fec_enet_alloc_rxq_buffers() leaves the loop as soon as
page_pool_dev_alloc_pages() returns NULL and jumps to err_alloc, which
calls fec_enet_free_buffers(). That helper walks the whole ring and
hands every rx_skb_info[i].page to page_pool_put_full_page(), including
the entries the allocation loop never reached. Those are still NULL,
because the queue was allocated with kzalloc(), and
page_pool_put_full_page() dereferences the page, so an open that runs
out of memory oopses instead of returning -ENOMEM:
Unable to handle kernel NULL pointer dereference at virtual address 00000014 when read
Internal error: Oops: 5 [#1] SMP ARM
CPU: 0 PID: 384 Comm: connmand Not tainted 6.18.43 #1
Hardware name: Freescale Vybrid VF5xx/VF6xx (Device Tree)
PC is at fec_enet_free_buffers+0xb0/0x2a8
Call trace:
fec_enet_free_buffers from fec_enet_open+0x1e0/0x504
fec_enet_open from __dev_open+0x114/0x238
__dev_open from __dev_change_flags+0x190/0x208
__dev_change_flags from netif_change_flags+0x1c/0x58
netif_change_flags from dev_change_flags+0x44/0x74
dev_change_flags from devinet_ioctl+0x3a4/0x768
Seen on a Colibri VF50, 128 MiB of RAM, on the first ifup after boot.
Skip the entries that hold no page, and clear the ones that do after
releasing them, so that a later failed open cannot release the same page
a second time.
Mainline is not affected. Commit a2ae70c0ef ("net: fec: add
fec_alloc_rxq_buffers_pp() to allocate buffers from page pool") replaced
this loop with fec_free_rxq_buffers(), which skips and clears the empty
entries. That commit is part of the XDP zero copy series and is not a
stable candidate, so this is the equivalent minimal fix for 6.18.y.
Fixes: 95698ff617 ("net: fec: using page pool to manage RX buffers")
Cc: stable@vger.kernel.org
Signed-off-by: Mehmet Fide <mehmet.fide@screeningeagle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit fddb5ceaf9 ]
The driver currently has two issues with the external VREF regulator
handling in ads7828_probe():
1. All errors from devm_regulator_get_optional() are ignored, causing the
driver to incorrectly fall back to internal VREF even for transient
errors like -EPROBE_DEFER or genuine failures like -ENOMEM.
2. The external regulator is never enabled. The driver calls
regulator_get_voltage() without first calling regulator_enable(),
so the VREF pin may remain unpowered if the regulator is not
configured as always-on.
Fix both issues by switching to devm_regulator_get_enable_read_voltage(),
which handles regulator get, enable, and voltage read in one call.
Only -ENODEV (no regulator specified in device tree) should trigger the
fallback to internal VREF. All other errors are propagated to the caller.
Fixes: a8ddfea095 ("hwmon: (ads7828) Accept optional parameters from device tree")
Signed-off-by: Qingshuang Fu <fuqingshuang@kylinos.cn>
Link: https://lore.kernel.org/r/20260805061645.1331652-1-fffsqian@163.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 36c4d73ce0 ]
In theory it could be possible that the REPLY_SIZE sized buffers for
holding the vendor and product strings could be end up missing the null
termination (for example by malicious hardware built on purpose)
required by the seq_printf() call. That limits the debugfs printf calls
to a maximum string length of REPLY_SIZE.
Fixes: d115b51e0e ("hwmon: add Corsair PSU HID controller driver")
Signed-off-by: Wilken Gottwalt <wilken.gottwalt@posteo.net>
Link: https://lore.kernel.org/r/anLj9gPWRoRDbQBV@monster.localdomain
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit af0e5cdd03 ]
When a signal interrupts a blocking send, tls_tx_records() treats the
resulting -ERESTARTSYS as a transmission failure and marks the socket
errored via tls_err_abort() with the raw error code. Later syscalls
return the kernel-internal errno 512 (ERESTARTSYS) to userspace, as the
signal it stems from is no longer pending during syscall exit and thus
never translated.
An interrupted send is not a connection error: the partially sent record
stays queued and is resent later. Interrupt error codes are therefore
excluded from the abort in the same way as -EAGAIN.
Fixes: b341ca51d2 ("tls: Fix tls_sw_sendmsg error handling")
Signed-off-by: Maximilian Immanuel Brandtner <maxbr@linux.ibm.com>
Link: https://patch.msgid.link/20260805063109.1772314-1-maxbr@linux.ibm.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit c9158ceaf2 ]
sctp_make_heartbeat_ack() caches the destination transport in
chunk->transport without taking a reference. When src_out_of_asoc_ok is
enabled, the HEARTBEAT ACK may remain queued on control_chunk_list instead
of being transmitted immediately.
If the peer transport is removed while the chunk is still queued,
sctp_assoc_rm_peer() drops the transport and schedules it for RCU freeing,
but only clears cached transport pointers in out_chunk_list. The queued
control chunk therefore retains a dangling transport pointer.
Once an ASCONF_ACK clears the suppression and the queued control chunk is
transmitted, SCTP dereferences the stale transport pointer, leading to a
use-after-free.
Fix this by also clearing chunk->transport for queued control chunks in
control_chunk_list when removing the transport.
Fixes: 8a07eb0a50 ("sctp: Add ASCONF operation on the single-homed host")
Reported-by: Daniele Linguaglossa <danielelinguaglossa@gmail.com>
Signed-off-by: Xin Long <lucien.xin@gmail.com>
Link: https://patch.msgid.link/7e1168cb722132152a29d47e5eafaeac4a3bf6f3.1785943120.git.lucien.xin@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit d0c80dbb97 ]
vcc_setsockopt() contained an ineffective optlen check:
if (__SO_LEVEL_MATCH(optname, level) && optlen != __SO_SIZE(optname))
return -EINVAL;
If __SO_LEVEL_MATCH(optname, level) evaluated to false (e.g. if the caller
passed a mismatched level), the length check optlen != __SO_SIZE(optname)
was short-circuited and bypassed. Execution then fell through to switch(optname),
calling copy_from_sockptr() assuming optval contained sufficient space.
Furthermore, even if level matched, a cgroup BPF setsockopt filter could shrink
optlen after entry. Because copy_from_sockptr() on kernel pointers uses memcpy(),
this leads to a KASAN slab-out-of-bounds read when optlen is smaller than the
expected structure size.
Fix this by using copy_safe_from_sockptr(), which unconditionally validates
that optlen is at least the expected size before copying. Also change the local
'value' variable type from 'unsigned long' to 'int' so that SO_SETCLP matches
its sizeof(int) ABI encoding on 64-bit systems.
Fixes: 1da177e4c3 ("Linux-2.6.12-rc2")
Reported-by: syzbot+53ecc09fb81df10ef4de@syzkaller.appspotmail.com
Closes: https://syzkaller.appspot.com/bug?extid=53ecc09fb81df10ef4de
Signed-off-by: Eric Dumazet <edumazet@google.com>
Link: https://patch.msgid.link/20260805131508.3227331-1-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 8c73b26315 ]
TCP-AO, similarly to TCP-MD5, needs to allocate tfms on a slow-path,
which is setsockopt() and use crypto ahash requests on fast paths,
which are RX/TX softirqs. Also, it needs a temporary/scratch buffer
for preparing the hash.
