... calling the number of words DNAME_INLINE_WORDS.
The next step will be to have a structure to hold inline name arrays
(both in dentry and in name_snapshot) and use that to alias the
existing arrays of unsigned char there. That will allow both
full-structure copies and convenient word-by-word accesses.
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Reviewed-by: Jan Kara <jack@suse.cz>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Pull mtd revert from Miquel Raynal:
"Very late this cycle we identified a breakage that could potentially
hit several spi controller drivers because of a change in the way the
dummy cycles validity is checked.
We do not know at the moment how to handle the situation properly, so
we prefer to revert the faulty patch for the next release"
* tag 'mtd/fixes-for-6.13' of git://git.kernel.org/pub/scm/linux/kernel/git/mtd/linux:
Revert "mtd: spi-nor: core: replace dummy buswidth from addr to data"
Support atomic writes by setting DM_TARGET_ATOMIC_WRITES for the target
type, and also unmasking REQ_ATOMIC from the submitted bio op flags.
Signed-off-by: John Garry <john.g.garry@oracle.com>
Reviewed-by: Mike Snitzer <snitzer@kernel.org>
Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
A region should just be for a single atomic write, so warn when we are
creating many. This should not occur if request queue limits are properly
configured.
Signed-off-by: John Garry <john.g.garry@oracle.com>
Reviewed-by: Mike Snitzer <snitzer@kernel.org>
Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
Set feature flag DM_TARGET_ATOMIC_WRITES.
Similar to md raid0, the chunk size set in stripe_io_hints() limits the
atomic write unit max.
Signed-off-by: John Garry <john.g.garry@oracle.com>
Reviewed-by: Mike Snitzer <snitzer@kernel.org>
Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
For an atomic write, a cloned bio must be same length as the original bio,
i.e. no splitting.
Error in case it is not.
Per-dm device queue limits should be setup to ensure that this does not
happen, but error this case as an insurance policy.
Signed-off-by: John Garry <john.g.garry@oracle.com>
Reviewed-by: Mike Snitzer <snitzer@kernel.org>
Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
Support stacking atomic write limits for DM devices.
All the pre-existing code in blk_stack_atomic_writes_limits() already takes
care of finding the aggregrate limits from the bottom devices.
Feature flag DM_TARGET_ATOMIC_WRITES is introduced so that atomic writes
can be enabled on personalities selectively. This is to ensure that atomic
writes are only enabled when verified to be working properly (for a
specific personality). In addition, it just may not make sense to enable
atomic writes on some personalities (so this flag also helps there).
Signed-off-by: John Garry <john.g.garry@oracle.com>
Reviewed-by: Mike Snitzer <snitzer@kernel.org>
Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
Tracing tools like perf and trace-cmd read the /sys/kernel/tracing/events/*/*/format
files to know how to parse the data and also how to print it. For the
"print fmt" portion of that file, if anything uses an enum that is not
exported to the tracing system, user space will not be able to parse it.
The GFP flags use to be defines, and defines get translated in the print
fmt sections. But now they are converted to use enums, which is not.
The mm_page_alloc trace event format use to have:
print fmt: "page=%p pfn=0x%lx order=%d migratetype=%d gfp_flags=%s",
REC->pfn != -1UL ? (((struct page *)vmemmap_base) + (REC->pfn)) : ((void
*)0), REC->pfn != -1UL ? REC->pfn : 0, REC->order, REC->migratetype,
(REC->gfp_flags) ? __print_flags(REC->gfp_flags, "|", {( unsigned
long)(((((((( gfp_t)(0x400u|0x800u)) | (( gfp_t)0x40u) | (( gfp_t)0x80u) |
(( gfp_t)0x100000u)) | (( gfp_t)0x02u)) | (( gfp_t)0x08u) | (( gfp_t)0)) |
(( gfp_t)0x40000u) | (( gfp_t)0x80000u) | (( gfp_t)0x2000u)) & ~((
gfp_t)(0x400u|0x800u))) | (( gfp_t)0x400u)), "GFP_TRANSHUGE"}, {( unsigned
long)((((((( gfp_t)(0x400u|0x800u)) | (( gfp_t)0x40u) | (( gfp_t)0x80u) |
(( gfp_t)0x100000u)) | (( gfp_t)0x02u)) | (( gfp_t)0x08u) | (( gfp_t)0)) ...
