[ Upstream commit 7786b10688 ]
A jack detection work that is unscheduled or in progress while executing
the suspend handler could trigger a race condition.
Ensure state consistency by cancelling any pending work or wait for its
execution to complete before processing the suspend. Since driver
(re)enables both insert and eject interrupts on resume, there is no risk
to miss the related jack events. Therefore, flush_delayed_work() is not
required here.
Fixes: aab1ad11d6 ("ASoC: nau8821: new driver")
Fixes: ee70bacef1 ("ASoC: nau8821: Avoid unnecessary blocking in IRQ handler")
Signed-off-by: Cristian Ciocaltea <cristian.ciocaltea@collabora.com>
Link: https://patch.msgid.link/20251231-nau8821-cleanup-v1-3-6b0b76cbbb64@collabora.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 6ebcbb53fc ]
compat_riscv_gpr_set() calls cregs_to_regs() unconditionally, even when
user_regset_copyin() fails. Since cregs is an uninitialized stack
variable, a copyin failure causes uninitialized stack data to be written
into the target task's pt_regs, corrupting its register state and
potentially leaking kernel stack contents.
compat_restore_sigcontext() has the same issue: it calls cregs_to_regs()
even when __copy_from_user() fails, leading to the same corruption of
the signal-returning task's register state on error.
Only call cregs_to_regs() when the user copy succeeds.
Fixes: 4608c15959 ("riscv: compat: ptrace: Add compat_arch_ptrace implement")
Fixes: 7383ee0531 ("riscv: compat: signal: Add rt_frame implementation")
Signed-off-by: Michael Neuling <mikey@neuling.org>
Assisted-by: Cursor:claude-4.6-opus-high-thinking
Link: https://patch.msgid.link/20260501062320.2339562-1-mikey@neuling.org
Signed-off-by: Paul Walmsley <pjw@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit a0c584fc18 ]
When querying info for an offloaded BPF map or program,
bpf_map_offload_info_fill_ns() and bpf_prog_offload_info_fill_ns()
obtain the network namespace with get_net(dev_net(offmap->netdev)).
However, the associated netdev's netns may be racing with teardown
during netns destruction. If the netns refcount has already reached 0,
get_net() performs a refcount_t increment on 0, triggering:
refcount_t: addition on 0; use-after-free.
Although rtnl_lock and bpf_devs_lock ensure the netdev pointer remains
valid, they cannot prevent the netns refcount from reaching zero.
Fix this by using maybe_get_net() instead of get_net(). maybe_get_net()
uses refcount_inc_not_zero() and returns NULL if the refcount is already
zero, which causes ns_get_path_cb() to fail and the caller to return
-ENOENT -- the correct behavior when the netns is being destroyed.
Fixes: 675fc275a3 ("bpf: offload: report device information for offloaded programs")
Fixes: 52775b33bb ("bpf: offload: report device information about offloaded maps")
Reported-by: Yinhao Hu <dddddd@hust.edu.cn>
Reported-by: Kaiyan Mei <M202472210@hust.edu.cn>
Reviewed-by: Dongliang Mu <dzm91@hust.edu.cn>
Closes: https://lore.kernel.org/bpf/f0aa3678-79c9-47ae-9e8c-02a3d1df160a@hust.edu.cn/
Signed-off-by: Jiayuan Chen <jiayuan.chen@linux.dev>
Acked-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/r/20260409023733.168050-1-jiayuan.chen@linux.dev
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 235f81045c ]
smc_clc_prfx_match() is called from smc_listen_work() and
not under RCU nor RTNL.
Using sk_dst_get(sk)->dev could trigger UAF.
Let's use __sk_dst_get() and dst_dev_rcu().
Note that the returned value of smc_clc_prfx_match() is not
used in the caller.
Fixes: a046d57da1 ("smc: CLC handshake (incl. preparation steps)")
Signed-off-by: Kuniyuki Iwashima <kuniyu@google.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Link: https://patch.msgid.link/20250916214758.650211-4-kuniyu@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 935d783e5d ]
smc_clc_prfx_set() is called during connect() and not under RCU
nor RTNL.
Using sk_dst_get(sk)->dev could trigger UAF.
Let's use __sk_dst_get() and dev_dst_rcu() under rcu_read_lock()
after kernel_getsockname().
Note that the returned value of smc_clc_prfx_set() is not used
in the caller.
While at it, we change the 1st arg of smc_clc_prfx_set[46]_rcu()
not to touch dst there.
Fixes: a046d57da1 ("smc: CLC handshake (incl. preparation steps)")
Signed-off-by: Kuniyuki Iwashima <kuniyu@google.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Link: https://patch.msgid.link/20250916214758.650211-3-kuniyu@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 0aa1b76fe1 ]
Another day, another syzkaller bug. KVM erroneously allows userspace to
pend vCPU events for a vCPU that hasn't been initialized yet, leading to
KVM interpreting a bunch of uninitialized garbage for routing /
injecting the exception.
In one case the injection code and the hyp disagree on whether the vCPU
has a 32bit EL1 and put the vCPU into an illegal mode for AArch64,
tripping the BUG() in exception_target_el() during the next injection:
kernel BUG at arch/arm64/kvm/inject_fault.c:40!
Internal error: Oops - BUG: 00000000f2000800 [#1] SMP
CPU: 3 UID: 0 PID: 318 Comm: repro Not tainted 6.17.0-rc4-00104-g10fd0285305d #6 PREEMPT
Hardware name: linux,dummy-virt (DT)
pstate: 21402009 (nzCv daif +PAN -UAO -TCO +DIT -SSBS BTYPE=--)
pc : exception_target_el+0x88/0x8c
lr : pend_serror_exception+0x18/0x13c
sp : ffff800082f03a10
x29: ffff800082f03a10 x28: ffff0000cb132280 x27: 0000000000000000
x26: 0000000000000000 x25: ffff0000c2a99c20 x24: 0000000000000000
x23: 0000000000008000 x22: 0000000000000002 x21: 0000000000000004
x20: 0000000000008000 x19: ffff0000c2a99c20 x18: 0000000000000000
x17: 0000000000000000 x16: 0000000000000000 x15: 00000000200000c0
x14: 0000000000000000 x13: 0000000000000000 x12: 0000000000000000
x11: 0000000000000000 x10: 0000000000000000 x9 : 0000000000000000
x8 : ffff800082f03af8 x7 : 0000000000000000 x6 : 0000000000000000
x5 : ffff800080f621f0 x4 : 0000000000000000 x3 : 0000000000000000
x2 : 000000000040009b x1 : 0000000000000003 x0 : ffff0000c2a99c20
Call trace:
exception_target_el+0x88/0x8c (P)
kvm_inject_serror_esr+0x40/0x3b4
__kvm_arm_vcpu_set_events+0xf0/0x100
kvm_arch_vcpu_ioctl+0x180/0x9d4
kvm_vcpu_ioctl+0x60c/0x9f4
__arm64_sys_ioctl+0xac/0x104
invoke_syscall+0x48/0x110
el0_svc_common.constprop.0+0x40/0xe0
do_el0_svc+0x1c/0x28
el0_svc+0x34/0xf0
el0t_64_sync_handler+0xa0/0xe4
el0t_64_sync+0x198/0x19c
Code: f946bc01 b4fffe61 9101e020 17fffff2 (d4210000)
Reject the ioctls outright as no sane VMM would call these before
KVM_ARM_VCPU_INIT anyway. Even if it did the exception would've been
thrown away by the eventual reset of the vCPU's state.