Rework tcp_md5sig_pool in order to support other hashing algorithms
than MD5. It will make it possible to share pre-allocated crypto_ahash
descriptors and scratch area between all TCP hash users.
Internally tcp_sigpool calls crypto_clone_ahash() API over pre-allocated
crypto ahash tfm. Kudos to Herbert, who provided this new crypto API.
I was a little concerned over GFP_ATOMIC allocations of ahash and
crypto_request in RX/TX (see tcp_sigpool_start()), so I benchmarked both
"backends" with different algorithms, using patched version of iperf3[2].
On my laptop with i7-7600U @ 2.80GHz:
clone-tfm per-CPU-requests
TCP-MD5 2.25 Gbits/sec 2.30 Gbits/sec
TCP-AO(hmac(sha1)) 2.53 Gbits/sec 2.54 Gbits/sec
TCP-AO(hmac(sha512)) 1.67 Gbits/sec 1.64 Gbits/sec
TCP-AO(hmac(sha384)) 1.77 Gbits/sec 1.80 Gbits/sec
TCP-AO(hmac(sha224)) 1.29 Gbits/sec 1.30 Gbits/sec
TCP-AO(hmac(sha3-512)) 481 Mbits/sec 480 Mbits/sec
TCP-AO(hmac(md5)) 2.07 Gbits/sec 2.12 Gbits/sec
TCP-AO(hmac(rmd160)) 1.01 Gbits/sec 995 Mbits/sec
TCP-AO(cmac(aes128)) [not supporetd yet] 2.11 Gbits/sec
So, it seems that my concerns don't have strong grounds and per-CPU
crypto_request allocation can be dropped/removed from tcp_sigpool once
ciphers get crypto_clone_ahash() support.
[1]: https://lore.kernel.org/all/ZDefxOq6Ax0JeTRH@gondor.apana.org.au/T/#u
[2]: https://github.com/0x7f454c46/iperf/tree/tcp-md5-ao
Signed-off-by: Dmitry Safonov <dima@arista.com>
Reviewed-by: Steen Hegelund <Steen.Hegelund@microchip.com>
Acked-by: David Ahern <dsahern@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Stable-dep-of: d0c80dbb97 ("net/atm: fix slab-out-of-bounds read in vcc_setsockopt()")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 7700a31039 ]
pci_get_slot() returns a referenced PCI device. Commit 44c10138fd
("PCI: Change all drivers to use pci_device->revision") replaced a
configuration-space read with direct access to the cached revision field,
but left that access after pci_dev_put(). The bridge may therefore be freed
before its revision is read.
Read the revision before dropping the reference.
Fixes: 44c10138fd ("PCI: Change all drivers to use pci_device->revision")
Signed-off-by: Hongyan Xu <getshell@seu.edu.cn>
Reviewed-by: Niklas Cassel <cassel@kernel.org>
Signed-off-by: Damien Le Moal <dlemoal@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 68bf02b6b4 ]
tbnet_tear_down() stops both rings and frees their frame buffers before
calling tb_xdomain_disable_paths(). tb_ring_stop() zeroes the ring's
descriptor base and tbnet_free_buffers() unmaps and frees the pages the
frames sit in, so by the time __tb_path_deactivate_hop() polls the hop's
'pending' bit, anything still in flight has nowhere to drain to.
The teardown sequence has been in this order since the driver was added.
The setup path has not: commit ff7cd07f30 ("net: thunderbolt: Enable
DMA paths only after rings are enabled") moved the path enable to the end
of tbnet_connected_work() and documented why:
/* Both logins successful so enable the rings, high-speed DMA
* paths and start the network device queue.
*
* Note we enable the DMA paths last to make sure we have primed
* the Rx ring before any incoming packets are allowed to
* arrive.
*/
Teardown was never updated to match, so the rings and the paths now come
down in the same order they go up instead of in reverse.
On an ASMedia ASM4242 host router the 'pending' bit then never clears:
every teardown burns the full 500 ms timeout and
__tb_path_deactivate_hop() returns -ETIMEDOUT. Raising the timeout to
5 s does not help, so the hop is not slow to drain, it never drains
at all.
The failure is invisible above the thunderbolt core.
__tb_path_deactivate_hops() is void and only calls tb_port_warn();
tb_path_deactivate(), tb_tunnel_deactivate() and
__tb_disconnect_xdomain_paths() are void as well, and
tb_disconnect_xdomain_paths() ends in an unconditional "return 0". So
tb_xdomain_disable_paths() reports success and the netdev_warn() below
it never fires. Repeated teardowns eventually take the XDomain control
channel down, after which the peer node is gone and only a power cycle
brings the controller back.
Deactivating the paths first fixes it. Measured with kretprobes on a
stock v6.17 tree with no other patches applied, on a link that was up
and had just carried traffic:
before: __tb_path_deactivate_hop() returns 0 for the first hop, then
-ETIMEDOUT for the second 500335 us later
after: 0 for both, 525 us apart
Alternating the two orderings ABBA over three load levels, four
teardowns per arm: every teardown failed before the change (21 of 21
that ran), none failed after (0 of 24). The before arms ran short
because the link died partway through. The same split shows up when
the interface is enslaved to a bond instead of just brought down, which
is how I ran into this in the first place. Throughput and latency after
the change are unchanged.
Hosts whose routers drain the hop despite the stale descriptor base see
no functional difference, since the paths end up deactivated either way.
Fixes: e69b6c02b4 ("net: Add support for networking over Thunderbolt cable")
Signed-off-by: Fan XinRan <shinjiangjiang@gmail.com>
Acked-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Link: https://patch.msgid.link/20260803-b4-tbnet-teardown-v2-1-27de6a13ca2d@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 185a4caeec ]
smc_listen_out() reads lsmc->sk.sk_state without the listener lock,
then acquires lock_sock_nested() only after the check passes. This
opens a window where smc_close_active() can transition the listener
to SMC_CLOSED, call smc_close_cleanup_listen() to drain the accept
queue, and release the lock, all between the lockless read and the
delayed lock acquisition:
smc_listen_work (smc_hs_wq) smc_close_active()
------------------------------- -------------------------
release_sock(child)
if (sk_state == SMC_LISTEN) TRUE
lock_sock(listener)
sk_state = SMC_CLOSED
smc_close_cleanup_listen()
release_sock(listener)
flush_work(tcp_listen_work)
lock_sock_nested(listener)
smc_accept_enqueue(listener, child) /* child enqueued on dead listener */
smc_close_active() flushes only tcp_listen_work. Work items already
dispatched onto smc_hs_wq for the CLC handshake continue running
unguarded. smc_accept_enqueue() takes a sock_hold() on the child that
is never released, so the child smc_sock, its clcsock, and the
reference all leak. A remote peer that opens TCP connections while the
server calls close() can exhaust kernel memory.
Move lock_sock_nested() to before the sk_state check so that the test
and the enqueue are atomic under the listener lock.
Fixes: fd57770dd1 ("net/smc: wait for pending work before clcsock release_sock")
Reviewed-by: Mahanta Jambigi <mjambigi@linux.ibm.com>
Signed-off-by: Sidraya Jayagond <sidraya@linux.ibm.com>
Reviewed-by: Breno Leitao <leitao@debian.org>
Reviewed-by: Dust Li <dust.li@linux.alibaba.com>
Link: https://patch.msgid.link/20260803070701.126339-1-sidraya@linux.ibm.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit afa58b7384 ]
ncsi_send_cmd_nl() takes the number of bytes to copy from the
attacker-controlled ncsi_pkt_hdr.length field of the in-band packet
header, while the source buffer is the NCSI_ATTR_DATA netlink
attribute whose readable size is nla_len() - sizeof(ncsi_pkt_hdr).
