target pid and the eff, inh, and perm cap sets.")
Reviewed-by: Ricardo Robaina <rrobaina@redhat.com>
Assisted-by: Claude:claude-opus-4-6
Signed-off-by: Sergio Correia <scorreia@redhat.com>
Signed-off-by: Paul Moore <paul@paul-moore.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit eb6317739b upstream.
process_register_request() allocates an expectation and then checks
whether a conntrack helper is available. If helper lookup fails, the
function returns early and the allocated expectation is left behind.
Reorder the code to fetch and validate helper before calling
nf_ct_expect_alloc(). This keeps the logic simpler and removes the leak
path while preserving existing behavior.
Fixes: e14575fa75 ("netfilter: nf_conntrack: use rcu accessors where needed")
Cc: stable@vger.kernel.org
Signed-off-by: Li Xiasong <lixiasong1@huawei.com>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 067bf016e9 ]
Liang reported an issue where setting a slave’s actor_port_prio to
predefined values such as 0, 255, or 65535 would cause a system crash.
The problem occurs because in bond_opt_parse(), when the provided value
matches a predefined table entry, the function returns that table entry,
which does not contain slave information. Later, in
bond_option_actor_port_prio_set(), calling bond_slave_get_rtnl() leads
to a NULL pointer dereference.
Since actor_port_prio is defined as a u16 and initialized to the default
value of 255 in ad_initialize_port(), there is no need for the
bond_actor_port_prio_tbl. Using the BOND_OPTFLAG_RAWVAL flag is sufficient.
Fixes: 6b6dc81ee7 ("bonding: add support for per-port LACP actor priority")
Reported-by: Liang Li <liali@redhat.com>
Signed-off-by: Hangbin Liu <liuhangbin@gmail.com>
Link: https://patch.msgid.link/20251105072620.164841-1-liuhangbin@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 7079c8c13f ]
trim_newline() unconditionally dereferences s[len - 1] after computing
len = strnlen(s, maxlen). When the string is empty, len is 0 and the
expression underflows to s[(size_t)-1], reading (and potentially
writing) one byte before the buffer.
The two callers feed trim_newline() with the result of strscpy() from
configfs store callbacks (dev_name_store, userdatum_value_store).
configfs guarantees count >= 1 reaches the callback, but the byte
itself can be NUL: a userspace write(fd, "\0", 1) leaves the
destination empty after strscpy() and triggers the underflow. The OOB
write only fires if the adjacent byte happens to be '\n', so this is
not a security issue, but the access is undefined behaviour either way.
This pattern is commonly flagged by LLM-based code reviewers. While it
is not a security fix, the underlying access is undefined behaviour and
the change is small and self-contained, so it is a reasonable candidate
for the stable trees.
Guard the dereference on a non-zero length.
Fixes: ae001dc679 ("net: netconsole: move newline trimming to function")
Cc: stable@vger.kernel.org
Signed-off-by: Breno Leitao <leitao@debian.org>
Reviewed-by: Gustavo Luiz Duarte <gustavold@gmail.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20260420-netcons_trim_newline-v1-1-dc35889aeedf@debian.org
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 5337213381 ]
snd_fasync_helper() updates fasync->on under snd_fasync_lock, and
snd_fasync_work_fn() now also evaluates fasync->on under the same
lock. snd_kill_fasync() still tests the flag before taking the lock,
leaving an unsynchronized read against FASYNC enable/disable updates.
Move the enabled-state check into the locked section.
Also clear fasync->on under snd_fasync_lock in snd_fasync_free()
before unlinking the pending entry. Together with the locked sender-side
check, this publishes teardown before flushing the deferred work and
prevents a racing sender from requeueing the entry after free has
started.
Fixes: ef34a0ae7a ("ALSA: core: Add async signal helpers")
Fixes: 8146cd333d ("ALSA: core: Fix potential data race at fasync handling")
Cc: stable@vger.kernel.org
Signed-off-by: Cássio Gabriel <cassiogabrielcontato@gmail.com>
Link: https://patch.msgid.link/20260506-alsa-core-fasync-on-lock-v1-1-ea48c77d6ca4@gmail.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit c73370c677 ]
The trace event btrfs_sync_file() is called in an atomic context (all trace
events are) and its call to dput(), which is needed due to the call to
dget_parent(), can sleep, triggering a kernel splat.