Cc: stable@vger.kernel.org # 6.17
Fixes: b7b27facc7 ("arm/arm64: KVM: Add KVM_GET/SET_VCPU_EVENTS")
Signed-off-by: Oliver Upton <oliver.upton@linux.dev>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 46cea215dc ]
There is a theoretical race window in j1939_sk_netdev_event_unregister()
where two j1939_sk_bind() calls jump in between read_unlock_bh() and
lock_sock().
The assumption jsk->priv == priv can fail if the first j1939_sk_bind()
call once made jsk->priv == NULL due to failed j1939_local_ecu_get() call
and the second j1939_sk_bind() call again made jsk->priv != NULL due to
successful j1939_local_ecu_get() call.
Since the socket lock is held by both j1939_sk_netdev_event_unregister()
and j1939_sk_bind(), checking ndev->reg_state with the socket lock held can
reliably make the second j1939_sk_bind() call fail (and close this race
window).
Fixes: 7fcbe5b2c6 ("can: j1939: implement NETDEV_UNREGISTER notification handler")
Signed-off-by: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
Acked-by: Oleksij Rempel <o.rempel@pengutronix.de>
Link: https://patch.msgid.link/5732921e-247e-4957-a364-da74bd7031d7@I-love.SAKURA.ne.jp
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 93a27b5891 ]
Currently NETDEV_UNREGISTER event handler is not calling
j1939_cancel_active_session() and j1939_sk_queue_drop_all().
This will result in these calls being skipped when j1939_sk_release() is
called. And I guess that the reason syzbot is still reporting
unregister_netdevice: waiting for vcan0 to become free. Usage count = 2
is caused by lack of these calls.
Calling j1939_cancel_active_session(priv, sk) from j1939_sk_release() can
be covered by calling j1939_cancel_active_session(priv, NULL) from
j1939_netdev_notify().
Calling j1939_sk_queue_drop_all() from j1939_sk_release() can be covered
by calling j1939_sk_netdev_event_netdown() from j1939_netdev_notify().
Therefore, we can reuse j1939_cancel_active_session(priv, NULL) and
j1939_sk_netdev_event_netdown(priv) for NETDEV_UNREGISTER event handler.
Fixes: 7fcbe5b2c6 ("can: j1939: implement NETDEV_UNREGISTER notification handler")
Signed-off-by: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
Tested-by: Oleksij Rempel <o.rempel@pengutronix.de>
Acked-by: Oleksij Rempel <o.rempel@pengutronix.de>
Link: https://patch.msgid.link/3ad3c7f8-5a74-4b07-a193-cb0725823558@I-love.SAKURA.ne.jp
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 7fcbe5b2c6 ]
syzbot is reporting
unregister_netdevice: waiting for vcan0 to become free. Usage count = 2
problem, for j1939 protocol did not have NETDEV_UNREGISTER notification
handler for undoing changes made by j1939_sk_bind().
Commit 25fe97cb76 ("can: j1939: move j1939_priv_put() into sk_destruct
callback") expects that a call to j1939_priv_put() can be unconditionally
delayed until j1939_sk_sock_destruct() is called. But we need to call
j1939_priv_put() against an extra ref held by j1939_sk_bind() call
(as a part of undoing changes made by j1939_sk_bind()) as soon as
NETDEV_UNREGISTER notification fires (i.e. before j1939_sk_sock_destruct()
is called via j1939_sk_release()). Otherwise, the extra ref on "struct
j1939_priv" held by j1939_sk_bind() call prevents "struct net_device" from
dropping the usage count to 1; making it impossible for
unregister_netdevice() to continue.
Reported-by: syzbot <syzbot+881d65229ca4f9ae8c84@syzkaller.appspotmail.com>
Closes: https://syzkaller.appspot.com/bug?extid=881d65229ca4f9ae8c84
Tested-by: syzbot <syzbot+881d65229ca4f9ae8c84@syzkaller.appspotmail.com>
Fixes: 9d71dd0c70 ("can: add support of SAE J1939 protocol")
Fixes: 25fe97cb76 ("can: j1939: move j1939_priv_put() into sk_destruct callback")
Signed-off-by: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
Tested-by: Oleksij Rempel <o.rempel@pengutronix.de>
Acked-by: Oleksij Rempel <o.rempel@pengutronix.de>
Link: https://patch.msgid.link/ac9db9a4-6c30-416e-8b94-96e6559d55b2@I-love.SAKURA.ne.jp
[mkl: remove space in front of label]
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit bd9f6ce7d5 ]
In fimc_is_hw_change_mode(), the function changes camera modes without
waiting for hardware completion, risking corrupted data or system hangs
if subsequent operations proceed before the hardware is ready.
Add fimc_is_hw_wait_intmsr0_intmsd0() after mode configuration, ensuring
hardware state synchronization and stable interrupt handling.
Signed-off-by: Wentao Liang <vulab@iscas.ac.cn>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit d93a6caab5 ]
Previously, when the driver was printing hex dumps, the buffer was cast
to an 8 byte long and printed using string formatters. If the buffer
size was not a multiple of 8 then a read buffer overflow was possible.
Therefore, create a new ibmvnic function that loops over a buffer and
calls hex_dump_to_buffer instead.
This patch address KASAN reports like the one below:
ibmvnic 30000003 env3: Login Buffer:
ibmvnic 30000003 env3: 01000000af000000
<...>
ibmvnic 30000003 env3: 2e6d62692e736261
ibmvnic 30000003 env3: 65050003006d6f63
==================================================================
BUG: KASAN: slab-out-of-bounds in ibmvnic_login+0xacc/0xffc [ibmvnic]
Read of size 8 at addr c0000001331a9aa8 by task ip/17681
<...>
Allocated by task 17681:
<...>
ibmvnic_login+0x2f0/0xffc [ibmvnic]
ibmvnic_open+0x148/0x308 [ibmvnic]
__dev_open+0x1ac/0x304
<...>
The buggy address is located 168 bytes inside of
allocated 175-byte region [c0000001331a9a00, c0000001331a9aaf)
<...>
=================================================================
ibmvnic 30000003 env3: 000000000033766e
Fixes: 032c5e8284 ("Driver for IBM System i/p VNIC protocol")
Signed-off-by: Nick Child <nnac123@linux.ibm.com>
Reviewed-by: Dave Marquardt <davemarq@linux.ibm.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20250320212951.11142-1-nnac123@linux.ibm.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit b5799dd770 ]
Added a check for "read-only" mode in the `jfs_truncate_nolock`
function to avoid errors related to writing to a read-only
filesystem.
