The register macros are used to read and write to the switch registers.
The registers are largely the same on Sparx5 and lan969x, however in some
cases they differ. The differences can be one or more of the following:
target size, register address, register count, group address, group
count, group size, field position, field size.
In order to handle these differences, we introduce a new indirection
layer, that defines and maps them to corresponding values, based on the
platform. As the register macro arguments can now be non-constants, we
also add non-constant variants of FIELD_GET and FIELD_PREP.
Since the indirection layer contributes to longer macros, we have
changed the formatting of them slightly, to adhere to a 80 character
limit, and added a comment if a macro is platform-specific.
With these additions, we can reuse all the existing macros for
lan969x.
Reviewed-by: Steen Hegelund <Steen.Hegelund@microchip.com>
Signed-off-by: Daniel Machon <daniel.machon@microchip.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
In preparation for lan969x, add support for private match data. This
will be needed for abstracting away differences between the Sparx5 and
lan969x platforms. We initially add values for: iomap, iomap size and
ioranges. Update the use of these throughout.
Reviewed-by: Steen Hegelund <Steen.Hegelund@microchip.com>
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Signed-off-by: Daniel Machon <daniel.machon@microchip.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
This patch introduces a diagnostic guide for troubleshooting Twisted
Pair Ethernet variants at OSI Layer 1. It provides detailed steps for
detecting and resolving common link issues, such as incorrect wiring,
cable damage, and power delivery problems. The guide also includes
interface verification steps and PHY-specific diagnostics.
Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de>
Link: https://patch.msgid.link/20241004121824.1716303-1-o.rempel@pengutronix.de
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Oleksij Rempel says:
====================
net: phy: Support master-slave config via device tree
This patch series adds support for configuring the master/slave role of
PHYs via the device tree. A new `master-slave` property is introduced in
the device tree bindings, allowing PHYs to be forced into either master
or slave mode. This is particularly necessary for Single Pair Ethernet
(SPE) PHYs (1000/100/10Base-T1), where hardware strap pins may not be
available or correctly configured, but it is applicable to all PHY
types.
changes v5:
- sync DT options with ethtool nameing.
changes v4:
- add Reviewed-by
- rebase against latest net-next
changes v3:
- rename master-slave to timing-role
- add prefer-master/slave support
====================
Link: https://patch.msgid.link/20241004090100.1654353-1-o.rempel@pengutronix.de
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Introduce support for configuring the master/slave role of PHYs based on
the `timing-role` property in the device tree. While this functionality
is necessary for Single Pair Ethernet (SPE) PHYs (1000/100/10Base-T1)
where hardware strap pins may be unavailable or incorrectly set, it
works for any PHY type.
Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de>
Reviewed-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com>
Reviewed-by: Divya Koppera <divya.koppera@microchip.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
This patch introduces a new `timing-role` property in the device tree
bindings for configuring the master/slave role of PHYs. This is
essential for scenarios where hardware strap pins are unavailable or
incorrectly configured.
The `timing-role` property supports the following values:
- `forced-master`: Forces the PHY to operate as a master (clock source).
- `forced-slave`: Forces the PHY to operate as a slave (clock receiver).
- `preferred-master`: Prefers the PHY to be master but allows negotiation.
- `preferred-slave`: Prefers the PHY to be slave but allows negotiation.
The terms "master" and "slave" are retained in this context to align
with the IEEE 802.3 standards, where they are used to describe the roles
of PHY devices in managing clock signals for data transmission. In
particular, the terms are used in specifications for 1000Base-T and
MultiGBASE-T PHYs, among others. Although there is an effort to adopt
more inclusive terminology, replacing these terms could create
discrepancies between the Linux kernel and the established standards,
documentation, and existing hardware interfaces.
Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de>
Reviewed-by: Rob Herring (Arm) <robh@kernel.org>
Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com>
Reviewed-by: Divya Koppera <divya.koppera@microchip.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
To prepare for constifying the following old driver core API:
struct device *device_find_child(struct device *dev, void *data,
int (*match)(struct device *dev, void *data));
to new:
struct device *device_find_child(struct device *dev, const void *data,
int (*match)(struct device *dev, const void *data));
The new API does not allow its match function (*match)() to modify
caller's match data @*data, but emac_sgmii_acpi_match(), as the old
API's match function, indeed modifies relevant match data, so it is
not suitable for the new API any more, solved by implementing the same
finding sgmii_ops function by correcting the function and using it
as parameter of device_for_each_child() instead of device_find_child().