This can be reproduced by enabling the trace event and running btrfs/056
from fstests for example. The splat shown in dmesg is the following:
[53.919] BUG: sleeping function called from invalid context at fs/dcache.c:970
[53.947] in_atomic(): 1, irqs_disabled(): 0, non_block: 0, pid: 32773, name: xfs_io
[53.988] preempt_count: 2, expected: 0
[53.967] RCU nest depth: 0, expected: 0
[53.943] Preemption disabled at:
[53.944] [<0000000000000000>] 0x0
[54.078] CPU: 0 UID: 0 PID: 32773 Comm: xfs_io Tainted: G W 7.1.0-rc1-btrfs-next-232+ #1 PREEMPT(full)
[54.070] Tainted: [W]=WARN
[54.071] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.16.2-0-gea1b7a073390-prebuilt.qemu.org 04/01/2014
[54.072] Call Trace:
[54.074] <TASK>
[54.076] dump_stack_lvl+0x56/0x80
[54.079] __might_resched.cold+0xd6/0x10f
[54.072] dput.part.0+0x24/0x110
[54.078] trace_event_raw_event_btrfs_sync_file+0x75/0x140 [btrfs]
[54.089] btrfs_sync_file+0x1ed/0x530 [btrfs]
[54.087] ? __handle_mm_fault+0x8ae/0xed0
[54.089] btrfs_do_write_iter+0x172/0x210 [btrfs]
[54.091] vfs_write+0x21f/0x450
[54.094] __x64_sys_pwrite64+0x8d/0xc0
[54.096] ? do_user_addr_fault+0x20c/0x670
[54.099] do_syscall_64+0x60/0xf20
[54.092] ? clear_bhb_loop+0x60/0xb0
[54.094] entry_SYSCALL_64_after_hwframe+0x76/0x7e
So stop using dget_parent() and dput() and access the parent dentry
directly as dentry->d_parent. This is also what ext4 is doing in
its equivalent trace event ext4_sync_file_enter().
Fixes: a85b46db14 ("btrfs: tracepoints: get correct superblock from dentry in event btrfs_sync_file()")
Reviewed-by: Boris Burkov <boris@bur.io>
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 3df690bba2 ]
When a CREATE returns STATUS_STOPPED_ON_SYMLINK, smb2_check_message()
returns success without any length validation, leaving the symlink
parsers as the only defense against an untrusted server.
symlink_data() walks SMB 3.1.1 error contexts with the loop test "p <
end", but reads p->ErrorId at offset 4 and p->ErrorDataLength at offset
0. When the server-controlled ErrorDataLength advances p to within 1-7
bytes of end, the next iteration will read past it. When the matching
context is found, sym->SymLinkErrorTag is read at offset 4 from
p->ErrorContextData with no check that the symlink header itself fits.
smb2_parse_symlink_response() then bounds-checks the substitute name
using SMB2_SYMLINK_STRUCT_SIZE as the offset of PathBuffer from
iov_base. That value is computed as sizeof(smb2_err_rsp) +
sizeof(smb2_symlink_err_rsp), which is correct only when
ErrorContextCount == 0.
With at least one error context the symlink data sits 8 bytes deeper,
and each skipped non-matching context shifts it further by 8 +
ALIGN(ErrorDataLength, 8). The check is too short, allowing the
substitute name read to run past iov_len. The out-of-bound heap bytes
are UTF-16-decoded into the symlink target and returned to userspace via
readlink(2).
Fix this all up by making the loops test require the full context header
to fit, rejecting sym if its header runs past end, and bound the
substitute name against the actual position of sym->PathBuffer rather
than a fixed offset.
Because sub_offs and sub_len are 16bits, the pointer math will not
overflow here with the new greater-than.
Cc: Ronnie Sahlberg <ronniesahlberg@gmail.com>
Cc: Shyam Prasad N <sprasad@microsoft.com>
Cc: Tom Talpey <tom@talpey.com>
Cc: Bharath SM <bharathsm@microsoft.com>
Cc: linux-cifs@vger.kernel.org
Cc: samba-technical@lists.samba.org
Cc: stable <stable@kernel.org>
Reviewed-by: Paulo Alcantara (Red Hat) <pc@manguebit.org>
Assisted-by: gregkh_clanker_t1000
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
Signed-off-by: Alva Lan <alvalan9@foxmail.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 215b7f9ecb ]
The `smb2_symlink_err_rsp` structure was previously defined with
`ErrorContextData` as a single `__u8` byte. However, the `ErrorContextData`
field is intended to be a variable-length array based on `ErrorDataLength`.
This mismatch leads to incorrect pointer arithmetic and potential memory
access issues when processing error contexts.
Updates the `ErrorContextData` field to be a flexible array
(`__u8 ErrorContextData[]`). Additionally, it modifies the corresponding
casts in the `symlink_data()` function to properly handle the flexible
array, ensuring correct memory calculations and data handling.