Call stack:
block_write_begin() {
jfs_write_failed() {
jfs_truncate() {
jfs_truncate_nolock() {
txEnd() {
...
log = JFS_SBI(tblk->sb)->log;
// (log == NULL)
If the `isReadOnly(ip)` condition is triggered in
`jfs_truncate_nolock`, the function execution will stop, and no
further data modification will occur. Instead, the `xtTruncate`
function will be called with the "COMMIT_WMAP" flag, preventing
modifications in "read-only" mode.
Fixes: 1da177e4c3 ("Linux-2.6.12-rc2")
Reported-by: syzbot+4e89b5368baba8324e07@syzkaller.appspotmail.com
Link: https://syzkaller.appspot.com/bug?extid=4e89b5368baba8324e07
Signed-off-by: Vasiliy Kovalev <kovalev@altlinux.org>
Signed-off-by: Dave Kleikamp <dave.kleikamp@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit c13fda93ac ]
The syzbot reported that the lwt_seg6 related BPF ops can be invoked
via bpf_test_run() without without entering input_action_end_bpf()
first.
Martin KaFai Lau said that self test for BPF_PROG_TYPE_LWT_SEG6LOCAL
probably didn't work since it was introduced in commit 04d4b274e2a
("ipv6: sr: Add seg6local action End.BPF"). The reason is that the
per-CPU variable seg6_bpf_srh_states::srh is never assigned in the self
test case but each BPF function expects it.
Remove test_run for BPF_PROG_TYPE_LWT_SEG6LOCAL.
Suggested-by: Martin KaFai Lau <martin.lau@linux.dev>
Reported-by: syzbot+608a2acde8c5a101d07d@syzkaller.appspotmail.com
Fixes: d1542d4ae4 ("seg6: Use nested-BH locking for seg6_bpf_srh_states.")
Fixes: 004d4b274e ("ipv6: sr: Add seg6local action End.BPF")
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Acked-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/r/20240710141631.FbmHcQaX@linutronix.de
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit fa091f46c3 ]
perf_event_remove_on_exec() sets remove-on-exec events to the EXIT state
and detaches their group relationships. The event's file descriptor can
remain open, however, and perf_event_open() currently accepts that event
as a group leader because its early validation rejects only REVOKED and
DEAD events.
A new sibling can consequently be linked to the detached leader. When
the leader is closed, perf_group_detach() observes that its
PERF_ATTACH_GROUP bit is already clear and skips the new sibling. The
sibling then retains a group_leader pointer to the freed event.
Reject group leaders in the EXIT state. Perform the check while holding
the shared context mutex so that an exec in the target task cannot detach
the leader between validation and group attachment.
[peterz: make the earlier test fully consistent]
Fixes: 037a3c43ed ("perf/core: Detach event groups during remove_on_exec")
Assisted-by: Codex:gpt-5.6-sol
Signed-off-by: Kyle Zeng <kylebot@openai.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://patch.msgid.link/20260806205655.75722-1-kylebot@openai.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
commit 12659d2861 upstream.
Currently, KF_ARG_PTR_TO_ITER handling missed checking the reg->type and
ensuring it is PTR_TO_STACK. Instead of enforcing this in the caller of
process_iter_arg, move the check into it instead so that all callers
will gain the check by default. This is similar to process_dynptr_func.
An existing selftest in verifier_bits_iter.c fails due to this change,
but it's because it was passing a NULL pointer into iter_next helper and
getting an error further down the checks, but probably meant to pass an
uninitialized iterator on the stack (as is done in the subsequent test
below it). We will gain coverage for non-PTR_TO_STACK arguments in later
patches hence just change the declaration to zero-ed stack object.
Fixes: 06accc8779 ("bpf: add support for open-coded iterator loops")
Suggested-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Tao Lyu <tao.lyu@epfl.ch>
[ Kartikeya: move check into process_iter_arg, rewrite commit log ]
Signed-off-by: Kumar Kartikeya Dwivedi <memxor@gmail.com>
Link: https://lore.kernel.org/r/20241203000238.3602922-2-memxor@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
[ Xu Yunxiang: Resolve the verifier.c context conflict by retaining the
6.6.y BTF lookup and its regno diagnostic convention. Omit the
verifier_bits_iter.c change because that selftest does not exist in
6.6.y. ]
Assisted-by: Pi:GLM-5.3
[ sashal: print regno - 1 to match upstream and 6.6's own 0-based arg#
messages in check_kfunc_args(); supersedes the regno convention noted
above ]
Signed-off-by: Xu Yunxiang <xyx2021@mail.ustc.edu.cn>
Signed-off-by: Sasha Levin <sashal@kernel.org>
This reverts commit 319f7a85b3.
The reverted commit uses disable_delayed_work_sync, which was introduced
by commit 86898fa6b8 ("workqueue: Implement disable/enable for
(delayed) work items") in v6.10. The function is therefore unavailable
in 6.6.y, causing configurations that enable CONFIG_FSL_USB2_OTG to fail
to build.
The upstream commit is unaffected; only its incompatible stable backport
is being reverted.
Fixes: 319f7a85b3 ("usb: phy: fsl-usb: Fix use-after-free in delayed work during device removal")
Link: https://lore.kernel.org/stable/20260827154302.706689-1-ralf@mandelbit.com/
Signed-off-by: Ralf Lici <ralf@mandelbit.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
commit 297b5ccea4 upstream.
create_worker_cb() reserves an io-wq worker slot only after its
task-work callback runs. If the callback is canceled before then,
io_worker_cancel_cb() still decrements acct->nr_workers. When an
existing worker retires with its creation callback pending, that
worker has already decremented the same account's worker count.
The resulting undercount permits worker creation beyond the account's
configured limit. On an AST2600 OpenBMC system, an unchanged sensor
daemon reached 4,291 threads with the original kernel. With an
equivalent downstream fix, 25 passive samples under its normal
workload showed 6-9 threads.
Decrement nr_workers only when the canceled callback is not
create_worker_cb(). Continuation callbacks still release their reserved
slot, and both callback types retain the existing running-count,
reference-count, and create-state cleanup.
[ Backport: retain the existing wq->lock protecting worker accounting. ]
Fixes: 1d5f5ea7cb ("io-wq: remove worker to owner tw dependency")
Cc: stable@vger.kernel.org
Assisted-by: Codex:gpt-5.6-sol
Reviewed-by: Gabriel Krisman Bertazi <krisman@suse.de>
Link: https://patch.msgid.link/20260811-vrazdan-io-wq-b4-submit-v1-1-719ced16c921@openai.com
Signed-off-by: Vishnu Razdan <vrazdan@openai.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
commit da32af420d upstream.
Currently, when a new encrypted regular file is created, the call to
ext4_set_inode_flags(inode, init=true) in __ext4_new_inode() is made
before EXT4_INODE_ENCRYPT is set. As a result, it can set S_DAX if the
filesystem is mounted with "-o dax=always".
EXT4_INODE_ENCRYPT then actually gets set a bit later in
__ext4_new_inode(), when it calls fscrypt_set_context() which calls
ext4_set_context(). ext4_set_context() sets EXT4_INODE_ENCRYPT and
calls ext4_set_inode_flags(inode, init=false) to set S_ENCRYPTED too.
