Noticed that there is a useless return statement at the end of void
function dump_lpt_leb().
Just removing it.
Signed-off-by: Pintu Kumar <quic_pintu@quicinc.com>
Reviewed-by: Zhihao Cheng <chengzhihao1@huawei.com>
Signed-off-by: Richard Weinberger <richard@nod.at>
Added a check for ubi_num for negative numbers
If the variable ubi_num takes negative values then we get:
qemu-system-arm ... -append "ubi.mtd=0,0,0,-22222345" ...
[ 0.745065] ubi_attach_mtd_dev from ubi_init+0x178/0x218
[ 0.745230] ubi_init from do_one_initcall+0x70/0x1ac
[ 0.745344] do_one_initcall from kernel_init_freeable+0x198/0x224
[ 0.745474] kernel_init_freeable from kernel_init+0x18/0x134
[ 0.745600] kernel_init from ret_from_fork+0x14/0x28
[ 0.745727] Exception stack(0x90015fb0 to 0x90015ff8)
Found by Linux Verification Center (linuxtesting.org) with SVACE.
Fixes: 83ff59a066 ("UBI: support ubi_num on mtd.ubi command line")
Cc: stable@vger.kernel.org
Signed-off-by: Denis Arefev <arefev@swemel.ru>
Reviewed-by: Zhihao Cheng <chengzhihao1@huawei.com>
Signed-off-by: Richard Weinberger <richard@nod.at>
Add a new device_setup option (SCARLETT2_USE_FCP_DRIVER = 0x08) that
allows users to opt in to using the new FCP driver instead of the
existing scarlett2 driver for their device. This provides a way to
test the new FCP driver on existing supported hardware while keeping
the Scarlett2 driver as the default.
When the SCARLETT2_USE_FCP_DRIVER bit is set in device_setup, the
scarlett2 driver initialisation will hand off to the FCP driver
instead of proceeding with its own initialisation. The FCP driver then
provides access to the device via its hwdep interface.
Signed-off-by: Geoffrey D. Bennett <g@b4.vu>
Link: https://patch.msgid.link/94ffd7971d73cb0cbea6933b28f7528ce5b9edde.1737048528.git.g@b4.vu
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Add a new kernel driver for the Focusrite Control Protocol (FCP),
which is used by Focusrite Scarlett 2nd Gen, 3rd Gen, 4th Gen, Clarett
USB, Clarett+, and Vocaster series audio interfaces. This driver
provides a user-space control interface via ALSA's hwdep subsystem.
Unlike the existing Scarlett2 driver which implements all ALSA
controls in kernel space, this new FCP driver takes a different
approach by providing a minimal kernel interface that allows a
user-space driver to send FCP commands and receive notifications. The
only control implemented in kernel space is the Level Meter, since it
requires frequent polling of volatile data.
While this driver supports all interfaces that the Scarlett2 driver
works with, it is initially enabled only for 4th Gen 16i16, 18i16,
and 18i20 interfaces that are not supported by the Scarlett2 driver.
Signed-off-by: Geoffrey D. Bennett <g@b4.vu>
Link: https://patch.msgid.link/597741a9b1198b965561547511d3d345f91cba20.1737048528.git.g@b4.vu
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Vladimir Oltean says:
====================
ethtool get_ts_stats() for DSA and ocelot driver
After a recent patch set with fixes and general restructuring, Jakub asked
for the Felix DSA driver to start reporting standardized statistics
for hardware timestamping:
https://lore.kernel.org/netdev/20241207180640.12da60ed@kernel.org/
Testing follows the same procedure as in the aforementioned series, with PTP
packet loss induced through taprio:
$ ethtool -I --show-time-stamping swp3
Time stamping parameters for swp3:
Capabilities:
hardware-transmit
software-transmit
hardware-receive
software-receive
software-system-clock
hardware-raw-clock
PTP Hardware Clock: 1
Hardware Transmit Timestamp Modes:
off
on
onestep-sync
Hardware Receive Filter Modes:
none
ptpv2-l4-event
ptpv2-l2-event
ptpv2-event
Statistics:
tx_pkts: 14591
tx_lost: 85
tx_err: 0
v1: https://lore.kernel.org/20241213140852.1254063-1-vladimir.oltean@nxp.com/
====================
Link: https://patch.msgid.link/20250116104628.123555-1-vladimir.oltean@nxp.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Add an u64 hardware timestamping statistics structure for each ocelot
port. Export a function from the common switch library for reporting
them to ethtool. This is called by the ocelot switchdev front-end for
now.