The two length sources are never cross-checked: only
nla_len() >= sizeof(struct ncsi_pkt_hdr) is enforced.
With hdr->length set larger than the attribute payload (up to 65535
against at most 2032 readable bytes), ncsi_cmd_handler_oem() copies
past the end of the netlink attribute buffer with unsafe_memcpy(),
leaking up to ~64KB of kernel heap memory into the transmitted NCSI
command packet. The destination skb is sized by the declared payload,
so the write side does not overflow - this is a pure OOB read /
information leak, reachable with CAP_NET_ADMIN on systems with a
registered NCSI device (e.g. OpenBMC on Aspeed BMC SoCs, where
NET_NCSI=y is standard).
Reject commands whose declared payload extends past the end of the
data attribute.
The issue was found by the autokbug dynamic kernel fuzzer at Tencent
Yunding Lab.
Fixes: 9771b8ccdf ("net/ncsi: Extend NC-SI Netlink interface to allow user space to send NC-SI command")
Reported-by: Henry Martin <bsdhenrymartin@gmail.com>
Signed-off-by: Henry Martin <bsdhenrymartin@gmail.com>
Link: https://patch.msgid.link/20260803043618.3210301-1-bsdhenrymartin@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit a0ab2ba83e ]
A listener's TCP_FASTOPEN max_qlen stops being accurate and lets through
far more pending Fast Open requests than it was configured for.
This only shows up with SO_REUSEPORT listener migration, where closing a
listener hands its still-pending TFO children over to a surviving one.
fastopenq.qlen is charged in tcp_fastopen_create_child() when the child
is created and uncharged in reqsk_fastopen_remove() when the handshake
completes. The uncharge follows rsk_listener of the request the child
points at, and inet_reqsk_clone() has repointed the child at a new
request owned by the new listener, so the ++ and the -- land on two
different sockets. The new listener's qlen drifts negative and its
limit no longer binds.
Charge the new listener during migration, like reqsk_queue_migrated()
already does for queue->young and queue->qlen.
Fixes: 54b92e8419 ("tcp: Migrate TCP_ESTABLISHED/TCP_SYN_RECV sockets in accept queues.")
Signed-off-by: Jiayuan Chen <jiayuan.chen@linux.dev>
Reviewed-by: Kuniyuki Iwashima <kuniyu@google.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Link: https://patch.msgid.link/20260803061739.134737-1-jiayuan.chen@linux.dev
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit aa2e13ae8d ]
In sctp_process_asconf(), when sctp_make_asconf_ack() fails to allocate
the ASCONF_ACK chunk due to memory pressure, the code jumps to the
done label where asoc->peer.addip_serial is unconditionally incremented.
This leaves the peer's ASCONF (serial N) unacknowledged while the local
endpoint now expects serial N+1. When the peer retransmits serial N, it
falls into the serial < addip_serial + 1 branch ,
which attempts to look up a cached ACK for serial N. No cached ACK
exists since the allocation failed, so the retransmission is silently
discarded. The peer eventually times out and ABORTs the association.
Move the addip_serial increment inside the if (asconf_ack) block so that
the serial number is only advanced when the ASCONF_ACK is successfully
created and cached. This way, on allocation failure, the serial number
is unchanged and the peer's retransmitted ASCONF will be correctly
re-processed.
Fixes: 1da177e4c3 ("Linux-2.6.12-rc2")
Signed-off-by: Qing Luo <luoqing@kylinos.cn>
Acked-by: Xin Long <lucien.xin@gmail.com>
Link: https://patch.msgid.link/20260804025514.241767-1-l1138897701@163.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 80eaf88efe ]
The existing driver logic is always turning on PTP_CLK_REQ_PPS
regardless of the "on" parameter passed to bnxt_ptp_enable().
During shutdown, PTP_CLK_REQ_PPS may be turned off and this
bug will do the opposite and may trigger a PCIe PTM request TLP.
On some systems this can trigger a PCIe AER.
Fix it by properly configuring PTP_CLK_REQ_PPS based on the "on"
parameter.
Fixes: 9e518f2580 ("bnxt_en: 1PPS functions to configure TSIO pins")
Reviewed-by: Pavan Chebbi <pavan.chebbi@broadcom.com>
Signed-off-by: Keegan Freyhof <keegan.freyhof@broadcom.com>
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Link: https://patch.msgid.link/20260731190937.807270-6-michael.chan@broadcom.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit c3faf548a0 ]
EOP (End of frame padding) on the AGG ring may cause overlapping of
zero padding at the end of one segment with the next segment's data.
If Relaxed Ordering (RO) is enabled, the zero padding may overwrite
valid data in the next segment and corrupt the data. Older chips
(P5 and older) do not automatically disable RO when EOP is enabled.
On some ARM systems, data corruption was reported on 57508 (P5)
chips with RO enabled.
Always disable EOP on all chips on the AGG rings when TPA is enabled
to fix the data corruption.
Fixes: bfcd8d791e ("bnxt_en: Add fast path logic for TPA on 57500 chips.")
Reviewed-by: Pavan Chebbi <pavan.chebbi@broadcom.com>
Reviewed-by: Kalesh AP <kalesh-anakkur.purayil@broadcom.com>
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Link: https://patch.msgid.link/20260731190937.807270-5-michael.chan@broadcom.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 30f253f8d9 ]
With End-of-Packet padding (EOP) set, the chip will disable Relaxed
Ordering (RO) of TPA data packets. A TPA segment with EOP set will be
padded to the next cache boundary and can potentially overwrite the
beginning bytes of the next TPA segment when RO is enabled on 5760X.
To prevent that, the chip disables RO for TPA when EOP is set.
To take advantge of RO and higher performance, do not set EOP on
5760X chips when TPA is enabled. Define a proper RX_BD_FLAGS_AGG_EOP
constant to make it clear that we are setting EOP.
Reviewed-by: Andy Gospodarek <andrew.gospodarek@broadcom.com>
Reviewed-by: Somnath Kotur <somnath.kotur@broadcom.com>
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Link: https://patch.msgid.link/20251126215648.1885936-6-michael.chan@broadcom.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Stable-dep-of: c3faf548a0 ("bnxt_en: Disable EOP for TPA on all chips to prevent data corruption")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 6e3abef2a2 ]
The add/remove eprobe test installs an eprobe for the openat syscall and
runs ls. It checks the filenames that were opened by ls against a
whitelist and a blacklist.
Commit 206b25c090 ("tracing: eprobe: read the complete FILTER_PTR_STRING
pointer") fixed access to some string fields in eprobes. This triggers
test failures as the blacklist does not allow relative paths for the
openat parameters.
What makes this test unstable is the fact that the openat calls vary a
lot between different systems.
Refactor the test to make it more robust. "cd <directory>" will issue a
chdir syscall with the target directory as parameter. Set an eprobe on
the sys_enter_chdir event and filter for the exact directory name. Allow
(fault) as fallback.