This was intended to clear S_DAX as well. However, this was broken by
commit 043546e46d ("fs/ext4: Only change S_DAX on inode load"). This
causes data written to the file to bypass encryption, also causing
xfstests failures such as generic/548 (when "-o dax=always" is used).
Fix this by simplifying the flow by making __ext4_new_inode() set
EXT4_INODE_ENCRYPT earlier. This makes it take effect in
ext4_set_inode_flags(inode, init=true), making S_DAX never be set.
Similarly, make EXT4_STATE_MAY_INLINE_DATA never be set in the first
place on new encrypted inodes. Then it doesn't need to be cleared.
As a result of these simplifications, ext4_set_context() no longer needs
to change inode flags or state when 'handle != NULL'. Remove that too.
Reported-by: Disha Goel <disgoel@linux.ibm.com>
Reported-by: Ojaswin Mujoo <ojaswin@linux.ibm.com>
Closes: https://lore.kernel.org/r/20260723085648.1500357-1-ojaswin@linux.ibm.com
Fixes: 043546e46d ("fs/ext4: Only change S_DAX on inode load")
Cc: stable@vger.kernel.org
Signed-off-by: Eric Biggers <ebiggers@kernel.org>
Tested-by: Disha Goel <disgoel@linux.ibm.com>
Reviewed-by: Ojaswin Mujoo <ojaswin@linux.ibm.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Link: https://patch.msgid.link/20260730175212.36923-1-ebiggers@kernel.org
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Sasha Levin <sashal@kernel.org>
commit 0f38453cdb upstream.
kvm_gfn_is_write_tracked() checks only the supplied memslot, but page
tracking is per-address-space and shadow pages are shared across all
address spaces. With SMM, a GFN can therefore be write-tracked in one
address space and appear untracked through the other.
Check the supplied slot first, then the slot for the other address space.
This ensures all callers honor write tracking regardless of the active
address space. In particular, it prevents mmu_try_to_unsync_pages() from
marking an upper-level shadow page unsync and eventually triggering the
BUG in pte_list_remove().
Fixes: 699023e239 ("KVM: x86: add SMM to the MMU role, support SMRAM address space")
Assisted-by: Codex:GPT-5
Signed-off-by: Jinu Kim <kimjw04271234@gmail.com>
Message-ID: <20260721103512.2136240-2-kimjw04271234@gmail.com>
[invert direction of the conditional. - Paolo]
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
[ artem: adapt to 6.6, which has neither KVM_MAX_NR_ADDRESS_SPACES nor
kvm_arch_nr_memslot_as_ids(); use KVM_ADDRESS_SPACE_NUM instead. That
macro is CONFIG_KVM_SMM-conditional in 6.6, so the guard on
KVM_ADDRESS_SPACE_NUM > 1 around the peer-slot lookup is retained ]
Signed-off-by: Artem Dinaburg <artem@trailofbits.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
commit d5dc1e69fd upstream.
A virtio_net_hdr (tun/tap, or AF_PACKET with PACKET_VNET_HDR) can mark
an IPv4 or IPv6 fragment as GSO; nothing relates gso_type to frag_off.
inet_frag_reasm_prepare()/inet_frag_reasm_finish() keep the first
fragment's skb as the head of the reassembled datagram, including its
shinfo->gso_size/gso_type/gso_segs, and chain the remaining fragments
on frag_list with whatever linear/paged layout they arrived with.
After ip_defrag() (ip_local_deliver(), nf_defrag_ipv4, ...) the
reassembled skb therefore still claims to be GSO (SKB_GSO_DODGY), and
the next software segmentation point - udp_rcv_segment() on local
delivery, validate_xmit_skb(), or the ip_finish_output_gso() slow
path - hands it to skb_segment(). skb_segment()'s frag_list walk
assumes GRO-shaped input and hits one of its BUG_ON()s. Two writes to
a tap by an unprivileged user in its own userns are enough:
kernel BUG at net/core/skbuff.c:4899!
Oops: invalid opcode: 0000 [#1] SMP KASAN NOPTI
CPU: 0 UID: 1000 PID: 82 Comm: poc Not tainted 7.2.0-pentest+ #2
RIP: 0010:skb_segment+0x20ca/0x48b0
Call Trace:
<TASK>
__udp_gso_segment+0x29a/0x27d0
udp4_ufo_fragment+0x458/0x6c0
inet_gso_segment+0x429/0x1340
skb_mac_gso_segment+0x233/0x4f0
__skb_gso_segment+0x308/0x660
udp_queue_rcv_skb+0x440/0xad0
udp_unicast_rcv_skb+0xc7/0x2c0
udp_rcv+0x16ce/0x2260
ip_protocol_deliver_rcu+0x197/0x2d0
ip_local_deliver+0x430/0x690
ip_rcv+0x16f/0x1f0
__netif_receive_skb_one_core+0x15e/0x1c0
__netif_receive_skb+0x1e/0x110
netif_receive_skb+0xf6/0x5c0
tun_rx_batched.isra.0+0x3ab/0x790
tun_get_user+0x17c3/0x3550
tun_chr_write_iter+0xba/0x1b0
vfs_write+0x646/0x1130
</TASK>
Kernel panic - not syncing: Fatal exception in interrupt
This runs with BH disabled, so it is a panic rather than an oops. The
same is reachable with CAP_NET_RAW in a netns where a defrag point
precedes a GSO point, and from a guest whose VMM forwards
virtio_net_hdr to a tap. The SKB_GSO_DODGY frag_list checks added by
commit 3dcbdb134f ("net: gso: Fix skb_segment splat when splitting
gso_size mangled skb having linear-headed frag_list") and by
commit 9e4b7a99a0 ("net: gso: fix panic on frag_list with mixed head
alloc types") do not cover it: page-backed heads skip them, and kmalloc
heads skip them when gso_size == skb_headlen(head), which the sender
controls.
An skb entering a frag queue is an IP fragment by definition and
cannot legitimately carry GSO state: GRO does not merge fragments and
the stack segments before it fragments, so only untrusted sources are
affected. This has been reachable since
commit f43798c276 ("tun: Allow GSO using virtio_net_hdr"), the first
path that let userspace attach GSO metadata to an IP fragment. Reset
the GSO fields of every fragment as it is queued, in
inet_frag_queue_insert(), which IPv4, IPv6, nf_conntrack_reasm and
6lowpan reassembly share; then neither the head nor the frag_list
members of the reassembled skb carry them (the members matter too:
the ip_do_fragment()/ip6_fragment() fast paths send them out as they
are). The head may remain CHECKSUM_PARTIAL; that is already accepted
on receive and resolved by skb_checksum_help() in
ip_do_fragment()/ip6_fragment() on forward.
Tested on top of net.git (dc4b95b8fe), x86_64: the tap reproducer
above, two further IPv4 frag_list geometries that reach
BUG_ON(i >= nfrags) and BUG_ON(!list_skb->head_frag), and an IPv6
fragment-header variant (udp6_ufo_fragment()) each panic the unpatched
kernel; with this patch all four datagrams are delivered intact and
nothing is logged.