Note that for the switchdev driver, we report the one-step PTP packets
as unconfirmed, even though in principle, for some transmission
mechanisms like FDMA, we may be able to confirm transmission and bump
the "pkts" counter in ocelot_fdma_tx_cleanup() instead. I don't have
access to hardware which uses the switchdev front-end, and I've kept the
implementation simple.
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: Jakub Kicinski <kuba@kernel.org>
Link: https://patch.msgid.link/20250116104628.123555-4-vladimir.oltean@nxp.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
For packets with two-step timestamp requests, the hardware timestamp
comes back to the driver through a confirmation mechanism of sorts,
which allows the driver to confidently bump the successful "pkts"
counter.
For one-step PTP, the NIC is supposed to autonomously insert its
hardware TX timestamp in the packet headers while simultaneously
transmitting it. There may be a confirmation that this was done
successfully, or there may not.
None of the current drivers which implement ethtool_ops :: get_ts_stats()
also support HWTSTAMP_TX_ONESTEP_SYNC or HWTSTAMP_TX_ONESTEP_SYNC, so it
is a bit unclear which model to follow. But there are NICs, such as DSA,
where there is no transmit confirmation at all. Here, it would be wrong /
misleading to increment the successful "pkts" counter, because one-step
PTP packets can be dropped on TX just like any other packets.
So introduce a special counter which signifies "yes, an attempt was made,
but we don't know whether it also exited the port or not". I expect that
for one-step PTP packets where a confirmation is available, the "pkts"
counter would be bumped.
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: Jakub Kicinski <kuba@kernel.org>
Link: https://patch.msgid.link/20250116104628.123555-2-vladimir.oltean@nxp.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Petr Machata says:
====================
mlxsw: Move Tx header handling to PCI driver
Amit Cohen writes:
Tx header should be added to all packets transmitted from the CPU to
Spectrum ASICs. Historically, handling this header was added as a driver
function, as Tx header is different between Spectrum and Switch-X.
From May 2021, there is no support for SwitchX-2 ASIC, and all the relevant
code was removed.
For now, there is no justification to handle Tx header as part of
spectrum.c, we can handle this as part of PCI, in skb_transmit().
This change will also be useful when XDP support will be added to mlxsw,
as for XDP_TX and XDP_REDIRECT actions, Tx header should be added before
transmitting the packet.
Patch set overview:
Patches #1-#2 add structure to store Tx header info and initialize it
Patch #3 moves definitions of Tx header fields to txheader.h
Patch #4 moves Tx header handling to PCI driver
Patch #5 removes unnecessary attribute
====================
Link: https://patch.msgid.link/cover.1737044384.git.petrm@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Tx header should be added to all packets transmitted from the CPU to
Spectrum ASICs. Historically, handling this header was added as a driver
function, as Tx header is different between Spectrum and Switch-X. See
SwitchX implementation in commit 31557f0f97 ("mlxsw: Introduce
Mellanox SwitchX-2 ASIC support"). From May 2021, there is no support
for SwitchX-2 ASIC, and all the relevant code was removed.
For now, there is no justification to handle Tx header as part of
spectrum.c, we can handle this as part of PCI, in skb_transmit().
A future patch set will add support for XDP in mlxsw driver, to support
XDP_TX and XDP_REDIRECT actions, Tx header should be added before
transmitting the packet. As preparation for this, move Tx header handling
to PCI driver, so then XDP code will not have to call API from spectrum.c.
This also improves the code as now Tx header is pushed just before
transmitting, so it is not done from many flows which might miss something.
Note that for PTP, we should configure Tx header differently, use the
fields from mlxsw_txhdr_info to configure the packets correctly in PCI
driver. Handle VLAN tagging in switch driver, verify that packet which
should be transmitted as data is tagged, otherwise, tag it.