By the way, this commit does not change any existing logic.
Signed-off-by: Zijun Hu <quic_zijuhu@quicinc.com>
Link: https://patch.msgid.link/20241003-qcom_emac_fix-v6-1-0658e3792ca4@quicinc.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Until now, vmxnet3 was default reporting 10Gbps as link speed.
Vmxnet3 v9 adds support for user to configure higher link speeds.
User can configure the link speed via VMs advanced parameters options
in VCenter. This speed is reported in gbps by hypervisor.
This patch adds support for vmxnet3 to report higher link speeds and
converts it to mbps as expected by Linux stack.
Signed-off-by: Ronak Doshi <ronak.doshi@broadcom.com>
Acked-by: Guolin Yang <guolin.yang@broadcom.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20241004174303.5370-1-ronak.doshi@broadcom.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Eric Dumazet says:
====================
ipv4: preliminary work for per-netns RTNL
Inspired by 9b8ca04854 ("ipv4: avoid quadratic behavior in
FIB insertion of common address") and per-netns RTNL conversion
started by Kuniyuki this week.
ip_fib_check_default() can use RCU instead of a shared spinlock.
fib_info_lock can be removed, RTNL is already used.
fib_info_devhash[] can be removed in favor of a single
pointer in net_device.
====================
Link: https://patch.msgid.link/20241004134720.579244-1-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
fib_devindex_hashfn() converts a 32bit ifindex value to a 8bit hash.
It makes no sense doing this from fib_info_hashfn() and
fib_find_info_nh().
It is better to keep as many bits as possible to let
fib_info_hashfn_result() have better spread.
Only fib_info_devhash_bucket() needs to make this operation,
we can 'inline' trivial fib_devindex_hashfn() in it.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Link: https://patch.msgid.link/20241004134720.579244-2-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
kunit_kzalloc() may fail. Other call sites verify that this is the case,
either using a direct comparison with the NULL pointer, or the
KUNIT_ASSERT_NOT_NULL() or KUNIT_ASSERT_NOT_ERR_OR_NULL().
Pick KUNIT_ASSERT_NOT_NULL() as the error handling method that made most
sense to me. It's an unlikely thing to happen, but at least we call
__kunit_abort() instead of dereferencing this NULL pointer.
Fixes: e9502ea6db ("lib: packing: add KUnit tests adapted from selftests")
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Link: https://patch.msgid.link/20241004110012.1323427-1-vladimir.oltean@nxp.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
'struct mlxsw_afk_element_inst' are not modified in these drivers.
Constifying these structures moves some data to a read-only section, so
increases overall security.
Update a few functions and struct mlxsw_afk_block accordingly.
