[ Upstream commit 18014147d3 ]
For lshift and rshift, the shift operations are performed in a loop over
32-bit words. The loop calculates the shifted value and write it to dst,
and then immediately reads from src to calculate the carry for the next
iteration. Because src and dst could point to the same memory location,
the carry is incorrectly calculated using the newly modified dst value
instead of the original src value.
Adding a temporary local variable to cache the original value before
writing to dst and using it for the carry calculation solves the
problem. In addition, partial overlap is rejected from control plane for
all kind of operations including byteorder. This was tested with the
following bytecode:
table test_table ip flags 0 use 1 handle 1
ip test_table test_chain use 3 type filter hook input prio 0 policy accept packets 0 bytes 0 flags 1
ip test_table test_chain 2
[ immediate reg 1 0x44332211 0x88776655 ]
[ bitwise reg 1 = ( reg 1 << 0x08000000 ) ]
[ cmp eq reg 1 0x66443322 0x00887766 ]
[ counter pkts 0 bytes 0 ]
ip test_table test_chain 4 3
[ immediate reg 1 0x44332211 0x88776655 ]
[ bitwise reg 1 = ( reg 1 << 0x08000000 ) ]
[ cmp eq reg 1 0x55443322 0x00887766 ]
[ counter pkts 21794 bytes 1917798 ]
Fixes: 567d746b55 ("netfilter: bitwise: add support for shifts.")
Acked-by: Jeremy Sowden <jeremy@azazel.net>
Signed-off-by: Fernando Fernandez Mancera <fmancera@suse.de>
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit b0ccf4f53d ]
Hitherto, these operations have been converted in user space to
mask-and-xor operations on one register and two immediate values, and it
is the latter which have been evaluated by the kernel. We add support
for evaluating these operations directly in kernel space on one register
and either an immediate value or a second register.
Pablo made a few changes to the original patch:
- EINVAL if NFTA_BITWISE_SREG2 is used with fast version.
- Allow _AND,_OR,_XOR with _DATA != sizeof(u32)
- Dump _SREG2 or _DATA with _AND,_OR,_XOR
Signed-off-by: Jeremy Sowden <jeremy@azazel.net>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Stable-dep-of: 18014147d3 ("netfilter: nf_tables: fix dst corruption in same register operation")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit a12143e608 ]
In the next patch we add support for doing AND, OR and XOR operations
directly in the kernel, so rename some functions and an enum constant
related to mask-and-xor boolean operations.
Signed-off-by: Jeremy Sowden <jeremy@azazel.net>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Stable-dep-of: 18014147d3 ("netfilter: nf_tables: fix dst corruption in same register operation")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit f438d1786d ]
Luxiao Xu says:
The function compat_mtw_from_user() converts ebtables extensions from
32-bit user structures to kernel native structures. However, it lacks
proper validation of the user-supplied match_size/target_size.
When certain extensions are processed, the kernel-side translation
logic may perform memory accesses based on the extension's expected
size. If the user provides a size smaller than what the extension
requires, it results in an out-of-bounds read as reported by KASAN.
This fix introduces a check to ensure match_size is at least as large
as the extension's required compatsize. This covers matches, watchers,
and targets, while maintaining compatibility with standard targets.
AFAIU this is relevant for matches that need to go though
match->compat_from_user() call. Those that use plain memcpy with the
user-provided size are ok because the caller checks that size vs the
start of the next rule entry offset (which itself is checked vs. total
size copied from userspace).
The ->compat_from_user() callbacks assume they can read compatsize bytes,
so they need this extra check.
Based on an earlier patch from Luxiao Xu.
Fixes: 81e675c227 ("netfilter: ebtables: add CONFIG_COMPAT support")
Reported-by: Yuan Tan <yuantan098@gmail.com>
Reported-by: Yifan Wu <yifanwucs@gmail.com>
Reported-by: Juefei Pu <tomapufckgml@gmail.com>
Reported-by: Xin Liu <bird@lzu.edu.cn>
Signed-off-by: Luxiao Xu <rakukuip@gmail.com>
Signed-off-by: Ren Wei <n05ec@lzu.edu.cn>
Reviewed-by: Fernando Fernandez Mancera <fmancera@suse.de>
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit c376f07e16 ]
With PREEMPT_RCU we get splat:
BUG: using smp_processor_id() in preemptible [..]
caller is cpu_mt+0x53/0xd0 net/netfilter/xt_cpu.c:37
CPU: 1 .. Comm: syz.3.1377 #0 PREEMPT(full)
Call Trace:
<TASK>
dump_stack_lvl+0xe8/0x150 lib/dump_stack.c:120
check_preemption_disabled+0xd3/0xe0 lib/smp_processor_id.c:47
cpu_mt+0x53/0xd0 net/netfilter/xt_cpu.c:37
[..]
Just use raw version instead.
This is similar to 14d14a5d29 ("netfilter: nft_meta: use raw_smp_processor_id()").
Fixes: 0ca743a559 ("netfilter: nf_tables: add compatibility layer for x_tables")
Reported-by: syzbot+690d3e3ffa7335ac10eb@syzkaller.appspotmail.com
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 92170e6afe ]
synproxy_tstamp_adjust() rewrites the TCP timestamp option in place
and then patches the TCP checksum via inet_proto_csum_replace4() on
the caller-supplied tcphdr pointer. Both ipv4_synproxy_hook() and
ipv6_synproxy_hook() obtain that pointer with skb_header_pointer()
before calling in, so it may either alias skb->head directly or
point at the caller's on-stack _tcph buffer.