Fixes: f43798c276 ("tun: Allow GSO using virtio_net_hdr")
Cc: stable@kernel.org
Suggested-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: Xinyang Ge <xinyang@anthropic.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Link: https://patch.msgid.link/937926e509f2acd8e0e66520dc2b30fd6b4d1687.1787839506.git.pabeni@redhat.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
When GRO attempts to aggregate packets beyond GRO_LEGACY_MAX_SIZE (64KB),
BIG TCP should only be permitted for plain IPv4 TCP and plain IPv6 TCP
(with sufficient MAC header room to insert the temporary HBH jumbo header).
However, commit b1a78b9b98 ("net: add support for ipv4 big tcp")
loosened the check in skb_gro_receive(), leading to several issues:
1. skb_gro_receive() checked skb_headroom(p) instead of the actual space
before the MAC header (p->mac_header). Because skb_headroom(p) includes
mac_len, crafted frames (e.g. injected via AF_PACKET) can pass the check
with p->mac_header < 8 bytes. When ipv6_gro_complete() inserts the
temporary HBH jumbo header, the memmove() starts before skb->head,
causing an out-of-bounds write and wrapping skb->mac_header.
2. It allowed non-IP protocols such as software VLAN (ETH_P_8021Q /
ETH_P_8021AD) to aggregate beyond 64KB because
p->protocol != ETH_P_IPV6 was true.
3. It checked p->encapsulation instead of NAPI_GRO_CB(skb)->encap_mark,
allowing encapsulated flows (e.g. SIT / IPv6-in-IPv4) to aggregate
beyond 64KB.
Fix skb_gro_receive() to strictly enforce:
- NAPI_GRO_CB(skb)->proto == IPPROTO_TCP
- Not encapsulated (!NAPI_GRO_CB(skb)->encap_mark && !p->encapsulation)
- Protocol must be either ETH_P_IP or ETH_P_IPV6
- If ETH_P_IPV6, p->mac_header must be at least
sizeof(struct hop_jumbo_hdr)
Returning -E2BIG from skb_gro_receive() ensures that packets which cannot
become BIG TCP are cleanly flushed at <= 64KB and delivered intact without
dropping.
This issue does not exist in mainline (7.0+) because the subsystem was
rewritten in commit 81be30c1f5 ("net/ipv6: Drop HBH for BIG TCP on RX
side"), making this fix relevant only for older stable branches like
6.18.y.
Fixes: 0fe79f28bf ("net: allow gro_max_size to exceed 65536")
Fixes: b1a78b9b98 ("net: add support for ipv4 big tcp")
Reported-by: Sam Dlinn <sledge@meta.com>
Cc: stable@vger.kernel.org
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 0acd4eeb4b upstream.
The Command Complete dispatch validates only the fixed part of the LE Set
CIG Parameters response. After that part is pulled from the skb,
hci_cc_le_set_cig_params() trusts num_handles and reads each entry in the
trailing handle array.
Matching num_handles against the command's num_cis does not guarantee
that the response contains the advertised handles. A truncated response
from a malfunctioning controller can therefore make the handler read
beyond the skb data.
Validate that the remaining skb data contains all advertised handles.
Include this in the existing response validation so malformed responses
also follow the established CIG failure handling.
Fixes: 26afbd826e ("Bluetooth: Add initial implementation of CIS connections")
Cc: stable@vger.kernel.org
Signed-off-by: Laxman Acharya Padhya <acharyalaxman8848@gmail.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 33af47e847 upstream.
hci_cc_reset() clears the LE accept and resolving lists without taking
hdev->lock. Other command-complete handlers serialize updates to these
lists with that lock, and the debugfs readers hold it while walking them.
This permits the reset completion and a debugfs read to interleave as
follows:
hci_rx_work debugfs reader
----------- --------------
lock hdev->lock
fetch current entry
list_del(entry)
kfree(entry)
read entry fields
The reader then dereferences a freed list entry and may follow its stale
next pointer.
KASAN reported:
BUG: KASAN: slab-use-after-free in white_list_show+0x15f/0x180
Read of size 1 at addr ffff8881015dab16 by task poc/95
Call Trace:
white_list_show+0x15f/0x180
seq_read_iter+0x3ff/0x1190
seq_read+0x267/0x3d0
vfs_read+0x177/0xa20
ksys_read+0xf7/0x1c0
Allocated by task 91:
hci_bdaddr_list_add+0x1a6/0x3a0
hci_cc_le_add_to_accept_list+0xab/0x140
hci_cmd_complete_evt+0x26c/0x9a0
hci_event_packet+0x454/0xb20
hci_rx_work+0x293/0x730
Freed by task 90:
kfree+0x131/0x3c0
hci_bdaddr_list_clear+0xd8/0x160
hci_cc_reset+0x28a/0x370
hci_cmd_complete_evt+0x26c/0x9a0
hci_event_packet+0x454/0xb20
hci_rx_work+0x293/0x730
Take hdev->lock around both list clears. This matches the existing
mutation and traversal locking convention.
Fixes: a4d5504d5c ("Bluetooth: Clear LE white list when resetting controller")
Fixes: cfdb0c2d09 ("Bluetooth: Store Resolv list size")
Cc: stable@vger.kernel.org
Signed-off-by: Chengfeng Ye <nicoyip.dev@gmail.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 934b7778aa upstream.
The Hyper-V synthetic HID host supplies SYNTH_HID_INITIAL_DEVICE_INFO
messages that contain a HID descriptor followed by the report descriptor
bytes. mousevsc_on_receive_device_info() trusts bLength and
wDescriptorLength without checking that the received packet contains both
byte ranges.
A malformed host or backend message can therefore make the guest read
past the received VMBus packet while copying the report descriptor. Pass
the received initial-device-info size into the parser and reject
descriptor lengths that exceed the packet.
Impact: A malicious Hyper-V host or backend can crash a guest by sending
a short initial device-info message with an oversized HID report
descriptor length.
Fixes: b95f5bcb81 ("HID: Move the hid-hyperv driver out of staging")
Cc: stable@vger.kernel.org
Assisted-by: Codex:gpt-5-5-xhigh
Signed-off-by: Michael Bommarito <michael.bommarito@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit ad8fb82b04 upstream.
enable_sensor_store() can call set_power_report_state(), which
dereferences sensor_inst->power_state and sensor_inst->report_state.
These pointers refer to entries in sensor_inst->fields.
Create the field attributes before exposing the enable_sensor sysfs
attribute, so enable_sensor cannot be accessed before the state it
depends on has been initialized.
On remove, delete enable_sensor before freeing the field attributes,
so a concurrent sysfs write cannot dereference freed memory through
power_state or report_state.
Reported-by: Sashiko AI Review <sashiko-bot@kernel.org>
Link: https://sashiko.dev/#/patchset/20260623021950.1736413-1-haoxiang_li2024@163.com?part=1
Fixes: 4a7de0519d ("HID: sensor: Custom and Generic sensor support")
Cc: stable@vger.kernel.org
Signed-off-by: Haoxiang Li <haoxiang_li2024@163.com>
Acked-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 28abce9513 upstream.