On a x86_64, with allmodconfig, as an example:
Before:
======
text data bss dec hex filename
4278 4032 0 8310 2076 drivers/net/ethernet/mellanox/mlxsw/spectrum_acl_flex_keys.o
After:
=====
text data bss dec hex filename
7934 352 0 8286 205e drivers/net/ethernet/mellanox/mlxsw/spectrum_acl_flex_keys.o
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Reviewed-by: Simon Horman <horms@kernel.org>
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Link: https://patch.msgid.link/8ccfc7bfb2365dcee5b03c81ebe061a927d6da2e.1727541677.git.christophe.jaillet@wanadoo.fr
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Pull Kbuild fixes from Masahiro Yamada:
- Move non-boot built-in DTBs to the .rodata section
- Fix Kconfig bugs
- Fix maint scripts in the linux-image Debian package
- Import some list macros to scripts/include/
* tag 'kbuild-fixes-v6.12' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild:
kbuild: deb-pkg: Remove blank first line from maint scripts
kbuild: fix a typo dt_binding_schema -> dt_binding_schemas
scripts: import more list macros
kconfig: qconf: fix buffer overflow in debug links
kconfig: qconf: move conf_read() before drawing tree pain
kconfig: clear expr::val_is_valid when allocated
kconfig: fix infinite loop in sym_calc_choice()
kbuild: move non-boot built-in DTBs to .rodata section
Pull x86 platform driver fixes from Hans de Goede:
- Intel PMC fix for suspend/resume issues on some Sky and Kaby Lake
laptops
- Intel Diamond Rapids hw-id additions
- Documentation and MAINTAINERS fixes
- Some other small fixes
* tag 'platform-drivers-x86-v6.12-2' of git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86:
platform/x86: x86-android-tablets: Fix use after free on platform_device_register() errors
platform/x86: wmi: Update WMI driver API documentation
platform/x86: dell-ddv: Fix typo in documentation
platform/x86: dell-sysman: add support for alienware products
platform/x86/intel: power-domains: Add Diamond Rapids support
platform/x86: ISST: Add Diamond Rapids to support list
platform/x86:intel/pmc: Disable ACPI PM Timer disabling on Sky and Kaby Lake
platform/x86: dell-laptop: Do not fail when encountering unsupported batteries
MAINTAINERS: Update Intel In Field Scan(IFS) entry
platform/x86: ISST: Fix the KASAN report slab-out-of-bounds bug
Pull kvm fixes from Paolo Bonzini:
"ARM64:
- Fix pKVM error path on init, making sure we do not change critical
system registers as we're about to fail
- Make sure that the host's vector length is at capped by a value
common to all CPUs
- Fix kvm_has_feat*() handling of "negative" features, as the current
code is pretty broken
- Promote Joey to the status of official reviewer, while James steps
down -- hopefully only temporarly
x86:
- Fix compilation with KVM_INTEL=KVM_AMD=n
- Fix disabling KVM_X86_QUIRK_SLOT_ZAP_ALL when shadow MMU is in use
Selftests:
- Fix compilation on non-x86 architectures"
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm:
x86/reboot: emergency callbacks are now registered by common KVM code
KVM: x86: leave kvm.ko out of the build if no vendor module is requested
KVM: x86/mmu: fix KVM_X86_QUIRK_SLOT_ZAP_ALL for shadow MMU
KVM: arm64: Fix kvm_has_feat*() handling of negative features
KVM: selftests: Fix build on architectures other than x86_64
KVM: arm64: Another reviewer reshuffle
KVM: arm64: Constrain the host to the maximum shared SVE VL with pKVM
KVM: arm64: Fix __pkvm_init_vcpu cptr_el2 error path
Pull powerpc fix from Michael Ellerman:
- Allow r30 to be used in vDSO code generation of getrandom
Thanks to Jason A. Donenfeld
* tag 'powerpc-6.12-3' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux:
powerpc/vdso: allow r30 in vDSO code generation of getrandom
The blank line causes execve() to fail:
# strace ./postinst
execve("./postinst", ...) = -1 ENOEXEC (Exec format error)
strace: exec: Exec format error
+++ exited with 1 +++
However running the scripts via shell does work (at least with bash)
because the shell attempts to execute the file as a shell script when
execve() fails.
Fixes: b611daae5e ("kbuild: deb-pkg: split image and debug objects staging out into functions")
Signed-off-by: Aaron Thompson <dev@aaront.org>
Reviewed-by: Nathan Chancellor <nathan@kernel.org>
Reviewed-by: Nicolas Schier <nicolas@fjasle.eu>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
If we follow "make help" to "make dt_binding_schema", we will see
below error:
$ make dt_binding_schema
make[1]: *** No rule to make target 'dt_binding_schema'. Stop.
make: *** [Makefile:224: __sub-make] Error 2
It should be a typo. So this will fix it.
Fixes: 604a57ba97 ("dt-bindings: kbuild: Add separate target/dependency for processed-schema.json")
Signed-off-by: Xu Yang <xu.yang_2@nxp.com>
Reviewed-by: Nicolas Schier <n.schier@avm.de>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Edward Cree says:
====================
sfc: per-queue stats
This series implements the netdev_stat_ops interface for per-queue
statistics in the sfc driver, partly using existing counters that
were originally added for ethtool -S output.