Where the GFP values are shown and not their names. But after the GFP
flags were converted to use enums, it has:
print fmt: "page=%p pfn=0x%lx order=%d migratetype=%d gfp_flags=%s",
REC->pfn != -1UL ? (vmemmap + (REC->pfn)) : ((void *)0), REC->pfn != -1UL
? REC->pfn : 0, REC->order, REC->migratetype, (REC->gfp_flags) ?
__print_flags(REC->gfp_flags, "|", {( unsigned long)((((((((
gfp_t)(((((1UL))) << (___GFP_DIRECT_RECLAIM_BIT))|((((1UL))) <<
(___GFP_KSWAPD_RECLAIM_BIT)))) | (( gfp_t)((((1UL))) << (___GFP_IO_BIT)))
| (( gfp_t)((((1UL))) << (___GFP_FS_BIT))) | (( gfp_t)((((1UL))) <<
(___GFP_HARDWALL_BIT)))) | (( gfp_t)((((1UL))) << (___GFP_HIGHMEM_BIT))))
| (( gfp_t)((((1UL))) << (___GFP_MOVABLE_BIT))) | (( gfp_t)0)) | ((
gfp_t)((((1UL))) << (___GFP_COMP_BIT))) ...
Where the enums names like ___GFP_KSWAPD_RECLAIM_BIT are shown and not their
values. User space has no way to convert these names to their values and
the output will fail to parse. What is shown is now:
mm_page_alloc: page=0xffffffff981685f3 pfn=0x1d1ac1 order=0 migratetype=1 gfp_flags=0x140cca
The TRACE_DEFINE_ENUM() macro was created to handle enums in the print fmt
files. This causes them to be replaced at boot up with the numbers, so
that user space tooling can parse it. By using this macro, the output is
back to the human readable:
mm_page_alloc: page=0xffffffff981685f3 pfn=0x122233 order=0 migratetype=1 gfp_flags=GFP_HIGHUSER_MOVABLE|__GFP_COMP
Cc: stable@vger.kernel.org
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Veronika Molnarova <vmolnaro@redhat.com>
Cc: Suren Baghdasaryan <surenb@google.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Link: https://lore.kernel.org/20250116214438.749504792@goodmis.org
Reported-by: Michael Petlan <mpetlan@redhat.com>
Closes: https://lore.kernel.org/all/87be5f7c-1a0-dad-daa0-54e342efaea7@redhat.com/
Fixes: 772dd03427 ("mm: enumerate all gfp flags")
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
There was reported performance degradation when the shadow map contained
too many entries [1]. The shadow map uses 256-bucket hash with linear
lists - when there are too many entries, it has quadratic complexity.
Meir Elisha proposed to add a module parameter that could configure the
size of the hash array - however, this is not ideal because users don't
know that they should increase the parameter when they get bad
performance.
This commit replaces the linear lists with rb-trees (so that there's a
hash of rb-trees), they have logarithmic complexity, so it solves the
performance degradation.
Link: https://patchwork.kernel.org/project/dm-devel/patch/20241014134944.1264991-1-meir.elisha@volumez.com/ [1]
Reported-by: Meir Elisha <meir.elisha@volumez.com>
Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
REQ_NOWAIT for flushes cannot be easily supported by device mapper
because it may allocate multiple bios and its impossible to undo if one
of those allocations wants to wait. So, this patch disables REQ_NOWAIT
flushes in device mapper and we always return EAGAIN.
Previously, the code accepted REQ_NOWAIT flushes, but the non-blocking
execution was not guaranteed.
Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
The test gfp_flag & GFP_NOWAIT was always true, because both GFP_NOIO and
GFP_NOWAIT include the flag __GFP_KSWAPD_RECLAIM. Luckily, this oversight
didn't result in any harm; the loop always started with "try = 0".
This patch removes the faulty test and explicitly starts the loop with
"try = 0" (so that we don't hold the mutex in the first iteration).
Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
Merge additional cpupower update for 6.14 from Shuah Khan:
"- Add missing residency header changes in cpuidle.h to SWIG"
* tag 'linux-cpupower-6.14-rc1-second' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/shuah/linux:
pm: cpupower: Add missing residency header changes in cpuidle.h to SWIG
Pull hwmon fixes from Guenter Roeck:
- ltc2991, tmp513: Fix problems seen when dividing negative numbers
- drivetemp: Handle large timeouts observed on some drives
- acpi_power_meter: Fix loading the driver on platforms without _PMD
method
* tag 'hwmon-for-v6.13-rc8' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging:
hwmon: (ltc2991) Fix mixed signed/unsigned in DIV_ROUND_CLOSEST
hwmon: (drivetemp) Set scsi command timeout to 10s
hwmon: (acpi_power_meter) Fix a check for the return value of read_domain_devices().
hwmon: (tmp513) Fix division of negative numbers
Currently only stacked devices need to explicitly enable atomic writes by
setting BLK_FEAT_ATOMIC_WRITES_STACKED flag.
This does not work well for device mapper stacking devices, as there many
sets of limits are stacked and what is the 'bottom' and 'top' device can
swapped. This means that BLK_FEAT_ATOMIC_WRITES_STACKED needs to be set
for many queue limits, which is messy.
Generalize enabling atomic writes enabling by ensuring that all devices
must explicitly set a flag - that includes NVMe, SCSI sd, and md raid.
Signed-off-by: John Garry <john.g.garry@oracle.com>
Reviewed-by: Mike Snitzer <snitzer@kernel.org>
Link: https://lore.kernel.org/r/20250116170301.474130-2-john.g.garry@oracle.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Pull gpio fix from Bartosz Golaszewski:
- convert regular spinlock to raw spinlock in gpio-xilinx to avoid a
lockdep splat
* tag 'gpio-fixes-for-v6.13' of git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux:
gpio: xilinx: Convert gpio_lock to raw spinlock
On the TUXEDO InfinityBook Pro Gen9 Intel, a Samsung 990 Evo NVMe leads to
a high power consumption in s2idle sleep (4 watts).
This patch applies 'Force No Simple Suspend' quirk to achieve a sleep with
a lower power consumption, typically around 1.2 watts.
Signed-off-by: Georg Gottleuber <ggo@tuxedocomputers.com>
Cc: stable@vger.kernel.org
Signed-off-by: Werner Sembach <wse@tuxedocomputers.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Keith Busch <kbusch@kernel.org>
On the TUXEDO InfinityFlex, a Samsung 990 Evo NVMe leads to a high power
consumption in s2idle sleep (4 watts).
This patch applies 'Force No Simple Suspend' quirk to achieve a sleep with
a lower power consumption, typically around 1.4 watts.
Signed-off-by: Georg Gottleuber <ggo@tuxedocomputers.com>
Cc: stable@vger.kernel.org
Signed-off-by: Werner Sembach <wse@tuxedocomputers.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Keith Busch <kbusch@kernel.org>
The value of size is 0 when there is no dma buffer allocated. The value
of i also remains 0. So, no need to free the dma buffer in out_free_bufs.
Hence, remove the redundant dma frees.
Signed-off-by: Francis Pravin <francis.p@samsung.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Keith Busch <kbusch@kernel.org>
Pull i2c fixes from Wolfram Sang:
- fix ref leak in the I2C core
- fix remove notification in the address translator
- missing error check in the pinctrl demuxer (plus a typo fix)
- fix NAK handling when Linux is testunit target
- fix NAK handling for the Renesas R-Car controller when it is a target
* tag 'i2c-for-6.13-rc8' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux:
i2c: testunit: on errors, repeat NACK until STOP
i2c: rcar: fix NACK handling when being a target
i2c: mux: demux-pinctrl: correct comment
i2c: mux: demux-pinctrl: check initial mux selection, too
i2c: atr: Fix client detach
i2c: core: fix reference leak in i2c_register_adapter()
* ras/edac-drivers:
EDAC/cell: Remove powerpc Cell driver
EDAC: Add an EDAC driver for the Loongson memory controller
EDAC/{i10nm,skx,skx_common}: Support UV systems
EDAC/i10nm: Add Intel Clearwater Forest server support
* ras/edac-misc:
EDAC: Fix typos in comments
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
`parse_lock_type` can only add the first lock flag in `lock_type_table`
given input `str`. For example, for `Y rwlock`, it only adds `rwlock:R`
into this perf session. Another example is for `-Y mutex`, it only adds
the mutex without `LCB_F_SPIN` flag. The patch fixes this issue, makes
sure both `rwlock:R` and `rwlock:W` will be added with `-Y rwlock`, and
so on.