Between obtaining the pointer and using it, the function calls
skb_ensure_writable(skb, optend), which on a cloned or non-linear
skb invokes pskb_expand_head() and frees the old skb->head. After
that point the cached th is stale:
caller (ipv[46]_synproxy_hook)
th = skb_header_pointer(skb, ..., &_tcph)
synproxy_tstamp_adjust(skb, protoff, th, ...)
skb_ensure_writable(skb, optend)
pskb_expand_head() /* kfree(old skb->head) */
...
inet_proto_csum_replace4(&th->check, ...)
/* writes into freed head, or
into the caller's stack copy
leaving the on-wire checksum
stale */
The option bytes are written through skb->data and are fine; only
the checksum update goes through th and so lands in the wrong
place. The result is either a write into freed slab memory or a
packet leaving with a checksum that does not match its payload.
Fix by re-deriving th from skb->data + protoff immediately after
skb_ensure_writable() succeeds, so the subsequent checksum update
targets the linear, writable header.
Fixes: 48b1de4c11 ("netfilter: add SYNPROXY core/target")
Assisted-by: kres (claude-opus-4-7)
Signed-off-by: Chris Mason <clm@meta.com>
Reviewed-by: Fernando Fernandez Mancera <fmancera@suse.de>
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 742b04d055 ]
Leo Lin reported OOB write issue in esp component:
xfrm_state_mtu() returns u32 but performs its arithmetic in unsigned
modulo-2^32 space using an attacker-influenced "header_len + authsize +
net_adj" subtracted from a small "mtu" argument. A nobody user can
install an IPv4 ESP tunnel SA with a large authentication key
(XFRMA_ALG_AUTH_TRUNC, e.g. hmac(sha512), 64-byte key, 64-byte trunc),
configure a small interface MTU (68 bytes), and set XFRMA_TFCPAD to a
large value. When a single UDP datagram is then sent through the
tunnel, xfrm_state_mtu() underflows to a near-2^32 value, and
esp_output() consumes it as a signed int via:
padto = min(x->tfcpad, xfrm_state_mtu(x, mtu_cached))
esp.tfclen = padto - skb->len (assigned to int)
esp.tfclen ends up negative (e.g. -207). It is sign-extended to size_t
when passed to memset() inside esp_output_fill_trailer(), producing a
~16 EB write of zeroes at skb_tail_pointer(skb). KASAN logs it as
"Write of size 18446744073709551537 at addr ffff888...".
Check for underflow and return 1. This causes the sendmsg attempt to
fail with ENETUNREACH.
Fixes: c5c2523893 ("[XFRM]: Optimize MTU calculation")
Reported-by: Leo Lin <leo@depthfirst.com>
Assisted-by: Codex:26.506.31004
Signed-off-by: David Ahern <dahern@nvidia.com>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit b493ea2765 ]
A race condition exists in the NFC LLCP connection state machine where
the connection acceptance packet (CC) can be processed concurrently with
socket release. This can lead to a use-after-free of the socket object.
When nfc_llcp_recv_cc() moves the socket from the connecting_sockets
list to the sockets list, it does so without holding the socket lock.
If llcp_sock_release() is executing concurrently, it might have already
unlinked the socket and dropped its references, which can result in
nfc_llcp_recv_cc() linking a freed socket into the live list.
Fix this by holding lock_sock() during the state transition and list
movement in nfc_llcp_recv_cc(). After acquiring the lock, check if
the socket is still hashed to ensure it hasn't already been unlinked
and marked for destruction by the release path. This aligns the locking
pattern with recv_hdlc() and recv_disc().
Fixes: a69f32af86 ("NFC: Socket linked list")
Signed-off-by: Lee Jones <lee@kernel.org>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20260429134115.3558604-2-lee@kernel.org
Signed-off-by: David Heidelberg <david@ixit.cz>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit f4268b4661 ]
llcp_sock_release() unconditionally unlinks the socket from the local
sockets list. However, if the socket is still in connecting state, it
is on the connecting list.
Fix this by checking the socket state and unlinking from the correct list.
Fixes: b4011239a0 ("NFC: llcp: Fix non blocking sockets connections")
Signed-off-by: Lee Jones <lee@kernel.org>
Link: https://patch.msgid.link/20260429134115.3558604-1-lee@kernel.org
Signed-off-by: David Heidelberg <david@ixit.cz>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 9d724b34fb ]
If an error occurs during register_netdev() for the first MAC in
cpsw_register_ports(), even though cpsw->slaves[0].ndev is set to NULL,
cpsw->slaves[1].ndev would remain unchanged. This could later cause
cpsw_unregister_ports() to attempt unregistering the second MAC.
To address this, add a check for ndev->reg_state before calling
unregister_netdev(). With this change, setting cpsw->slaves[i].ndev
to NULL becomes unnecessary and can be removed accordingly.
Fixes: ed3525eda4 ("net: ethernet: ti: introduce cpsw switchdev based driver part 1 - dual-emac")
Signed-off-by: Kevin Hao <haokexin@gmail.com>
Cc: stable@vger.kernel.org
Reviewed-by: Alexander Sverdlin <alexander.sverdlin@gmail.com>
Link: https://patch.msgid.link/20260205-cpsw-error-path-v1-2-6e58bae6b299@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Wenshan Lan <jetlan9@163.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 20a8e451ec ]
In the previous patch ("bcache: fix cached_dev.sb_bio use-after-free and
crash"), we adopted a simple modification suggestion from AI to fix the
use-after-free.
But in actual testing, we found an extreme case where the device is
stopped before calling bch_write_bdev_super().
At this point, struct closure sb_write has not been initialized yet.
For this patch, we ensure that sb_bio has been completed via
sb_write_mutex.