Changed in v4:
* remove RFC tags
Changed in v3:
* make TX stats count completions rather than enqueues
* add new patch #4 to account for XDP TX separately from netdev
traffic and include it in base_stats
* move the tx_queue->old_* members out of the fastpath cachelines
* note on patch #6 that our hw_gso stats still count enqueues
* RFC since net-next is closed right now
Changed in v2:
* exclude (dedicated) XDP TXQ stats from per-queue TX stats
* explain patch #3 better
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
While this does add overhead to the fast path, it should be minimal
as the cacheline should already be held for write from updating the
queue's rx_packets stat.
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Signed-off-by: Edward Cree <ecree.xilinx@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Use our existing TSO stats, which count enqueued TSO TXes.
Users may expect them to count completions, as tx-packets and
tx-bytes do; however, these are the counters we have, and the
qstats documentation doesn't actually specify.
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Signed-off-by: Edward Cree <ecree.xilinx@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
When we handle a TX completion for an XDP packet, it is not counted
in the per-TXQ netdev stats. Record it in new internal counters,
and include those in the device-wide total in efx_get_base_stats().
Signed-off-by: Edward Cree <ecree.xilinx@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The previous patch changed when we increment the RX queue's rx_packets
counter, to match the semantics of netdev per-queue stats. The
differences between the old and new counts are scatter errors (which
produce a WARN_ON) and this counter, which is incremented by
efx_rx_packet__check_len() when an RX packet (which was placed in a
single buffer by SG, i.e. n_frags == 1) has a length (from the RX
event) which is too long to fit in the RX buffer. If this occurs, we
drop the packet and fire a ratelimited netif_err().
The counter previously was not reported anywhere; add it to ethtool -S
output to ensure users still have this information.
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Signed-off-by: Edward Cree <ecree.xilinx@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Just RX and TX packet counts and TX bytes for now. We do not
have per-queue RX byte counts, which causes us to fail
stats.pkt_byte_sum selftest with "Drivers should always report
basic keys" error.
Per-queue counts are since the last time the queue was inited
(typically by efx_start_datapath(), on ifup or reconfiguration);
device-wide total (efx_get_base_stats()) is since driver probe.
This is not the same lifetime as rtnl_link_stats64, which uses
firmware stats which count since FW (re)booted; this can cause a
"Qstats are lower" or "RTNL stats are lower" failure in
stats.pkt_byte_sum selftest.
Move the increment of rx_queue->rx_packets to match the semantics
specified for netdev per-queue stats, i.e. just before handing
the packet to XDP (if present) or the netstack (through GRO).
This will affect the existing ethtool -S output which also
reports these counters.
XDP TX packets are not yet counted into base_stats.
Signed-off-by: Edward Cree <ecree.xilinx@gmail.com>
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The n_rx_tobe_disc and n_rx_mcast_mismatch counters are a legacy
from farch, and are never written in EF10 or EF100 code. Remove
them from the struct and from ethtool -S output, saving a bit of
memory and avoiding user confusion.
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Signed-off-by: Edward Cree <ecree.xilinx@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
If the battery hook encounters a unsupported battery, it will
return an error. This in turn will cause the battery driver to
automatically unregister the battery hook.
On machines with multiple batteries however, this will prevent
the battery hook from handling the primary battery, since it will
always get unregistered upon encountering one of the unsupported
batteries.
Fix this by simply ignoring unsupported batteries.
Reviewed-by: Pali Rohár <pali@kernel.org>
Fixes: ab58016c68 ("platform/x86:dell-laptop: Add knobs to change battery charge settings")
Signed-off-by: Armin Wolf <W_Armin@gmx.de>
Link: https://lore.kernel.org/r/20241001212835.341788-4-W_Armin@gmx.de
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
KVM/arm64 fixes for 6.12, take #1
- Fix pKVM error path on init, making sure we do not change critical
system registers as we're about to fail
- Make sure that the host's vector length is at capped by a value
common to all CPUs
- Fix kvm_has_feat*() handling of "negative" features, as the current
code is pretty broken
- Promote Joey to the status of official reviewer, while James steps
down -- hopefully only temporarly
Guard them with CONFIG_KVM_X86_COMMON rather than the two vendor modules.