These changes improve the robustness of SMB2 symlink error processing.
Signed-off-by: Liang Jie <liangjie@lixiang.com>
Suggested-by: Tom Talpey <tom@talpey.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
[ Remove the __counted_by_le annotation in v6.1. ]
Signed-off-by: Alva Lan <alvalan9@foxmail.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 58689498ca ]
When tls_set_device_offload_rx() fails at tls_dev_add(), the error path
calls tls_sw_free_resources_rx() to clean up the SW context that was
initialized by tls_set_sw_offload(). This function calls
tls_sw_release_resources_rx() (which stops the strparser via
tls_strp_stop()) and tls_sw_free_ctx_rx() (which kfrees the context),
but never frees the anchor skb that was allocated by alloc_skb(0) in
tls_strp_init().
Note that tls_sw_free_resources_rx() is exclusively used for this
"failed to start offload" code path, there's no other caller.
The leak did not exist before commit 84c61fe1a7 ("tls: rx: do not use
the standard strparser"), because the standard strparser doesn't try
to pre-allocate an skb.
The normal close path in tls_sk_proto_close() handles cleanup by calling
tls_sw_strparser_done() (which calls tls_strp_done()) after dropping
the socket lock, because tls_strp_done() does cancel_work_sync() and
the strparser work handler takes the socket lock.
Fixes: 84c61fe1a7 ("tls: rx: do not use the standard strparser")
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Reviewed-by: Vadim Fedorenko <vadim.fedorenko@linux.dev>
Link: https://patch.msgid.link/20260428231559.1358502-1-kuba@kernel.org
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 54ef024879 ]
ice_reset_all_vfs() ignores the return value of ice_vf_rebuild_vsi().
When the VSI rebuild fails (e.g. during NVM firmware update via
nvmupdate64e), ice_vsi_rebuild() tears down the VSI on its error path,
leaving txq_map and rxq_map as NULL. The subsequent unconditional call
to ice_vf_post_vsi_rebuild() leads to a NULL pointer dereference in
ice_ena_vf_q_mappings() when it accesses vsi->txq_map[0].
The single-VF reset path in ice_reset_vf() already handles this
correctly by checking the return value of ice_vf_reconfig_vsi() and
skipping ice_vf_post_vsi_rebuild() on failure.
Apply the same pattern to ice_reset_all_vfs(): check the return value
of ice_vf_rebuild_vsi() and skip ice_vf_post_vsi_rebuild() and
ice_eswitch_attach_vf() on failure. The VF is left safely disabled
(ICE_VF_STATE_INIT not set, VFGEN_RSTAT not set to VFACTIVE) and can
be recovered via a VFLR triggered by a PCI reset of the VF
(sysfs reset or driver rebind).
Note that this patch does not prevent the VF VSI rebuild from failing
during NVM update — the underlying cause is firmware being in a
transitional state while the EMP reset is processed, which can cause
Admin Queue commands (ice_add_vsi, ice_cfg_vsi_lan) to fail. This
patch only prevents the subsequent NULL pointer dereference that
crashes the kernel when the rebuild does fail.
crash> bt
PID: 50795 TASK: ff34c9ee708dc680 CPU: 1 COMMAND: "kworker/u512:5"
#0 [ff72159bcfe5bb50] machine_kexec at ffffffffaa8850ee
#1 [ff72159bcfe5bba8] __crash_kexec at ffffffffaaa15fba
#2 [ff72159bcfe5bc68] crash_kexec at ffffffffaaa16540
#3 [ff72159bcfe5bc70] oops_end at ffffffffaa837eda
#4 [ff72159bcfe5bc90] page_fault_oops at ffffffffaa893997
#5 [ff72159bcfe5bce8] exc_page_fault at ffffffffab528595
#6 [ff72159bcfe5bd10] asm_exc_page_fault at ffffffffab600bb2
[exception RIP: ice_ena_vf_q_mappings+0x79]
RIP: ffffffffc0a85b29 RSP: ff72159bcfe5bdc8 RFLAGS: 00010206
RAX: 00000000000f0000 RBX: ff34c9efc9c00000 RCX: 0000000000000000
RDX: 0000000000000000 RSI: 0000000000000010 RDI: ff34c9efc9c00000
RBP: ff34c9efc27d4828 R8: 0000000000000093 R9: 0000000000000040
R10: ff34c9efc27d4828 R11: 0000000000000040 R12: 0000000000100000
R13: 0000000000000010 R14: R15:
ORIG_RAX: ffffffffffffffff CS: 0010 SS: 0018
#7 [ff72159bcfe5bdf8] ice_sriov_post_vsi_rebuild at ffffffffc0a85e2e [ice]
#8 [ff72159bcfe5be08] ice_reset_all_vfs at ffffffffc0a920b4 [ice]
#9 [ff72159bcfe5be48] ice_service_task at ffffffffc0a31519 [ice]
#10 [ff72159bcfe5be88] process_one_work at ffffffffaa93dca4
#11 [ff72159bcfe5bec8] worker_thread at ffffffffaa93e9de
#12 [ff72159bcfe5bf18] kthread at ffffffffaa946663
#13 [ff72159bcfe5bf50] ret_from_fork at ffffffffaa8086b9
The panic occurs attempting to dereference the NULL pointer in RDX at
ice_sriov.c:294, which loads vsi->txq_map (offset 0x4b8 in ice_vsi).