Signed-off-by: Mingzhe Zou <mingzhe.zou@easystack.cn>
Signed-off-by: Coly Li <colyli@fnnas.com>
Link: https://patch.msgid.link/20260403042135.2221247-1-colyli@fnnas.com
Fixes: fec114a98b ("bcache: fix cached_dev.sb_bio use-after-free and crash")
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit a6a9bc544b ]
Syed Faraz Abrar (@farazsth98) from Zellic, and Pumpkin (@u1f383) from
DEVCORE Research Team working with Trend Micro Zero Day Initiative
report that a RTM_GETNEIGH will return uninitalised data in the pad
bytes of the ndmsg data.
Ensure we're initialising the netlink data to zero, in the link, addr
and neigh response messages.
Fixes: 831119f887 ("mctp: Add neighbour netlink interface")
Fixes: 06d2f4c583 ("mctp: Add netlink route management")
Fixes: 583be982d9 ("mctp: Add device handling and netlink interface")
Signed-off-by: Jeremy Kerr <jk@codeconstruct.com.au>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20260209-dev-mctp-nlmsg-v1-1-f1e30c346a43@codeconstruct.com.au
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Li hongliang <1468888505@139.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 65782b2db7 ]
Like pointed out by Sashiko [1], since commit ed76f5edcc ("net: sched:
protect filter_chain list with filter_chain_lock mutex") TC filters are
added to a shared block and published to datapath before their ->change()
function is called. This is a problem for cls_fw: an invalid filter
created with the "old" method can still classify some packets before it
is destroyed by the validation logic added by Xiang.
Therefore, insisting with repeated runs of the following script:
# ip link add dev crash0 type dummy
# ip link set dev crash0 up
# mausezahn crash0 -c 100000 -P 10 \
> -A 4.3.2.1 -B 1.2.3.4 -t udp "dp=1234" -q &
# sleep 1
# tc qdisc add dev crash0 egress_block 1 clsact
# tc filter add block 1 protocol ip prio 1 matchall \
> action skbedit mark 65536 continue
# tc filter add block 1 protocol ip prio 2 fw
# ip link del dev crash0
can still make fw_classify() hit the WARN_ON() in [2]:
WARNING: ./include/net/pkt_cls.h:88 at fw_classify+0x244/0x250 [cls_fw], CPU#18: mausezahn/1399
Modules linked in: cls_fw(E) act_skbedit(E)
CPU: 18 UID: 0 PID: 1399 Comm: mausezahn Tainted: G E 7.0.0-rc6-virtme #17 PREEMPT(full)
Tainted: [E]=UNSIGNED_MODULE
Hardware name: Red Hat KVM, BIOS 1.16.3-2.el9 04/01/2014
RIP: 0010:fw_classify+0x244/0x250 [cls_fw]
Code: 5c 49 c7 45 00 00 00 00 00 41 5d 41 5e 41 5f 5d c3 cc cc cc cc 5b b8 ff ff ff ff 41 5c 41 5d 41 5e 41 5f 5d c3 cc cc cc cc 90 <0f> 0b 90 eb a0 0f 1f 80 00 00 00 00 90 90 90 90 90 90 90 90 90 90
RSP: 0018:ffffd1b7026bf8a8 EFLAGS: 00010202
RAX: ffff8c5ac9c60800 RBX: ffff8c5ac99322c0 RCX: 0000000000000004
RDX: 0000000000000001 RSI: ffff8c5b74d7a000 RDI: ffff8c5ac8284f40
RBP: ffffd1b7026bf8d0 R08: 0000000000000000 R09: ffffd1b7026bf9b0
R10: 00000000ffffffff R11: 0000000000000000 R12: 0000000000010000
R13: ffffd1b7026bf930 R14: ffff8c5ac8284f40 R15: 0000000000000000
FS: 00007fca40c37740(0000) GS:ffff8c5b74d7a000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 00007fca40e822a0 CR3: 0000000005ca0001 CR4: 0000000000172ef0
Call Trace:
<TASK>
tcf_classify+0x17d/0x5c0
tc_run+0x9d/0x150
__dev_queue_xmit+0x2ab/0x14d0
ip_finish_output2+0x340/0x8f0
ip_output+0xa4/0x250
raw_sendmsg+0x147d/0x14b0
__sys_sendto+0x1cc/0x1f0
__x64_sys_sendto+0x24/0x30
do_syscall_64+0x126/0xf80
entry_SYSCALL_64_after_hwframe+0x77/0x7f
RIP: 0033:0x7fca40e822ba
Code: d8 64 89 02 48 c7 c0 ff ff ff ff eb b8 0f 1f 00 f3 0f 1e fa 41 89 ca 64 8b 04 25 18 00 00 00 85 c0 75 15 b8 2c 00 00 00 0f 05 <48> 3d 00 f0 ff ff 77 7e c3 0f 1f 44 00 00 41 54 48 83 ec 30 44 89
RSP: 002b:00007ffc248a42c8 EFLAGS: 00000246 ORIG_RAX: 000000000000002c
RAX: ffffffffffffffda RBX: 000055ef233289d0 RCX: 00007fca40e822ba
RDX: 000000000000001e RSI: 000055ef23328c30 RDI: 0000000000000003
RBP: 000055ef233289d0 R08: 00007ffc248a42d0 R09: 0000000000000010
R10: 0000000000000000 R11: 0000000000000246 R12: 000000000000001e
R13: 00000000000186a0 R14: 0000000000000000 R15: 00007fca41043000
</TASK>
irq event stamp: 1045778
hardirqs last enabled at (1045784): [<ffffffff864ec042>] __up_console_sem+0x52/0x60
hardirqs last disabled at (1045789): [<ffffffff864ec027>] __up_console_sem+0x37/0x60
softirqs last enabled at (1045426): [<ffffffff874d48c7>] __alloc_skb+0x207/0x260
softirqs last disabled at (1045434): [<ffffffff874fe8f8>] __dev_queue_xmit+0x78/0x14d0
Then, because of the value in the packet's mark, dereference on 'q->handle'
with NULL 'q' occurs:
BUG: kernel NULL pointer dereference, address: 0000000000000038
[...]