Link: https://lore.kernel.org/all/20260804194705.760893-1-martin@kaiser.cx/
Fixes: 206b25c090 ("tracing: eprobe: read the complete FILTER_PTR_STRING pointer")
Reported-by: kernel test robot <oliver.sang@intel.com>
Closes: https://lore.kernel.org/oe-lkp/202607151010.b68428e1-lkp@intel.com
Signed-off-by: Martin Kaiser <martin@kaiser.cx>
Signed-off-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 0dabe8a56f ]
In lm25066_probe(), the PMBus coefficients for current and power are
scaled based on the shunt resistor value. The calculation evaluates the
multiplication using 32-bit arithmetic because info->m is an int and
shunt is a u32:
static int lm25066_probe(struct i2c_client *client) {
...
info->m[PSC_CURRENT_IN] = info->m[PSC_CURRENT_IN] * shunt / 1000;
info->m[PSC_POWER] = info->m[PSC_POWER] * shunt / 1000;
...
}
For large coefficients like 26882 (LM25056) or 15076 (LM5066i), a device
tree shunt-resistor-micro-ohms value exceeding approximately 159,000
(159 mOhm, which is physically valid for low-current applications) causes
the intermediate product to exceed UINT_MAX (4,294,967,295). This results
in a silent wraparound before the division by 1000.
Furthermore, if the wrapped value has the most significant bit set,
converting it back to the signed int info->m results in negative
coefficients. This logic error leads to drastically corrupted current and
power readings, which can cause erratic thermal or power management
behavior in the system.
Fix the problem by using 64-bit operations for the multiply/divide
operations. This can still overflow, but only for unreasonably large
shunt resistor values.
Reported-by: Sashiko <sashiko-bot@kernel.org>
Fixes: 94ee5fcc24 ("hwmon: (pmbus/lm25066) Support configurable sense resistor values")
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit ac0c26bae6 ]
Use preferred i2c_get_match_data() instead of of_match_device() and
i2c_match_id() to get the driver match data. With this, adjust the
includes to explicitly include the correct headers.
Adjust the 'chips' enum to not use 0, so that no match data can be
distinguished from a valid enum value.
Signed-off-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20231115205703.3730448-3-robh@kernel.org
[groeck: Use double cast for enum chips assignment to make compiler happy]
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Stable-dep-of: 0dabe8a56f ("hwmon: (pmbus/lm25066) Fix PMBus coefficient calculations")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit d533882ce1 ]
The init_device() call in nzxt_smart2_hid_probe() can fail because it
sends HID output reports to the hardware to detect fans and set the
update interval. If the hardware is not responding or the HID reports
fail, init_device() returns a negative error code.
However, the return value was ignored, causing the probe to continue
and register an hwmon device even though the device was never properly
initialized. This leads to an inconsistent state where the driver
reports stale data or blocks on wait queues that will never be woken.
The same function's return value is already checked in the
reset_resume() handler, confirming the author's intent that errors
should be propagated.
Note that this fix was not possible before commit 59d104b54b
("hwmon: (nzxt-smart2) Stop device IO before calling hid_hw_stop")
because the out_hw_close error path was missing hid_device_io_stop(),
which would have opened a use-after-free risk window.
Fixes: 53e68c20ae ("hwmon: add driver for NZXT RGB&Fan Controller/Smart Device v2.")
Signed-off-by: Qingshuang Fu <fuqingshuang@kylinos.cn>
Link: https://lore.kernel.org/r/20260804074842.505923-1-fffsqian@163.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit a347304b2c ]
Another challenge with unlocked filters.
There is a short window in tc_new_tfilter where a tcf_proto can be found
and briefly referenced by a totally unrelated, unlocked classifier's request
and cause a race.
Feng created a poc which created this race with two threads, one creating a
u32 filter and other a flower filter in the same chain/prio:
1. Both threads enter tc_new_tfilter, both find the chain empty, both
drop filter_chain_lock
2. u32 finishes tcf_proto_create("u32") first, calls
tcf_chain_tp_insert_unique() -> inserts u32_tp into the chain
3. flower finishes tcf_proto_create("flower") later, calls
tcf_chain_tp_insert_unique() -> tcf_chain_tp_find() now sees u32_tp
already there, takes a reference on it, destroys flower's own tp_new
and returns u32_tp to the caller.
Flower then hits the kind mismatch check (because it requested for kind
"flower" but tp->ops->kind is "u32") and goes through the errout path
which calls tcf_proto_put() on u32_tp. If the u32 thread has already
gone through its own errout (its change() call failed on the PoC's empty
options) and dropped its create and insert refs, flower's put is the
last one and drops u32_tp's refcnt to zero.
At this point tp->ops->destroy() runs in a context that never took
rtnl_lock. When that happens, it might cause a UAF like the following
(illustrated by the PoC):
[ +0.000710] BUG: KASAN: slab-use-after-free in u32_init (net/sched/cls_u32.c:393)
[ +0.000281] Read of size 8 at addr ffff888120022f00 by task poc_feng_xue/524
Call Trace:
u32_init (net/sched/cls_u32.c:393)
tc_new_tfilter (net/sched/cls_api.c:2378)
Allocated by task 526:
u32_init (net/sched/cls_u32.c:378)
tc_new_tfilter (net/sched/cls_api.c:2378)
Freed by task 522:
kfree
u32_destroy (net/sched/cls_u32.c:662)
tcf_proto_destroy (net/sched/cls_api.c:446)
tcf_proto_put (net/sched/cls_api.c:459)
tc_new_tfilter (net/sched/cls_api.c:2459)
Fix this by having tcf_proto_destroy() take rtnl_lock around
tp->ops->destroy() for locked classifiers whenever rtnl is not held.
To explain why I used a temp variable "not_lockless" I'd like to point to a
semi-related note on rtnl_held vs TCF_PROTO_OPS_DOIT_UNLOCKED (adding here
for future cleanup if deemed necessary):
The rtnl_held parameter and the TCF_PROTO_OPS_DOIT_UNLOCKED flag are
redundant sources of truth for whether rtnl_lock is held. Among the nine
classifier destroy(..rtnl_held..) callbacks, only flower consults the
rtnl_held parameter which it propagates to tc_setup_cb_destroy()
and tc_setup_cb_call(). The other eight (u32, flow, bpf, cgroup, route, basic,
fw, mall) ignore it entirely;-> those that call tc_setup_cb_destroy()
(u32, bpf, mall) hardcode true always instead of forwarding the parameter.
A future cleanup should remove the rtnl_held parameter from the destroy callback
signature entirely and have callers rely solely on their knowledge whether
they are running in an unlocked context.
Fixes: 12db03b65c ("net: sched: extend proto ops to support unlocked classifiers")
Reported-by: Feng Xue <feng.xue@outlook.com>
Tested-by: Victor Nogueira <victor@mojatatu.com>
Signed-off-by: Jamal Hadi Salim <jhs@mojatatu.com>
Link: https://patch.msgid.link/20260801125632.360365-1-jhs@mojatatu.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit a12c76a033 ]
This patch addresses issues with filter counting in block (tcf_block),
particularly for software bypass scenarios, by introducing a more
accurate mechanism using useswcnt.
Previously, filtercnt and skipswcnt were introduced by:
Commit 2081fd3445 ("net: sched: cls_api: add filter counter") and
Commit f631ef39d8 ("net: sched: cls_api: add skip_sw counter")
filtercnt tracked all tp (tcf_proto) objects added to a block, and
skipswcnt counted tp objects with the skipsw attribute set.