The faulting VSI is an allocated slab object but not fully initialized
after a failed ice_vsi_rebuild():
crash> struct ice_vsi 0xff34c9efc27d4828
netdev = 0x0,
rx_rings = 0x0,
tx_rings = 0x0,
q_vectors = 0x0,
txq_map = 0x0,
rxq_map = 0x0,
alloc_txq = 0x10,
num_txq = 0x10,
alloc_rxq = 0x10,
num_rxq = 0x10,
The nvmupdate64e process was performing NVM firmware update:
crash> bt 0xff34c9edd1a30000
PID: 49858 TASK: ff34c9edd1a30000 CPU: 1 COMMAND: "nvmupdate64e"
#0 [ff72159bcd617618] __schedule at ffffffffab5333f8
#4 [ff72159bcd617750] ice_sq_send_cmd at ffffffffc0a35347 [ice]
#5 [ff72159bcd6177a8] ice_sq_send_cmd_retry at ffffffffc0a35b47 [ice]
#6 [ff72159bcd617810] ice_aq_send_cmd at ffffffffc0a38018 [ice]
#7 [ff72159bcd617848] ice_aq_read_nvm at ffffffffc0a40254 [ice]
#8 [ff72159bcd6178b8] ice_read_flat_nvm at ffffffffc0a4034c [ice]
#9 [ff72159bcd617918] ice_devlink_nvm_snapshot at ffffffffc0a6ffa5 [ice]
dmesg:
ice 0000:13:00.0: firmware recommends not updating fw.mgmt, as it
may result in a downgrade. continuing anyways
ice 0000:13:00.1: ice_init_nvm failed -5
ice 0000:13:00.1: Rebuild failed, unload and reload driver
Fixes: 12bb018c53 ("ice: Refactor VF reset")
Signed-off-by: Petr Oros <poros@redhat.com>
Tested-by: Rafal Romanowski <rafal.romanowski@intel.com>
Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
Link: https://patch.msgid.link/20260427-jk-iwl-net-petr-oros-fixes-v1-5-cdcb48303fd8@intel.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit aeead3d04f ]
The Single Root IOV implementation of .post_vsi_rebuild performs some tasks
that will ultimately need to be shared with the Scalable IOV implementation
such as rebuilding the host configuration.
Refactor by introducing a new wrapper function, ice_vf_post_vsi_rebuild
which performs the tasks that will be shared between SR-IOV and Scalable
IOV. Move the ice_vf_rebuild_host_cfg and ice_vf_set_initialized calls into
this wrapper. Then call the implementation specific post_vsi_rebuild
handler afterwards.
This ensures that we will properly re-initialize filters and expected
settings for both SR-IOV and Scalable IOV.
Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
Tested-by: Marek Szlosek <marek.szlosek@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Stable-dep-of: 54ef024879 ("ice: fix NULL pointer dereference in ice_reset_all_vfs()")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 34d33313b5 ]
The V1 ADD_VLAN opcode had no success handler; filters sent via V1
stayed in ADDING state permanently. Add a fallthrough case so V1
filters also transition ADDING -> ACTIVE on PF confirmation.
Critically, add an `if (v_retval) break` guard: the error switch in
iavf_virtchnl_completion() does NOT return after handling errors,
it falls through to the success switch. Without this guard, a
PF-rejected ADD would incorrectly mark ADDING filters as ACTIVE,
creating a driver/HW mismatch where the driver believes the filter
is installed but the PF never accepted it.
For V2, this is harmless: iavf_vlan_add_reject() in the error
block already kfree'd all ADDING filters, so the success handler
finds nothing to transition.