When fetch_item() is called by hid_scan_report() on an item with
HID_ITEM_TAG_LONG, it stores a pointer to the item data in
item->data.longdata instead of storing a value directly in
item->data.{u8/u16/u32}.
When item_udata() or item_sdata() encounters such an item, it incorrectly
assumes that the item is in short format, and therefore returns the lower
part of a kernel pointer reinterpreted as a number.
When a HID device is connected whose descriptor contains a
HID_GLOBAL_ITEM_TAG_REPORT_SIZE encoded in long format with size=4, this
causes the lower half of a kernel pointer to be printed into dmesg as a
number, like this:
hid (null): invalid report_size 107953555
To fix it, let item_udata() and item_sdata() verify that the item is in
short format.
Note that this bug only affects hid_scan_report(), while the main parsing
pass hid_parse_collections() will always bail out when encountering a long
item.
Sidenote: There are currently no users of data.longdata; maybe we should
just remove any parsing of long-format descriptors as a follow-up.
Fixes: 3dc8fc083d ("HID: Use hid_parser for pre-scanning the report descriptors")
Cc: stable@vger.kernel.org
Signed-off-by: Jann Horn <jannh@google.com>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 27b376b945 upstream.
joycon_ctlr_read_handler() casts an incoming HID input report to
struct joycon_input_report and parses it, guarding the cast only with a
12-byte length check:
if (size >= 12) /* make sure it contains the input report */
joycon_parse_report(ctlr, (struct joycon_input_report *)data);
struct joycon_input_report is 49 bytes: a 13-byte header followed by a
union whose IMU arm is 36 bytes. For an IMU report joycon_parse_report()
-> joycon_parse_imu_report() walks that union (struct offsets 13..48),
so a report of exactly 12 bytes with data[0] == JC_INPUT_IMU_DATA passes
the guard yet is read up to 37 bytes past its declared length. The
over-read bytes are decoded into accelerometer/gyroscope values and
forwarded to userspace through the "(IMU)" input device, leaking
driver-internal memory. data[0] and size are fully controlled by a
malicious or spoofed Joy-Con/Pro Controller.
Receive buffers are sized to the maximum report length, so this is an
over-read within the allocation rather than a slab OOB, but the decoded
bytes still reach userspace.
The sibling subcmd path in joycon_ctlr_handle_event() already bounds the
same cast correctly:
if (size < sizeof(struct joycon_input_report) ||
data[0] != JC_INPUT_SUBCMD_REPLY)
break;
Use the same sizeof(struct joycon_input_report) bound here.
Fixes: 2af16c1f84 ("HID: nintendo: add nintendo switch controller driver")
Cc: stable@vger.kernel.org
Signed-off-by: Ibrahim Hashimov <security@auditcode.ai>
Assisted-by: AuditCode-AI:2026.07
Reviewed-by: Silvan Jegen <s.jegen@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit efc33b5102 ]
mptcp_pm_destroy() empties msk->pm.anno_list and
msk->pm.userspace_pm_local_addr_list under msk->pm.lock during socket
teardown, dropping the lock between the two.
A concurrent userspace PM genl ANNOUNCE on the same msk holds a sock
reference via mptcp_token_get_sock() and, in
mptcp_pm_nl_announce_doit(), calls
mptcp_userspace_pm_append_new_local_addr() and
mptcp_pm_announced_alloc(). Both take msk->pm.lock briefly to add to
their respective lists. Because the genl handler holds a sock reference,
mptcp_pm_destroy() may run on the same msk via mptcp_disconnect(), which
invokes mptcp_destroy_common() without dropping the sock refcount,
before the handler completes.
If the lock acquisitions interleave such that mptcp_pm_destroy() empties
a list first, the later alloc adds its entry to a list head that nothing
else iterates for this msk, and the entry leaks. kmemleak reports both
mptcp_pm_add_addr objects (from mptcp_pm_announced_alloc()) and
mptcp_pm_addr_entry objects (from
mptcp_userspace_pm_append_new_local_addr()) under sustained concurrent
ANNOUNCE + close load against the userspace PM.
Add an MPTCP_PM_DESTROYING bit in msk->pm.status, set by
mptcp_pm_destroy() under pm.lock before the lists are emptied and
checked under pm.lock by the alloc paths. Either the alloc takes pm.lock
first, in which case its entry is on the list when mptcp_pm_destroy()
frees it; or mptcp_pm_destroy() takes pm.lock first, in which case the
later alloc observes the bit and refuses.
Found by an MPTCP protocol-flow harness extending BRF (arXiv:2305.08782).
Fixes: 9ab4807c84 ("mptcp: netlink: Add MPTCP_PM_CMD_ANNOUNCE")
Cc: stable@vger.kernel.org
Signed-off-by: Shardul Bankar <shardul.b@mpiricsoftware.com>
Reviewed-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://patch.msgid.link/20260803-net-mptcp-misc-fixes-7-2-rc6-v2-6-b8f496d71664@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
[ Inlined `mptcp_pm_destroy()` at its call site in `mptcp_destroy_common()` and moved the fences into the pre-rename `mptcp_pm_alloc_anno_list()`/`mptcp_free_local_addr_list()` equivalents, deleting the `mptcp_pm_is_userspace()` guard from inside the callee instead of the call site. ]
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 410c44b109 ]
The internal keyboard on the HONOR ZQC-P (HONOR MagicBook Pro 14 2026)
does not work after boot.
Using the kernel command line 'i8042.dumbkbd=1' makes the keyboard
functional, but the CapsLock LED does not work. Adding the
'atkbd_deactivate_fixup' quirk fixes the keyboard and CapsLock LED
natively without requiring boot parameters.
DMI: HONOR ZQC-P/ZQC-P-PCB, BIOS 1.09 03/19/2026
Fixes: 9cf6e24c9f ("Input: atkbd - do not skip atkbd_deactivate() when skipping ATKBD_CMD_GETID")
Signed-off-by: Donglin Lyu <donglin_lyu@outlook.com>
Tested-by: Ruslan Shevchenko <adefka@gmail.com>
Link: https://patch.msgid.link/20260801151115.52709-1-donglin_lyu@outlook.com
Cc: stable@vger.kernel.org
[dtor: keep all HONOR entries together]
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit cdc36db204 ]
hci_find_adv_instance() returns an adv_info pointer that is valid only
while hdev->lock is held. The advertising command-sync paths perform
instance lookups without that lock and, in some cases, retain the pointer
while waiting for a controller response.