The problem is: a single tp can contain multiple filters, some with skipsw
and others without. The current implementation fails in the case:
When the first filter in a tp has skipsw, both skipswcnt and filtercnt
are incremented, then adding a second filter without skipsw to the same
tp does not modify these counters because tp->counted is already set.
This results in bypass software behavior based solely on skipswcnt
equaling filtercnt, even when the block includes filters without
skipsw. Consequently, filters without skipsw are inadvertently bypassed.
To address this, the patch introduces useswcnt in block to explicitly count
tp objects containing at least one filter without skipsw. Key changes
include:
Whenever a filter without skipsw is added, its tp is marked with usesw
and counted in useswcnt. tc_run() now uses useswcnt to determine software
bypass, eliminating reliance on filtercnt and skipswcnt.
This refined approach prevents software bypass for blocks containing
mixed filters, ensuring correct behavior in tc_run().
Additionally, as atomic operations on useswcnt ensure thread safety and
tp->lock guards access to tp->usesw and tp->counted, the broader lock
down_write(&block->cb_lock) is no longer required in tc_new_tfilter(),
and this resolves a performance regression caused by the filter counting
mechanism during parallel filter insertions.
The improvement can be demonstrated using the following script:
# cat insert_tc_rules.sh
tc qdisc add dev ens1f0np0 ingress
for i in $(seq 16); do
taskset -c $i tc -b rules_$i.txt &
done
wait
Each of rules_$i.txt files above includes 100000 tc filter rules to a
mlx5 driver NIC ens1f0np0.
Without this patch:
# time sh insert_tc_rules.sh
real 0m50.780s
user 0m23.556s
sys 4m13.032s
With this patch:
# time sh insert_tc_rules.sh
real 0m17.718s
user 0m7.807s
sys 3m45.050s
Fixes: 047f340b36 ("net: sched: make skip_sw actually skip software")
Reported-by: Shuang Li <shuali@redhat.com>
Signed-off-by: Xin Long <lucien.xin@gmail.com>
Acked-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com>
Reviewed-by: Asbjørn Sloth Tønnesen <ast@fiberby.net>
Tested-by: Asbjørn Sloth Tønnesen <ast@fiberby.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
Stable-dep-of: a347304b2c ("net/sched: cls_api: Always acquire rtnl_lock when destroying locked classifiers")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 047f340b36 ]
TC filters come in 3 variants:
- no flag (try to process in hardware, but fallback to software))
- skip_hw (do not process filter by hardware)
- skip_sw (do not process filter by software)
However skip_sw is implemented so that the skip_sw
flag can first be checked, after it has been matched.
IMHO it's common when using skip_sw, to use it on all rules.
So if all filters in a block is skip_sw filters, then
we can bail early, we can thus avoid having to match
the filters, just to check for the skip_sw flag.
This patch adds a bypass, for when only TC skip_sw rules
are used. The bypass is guarded by a static key, to avoid
harming other workloads.
There are 3 ways that a packet from a skip_sw ruleset, can
end up in the kernel path. Although the send packets to a
non-existent chain way is only improved a few percents, then
I believe it's worth optimizing the trap and fall-though
use-cases.
+----------------------------+--------+--------+--------+
| Test description | Pre- | Post- | Rel. |
| | kpps | kpps | chg. |
+----------------------------+--------+--------+--------+
| basic forwarding + notrack | 3589.3 | 3587.9 | 1.00x |
| switch to eswitch mode | 3081.8 | 3094.7 | 1.00x |
| add ingress qdisc | 3042.9 | 3063.6 | 1.01x |
| tc forward in hw / skip_sw |37024.7 |37028.4 | 1.00x |
| tc forward in sw / skip_hw | 3245.0 | 3245.3 | 1.00x |
+----------------------------+--------+--------+--------+
| tests with only skip_sw rules below: |
+----------------------------+--------+--------+--------+
| 1 non-matching rule | 2694.7 | 3058.7 | 1.14x |
| 1 n-m rule, match trap | 2611.2 | 3323.1 | 1.27x |
| 1 n-m rule, goto non-chain | 2886.8 | 2945.9 | 1.02x |
| 5 non-matching rules | 1958.2 | 3061.3 | 1.56x |
| 5 n-m rules, match trap | 1911.9 | 3327.0 | 1.74x |
| 5 n-m rules, goto non-chain| 2883.1 | 2947.5 | 1.02x |
| 10 non-matching rules | 1466.3 | 3062.8 | 2.09x |
| 10 n-m rules, match trap | 1444.3 | 3317.9 | 2.30x |
| 10 n-m rules,goto non-chain| 2883.1 | 2939.5 | 1.02x |
| 25 non-matching rules | 838.5 | 3058.9 | 3.65x |
| 25 n-m rules, match trap | 824.5 | 3323.0 | 4.03x |
| 25 n-m rules,goto non-chain| 2875.8 | 2944.7 | 1.02x |
| 50 non-matching rules | 488.1 | 3054.7 | 6.26x |
| 50 n-m rules, match trap | 484.9 | 3318.5 | 6.84x |
| 50 n-m rules,goto non-chain| 2884.1 | 2939.7 | 1.02x |
+----------------------------+--------+--------+--------+
perf top (25 n-m skip_sw rules - pre patch):
20.39% [kernel] [k] __skb_flow_dissect
16.43% [kernel] [k] rhashtable_jhash2
10.58% [kernel] [k] fl_classify
10.23% [kernel] [k] fl_mask_lookup
4.79% [kernel] [k] memset_orig
2.58% [kernel] [k] tcf_classify
1.47% [kernel] [k] __x86_indirect_thunk_rax
1.42% [kernel] [k] __dev_queue_xmit
1.36% [kernel] [k] nft_do_chain
1.21% [kernel] [k] __rcu_read_lock
perf top (25 n-m skip_sw rules - post patch):
5.12% [kernel] [k] __dev_queue_xmit
4.77% [kernel] [k] nft_do_chain
3.65% [kernel] [k] dev_gro_receive
3.41% [kernel] [k] check_preemption_disabled
3.14% [kernel] [k] mlx5e_skb_from_cqe_mpwrq_nonlinear
2.88% [kernel] [k] __netif_receive_skb_core.constprop.0
2.49% [kernel] [k] mlx5e_xmit
2.15% [kernel] [k] ip_forward
1.95% [kernel] [k] mlx5e_tc_restore_tunnel
1.92% [kernel] [k] vlan_gro_receive
Test setup:
DUT: Intel Xeon D-1518 (2.20GHz) w/ Nvidia/Mellanox ConnectX-6 Dx 2x100G
Data rate measured on switch (Extreme X690), and DUT connected as
a router on a stick, with pktgen and pktsink as VLANs.
Pktgen-dpdk was in range 36.6-37.7 Mpps 64B packets across all tests.
Full test data at https://files.fiberby.net/ast/2024/tc_skip_sw/v2_tests/
Signed-off-by: Asbjørn Sloth Tønnesen <ast@fiberby.net>
Reviewed-by: Simon Horman <horms@kernel.org>
Reviewed-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Stable-dep-of: a347304b2c ("net/sched: cls_api: Always acquire rtnl_lock when destroying locked classifiers")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 2081fd3445 ]
Maintain a count of filters per block.
Counter updates are protected by cb_lock, which is
also used to protect the offload counters.