Remove the calls for thxdr_construct() functions, as now this is done as
part of skb_transmit().
Signed-off-by: Amit Cohen <amcohen@nvidia.com>
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Signed-off-by: Petr Machata <petrm@nvidia.com>
Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com>
Link: https://patch.msgid.link/293a81e6f7d59a8ec9f9592edb7745536649ff11.1737044384.git.petrm@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
A next patch will construct Tx header as part of pci.c. The switch driver
(mlxsw_spectrum.ko) should encapsulate all the differences between the
different ASICs and the bus driver (mlxsw_pci.ko) should remain unaware.
As preparation, add the relevant info as part of mlxsw_txhdr_info
structure, so later bus driver will merely construct the Tx header based on
information passed from the switch driver.
Most of the packets are transmitted as control packets, but PTP packets in
Spectrum-2 and Spectrum-3 should be handled differently. The driver
transmits them as data packets, and the default VLAN tag (4095) is added if
the packet is not already tagged.
Extend PTP operations to store a boolean which indicates whether packets
should be transmitted as data packets. Set it for Spectrum-2 and
Spectrum-3 only. Extend mlxsw_txhdr_info to store fields which will be used
later to construct Tx header. Initialize such fields according to the new
boolean which is stored in PTP operations.
Note that for now, mlxsw_txhdr_info structure is initialized, but not used,
a next patch will use it.
Signed-off-by: Amit Cohen <amcohen@nvidia.com>
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Signed-off-by: Petr Machata <petrm@nvidia.com>
Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com>
Link: https://patch.msgid.link/efcaacd4bedef524e840a0c29f96cebf2c4bc0e0.1737044384.git.petrm@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
mlxsw_tx_info structure is used to store information that is needed to
process Tx completions when Tx time stamps are requested. A next patch
will move Tx header handling from spectrum.c to pci.c. For that, some
additional fields which are related to Tx should be passed to pci driver.
As preparation, create an extended structure, called mlxsw_txhdr_info,
and store mlxsw_tx_info inside. The new fields should not be added to
mlxsw_tx_info structure as it is stored in the SKB control block which is
of limited size.
The next patch will extend the new structure with some fields which are
needed in order to construct Tx header.
Signed-off-by: Amit Cohen <amcohen@nvidia.com>
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Signed-off-by: Petr Machata <petrm@nvidia.com>
Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com>
Link: https://patch.msgid.link/93aed1961f046f79f46869bab37a3faa5027751d.1737044384.git.petrm@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Shifting dest_attr->vport.vhca_id << 16 results in a promotion from an
unsigned 16 bit integer to a 32 bit signed integer, this is then sign
extended to a 64 bit unsigned long on 64 bitarchitectures. If vhca_id is
greater than 0x7fff then this leads to a sign extended result where all
the upper 32 bits of idx are set to 1. Fix this by casting vhca_id
to the same type as idx before performing the shift.
Fixes: 8e2e08a6d1 ("net/mlx5: fs, add support for dest vport HWS action")
Signed-off-by: Colin Ian King <colin.i.king@gmail.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Acked-by: Moshe Shemesh <moshe@nvidia.com>
Link: https://patch.msgid.link/20250116181700.96437-1-colin.i.king@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The existing error message ("Invalid qdisc name") is confusing
because it suggests that there is no qdisc with the given name. In
fact, the name does refer to a valid qdisc, but it doesn't match
the kind of an existing qdisc being modified or replaced. The
new error message provides more detail to eliminate confusion.
Signed-off-by: John Ousterhout <ouster@cs.stanford.edu>
Acked-by: Jamal Hadi Salim <jhs@mojatatu.com>
Link: https://patch.msgid.link/20250116195642.2794-1-ouster@cs.stanford.edu
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The following problem was encountered during stability test:
(NULL net_device): NAPI poll function process_backlog+0x0/0x530 \
returned 1, exceeding its budget of 0.
------------[ cut here ]------------
list_add double add: new=ffff88905f746f48, prev=ffff88905f746f48, \
next=ffff88905f746e40.