Testing:
$ ./perf lock con -ab -Y mutex,rwlock -- perf bench sched pipe
# Running 'sched/pipe' benchmark:
# Executed 1000000 pipe operations between two processes
Total time: 9.313 [sec]
9.313976 usecs/op
107365 ops/sec
contended total wait max wait avg wait type caller
176 1.65 ms 19.43 us 9.38 us mutex pipe_read+0x57
34 180.14 us 10.93 us 5.30 us mutex pipe_write+0x50
7 77.48 us 16.09 us 11.07 us mutex do_epoll_wait+0x24d
7 74.70 us 13.50 us 10.67 us mutex do_epoll_wait+0x24d
3 35.97 us 14.44 us 11.99 us rwlock:W ep_done_scan+0x2d
3 35.00 us 12.23 us 11.66 us rwlock:W do_epoll_wait+0x255
2 15.88 us 11.96 us 7.94 us rwlock:W do_epoll_wait+0x47c
1 15.23 us 15.23 us 15.23 us rwlock:W do_epoll_wait+0x4d0
1 14.26 us 14.26 us 14.26 us rwlock:W ep_done_scan+0x2d
2 14.00 us 7.99 us 7.00 us mutex pipe_read+0x282
1 12.29 us 12.29 us 12.29 us rwlock:R ep_poll_callback+0x35
1 12.02 us 12.02 us 12.02 us rwlock:W do_epoll_ctl+0xb65
1 10.25 us 10.25 us 10.25 us rwlock:R ep_poll_callback+0x35
1 7.86 us 7.86 us 7.86 us mutex do_epoll_ctl+0x6c1
1 5.04 us 5.04 us 5.04 us mutex do_epoll_ctl+0x3d4
[namhyung: Add a comment and rename to 'mutex:spin' for consistency
Fixes: d783ea8f62 ("perf lock contention: Simplify parse_lock_type()")
Reviewed-by: Namhyung Kim <namhyung@kernel.org>
Signed-off-by: Chun-Tse Shao <ctshao@google.com>
Cc: nick.forrington@arm.com
Link: https://lore.kernel.org/r/20250116235838.2769691-1-ctshao@google.com
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
perf lock contention returns zero exit value even if the lock contention
BPF setup failed.
# ./perf lock con -b true
libbpf: kernel BTF is missing at '/sys/kernel/btf/vmlinux', was CONFIG_DEBUG_INFO_BTF enabled?
libbpf: failed to find '.BTF' ELF section in /lib/modules/6.13.0-rc3+/build/vmlinux
libbpf: failed to find valid kernel BTF
libbpf: kernel BTF is missing at '/sys/kernel/btf/vmlinux', was CONFIG_DEBUG_INFO_BTF enabled?
libbpf: failed to find '.BTF' ELF section in /lib/modules/6.13.0-rc3+/build/vmlinux
libbpf: failed to find valid kernel BTF
libbpf: Error loading vmlinux BTF: -ESRCH
libbpf: failed to load object 'lock_contention_bpf'
libbpf: failed to load BPF skeleton 'lock_contention_bpf': -ESRCH
Failed to load lock-contention BPF skeleton
lock contention BPF setup failed
# echo $?
0
Fix this by saving the return code for lock_contention_prepare
so that command exits with proper return code. Similarly set the
return code properly for two other functions in builtin-lock, namely
setup_output_field() and select_key().
Signed-off-by: Athira Rajeev <atrajeev@linux.vnet.ibm.com>
Reviewed-by: Namhyung Kim <namhyung@kernel.org>
Link: https://lore.kernel.org/r/20250110093730.93610-1-atrajeev@linux.vnet.ibm.com
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Check that a domain is not tied to the executable file that created it.
For instance, that could happen if a Landlock domain took a reference to
a struct path.
Move global path names to common.h and replace copy_binary() with a more
generic copy_file() helper.
Test coverage for security/landlock is 92.7% of 1133 lines according to
gcc/gcov-14.