In practice this has no functional change, because CONFIG_KVM_X86_COMMON
is set if and only if at least one vendor-specific module is being built.
However, it is cleaner to specify CONFIG_KVM_X86_COMMON for functions that
are used in kvm.ko.
Reported-by: Linus Torvalds <torvalds@linux-foundation.org>
Fixes: 590b09b1d8 ("KVM: x86: Register "emergency disable" callbacks when virt is enabled")
Fixes: 6d55a94222 ("x86/reboot: Unconditionally define cpu_emergency_virt_cb typedef")
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
kvm.ko is nothing but library code shared by kvm-intel.ko and kvm-amd.ko.
It provides no functionality on its own and it is unnecessary unless one
of the vendor-specific module is compiled. In particular, /dev/kvm is
not created until one of kvm-intel.ko or kvm-amd.ko is loaded.
Use CONFIG_KVM to decide if it is built-in or a module, but use the
vendor-specific modules for the actual decision on whether to build it.
This also fixes a build failure when CONFIG_KVM_INTEL and CONFIG_KVM_AMD
are both disabled. The cpu_emergency_register_virt_callback() function
is called from kvm.ko, but it is only defined if at least one of
CONFIG_KVM_INTEL and CONFIG_KVM_AMD is provided.
Fixes: 590b09b1d8 ("KVM: x86: Register "emergency disable" callbacks when virt is enabled")
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Pull bcachefs fixes from Kent Overstreet:
"A lot of little fixes, bigger ones include:
- bcachefs's __wait_on_freeing_inode() was broken in rc1 due to vfs
changes, now fixed along with another lost wakeup
- fragmentation LRU fixes; fsck now repairs successfully (this is the
data structure copygc uses); along with some nice simplification.
- Rework logged op error handling, so that if logged op replay errors
(due to another filesystem error) we delete the logged op instead
of going into an infinite loop)
- Various small filesystem connectivitity repair fixes"
* tag 'bcachefs-2024-10-05' of git://evilpiepirate.org/bcachefs:
bcachefs: Rework logged op error handling
bcachefs: Add warn param to subvol_get_snapshot, peek_inode
bcachefs: Kill snapshot arg to fsck_write_inode()
bcachefs: Check for unlinked, non-empty dirs in check_inode()
bcachefs: Check for unlinked inodes with dirents
bcachefs: Check for directories with no backpointers
bcachefs: Kill alloc_v4.fragmentation_lru
bcachefs: minor lru fsck fixes
bcachefs: Mark more errors AUTOFIX
bcachefs: Make sure we print error that causes fsck to bail out
bcachefs: bkey errors are only AUTOFIX during read
bcachefs: Create lost+found in correct snapshot
bcachefs: Fix reattach_inode()
bcachefs: Add missing wakeup to bch2_inode_hash_remove()
bcachefs: Fix trans_commit disk accounting revert
bcachefs: Fix bch2_inode_is_open() check
bcachefs: Fix return type of dirent_points_to_inode_nowarn()
bcachefs: Fix bad shift in bch2_read_flag_list()
Pull xen fix from Juergen Gross:
"Fix Xen config issue introduced in the merge window"
* tag 'for-linus-6.12a-rc2-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip:
xen: Fix config option reference in XEN_PRIVCMD definition
Daniel Machon
Oleksij Rempel
Paolo Abeni
Zijun Hu
Daniel Golle
Ronak Doshi
Linus Walleij
Jakub Kicinski
Eric Dumazet
Vladimir Oltean
Christophe JAILLET
Russell King (Oracle)
Menglong Dong
Linus Torvalds
Aaron Thompson
Xu Yang
Sami Tolvanen
Joe Damato
David S. Miller
Edward Cree
Hans de Goede
Armin Wolf
Anaswara T Rajan
Crag Wang
Srinivas Pandruvada
Jithu Joseph
Paolo Bonzini