WARNING: CPU: 18 PID: 5462 at lib/list_debug.c:35 \
__list_add_valid_or_report+0xf3/0x130
CPU: 18 UID: 0 PID: 5462 Comm: ping Kdump: loaded Not tainted 6.13.0-rc7+
RIP: 0010:__list_add_valid_or_report+0xf3/0x130
Call Trace:
? __warn+0xcd/0x250
? __list_add_valid_or_report+0xf3/0x130
enqueue_to_backlog+0x923/0x1070
netif_rx_internal+0x92/0x2b0
__netif_rx+0x15/0x170
loopback_xmit+0x2ef/0x450
dev_hard_start_xmit+0x103/0x490
__dev_queue_xmit+0xeac/0x1950
ip_finish_output2+0x6cc/0x1620
ip_output+0x161/0x270
ip_push_pending_frames+0x155/0x1a0
raw_sendmsg+0xe13/0x1550
__sys_sendto+0x3bf/0x4e0
__x64_sys_sendto+0xdc/0x1b0
do_syscall_64+0x5b/0x170
entry_SYSCALL_64_after_hwframe+0x76/0x7e
The reproduction command is as follows:
sysctl -w net.core.dev_weight=0
ping 127.0.0.1
This is because when the napi's weight is set to 0, process_backlog() may
return 0 and clear the NAPI_STATE_SCHED bit of napi->state, causing this
napi to be re-polled in net_rx_action() until __do_softirq() times out.
Since the NAPI_STATE_SCHED bit has been cleared, napi_schedule_rps() can
be retriggered in enqueue_to_backlog(), causing this issue.
Making the napi's weight always non-zero solves this problem.
Triggering this issue requires system-wide admin (setting is
not namespaced).
Fixes: e387660545 ("[NET]: Fix sysctl net.core.dev_weight")
Fixes: 3d48b53fb2 ("net: dev_weight: TX/RX orthogonality")
Signed-off-by: Liu Jian <liujian56@huawei.com>
Link: https://patch.msgid.link/20250116143053.4146855-1-liujian56@huawei.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Commit b9d5f5711d ("selftests: net: increase the delay for relative
cmsg_time.sh test") widened the accepted value range 8x but we still
see flakes (at a rate of around 7%).
Return XFAIL for the most timing sensitive test on slow machines.
Before:
# ./cmsg_time.sh
Case UDPv4 - TXTIME rel returned '8074us - 7397us < 4000', expected 'OK'
FAIL - 1/36 cases failed
After:
# ./cmsg_time.sh
Case UDPv4 - TXTIME rel returned '1123us - 941us < 500', expected 'OK' (XFAIL)
Case UDPv6 - TXTIME rel returned '1227us - 776us < 500', expected 'OK' (XFAIL)
OK
Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com>
Reviewed-by: Willem de Bruijn <willemb@google.com>
Link: https://patch.msgid.link/20250116020105.931338-1-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
8BitDo Pro 2 Wired Controller shares the same USB identifier
(2dc8:3106) as a different device, so amend name to reflect that and
reduce confusion as the user might think the controller was misdetected.
Because Pro 2 Wired will not work in XTYPE_XBOXONE mode (button presses
won't register), tagging it as XTYPE_XBOX360 remains appropriate.
Signed-off-by: Leonardo Brondani Schenkel <leonardo@schenkel.net>
Signed-off-by: Pavel Rojtberg <rojtberg@gmail.com>
Link: https://lore.kernel.org/r/20250107192830.414709-2-rojtberg@gmail.com
Cc: stable@vger.kernel.org
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
A longstanding issue with genksyms is that it has hidden syntax errors.
When a syntax error occurs, yyerror() is called. However,
error_with_pos() is a no-op unless the -w option is provided.
You can observe syntax errors by manually passing the -w option.