Signed-off-by: Asbjørn Sloth Tønnesen <ast@fiberby.net>
Reviewed-by: Simon Horman <horms@kernel.org>
Reviewed-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Stable-dep-of: a347304b2c ("net/sched: cls_api: Always acquire rtnl_lock when destroying locked classifiers")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit f631ef39d8 ]
Maintain a count of skip_sw filters.
This counter is protected by the cb_lock, and is updated
at the same time as offloadcnt.
Signed-off-by: Asbjørn Sloth Tønnesen <ast@fiberby.net>
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Reviewed-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Stable-dep-of: a347304b2c ("net/sched: cls_api: Always acquire rtnl_lock when destroying locked classifiers")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit cf6f8b29be ]
When a packet arrives on an ARPHRD_NONE device (e.g. TUN),
ovs_flow_key_extract() trusts the user-provided skb->protocol field: if
it is ETH_P_TEB, the packet is classified as MAC_PROTO_ETHERNET and
key_extract() is called without ensuring the skb has ETH_HLEN (14) bytes
of linear data. key_extract() unconditionally pulls 2 * ETH_ALEN bytes
for MAC addresses and parse_ethertype() pulls 2 more, either of which
triggers a kernel BUG in __skb_pull() when the linear area is too small.
kernel BUG at include/linux/skbuff.h:2848!
RIP: 0010:key_extract+0xa7e/0xd90 net/openvswitch/flow.c:933
ovs_flow_key_extract+0x419/0xa70
ovs_vport_receive+0x222/0x390
netdev_frame_hook+0x3e0/0x630
tun_get_user+0x2d0c/0x38e0
Fixed by calling check_header() in key_extract() before accessing the
Ethernet header.
Fixes: 217ac77a3c ("openvswitch: allow L3 netdev ports")
Reported-by: AutonomousCodeSecurity@microsoft.com
Reviewed-by: Eelco Chaudron <echaudro@redhat.com>
Signed-off-by: Cen Zhang (Microsoft) <blbllhy@gmail.com>
Reviewed-by: Ilya Maximets <i.maximets@ovn.org>
Link: https://patch.msgid.link/20260730222006.118652-1-blbllhy@gmail.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 2a33516f9e ]
The sch_cake ACK filter parses packets to find the TCP header and filter
duplicated ACKs if the flow is backlogged. The parsing code contains a
WARN_ON(1) which can be triggered by a malformed IP header in certain
cases. Depending on the system configuration, this leads either to
either spamming dmesg with warnings, or a panic if panic_on_warn is set.
The code already correctly skips the offending packet in the branch that
triggers the warning, so the WARN_ON itself doesn't really serve any
purpose. So just drop it altogether to avoid the inconvenient side
effects.
Fixes: 8b7138814f ("sch_cake: Add optional ACK filter")
Reported-by: Zhiling Zou <zhilinz@nebusec.ai>
Reported-by: Ren Wei <enjou1224z@gmail.com>
Signed-off-by: Toke Høiland-Jørgensen <toke@toke.dk>
Link: https://patch.msgid.link/20260729191417.45665-1-toke@toke.dk
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit d0f86fb36e ]
__skb_udp_tunnel_segment() gets the UDP header before ensuring the
tunnel header is in the skb head. If the pull reallocates skb->head,
the saved UDP header pointer is no longer valid.
Get the UDP header after the pull to avoid a potential use-after-free.
Fixes: dbef491ebe ("udp: Use uh->len instead of skb->len to compute checksum in segmentation")
Signed-off-by: Xuanqiang Luo <luoxuanqiang@kylinos.cn>
Reviewed-by: Antoine Tenart <atenart@kernel.org>
Link: https://patch.msgid.link/20260730093554.68127-1-xuanqiang.luo@linux.dev
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 0e125ecfe2 ]
Commit f5da7c4518 ("tcp: adjust rcvq_space after updating scaling
ratio") replaced the direct window_clamp update in tcp_measure_rcv_mss()
with a call to tcp_set_window_clamp(), a helper that implements the
TCP_WINDOW_CLAMP setsockopt. As a side effect, the helper also shrinks
rcv_ssthresh via __tcp_adjust_rcv_ssthresh().
As a result, each scaling_ratio decrease detected by
tcp_measure_rcv_mss() also cuts rcv_ssthresh. Elsewhere in TCP,
rcv_ssthresh is usually cut under memory pressure and grows via
tcp_grow_window().
Flows whose segment sizes vary keep scaling_ratio oscillating, which
leads to an unstable rcv_ssthresh: a dip of rcv_ssthresh only recovers
via tcp_grow_window(), keeping the advertised window at a relatively
low level even after the ratio itself has recovered, and can even stall
the sender.
Observed on a customer's proxy gateway after upgrading from kernel 6.1
to 6.12: in the worst case, rcv_ssthresh was cut in half by a
scaling_ratio dip. P99 latency jumped from <10ms on 6.1 to ~100ms on
6.12, and almost returned to the 6.1 level with this patch applied.
Restore the plain WRITE_ONCE() update of window_clamp, as introduced
in commit a2cbb16039 ("tcp: Update window clamping condition"), and
keep the rcvq_space.space adjustment. Now rcv_ssthresh is decoupled from
scaling_ratio changes in tcp_measure_rcv_mss().
Fixes: f5da7c4518 ("tcp: adjust rcvq_space after updating scaling ratio")
Signed-off-by: Nathan Gao <zcgao@amazon.com>
Link: https://patch.msgid.link/20260725030806.28135-1-zcgao@amazon.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 0619aaa34c ]
vhost_vdpa_pa_map() adds the IOVA page offset to the user-controlled map
size before computing the number of pages to pin. On 32-bit systems,
where unsigned long is narrower than u64, that addition can overflow and
the code can pin and map fewer pages than the requested IOTLB range.
Reject sizes that overflow the unsigned long page-count calculation.
Fixes: 22af48cf91 ("vdpa: factor out vhost_vdpa_pa_map() and vhost_vdpa_pa_unmap()")
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Yousef Alhouseen <alhouseenyousef@gmail.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Message-ID: <CAMuQ4bX-iDvcUOPPY+NLz95tkRJYwWqvzAr=U48uNaub_HZLGw@mail.gmail.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit e5fd3f514e ]
reqsk_queue_hash_req() publishes a TCP_NEW_SYN_RECV request_sock onto
the ehash chain, drops the bucket lock, and only afterwards sets
rsk_refcnt to 3.
Lockless readers such as __inet_lookup_established() handle this with
refcount_inc_not_zero(), but bpf_iter_tcp_established_batch() uses plain
sock_hold() while holding the bucket lock, on the assumption that the
lock guarantees sk_refcnt > 0. That assumption does not hold for
request_sock:
CPU 0 CPU 1
----- -----
tcp_conn_request()
reqsk_queue_hash_req()
inet_ehash_insert(req)
spin_lock(bucket)
__sk_nulls_add_node_rcu(req) // rsk_refcnt == 0
spin_unlock(bucket)
bpf_iter_tcp_established_batch()
spin_lock(bucket)
sock_hold(req) <-- addition on 0
spin_unlock(bucket)
refcount_set(&req->rsk_refcnt, 3) // clobbers saturated value
which surfaces as:
refcount_t: addition on 0; use-after-free.