RIP: 0010:fw_classify+0x1fe/0x250 [cls_fw]
[...]
Skip "old-style" classification on shared blocks, so that the NULL
dereference is fixed and WARN_ON() is not hit anymore in the short
lifetime of invalid cls_fw "old-style" filters.
[1] https://sashiko.dev/#/patchset/20260331050217.504278-1-xmei5%40asu.edu
[2] https://elixir.bootlin.com/linux/v7.0-rc6/source/include/net/pkt_cls.h#L86
Fixes: faeea8bbf6 ("net/sched: cls_fw: fix NULL pointer dereference on shared blocks")
Fixes: ed76f5edcc ("net: sched: protect filter_chain list with filter_chain_lock mutex")
Acked-by: Jamal Hadi Salim <jhs@mojatatu.com>
Signed-off-by: Davide Caratti <dcaratti@redhat.com>
Link: https://patch.msgid.link/e39cbd3103a337f1e515d186fe697b4459d24757.1775661704.git.dcaratti@redhat.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
commit 2905281cbd upstream.
nexio_read_data() pulls data_len and x_len from a packed __be16 header
in the device's interrupt packet and then walks packet->data[0..x_len)
and packet->data[x_len..data_len) comparing each byte against a
threshold.
Both fields are 16-bit on the wire (max 65535). The existing
adjustments shave at most 0x100 / 0x80 off, so the loop bound can still
reach roughly 0xfeff. The URB transfer buffer for NEXIO is rept_size
(1024) bytes from usb_alloc_coherent(), with the first 7 occupied by the
packed header — so packet->data[] has 1017 valid bytes. read_data()
callbacks are not given urb->actual_length, and nothing else bounds the
walk.
A device that lies about its length can get a ~64 KiB out-of-bounds read
past the coherent DMA allocation. The first index whose byte exceeds
NEXIO_THRESHOLD lands in begin_x / begin_y and from there into the
reported touch coordinates, so adjacent kernel memory contents leak to
userspace as ABS_X / ABS_Y events. Far enough out, the read can also
hit an unmapped page and fault.
Fix this all by clamping data_len to the buffer's data[] capacity and
x_len to data_len.
Cc: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Fixes: 5197424cdc ("Input: usbtouchscreen - add NEXIO (or iNexio) support")
Cc: stable <stable@kernel.org>
Assisted-by: gkh_clanker_t1000
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Link: https://patch.msgid.link/2026042026-chlorine-epidermis-fd6d@gregkh
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 43a1e37445 upstream.
Nicholas Carlini reports that the keyring code calls assoc_array_find()
in find_key_to_update() without holding the RCU read lock, while the
assoc_array_gc() code really is designed around removing the node from
the tree and then freeing it after an RCU grace-period.
The regular key handling doesn't see this because holding the keyring
semaphore hides any lifetime issues, but the persistent key handling
uses a different model.
Instead of extending the keyring locking, just do the simple RCU locking
that the assoc_array was designed for.
Reported-by: Nicholas Carlini <npc@anthropic.com>
Cc: David Howells <dhowells@redhat.com>
Cc: Jarkko Sakkinen <jarkko@kernel.org>
Cc: Paul Moore <paul@paul-moore.com>
Cc: James Morris James Morris <jmorris@namei.org>
Cc: Serge E. Hallyn <serge@hallyn.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 1c856e158f ]
KPROBE_HIT_SS and KPROBE_REENTER are two types of fatal recursions that
can not be safely recovered in kprobes.
KPROBE_HIT_SS means that a kprobe is hit during single-stepping. At
this point, the architecture-specific single-step context is already
active. Nested single-stepping would corrupt the state, as the kprobe
control block (kcb) and hardware registers cannot safely store multiple
levels of stepping state.
KPROBE_REENTER means that a third-level recursion occurs when a probe
is hit while the system is already handling a nested probe (second-
level). The kcb only provides a single slot (prev_kprobe) to backup the
state. When a third probe is hit, there is no more space to save the
state without corrupting the first-level backup.
Kprobes work by replacing instructions with breakpoints. In order to
execute the original instruction and continue, it must be moved to a
temporary "single-step" slot. Since there is no backup space left to
set up this slot safely, the CPU would be forced to return to the same
original breakpoint address, triggering an endless loop.
Currently, the code only prints a warning and returns. This leads to
an infinite re-entry loop as the CPU repeatedly hits the same trap and
a "stuck" CPU core because preemption was disabled at the start of the
handler and never re-enabled in this early return path.
Fix the logic by:
1. Merging KPROBE_HIT_SS and KPROBE_REENTER cases, as both represent
fatal recursions that cannot be safely recovered.
2. Replacing WARN_ON_ONCE() with BUG() to terminate the system. This
aligns LoongArch with other architectures (x86, arm64, riscv) and
prevents stack overflow while providing diagnostic information.
Fixes: 6d4cc40fb5 ("LoongArch: Add kprobes support")
Signed-off-by: Tiezhu Yang <yangtiezhu@loongson.cn>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 4db79a322d ]
skb_gro_receive() can currently copy frags between the source and GRO
skb, without checking the zerocopy status, and in particular the
SKBFL_MANAGED_FRAG_REFS flag.
When SKBFL_MANAGED_FRAG_REFS is set, the skb doesn't hold a reference
on the pages in shinfo->frags. Appending those frags to another skb's
frags without fixing up the page refcount can lead to UAF.