For example, with CONFIG_MODVERSIONS=y on v6.13-rc1:
$ make -s KCFLAGS=-D__GENKSYMS__ arch/x86/kernel/cpu/mshyperv.i
$ cat arch/x86/kernel/cpu/mshyperv.i | scripts/genksyms/genksyms -w
[ snip ]
./arch/x86/include/asm/svm.h:122: syntax error
The syntax error occurs in the following code in arch/x86/include/asm/svm.h:
struct __attribute__ ((__packed__)) vmcb_control_area {
[ snip ]
};
The issue arises from __attribute__ immediately after the 'struct'
keyword.
This commit allows the 'struct' keyword to be followed by attributes.
The lexer must be adjusted because dont_want_brace_phase should not be
decremented while processing attributes.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Acked-by: Nicolas Schier <n.schier@avm.de>
A longstanding issue with genksyms is that it has hidden syntax errors.
When a syntax error occurs, yyerror() is called. However,
error_with_pos() is a no-op unless the -w option is provided.
You can observe syntax errors by manually passing the -w option.
For example, with CONFIG_MODVERSIONS=y on v6.13-rc1:
$ make -s KCFLAGS=-D__GENKSYMS__ kernel/module/main.i
$ cat kernel/module/main.i | scripts/genksyms/genksyms -w
[ snip ]
kernel/module/main.c:97: syntax error
The syntax error occurs in the following code in kernel/module/main.c:
static void __mod_update_bounds(enum mod_mem_type type __maybe_unused, void *base,
unsigned int size, struct mod_tree_root *tree)
{
[ snip ]
}
The issue arises from __maybe_unused, which is defined as
__attribute__((__unused__)).
This commit allows direct_abstract_declarator to be followed with
attributes.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Acked-by: Nicolas Schier <n.schier@avm.de>
A longstanding issue with genksyms is that it has hidden syntax errors.
When a syntax error occurs, yyerror() is called. However,
error_with_pos() is a no-op unless the -w option is provided.
You can observe syntax errors by manually passing the -w option.
For example, with CONFIG_MODVERSIONS=y on v6.13-rc1:
$ make -s KCFLAGS=-D__GENKSYMS__ drivers/acpi/prmt.i
$ cat drivers/acpi/prmt.i | scripts/genksyms/genksyms -w
[ snip ]
drivers/acpi/prmt.c:56: syntax error
The syntax error occurs in the following code in drivers/acpi/prmt.c:
struct prm_handler_info {
[ snip ]
efi_status_t (__efiapi *handler_addr)(u64, void *);
[ snip ]
};
The issue arises from __efiapi, which is defined as either
__attribute__((ms_abi)) or __attribute__((regparm(0))).
This commit allows nested_declarator to be prefixed with attributes.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Acked-by: Nicolas Schier <n.schier@avm.de>
A longstanding issue with genksyms is that it has hidden syntax errors.
When a syntax error occurs, yyerror() is called. However,
error_with_pos() is a no-op unless the -w option is provided.
You can observe syntax errors by manually passing the -w option.
For example, with CONFIG_MODVERSIONS=y on v6.13-rc1:
$ make -s KCFLAGS=-D__GENKSYMS__ init/main.i
$ cat init/main.i | scripts/genksyms/genksyms -w
[ snip ]
./include/linux/efi.h:1225: syntax error
The syntax error occurs in the following code in include/linux/efi.h:
efi_status_t
efi_call_acpi_prm_handler(efi_status_t (__efiapi *handler_addr)(u64, void *),
u64 param_buffer_addr, void *context);
The issue arises from __efiapi, which is defined as either
__attribute__((ms_abi)) or __attribute__((regparm(0))).
This commit allows abstract_declarator to be prefixed with attributes.
To avoid conflicts, I tweaked the rule for decl_specifier_seq. Due to
this change, a standalone attribute cannot become decl_specifier_seq.
Otherwise, I do not know how to resolve the conflicts.
The following code, which was previously accepted by genksyms, will now
result in a syntax error:
void my_func(__attribute__((unused))x);
I do not think it is a big deal because GCC also fails to parse it.
$ echo 'void my_func(__attribute__((unused))x);' | gcc -c -x c -
<stdin>:1:37: error: unknown type name 'x'
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Acked-by: Nicolas Schier <n.schier@avm.de>
The __attribute__ keyword can appear in more contexts than 'const' or
'volatile'.