WARNING: lib/refcount.c:25 at refcount_warn_saturate+0x48/0x90, CPU#1
Call Trace:
bpf_iter_tcp_established_batch+0x14e/0x170
bpf_iter_tcp_batch+0x53/0x200
bpf_iter_tcp_seq_next+0x27/0x70
bpf_seq_read+0x107/0x410
vfs_read+0xb9/0x380
The iterator's stolen reference is lost when the publishing CPU's
refcount_set() overwrites the count, leaving the socket one reference
short. When the last legitimate owner drops its reference the reqsk is
freed while still reachable, leading to use-after-free.
This reproduces in seconds with tcp_syncookies=0, a handful of threads
doing connect()/close() to a local listener while others read an
iter/tcp link in a tight loop.
Use refcount_inc_not_zero() and skip the socket on failure. A skipped
socket is still part of the bucket, so keep counting it in expected.
The reallocations are sized from expected, and a request sock whose
refcount gets published while the lock is held across the last realloc
must already have room.
A skipped socket is counted in expected but never batched, so end_sk
can be short of expected on a batch that is actually complete. Decide
completeness by whether the walk left any socket behind instead. The
WARN after the locked realloc checks the same, replacing an
end_sk == expected check that could not hold on that path since
commit cdec67a489 ("bpf: tcp: Make sure iter->batch always
contains a full bucket snapshot").
If every matching socket in a bucket is mid-init (refcount 0), end_sk
stays 0. Advance to the next bucket rather than returning a batch entry
that was never filled this round.
Fixes: 04c7820b77 ("bpf: tcp: Bpf iter batching and lock_sock")
Assisted-by: Claude:unspecified
Signed-off-by: Jose Fernandez (Anthropic) <jose.fernandez@linux.dev>
Reviewed-by: Kuniyuki Iwashima <kuniyu@google.com>
Link: https://lore.kernel.org/bpf/20260730-bpf-iter-tcp-refcnt-v3-1-754b9c8a6717@linux.dev
Signed-off-by: Kumar Kartikeya Dwivedi <memxor@gmail.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit f5080f612a ]
Replace the offset-based approach for tracking progress through a bucket
in the TCP table with one based on socket cookies. Remember the cookies
of unprocessed sockets from the last batch and use this list to
pick up where we left off or, in the case that the next socket
disappears between reads, find the first socket after that point that
still exists in the bucket and resume from there.
This approach guarantees that all sockets that existed when iteration
began and continue to exist throughout will be visited exactly once.
Sockets that are added to the table during iteration may or may not be
seen, but if they are they will be seen exactly once.
Signed-off-by: Jordan Rife <jordan@jrife.io>
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
Acked-by: Stanislav Fomichev <sdf@fomichev.me>
Stable-dep-of: e5fd3f514e ("bpf: tcp: Fix use-after-free in bpf_iter_tcp_established_batch()")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit efeb820951 ]
Prepare for the next patch that tracks cookies between iterations by
converting struct sock **batch to union bpf_tcp_iter_batch_item *batch
inside struct bpf_tcp_iter_state.
Signed-off-by: Jordan Rife <jordan@jrife.io>
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
Reviewed-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Acked-by: Stanislav Fomichev <sdf@fomichev.me>
Stable-dep-of: e5fd3f514e ("bpf: tcp: Fix use-after-free in bpf_iter_tcp_established_batch()")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit e25ab9b874 ]
Get rid of the st_bucket_done field to simplify TCP iterator state and
logic. Before, st_bucket_done could be false if bpf_iter_tcp_batch
returned a partial batch; however, with the last patch ("bpf: tcp: Make
sure iter->batch always contains a full bucket snapshot"),
st_bucket_done == true is equivalent to iter->cur_sk == iter->end_sk.
Signed-off-by: Jordan Rife <jordan@jrife.io>
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
Reviewed-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Acked-by: Stanislav Fomichev <sdf@fomichev.me>
Stable-dep-of: e5fd3f514e ("bpf: tcp: Fix use-after-free in bpf_iter_tcp_established_batch()")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit cdec67a489 ]
Require that iter->batch always contains a full bucket snapshot. This
invariant is important to avoid skipping or repeating sockets during
iteration when combined with the next few patches. Before, there were
two cases where a call to bpf_iter_tcp_batch may only capture part of a
bucket:
1. When bpf_iter_tcp_realloc_batch() returns -ENOMEM.
2. When more sockets are added to the bucket while calling
bpf_iter_tcp_realloc_batch(), making the updated batch size
insufficient.
In cases where the batch size only covers part of a bucket, it is
possible to forget which sockets were already visited, especially if we
have to process a bucket in more than two batches. This forces us to
choose between repeating or skipping sockets, so don't allow this:
1. Stop iteration and propagate -ENOMEM up to userspace if reallocation
fails instead of continuing with a partial batch.
2. Try bpf_iter_tcp_realloc_batch() with GFP_USER just as before, but if
we still aren't able to capture the full bucket, call
bpf_iter_tcp_realloc_batch() again while holding the bucket lock to
guarantee the bucket does not change. On the second attempt use
GFP_NOWAIT since we hold onto the spin lock.
I did some manual testing to exercise the code paths where GFP_NOWAIT is
used and where ERR_PTR(err) is returned. I used the realloc test cases
included later in this series to trigger a scenario where a realloc
happens inside bpf_iter_tcp_batch and made a small code tweak to force
the first realloc attempt to allocate a too-small batch, thus requiring
another attempt with GFP_NOWAIT. Some printks showed both reallocs with
the tests passing:
Jun 27 00:00:53 crow kernel: again GFP_USER
Jun 27 00:00:53 crow kernel: again GFP_NOWAIT
Jun 27 00:00:53 crow kernel: again GFP_USER
Jun 27 00:00:53 crow kernel: again GFP_NOWAIT
With this setup, I also forced each of the bpf_iter_tcp_realloc_batch
calls to return -ENOMEM to ensure that iteration ends and that the
read() in userspace fails.
Signed-off-by: Jordan Rife <jordan@jrife.io>
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
Reviewed-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Acked-by: Stanislav Fomichev <sdf@fomichev.me>
Stable-dep-of: e5fd3f514e ("bpf: tcp: Fix use-after-free in bpf_iter_tcp_established_batch()")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 8271bec9fc ]
Prepare for the next patch which needs to be able to choose either
GFP_USER or GFP_NOWAIT for calls to bpf_iter_tcp_realloc_batch.
Signed-off-by: Jordan Rife <jordan@jrife.io>
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
Reviewed-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Acked-by: Stanislav Fomichev <sdf@fomichev.me>
Stable-dep-of: e5fd3f514e ("bpf: tcp: Fix use-after-free in bpf_iter_tcp_established_batch()")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit f1a3a9946a ]
mchp_tc_probe() reads the devicetree "reg" cell - a u32, per the API
contract of of_property_read_u32_index() - into a signed int, so the
bounds check "channel > 2" fails to reject cell values at or above
0x80000000: reinterpreted as a negative int, they compare below 2 and
pass validation.
A malformed devicetree can therefore drive a negative channel into the
ATMEL_TC_REG() offset arithmetic, making the driver access syscon
regmap offsets outside the TC block's register window, and into the
"t%d_clk" clock-name formatting, where it truncates clk_name (sized
for "t0_clk".."t2_clk").