Fixes: 968996c070 ("iavf: Fix VLAN_V2 addition/rejection")
Signed-off-by: Petr Oros <poros@redhat.com>
Reviewed-by: Aleksandr Loktionov <aleksandr.loktionov@intel.com>
Tested-by: Rafal Romanowski <rafal.romanowski@intel.com>
Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com>
Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
Link: https://patch.msgid.link/20260427-jk-iwl-net-petr-oros-fixes-v1-4-cdcb48303fd8@intel.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit bbcbe4ed70 ]
The VLAN filter DELETE path was asymmetric with the ADD path: ADD
waits for PF confirmation (ADD -> ADDING -> ACTIVE), but DELETE
immediately frees the filter struct after sending the DEL message
without waiting for the PF response.
This is problematic because:
- If the PF rejects the DEL, the filter remains in HW but the driver
has already freed the tracking structure, losing sync.
- Race conditions between DEL pending and other operations
(add, reset) cannot be properly resolved if the filter struct
is already gone.
Add IAVF_VLAN_REMOVING state to make the DELETE path symmetric:
REMOVE -> REMOVING (send DEL) -> PF confirms -> kfree
-> PF rejects -> ACTIVE
In iavf_del_vlans(), transition filters from REMOVE to REMOVING
instead of immediately freeing them. The new DEL completion handler
in iavf_virtchnl_completion() frees filters on success or reverts
them to ACTIVE on error.
Update iavf_add_vlan() to handle the REMOVING state: if a DEL is
pending and the user re-adds the same VLAN, queue it for ADD so
it gets re-programmed after the PF processes the DEL.
The !VLAN_FILTERING_ALLOWED early-exit path still frees filters
directly since no PF message is sent in that case.
Also update iavf_del_vlan() to skip filters already in REMOVING
state: DEL has been sent to PF and the completion handler will
free the filter when PF confirms. Without this guard, the sequence
DEL(pending) -> user-del -> second DEL could cause the PF to return
an error for the second DEL (filter already gone), causing the
completion handler to incorrectly revert a deleted filter back to
ACTIVE.
Fixes: 968996c070 ("iavf: Fix VLAN_V2 addition/rejection")
Signed-off-by: Petr Oros <poros@redhat.com>
Reviewed-by: Aleksandr Loktionov <aleksandr.loktionov@intel.com>
Tested-by: Rafal Romanowski <rafal.romanowski@intel.com>
Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com>
Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
Link: https://patch.msgid.link/20260427-jk-iwl-net-petr-oros-fixes-v1-3-cdcb48303fd8@intel.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit f2ce65b9b9 ]
When a VF goes down, the driver currently sends DEL_VLAN to the PF for
every VLAN filter (ACTIVE -> DISABLE -> send DEL -> INACTIVE), then
re-adds them all on UP (INACTIVE -> ADD -> send ADD -> ADDING ->
ACTIVE). This round-trip is unnecessary because:
1. The PF disables the VF's queues via VIRTCHNL_OP_DISABLE_QUEUES,
which already prevents all RX/TX traffic regardless of VLAN filter
state.
2. The VLAN filters remaining in PF HW while the VF is down is
harmless - packets matching those filters have nowhere to go with
queues disabled.
3. The DEL+ADD cycle during down/up creates race windows where the
VLAN filter list is incomplete. With spoofcheck enabled, the PF
enables TX VLAN filtering on the first non-zero VLAN add, blocking
traffic for any VLANs not yet re-added.
Remove the entire DISABLE/INACTIVE state machinery:
- Remove IAVF_VLAN_DISABLE and IAVF_VLAN_INACTIVE enum values
- Remove iavf_restore_filters() and its call from iavf_open()
- Remove VLAN filter handling from iavf_clear_mac_vlan_filters(),
rename it to iavf_clear_mac_filters()
- Remove DEL_VLAN_FILTER scheduling from iavf_down()
- Remove all DISABLE/INACTIVE handling from iavf_del_vlans()
VLAN filters now stay ACTIVE across down/up cycles. Only explicit
user removal (ndo_vlan_rx_kill_vid) or PF/VF reset triggers VLAN
filter deletion/re-addition.
Fixes: ed1f5b58ea ("i40evf: remove VLAN filters on close")
Signed-off-by: Petr Oros <poros@redhat.com>
Reviewed-by: Aleksandr Loktionov <aleksandr.loktionov@intel.com>
Tested-by: Rafal Romanowski <rafal.romanowski@intel.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com>
Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
Link: https://patch.msgid.link/20260427-jk-iwl-net-petr-oros-fixes-v1-2-cdcb48303fd8@intel.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