To avoid grammatical conflicts with future changes, ATTRIBUTE_PHRASE
should not be reduced into type_qualifier.
No functional changes are intended.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Acked-by: Nicolas Schier <n.schier@avm.de>
I believe the missing action here is a bug.
For rules with no explicit action, the following default is used:
{ $$ = $1; }
However, in this case, $1 is the value of attribute_opt itself. As a
result, the value of attribute_opt is always NULL.
The following test code demonstrates inconsistent behavior.
int x __attribute__((__aligned__(4)));
int y __attribute__((__aligned__(4))) = 0;
The attribute is recorded only when followed by an initializer.
This commit adds the correct action to propagate the value of the
ATTRIBUTE_PHRASE token.
With this change, the attribute in the example above is consistently
recorded for both 'x' and 'y'.
[Before]
$ cat <<EOF | scripts/genksyms/genksyms -d
int x __attribute__((__aligned__(4)));
int y __attribute__((__aligned__(4))) = 0;
EOF
Defn for type0 x == <int x >
Defn for type0 y == <int y __attribute__ ( ( __aligned__ ( 4 ) ) ) >
Hash table occupancy 2/4096 = 0.000488281
[After]
$ cat <<EOF | scripts/genksyms/genksyms -d
int x __attribute__((__aligned__(4)));
int y __attribute__((__aligned__(4))) = 0;
EOF
Defn for type0 x == <int x __attribute__ ( ( __aligned__ ( 4 ) ) ) >
Defn for type0 y == <int y __attribute__ ( ( __aligned__ ( 4 ) ) ) >
Hash table occupancy 2/4096 = 0.000488281
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Acked-by: Nicolas Schier <n.schier@avm.de>
Similar to the previous commit, this change makes the parser logic a
little more accurate.
Currently, genksyms accepts the following invalid code:
struct foo {
int (*callback)(int)(int)(int);
};
A direct-declarator should not recursively absorb multiple
( parameter-type-list ) constructs.
In the example above, (*callback) should be followed by at most one
(int).
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Acked-by: Nicolas Schier <n.schier@avm.de>
While there is no more grammatical ambiguity in genksyms, the parser
logic is still inaccurate.
For example, genksyms accepts the following invalid C code:
void my_func(int ()(int));
This should result in a syntax error because () cannot be reduced to
<direct-abstract-declarator>.
( <abstract-declarator> ) can be reduced, but <abstract-declarator>
must not be empty in the following grammar from K&R [1]:
<direct-abstract-declarator> ::= ( <abstract-declarator> )
| {<direct-abstract-declarator>}? [ {<constant-expression>}? ]
| {<direct-abstract-declarator>}? ( {<parameter-type-list>}? )
Furthermore, genksyms accepts the following weird code:
void my_func(int (*callback)(int)(int)(int));
The parser allows <direct-abstract-declarator> to recursively absorb
multiple ( {<parameter-type-list>}? ), but this behavior is incorrect.
In the example above, (*callback) should be followed by at most one
(int).
[1]: https://cs.wmich.edu/~gupta/teaching/cs4850/sumII06/The%20syntax%20of%20C%20in%20Backus-Naur%20form.htm
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Acked-by: Nicolas Schier <n.schier@avm.de>
This workaround was introduced for suppressing the reduce/reduce conflict
warnings because the %expect-rr directive, which is applicable only to GLR
parsers, cannot be used for genksyms.
Since there are no longer any conflicts, this Makefile hack is now
unnecessary.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Acked-by: Nicolas Schier <n.schier@avm.de>
The genksyms parser has ambiguities in its grammar, which are currently
suppressed by a workaround in scripts/genksyms/Makefile.
Building genksyms with W=1 generates the following warnings:
YACC scripts/genksyms/parse.tab.[ch]
scripts/genksyms/parse.y: warning: 3 shift/reduce conflicts [-Wconflicts-sr]
scripts/genksyms/parse.y: note: rerun with option '-Wcounterexamples' to generate conflict counterexamples
The ambiguity arises when decl_specifier_seq is followed by '(' because
the following two interpretations are possible:
- decl_specifier_seq direct_abstract_declarator '(' parameter_declaration_clause ')'
- decl_specifier_seq '(' abstract_declarator ')'
This issue occurs because the current parser allows an empty string to
be reduced to direct_abstract_declarator, which is incorrect.