When either the last skb in the GRO chain (the one we would append
frags to) or the source skb is zerocopy, don't merge the skbs.
Fixes: 753f1ca4e1 ("net: introduce managed frags infrastructure")
Reported-by: Huzaifa Sidhpurwala <huzaifas@redhat.com>
Signed-off-by: Sabrina Dubroca <sd@queasysnail.net>
Reviewed-by: Willem de Bruijn <willemb@google.com>
Link: https://patch.msgid.link/c3b7f906bbfcbdfd7b4fa9d6c18a438870df85be.1779307748.git.sd@queasysnail.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 3d4432d34c ]
The driver passes fw_version directly to devlink_info_version_stored_put()
without ensuring null-termination. While current firmware null-terminates
these strings, the driver should not rely on this behavior. Add explicit
null-termination to prevent potential issues if firmware behavior changes.
Fixes: 45d76f4929 ("pds_core: set up device and adminq")
Signed-off-by: Nikhil P. Rao <nikhil.rao@amd.com>
Link: https://patch.msgid.link/20260520205842.1486718-1-nikhil.rao@amd.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit b809d04099 ]
In mana_hwc_rx_event_handler(), rx_req_idx is derived from
sge->address in DMA-coherent memory. In Confidential VMs
(SEV-SNP/TDX), this memory is shared unencrypted and HW can modify
WQE contents at any time. No bounds check exists on rx_req_idx,
which can lead to an out-of-bounds access into reqs[].
Add bounds check on rx_req_idx in mana_hwc_rx_event_handler() before
using it to index the reqs[] array.
Fixes: ca9c54d2d6 ("net: mana: Add a driver for Microsoft Azure Network Adapter (MANA)")
Signed-off-by: Aditya Garg <gargaditya@linux.microsoft.com>
Reviewed-by: Haiyang Zhang <haiyangz@microsoft.com>
Link: https://patch.msgid.link/20260520051553.857120-1-gargaditya@linux.microsoft.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 18e7bd9f24 ]
Use flush_work() instead of cancel_work_sync() to terminate pending IRQ
work in cs35l56_sdw_remove(). And flush_work() again after masking the
interrupts to flush any queueing that was racing with the masking. This is
the same sequence as cs35l56_sdw_system_suspend().
cs35l56_sdw_interrupt() takes the pm_runtime to prevent the bus powering-
down before the interrupt status can be read and handled. The work releases
this pm_runtime. So cancelling it, instead of flushing, could leave an
unbalanced pm_runtime.
Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Fixes: e496112529 ("ASoC: cs35l56: Add driver for Cirrus Logic CS35L56")
Link: https://patch.msgid.link/20260521123057.988732-1-rf@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit ddf8029623 ]
sk_psock_strp_data_ready() already checks tls_sw_has_ctx_rx() and
defers to psock->saved_data_ready when a TLS RX context is present,
avoiding a conflict with the TLS strparser's ownership of the receive
queue (commit e91de6afa8, "bpf: Fix running sk_skb program types
with ktls").
sk_psock_verdict_data_ready() has no equivalent guard. When a socket
is inserted into a sockmap (BPF_SK_SKB_VERDICT) before TLS RX is
configured, tls_sw_strparser_arm() saves sk_psock_verdict_data_ready
as rx_ctx->saved_data_ready. On data arrival:
tls_data_ready -> tls_strp_data_ready -> tls_rx_msg_ready
-> saved_data_ready() = sk_psock_verdict_data_ready()
-> tcp_read_skb() drains sk_receive_queue via __skb_unlink()
without calling tcp_eat_skb(), so copied_seq is not advanced.
tls_strp_msg_load() then finds tcp_inq() >= full_len (stale), calls
tcp_recv_skb() on the now-empty queue, hits WARN_ON_ONCE(!first), and
returns with rx_ctx->strp.anchor.frag_list pointing at a psock-owned
(potentially freed) skb. tls_decrypt_sg() subsequently walks that
frag_list: use-after-free.
Apply the same fix as sk_psock_strp_data_ready(): if a TLS RX context
is present, call psock->saved_data_ready (sock_def_readable) to wake
recv() waiters and return immediately, leaving the receive queue
untouched. TLS retains sole ownership of the queue and decrypts the
record normally through tls_sw_recvmsg().
Fixes: ef5659280e ("bpf, sockmap: Allow skipping sk_skb parser program")
Signed-off-by: Xingwang Xiang <v3rdant.xiang@gmail.com>
Link: https://patch.msgid.link/20260517145630.20521-2-v3rdant.xiang@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit dd1dda6b8d ]
The setup_packet of control urb is not freed if usb_submit_urb fails or
the submitted urb is killed. Add free in these two paths.
Fixes: a1c49c434e ("Bluetooth: btusb: Add protocol support for MediaTek MT7668U USB devices")
Signed-off-by: Jiajia Liu <liujiajia@kylinos.cn>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit d019930b00 ]
Move btusb_mtk_hci_wmt_sync from btusb.c to btmtk.c which holds
vendor specific stuff and would make btusb.c clean.
Add usb.h header to btmtksdio.c/btmtkuart.c for usb related element
defined in btmtk.h
Signed-off-by: Sean Wang <sean.wang@mediatek.com>
Signed-off-by: Chris Lu <chris.lu@mediatek.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Stable-dep-of: dd1dda6b8d ("Bluetooth: btmtk: fix urb->setup_packet leak in error paths")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 4c0c28f2bb ]
Extract the function btusb_mtk_subsys_reset from the btusb_mtk_reset
for the future handling of resetting bluetooth controller without
the USB reset.