Declare channel as u32, matching the API contract; the unsigned
comparison then rejects everything except channels 0..2. Adjust the
format specifier to %u accordingly, which also resolves the W=1
warning that exposed the gap:
microchip-tcb-capture.c:520:56: warning: '%d' directive output may
be truncated writing between 1 and 11 bytes into a region of size
6 [-Wformat-truncation=]
note: directive argument in the range [-2147483648, 2]
No behavior change for well-formed devicetrees: channels 0..2 take
identical paths before and after.
Fixes: 106b104137 ("counter: Add microchip TCB capture counter")
Assisted-by: Claude:claude-fable-5 [gcc W=1]
Signed-off-by: Babanpreet Singh <bbnpreetsingh@gmail.com>
Reviewed-by: Joshua Crofts <joshua.crofts1@gmail.com>
Link: https://lore.kernel.org/r/20260714042910.7-1-bbnpreetsingh@gmail.com
Signed-off-by: William Breathitt Gray <wbg@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 1c4dac9bf1 ]
devlink_nl_reload_doit() calls devlink_netns_get(), which returns a net
with a held reference. When the requested namespace differs from the
current one and the reload action is not DRIVER_REINIT, the function
returns -EOPNOTSUPP without releasing the reference. Add the missing
put_net() on this error path.
Fixes: 2edd925704 ("devlink: don't allow to change net namespace for FW_ACTIVATE reload action")
Signed-off-by: Or Har-Toov <ohartoov@nvidia.com>
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Reviewed-by: Antoine Tenart <atenart@kernel.org>
Link: https://patch.msgid.link/20260729080600.2427721-1-tariqt@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit f307a7dc32 ]
hix5hd2_dev_remove() calls netif_napi_del() before unregister_netdev().
This is not needed because free_netdev() deletes all NAPI instances
attached to the net_device.
Remove the redundant call and let the networking core tear down the NAPI
instance during unregister_netdev(). The probe error path still keeps its
explicit netif_napi_del(), because the device has not been registered
there.
Fixes: 57c5bc9ad7 ("net: hisilicon: add hix5hd2 mac driver")
Signed-off-by: Jiawen Liu <1298662399@qq.com>
Link: https://patch.msgid.link/tencent_5FFD37A252B4FEA6A80AD25B17C8E904F005@qq.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 47d7f70512 ]
The route4 classifier maintains a 16-slot fastmap cache that stores raw
struct route4_filter pointers indexed by (id, iif). The reader
(route4_classify) populates this cache via route4_set_fastmap() for every
classified packet that hits a filter. The writer (route4_delete,
route4_change) clears the cache via route4_reset_fastmap() before
RCU-deferred kfree of the filter.
This creates a UAF race:
1. Reader walks the RCU-protected bucket chain, finds filter f
2. Writer unlinks f, calls route4_reset_fastmap(), then tcf_queue_work()
3. Reader calls route4_set_fastmap() and writes f into the cache
*after* the writer's reset, caching a pointer about to be freed
4. After the RCU grace period, kfree(f) executes
5. Next classified packet on the same (id, iif) tuple hits the stale
fastmap entry and reads f->res from freed memory
Reproduced with an mdelay(100) accelerator in route4_set_fastmap() and a
concurrent add/delete stress test (provided by both zdi and Santosh).
Both triggered KASAN slab-use-after-free reports in the route4 fastmap
paths.
Fix:
Introduce a per-filter boolean dying flag to suppress stale fastmap
republishing by in-flight readers.
Fixes: 1109c00547 ("net: sched: RCU cls_route")
Reported-by: zdi-disclosures@trendmicro.com
Reported-by: Santosh Kalluri <santosh.kalluri129@gmail.com>
Suggested-by: Paolo Abeni <pabeni@redhat.com>
Tested-by: Victor Nogueira <victor@mojatatu.com>
Tested-by: Santosh Kalluri <santosh.kalluri129@gmail.com>
Signed-off-by: Jamal Hadi Salim <jhs@mojatatu.com>
Link: https://patch.msgid.link/20260729094411.46257-1-jhs@mojatatu.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 9762450949 ]
The SMC_LLC_CONFIRM_LINK / SMC_LLC_ADD_LINK_CONT branch in
smc_llc_event_handler() stores an incoming qentry into the local LLC flow
without first checking whether a qentry is already pending. If a malicious or
buggy peer sends a second CONFIRM_LINK or ADD_LINK_CONT request while a flow is
active and flow->qentry is already set, smc_llc_flow_qentry_set() overwrites the
pointer without freeing the previous allocation, leaking one kmalloc-96 object
per spurious message.
The sibling SMC_LLC_DELETE_LINK branch already has the correct !flow->qentry
guard. Apply the same guard to the CONFIRM_LINK/ADD_LINK_CONT branch so that a
duplicate message when qentry is already occupied falls through to break and is
freed by the kfree(qentry) at the out: label, rather than silently leaking the
existing allocation.
The response direction (smc_llc_rx_response()) is unaffected: it already guards
with flow->qentry at the equivalent site and drops duplicate responses
correctly.
Fixes: 0fb0b02bd6 ("net/smc: adapt SMC client code to use the LLC flow")
Signed-off-by: Mahanta Jambigi <mjambigi@linux.ibm.com>
Reviewed-by: Hidayath Khan <hidayath@linux.ibm.com>
Reviewed-by: Sidraya Jayagond <sidraya@linux.ibm.com>
Reviewed-by: Dust Li <dust.li@linux.alibaba.com>
Link: https://patch.msgid.link/20260729130153.970800-1-mjambigi@linux.ibm.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit a4c6f804b4 ]
When scalar += pointer is handled in adjust_ptr_min_max_vals(), the
destination register inherits the pointer state from the source pointer.
Copying only selected fields is fragile because pointer provenance is
tracked by several bpf_reg_state fields.
Use the caller's temporary offset register to preserve the scalar operand
while replacing the destination with the full pointer state. This preserves
the frame number for PTR_TO_STACK registers and keeps parent identity
fields consistent.
Fixes: f4d7e40a5b ("bpf: introduce function calls (verification)")
Signed-off-by: Yiyang Chen <chenyy23@mails.tsinghua.edu.cn>
Tested-by: Daniel Wade <danjwade95@gmail.com>
Acked-by: Shung-Hsi Yu <shung-hsi.yu@suse.com>
Link: https://patch.msgid.link/20260729-c3-035-public-bpf-v4-v4-2-8ee297e2346b@mails.tsinghua.edu.cn
Signed-off-by: Eduard Zingerman <eddyz87@gmail.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Larisa Grigore
Mehmet Fide
Qingshuang Fu
David Lechner
Wilken Gottwalt
Maximilian Immanuel Brandtner
Xin Long
Eric Dumazet
Dmitry Safonov
Hongyan Xu
Fan XinRan
Sidraya Jayagond
Pengpeng Hou
Henry Martin
Jiayuan Chen
Qing Luo
Keegan Freyhof
Michael Chan
Martin Kaiser
Guenter Roeck
Rob Herring
Jamal Hadi Salim
Jianbo Liu
Asbjørn Sloth Tønnesen
Cen Zhang (Microsoft)
Toke Høiland-Jørgensen
Xuanqiang Luo
Nathan Gao
Yousef Alhouseen
Jose Fernandez (Anthropic)
Jordan Rife
Babanpreet Singh
Michael Guralnik
Or Har-Toov
Jiawen Liu
Mahanta Jambigi
Yiyang Chen
Dmitry Antipov