K&R [1] explains the correct grammar:
<parameter-declaration> ::= {<declaration-specifier>}+ <declarator>
| {<declaration-specifier>}+ <abstract-declarator>
| {<declaration-specifier>}+
<abstract-declarator> ::= <pointer>
| <pointer> <direct-abstract-declarator>
| <direct-abstract-declarator>
<direct-abstract-declarator> ::= ( <abstract-declarator> )
| {<direct-abstract-declarator>}? [ {<constant-expression>}? ]
| {<direct-abstract-declarator>}? ( {<parameter-type-list>}? )
This commit resolves all remaining conflicts.
We need to consider the difference between the following two examples:
[Example 1] ( <abstract-declarator> ) can become <direct-abstract-declarator>
void my_func(int (foo));
... is equivalent to:
void my_func(int foo);
[Example 2] ( <parameter-type-list> ) can become <direct-abstract-declarator>
typedef int foo;
void my_func(int (foo));
... is equivalent to:
void my_func(int (*callback)(int));
Please note that the function declaration is identical in both examples,
but the preceding typedef creates the distinction. I introduced a new
term, open_paren, to enable the type lookup immediately after the '('
token. Without this, we cannot distinguish between [Example 1] and
[Example 2].
[1]: https://cs.wmich.edu/~gupta/teaching/cs4850/sumII06/The%20syntax%20of%20C%20in%20Backus-Naur%20form.htm
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Acked-by: Nicolas Schier <n.schier@avm.de>
The genksyms parser has ambiguities in its grammar, which are currently
suppressed by a workaround in scripts/genksyms/Makefile.
Building genksyms with W=1 generates the following warnings:
YACC scripts/genksyms/parse.tab.[ch]
scripts/genksyms/parse.y: warning: 9 shift/reduce conflicts [-Wconflicts-sr]
scripts/genksyms/parse.y: warning: 5 reduce/reduce conflicts [-Wconflicts-rr]
scripts/genksyms/parse.y: note: rerun with option '-Wcounterexamples' to generate conflict counterexamples
The comment in the parser describes the current problem:
/* This wasn't really a typedef name but an identifier that
shadows one. */
Consider the following simple C code:
typedef int foo;
void my_func(foo foo) {}
In the function parameter list (foo foo), the first 'foo' is a type
specifier (typedef'ed as 'int'), while the second 'foo' is an identifier.
However, the lexer cannot distinguish between the two. Since 'foo' is
already typedef'ed, the lexer returns TYPE for both instances, instead
of returning IDENT for the second one.
To support shadowed identifiers, TYPE can be reduced to either a
simple_type_specifier or a direct_abstract_declarator, which creates
a grammatical ambiguity.
Without analyzing the grammar context, it is very difficult to resolve
this correctly.
This commit introduces a flag, dont_want_type_specifier, which allows
the parser to inform the lexer whether an identifier is expected. When
dont_want_type_specifier is true, the type lookup is suppressed, and
the lexer returns IDENT regardless of any preceding typedef.
After this commit, only 3 shift/reduce conflicts will remain.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Acked-by: Nicolas Schier <n.schier@avm.de>
When running the sign script the kernel is within the source directory
of external modules. This caused issues when the kernel uses relative
paths, like:
make[5]: Entering directory '/build/client/devel/kernel/work/linux-2.6'
make[6]: Entering directory '/build/client/devel/addmodules/vtx/work/vtx'
INSTALL /build/client/devel/addmodules/vtx/_/lib/modules/6.13.0-devel+/extra/vtx.ko
SIGN /build/client/devel/addmodules/vtx/_/lib/modules/6.13.0-devel+/extra/vtx.ko
/bin/sh: 1: scripts/sign-file: not found
DEPMOD /build/client/devel/addmodules/vtx/_/lib/modules/6.13.0-devel+
Working around it by using absolute pathes here.