Co-developed-by: Sean Wang <sean.wang@mediatek.com>
Signed-off-by: Sean Wang <sean.wang@mediatek.com>
Signed-off-by: Hao Qin <hao.qin@mediatek.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Stable-dep-of: dd1dda6b8d ("Bluetooth: btmtk: fix urb->setup_packet leak in error paths")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 00f993fdec ]
Include a shared function to get the firmware name, to prevent repeating
code for similar chipsets.
Signed-off-by: Sean Wang <sean.wang@mediatek.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Stable-dep-of: dd1dda6b8d ("Bluetooth: btmtk: fix urb->setup_packet leak in error paths")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 576ec047d2 ]
hist_field_name() returns "" everywhere except the fully-qualified
VAR_REF/EXPR case, where snprintf() truncation returns NULL early
and bypasses the bottom NULL->"" guard. Callers don't expect NULL:
strcat(expr, hist_field_name(field, 0)) at trace_events_hist.c:1758
and the strcmp() in the sort-key match loop at :4804 both deref it.
system and event_name are bounded by MAX_EVENT_NAME_LEN, but the
field name on a VAR_REF is kstrdup'd from a histogram variable
name parsed out of the trigger string and has no length cap, so
a long enough var name in a fully qualified reference can reach
the truncation path.
Keep the length check but leave field_name as "" on overflow.
Link: https://patch.msgid.link/20260508195747.25492-1-devnexen@gmail.com
Fixes: 5ec1d1e97d ("tracing: Rebuild full_name on each hist_field_name() call")
Signed-off-by: David Carlier <devnexen@gmail.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 60a1969fae ]
seq_ump_process_event() borrows client->out_rfile.output without
synchronizing with the first-open and last-close transition in
seq_ump_client_open() and seq_ump_client_close().
The last output unuse can therefore drop opened[STR_OUT] to zero and
release the rawmidi file while an in-flight event_input callback is still
inside snd_rawmidi_kernel_write(). That leaves the rawmidi substream
runtime exposed to teardown before the write path has taken its own
buffer reference.
Add a per-client rwlock for the event_input-visible output file. Publish
a newly opened output file under the write side, and hold the read side
from the output lookup through snd_rawmidi_kernel_write(). The last
output close copies and clears the visible output file under the write
side, then drops the lock and releases the saved rawmidi file. Use
IRQ-safe rwlock guards because event_input can also be reached from
atomic sequencer delivery.
The buggy scenario involves two paths, with each column showing the
order within that path:
path A label: event_input path path B label: last unuse path
1. seq_ump_process_event() reads 1. seq_ump_client_close()
client->out_rfile.output. drops opened[STR_OUT] to zero.
2. snd_rawmidi_kernel_write1() 2. snd_rawmidi_kernel_release()
has not yet pinned runtime. closes the output file.
3. The writer continues using 3. close_substream() frees
the borrowed substream. substream->runtime.
This keeps the output substream and runtime alive for the full
event_input write while keeping rawmidi release outside the rwlock.
KASAN reproduced this as a slab-use-after-free in
snd_rawmidi_kernel_write1(), with allocation through
seq_ump_use()/snd_seq_port_connect() and free through
seq_ump_unuse()/snd_seq_port_disconnect().
Suggested-by: Takashi Iwai <tiwai@suse.de>
Validation reproduced this kernel report:
KASAN slab-use-after-free in snd_rawmidi_kernel_write1+0x9d/0x400
RIP: 0033:0x7f5528af837f
Read of size 8
Call trace:
dump_stack_lvl+0x73/0xb0 (?:?)
print_report+0xd1/0x650 (?:?)
srso_alias_return_thunk+0x5/0xfbef5 (?:?)
__virt_addr_valid+0x1a7/0x340 (?:?)
kasan_complete_mode_report_info+0x64/0x200 (?:?)
kasan_report+0xf7/0x130 (?:?)
snd_rawmidi_kernel_write1+0x9d/0x400 (?:?)
__asan_load8+0x82/0xb0 (?:?)
update_stack_state+0x1ef/0x2d0 (?:?)
snd_rawmidi_kernel_write+0x1a/0x20 (?:?)
seq_ump_process_event+0xd4/0x120 (sound/core/seq/seq_ump_client.c:82)
__snd_seq_deliver_single_event+0x8a/0xe0 (?:?)
snd_seq_deliver_from_ump+0x2b2/0xd60 (?:?)
lock_acquire+0x14e/0x2e0 (?:?)
find_held_lock+0x31/0x90 (?:?)
snd_seq_port_use_ptr+0xa6/0xe0 (?:?)
__kasan_check_write+0x18/0x20 (?:?)
do_raw_read_unlock+0x32/0xa0 (?:?)
_raw_read_unlock+0x26/0x50 (?:?)
snd_seq_deliver_single_event+0x45c/0x4b0 (?:?)
snd_seq_deliver_event+0x10d/0x1b0 (?:?)
snd_seq_client_enqueue_event+0x192/0x240 (?:?)
snd_seq_write+0x2cd/0x450 (?:?)
apparmor_file_permission+0x20/0x30 (?:?)
security_file_permission+0x51/0x60 (?:?)
vfs_write+0x1ce/0x850 (?:?)
__fget_files+0x12b/0x220 (?:?)
lock_release+0xc8/0x2a0 (?:?)
__rcu_read_unlock+0x74/0x2d0 (?:?)
__fget_files+0x135/0x220 (?:?)
ksys_write+0x15a/0x180 (?:?)
rcu_is_watching+0x24/0x60 (?:?)
__x64_sys_write+0x46/0x60 (?:?)
x64_sys_call+0x7d/0x20d0 (?:?)
do_syscall_64+0xc1/0x360 (arch/x86/entry/syscall_64.c:87)
entry_SYSCALL_64_after_hwframe+0x77/0x7f (?:?)