An advertising termination event can therefore interleave as follows:
hci_cmd_sync_work hci_rx_work
hci_find_adv_instance()
__hci_cmd_sync_status()
wait for controller reply hci_dev_lock()
hci_remove_adv_instance()
kfree(adv)
adv->scan_rsp_changed = false
KASAN reported:
BUG: KASAN: slab-use-after-free in hci_set_ext_scan_rsp_data_sync+0x2e1/0x300
Write of size 1 at addr ffff88810a45d21d by task kworker/u17:0/88
Workqueue: hci0 hci_cmd_sync_work
Call Trace:
hci_set_ext_scan_rsp_data_sync+0x2e1/0x300
hci_schedule_adv_instance_sync+0x390/0x4c0
hci_cmd_sync_work+0x173/0x300
Allocated by task 87:
hci_add_adv_instance+0x538/0xac0
add_advertising+0x885/0x1160
Freed by task 89:
kfree+0x131/0x3c0
hci_remove_adv_instance+0x1d8/0x3b0
hci_le_ext_adv_term_evt+0x17b/0x730
Protect the instance lookup and payload construction in the extended
advertising, scan response, and periodic advertising data paths. Snapshot
the advertising parameters under hdev->lock, but release the lock before
waiting for the controller.
Clear advertising-data dirty bits before issuing their commands and
restore them after a failure using a fresh lookup. Likewise, update the
reported transmit power through a fresh lookup after the parameter command
completes. No adv_info pointer then survives an HCI command wait.
Fixes: cba6b75871 ("Bluetooth: hci_sync: Make use of hci_cmd_sync_queue set 2")
Cc: stable@vger.kernel.org
Suggested-by: Luiz Augusto von Dentz <luiz.dentz@gmail.com>
Signed-off-by: Chengfeng Ye <nicoyip.dev@gmail.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit c283e9ada7 ]
xfrm_user_policy() clears the socket dst cache with __sk_dst_reset(),
i.e. the non-atomic __sk_dst_set(sk, NULL): it reads sk_dst_cache with
rcu_dereference_protected(), stores NULL and dst_release()s the old dst.
That is only safe if no other thread modifies sk_dst_cache concurrently.
For a connected UDP socket that does not hold: the transmit fast path
(udp_sendmsg -> sk_dst_check -> sk_dst_reset) resets the cache locklessly
with an atomic xchg(). A per-socket policy change racing a send can make
both sides observe the same old dst and each dst_release() it, dropping
the socket's single reference twice and freeing the xfrm_dst bundle while
it is still referenced:
BUG: KASAN: slab-use-after-free in dst_release
Write of size 4 at addr ffff88801897b6c0 by task exploit/155
Call Trace:
...
dst_release (... ./include/linux/rcuref.h:109)
xfrm_user_policy (./include/net/sock.h:2239 ./include/net/sock.h:2256 net/xfrm/xfrm_state.c:3053)
do_ip_setsockopt (net/ipv4/ip_sockglue.c:1347)
ip_setsockopt (net/ipv4/ip_sockglue.c:1417)
do_sock_setsockopt (net/socket.c:2368)
__sys_setsockopt (net/socket.c:2393)
__x64_sys_setsockopt (net/socket.c:2396)
do_syscall_64 (arch/x86/entry/syscall_64.c:94)
entry_SYSCALL_64_after_hwframe (arch/x86/entry/entry_64.S:121)
Reachable by an unprivileged user via a user+network namespace.
Use the atomic sk_dst_reset() so the cache is cleared and released with a
single xchg(): whichever side wins releases the dst once, the other sees
NULL and does nothing. Behaviour is otherwise unchanged.
Fixes: 2b06cdf3e6 ("xfrm: Clear sk_dst_cache when applying per-socket policy.")
Fixes: be8f8284cd ("net: xfrm: allow clearing socket xfrm policies.")
Reported-by: AutonomousCodeSecurity@microsoft.com
Signed-off-by: Xiang Mei (Microsoft) <xmei5@asu.edu>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
commit a13cdb19fc upstream.
hid_set_field() hands field->usage + offset to hid_dump_input() before
the guard that bounds offset:
hid_dump_input(field->report->device, field->usage + offset, value);
if (offset >= field->report_count) {
hid_err(...);
return -1;
}
Under CONFIG_DEBUG_FS hid_dump_input() dereferences that pointer, with
buf = hid_resolv_usage(usage->hid, NULL). The usage[] array is
allocated inline with the hid_field in hid_register_field() and holds
field->maxusage entries, so an offset past it reads off the end of the
kvzalloc()ed allocation and into a neighbouring object. Had the guard
run first, offset < report_count <= maxusage would already have confined
the pointer to the array.
A caller supplies such an offset today. picolcd_fb_send_tile()
validates only report->maxfield before issuing
hid_set_field(report->field[0], 11 + i, ...) for i = 0..31, so its
offsets are fixed at 11..42 and are never checked against the bound
field. When the device registers that field with fewer usages, the
framebuffer deferred-io work drives the read on every tile. KASAN
reports a 4-byte slab-out-of-bounds read in hid_dump_input() below
hid_set_field(), and the same boot logs "offset (1) exceeds
report_count (1)" from the guard that runs only afterwards.
Move the hid_dump_input() call below the guard. Because
field->maxusage >= field->report_count, the guard then establishes that
field->usage + offset lies inside the array before it is dereferenced,
for every caller and without changing behaviour on the valid path.
Discovered by XBOW, triaged by Baul Lee <baul.lee@xbow.com>
Fixes: 1da177e4c3 ("Linux-2.6.12-rc2")
Reported-by: Federico Kirschbaum <federico.kirschbaum@xbow.com>
Reported-by: Baul Lee <baul.lee@xbow.com>
Cc: stable@vger.kernel.org
Signed-off-by: Baul Lee <baul.lee@xbow.com>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit d93ba918a1 upstream.
It is currently possible for a malicious or misconfigured USB device to
cause an out-of-bounds (OOB) read when submitting reports using
DOUBLE_REPORT_ID by specifying a large report length and providing a
smaller one.
Let's prevent that by comparing the specified report length with the
actual size of the data read in from userspace. If the actual data
length ends up being smaller than specified, we'll politely warn the
user and prevent any further processing.
Signed-off-by: Lee Jones <lee@kernel.org>
Reviewed-by: Günther Noack <gnoack@google.com>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 0af3b89705 upstream.
magicmouse_input_mapping() caches the first hid_input's input_dev in
msc->input while the report descriptor is parsed, and the rest of the
driver treats a non-NULL msc->input as proof that an input device was
registered.
That does not hold on the hid-input error path. If hidinput_connect()
fails -- for instance because input_register_device() returns an error --
it unwinds through hidinput_disconnect(), which frees every input_dev it
created, including the one cached in msc->input.
The failure does not abort the probe. hid_connect() only skips the claim:
if ((connect_mask & HID_CONNECT_HIDINPUT) && !hidinput_connect(hdev,
connect_mask & HID_CONNECT_HIDINPUT_FORCE))
hdev->claimed |= HID_CLAIMED_INPUT;
and the "device has no listeners" bailout below it does not fire for this
driver, which sets ->raw_event; on the USB Magic Mouse 2 / Magic Trackpad
2 paths hidraw and hiddev are claimed as well. hid_hw_start() therefore
returns 0 and magicmouse_probe() continues with msc->input pointing at
freed memory. Being non-NULL, it passes the "input not registered" check
in probe and the NULL checks in ->raw_event and ->event, so the next
input report dereferences freed memory.