Fixes: 13b25489b6 ("kbuild: change working directory to external module directory with M=")
Signed-off-by: Torsten Hilbrich <torsten.hilbrich@secunet.com>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Commit 654102df2a ("kbuild: add generic support for built-in boot
DTBs") introduced generic support for built-in DTBs.
Select GENERIC_BUILTIN_DTB to use the generic rule.
To keep consistency across architectures, this commit also renames
CONFIG_ARC_BUILTIN_DTB_NAME to CONFIG_BUILTIN_DTB_NAME.
Now, "nsim_700" is the default value for CONFIG_BUILTIN_DTB_NAME, rather
than a fallback in case it is empty.
Acked-by: Vineet Gupta <vgupta@kernel.org>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Previously, two things stopped Rust from using MODVERSIONS:
1. Rust symbols are occasionally too long to be represented in the
original versions table
2. Rust types cannot be properly hashed by the existing genksyms
approach because:
* Looking up type definitions in Rust is more complex than C
* Type layout is potentially dependent on the compiler in Rust,
not just the source type declaration.
CONFIG_EXTENDED_MODVERSIONS addresses the first point, and
CONFIG_GENDWARFKSYMS the second. If Rust wants to use MODVERSIONS, allow
it to do so by selecting both features.
Signed-off-by: Sami Tolvanen <samitolvanen@google.com>
Co-developed-by: Matthew Maurer <mmaurer@google.com>
Signed-off-by: Matthew Maurer <mmaurer@google.com>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Pull devicetree fixes from Rob Herring:
"Another fix and testcase to avoid the newly added WARN in the case of
non-translatable addresses"
* tag 'devicetree-fixes-for-6.13-2' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux:
of/address: Fix WARN when attempting translating non-translatable addresses
of/unittest: Add test that of_address_to_resource() fails on non-translatable address
Pull SoC fixes from Arnd Bergmann:
"Two last minute fixes: one build issue on TI soc drivers, and a
regression in the renesas reset controller driver"
* tag 'soc-fixes-6.13-4' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc:
soc: ti: pruss: Fix pruss APIs
reset: rzg2l-usbphy-ctrl: Assign proper of node to the allocated device
Use ->d_seq instead of grabbing ->d_lock; in case of shortname dentries
that avoids any stores to shared data objects and in case of long names
we are down to (unavoidable) atomic_inc on the external_name refcount.
Makes the thing safer as well - the areas where ->d_seq is held odd are
all nested inside the areas where ->d_lock is held, and the latter are
much more numerous.
NOTE: now that there is a lockless path where we might try to grab
a reference to an already doomed external_name instance, it is no
longer possible for external_name.u.count and external_name.u.head
to share space (kudos to Linus for spotting that).
To reduce the noise this commit just make external_name.u a struct
(instead of union); the next commit will dissolve it.
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Reviewed-by: Jan Kara <jack@suse.cz>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
... so that they can be copied with struct assignment (which generates
better code) and accessed word-by-word.
The type is union shortname_storage; it's a union of arrays of
unsigned char and unsigned long.
struct name_snapshot.inline_name turned into union shortname_storage;
users (all in fs/dcache.c) adjusted.
struct dentry.d_iname has some users outside of fs/dcache.c; to
reduce the amount of noise in commit, it is replaced with
union shortname_storage d_shortname and d_iname is turned into a macro
that expands to d_shortname.string (similar to d_lock handling).
That compat macro is temporary - most of the remaining instances will
be taken out by debugfs series, and once that is merged and few others
are taken care of this will go away.
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Reviewed-by: Jan Kara <jack@suse.cz>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Pintu Kumar
Denis Arefev
Geoffrey D. Bennett
Takashi Iwai
Jakub Kicinski
Vladimir Oltean
Amit Cohen
Colin Ian King
John Ousterhout
Thorsten Blum
Guillaume Nault
Maher Sanalla
Liu Jian
Matheos Mattsson
Nilton Perim Neto
Jack Greiner
Leonardo Brondani Schenkel
Masahiro Yamada
Torsten Hilbrich
Sami Tolvanen
Linus Torvalds
Al Viro