Fixes: 81fd444aa3 ("ALSA: seq: Bind UMP device")
Signed-off-by: Zhang Cen <rollkingzzc@gmail.com>
Link: https://patch.msgid.link/20260520103249.3048345-1-rollkingzzc@gmail.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 5431fdd2c1 ]
Created as testing for the conditional guard infrastructure.
Specifically this makes use of the following form:
scoped_cond_guard (mutex_intr, return -ERESTARTNOINTR,
&task->signal->cred_guard_mutex) {
...
}
...
return 0;
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Oleg Nesterov <oleg@redhat.com>
Link: https://lkml.kernel.org/r/20231102110706.568467727%40infradead.org
Stable-dep-of: 60a1969fae ("ALSA: seq: Serialize UMP output teardown with event_input")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit dc416e32ba ]
debugfs_lookup() returns a dentry with an elevated reference count that
must be released with dput(). The current code discards the returned
dentry without calling dput(), causing a reference leak on every
firmware reset recovery.
Additionally, when CONFIG_DEBUG_FS is disabled, debugfs_lookup()
returns ERR_PTR(-ENODEV), not NULL. The current check passes for error
pointers and would call dput() on an invalid pointer, causing a crash.
Fixes: bc90fbe0c3 ("pds_core: Rework teardown/setup flow to be more common")
Signed-off-by: Nikhil P. Rao <nikhil.rao@amd.com>
Link: https://patch.msgid.link/20260515212907.998028-3-nikhil.rao@amd.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 0e46b6635b ]
Fix two cases where pdsc_devcmd_wait() returns stale success from
the completion register instead of an error:
1. FW crash: If firmware stops running, the wait loop breaks early with
running=false. The condition "if ((!done || timeout) && running)" is
false, so error handling is bypassed and stale status is returned.
Check !running first and return -ENXIO.
2. Timeout: If a command times out, err is set to -ETIMEDOUT but then
overwritten by pdsc_err_to_errno(status) which reads stale status.
Return -ETIMEDOUT immediately after cleaning up.
Both errors now propagate to pdsc_devcmd_locked() which queues
health_work for recovery.
Fixes: 45d76f4929 ("pds_core: set up device and adminq")
Signed-off-by: Nikhil P. Rao <nikhil.rao@amd.com>
Link: https://patch.msgid.link/20260515212907.998028-1-nikhil.rao@amd.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 4df78ff026 ]
When per-VLAN multicast snooping is enabled, the bridge iterates over
all the bridge ports, disables the per-port multicast context on each
port and enables the per-{port, VLAN} multicast contexts instead. The
reverse happens when per-VLAN multicast snooping is disabled.
When global multicast snooping is enabled, the bridge iterates over all
the bridge ports and enables the per-port multicast context on each
port. The reverse happens when multicast snooping is disabled.
The above scheme can result in a situation where both types of contexts
(per-port and per-{port, VLAN}) are enabled on a single bridge port:
# ip link add name br1 up type bridge mcast_snooping 1 mcast_querier 1 vlan_filtering 1
# ip link add name dummy1 up master br1 type dummy
# ip link set dev br1 type bridge mcast_vlan_snooping 1
# ip link set dev br1 type bridge mcast_snooping 0
# ip link set dev br1 type bridge mcast_snooping 1
This is not intended and it is a problem since the commit cited below.
Prior to this commit, when removing a bridge port,
br_multicast_disable_port() would disable the per-port multicast context
and the per-{port, VLAN} multicast contexts would get disabled when
flushing VLANs.
After this commit, br_multicast_disable_port() only disables the
per-port multicast context if per-VLAN multicast snooping is disabled.
If both types of contexts were enabled on the port when it was removed,
the per-port multicast context would remain enabled when freeing the
bridge port, leading to a use-after-free [1].
Fix by preventing the bridge from enabling / disabling the per-port
multicast contexts when toggling global multicast snooping if per-VLAN
multicast snooping is enabled.
[1]
ODEBUG: free active (active state 0) object: ffff88810f8bda78 object type: timer_list hint: br_ip6_multicast_port_query_expired (net/bridge/br_multicast.c:1927)
WARNING: lib/debugobjects.c:629 at debug_print_object+0x1b1/0x3e0, CPU#5: swapper/5/0
[...]
Call Trace:
<IRQ>
__debug_check_no_obj_freed (lib/debugobjects.c:1116)
kfree (mm/slub.c:2620 mm/slub.c:6250 mm/slub.c:6565)
kobject_cleanup (lib/kobject.c:689)
rcu_do_batch (kernel/rcu/tree.c:2617)
rcu_core (kernel/rcu/tree.c:2869)
handle_softirqs (kernel/softirq.c:622)
__irq_exit_rcu (kernel/softirq.c:656 kernel/softirq.c:496 kernel/softirq.c:735)
irq_exit_rcu (kernel/softirq.c:752)
sysvec_apic_timer_interrupt (arch/x86/kernel/apic/apic.c:1061 (discriminator 47) arch/x86/kernel/apic/apic.c:1061 (discriminator 47))
</IRQ>
Fixes: 4b30ae9adb ("net: bridge: mcast: re-implement br_multicast_{enable, disable}_port functions")
Reported-by: syzbot+ae231e0552fa77b26ea1@syzkaller.appspotmail.com
Closes: https://lore.kernel.org/netdev/87qznowlfs.ffs@tglx/
Reported-by: Thomas Gleixner <tglx@kernel.org>
Acked-by: Nikolay Aleksandrov <nikolay@nvidia.com>
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Link: https://patch.msgid.link/20260517121122.188333-2-idosch@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 68800bbf58 ]
When forwarding multicast packets, the bridge takes MDB into account when
IGMP / MLD snooping is enabled. Currently, when snooping is disabled, the
MDB is retained, even though it is not used anymore.