Cc: Günther Noack <gnoack@google.com>
Link: https://lore.kernel.org/r/20250108154338.1129069-23-mic@digikod.net
[mic: Update date and add test coverage]
Signed-off-by: Mickaël Salaün <mic@digikod.net>
Always synchronize access_masked_parent* with access_request_parent*
according to allowed_parent*. This is required for audit support to be
able to get back to the reason of denial.
In a rename/link action, instead of always checking a rule two times for
the same parent directory of the source and the destination files, only
check it when an action on a child was not already allowed. This also
enables us to keep consistent allowed_parent* status, which is required
to get back to the reason of denial.
For internal mount points, only upgrade allowed_parent* to true but do
not wrongfully set both of them to false otherwise. This is also
required to get back to the reason of denial.
This does not impact the current behavior but slightly optimize code and
prepare for audit support that needs to know the exact reason why an
access was denied.
Cc: Günther Noack <gnoack@google.com>
Link: https://lore.kernel.org/r/20250108154338.1129069-14-mic@digikod.net
Signed-off-by: Mickaël Salaün <mic@digikod.net>
Add layout1.refer_part_mount_tree_is_allowed to test the masked logical
issue regarding collect_domain_accesses() calls followed by the
is_access_to_paths_allowed() check in current_check_refer_path(). See
previous commit.
This test should work without the previous fix as well, but it enables
us to make sure future changes will not have impact regarding this
behavior.
Cc: Günther Noack <gnoack@google.com>
Link: https://lore.kernel.org/r/20250108154338.1129069-13-mic@digikod.net
Signed-off-by: Mickaël Salaün <mic@digikod.net>
Fix a logical issue that could have been visible if the source or the
destination of a rename/link action was allowed for either the source or
the destination but not both. However, this logical bug is unreachable
because either:
- the rename/link action is allowed by the access rights tied to the
same mount point (without relying on access rights in a parent mount
point) and the access request is allowed (i.e. allow_parent1 and
allow_parent2 are true in current_check_refer_path),
- or a common rule in a parent mount point updates the access check for
the source and the destination (cf. is_access_to_paths_allowed).
See the following layout1.refer_part_mount_tree_is_allowed test that
work with and without this fix.
This fix does not impact current code but it is required for the audit
support.
Cc: Günther Noack <gnoack@google.com>
Link: https://lore.kernel.org/r/20250108154338.1129069-12-mic@digikod.net
Signed-off-by: Mickaël Salaün <mic@digikod.net>
Move LANDLOCK_ACCESS_FS_INITIALLY_DENIED, access_mask_t, struct
access_mask, and struct access_masks_all to a dedicated access.h file.
Rename LANDLOCK_ACCESS_FS_INITIALLY_DENIED to
_LANDLOCK_ACCESS_FS_INITIALLY_DENIED to make it clear that it's not part
of UAPI. Add some newlines when appropriate.
This file will be extended with following commits, and it will help to
avoid dependency loops.
Cc: Günther Noack <gnoack@google.com>
Link: https://lore.kernel.org/r/20250108154338.1129069-6-mic@digikod.net
[mic: Fix rebase conflict because of the new cleanup headers]
Signed-off-by: Mickaël Salaün <mic@digikod.net>
Replace ternary (condition ? "enable" : "disable") syntax with helpers
from string_choices.h because:
1. Simple function call with one argument is easier to read. Ternary
operator has three arguments and with wrapping might lead to quite
long code.
2. Is slightly shorter thus also easier to read.
3. It brings uniformity in the text - same string.
4. Allows deduping by the linker, which results in a smaller binary
file.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
Link: https://patch.msgid.link/20250114190600.846651-1-krzysztof.kozlowski@linaro.org
[ rjw: Subject and changelog edits ]
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Al Viro
Linus Torvalds
Dimitri Fedrau
Kim Seer Paller
John Garry
Steven Rostedt
Mikulas Patocka
Ethan Carter Edwards
liujing
Rafael J. Wysocki
Peng Fan
Georg Gottleuber
Francis Pravin
Borislav Petkov (AMD)
Chun-Tse Shao
Athira Rajeev
Mickaël Salaün
Krzysztof Kozlowski
Dmitry Vyukov
Kory Maincent