Clear msc->input when the HID core did not claim an input device, so the
existing NULL checks cover this case as well.
Fixes: f1a9a149ab ("HID: magicmouse: fix race between input_register() and probe()")
Link: https://lore.kernel.org/linux-input/20260728185542.65F091F000E9@smtp.kernel.org/
Cc: stable@vger.kernel.org
Signed-off-by: Jose Villaseñor Montfort <pepemontfort@gmail.com>
Reviewed-by: Alec Hall <signshop.alec@gmail.com>
Tested-by: Alec Hall <signshop.alec@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit a1556b48ef upstream.
The Apple Magic Trackpad 2 (USB-C) reports a wildly wrong battery
capacity over Bluetooth, for example a constant 4% for a pack that is
actually at 74%.
The device's battery input report (0x90) is laid out as
[report-id][status][charge]. hid-input's synchronous capacity query,
hidinput_query_battery_capacity(), assumes the common
[report-id][capacity] layout and returns buf[1], which for this device
is the status byte rather than the charge (buf[2]).
magicmouse_fetch_battery(), which requests the battery report through
hid_hw_request() so the reply is decoded via the report descriptor at
the correct field offset, is gated to the USB models and never runs
over Bluetooth. The device does not push battery reports on its own
either, except a single one at connect time, which is delivered while
probe holds driver_input_lock and is silently dropped. All userspace
reads therefore go through the misparsing query, and the device is
stuck reporting its status byte as the capacity.
Enabling the fetch for Bluetooth is not sufficient on its own: user
space reacts to the power_supply registration immediately, so a query
is typically already in flight when the fetch reply is parsed.
hidinput_get_battery_property() stores the query result and marks the
battery as queried without rechecking whether a report arrived while
it was waiting, clobbering the just-reported correct value with the
misparsed one.
Fix this by adding HID_BATTERY_QUIRK_AVOID_QUERY for the Bluetooth
Magic Trackpad USB-C so the misparsing query path is never used, and
by fetching the battery at the end of probe for this device. hidp has
no asynchronous request() callback, so the fetch is serviced
synchronously via __hid_request() while probe still holds
driver_input_lock; call hid_device_io_start() first so the reply is
processed instead of being discarded.
Tested with a Magic Trackpad USB-C (004c:0324) over Bluetooth on
6.18.37: the reported capacity now matches the device (verified against
a raw GET_REPORT of report 0x90) and updates on reconnect.
Fixes: 87a2f10395 ("HID: magicmouse: Apple Magic Trackpad 2 USB-C driver support")
Cc: stable@vger.kernel.org
Signed-off-by: Andrei Fed <andfed.net@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit a7aad5b69d ]
The timer callback reads entry->retrans_times outside pm.lock to decide
whether to call mptcp_pm_subflow_established(). Since
mptcp_pm_announced_del_timer() can concurrently set retrans_times =
ADD_ADDR_RETRANS_MAX under pm.lock, a race condition exists.
I discovered this issue while studying the code. AI tools helped me to
verify the issue can potentially happen under race conditions.
Use a local 'retransmit' flag set inside pm.lock to capture whether
retransmission is still possible when the lock is taken. This allows to
call mptcp_pm_subflow_established() accordingly, and not depending on
the situation that can be different when checked outside the pm.lock.
Fixes: 348d5c1dec ("mptcp: move to next addr when timeout")
Cc: stable@vger.kernel.org
Signed-off-by: Qing Luo <luoqing@kylinos.cn>
Reviewed-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://patch.msgid.link/20260803-net-mptcp-misc-fixes-7-2-rc6-v2-4-b8f496d71664@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
[ applied to mptcp_pm_add_timer() in pm_netlink.c instead of pm.c and collapsed the adaptive backoff branch to `if (!retransmit) timeout = 0;` since the tree lacks exponential ADD_ADDR retransmission timeouts ]
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 1ba381759e ]
The "DEC0 MODE" to "DEC7 MODE" controls are enumerated, but
tx_macro_dec_mode_get() and tx_macro_dec_mode_put() access their
value through ucontrol->value.integer.value[0] (a long) instead of
ucontrol->value.enumerated.item[0] (an unsigned int).
This same pattern was fixed in the sibling drivers by
commit bcfe5f76cc ("ASoC: codecs: rx-macro: fix accessing array
out of bounds for enum type") and
commit 0ea5eff7c6 ("ASoC: codecs: va-macro: fix accessing array
out of bounds for enum type"), but tx-macro was missed.
On 64-bit kernels built with CONFIG_SND_CTL_DEBUG, the elem value
sanity check catches the 4 bytes written past the enumerated item
and every read of these controls fails with -EINVAL:
snd-sm8250 sound: control 2:0:0:DEC0 MODE:0: access overflow
Fixes: c39667ddcf ("ASoC: codecs: lpass-tx-macro: add support for lpass tx macro")
Assisted-by: Claude:claude-fable-5
Cc: stable@vger.kernel.org
Signed-off-by: Dawid Wróbel <me@dawidwrobel.com>
Reviewed-by: Srinivas Kandagatla <srinivas.kandagatla@oss.qualcomm.com>
Link: https://patch.msgid.link/20260730-worktree-lpass-tx-macro-enum-fix-v2-1-6d091c736116@dawidwrobel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
[ kept `snd_soc_kcontrol_component()` context line instead of upstream's renamed `snd_kcontrol_chip()` ]
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 17661c67b2 ]
Ignore IPC errors for pipeline state change if the firmware state is
crashed or the IPC has timed out.
If the firmware has crashed the kernel still needs to go through the state
changes to reset its internal to be able to correctly work the next time
the DSP is booted up.
The case with IPC timeout is a bit more problematic, but it has been
rootcaused to be the result of system scheduling blockage and the firmware
did actually received and handled the message, but the reply handling got
blocked by issues outside of the SOF stack.
So far the best way to handle this is to continue with setting the state.
Fixes: c40aad7c81 ("ASoC: SOF: ipc4-pcm: Workaround for crashed firmware on system suspend")
Cc: stable@vger.kernel.org
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Link: https://patch.msgid.link/20260730112343.26687-1-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cristian Ciocaltea
Sasha Levin
Michael Neuling
Jiayuan Chen
Kuniyuki Iwashima
Oliver Upton
Tetsuo Handa
Vladimir Riabchun
Wentao Liang
Namjae Jeon
Dylan Wolff
Nick Child
Vasiliy Kovalev
Sebastian Andrzej Siewior
Kyle Zeng
Tao Lyu
Ralf Lici
Vishnu Razdan
Eric Biggers
Jinu Kim
Peiyang He
Greg Kroah-Hartman
Xinyang Ge
Eric Dumazet
Laxman Acharya Padhya
Chengfeng Ye
Michael Bommarito
Haoxiang Li
Jann Horn
Ibrahim Hashimov
Shardul Bankar
Donglin Lyu
Cryolitia PukNgae
Xiang Mei (Microsoft)
Baul Lee
Lee Jones
Jose Villaseñor Montfort
Andrei Fed
Qing Luo
Dawid Wróbel
Peter Ujfalusi