At the same time, during the time that snooping is disabled, the IGMP / MLD
control packets are obviously ignored, and after the snooping is reenabled,
the administrator has to assume it is out of sync. In particular, missed
join and leave messages would lead to traffic being forwarded to wrong
interfaces.
Keeping the MDB entries around thus serves no purpose, and just takes
memory. Note also that disabling per-VLAN snooping does actually flush the
relevant MDB entries.
This patch flushes non-permanent MDB entries as global snooping is
disabled.
Signed-off-by: Petr Machata <petrm@nvidia.com>
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Acked-by: Nikolay Aleksandrov <razor@blackwall.org>
Link: https://patch.msgid.link/5e992df1bb93b88e19c0ea5819e23b669e3dde5d.1761228273.git.petrm@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Stable-dep-of: 4df78ff026 ("bridge: mcast: Fix a possible use-after-free when removing a bridge port")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 5b74373390 ]
In the error path of rtrs_srv_create_path_files(), the sysfs root folders
may already have been created and srv_path->kobj may already have been
initialized. If a later step fails, the cleanup currently calls
kobject_put(&srv_path->kobj) before
rtrs_srv_destroy_once_sysfs_root_folders(srv_path).
kobject_put() may drop the last reference to srv_path->kobj and invoke the
release callback, rtrs_srv_release(), which frees srv_path. The following
call to rtrs_srv_destroy_once_sysfs_root_folders(srv_path) then
dereferences srv_path internally to access srv_path->srv, resulting in a
use-after-free.
This failure path is reached before rtrs_srv_create_path_files() returns
success, so the successful-path lifetime handling is not involved.
Fix this by destroying the sysfs root folders before calling
kobject_put(&srv_path->kobj), so srv_path is still valid while the helper
accesses it.
This issue was found by a static analysis tool I am developing.
Fixes: ae4c81644e ("RDMA/rtrs-srv: Rename rtrs_srv_sess to rtrs_srv_path")
Signed-off-by: Guangshuo Li <lgs201920130244@gmail.com>
Link: https://patch.msgid.link/20260514113834.865530-1-lgs201920130244@gmail.com
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 35f0f0a253 ]
In mana_hwc_rx_event_handler(), resp->response.hwc_msg_id is read from
DMA-coherent memory and bounds-checked, then mana_hwc_handle_resp()
re-reads the same field from the same DMA buffer for test_bit() and
pointer arithmetic.
DMA-coherent memory is mapped uncacheable on x86 and is shared,
unencrypted, in Confidential VMs (SEV-SNP/TDX), so each load goes
directly to host-visible memory. A H/W can modify the value
between the check and the use, bypassing the bounds validation.
Fix this by reading hwc_msg_id exactly once using READ_ONCE() into a
stack-local variable in mana_hwc_rx_event_handler(), and passing the
validated value as a parameter to mana_hwc_handle_resp().
Fixes: ca9c54d2d6 ("net: mana: Add a driver for Microsoft Azure Network Adapter (MANA)")
Signed-off-by: Erni Sri Satya Vennela <ernis@linux.microsoft.com>
Link: https://patch.msgid.link/20260514194156.466823-1-ernis@linux.microsoft.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 3ac85bcfd4 ]
The BPC, RGAC1 and RGAC2 registers control the handling of link-local
frames with reserved MAC DAs (01:80:C2:00:00:0x). These frames are
correctly trapped to the CPU port, but the egress VLAN tag attribute was
set to MT7530_VLAN_EG_UNTAGGED which causes the switch to strip any
VLAN tags from trapped frames before they reach the CPU.
This causes VLAN-tagged link-local frames (STP BPDUs, LLDP, PTP Peer
Delay Requests) to arrive at the CPU without their VLAN tag, so they
are delivered to the base network interface instead of the VLAN
sub-interface. The DSA local_termination selftest confirms this: all
link-local protocol tests on VLAN upper interfaces fail.
Set the EG_TAG attribute to MT7530_VLAN_EG_DISABLED (system default)
so that the switch does not modify VLAN tags in trapped frames. This
way VLAN-tagged frames retain their original tag and are delivered to
the correct VLAN sub-interface, matching the behavior of non-trapped
frames which pass through without VLAN tag modification.
Fixes: 69ddba9d17 ("net: dsa: mt7530: fix handling of all link-local frames")
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
Acked-by: Chester A. Unal <chester.a.unal@arinc9.com>
Link: https://patch.msgid.link/891e0cd34db2a5fe20ceb73283a81fb5f71427ca.1778766629.git.daniel@makrotopia.org
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Fernando Fernandez Mancera
Jeremy Sowden
Florian Westphal
Chris Mason
Carl Lee
David Ahern
Lee Jones
Kevin Hao
Mingzhe Zou
Carlos Eduardo Gallo Filho
Victor Nogueria
Jeremy Kerr
Davide Caratti
Greg Kroah-Hartman
Linus Torvalds
Tiezhu Yang
Sabrina Dubroca
Nikhil P. Rao
Su Hui
Aditya Garg
Richard Fitzgerald
Bartosz Golaszewski
Andy Shevchenko
Jani Nikula
Xingwang Xiang
Rosen Penev
Jiajia Liu
Chris Lu
Hao Qin
Sean Wang
David Carlier
Zhang Cen
Takashi Iwai
Peter Zijlstra
Ido Schimmel
Petr Machata
Guangshuo Li
Rafael J. Wysocki
Erni Sri Satya Vennela
Daniel Golle